1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 /* Copyright (c) 1983, 1984, 1985, 1986, 1987, 1988, 1989 AT&T */ 26 /* All Rights Reserved */ 27 /* 28 * Portions of this source code were derived from Berkeley 29 * 4.3 BSD under license from the Regents of the University of 30 * California. 31 */ 32 33 /* 34 * svc.h, Server-side remote procedure call interface. 35 */ 36 37 #ifndef _RPC_SVC_H 38 #define _RPC_SVC_H 39 40 #pragma ident "%Z%%M% %I% %E% SMI" 41 42 #include <rpc/rpc_com.h> 43 #include <rpc/rpc_msg.h> 44 #include <sys/tihdr.h> 45 #include <sys/poll.h> 46 #include <sys/tsol/label.h> 47 48 #ifdef _KERNEL 49 #include <rpc/svc_auth.h> 50 #include <sys/callb.h> 51 #endif /* _KERNEL */ 52 53 /* 54 * This interface must manage two items concerning remote procedure calling: 55 * 56 * 1) An arbitrary number of transport connections upon which rpc requests 57 * are received. They are created and registered by routines in svc_generic.c, 58 * svc_vc.c and svc_dg.c; they in turn call xprt_register and 59 * xprt_unregister. 60 * 61 * 2) An arbitrary number of locally registered services. Services are 62 * described by the following four data: program number, version number, 63 * "service dispatch" function, a transport handle, and a boolean that 64 * indicates whether or not the exported program should be registered with a 65 * local binder service; if true the program's number and version and the 66 * address from the transport handle are registered with the binder. 67 * These data are registered with rpcbind via svc_reg(). 68 * 69 * A service's dispatch function is called whenever an rpc request comes in 70 * on a transport. The request's program and version numbers must match 71 * those of the registered service. The dispatch function is passed two 72 * parameters, struct svc_req * and SVCXPRT *, defined below. 73 */ 74 75 #ifdef __cplusplus 76 extern "C" { 77 #endif 78 79 /* 80 * Server-side transport handles. 81 * The actual type definitions are below. 82 */ 83 #ifdef _KERNEL 84 typedef struct __svcmasterxprt SVCMASTERXPRT; /* Master transport handle */ 85 typedef struct __svcxprt SVCXPRT; /* Per-thread clone handle */ 86 typedef struct __svcpool SVCPOOL; /* Kernel thread pool */ 87 #else /* _KERNEL */ 88 typedef struct __svcxprt SVCXPRT; /* Server transport handle */ 89 #endif /* _KERNEL */ 90 91 /* 92 * Prototype of error handler callback 93 */ 94 #ifndef _KERNEL 95 typedef void (*svc_errorhandler_t)(const SVCXPRT* svc, const bool_t isAConn); 96 #endif 97 98 /* 99 * Service request. 100 * 101 * PSARC 2003/523 Contract Private Interface 102 * svc_req 103 * Changes must be reviewed by Solaris File Sharing 104 * Changes must be communicated to contract-2003-523@sun.com 105 */ 106 struct svc_req { 107 rpcprog_t rq_prog; /* service program number */ 108 rpcvers_t rq_vers; /* service protocol version */ 109 rpcproc_t rq_proc; /* the desired procedure */ 110 struct opaque_auth rq_cred; /* raw creds from the wire */ 111 caddr_t rq_clntcred; /* read only cooked cred */ 112 SVCXPRT *rq_xprt; /* associated transport */ 113 bslabel_t *rq_label; /* TSOL label of the request */ 114 }; 115 116 #ifdef _KERNEL 117 struct dupreq { 118 uint32_t dr_xid; 119 rpcproc_t dr_proc; 120 rpcvers_t dr_vers; 121 rpcprog_t dr_prog; 122 struct netbuf dr_addr; 123 struct netbuf dr_resp; 124 void (*dr_resfree)(); 125 int dr_status; 126 struct dupreq *dr_next; 127 struct dupreq *dr_chain; 128 }; 129 130 /* 131 * States of requests for duplicate request caching. 132 */ 133 #define DUP_NEW 0x00 /* new entry */ 134 #define DUP_INPROGRESS 0x01 /* request already going */ 135 #define DUP_DONE 0x02 /* request done */ 136 #define DUP_DROP 0x03 /* request dropped */ 137 #define DUP_ERROR 0x04 /* error in dup req cache */ 138 139 /* 140 * Prototype for a service dispatch routine. 141 */ 142 typedef void (SVC_DISPATCH)(struct svc_req *, SVCXPRT *); 143 144 /* 145 * The service provider callout. 146 * Each entry identifies a dispatch routine to be called 147 * for a given RPC program number and a version fitting 148 * into the registered range. 149 */ 150 typedef struct { 151 rpcprog_t sc_prog; /* RPC Program number */ 152 rpcvers_t sc_versmin; /* Min version number */ 153 rpcvers_t sc_versmax; /* Max version number */ 154 SVC_DISPATCH *sc_dispatch; /* Dispatch routine */ 155 } SVC_CALLOUT; 156 157 /* 158 * Table of service provider `callouts' for an RPC 159 * transport handle. If sct_free is TRUE then transport 160 * destructor is supposed to deallocate this table. 