xref: /titanic_51/usr/src/uts/common/os/policy.c (revision e3d60c9bd991a9826cbfa63b10595d44e123b9c4)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include <sys/types.h>
29 #include <sys/sysmacros.h>
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/cred_impl.h>
33 #include <sys/vnode.h>
34 #include <sys/vfs.h>
35 #include <sys/stat.h>
36 #include <sys/errno.h>
37 #include <sys/kmem.h>
38 #include <sys/user.h>
39 #include <sys/proc.h>
40 #include <sys/acct.h>
41 #include <sys/ipc_impl.h>
42 #include <sys/cmn_err.h>
43 #include <sys/debug.h>
44 #include <sys/policy.h>
45 #include <sys/kobj.h>
46 #include <sys/msg.h>
47 #include <sys/devpolicy.h>
48 #include <c2/audit.h>
49 #include <sys/varargs.h>
50 #include <sys/klpd.h>
51 #include <sys/modctl.h>
52 #include <sys/disp.h>
53 #include <sys/zone.h>
54 #include <inet/optcom.h>
55 #include <sys/sdt.h>
56 #include <sys/vfs.h>
57 #include <sys/mntent.h>
58 #include <sys/contract_impl.h>
59 
60 /*
61  * There are two possible layers of privilege routines and two possible
62  * levels of secpolicy.  Plus one other we may not be interested in, so
63  * we may need as many as 6 but no more.
64  */
65 #define	MAXPRIVSTACK		6
66 
67 int priv_debug = 0;
68 
69 /*
70  * This file contains the majority of the policy routines.
71  * Since the policy routines are defined by function and not
72  * by privilege, there is quite a bit of duplication of
73  * functions.
74  *
75  * The secpolicy functions must not make assumptions about
76  * locks held or not held as any lock can be held while they're
77  * being called.
78  *
79  * Credentials are read-only so no special precautions need to
80  * be taken while locking them.
81  *
82  * When a new policy check needs to be added to the system the
83  * following procedure should be followed:
84  *
85  *		Pick an appropriate secpolicy_*() function
86  *			-> done if one exists.
87  *		Create a new secpolicy function, preferably with
88  *		a descriptive name using the standard template.
89  *		Pick an appropriate privilege for the policy.
90  *		If no appropraite privilege exists, define new one
91  *		(this should be done with extreme care; in most cases
92  *		little is gained by adding another privilege)
93  *
94  * WHY ROOT IS STILL SPECIAL.
95  *
96  * In a number of the policy functions, there are still explicit
97  * checks for uid 0.  The rationale behind these is that many root
98  * owned files/objects hold configuration information which can give full
99  * privileges to the user once written to.  To prevent escalation
100  * of privilege by allowing just a single privilege to modify root owned
101  * objects, we've added these root specific checks where we considered
102  * them necessary: modifying root owned files, changing uids to 0, etc.
103  *
104  * PRIVILEGE ESCALATION AND ZONES.
105  *
106  * A number of operations potentially allow the caller to achieve
107  * privileges beyond the ones normally required to perform the operation.
108  * For example, if allowed to create a setuid 0 executable, a process can
109  * gain privileges beyond PRIV_FILE_SETID.  Zones, however, place
110  * restrictions on the ability to gain privileges beyond those available
111  * within the zone through file and process manipulation.  Hence, such
112  * operations require that the caller have an effective set that includes
113  * all privileges available within the current zone, or all privileges
114  * if executing in the global zone.
115  *
116  * This is indicated in the priv_policy* policy checking functions
117  * through a combination of parameters.  The "priv" parameter indicates
118  * the privilege that is required, and the "allzone" parameter indicates
119  * whether or not all privileges in the zone are required.  In addition,
120  * priv can be set to PRIV_ALL to indicate that all privileges are
121  * required (regardless of zone).  There are three scenarios of interest:
122  * (1) operation requires a specific privilege
123  * (2) operation requires a specific privilege, and requires all
124  *     privileges available within the zone (or all privileges if in
125  *     the global zone)
126  * (3) operation requires all privileges, regardless of zone
127  *
128  * For (1), priv should be set to the specific privilege, and allzone
129  * should be set to B_FALSE.
130  * For (2), priv should be set to the specific privilege, and allzone
131  * should be set to B_TRUE.
132  * For (3), priv should be set to PRIV_ALL, and allzone should be set
133  * to B_FALSE.
134  *
135  */
136 
137 /*
138  * The privileges are checked against the Effective set for
139  * ordinary processes and checked against the Limit set
140  * for euid 0 processes that haven't manipulated their privilege
141  * sets.
142  */
143 #define	HAS_ALLPRIVS(cr)	priv_isfullset(&CR_OEPRIV(cr))
144 #define	ZONEPRIVS(cr)		((cr)->cr_zone->zone_privset)
145 #define	HAS_ALLZONEPRIVS(cr)	priv_issubset(ZONEPRIVS(cr), &CR_OEPRIV(cr))
146 #define	HAS_PRIVILEGE(cr, pr)	((pr) == PRIV_ALL ? \
147 					HAS_ALLPRIVS(cr) : \
148 					PRIV_ISASSERT(&CR_OEPRIV(cr), pr))
149 
150 /*
151  * Policy checking functions.
152  *
153  * All of the system's policy should be implemented here.
154  */
155 
156 /*
157  * Private functions which take an additional va_list argument to
158  * implement an object specific policy override.
159  */
160 static int priv_policy_ap(const cred_t *, int, boolean_t, int,
161     const char *, va_list);
162 static int priv_policy_va(const cred_t *, int, boolean_t, int,
163     const char *, ...);
164 
165 /*
166  * Generic policy calls
167  *
168  * The "bottom" functions of policy control
169  */
170 static char *
171 mprintf(const char *fmt, ...)
172 {
173 	va_list args;
174 	char *buf;
175 	size_t len;
176 
177 	va_start(args, fmt);
178 	len = vsnprintf(NULL, 0, fmt, args) + 1;
179 	va_end(args);
180 
181 	buf = kmem_alloc(len, KM_NOSLEEP);
182 
183 	if (buf == NULL)
184 		return (NULL);
185 
186 	va_start(args, fmt);
187 	(void) vsnprintf(buf, len, fmt, args);
188 	va_end(args);
189 
190 	return (buf);
191 }
192 
193 /*
194  * priv_policy_errmsg()
195  *
196  * Generate an error message if privilege debugging is enabled system wide
197  * or for this particular process.
198  */
199 
200 #define	FMTHDR	"%s[%d]: missing privilege \"%s\" (euid = %d, syscall = %d)"
201 #define	FMTMSG	" for \"%s\""
202 #define	FMTFUN	" needed at %s+0x%lx"
203 
204 /* The maximum size privilege format: the concatenation of the above */
205 #define	FMTMAX	FMTHDR FMTMSG FMTFUN "\n"
206 
207 static void
208 priv_policy_errmsg(const cred_t *cr, int priv, const char *msg)
209 {
210 	struct proc *me;
211 	pc_t stack[MAXPRIVSTACK];
212 	int depth;
213 	int i;
214 	char *sym;
215 	ulong_t off;
216 	const char *pname;
217 
218 	char *cmd;
219 	char fmt[sizeof (FMTMAX)];
220 
221 	if ((me = curproc) == &p0)
222 		return;
223 
224 	/* Privileges must be defined  */
225 	ASSERT(priv == PRIV_ALL || priv == PRIV_MULTIPLE ||
226 	    priv == PRIV_ALLZONE || priv == PRIV_GLOBAL ||
227 	    priv_getbynum(priv) != NULL);
228 
229 	if (priv == PRIV_ALLZONE && INGLOBALZONE(me))
230 		priv = PRIV_ALL;
231 
232 	if (curthread->t_pre_sys)
233 		ttolwp(curthread)->lwp_badpriv = (short)priv;
234 
235 	if (priv_debug == 0 && (CR_FLAGS(cr) & PRIV_DEBUG) == 0)
236 		return;
237 
238 	(void) strcpy(fmt, FMTHDR);
239 
240 	if (me->p_user.u_comm[0])
241 		cmd = &me->p_user.u_comm[0];
242 	else
243 		cmd = "priv_policy";
244 
245 	if (msg != NULL && *msg != '\0') {
246 		(void) strcat(fmt, FMTMSG);
247 	} else {
248 		(void) strcat(fmt, "%s");
249 		msg = "";
250 	}
251 
252 	sym = NULL;
253 
254 	depth = getpcstack(stack, MAXPRIVSTACK);
255 
256 	/*
257 	 * Try to find the first interesting function on the stack.
