1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 /* 27 * Defines for user SCSI commands * 28 */ 29 30 #ifndef _SYS_SCSI_IMPL_USCSI_H 31 #define _SYS_SCSI_IMPL_USCSI_H 32 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 /* 39 * definition for user-scsi command structure 40 */ 41 struct uscsi_cmd { 42 int uscsi_flags; /* read, write, etc. see below */ 43 short uscsi_status; /* resulting status */ 44 short uscsi_timeout; /* Command Timeout */ 45 caddr_t uscsi_cdb; /* cdb to send to target */ 46 caddr_t uscsi_bufaddr; /* i/o source/destination */ 47 size_t uscsi_buflen; /* size of i/o to take place */ 48 size_t uscsi_resid; /* resid from i/o operation */ 49 uchar_t uscsi_cdblen; /* # of valid cdb bytes */ 50 uchar_t uscsi_rqlen; /* size of uscsi_rqbuf */ 51 uchar_t uscsi_rqstatus; /* status of request sense cmd */ 52 uchar_t uscsi_rqresid; /* resid of request sense cmd */ 53 caddr_t uscsi_rqbuf; /* request sense buffer */ 54 ulong_t uscsi_path_instance; /* private: hardware path */ 55 }; 56 57 #if defined(_SYSCALL32) 58 struct uscsi_cmd32 { 59 int uscsi_flags; /* read, write, etc. see below */ 60 short uscsi_status; /* resulting status */ 61 short uscsi_timeout; /* Command Timeout */ 62 caddr32_t uscsi_cdb; /* cdb to send to target */ 63 caddr32_t uscsi_bufaddr; /* i/o source/destination */ 64 size32_t uscsi_buflen; /* size of i/o to take place */ 65 size32_t uscsi_resid; /* resid from i/o operation */ 66 uchar_t uscsi_cdblen; /* # of valid cdb bytes */ 67 uchar_t uscsi_rqlen; /* size of uscsi_rqbuf */ 68 uchar_t uscsi_rqstatus; /* status of request sense cmd */ 69 uchar_t uscsi_rqresid; /* resid of request sense cmd */ 70 caddr32_t uscsi_rqbuf; /* request sense buffer */ 71 uint32_t uscsi_path_instance; /* private: hardware path */ 72 }; 73 74 #define uscsi_cmd32touscsi_cmd(u32, ucmd) \ 75 ucmd->uscsi_flags = u32->uscsi_flags; \ 76 ucmd->uscsi_status = u32->uscsi_status; \ 77 ucmd->uscsi_timeout = u32->uscsi_timeout; \ 78 ucmd->uscsi_cdb = (caddr_t)(uintptr_t)u32->uscsi_cdb; \ 79 ucmd->uscsi_bufaddr = (caddr_t)(uintptr_t)u32->uscsi_bufaddr; \ 80 ucmd->uscsi_buflen = (size_t)u32->uscsi_buflen; \ 81 ucmd->uscsi_resid = (size_t)u32->uscsi_resid; \ 82 ucmd->uscsi_cdblen = u32->uscsi_cdblen; \ 83 ucmd->uscsi_rqlen = u32->uscsi_rqlen; \ 84 ucmd->uscsi_rqstatus = u32->uscsi_rqstatus; \ 85 ucmd->uscsi_rqresid = u32->uscsi_rqresid; \ 86 ucmd->uscsi_rqbuf = (caddr_t)(uintptr_t)u32->uscsi_rqbuf; \ 87 ucmd->uscsi_path_instance = (ulong_t)u32->uscsi_path_instance; 88 89 90 #define uscsi_cmdtouscsi_cmd32(ucmd, u32) \ 91 u32->uscsi_flags = ucmd->uscsi_flags; \ 92 u32->uscsi_status = ucmd->uscsi_status; \ 93 u32->uscsi_timeout = ucmd->uscsi_timeout; \ 94 u32->uscsi_cdb = (caddr32_t)(uintptr_t)ucmd->uscsi_cdb; \ 95 u32->uscsi_bufaddr = (caddr32_t)(uintptr_t)ucmd->uscsi_bufaddr; \ 96 u32->uscsi_buflen = (size32_t)ucmd->uscsi_buflen; \ 97 u32->uscsi_resid = (size32_t)ucmd->uscsi_resid; \ 98 u32->uscsi_cdblen = ucmd->uscsi_cdblen; \ 99 u32->uscsi_rqlen = ucmd->uscsi_rqlen; \ 100 u32->uscsi_rqstatus = ucmd->uscsi_rqstatus; \ 101 u32->uscsi_rqresid = ucmd->uscsi_rqresid; \ 102 u32->uscsi_rqbuf = (caddr32_t)(uintptr_t)ucmd->uscsi_rqbuf; \ 103 u32->uscsi_path_instance = (uint32_t)ucmd->uscsi_path_instance; 104 105 #endif /* _SYSCALL32 */ 106 107 108 /* 109 * flags for uscsi_flags field 110 */ 111 /* 112 * generic flags 113 */ 114 #define USCSI_SILENT 0x00000001 /* no error messages */ 115 #define USCSI_DIAGNOSE 