161 */ 162 typedef struct { 163 size_t sct_size; /* Number of entries */ 164 bool_t sct_free; /* Deallocate if true */ 165 SVC_CALLOUT *sct_sc; /* Callout entries */ 166 } SVC_CALLOUT_TABLE; 167 168 struct svc_ops { 169 bool_t (*xp_recv)(SVCXPRT *, mblk_t *, struct rpc_msg *); 170 /* receive incoming requests */ 171 bool_t (*xp_getargs)(SVCXPRT *, xdrproc_t, caddr_t); 172 /* get arguments */ 173 bool_t (*xp_reply)(SVCXPRT *, struct rpc_msg *); 174 /* send reply */ 175 bool_t (*xp_freeargs)(SVCXPRT *, xdrproc_t, caddr_t); 176 /* free mem allocated for args */ 177 void (*xp_destroy)(SVCMASTERXPRT *); 178 /* destroy this struct */ 179 int (*xp_dup)(struct svc_req *, caddr_t, int, 180 struct dupreq **, bool_t *); 181 /* check for dup */ 182 void (*xp_dupdone)(struct dupreq *, caddr_t, void (*)(), int, int); 183 /* mark dup entry as completed */ 184 int32_t *(*xp_getres)(SVCXPRT *, int); 185 /* get pointer to response buffer */ 186 void (*xp_freeres)(SVCXPRT *); 187 /* destroy pre-serialized response */ 188 void (*xp_clone_destroy)(SVCXPRT *); 189 /* destroy a clone xprt */ 190 void (*xp_start)(SVCMASTERXPRT *); 191 /* `ready-to-receive' */ 192 }; 193 #else /* _KERNEL */ 194 /* 195 * Service control requests 196 */ 197 #define SVCGET_VERSQUIET 1 198 #define SVCSET_VERSQUIET 2 199 #define SVCGET_XID 4 200 #define SVCSET_KEEPALIVE 5 201 #define SVCSET_CONNMAXREC 6 202 #define SVCGET_CONNMAXREC 7 203 #define SVCGET_RECVERRHANDLER 8 204 #define SVCSET_RECVERRHANDLER 9 205 206 enum xprt_stat { 207 XPRT_DIED, 208 XPRT_MOREREQS, 209 XPRT_IDLE 210 }; 211 212 struct xp_ops { 213 #ifdef __STDC__ 214 bool_t (*xp_recv)(SVCXPRT *, struct rpc_msg *); 215 /* receive incoming requests */ 216 enum xprt_stat (*xp_stat)(SVCXPRT *); 217 /* get transport status */ 218 bool_t (*xp_getargs)(SVCXPRT *, xdrproc_t, caddr_t); 219 /* get arguments */ 220 bool_t (*xp_reply)(SVCXPRT *, struct rpc_msg *); 221 /* send reply */ 222 bool_t (*xp_freeargs)(SVCXPRT *, xdrproc_t, caddr_t); 223 /* free mem allocated for args */ 224 void (*xp_destroy)(SVCXPRT *); 225 /* destroy this struct */ 226 bool_t (*xp_control)(SVCXPRT *, const uint_t, void *); 227 /* catch-all control function */ 228 #else /* __STDC__ */ 229 bool_t (*xp_recv)(); /* receive incoming requests */ 230 enum xprt_stat (*xp_stat)(); /* get transport status */ 231 bool_t (*xp_getargs)(); /* get arguments */ 232 bool_t (*xp_reply)(); /* send reply */ 233 bool_t (*xp_freeargs)(); /* free mem allocated for args */ 234 void (*xp_destroy)(); /* destroy this struct */ 235 bool_t (*xp_control)(); /* catch-all control function */ 236 #endif /* __STDC__ */ 237 }; 238 #endif /* _KERNEL */ 239 240 #ifdef _KERNEL 241 /* 242 * SVCPOOL 243 * Kernel RPC server-side thread pool structure. 244 */ 245 typedef struct __svcxprt_qnode __SVCXPRT_QNODE; /* Defined in svc.c */ 246 247 struct __svcpool { 248 /* 249 * Thread pool variables. 250 * 251 * The pool's thread lock p_thread_lock protects: 252 * - p_threads, p_detached_threads, p_reserved_threads and p_closing 253 * The pool's request lock protects: 254 * - p_asleep, p_drowsy, p_reqs, p_walkers, p_req_cv. 255 * The following fields are `initialized constants': 256 * - p_id, p_stksize, p_timeout. 257 * Access to p_next and p_prev is protected by the pool 258 * list lock. 259 */ 260 SVCPOOL *p_next; /* Next pool in the list */ 261 SVCPOOL *p_prev; /* Prev pool in the list */ 262 int p_id; /* Pool id */ 263 int p_threads; /* Non-detached threads */ 264 int p_detached_threads; /* Detached threads */ 265 int p_maxthreads; /* Max threads in the pool */ 266 int p_redline; /* `Redline' for the pool */ 267 int p_reserved_threads; /* Reserved threads */ 268 kmutex_t p_thread_lock; /* Thread lock */ 269 int p_asleep; /* Asleep threads */ 270 int p_drowsy; /* Drowsy flag */ 271 kcondvar_t p_req_cv; /* svc_poll() sleep var. */ 272 clock_t p_timeout; /* svc_poll() timeout */ 273 kmutex_t p_req_lock; /* Request lock */ 274 int p_reqs; /* Pending requests */ 275 int p_walkers; /* Walking threads */ 276 int p_max_same_xprt; /* Max reqs from the xprt */ 277 int p_stksize; /* Stack size for svc_run */ 278 bool_t p_closing : 1; /* Pool is closing */ 279 280 /* 281 * Thread creator variables. 282 * The `creator signaled' flag is turned on when a signal is send 283 * to the creator thread (to create a new service thread). The 284 * creator clears when the thread is created. The protocol is not 285 * to signal the creator thread when the flag is on. However, 286 * a new thread should signal the creator if there are more 287 * requests in the queue. 288 * 289 * When the pool is closing (ie it has been already unregistered from 290 * the pool list) the last thread on the last transport should turn 291 * the p_creator_exit flag on. This tells the creator thread to 292 * free the pool structure and exit. 293 */ 294 bool_t p_creator_signaled : 1; /* Create requested flag */ 295 bool_t p_creator_exit : 1; /* If true creator exits */ 296 kcondvar_t p_creator_cv; /* Creator cond. variable */ 297 kmutex_t p_creator_lock; /* Creator lock */ 298 299 /* 300 * Doubly linked list containing `registered' master transport handles. 