xref: /titanic_51/usr/src/uts/intel/scsa2usb/Makefile (revision c39ec06460092d7e823aedf427c9b7fc12d475af)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# uts/intel/scsa2usb/Makefile
23# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26#
27#	This makefile drives the production of the scsa2usb driver
28#	kernel module. intel architecture dependent
29#
30
31#
32#	Path to the base of the uts directory tree (usually /usr/src/uts).
33#
34UTSBASE	= ../..
35
36#
37#	Define the module and object file sets.
38#
39MODULE		= scsa2usb
40OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
41LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
42ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
43CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
44WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
45WARLOCK_OK	= $(MODULE).ok
46WLCMD_DIR	= $(UTSBASE)/common/io/warlock
47
48#
49#	Include common rules.
50#
51include $(UTSBASE)/intel/Makefile.intel
52
53#
54#	Define targets
55#
56ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
57LINT_TARGET	= $(MODULE).lint
58INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
59
60#
61#	Override defaults to build a unique, local modstubs.o.
62#
63MODSTUBS_DIR	 = $(OBJS_DIR)
64CLEANFILES	+= $(MODSTUBS_O)
65
66#
67# depends on misc/usba misc/scsi
68#
69LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
70
71#
72# For now, disable these lint checks; maintainers should endeavor
73# to investigate and remove these for maximum lint coverage.
74# Please do not carry these forward to new Makefiles.
75#
76LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
77
78#
79#	Default build targets.
80#
81.KEEP_STATE:
82
83def:		$(DEF_DEPS)
84
85all:		$(ALL_DEPS)
86
87clean:		$(CLEAN_DEPS)
88		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
89
90clobber:	$(CLOBBER_DEPS)
91		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
92
93lint:		$(LINT_DEPS)
94
95modlintlib:	$(MODLINTLIB_DEPS)
96
97clean.lint:	$(CLEAN_LINT_DEPS)
98
99install:	$(INSTALL_DEPS)
100
101#
102#	Include common targets.
103#
104include $(UTSBASE)/intel/Makefile.targ
105
106#
107#	Defines for local commands.
108#
109WARLOCK		= warlock
110WLCC		= wlcc
111TOUCH		= touch
112TEST		= test
113
114#
115#	lock_lint rules
116#
117USBA_FILES = $(USBA_WITHOUT_WUSB_OBJS:%.o=../usba/%.ll)
118UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
119OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
120EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
121SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
122ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
123SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
124CMLB_FILES = $(CMLB_OBJS:%.o=-l ../cmlb/%.ll)
125
126warlock: $(WARLOCK_OK) warlock_with_usba
127
128$(WARLOCK_OK): $(WARLOCK_OUT) $(WLCMD_DIR)/scsa2usb.wlcmd warlock_ddi.files \
129	scsi.files
130	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT)  \
131		../warlock/scsi.ll \
132		$(SCSI_FILES) \
133		-l ../warlock/ddi_dki_impl.ll
134	$(TOUCH) $@
135
136%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
137		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
138		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
139		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
140	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
141
142warlock_with_usba: $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
143	$(WARLOCK_OUT) usba_files \
144	ohci_files ehci_files uhci_files warlock_ddi.files sd.files st.files \
145	cmlb.files scsi.files
146	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
147		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
148		$(SD_FILES) \
149		$(ST_FILES) \
150		$(CMLB_FILES) \
151		$(SCSI_FILES) \
152		$(WARLOCK_OUT) \
153		-l ../warlock/ddi_dki_impl.ll
154
155usba_files:
156	@cd ../usba;pwd; $(MAKE) warlock
157
158uhci_files:
159	@cd ../uhci;pwd; $(MAKE) warlock
160
161ohci_files:
162	@cd ../ohci;pwd; $(MAKE) warlock
163
164ehci_files:
165	@cd ../ehci;pwd; $(MAKE) warlock
166
167warlock_ddi.files:
168	@cd ../warlock; pwd; $(MAKE) warlock
169
170scsi.files:
171	@cd ../scsi; pwd; $(MAKE) warlock
172
173sd.files:
174	@cd ../sd; pwd; $(MAKE) warlock_alone
175
176st.files:
177	@cd ../st; pwd; $(MAKE) warlock_alone
178
179cmlb.files:
180	 @cd ../cmlb; pwd; $(MAKE) warlock
181