1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _SYS_KBTRANS_H 28 #define _SYS_KBTRANS_H 29 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 /* 33 * Interface between hardware keyboard driver and generic keyboard 34 * translation module. 35 */ 36 37 #ifdef __cplusplus 38 extern "C" { 39 #endif 40 41 #include <sys/consdev.h> 42 43 /* 44 * By default, set conskbd's layout to US 45 */ 46 #define KBTRANS_USBKB_LAYOUT_US 0x21 47 #define KBTRANS_USBKB_DEFAULT_LAYOUT KBTRANS_USBKB_LAYOUT_US 48 49 /* 50 * Maximum of keys in a keyboard 51 */ 52 #define KBTRANS_KEYNUMS_MAX 255 53 54 /* 55 * Do not expose the internals of these structures to kbtrans clients 56 */ 57 struct kbtrans_hardware; 58 59 struct kbtrans; 60 61 enum kbtrans_message_response { 62 KBTRANS_MESSAGE_HANDLED = 0, 63 KBTRANS_MESSAGE_NOT_HANDLED = 1 64 }; 65 66 typedef boolean_t (*polled_keycode_func)(struct kbtrans_hardware *, 67 kbtrans_key_t *, enum keystate *); 68 struct hw_polledio { 69 void *polled_argument; 70 polled_keycode_func *polled_keycode; 71 }; 72 73 74 75 /* 76 * Callbacks registered by the hardware specific driver/module 77 */ 78 struct kbtrans_callbacks { 79 80 /* Routine to set the LED's in non-polled mode */ 81 void (*kbtrans_streams_setled)(struct kbtrans_hardware *, int); 82 83 /* Routine to set the LED's in polled mode */ 84 void (*kbtrans_polled_setled)(struct kbtrans_hardware *, int); 85 86 /* Routine to indicate that a scande is available in polled mode */ 87 boolean_t (*kbtrans_polled_keycheck)(struct kbtrans_hardware *, 88 kbtrans_key_t *, enum keystate *); 89 }; 90 91 /* 92 * kbtrans_streams_init(): 93 * 94 * Initializes the generic keyboard translation module. Must be 95 * called from the hardware module's open(9e) routine. 96 * 97 * Arguments: 98 * - queue_t *q 99 * The read queue. 100 * 101 * - int sflag 102 * sflag from the streams open routine 103 * 104 * - cred_t *crp 105 * credentials from open 106 * 107 * - struct kbtrans_hardware *hw 108 * hardware-specific data, passed to hardware callbacks 109 * 110 * - struct kbtrans_callbacks *hw_callbacks 111 * hardware support callbacks (see below) 112 * 113 * - struct kbtrans **kbtrans 114 * returned state structure pointer 115 * 116 * - int initial_leds 117 * - int initial_led_mask 118 * Provides state information (if available) about the current 119 * keyboard state, in the form of LED state. initial_leds shows 120 * which LEDs are lit; initial_led_mask shows which bits in 121 * initial_leds are valid. This mechanism exists primarily to 122 * retain the existing state of NumLock across the transition 123 * from firmware to the OS. 124 */ 125 extern int kbtrans_streams_init(queue_t *, int, cred_t *, 126 struct kbtrans_hardware *, struct kbtrans_callbacks *, 127 struct kbtrans **, int, int); 128 129 /* 130 * kbtrans_streams_fini(): 131 * 132 * Shuts down the generic translation module. Must be called from 133 * the hardware module's close(9e) routine. 134 */ 135 extern int kbtrans_streams_fini(struct kbtrans *); 136 137 /* 138 * kbtrans_streams_message(): 139 * 140 * The hardware module should pass all streams messages received from 141 * above to this routine. The generic translation module will process 142 * most of them, returning KBTRANS_MESSAGE_HANDLED for the ones that 143 * it has handled and KBTRANS_MESSAGE_NOT_HANDLED for the ones that 144 * it did not handle. For KBTRANS_MESSAGE_HANDLED, the hardware module 145 * should take no further action on the message. For 146 * KBTRANS_MESSAGE_NOT_HANDLED, the hardware module is responsible for 147 * any action, including returning an appropriate error. 148 * 149 * Must be called from the hardware module's write put(9e) or srv(9e) 150 * routine. 151 */ 152 extern enum kbtrans_message_response kbtrans_streams_message(struct kbtrans *, 153 mblk_t *); 154 155 /* 156 * kbtrans_streams_key(): 157 * 158 * When a key is pressed or released, the hardware module should 159 * call kbtrans, passing the key number and its new 160 * state. kbtrans is responsible for autorepeat handling; 161 * the hardware module should report only actual press/release 162 * events, suppressing any hardware-generated autorepeat. 163 */ 164 extern void kbtrans_streams_key(struct kbtrans *, kbtrans_key_t key, 165 enum keystate state); 166 167 /* 168 * kbtrans_streams_set_keyboard(): 169 * 170 * At any time after calling kbtrans_streams_init, the hardware 171 * module should make this call to report the type of keyboard 172 * attached. "type" is the keyboard type, typically KB_SUN4, 173 * KB_PC, or KB_USB. 174 */ 175 extern void kbtrans_streams_set_keyboard(struct kbtrans *, int, 176 struct keyboard *); 177 178 /* 179 * kbtrans_streams_has_reset(): 180 * 181 * At any time between kbtrans_streams_init and kbtrans_streams_fini, 182 * the hardware module can call this routine to report that the 183 * keyboard has been reset, e.g. by being unplugged and reattached. 184 * 185 * This function is for use by keyboard devices that do not formally 186 * support hotplug. If the keyboard hardware spontaneously resets 187 * itself in a case other than hotplug, this routine is called to 188 * report the rest. 189 * 190 */ 191 extern void kbtrans_streams_has_reset(struct kbtrans *); 192 193 /* 194 * kbtrans_ischar(): 195 * kbtrans_getchar(): 196 * 197 * These routines are used for polled input, e.g. for kmdb or PROM 198 * input. Note that, with suitable casting, these routines are usable 199 * as CONSOPENPOLLEDIO routines. 200 * 201 * May only be called from single-threaded code, e.g. kmdb. 202 */ 203 extern boolean_t kbtrans_ischar(struct kbtrans *); 204 extern int kbtrans_getchar(struct kbtrans *); 205 206 /* 207 * kbtrans_streams_enable(): 208 * Routine to be called from the hardware specific module when 209 * the stream is ready to take messages. 210 */ 211 extern void kbtrans_streams_enable(struct kbtrans *); 212 213 214 /* 215 * kbtrans_streams_releaseall(): 216 * Release all the keys that are held down. 217 */ 218 extern void kbtrans_streams_releaseall(struct kbtrans *); 219 220 /* 221 * kbtrans_streams_set_queue(): 222 * Change the queue above the device, to support multiplexors. 223 */ 224 extern void kbtrans_streams_set_queue(struct kbtrans *, queue_t *); 225 226 /* 227 * kbtrans_streams_get_queue(): 228 * Retrieve the current queue above the device. 229 */ 230 extern queue_t *kbtrans_streams_get_queue(struct kbtrans *); 231 232 /* 233 * kbtrans_streams_untimeout(): 234 * Clear timeout 235 */ 236 extern void kbtrans_streams_untimeout(struct kbtrans *); 237 238 #ifdef __cplusplus 239 } 240 #endif 241 242 #endif /* _SYS_KBTRANS_H */ 243