301 * There is no special structure for a list node. Instead the 302 * SVCMASTERXPRT structure has the xp_next and xp_prev fields. 303 * 304 * The p_lrwlock protects access to xprt->xp_next and xprt->xp_prev. 305 * A service thread should also acquire a reader lock before accessing 306 * any transports it is no longer linked to (to prevent them from 307 * being destroyed). 308 * 309 * The list lock governs also the `pool is closing' flag. 310 */ 311 size_t p_lcount; /* Current count */ 312 SVCMASTERXPRT *p_lhead; /* List head */ 313 krwlock_t p_lrwlock; /* R/W lock */ 314 315 /* 316 * Circular linked list for the `xprt-ready' queue (FIFO). 317 * Must be initialized with svc_xprt_qinit() before it is used. 318 * 319 * The writer's end is protected by the pool's request lock 320 * (pool->p_req_lock). The reader's end is protected by q_end_lock. 321 * 322 * When the queue is full the p_qoverflow flag is raised. It stays 323 * on until all the pending request are drained. 324 */ 325 size_t p_qsize; /* Number of queue nodes */ 326 int p_qoverflow : 1; /* Overflow flag */ 327 __SVCXPRT_QNODE *p_qbody; /* Queue body (array) */ 328 __SVCXPRT_QNODE *p_qtop; /* Writer's end of FIFO */ 329 __SVCXPRT_QNODE *p_qend; /* Reader's end of FIFO */ 330 kmutex_t p_qend_lock; /* Reader's end lock */ 331 332 /* 333 * Userspace thread creator variables. 334 * Thread creation is actually done in userland, via a thread 335 * that is parked in the kernel. When that thread is signaled, 336 * it returns back down to the daemon from whence it came and 337 * does the lwp create. 338 * 339 * A parallel "creator" thread runs in the kernel. That is the 340 * thread that will signal for the user thread to return to 341 * userland and do its work. 342 * 343 * Since the thread doesn't always exist (there could be a race 344 * if two threads are created in rapid succession), we set 345 * p_signal_create_thread to FALSE when we're ready to accept work. 346 * 347 * p_user_exit is set to true when the service pool is about 348 * to close. This is done so that the user creation thread 349 * can be informed and cleanup any userland state. 350 */ 351 352 bool_t p_signal_create_thread : 1; /* Create requested flag */ 353 bool_t p_user_exit : 1; /* If true creator exits */ 354 bool_t p_user_waiting : 1; /* Thread waiting for work */ 355 kcondvar_t p_user_cv; /* Creator cond. variable */ 356 kmutex_t p_user_lock; /* Creator lock */ 357 void (*p_offline)(); /* callout for unregister */ 358 void (*p_shutdown)(); /* callout for shutdown */ 359 }; 360 361 /* 362 * Server side transport handle (SVCMASTERXPRT). 363 * xprt->xp_req_lock governs the following fields in xprt: 364 * xp_req_head, xp_req_tail. 365 * xprt->xp_thread_lock governs the following fields in xprt: 366 * xp_threads, xp_detached_threads. 367 * 368 * xp_req_tail is only valid if xp_req_head is non-NULL 369 * 370 * The xp_threads count is the number of attached threads. These threads 371 * are able to handle new requests, and it is expected that they will not 372 * block for a very long time handling a given request. The 373 * xp_detached_threads count is the number of threads that have detached 374 * themselves from the transport. These threads can block indefinitely 375 * while handling a request. Once they complete the request, they exit. 376 * 377 * A kernel service provider may register a callback function "closeproc" 378 * for a transport. When the transport is closing the last exiting attached 379 * thread - xp_threads goes to zero - it calls the callback function, passing 380 * it a reference to the transport. This call is made with xp_thread_lock 381 * held, so any cleanup bookkeeping it does should be done quickly. 382 * 383 * When the transport is closing the last exiting thread is supposed 384 * to destroy/free the data structure. 385 */ 386 typedef struct __svcxprt_common { 387 struct file *xpc_fp; 388 struct svc_ops *xpc_ops; 389 queue_t *xpc_wq; /* queue to write onto */ 390 cred_t *xpc_cred; /* cached cred for server to use */ 391 int32_t xpc_type; /* transport type */ 392 int xpc_msg_size; /* TSDU or TIDU size */ 393 struct netbuf xpc_rtaddr; /* remote transport address */ 394 struct netbuf xpc_lcladdr; /* local transport address */ 395 SVC_CALLOUT_TABLE *xpc_sct; 396 } __SVCXPRT_COMMON; 397 398 #define xp_fp xp_xpc.xpc_fp 399 #define xp_ops xp_xpc.xpc_ops 400 #define xp_wq xp_xpc.xpc_wq 401 #define xp_cred xp_xpc.xpc_cred 402 #define xp_type xp_xpc.xpc_type 403 #define xp_msg_size xp_xpc.xpc_msg_size 404 #define xp_rtaddr xp_xpc.xpc_rtaddr 405 #define xp_lcladdr xp_xpc.xpc_lcladdr 406 #define xp_sct xp_xpc.xpc_sct 407 408 struct __svcmasterxprt { 409 SVCMASTERXPRT *xp_next; /* Next