xref: /titanic_51/usr/src/uts/common/sys/scsi/targets/ses.h (revision 0cd13cbfb4270b840b4bd22ec5f673b2b6a2c02b)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Enclosure Services Device target driver
23  *
24  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
25  * Use is subject to license terms.
26  */
27 
28 #ifndef _SYS_SCSI_TARGETS_SES_H
29 #define	_SYS_SCSI_TARGETS_SES_H
30 
31 #pragma ident	"%Z%%M%	%I%	%E% SMI"
32 
33 #include <sys/note.h>
34 
35 #ifdef	__cplusplus
36 extern "C" {
37 #endif
38 
39 
40 /*
41  * Useful defines and typedefs
42  */
43 #define	EOK			0
44 
45 #define	INVOP			0x10
46 
47 #define	BP_PKT(bp)		((struct scsi_pkt *)(bp)->av_back)
48 #define	SET_BP_PKT(bp, s)	(bp)->av_back = (struct buf *)(s)
49 
50 #define	SCBP(pkt)		((struct scsi_status *)(pkt)->pkt_scbp)
51 #define	SCBP_C(pkt)		((*(pkt)->pkt_scbp) & STATUS_MASK)
52 #define	Scsidevp		struct scsi_device *
53 #define	Scsipktp		struct scsi_pkt *
54 #define	Uscmd			struct uscsi_cmd
55 
56 #define	SES_SCSI_DEVP		(un->ses_scsi_devp)
57 #define	SES_DEVP(softc)		((softc)->ses_devp)
58 #define	SES_DEVINFO(softc)	(SES_DEVP(softc)->sd_dev)
59 #define	SES_RQSENSE(softc)	(SES_DEVP(softc)->sd_sense)
60 #define	SES_ROUTE(softc)	(&SES_DEVP(softc)->sd_address)
61 #define	SES_MUTEX		(&ssc->ses_devp->sd_mutex)
62 
63 #define	ISOPEN(softc)		((softc)->ses_lyropen || (softc)->ses_oflag)
64 #define	UNUSED_PARAMETER(x)	x = x
65 
66 
67 /*
68  * SAF-TE specific defines- Mandatory ones only...
69  */
70 
71 /*
72  * READ BUFFER ('get' commands) IDs- placed in offset 2 of cdb
73  */
74 #define	SAFTE_RD_RDCFG	0x00	/* read enclosure configuration */
75 #define	SAFTE_RD_RDESTS	0x01	/* read enclosure status */
76 #define	SAFTE_RD_RDDSTS	0x04	/* read drive slot status */
77 
78 /*
79  * WRITE BUFFER ('set' commands) IDs- placed in offset 0 of databuf
80  */
81 #define	SAFTE_WT_DSTAT	0x10	/* write device slot status */
82 #define	SAFTE_WT_SLTOP	0x12	/* perform slot operation */
83 #define	SAFTE_WT_FANSPD	0x13	/* set fan speed */
84 #define	SAFTE_WT_ACTPWS	0x14	/* turn on/off power supply */
85 #define	SAFTE_WT_GLOBAL	0x15	/* send global command */
86 
87 
88 /*
89  * Includes
90  */
91 #include <sys/scsi/targets/sesio.h>
92 
93 
94 /*
95  * Private info (Device Info. Private)
96  *
97  * Pointed to by the un_private pointer
98  * of one of the SCSI_DEVICE structures.