258 	 * priv_policy* that's us, so completely uninteresting.
259 	 * suser(), drv_priv(), secpolicy_* are also called from
260 	 * too many locations to convey useful information.
261 	 */
262 	for (i = 0; i < depth; i++) {
263 		sym = kobj_getsymname((uintptr_t)stack[i], &off);
264 		if (sym != NULL &&
265 		    strstr(sym, "hasprocperm") == 0 &&
266 		    strcmp("suser", sym) != 0 &&
267 		    strcmp("ipcaccess", sym) != 0 &&
268 		    strcmp("drv_priv", sym) != 0 &&
269 		    strncmp("secpolicy_", sym, 10) != 0 &&
270 		    strncmp("priv_policy", sym, 11) != 0)
271 			break;
272 	}
273 
274 	if (sym != NULL)
275 		(void) strcat(fmt, FMTFUN);
276 
277 	(void) strcat(fmt, "\n");
278 
279 	switch (priv) {
280 	case PRIV_ALL:
281 		pname = "ALL";
282 		break;
283 	case PRIV_MULTIPLE:
284 		pname = "MULTIPLE";
285 		break;
286 	case PRIV_ALLZONE:
287 		pname = "ZONE";
288 		break;
289 	case PRIV_GLOBAL:
290 		pname = "GLOBAL";
291 		break;
292 	default:
293 		pname = priv_getbynum(priv);
294 		break;
295 	}
296 
297 	if (CR_FLAGS(cr) & PRIV_DEBUG) {
298 		/* Remember last message, just like lwp_badpriv. */
299 		if (curthread->t_pdmsg != NULL) {
300 			kmem_free(curthread->t_pdmsg,
301 			    strlen(curthread->t_pdmsg) + 1);
302 		}
303 
304 		curthread->t_pdmsg = mprintf(fmt, cmd, me->p_pid, pname,
305 		    cr->cr_uid, curthread->t_sysnum, msg, sym, off);
306 
307 		curthread->t_post_sys = 1;
308 	}
309 	if (priv_debug) {
310 		cmn_err(CE_NOTE, fmt, cmd, me->p_pid, pname, cr->cr_uid,
311 		    curthread->t_sysnum, msg, sym, off);
312 	}
313 }
314 
315 /*
316  * Override the policy, if appropriate.  Return 0 if the external
317  * policy engine approves.
318  */
319 static int
320 priv_policy_override(const cred_t *cr, int priv, boolean_t allzone, va_list ap)
321 {
322 	priv_set_t set;
323 	int ret;
324 
325 	if (!(CR_FLAGS(cr) & PRIV_XPOLICY))
326 		return (-1);
327 
328 	if (priv == PRIV_ALL) {
329 		priv_fillset(&set);
330 	} else if (allzone) {
331 		set = *ZONEPRIVS(cr);
332 	} else {
333 		priv_emptyset(&set);
334 		priv_addset(&set, priv);
335 	}
336 	ret = klpd_call(cr, &set, ap);
337 	return (ret);
338 }
339 
340 static int
341 priv_policy_override_set(const cred_t *cr, const priv_set_t *req, ...)
342 {
343 	va_list ap;
344 
345 	if (CR_FLAGS(cr) & PRIV_XPOLICY) {
346 		va_start(ap, req);
347 		return (klpd_call(cr, req, ap));
348 	}
349 	return (-1);
350 }
351 
352 /*
353  * Audit failure, log error message.
354  */
355 static void
356 priv_policy_err(const cred_t *cr, int priv, boolean_t allzone, const char *msg)
357 {
358 
359 	if (audit_active)
360 		audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 0);
361 	DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
362 
363 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) ||
364 	    curthread->t_pre_sys) {
365 		if (allzone && !HAS_ALLZONEPRIVS(cr)) {
366 			priv_policy_errmsg(cr, PRIV_ALLZONE, msg);
367 		} else {
368 			ASSERT(!HAS_PRIVILEGE(cr, priv));
369 			priv_policy_errmsg(cr, priv, msg);
370 		}
371 	}
372 }
373 
374 /*
375  * priv_policy_ap()
376  * return 0 or error.
377  * See block comment above for a description of "priv" and "allzone" usage.
378  */
379 static int
380 priv_policy_ap(const cred_t *cr, int priv, boolean_t allzone, int err,
381     const char *msg, va_list ap)
382 {
383 	if ((HAS_PRIVILEGE(cr, priv) && (!allzone || HAS_ALLZONEPRIVS(cr))) ||
384 	    (!servicing_interrupt() &&
385 	    priv_policy_override(cr, priv, allzone, ap) == 0)) {
386 		if ((allzone || priv == PRIV_ALL ||
387 		    !PRIV_ISASSERT(priv_basic, priv)) &&
388 		    !servicing_interrupt()) {
389 			PTOU(curproc)->u_acflag |= ASU; /* Needed for SVVS */
390 			if (audit_active)
391 				audit_priv(priv,
392 				    allzone ? ZONEPRIVS(cr) : NULL, 1);
393 		}
394 		err = 0;
395 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
396 	} else if (!servicing_interrupt()) {
397 		/* Failure audited in this procedure */
398 		priv_policy_err(cr, priv, allzone, msg);
399 	}
400 	return (err);
401 }
402 
403 int
404 priv_policy_va(const cred_t *cr, int priv, boolean_t allzone, int err,
405     const char *msg, ...)
406 {
407 	int ret;
408 	va_list ap;
409 
410 	va_start(ap, msg);
411 	ret = priv_policy_ap(cr, priv, allzone, err, msg, ap);
412 	va_end(ap);
413 
414 	return (ret);
415 }
416 
417 int
418 priv_policy(const cred_t *cr, int priv, boolean_t allzone, int err,
419     const char *msg)
420 {
421 	return (priv_policy_va(cr, priv, allzone, err, msg, KLPDARG_NOMORE));
422 }
423 
424 /*
425  * Return B_TRUE for sufficient privileges, B_FALSE for insufficient privileges.
426  */
427 boolean_t
428 priv_policy_choice(const cred_t *cr, int priv, boolean_t allzone)
429 {
430 	boolean_t res = HAS_PRIVILEGE(cr, priv) &&
431 	    (!allzone || HAS_ALLZONEPRIVS(cr));
432 
433 	/* Audit success only */
434 	if (res && audit_active &&
435 	    (allzone || priv == PRIV_ALL || !PRIV_ISASSERT(priv_basic, priv)) &&
436 	    !servicing_interrupt()) {
437 		audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 1);
438 	}
439 	if (res) {
440 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
441 	} else {
442 		DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
443 	}
444 	return (res);
445 }
446 
447 /*
448  * Non-auditing variant of priv_policy_choice().
449  */
450 boolean_t
451 priv_policy_only(const cred_t *cr, int priv, boolean_t allzone)
452 {
453 	boolean_t res = HAS_PRIVILEGE(cr, priv) &&
454 	    (!allzone || HAS_ALLZONEPRIVS(cr));
455 
456 	if (res) {
457 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
458 	} else {
459 		DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
460 	}
461 	return (res);
462 }
463 
464 /*
465  * Check whether all privileges in the required set are present.