transport in the list */ 410 SVCMASTERXPRT *xp_prev; /* Prev transport in the list */ 411 __SVCXPRT_COMMON xp_xpc; /* Fields common with the clone */ 412 SVCPOOL *xp_pool; /* Pointer to the pool */ 413 mblk_t *xp_req_head; /* Request queue head */ 414 mblk_t *xp_req_tail; /* Request queue tail */ 415 kmutex_t xp_req_lock; /* Request lock */ 416 int xp_threads; /* Current num. of attached threads */ 417 int xp_detached_threads; /* num. of detached threads */ 418 kmutex_t xp_thread_lock; /* Thread count lock */ 419 void (*xp_closeproc)(const SVCMASTERXPRT *); 420 /* optional; see comments above */ 421 char *xp_netid; /* network token */ 422 struct netbuf xp_addrmask; /* address mask */ 423 424 caddr_t xp_p2; /* private: for use by svc ops */ 425 }; 426 427 /* 428 * Service thread `clone' transport handle (SVCXPRT) 429 * 430 * PSARC 2003/523 Contract Private Interface 431 * SVCXPRT 432 * Changes must be reviewed by Solaris File Sharing 433 * Changes must be communicated to contract-2003-523@sun.com 434 * 435 * The xp_p2buf buffer is used as the storage for a transport type 436 * specific structure. It is private for the svc ops for a given 437 * transport type. 438 */ 439 440 #define SVC_P2LEN 64 441 442 struct __svcxprt { 443 __SVCXPRT_COMMON xp_xpc; 444 SVCMASTERXPRT *xp_master; /* back ptr to master */ 445 446 /* The following fileds are on a per-thread basis */ 447 callb_cpr_t *xp_cprp; /* unused padding for Contract */ 448 bool_t xp_reserved : 1; /* is thread reserved? */ 449 bool_t xp_detached : 1; /* is thread detached? */ 450 int xp_same_xprt; /* Reqs from the same xprt */ 451 452 /* The following fields are used on a per-request basis */ 453 struct opaque_auth xp_verf; /* raw response verifier */ 454 SVCAUTH xp_auth; /* auth flavor of current req */ 455 void *xp_cookie; /* a cookie */ 456 uint32_t xp_xid; /* id */ 457 XDR xp_xdrin; /* input xdr stream */ 458 XDR xp_xdrout; /* output xdr stream */ 459 460 /* Private for svc ops */ 461 char xp_p2buf[SVC_P2LEN]; /* udp_data or cots_data_t */ 462 /* or clone_rdma_data_t */ 463 }; 464 #else /* _KERNEL */ 465 struct __svcxprt { 466 int xp_fd; 467 #define xp_sock xp_fd 468 ushort_t xp_port; 469 /* 470 * associated port number. 471 * Obsolete, but still used to 472 * specify whether rendezvouser 473 * or normal connection 474 */ 475 struct xp_ops *xp_ops; 476 int xp_addrlen; /* length of remote addr. Obsoleted */ 477 char *xp_tp; /* transport provider device name */ 478 char *xp_netid; /* network token */ 479 struct netbuf xp_ltaddr; /* local transport address */ 480 struct netbuf xp_rtaddr; /* remote transport address */ 481 char xp_raddr[16]; /* remote address. Now obsoleted */ 482 struct opaque_auth xp_verf; /* raw response verifier */ 483 caddr_t xp_p1; /* private: for use by svc ops */ 484 caddr_t xp_p2; /* private: for use by svc ops */ 485 caddr_t xp_p3; /* private: for use by svc lib */ 486 int xp_type; /* transport type */ 487 /* 488 * callback on client death 489 * First parameter is the current structure, 490 * Second parameter : 491 * - FALSE for the service listener 492 * - TRUE for a real connected socket 493 */ 494 svc_errorhandler_t xp_closeclnt; 495 }; 496 #endif /* _KERNEL */ 497 498 /* 499 * Approved way of getting address of caller, 500 * address mask, and netid of transport. 501 */ 502 #define svc_getrpccaller(x) (&(x)->xp_rtaddr) 503 #ifdef _KERNEL 504 #define svc_getcaller(x) (&(x)->xp_rtaddr.buf) 505 #define svc_getaddrmask(x) (&(x)->xp_master->xp_addrmask) 506 #define svc_getnetid(x) ((x)->xp_master->xp_netid) 507 #endif /* _KERNEL */ 508 509 /* 510 * Operations defined on an SVCXPRT handle 511 */ 512 513 #ifdef _KERNEL 514 #define SVC_RECV(clone_xprt, mp, msg) \ 515 (*(clone_xprt)->xp_ops->xp_recv)((clone_xprt), (mp), (msg)) 516 517 /* 518 * PSARC 2003/523 Contract Private Interface 519 * SVC_GETARGS 520 * Changes must be reviewed by Solaris File Sharing 521 * Changes must be communicated to contract-2003-523@sun.com 522 */ 523 #define SVC_GETARGS(clone_xprt, xargs, argsp) \ 524 (*(clone_xprt)->xp_ops->xp_getargs)((clone_xprt), (xargs), (argsp)) 525 526 #define SVC_REPLY(clone_xprt, msg) \ 527 (*(clone_xprt)->xp_ops->xp_reply) ((clone_xprt), (msg)) 528 529 #define SVC_FREEARGS(clone_xprt, xargs, argsp) \ 530 (*(clone_xprt)->xp_ops->xp_freeargs)((clone_xprt), (xargs), (argsp)) 531 532 #define SVC_GETRES(clone_xprt, size) \ 533 (*(clone_xprt)->xp_ops->xp_getres)((clone_xprt), (size)) 534 535 #define SVC_FREERES(clone_xprt) \ 536 (*(clone_xprt)->xp_ops->xp_freeres)(clone_xprt) 537 538 #define SVC_DESTROY(xprt) \ 539 (*(xprt)->xp_ops->xp_destroy)(xprt) 540 541 /* 542 * PSARC 2003/523 Contract Private Interfaces 543 * SVC_DUP, SVC_DUPDONE, SVC_DUP_EXT, SVC_DUPDONE_EXT 544 * Changes must be reviewed by Solaris File Sharing 545 * Changes must be communicated to contract-2003-523@sun.com 546 * 547 * SVC_DUP and SVC_DUPDONE are defined here for backward compatibility. 