99  */
100 typedef struct ses_softc ses_softc_t;
101 
102 typedef struct {
103 	int (*softc_init)(ses_softc_t *, int);
104 	int (*init_enc)(ses_softc_t *);
105 	int (*get_encstat)(ses_softc_t *, int);
106 	int (*set_encstat)(ses_softc_t *, uchar_t, int);
107 	int (*get_objstat)(ses_softc_t *, ses_objarg *, int);
108 	int (*set_objstat)(ses_softc_t *, ses_objarg *, int);
109 } encvec;
110 
111 typedef enum { SES_TYPE, SAFT_TYPE, SEN_TYPE } enctyp;
112 
113 typedef struct {
114 	uchar_t		enctype;	/* enclosure type */
115 	uchar_t		subenclosure;	/* subenclosure id */
116 	ushort_t	svalid	: 1,	/* enclosure information valid */
117 			priv	: 15;	/* private data, per object */
118 	uchar_t		encstat[4];	/* state && stats */
119 } encobj;
120 
121 #ifndef	__lint				/* no warlock for X86 */
122 #ifdef	_KERNEL
123 _NOTE(MUTEX_PROTECTS_DATA(scsi_device::sd_mutex, encobj))
124 _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::priv))
125 _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::svalid))
126 _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::enctype))
127 _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::encstat))
128 _NOTE(DATA_READABLE_WITHOUT_LOCK(encobj::subenclosure))
129 #endif	/* _KERNEL */
130 #endif	/* __lint */
131 
132 
133 /*
134  * Overall Status is bits 0..3- status validity reserved at bit 7
135  */
136 #define	ENCI_SVALID	0x80
137 
138 struct ses_softc {
139 	enctyp		ses_type;	/* type of enclosure */
140 	encvec		ses_vec;	/* vector to handlers */
141 	uint_t		ses_nobjects;	/* number of objects */
142 	void *		ses_private;	/* private data */
143 	encobj *	ses_objmap;	/* objects */
144 	uchar_t		ses_encstat;	/* overall status */
145 	Scsidevp  	ses_devp;	/* backpointer to owning SCSI device */
146 	struct buf 	*ses_rqbp;	/* request sense buf pointer */
147 	Scsipktp	ses_rqpkt;	/* SCSI Request Sense Packet */
148 	struct buf 	*ses_sbufp;	/* for use in internal io */
149 	timeout_id_t	ses_restart_id; /* restart timeout id */
150 	kcondvar_t	ses_sbufcv;	/* cv on sbuf */
151 	uchar_t		ses_sbufbsy;	/* sbuf busy flag */
152 	uchar_t		ses_oflag;	/* nonzero if opened (nonlayered) */
153 	uchar_t		ses_present;	/* device present */
154 	uchar_t		ses_suspended;	/* nonzero if suspended */
155 	uchar_t		ses_arq;	/* auto request sense enabled */
156 	uint_t 		ses_lyropen;	/* layered open count */
157 	int 		ses_retries;	/* retry count */
158 	/*
159 	 * Associated storage for the special buf.
160 	 * Since we're single threaded on sbuf anyway,
161 	 * we might as well save ourselves a pile of
162 	 * grief and allocate local uscsicmd and
163 	 * ancillary storage here.
164 	 */
165 	Uscmd		ses_uscsicmd;
166 	uchar_t		ses_srqcdb[CDB_SIZE];
167 	uchar_t		ses_srqsbuf[SENSE_LENGTH];
168 };
169 
170 #ifndef	__lint				/* no warlock for X86 */
171 #ifdef	_KERNEL
172 _NOTE(MUTEX_PROTECTS_DATA(scsi_device::sd_mutex, ses_softc))
173 _NOTE(MUTEX_PROTECTS_DATA(scsi_device::sd_mutex, ses_softc::ses_lyropen))
174 
175 _NOTE(SCHEME_PROTECTS_DATA("not shared", scsi_arq_status))
176 _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_restart_id))
177 _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_retries))
178 _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_present))
179 _NOTE(SCHEME_PROTECTS_DATA("not shared", ses_softc::ses_suspended))
180 _NOTE(SCHEME_PROTECTS_DATA("stable data",
181 	ses_softc::ses_type
182 	ses_softc::ses_vec
183 	ses_softc::ses_nobjects
184 	ses_softc::ses_devp
185 	ses_softc::ses_arq))
186 
187 _NOTE(SCHEME_PROTECTS_DATA("sbufp cv",
188 	ses_softc::ses_sbufp
189 	ses_softc::ses_rqpkt
190 	ses_softc::ses_rqbp
191 	ses_softc::ses_sbufbsy
192 	ses_softc::ses_uscsicmd
193 	ses_softc::ses_srqcdb
194 	ses_softc::ses_srqsbuf
195 	ses_softc::ses_uscsicmd))
196 
197 _NOTE(SCHEME_PROTECTS_DATA("unique per pkt", scsi_pkt buf uio scsi_cdb))
198 _NOTE(SCHEME_PROTECTS_DATA("unique per pkt", scsi_extended_sense scsi_status))
199 _NOTE(SCHEME_PROTECTS_DATA("unique per pkt", uscsi_cmd))
200 _NOTE(SCHEME_PROTECTS_DATA("stable data", scsi_device))
201 
202 _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_encstat))
203 _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_objmap))
204 _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_private))
205 _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_lyropen))
206 _NOTE(DATA_READABLE_WITHOUT_LOCK(ses_softc::ses_oflag))
207 
208 _NOTE(SCHEME_PROTECTS_DATA("absurdities", ses_objarg))
209 #endif	/* _KERNEL */
210 #endif	/* __lint */
211 
212 
213 /*
214  * Compile options to turn on debugging code
215  */
216 #ifdef	DEBUG
217 #define	SES_DEBUG
218 #endif	/* DEBUG */
219 
220 #if defined(_KERNEL) || defined(_KMEMUSER)
221 
222 #define	SES_CE_DEBUG		((1  << 8) | CE_CONT)
223 #define	SES_CE_DEBUG1		((2  << 8) | CE_CONT)
224 #define	SES_CE_DEBUG2		((3  << 8) | CE_CONT)
225 #define	SES_CE_DEBUG3		((4  << 8) | CE_CONT)
226 #define	SES_CE_DEBUG4		((5  << 8) | CE_CONT)
227 #define	SES_CE_DEBUG5		((6  << 8) | CE_CONT)
228 #define	SES_CE_DEBUG6		((7  << 8) | CE_CONT)
229 #define	SES_CE_DEBUG7		((8  << 8) | CE_CONT)
230 #define	SES_CE_DEBUG8		((9  << 8) | CE_CONT)
231 #define	SES_CE_DEBUG9		((10 << 8) | CE_CONT)
232 
233 #ifndef SES_DEBUG
234 #define	ses_debug		0
235 #endif	/* SES_DEBUG */
236 
237 #define	SES_LOG			if (ses_debug) ses_log
238 #define	SES_DEBUG_ENTER		if (ses_debug) debug_enter
239 
240 
241 /*
242  * Various I/O timeouts.