466  */
467 static int
468 secpolicy_require_set(const cred_t *cr, const priv_set_t *req, const char *msg)
469 {
470 	int priv;
471 	int pfound = -1;
472 	priv_set_t pset;
473 
474 	if (req == PRIV_FULLSET ? HAS_ALLPRIVS(cr) : priv_issubset(req,
475 	    &CR_OEPRIV(cr))) {
476 		return (0);
477 	}
478 
479 	if (priv_policy_override_set(cr, req, KLPDARG_NOMORE) == 0)
480 		return (0);
481 
482 	if (req == PRIV_FULLSET || priv_isfullset(req)) {
483 		priv_policy_err(cr, PRIV_ALL, B_FALSE, msg);
484 		return (EACCES);
485 	}
486 
487 	pset = CR_OEPRIV(cr);		/* present privileges */
488 	priv_inverse(&pset);		/* all non present privileges */
489 	priv_intersect(req, &pset);	/* the actual missing privs */
490 
491 	if (audit_active)
492 		audit_priv(PRIV_NONE, &pset, 0);
493 	/*
494 	 * Privilege debugging; special case "one privilege in set".
495 	 */
496 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) || curthread->t_pre_sys) {
497 		for (priv = 0; priv < nprivs; priv++) {
498 			if (priv_ismember(&pset, priv)) {
499 				if (pfound != -1) {
500 					/* Multiple missing privs */
501 					priv_policy_errmsg(cr, PRIV_MULTIPLE,
502 					    msg);
503 					return (EACCES);
504 				}
505 				pfound = priv;
506 			}
507 		}
508 		ASSERT(pfound != -1);
509 		/* Just the one missing privilege */
510 		priv_policy_errmsg(cr, pfound, msg);
511 	}
512 
513 	return (EACCES);
514 }
515 
516 /*
517  * Called when an operation requires that the caller be in the
518  * global zone, regardless of privilege.
519  */
520 static int
521 priv_policy_global(const cred_t *cr)
522 {
523 	if (crgetzoneid(cr) == GLOBAL_ZONEID)
524 		return (0);	/* success */
525 
526 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) ||
527 	    curthread->t_pre_sys) {
528 		priv_policy_errmsg(cr, PRIV_GLOBAL, NULL);
529 	}
530 	return (EPERM);
531 }
532 
533 /*
534  * Changing process priority
535  */
536 int
537 secpolicy_setpriority(const cred_t *cr)
538 {
539 	return (PRIV_POLICY(cr, PRIV_PROC_PRIOCNTL, B_FALSE, EPERM, NULL));
540 }
541 
542 /*
543  * Binding to a privileged port, port must be specified in host byte
544  * order.
545  */
546 int
547 secpolicy_net_privaddr(const cred_t *cr, in_port_t port, int proto)
548 {
549 	char *reason;
550 	int priv;
551 
552 	switch (port) {
553 	case 137:
554 	case 138:
555 	case 139:
556 	case 445:
557 		/*
558 		 * NBT and SMB ports, these are extra privileged ports,
559 		 * allow bind only if the SYS_SMB privilege is present.
560 		 */
561 		priv = PRIV_SYS_SMB;
562 		reason = "NBT or SMB port";
563 		break;
564 
565 	case 2049:
566 	case 4045:
567 		/*
568 		 * NFS ports, these are extra privileged ports, allow bind
569 		 * only if the SYS_NFS privilege is present.
570 		 */
571 		priv = PRIV_SYS_NFS;
572 		reason = "NFS port";
573 		break;
574 
575 	default:
576 		priv = PRIV_NET_PRIVADDR;
577 		reason = NULL;
578 		break;
579 
580 	}
581 
582 	return (priv_policy_va(cr, priv, B_FALSE, EACCES, reason,
583 	    KLPDARG_PORT, (int)proto, (int)port, KLPDARG_NOMORE));
584 }
585 
586 /*
587  * Binding to a multilevel port on a trusted (labeled) system.
588  */
589 int
590 secpolicy_net_bindmlp(const cred_t *cr)
591 {
592 	return (PRIV_POLICY(cr, PRIV_NET_BINDMLP, B_FALSE, EACCES, NULL));
593 }
594 
595 /*
596  * Allow a communication between a zone and an unlabeled host when their
597  * labels don't match.
598  */
599 int
600 secpolicy_net_mac_aware(const cred_t *cr)
601 {
602 	return (PRIV_POLICY(cr, PRIV_NET_MAC_AWARE, B_FALSE, EACCES, NULL));
603 }
604 
605 /*
606  * Common routine which determines whether a given credential can
607  * act on a given mount.
608  * When called through mount, the parameter needoptcheck is a pointer
609  * to a boolean variable which will be set to either true or false,
610  * depending on whether the mount policy should change the mount options.
611  * In all other cases, needoptcheck should be a NULL pointer.
612  */
613 static int
614 secpolicy_fs_common(cred_t *cr, vnode_t *mvp, const vfs_t *vfsp,
615     boolean_t *needoptcheck)
616 {
617 	boolean_t allzone = B_FALSE;
618 	boolean_t mounting = needoptcheck != NULL;
619 
620 	/*
621 	 * Short circuit the following cases:
622 	 *	vfsp == NULL or mvp == NULL (pure privilege check)
623 	 *	have all privileges - no further checks required
624 	 *	and no mount options need to be set.
625 	 */
626 	if (vfsp == NULL || mvp == NULL || HAS_ALLPRIVS(cr)) {
627 		if (mounting)
628 			*needoptcheck = B_FALSE;
629 
630 		return (priv_policy_va(cr, PRIV_SYS_MOUNT, allzone, EPERM,
631 		    NULL, KLPDARG_VNODE, mvp, (char *)NULL, KLPDARG_NOMORE));
632 	}
633 
634 	/*
635 	 * When operating on an existing mount (either we're not mounting
636 	 * or we're doing a remount and VFS_REMOUNT will be set), zones
637 	 * can operate only on mounts established by the zone itself.
638 	 */
639 	if (!mounting || (vfsp->vfs_flag & VFS_REMOUNT) != 0) {
640 		zoneid_t zoneid = crgetzoneid(cr);
641 
642 		if (zoneid != GLOBAL_ZONEID &&
643 		    vfsp->vfs_zone->zone_id != zoneid) {
644 			return (EPERM);
645 		}
646 	}
647 
648 	if (mounting)
649 		*needoptcheck = B_TRUE;
650 
651 	/*
652 	 * Overlay mounts may hide important stuff; if you can't write to a
653 	 * mount point but would be able to mount on top of it, you can
654 	 * escalate your privileges.
655 	 * So we go about asking the same questions namefs does when it
656 	 * decides whether you can mount over a file or not but with the
657 	 * added restriction that you can only mount on top of a regular
658 	 * file or directory.
659 	 * If we have all the zone's privileges, we skip all other checks,
660 	 * or else we may actually get in trouble inside the automounter.
661 	 */
662 	if ((mvp->v_flag & VROOT) != 0 ||
663 	    (mvp->v_type != VDIR && mvp->v_type != VREG) ||
664 	    HAS_ALLZONEPRIVS(cr)) {
665 		allzone = B_TRUE;
666 	} else {
667 		vattr_t va;
668 		int err;
669 
670 		va.va_mask = AT_UID|AT_MODE;
671 		err = VOP_GETATTR(mvp, &va, 0, cr, NULL);
672 		if (err != 0)
673 			return (err);
674 
675 		if ((err = secpolicy_vnode_owner(cr, va.va_uid)) != 0)
676 			return (err);
677 
678 		if ((va.va_mode & VWRITE) == 0 &&
679 		    secpolicy_vnode_access(cr, mvp, va.va_uid, VWRITE) != 0) {
680 			return (EACCES);
681 		}
682 	}
683 	return (priv_policy_va(cr, PRIV_SYS_MOUNT, allzone, EPERM,
684 	    NULL, KLPDARG_VNODE, mvp, (char *)NULL, KLPDARG_NOMORE));
685 }
686 
687 void
688 secpolicy_fs_mount_clearopts(cred_t *cr, struct vfs *vfsp)
689 {
690 	boolean_t amsuper = HAS_ALLZONEPRIVS(cr);
691 
692 	/*
693 	 * check; if we don't have either "nosuid" or
694 	 * both "nosetuid" and "nodevices", then we add
695 	 * "nosuid"; this depends on how the current
696 	 * implementation works (it first checks nosuid).  In a
697 	 * zone, a user with all zone privileges can mount with
698 	 * "setuid" but never with "devices".