548 */ 549 #define SVC_DUP_EXT(clone_xprt, req, res, size, drpp, dupcachedp) \ 550 (*(clone_xprt)->xp_ops->xp_dup)(req, res, size, drpp, dupcachedp) 551 552 #define SVC_DUPDONE_EXT(clone_xprt, dr, res, resfree, size, status) \ 553 (*(clone_xprt)->xp_ops->xp_dupdone)(dr, res, resfree, size, status) 554 555 #define SVC_DUP(clone_xprt, req, res, size, drpp) \ 556 (*(clone_xprt)->xp_ops->xp_dup)(req, res, size, drpp, NULL) 557 558 #define SVC_DUPDONE(clone_xprt, dr, res, size, status) \ 559 (*(clone_xprt)->xp_ops->xp_dupdone)(dr, res, NULL, size, status) 560 561 #define SVC_CLONE_DESTROY(clone_xprt) \ 562 (*(clone_xprt)->xp_ops->xp_clone_destroy)(clone_xprt) 563 564 565 #define SVC_START(xprt) \ 566 (*(xprt)->xp_ops->xp_start)(xprt) 567 568 #else /* _KERNEL */ 569 570 #define SVC_RECV(xprt, msg) \ 571 (*(xprt)->xp_ops->xp_recv)((xprt), (msg)) 572 #define svc_recv(xprt, msg) \ 573 (*(xprt)->xp_ops->xp_recv)((xprt), (msg)) 574 575 #define SVC_STAT(xprt) \ 576 (*(xprt)->xp_ops->xp_stat)(xprt) 577 #define svc_stat(xprt) \ 578 (*(xprt)->xp_ops->xp_stat)(xprt) 579 580 #define SVC_GETARGS(xprt, xargs, argsp) \ 581 (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp)) 582 #define svc_getargs(xprt, xargs, argsp) \ 583 (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp)) 584 585 #define SVC_REPLY(xprt, msg) \ 586 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg)) 587 #define svc_reply(xprt, msg) \ 588 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg)) 589 590 #define SVC_FREEARGS(xprt, xargs, argsp) \ 591 (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp)) 592 #define svc_freeargs(xprt, xargs, argsp) \ 593 (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp)) 594 595 #define SVC_GETRES(xprt, size) \ 596 (*(xprt)->xp_ops->xp_getres)((xprt), (size)) 597 #define svc_getres(xprt, size) \ 598 (*(xprt)->xp_ops->xp_getres)((xprt), (size)) 599 600 #define SVC_FREERES(xprt) \ 601 (*(xprt)->xp_ops->xp_freeres)(xprt) 602 #define svc_freeres(xprt) \ 603 (*(xprt)->xp_ops->xp_freeres)(xprt) 604 605 #define SVC_DESTROY(xprt) \ 606 (*(xprt)->xp_ops->xp_destroy)(xprt) 607 #define svc_destroy(xprt) \ 608 (*(xprt)->xp_ops->xp_destroy)(xprt) 609 610 /* 611 * PSARC 2003/523 Contract Private Interface 612 * SVC_CONTROL 613 * Changes must be reviewed by Solaris File Sharing 614 * Changes must be communicated to contract-2003-523@sun.com 615 */ 616 #define SVC_CONTROL(xprt, rq, in) \ 617 (*(xprt)->xp_ops->xp_control)((xprt), (rq), (in)) 618 #endif /* _KERNEL */ 619 620 /* 621 * Pool id's reserved for NFS, NLM, and the NFSv4 callback program. 622 */ 623 #define NFS_SVCPOOL_ID 0x01 624 #define NLM_SVCPOOL_ID 0x02 625 #define NFS_CB_SVCPOOL_ID 0x03 626 #define RDC_SVCPOOL_ID 0x05 /* SNDR, PSARC 2001/699 */ 627 628 struct svcpool_args { 629 uint32_t id; /* Pool id */ 630 uint32_t maxthreads; /* Max threads in the pool */ 631 uint32_t redline; /* `Redline' for the pool */ 632 uint32_t qsize; /* `xprt-ready' queue size */ 633 uint32_t timeout; /* svc_poll() timeout */ 634 uint32_t stksize; /* svc_run() stack size */ 635 uint32_t max_same_xprt; /* Max reqs from the same xprt */ 636 }; 637 638 639 #ifdef _KERNEL 640 /* 641 * Transport registration and thread pool creation. 642 */ 643 extern int svc_xprt_register(SVCMASTERXPRT *, int); 644 extern void svc_xprt_unregister(SVCMASTERXPRT *); 645 extern int svc_pool_create(struct svcpool_args *); 646 extern int svc_wait(int); 647 extern int svc_do_run(int); 648 #define SVCPSET_SHUTDOWN_PROC 1 649 #define SVCPSET_UNREGISTER_PROC 2 650 extern int svc_pool_control(int, int, void *); 651 #else /* _KERNEL */ 652 #ifdef __STDC__ 653 extern bool_t rpc_reg(const rpcprog_t, const rpcvers_t, const rpcproc_t, 654 char *(*)(char *), const xdrproc_t, const xdrproc_t, 655 const char *); 656 657 /* 658 * Service registration 659 * 660 * svc_reg(xprt, prog, vers, dispatch, nconf) 661 * const SVCXPRT *xprt; 662 * const rpcprog_t prog; 663 * const rpcvers_t vers; 664 * const void (*dispatch)(); 665 * const struct netconfig *nconf; 666 */ 667 extern bool_t svc_reg(const SVCXPRT *, const rpcprog_t, const rpcvers_t, 668 void (*)(struct svc_req *, SVCXPRT *), 669 const struct netconfig *); 670 671 /* 672 * Service authentication registration 673 * 674 * svc_auth_reg(cred_flavor, handler) 675 * int cred_flavor; 676 * enum auth_stat (*handler)(); 677 */ 678 extern int svc_auth_reg(int, enum auth_stat (*)()); 679 680 /* 681 * Service un-registration 682 * 683 * svc_unreg(prog, vers) 684 * const rpcprog_t prog; 685 * const rpcvers_t vers; 686 */ 687 extern void svc_unreg(const rpcprog_t, const rpcvers_t); 688 689 /* 690 * Transport registration/unregistration. 