243  *
244  * These are hard-coded and not adjustable. The restart macro
245  * time input is in milliseconds with 1 msec. the minimum setting.
246  *
247  */
248 #define	SES_IO_TIME		  60 /* standard I/O time (sec.) */
249 #define	SES_RESTART_TIME	 100 /* I/O restart time (ms.) */
250 #define	SES_BUSY_TIME		5000 /* I/O busy restart time (ms.) */
251 
252 #define	SES_ENABLE_RESTART(ms_time, pkt) { \
253 	ssc->ses_restart_id = timeout(ses_restart, (void *) pkt, \
254 	    (ms_time)? (ms_time * drv_usectohz(1000)): drv_usectohz(1000)); \
255 }
256 
257 
258 /*
259  * Number of times we'll retry a normal operation.
260  *
261  * Note, retries have differnt weights to max retries.
262  * Unit Attention and request sense have the most retries.
263  * Command retries have the least.
264  *
265  * For no auto-request sense operation, the SES_RETRY_MULTIPLIER
266  * must be greater than the command RETRY_COUNT.  Then the request
267  * sense commands won't impact the command retries.
268  */
269 #define	SES_RETRY_COUNT		4
270 #define	SES_RETRY_MULTIPLIER	8
271 
272 #define	SES_CMD_RETRY		SES_RETRY_MULTIPLIER
273 #define	SES_NO_RETRY		0
274 #define	SES_SENSE_RETRY		1
275 #define	SES_BUSY_RETRY		2
276 
277 /* Retry weight is 1 */
278 #define	SES_CMD_RETRY1(retry) \
279 	retry += (retry > 0)? (SES_RETRY_MULTIPLIER -1) : 0;
280 
281 /* Retry weight is 2 */
282 #define	SES_CMD_RETRY2(retry) \
283 	retry += (retry > 0)? (SES_RETRY_MULTIPLIER -2) : 0;
284 
285 /* Retry weight is 4 */
286 #define	SES_CMD_RETRY4(retry) \
287 	retry += (retry > 0)? (SES_RETRY_MULTIPLIER -4) : 0;
288 
289 
290 /*
291  * ses_present definitions
292  */
293 #define	SES_CLOSED		0
294 #define	SES_OPENING		1
295 #define	SES_OPEN		2
296 
297 
298 /*
299  * ses_callback action codes
300  */
301 #define	COMMAND_DONE		0
302 #define	COMMAND_DONE_ERROR	1
303 #define	QUE_COMMAND_NOW		3
304 #define	QUE_COMMAND		4
305 #define	QUE_SENSE		5
306 
307 
308 /*
309  * PF bit for RECEIVE DIAG command;
310  * needed for RSM first release hw.
311  */
312 #define	SCSI_ESI_PF	0x10
313 #define	SEN_ID		"UNISYS           SUN_SEN"
314 #define	SEN_ID_LEN	24
315 
316 #define	SET_BP_ERROR(bp, err)	bioerror(bp, err);
317 
318 /*
319  * Common Driver Functions
320  */
321 #if	defined(_KERNEL)
322 extern void ses_log(ses_softc_t *, int, const char *, ...);
323 extern int ses_runcmd(ses_softc_t *, Uscmd *);
324 extern int ses_uscsi_cmd(ses_softc_t *, Uscmd *, int);
325 extern int ses_io_time;
326 
327 #ifdef	DEBUG
328 extern int ses_debug;
329 #endif /* DEBUG */
330 
331 #endif	/* defined(_KERNEL) */
332 
333 
334 #endif	/* defined(_KERNEL) || defined(_KMEMUSER) */
335 
336 #ifdef	__cplusplus
337 }
338 #endif
339 
340 #endif	/* _SYS_SCSI_TARGETS_SES_H */
341