699 	 */
700 	if (!vfs_optionisset(vfsp, MNTOPT_NOSUID, NULL) &&
701 	    (!vfs_optionisset(vfsp, MNTOPT_NODEVICES, NULL) ||
702 	    !vfs_optionisset(vfsp, MNTOPT_NOSETUID, NULL))) {
703 		if (crgetzoneid(cr) == GLOBAL_ZONEID || !amsuper)
704 			vfs_setmntopt(vfsp, MNTOPT_NOSUID, NULL, 0);
705 		else
706 			vfs_setmntopt(vfsp, MNTOPT_NODEVICES, NULL, 0);
707 	}
708 	/*
709 	 * If we're not the local super user, we set the "restrict"
710 	 * option to indicate to automountd that this mount should
711 	 * be handled with care.
712 	 */
713 	if (!amsuper)
714 		vfs_setmntopt(vfsp, MNTOPT_RESTRICT, NULL, 0);
715 
716 }
717 
718 extern vnode_t *rootvp;
719 extern vfs_t *rootvfs;
720 
721 int
722 secpolicy_fs_mount(cred_t *cr, vnode_t *mvp, struct vfs *vfsp)
723 {
724 	boolean_t needoptchk;
725 	int error;
726 
727 	/*
728 	 * If it's a remount, get the underlying mount point,
729 	 * except for the root where we use the rootvp.
730 	 */
731 	if ((vfsp->vfs_flag & VFS_REMOUNT) != 0) {
732 		if (vfsp == rootvfs)
733 			mvp = rootvp;
734 		else
735 			mvp = vfsp->vfs_vnodecovered;
736 	}
737 
738 	error = secpolicy_fs_common(cr, mvp, vfsp, &needoptchk);
739 
740 	if (error == 0 && needoptchk) {
741 		secpolicy_fs_mount_clearopts(cr, vfsp);
742 	}
743 
744 	return (error);
745 }
746 
747 /*
748  * Does the policy computations for "ownership" of a mount;
749  * here ownership is defined as the ability to "mount"
750  * the filesystem originally.  The rootvfs doesn't cover any
751  * vnodes; we attribute its ownership to the rootvp.
752  */
753 static int
754 secpolicy_fs_owner(cred_t *cr, const struct vfs *vfsp)
755 {
756 	vnode_t *mvp;
757 
758 	if (vfsp == NULL)
759 		mvp = NULL;
760 	else if (vfsp == rootvfs)
761 		mvp = rootvp;
762 	else
763 		mvp = vfsp->vfs_vnodecovered;
764 
765 	return (secpolicy_fs_common(cr, mvp, vfsp, NULL));
766 }
767 
768 int
769 secpolicy_fs_unmount(cred_t *cr, struct vfs *vfsp)
770 {
771 	return (secpolicy_fs_owner(cr, vfsp));
772 }
773 
774 /*
775  * Quotas are a resource, but if one has the ability to mount a filesystem, he
776  * should be able to modify quotas on it.
777  */
778 int
779 secpolicy_fs_quota(const cred_t *cr, const vfs_t *vfsp)
780 {
781 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
782 }
783 
784 /*
785  * Exceeding minfree: also a per-mount resource constraint.
786  */
787 int
788 secpolicy_fs_minfree(const cred_t *cr, const vfs_t *vfsp)
789 {
790 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
791 }
792 
793 int
794 secpolicy_fs_config(const cred_t *cr, const vfs_t *vfsp)
795 {
796 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
797 }
798 
799 /* ARGSUSED */
800 int
801 secpolicy_fs_linkdir(const cred_t *cr, const vfs_t *vfsp)
802 {
803 	return (PRIV_POLICY(cr, PRIV_SYS_LINKDIR, B_FALSE, EPERM, NULL));
804 }
805 
806 /*
807  * Name:        secpolicy_vnode_access()
808  *
809  * Parameters:  Process credential
810  *		vnode
811  *		uid of owner of vnode
812  *		permission bits not granted to the caller when examining
813  *		file mode bits (i.e., when a process wants to open a
814  *		mode 444 file for VREAD|VWRITE, this function should be
815  *		called only with a VWRITE argument).
816  *
817  * Normal:      Verifies that cred has the appropriate privileges to
818  *              override the mode bits that were denied.
819  *
820  * Override:    file_dac_execute - if VEXEC bit was denied and vnode is
821  *                      not a directory.
822  *              file_dac_read - if VREAD bit was denied.
823  *              file_dac_search - if VEXEC bit was denied and vnode is
824  *                      a directory.
825  *              file_dac_write - if VWRITE bit was denied.
826  *
827  *		Root owned files are special cased to protect system
828  *		configuration files and such.
829  *
830  * Output:      EACCES - if privilege check fails.
831  */
832 
833 /* ARGSUSED */
834 int
835 secpolicy_vnode_access(const cred_t *cr, vnode_t *vp, uid_t owner, mode_t mode)
836 {
837 	if ((mode & VREAD) && priv_policy_va(cr, PRIV_FILE_DAC_READ, B_FALSE,
838 	    EACCES, NULL, KLPDARG_VNODE, vp, (char *)NULL,
839 	    KLPDARG_NOMORE) != 0) {
840 		return (EACCES);
841 	}
842 
843 	if (mode & VWRITE) {
844 		boolean_t allzone;
845 
846 		if (owner == 0 && cr->cr_uid != 0)
847 			allzone = B_TRUE;
848 		else
849 			allzone = B_FALSE;
850 		if (priv_policy_va(cr, PRIV_FILE_DAC_WRITE, allzone, EACCES,
851 		    NULL, KLPDARG_VNODE, vp, (char *)NULL,
852 		    KLPDARG_NOMORE) != 0) {
853 			return (EACCES);
854 		}
855 	}
856 
857 	if (mode & VEXEC) {
858 		/*
859 		 * Directories use file_dac_search to override the execute bit.
860 		 */
861 		int p = vp->v_type == VDIR ? PRIV_FILE_DAC_SEARCH :
862 		    PRIV_FILE_DAC_EXECUTE;
863 
864 		return (priv_policy_va(cr, p, B_FALSE, EACCES, NULL,
865 		    KLPDARG_VNODE, vp, (char *)NULL, KLPDARG_NOMORE));
866 	}
867 	return (0);
868 }
869 
870 /*
871  * Name:	secpolicy_vnode_setid_modify()
872  *
873  * Normal:	verify that subject can set the file setid flags.
874  *
875  * Output:	EPERM - if not privileged.
876  */
877 
878 static int
879 secpolicy_vnode_setid_modify(const cred_t *cr, uid_t owner)
880 {
881 	/* If changing to suid root, must have all zone privs */
882 	boolean_t allzone = B_TRUE;
883 
884 	if (owner != 0) {
885 		if (owner == cr->cr_uid)
886 			return (0);
887 		allzone = B_FALSE;
888 	}
889 	return (PRIV_POLICY(cr, PRIV_FILE_SETID, allzone, EPERM, NULL));
890 }
891 
892 /*
893  * Are we allowed to retain the set-uid/set-gid bits when
894  * changing ownership or when writing to a file?
895  * "issuid" should be true when set-uid; only in that case
896  * root ownership is checked (setgid is assumed).
897  */
898 int
899 secpolicy_vnode_setid_retain(const cred_t *cred, boolean_t issuidroot)
900 {
901 	if (issuidroot && !HAS_ALLZONEPRIVS(cred))
902 		return (EPERM);
903 
904 	return (!PRIV_POLICY_CHOICE(cred, PRIV_FILE_SETID, B_FALSE));
905 }
906 
907 /*
908  * Name:	secpolicy_vnode_setids_setgids()
909  *
910  * Normal:	verify that subject can set the file setgid flag.