691 * 692 * xprt_register(xprt) 693 * const SVCXPRT *xprt; 694 * 695 * xprt_unregister(xprt) 696 * const SVCXPRT *xprt; 697 */ 698 extern void xprt_register(const SVCXPRT *); 699 extern void xprt_unregister(const SVCXPRT *); 700 #else /* __STDC__ */ 701 extern bool_t rpc_reg(); 702 extern bool_t svc_reg(); 703 extern bool_t svc_auth_reg(); 704 extern void svc_unreg(); 705 extern void xprt_register(); 706 extern void xprt_unregister(); 707 #endif /* __STDC__ */ 708 #endif /* _KERNEL */ 709 710 711 /* 712 * When the service routine is called, it must first check to see if it 713 * knows about the procedure; if not, it should call svcerr_noproc 714 * and return. If so, it should deserialize its arguments via 715 * SVC_GETARGS (defined above). If the deserialization does not work, 716 * svcerr_decode should be called followed by a return. Successful 717 * decoding of the arguments should be followed the execution of the 718 * procedure's code and a call to svc_sendreply. 719 * 720 * Also, if the service refuses to execute the procedure due to too- 721 * weak authentication parameters, svcerr_weakauth should be called. 722 * Note: do not confuse access-control failure with weak authentication! 723 * 724 * NB: In pure implementations of rpc, the caller always waits for a reply 725 * msg. This message is sent when svc_sendreply is called. 726 * Therefore pure service implementations should always call 727 * svc_sendreply even if the function logically returns void; use 728 * xdr.h - xdr_void for the xdr routine. HOWEVER, connectionful rpc allows 729 * for the abuse of pure rpc via batched calling or pipelining. In the 730 * case of a batched call, svc_sendreply should NOT be called since 731 * this would send a return message, which is what batching tries to avoid. 732 * It is the service/protocol writer's responsibility to know which calls are 733 * batched and which are not. Warning: responding to batch calls may 734 * deadlock the caller and server processes! 735 */ 736 #ifdef __STDC__ 737 extern bool_t svc_sendreply(const SVCXPRT *, const xdrproc_t, const caddr_t); 738 extern void svcerr_decode(const SVCXPRT *); 739 extern void svcerr_weakauth(const SVCXPRT *); 740 extern void svcerr_noproc(const SVCXPRT *); 741 extern void svcerr_progvers(const SVCXPRT *, const rpcvers_t, 742 const rpcvers_t); 743 extern void svcerr_auth(const SVCXPRT *, const enum auth_stat); 744 extern void svcerr_noprog(const SVCXPRT *); 745 extern void svcerr_systemerr(const SVCXPRT *); 746 extern void svcerr_badcred(const SVCXPRT *); 747 #else /* __STDC__ */ 748 extern bool_t svc_sendreply(); 749 extern void svcerr_decode(); 750 extern void svcerr_weakauth(); 751 extern void svcerr_noproc(); 752 extern void svcerr_progvers(); 753 extern void svcerr_auth(); 754 extern void svcerr_noprog(); 755 extern void svcerr_systemerr(); 756 extern void svcerr_badcred(); 757 #endif /* __STDC__ */ 758 759 #ifdef _KERNEL 760 /* 761 * Kernel RPC functions. 762 */ 763 extern void svc_init(void); 764 extern void svc_cots_init(void); 765 extern void svc_clts_init(void); 766 extern void mt_kstat_init(void); 767 extern void mt_kstat_fini(void); 768 extern int svc_tli_kcreate(struct file *, uint_t, char *, 769 struct netbuf *, SVCMASTERXPRT **, 770 SVC_CALLOUT_TABLE *, 771 void (*closeproc)(const SVCMASTERXPRT *), 772 int, bool_t); 773 extern int svc_clts_kcreate(struct file *, uint_t, struct T_info_ack *, 774 SVCMASTERXPRT **); 775 extern int svc_cots_kcreate(struct file *, uint_t, struct T_info_ack *, 776 SVCMASTERXPRT **); 777 extern void svc_queuereq(queue_t *, mblk_t *); 778 extern void svc_queueclean(queue_t *); 779 extern void svc_queueclose(queue_t *); 780 extern int svc_reserve_thread(SVCXPRT *); 781 extern void svc_unreserve_thread(SVCXPRT *); 782 extern callb_cpr_t *svc_detach_thread(SVCXPRT *); 783 784 /* 785 * For RDMA based kRPC. 786 * "rdma_xprt_record" is a reference to master transport handles 787 * in kRPC thread pools. This is an easy way of tracking and shuting 788 * down rdma based kRPC transports on demand. 789 * "rdma_xprt_group" is a list of RDMA based mster transport handles 790 * or records in a kRPC thread pool. 791 */ 792 typedef struct rdma_xprt_record rdma_xprt_record_t; 793 struct rdma_xprt_record { 794 int rtr_type; /* Type of rdma; IB/VI/RDDP */ 795 SVCMASTERXPRT *rtr_xprt_ptr; /* Ptr to master xprt handle */ 796 rdma_xprt_record_t *rtr_next; /* Ptr to next record */ 797 }; 798 799 typedef struct { 800 int rtg_count; /* Number transport records */ 801 int rtg_poolid; /* Pool Id for this group */ 802 rdma_xprt_record_t *rtg_listhead; /* Head of the records list */ 803 } rdma_xprt_group_t; 804 805 extern int svc_rdma_kcreate(char *, SVC_CALLOUT_TABLE *, int, 806 rdma_xprt_group_t *); 807 extern void svc_rdma_kstop(SVCMASTERXPRT *); 808 extern void svc_rdma_kdestroy(SVCMASTERXPRT *); 809 extern void rdma_stop(rdma_xprt_group_t); 810 811 /* 812 * GSS cleanup method. 