xref: /titanic_51/usr/src/uts/i86xpv/Makefile (revision 1e49577a7fcde812700ded04431b49d67cc57d6d)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23# Use is subject to license terms.
24#
25# ident	"%Z%%M%	%I%	%E% SMI"
26#
27#	This makefile drives the production of all implementation architecture
28#	dependent modules for the i86xpv architecture.
29#
30
31UTSBASE = ..
32
33include Makefile.i86xpv
34
35#
36#	The following are x86 specific (rather than i86pc) specific modules
37#	which are required for the i86pc kernel to completely lint. They are
38#	not involved in the build in any other way. In order to minimize
39#	build time, it is assumed that they are up to date.
40#
41INTEL_LIB_DIR	 = $(UTSBASE)/intel/lint-libs/$(OBJS_DIR)
42
43INTEL_LINTS	 = genunix
44
45LINT_LIBS	 = $(LINT_LIB) \
46		   $(GENUNIX_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln) \
47		   $(PARALLEL_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln) \
48		   $(CLOSED_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln) \
49		   $(INTEL_LINTS:%=$(INTEL_LIB_DIR)/llib-l%.ln)
50
51#
52#
53#
54def		:=	TARGET= def
55all		:=	TARGET= all
56install		:=	TARGET= install
57clean		:=	TARGET= clean
58clobber		:=	TARGET= clobber
59lint		:=	TARGET= lint
60lintlib		:=	TARGET= lintlib
61machmodlintlib	:=	TARGET= modlintlib
62modlist		:=	TARGET= modlist
63modlist	modlist.intel :=	NO_STATE= -K $$MODSTATE$$$$
64clean.lint	:=	TARGET= clean.lint
65check		:=	TARGET= check
66
67.KEEP_STATE:
68
69.PARALLEL:	$(PARALLEL_KMODS) $(CLOSED_KMODS) $(XMODS) $(CLOSED_XMODS) \
70		modlist modlist.intel
71
72INITIAL_TARGETS = \
73	genassym \
74	unix
75
76def all clean clobber clean.lint: setup genassym unix .WAIT \
77	$(KMODS) $(CLOSED_KMODS) $(XMODS) $(CLOSED_XMODS)
78
79install: install_platforms setup genassym unix .WAIT \
80	$(KMODS) $(CLOSED_KMODS) $(XMODS) $(CLOSED_XMODS)
81
82# list the modules under i86xpv.
83modlist: unix $(KMODS) $(CLOSED_KMODS) $(XMODS) $(CLOSED_XMODS)
84
85# list the modules for Install -k i86xpv.
86modlist.karch: modlist modlist.intel
87
88modlist.intel:
89	@cd $(SRC)/uts/intel; pwd; $(MAKE) $(NO_STATE) modlist
90
91lintlib:	unix
92
93modlintlib:	$(KMODS) $(CLOSED_KMODS)
94
95genassym unix $(KMODS):	FRC
96	@cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET)
97
98setup: FRC
99
100$(XMODS):	FRC
101	@if [ -f $@/Makefile  ]; then \
102		cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET); \
103	else \
104		true; \
105	fi
106
107$(CLOSED_KMODS):	FRC
108	cd $(CLOSED)/uts/i86xpv/$@; pwd; $(MAKE) $(NO_STATE) $(TARGET)
109
110$(CLOSED_XMODS):	FRC
111	@if [ -f $(CLOSED)/uts/i86xpv/$@/Makefile  ]; then \
112		cd $(CLOSED)/uts/i86xpv/$@; pwd; \
113		    $(MAKE) $(NO_STATE) $(TARGET); \
114	else \
115		true; \
116	fi
117
118install_h check:	FRC
119	@cd sys; pwd; $(MAKE) $(TARGET)
120
121#
122# Definitions for the /platform directory aliases.
123# Currently none for i86xpv.
124#
125PLAT_LINKS	=
126
127#
128# Make the /platform directories.  This is hardwired here because
129# the first stage of the project (KBI) only implements the userland
130# changes, but the only reasonable place to record the aliases is
131# here in kernel land.
132#
133install_platforms:	$(ROOT_PSM_DIR) $(USR_PSM_DIR) \
134			$(ROOT_PLAT_LINKS) $(USR_PLAT_LINKS) \
135			$(OEM_USR_PLAT_LINKS)
136
137#
138#	Full kernel lint target.
139#
140LINT_TARGET	= globallint
141
142# workaround for multiply defined errors
143globallint := LINTFLAGS += -erroff=E_NAME_MULTIPLY_DEF2
144
145globallint:
146	@-$(ECHO) "\nFULL KERNEL: global crosschecks:"
147	@-$(LINT) $(LINTFLAGS) $(LINT_LIBS) 2>&1 | $(LGREP.2)
148
149lint:	lintlib .WAIT modlintlib .WAIT $(INTEL_LINTS) $(LINT_DEPS)
150
151$(INTEL_LINTS):	FRC
152	@cd $(UTSBASE)/intel/$@; pwd; $(MAKE) modlintlib
153
154FRC:
155
156include ../Makefile.targ
157
158#
159# Cross-reference customization: build a cross-reference over all of the
160# i86pc-related directories.
161#
162SHARED_XRDIRS	= ../i86xpv ../i86pc ../intel ../common
163XRDIRS		= $(SHARED_XRDIRS)
164CLOSED_XRDIRS1	= $(SHARED_XRDIRS:../%=../% ../../../closed/uts/%)
165CLOSED_XRDIRS2	= $(CLOSED_XRDIRS1:../../../closed/uts/i86pc=)
166$(CLOSED_BUILD)XRDIRS	= $(CLOSED_XRDIRS2:../../../closed/uts/i86xpv=)
167XRPRUNE	= sun4v sun4u sun4 sfmmu sparc
168
169cscope.out tags: FRC
170	$(XREF) -x $@
171