911  *
912  * Output:	EPERM - if not privileged
913  */
914 
915 int
916 secpolicy_vnode_setids_setgids(const cred_t *cred, gid_t gid)
917 {
918 	if (!groupmember(gid, cred))
919 		return (PRIV_POLICY(cred, PRIV_FILE_SETID, B_FALSE, EPERM,
920 		    NULL));
921 	return (0);
922 }
923 
924 /*
925  * Create a file with a group different than any of the groups allowed:
926  * the group of the directory the file is created in, the effective
927  * group or any of the supplementary groups.
928  */
929 int
930 secpolicy_vnode_create_gid(const cred_t *cred)
931 {
932 	if (HAS_PRIVILEGE(cred, PRIV_FILE_CHOWN))
933 		return (PRIV_POLICY(cred, PRIV_FILE_CHOWN, B_FALSE, EPERM,
934 		    NULL));
935 	else
936 		return (PRIV_POLICY(cred, PRIV_FILE_CHOWN_SELF, B_FALSE, EPERM,
937 		    NULL));
938 }
939 
940 /*
941  * Name:	secpolicy_vnode_utime_modify()
942  *
943  * Normal:	verify that subject can modify the utime on a file.
944  *
945  * Output:	EPERM - if access denied.
946  */
947 
948 static int
949 secpolicy_vnode_utime_modify(const cred_t *cred)
950 {
951 	return (PRIV_POLICY(cred, PRIV_FILE_OWNER, B_FALSE, EPERM,
952 	    "modify file times"));
953 }
954 
955 
956 /*
957  * Name:	secpolicy_vnode_setdac()
958  *
959  * Normal:	verify that subject can modify the mode of a file.
960  *		allzone privilege needed when modifying root owned object.
961  *
962  * Output:	EPERM - if access denied.
963  */
964 
965 int
966 secpolicy_vnode_setdac(const cred_t *cred, uid_t owner)
967 {
968 	if (owner == cred->cr_uid)
969 		return (0);
970 
971 	return (PRIV_POLICY(cred, PRIV_FILE_OWNER, owner == 0, EPERM, NULL));
972 }
973 /*
974  * Name:	secpolicy_vnode_stky_modify()
975  *
976  * Normal:	verify that subject can make a file a "sticky".
977  *
978  * Output:	EPERM - if access denied.
979  */
980 
981 int
982 secpolicy_vnode_stky_modify(const cred_t *cred)
983 {
984 	return (PRIV_POLICY(cred, PRIV_SYS_CONFIG, B_FALSE, EPERM,
985 	    "set file sticky"));
986 }
987 
988 /*
989  * Policy determines whether we can remove an entry from a directory,
990  * regardless of permission bits.
991  */
992 int
993 secpolicy_vnode_remove(const cred_t *cr)
994 {
995 	return (PRIV_POLICY(cr, PRIV_FILE_OWNER, B_FALSE, EACCES,
996 	    "sticky directory"));
997 }
998 
999 int
1000 secpolicy_vnode_owner(const cred_t *cr, uid_t owner)
1001 {
1002 	boolean_t allzone = (owner == 0);
1003 
1004 	if (owner == cr->cr_uid)
1005 		return (0);
1006 
1007 	return (PRIV_POLICY(cr, PRIV_FILE_OWNER, allzone, EPERM, NULL));
1008 }
1009 
1010 void
1011 secpolicy_setid_clear(vattr_t *vap, cred_t *cr)
1012 {
1013 	if ((vap->va_mode & (S_ISUID | S_ISGID)) != 0 &&
1014 	    secpolicy_vnode_setid_retain(cr,
1015 	    (vap->va_mode & S_ISUID) != 0 &&
1016 	    (vap->va_mask & AT_UID) != 0 && vap->va_uid == 0) != 0) {
1017 		vap->va_mask |= AT_MODE;
1018 		vap->va_mode &= ~(S_ISUID|S_ISGID);
1019 	}
1020 }
1021 
1022 int
1023 secpolicy_setid_setsticky_clear(vnode_t *vp, vattr_t *vap, const vattr_t *ovap,
1024     cred_t *cr)
1025 {
1026 	int error;
1027 
1028 	if ((vap->va_mode & S_ISUID) != 0 &&
1029 	    (error = secpolicy_vnode_setid_modify(cr,
1030 	    ovap->va_uid)) != 0) {
1031 		return (error);
1032 	}
1033 
1034 	/*
1035 	 * Check privilege if attempting to set the
1036 	 * sticky bit on a non-directory.
1037 	 */
1038 	if (vp->v_type != VDIR && (vap->va_mode & S_ISVTX) != 0 &&
1039 	    secpolicy_vnode_stky_modify(cr) != 0) {
1040 		vap->va_mode &= ~S_ISVTX;
1041 	}
1042 
1043 	/*
1044 	 * Check for privilege if attempting to set the
1045 	 * group-id bit.
1046 	 */
1047 	if ((vap->va_mode & S_ISGID) != 0 &&
1048 	    secpolicy_vnode_setids_setgids(cr, ovap->va_gid) != 0) {
1049 		vap->va_mode &= ~S_ISGID;
1050 	}
1051 
1052 	return (0);
1053 }
1054 
1055 #define	ATTR_FLAG_PRIV(attr, value, cr)	\
1056 	PRIV_POLICY(cr, value ? PRIV_FILE_FLAG_SET : PRIV_ALL, \
1057 	B_FALSE, EPERM, NULL)
1058 
1059 /*
1060  * Check privileges for setting xvattr attributes
1061  */
1062 int
1063 secpolicy_xvattr(xvattr_t *xvap, uid_t owner, cred_t *cr, vtype_t vtype)
1064 {
1065 	xoptattr_t *xoap;
1066 	int error = 0;
1067 
1068 	if ((xoap = xva_getxoptattr(xvap)) == NULL)
1069 		return (EINVAL);
1070 
1071 	/*
1072 	 * First process the DOS bits
1073 	 */
1074 	if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE) ||
1075 	    XVA_ISSET_REQ(xvap, XAT_HIDDEN) ||
1076 	    XVA_ISSET_REQ(xvap, XAT_READONLY) ||
1077 	    XVA_ISSET_REQ(xvap, XAT_SYSTEM) ||
1078 	    XVA_ISSET_REQ(xvap, XAT_CREATETIME)) {
1079 		if ((error = secpolicy_vnode_owner(cr, owner)) != 0)
1080 			return (error);
1081 	}
1082 
1083 	/*
1084 	 * Now handle special attributes
1085 	 */
1086 
1087 	if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE))
1088 		error = ATTR_FLAG_PRIV(XAT_IMMUTABLE,
1089 		    xoap->xoa_immutable, cr);
1090 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_NOUNLINK))
1091 		error = ATTR_FLAG_PRIV(XAT_NOUNLINK,
1092 		    xoap->xoa_nounlink, cr);
1093 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_APPENDONLY))
1094 		error = ATTR_FLAG_PRIV(XAT_APPENDONLY,
1095 		    xoap->xoa_appendonly, cr);
1096 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_NODUMP))
1097 		error = ATTR_FLAG_PRIV(XAT_NODUMP,
1098 		    xoap->xoa_nodump, cr);
1099 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_OPAQUE))
1100 		error = EPERM;
1101 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED)) {
1102 		error = ATTR_FLAG_PRIV(XAT_AV_QUARANTINED,
1103 		    xoap->xoa_av_quarantined, cr);
1104 		if (error == 0 && vtype != VREG && xoap->xoa_av_quarantined)
1105 			error = EINVAL;
1106 	}
1107 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED))
1108 		error = ATTR_FLAG_PRIV(XAT_AV_MODIFIED,
1109 		    xoap->xoa_av_modified, cr);
1110 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP)) {
1111 		error = ATTR_FLAG_PRIV(XAT_AV_SCANSTAMP,
1112 		    xoap->xoa_av_scanstamp, cr);
1113 		if (error == 0 && vtype != VREG)
1114 			error = EINVAL;
1115 	}
1116 	return (error);
1117 }
1118 
1119 /*
1120  * This function checks the policy decisions surrounding the
1121  * vop setattr call.