0x00000002 /* fail if any error occurs */ 116 #define USCSI_ISOLATE 0x00000004 /* isolate from normal commands */ 117 #define USCSI_READ 0x00000008 /* get data from device */ 118 #define USCSI_WRITE 0x00000000 /* send data to device */ 119 120 #define USCSI_RESET 0x00004000 /* Reset target */ 121 #define USCSI_RESET_TARGET \ 122 USCSI_RESET /* Reset target */ 123 #define USCSI_RESET_ALL 0x00008000 /* Reset all targets */ 124 #define USCSI_RQENABLE 0x00010000 /* Enable Request Sense extensions */ 125 #define USCSI_RENEGOT 0x00020000 /* renegotiate wide/sync on next I/O */ 126 #define USCSI_RESET_LUN 0x00040000 /* Reset logical unit */ 127 #define USCSI_PATH_INSTANCE \ 128 0x00080000 /* use path instance for transport */ 129 130 /* 131 * suitable for parallel SCSI bus only 132 */ 133 #define USCSI_ASYNC 0x00001000 /* Set bus to asynchronous mode */ 134 #define USCSI_SYNC 0x00002000 /* Set bus to sync mode if possible */ 135 136 /* 137 * the following flags should not be used at user level but may 138 * be used by a scsi target driver for internal commands 139 */ 140 /* 141 * generic flags 142 */ 143 #define USCSI_NOINTR 0x00000040 /* No interrupts, NEVER use this flag */ 144 #define USCSI_NOTAG 0x00000100 /* Disable tagged queueing */ 145 #define USCSI_OTAG 0x00000200 /* ORDERED QUEUE tagged cmd */ 146 #define USCSI_HTAG 0x00000400 /* HEAD OF QUEUE tagged cmd */ 147 #define USCSI_HEAD 0x00000800 /* Head of HA queue */ 148 149 /* 150 * suitable for parallel SCSI bus only 151 */ 152 #define USCSI_NOPARITY 0x00000010 /* run command without parity */ 153 #define USCSI_NODISCON 0x00000020 /* run command without disconnects */ 154 155 156 #define USCSI_RESERVED 0xfff00000 /* Reserved Bits, must be zero */ 157 158 struct uscsi_rqs { 159 int rqs_flags; /* see below */ 160 ushort_t rqs_buflen; /* maximum number or bytes to return */ 161 ushort_t rqs_resid; /* untransferred length of RQS data */ 162 caddr_t rqs_bufaddr; /* request sense buffer */ 163 }; 164 165 #if defined(_SYSCALL32) 166 struct uscsi_rqs32 { 167 int rqs_flags; /* see below */ 168 ushort_t rqs_buflen; /* maximum number or bytes to return */ 169 ushort_t rqs_resid; /* untransferred length of RQS data */ 170 caddr32_t rqs_bufaddr; /* request sense buffer */ 171 }; 172 #endif /* _SYSCALL32 */ 173 174 175 /* 176 * uscsi_rqs flags 177 */ 178 179 #define RQS_OVR 0x01 /* RQS data has been overwritten */ 180 #define RQS_VALID 0x02 /* RQS data is valid */ 181 182 /* 183 * User SCSI io control command 184 */ 185 #define USCSIIOC (0x04 << 8) 186 #define USCSICMD (USCSIIOC|201) /* user scsi command */ 187 188 #ifdef _KERNEL 189 190 #include <sys/scsi/scsi_types.h> 191 192 struct uscsi_cmd *scsi_uscsi_alloc(); 193 int scsi_uscsi_copyin(intptr_t, int, 194 struct scsi_address *, struct uscsi_cmd **); 195 int scsi_uscsi_alloc_and_copyin(intptr_t, int, 196 struct scsi_address *, struct uscsi_cmd **); 197 198 int scsi_uscsi_pktinit(struct uscsi_cmd *, struct scsi_pkt *); 199 int scsi_uscsi_handle_cmd(dev_t, enum uio_seg, 200 struct uscsi_cmd *, int (*)(struct buf *), 201 struct buf *, void *); 202 int scsi_uscsi_pktfini(struct scsi_pkt *, struct uscsi_cmd *); 203 204 int scsi_uscsi_copyout(intptr_t, struct uscsi_cmd *); 205 void scsi_uscsi_free(struct uscsi_cmd *); 206 int scsi_uscsi_copyout_and_free(intptr_t, struct uscsi_cmd *); 207 208 #endif /* _KERNEL */ 209 210 #ifdef __cplusplus 211 } 212 #endif 213 214 #endif /* _SYS_SCSI_IMPL_USCSI_H */ 215