813 */ 814 extern void rpc_gss_cleanup(SVCXPRT *); 815 #else /* _KERNEL */ 816 /* 817 * Lowest level dispatching -OR- who owns this process anyway. 818 * Somebody has to wait for incoming requests and then call the correct 819 * service routine. The routine svc_run does infinite waiting; i.e., 820 * svc_run never returns. 821 * Since another (co-existant) package may wish to selectively wait for 822 * incoming calls or other events outside of the rpc architecture, the 823 * routine svc_getreq_poll is provided. It must be passed pollfds, the 824 * "in-place" results of a poll call (see poll, section 2). 825 */ 826 827 /* 828 * Global keeper of rpc service descriptors in use 829 * dynamic; must be inspected before each call to select or poll 830 */ 831 extern pollfd_t *svc_pollfd; 832 extern int svc_max_pollfd; 833 extern fd_set svc_fdset; 834 #if !defined(_LP64) && FD_SETSIZE > 1024 835 extern fd_set _new_svc_fdset; 836 #ifdef __PRAGMA_REDEFINE_EXTNAME 837 #pragma redefine_extname svc_fdset _new_svc_fdset 838 #else /* __PRAGMA_REDEFINE_EXTNAME */ 839 #define svc_fdset _new_svc_fdset 840 #endif /* __PRAGMA_REDEFINE_EXTNAME */ 841 #endif /* LP64 && FD_SETSIZE > 1024 */ 842 #define svc_fds svc_fdset.fds_bits[0] /* compatibility */ 843 844 /* 845 * A small program implemented by the svc_rpc implementation itself. 846 * Also see clnt.h for protocol numbers. 847 */ 848 #ifdef __STDC__ 849 extern void svc_getreq(int); 850 extern void svc_getreq_common(const int); 851 extern void svc_getreqset(fd_set *); /* takes fdset instead of int */ 852 extern void svc_getreq_poll(struct pollfd *, const int); 853 extern void svc_run(void); 854 extern void svc_exit(void); 855 #else /* __STDC__ */ 856 extern void rpctest_service(); 857 extern void svc_getreqset(); 858 extern void svc_getreq(); 859 extern void svc_getreq_common(); 860 extern void svc_getreqset(); /* takes fdset instead of int */ 861 extern void svc_getreq_poll(); 862 extern void svc_run(); 863 extern void svc_exit(); 864 #endif /* __STDC__ */ 865 866 /* 867 * Functions used to manage user file descriptors 868 */ 869 typedef int svc_input_id_t; 870 typedef void (*svc_callback_t)(svc_input_id_t id, int fd, 871 unsigned int events, void* cookie); 872 873 #ifdef __STDC__ 874 extern svc_input_id_t svc_add_input(int fd, unsigned int events, 875 svc_callback_t user_callback, 876 void* cookie); 877 extern int svc_remove_input(svc_input_id_t id); 878 #else /* __STDC__ */ 879 extern svc_input_id_t svc_add_input(); 880 extern int svc_remove_input(); 881 #endif 882 883 /* 884 * These are the existing service side transport implementations. 885 * 886 * Transport independent svc_create routine. 887 */ 888 #ifdef __STDC__ 889 extern int svc_create(void (*)(struct svc_req *, SVCXPRT *), 890 const rpcprog_t, const rpcvers_t, 891 const char *); 892 /* 893 * void (*dispatch)(); -- dispatch routine 894 * const rpcprog_t prognum; -- program number 895 * const rpcvers_t versnum; -- version number 896 * const char *nettype; -- network type 897 */ 898 899 /* 900 * Generic server creation routine. It takes a netconfig structure 901 * instead of a nettype. 902 */ 903 extern SVCXPRT *svc_tp_create(void (*)(struct svc_req *, SVCXPRT *), 904 const rpcprog_t, const rpcvers_t, 905 const struct netconfig *); 906 /* 907 * void (*dispatch)(); -- dispatch routine 908 * const rpcprog_t prognum; -- program number 909 * const rpcvers_t versnum; -- version number 910 * const struct netconfig *nconf; -- netconfig structure 911 */ 912 913 /* 914 * Generic TLI create routine 915 */ 916 extern SVCXPRT *svc_tli_create(const int, const struct netconfig *, 917 const struct t_bind *, const uint_t, 918 const uint_t); 919 /* 920 * const int fd; -- connection end point 921 * const struct netconfig *nconf; -- netconfig structure 922 * const struct t_bind *bindaddr; -- local bind address 923 * const uint_t sendsz; -- max sendsize 924 * const uint_t recvsz; -- max recvsize 925 */ 926 927 /* 928 * Connectionless and connectionful create routines. 929 */ 930 extern SVCXPRT *svc_vc_create(const int, const uint_t, const uint_t); 931 /* 932 * const int fd; -- open connection end point 933 * const uint_t sendsize; -- max send size 934 * const uint_t recvsize; -- max recv size 935 */ 936 937 extern SVCXPRT *svc_dg_create(const int, const uint_t, const uint_t); 938 /* 939 * const int fd; -- open connection 940 * const uint_t sendsize; -- max send size 941 * const uint_t recvsize; -- max recv size 942 */ 943 944 /* 945 * the routine takes any *open* TLI file 946 * descriptor as its first input and is used for open connections. 