1122  *
1123  * It should be called after sufficient locks have been established
1124  * on the underlying data structures.  No concurrent modifications
1125  * should be allowed.
1126  *
1127  * The caller must pass in unlocked version of its vaccess function
1128  * this is required because vop_access function should lock the
1129  * node for reading.  A three argument function should be defined
1130  * which accepts the following argument:
1131  * 	A pointer to the internal "node" type (inode *)
1132  *	vnode access bits (VREAD|VWRITE|VEXEC)
1133  *	a pointer to the credential
1134  *
1135  * This function makes the following policy decisions:
1136  *
1137  *		- change permissions
1138  *			- permission to change file mode if not owner
1139  *			- permission to add sticky bit to non-directory
1140  *			- permission to add set-gid bit
1141  *
1142  * The ovap argument should include AT_MODE|AT_UID|AT_GID.
1143  *
1144  * If the vap argument does not include AT_MODE, the mode will be copied from
1145  * ovap.  In certain situations set-uid/set-gid bits need to be removed;
1146  * this is done by marking vap->va_mask to include AT_MODE and va_mode
1147  * is updated to the newly computed mode.
1148  */
1149 
1150 int
1151 secpolicy_vnode_setattr(cred_t *cr, struct vnode *vp, struct vattr *vap,
1152 	const struct vattr *ovap, int flags,
1153 	int unlocked_access(void *, int, cred_t *),
1154 	void *node)
1155 {
1156 	int mask = vap->va_mask;
1157 	int error = 0;
1158 	boolean_t skipaclchk = (flags & ATTR_NOACLCHECK) ? B_TRUE : B_FALSE;
1159 
1160 	if (mask & AT_SIZE) {
1161 		if (vp->v_type == VDIR) {
1162 			error = EISDIR;
1163 			goto out;
1164 		}
1165 
1166 		/*
1167 		 * If ATTR_NOACLCHECK is set in the flags, then we don't
1168 		 * perform the secondary unlocked_access() call since the
1169 		 * ACL (if any) is being checked there.
1170 		 */
1171 		if (skipaclchk == B_FALSE) {
1172 			error = unlocked_access(node, VWRITE, cr);
1173 			if (error)
1174 				goto out;
1175 		}
1176 	}
1177 	if (mask & AT_MODE) {
1178 		/*
1179 		 * If not the owner of the file then check privilege
1180 		 * for two things: the privilege to set the mode at all
1181 		 * and, if we're setting setuid, we also need permissions
1182 		 * to add the set-uid bit, if we're not the owner.
1183 		 * In the specific case of creating a set-uid root
1184 		 * file, we need even more permissions.
1185 		 */
1186 		if ((error = secpolicy_vnode_setdac(cr, ovap->va_uid)) != 0)
1187 			goto out;
1188 
1189 		if ((error = secpolicy_setid_setsticky_clear(vp, vap,
1190 		    ovap, cr)) != 0)
1191 			goto out;
1192 	} else
1193 		vap->va_mode = ovap->va_mode;
1194 
1195 	if (mask & (AT_UID|AT_GID)) {
1196 		boolean_t checkpriv = B_FALSE;
1197 		int priv;
1198 		boolean_t allzone = B_FALSE;
1199 
1200 		/*
1201 		 * Chowning files.
1202 		 *
1203 		 * If you are the file owner:
1204 		 *	chown to other uid		FILE_CHOWN_SELF
1205 		 *	chown to gid (non-member) 	FILE_CHOWN_SELF
1206 		 *	chown to gid (member) 		<none>
1207 		 *
1208 		 * Instead of PRIV_FILE_CHOWN_SELF, FILE_CHOWN is also
1209 		 * acceptable but the first one is reported when debugging.
1210 		 *
1211 		 * If you are not the file owner:
1212 		 *	chown from root			PRIV_FILE_CHOWN + zone
1213 		 *	chown from other to any		PRIV_FILE_CHOWN
1214 		 *
1215 		 */
1216 		if (cr->cr_uid != ovap->va_uid) {
1217 			checkpriv = B_TRUE;
1218 			allzone = (ovap->va_uid == 0);
1219 			priv = PRIV_FILE_CHOWN;
1220 		} else {
1221 			if (((mask & AT_UID) && vap->va_uid != ovap->va_uid) ||
1222 			    ((mask & AT_GID) && vap->va_gid != ovap->va_gid &&
1223 			    !groupmember(vap->va_gid, cr))) {
1224 				checkpriv = B_TRUE;
1225 				priv = HAS_PRIVILEGE(cr, PRIV_FILE_CHOWN) ?
1226 				    PRIV_FILE_CHOWN : PRIV_FILE_CHOWN_SELF;
1227 			}
1228 		}
1229 		/*
1230 		 * If necessary, check privilege to see if update can be done.
1231 		 */
1232 		if (checkpriv &&
1233 		    (error = PRIV_POLICY(cr, priv, allzone, EPERM, NULL))
1234 		    != 0) {
1235 			goto out;
1236 		}
1237 
1238 		/*
1239 		 * If the file has either the set UID or set GID bits
1240 		 * set and the caller can set the bits, then leave them.
1241 		 */
1242 		secpolicy_setid_clear(vap, cr);
1243 	}
1244 	if (mask & (AT_ATIME|AT_MTIME)) {
1245 		/*
1246 		 * If not the file owner and not otherwise privileged,
1247 		 * always return an error when setting the
1248 		 * time other than the current (ATTR_UTIME flag set).
1249 		 * If setting the current time (ATTR_UTIME not set) then
1250 		 * unlocked_access will check permissions according to policy.
1251 		 */
1252 		if (cr->cr_uid != ovap->va_uid) {
1253 			if (flags & ATTR_UTIME)
1254 				error = secpolicy_vnode_utime_modify(cr);
1255 			else if (skipaclchk == B_FALSE) {
1256 				error = unlocked_access(node, VWRITE, cr);
1257 				if (error == EACCES &&
1258 				    secpolicy_vnode_utime_modify(cr) == 0)
1259 					error = 0;
1260 			}
1261 			if (error)
1262 				goto out;
1263 		}
1264 	}
1265 
1266 	/*
1267 	 * Check for optional attributes here by checking the following:
1268 	 */
1269 	if (mask & AT_XVATTR)
1270 		error = secpolicy_xvattr((xvattr_t *)vap, ovap->va_uid, cr,
1271 		    vp->v_type);
1272 out:
1273 	return (error);
1274 }
1275 
1276 /*
1277  * Name:	secpolicy_pcfs_modify_bootpartition()
1278  *
1279  * Normal:	verify that subject can modify a pcfs boot partition.
1280  *
1281  * Output:	EACCES - if privilege check failed.
1282  */
1283 /*ARGSUSED*/
1284 int
1285 secpolicy_pcfs_modify_bootpartition(const cred_t *cred)
1286 {
1287 	return (PRIV_POLICY(cred, PRIV_ALL, B_FALSE, EACCES,
1288 	    "modify pcfs boot partition"));
1289 }
1290 
1291 /*
1292  * System V IPC routines
1293  */
1294 int
1295 secpolicy_ipc_owner(const cred_t *cr, const struct kipc_perm *ip)
1296 {
1297 	if (crgetzoneid(cr) != ip->ipc_zoneid ||
1298 	    (cr->cr_uid != ip->ipc_uid && cr->cr_uid != ip->ipc_cuid)) {
1299 		boolean_t allzone = B_FALSE;
1300 		if (ip->ipc_uid == 0 || ip->ipc_cuid == 0)
1301 			allzone = B_TRUE;
1302 		return (PRIV_POLICY(cr, PRIV_IPC_OWNER, allzone, EPERM, NULL));
1303 	}
1304 	return (0);
1305 }
1306 
1307 int
1308 secpolicy_ipc_config(const cred_t *cr)
1309 {
1310 	return (PRIV_POLICY(cr, PRIV_SYS_IPC_CONFIG, B_FALSE, EPERM, NULL));
1311 }
1312 
1313 int
1314 secpolicy_ipc_access(const cred_t *cr, const struct kipc_perm *ip, mode_t mode)
1315 {
1316 
1317 	boolean_t allzone = B_FALSE;
1318 
1319 	ASSERT((mode & (MSG_R|MSG_W)) != 0);
1320 
1321 	if ((mode & MSG_R) &&
1322 	    PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0)
1323 		return (EACCES);
1324 
1325 	if (mode & MSG_W) {
1326 		if (cr->cr_uid != 0 && (ip->ipc_uid == 0 || ip->ipc_cuid == 0))
1327 			allzone = B_TRUE;
1328 
1329 		return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES,
1330 		    NULL));
1331 	}
1332 	return (0);
1333 }
1334 
1335 int
1336 secpolicy_rsm_access(const cred_t *cr, uid_t owner, mode_t mode)
1337 {
1338 	boolean_t allzone = B_FALSE;
1339 
1340 	ASSERT((mode & (MSG_R|MSG_W)) != 0);
1341 
1342 	if ((mode & MSG_R) &&
1343 	    PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0)
1344 		return (EACCES);
1345 
1346 	if (mode & MSG_W) {
1347 		if (cr->cr_uid != 0 && owner == 0)
1348 			allzone = B_TRUE;
1349 
1350 		return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES,
1351 		    NULL));
1352 	}
1353 	return (0);
1354 }
1355 
1356 /*
1357  * Audit configuration.
1358  */
1359 int
1360 secpolicy_audit_config(const cred_t *cr)
1361 {
1362 	return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL));
1363 }
1364 
1365 /*
1366  * Audit record generation.
1367  */
1368 int
1369 secpolicy_audit_modify(const cred_t *cr)
1370 {
1371 	return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM, NULL));
1372 }
1373 
1374 /*
1375  * Get audit attributes.
1376  * Either PRIV_SYS_AUDIT or PRIV_PROC_AUDIT required; report the
1377  * "Least" of the two privileges on error.
1378  */
1379 int
1380 secpolicy_audit_getattr(const cred_t *cr)
1381 {
1382 	if (!PRIV_POLICY_ONLY(cr, PRIV_SYS_AUDIT, B_FALSE)) {
1383 		return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM,
1384 		    NULL));
1385 	} else {
1386 		return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL));
1387 	}
1388 }
1389 
1390 
1391 /*
1392  * Locking physical memory
1393  */
1394 int
1395 secpolicy_lock_memory(const cred_t *cr)
1396 {
1397 	return (PRIV_POLICY(cr, PRIV_PROC_LOCK_MEMORY, B_FALSE, EPERM, NULL));
1398 }
1399 
1400 /*
1401  * Accounting (both acct(2) and exacct).
1402  */
1403 int
1404 secpolicy_acct(const cred_t *cr)
1405 {
1406 	return (PRIV_POLICY(cr, PRIV_SYS_ACCT, B_FALSE, EPERM, NULL));
1407 }
1408 
1409 /*
1410  * Is this process privileged to change its uids at will?
1411  * Uid 0 is still considered "special" and having the SETID
1412  * privilege is not sufficient to get uid 0.
1413  * Files are owned by root, so the privilege would give
1414  * full access and euid 0 is still effective.
1415  *
1416  * If you have the privilege and euid 0 only then do you
1417  * get the powers of root wrt uid 0.
1418  *
1419  * For gid manipulations, this is should be called with an
1420  * uid of -1.
1421  *
1422  */
1423 int
1424 secpolicy_allow_setid(const cred_t *cr, uid_t newuid, boolean_t checkonly)
1425 {
1426 	boolean_t allzone = B_FALSE;
1427 
1428 	if (newuid == 0 && cr->cr_uid != 0 && cr->cr_suid != 0 &&
1429 	    cr->cr_ruid != 0) {
1430 		allzone = B_TRUE;
1431 	}
1432 
1433 	return (checkonly ? !PRIV_POLICY_ONLY(cr, PRIV_PROC_SETID, allzone) :
1434 	    PRIV_POLICY(cr, PRIV_PROC_SETID, allzone, EPERM, NULL));
1435 }
1436 
1437 
1438 /*
1439  * Acting on a different process: if the mode is for writing,
1440  * the restrictions are more severe.  This is called after
1441  * we've verified that the uids do not match.
1442  */
1443 int
1444 secpolicy_proc_owner(const cred_t *scr, const cred_t *tcr, int mode)
1445 {
1446 	boolean_t allzone = B_FALSE;
1447 
1448 	if ((mode & VWRITE) && scr->cr_uid != 0 &&
1449 	    (tcr->cr_uid == 0 || tcr->cr_ruid == 0 || tcr->cr_suid == 0))
1450 		allzone = B_TRUE;
1451 
1452 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, allzone, EPERM, NULL));
1453 }
1454 
1455 int
1456 secpolicy_proc_access(const cred_t *scr)
1457 {
1458 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EACCES, NULL));
1459 }
1460 
1461 int
1462 secpolicy_proc_excl_open(const cred_t *scr)
1463 {
1464 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EBUSY, NULL));
1465 }
1466 
1467 int
1468 secpolicy_proc_zone(const cred_t *scr)
1469 {
1470 	return (PRIV_POLICY(scr, PRIV_PROC_ZONE, B_FALSE, EPERM, NULL));
1471 }
1472 
1473 /*
1474  * Destroying the system
1475  */
1476 
1477 int
1478 secpolicy_kmdb(const cred_t *scr)
1479 {
1480 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
1481 }
1482 
1483 int
1484 secpolicy_error_inject(const cred_t *scr)
1485 {
1486 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
1487 }
1488 
1489 /*
1490  * Processor sets, cpu configuration, resource pools.
1491  */
1492 int
1493 secpolicy_pset(const cred_t *cr)
1494 {
1495 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1496 }
1497 
1498 int
1499 secpolicy_ponline(const cred_t *cr)
1500 {
1501 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1502 }
1503 
1504 int
1505 secpolicy_pool(const cred_t *cr)
1506 {
1507 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1508 }
1509 
1510 int
1511 secpolicy_blacklist(const cred_t *cr)
1512 {
1513 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1514 }
1515 
1516 /*
1517  * Catch all system configuration.
1518  */
1519 int
1520 secpolicy_sys_config(const cred_t *cr, boolean_t checkonly)
1521 {
1522 	if (checkonly) {
1523 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_CONFIG, B_FALSE) ? 0 :
1524 		    EPERM);
1525 	} else {
1526 		return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1527 	}
1528 }
1529 
1530 /*
1531  * Zone administration (halt, reboot, etc.) from within zone.
1532  */
1533 int
1534 secpolicy_zone_admin(const cred_t *cr, boolean_t checkonly)
1535 {
1536 	if (checkonly) {
1537 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_ADMIN, B_FALSE) ? 0 :
1538 		    EPERM);
1539 	} else {
1540 		return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM,
1541 		    NULL));
1542 	}
1543 }
1544 
1545 /*
1546  * Zone configuration (create, halt, enter).
1547  */
1548 int
1549 secpolicy_zone_config(const cred_t *cr)
1550 {
1551 	/*
1552 	 * Require all privileges to avoid possibility of privilege
1553 	 * escalation.
1554 	 */
1555 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1556 }
1557 
1558 /*
1559  * Various other system configuration calls
1560  */
1561 int
1562 secpolicy_coreadm(const cred_t *cr)
1563 {
1564 	return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL));
1565 }
1566 
1567 int
1568 secpolicy_systeminfo(const cred_t *cr)
1569 {
1570 	return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL));
1571 }
1572 
1573 int
1574 secpolicy_dispadm(const cred_t *cr)
1575 {
1576 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1577 }
1578 
1579 int
1580 secpolicy_settime(const cred_t *cr)
1581 {
1582 	return (PRIV_POLICY(cr, PRIV_SYS_TIME, B_FALSE, EPERM, NULL));
1583 }
1584 
1585 /*
1586  * For realtime users: high resolution clock.