947 */ 948 extern SVCXPRT *svc_fd_create(const int, const uint_t, const uint_t); 949 /* 950 * const int fd; -- open connection end point 951 * const uint_t sendsize; -- max send size 952 * const uint_t recvsize; -- max recv size 953 */ 954 955 /* 956 * Memory based rpc (for speed check and testing) 957 */ 958 extern SVCXPRT *svc_raw_create(void); 959 960 /* 961 * Creation of service over doors transport. 962 */ 963 extern SVCXPRT *svc_door_create(void (*)(struct svc_req *, SVCXPRT *), 964 const rpcprog_t, const rpcvers_t, 965 const uint_t); 966 /* 967 * void (*dispatch)(); -- dispatch routine 968 * const rpcprog_t prognum; -- program number 969 * const rpcvers_t versnum; -- version number 970 * const uint_t sendsize; -- send buffer size 971 */ 972 973 /* 974 * Service control interface 975 */ 976 extern bool_t svc_control(SVCXPRT *, const uint_t, void *); 977 /* 978 * SVCXPRT *svc; -- service to manipulate 979 * const uint_t req; -- request 980 * void *info; -- argument to request 981 */ 982 983 /* 984 * svc_dg_enable_cache() enables the cache on dg transports. 985 */ 986 extern int svc_dg_enablecache(SVCXPRT *, const uint_t); 987 #else /* __STDC__ */ 988 extern int svc_create(); 989 extern SVCXPRT *svc_tp_create(); 990 extern SVCXPRT *svc_tli_create(); 991 extern SVCXPRT *svc_vc_create(); 992 extern SVCXPRT *svc_dg_create(); 993 extern SVCXPRT *svc_fd_create(); 994 extern SVCXPRT *svc_raw_create(); 995 extern SVCXPRT *svc_door_create(); 996 extern int svc_dg_enablecache(); 997 #endif /* __STDC__ */ 998 999 extern boolean_t is_multilevel(rpcprog_t); 1000 1001 #ifdef PORTMAP 1002 /* For backward compatibility */ 1003 #include <rpc/svc_soc.h> 1004 #endif /* PORTMAP */ 1005 1006 /* 1007 * For user level MT hot server functions 1008 */ 1009 1010 /* 1011 * Different MT modes 1012 */ 1013 #define RPC_SVC_MT_NONE 0 /* default, single-threaded */ 1014 #define RPC_SVC_MT_AUTO 1 /* automatic MT mode */ 1015 #define RPC_SVC_MT_USER 2 /* user MT mode */ 1016 1017 #ifdef __STDC__ 1018 extern void svc_done(SVCXPRT *); 1019 #else 1020 extern void svc_done(); 1021 #endif /* __STDC__ */ 1022 1023 /* 1024 * Obtaining local credentials. 1025 */ 1026 typedef struct __svc_local_cred_t { 1027 uid_t euid; /* effective uid */ 1028 gid_t egid; /* effective gid */ 1029 uid_t ruid; /* real uid */ 1030 gid_t rgid; /* real gid */ 1031 pid_t pid; /* caller's pid, or -1 if not available */ 1032 } svc_local_cred_t; 1033 1034 #ifdef __STDC__ 1035 struct ucred_s; 1036 extern void svc_fd_negotiate_ucred(int); 1037 extern int svc_getcallerucred(const SVCXPRT *, struct ucred_s **); 1038 extern bool_t svc_get_local_cred(SVCXPRT *, svc_local_cred_t *); 1039 #else 1040 extern void svc_fd_negotiate_ucred(); 1041 extern int svc_getcallerucred(); 1042 extern bool_t svc_get_local_cred(); 1043 #endif /* __STDC__ */ 1044 1045 /* 1046 * Private interfaces and structures for user level duplicate request caching. 1047 * The interfaces and data structures are not committed and subject to 1048 * change in future releases. Currently only intended for use by automountd. 1049 */ 1050 struct dupreq { 1051 uint32_t dr_xid; 1052 rpcproc_t dr_proc; 1053 rpcvers_t dr_vers; 1054 rpcprog_t dr_prog; 1055 struct netbuf dr_addr; 1056 struct netbuf dr_resp; 1057 int dr_status; 1058 time_t dr_time; 1059 uint_t dr_hash; 1060 struct dupreq *dr_next; 1061 struct dupreq *dr_prev; 1062 struct dupreq *dr_chain; 1063 struct dupreq *dr_prevchain; 1064 }; 1065 1066 /* 1067 * The fixedtime state is defined if we want to expand the routines to 1068 * handle and encompass fixed size caches. 1069 */ 1070 #define DUPCACHE_FIXEDTIME 0 1071 1072 /* 1073 * States of requests for duplicate request caching. 1074 * These are the same as defined for the kernel. 1075 */ 1076 #define DUP_NEW 0x00 /* new entry */ 1077 #define DUP_INPROGRESS 0x01 /* request already going */ 1078 #define DUP_DONE 0x02 /* request done */ 1079 #define DUP_DROP 0x03 /* request dropped */ 1080 #define DUP_ERROR 0x04 /* error in dup req cache */ 1081 1082 #ifdef __STDC__ 1083 extern bool_t __svc_dupcache_init(void *, int, char **); 1084 extern int __svc_dup(struct svc_req *, caddr_t *, uint_t *, char *); 1085 extern int __svc_dupdone(struct svc_req *, caddr_t, uint_t, int, char *); 1086 extern bool_t __svc_vc_dupcache_init(SVCXPRT *, void *, int); 1087 extern int __svc_vc_dup(struct svc_req *, caddr_t *, uint_t *); 1088 extern int __svc_vc_dupdone(struct svc_req *, caddr_t, uint_t, int); 1089 #else 1090 extern bool_t __svc_dupcache_init(); 1091 extern int __svc_dup(); 1092 extern int __svc_dupdone(); 1093 extern bool_t __svc_vc_dupcache_init(); 1094 extern int __svc_vc_dup(); 1095 extern int __svc_vc_dupdone(); 1096 #endif /* __STDC__ */ 1097 #endif /* _KERNEL */ 1098 1099 #ifdef __cplusplus 1100 } 1101 #endif 1102 1103 #endif /* !_RPC_SVC_H */ 1104