1587  */
1588 int
1589 secpolicy_clock_highres(const cred_t *cr)
1590 {
1591 	return (PRIV_POLICY(cr, PRIV_PROC_CLOCK_HIGHRES, B_FALSE, EPERM,
1592 	    NULL));
1593 }
1594 
1595 /*
1596  * drv_priv() is documented as callable from interrupt context, not that
1597  * anyone ever does, but still.  No debugging or auditing can be done when
1598  * it is called from interrupt context.
1599  * returns 0 on succes, EPERM on failure.
1600  */
1601 int
1602 drv_priv(cred_t *cr)
1603 {
1604 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1605 }
1606 
1607 int
1608 secpolicy_sys_devices(const cred_t *cr)
1609 {
1610 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1611 }
1612 
1613 int
1614 secpolicy_excl_open(const cred_t *cr)
1615 {
1616 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EBUSY, NULL));
1617 }
1618 
1619 int
1620 secpolicy_rctlsys(const cred_t *cr, boolean_t is_zone_rctl)
1621 {
1622 	/* zone.* rctls can only be set from the global zone */
1623 	if (is_zone_rctl && priv_policy_global(cr) != 0)
1624 		return (EPERM);
1625 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1626 }
1627 
1628 int
1629 secpolicy_resource(const cred_t *cr)
1630 {
1631 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1632 }
1633 
1634 /*
1635  * Processes with a real uid of 0 escape any form of accounting, much
1636  * like before.
1637  */
1638 int
1639 secpolicy_newproc(const cred_t *cr)
1640 {
1641 	if (cr->cr_ruid == 0)
1642 		return (0);
1643 
1644 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1645 }
1646 
1647 /*
1648  * Networking
1649  */
1650 int
1651 secpolicy_net_rawaccess(const cred_t *cr)
1652 {
1653 	return (PRIV_POLICY(cr, PRIV_NET_RAWACCESS, B_FALSE, EACCES, NULL));
1654 }
1655 
1656 /*
1657  * Need this privilege for accessing the ICMP device
1658  */
1659 int
1660 secpolicy_net_icmpaccess(const cred_t *cr)
1661 {
1662 	return (PRIV_POLICY(cr, PRIV_NET_ICMPACCESS, B_FALSE, EACCES, NULL));
1663 }
1664 
1665 /*
1666  * There are a few rare cases where the kernel generates ioctls() from
1667  * interrupt context with a credential of kcred rather than NULL.
1668  * In those cases, we take the safe and cheap test.
1669  */
1670 int
1671 secpolicy_net_config(const cred_t *cr, boolean_t checkonly)
1672 {
1673 	if (checkonly) {
1674 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE) ?
1675 		    0 : EPERM);
1676 	} else {
1677 		return (PRIV_POLICY(cr, PRIV_SYS_NET_CONFIG, B_FALSE, EPERM,
1678 		    NULL));
1679 	}
1680 }
1681 
1682 
1683 /*
1684  * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_IP_CONFIG.
1685  *
1686  * There are a few rare cases where the kernel generates ioctls() from
1687  * interrupt context with a credential of kcred rather than NULL.
1688  * In those cases, we take the safe and cheap test.
1689  */
1690 int
1691 secpolicy_ip_config(const cred_t *cr, boolean_t checkonly)
1692 {
1693 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE))
1694 		return (secpolicy_net_config(cr, checkonly));
1695 
1696 	if (checkonly) {
1697 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_IP_CONFIG, B_FALSE) ?
1698 		    0 : EPERM);
1699 	} else {
1700 		return (PRIV_POLICY(cr, PRIV_SYS_IP_CONFIG, B_FALSE, EPERM,
1701 		    NULL));
1702 	}
1703 }
1704 
1705 
1706 /*
1707  * Map IP pseudo privileges to actual privileges.
1708  * So we don't need to recompile IP when we change the privileges.
1709  */
1710 int
1711 secpolicy_ip(const cred_t *cr, int netpriv, boolean_t checkonly)
1712 {
1713 	int priv = PRIV_ALL;
1714 
1715 	switch (netpriv) {
1716 	case OP_CONFIG:
1717 		priv = PRIV_SYS_IP_CONFIG;
1718 		break;
1719 	case OP_RAW:
1720 		priv = PRIV_NET_RAWACCESS;
1721 		break;
1722 	case OP_PRIVPORT:
1723 		priv = PRIV_NET_PRIVADDR;
1724 		break;
1725 	}
1726 	ASSERT(priv != PRIV_ALL);
1727 	if (checkonly)
1728 		return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM);
1729 	else
1730 		return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL));
1731 }
1732 
1733 /*
1734  * Map network pseudo privileges to actual privileges.
1735  * So we don't need to recompile IP when we change the privileges.
1736  */
1737 int
1738 secpolicy_net(const cred_t *cr, int netpriv, boolean_t checkonly)
1739 {
1740 	int priv = PRIV_ALL;
1741 
1742 	switch (netpriv) {
1743 	case OP_CONFIG:
1744 		priv = PRIV_SYS_NET_CONFIG;
1745 		break;
1746 	case OP_RAW:
1747 		priv = PRIV_NET_RAWACCESS;
1748 		break;
1749 	case OP_PRIVPORT:
1750 		priv = PRIV_NET_PRIVADDR;
1751 		break;
1752 	}
1753 	ASSERT(priv != PRIV_ALL);
1754 	if (checkonly)
1755 		return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM);
1756 	else
1757 		return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL));
1758 }
1759 
1760 /*
1761  * Checks for operations that are either client-only or are used by
1762  * both clients and servers.
1763  */
1764 int
1765 secpolicy_nfs(const cred_t *cr)
1766 {
1767 	return (PRIV_POLICY(cr, PRIV_SYS_NFS, B_FALSE, EPERM, NULL));
1768 }
1769 
1770 /*
1771  * Special case for opening rpcmod: have NFS privileges or network
1772  * config privileges.
1773  */
1774 int
1775 secpolicy_rpcmod_open(const cred_t *cr)
1776 {
1777 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NFS, B_FALSE))
1778 		return (secpolicy_nfs(cr));
1779 	else
1780 		return (secpolicy_net_config(cr, NULL));
1781 }
1782 
1783 int
1784 secpolicy_chroot(const cred_t *cr)
1785 {
1786 	return (PRIV_POLICY(cr, PRIV_PROC_CHROOT, B_FALSE, EPERM, NULL));
1787 }
1788 
1789 int
1790 secpolicy_tasksys(const cred_t *cr)
1791 {
1792 	return (PRIV_POLICY(cr, PRIV_PROC_TASKID, B_FALSE, EPERM, NULL));
1793 }
1794 
1795 /*
1796  * Basic privilege checks.
1797  */
1798 int
1799 secpolicy_basic_exec(const cred_t *cr, vnode_t *vp)
1800 {
1801 	return (priv_policy_va(cr, PRIV_PROC_EXEC, B_FALSE, EPERM, NULL,
1802 	    KLPDARG_VNODE, vp, (char *)NULL, KLPDARG_NOMORE));
1803 }
1804 
1805 int
1806 secpolicy_basic_fork(const cred_t *cr)
1807 {
1808 	return (PRIV_POLICY(cr, PRIV_PROC_FORK, B_FALSE, EPERM, NULL));
1809 }
1810 
1811 int
1812 secpolicy_basic_proc(const cred_t *cr)
1813 {
1814 	return (PRIV_POLICY(cr, PRIV_PROC_SESSION, B_FALSE, EPERM, NULL));
1815 }
1816 
1817 /*
1818  * Slightly complicated because we don't want to trigger the policy too
1819  * often.  First we shortcircuit access to "self" (tp == sp) or if
1820  * we don't have the privilege but if we have permission
1821  * just return (0) and we don't flag the privilege as needed.
1822  * Else, we test for the privilege because we either have it or need it.
1823  */
1824 int
1825 secpolicy_basic_procinfo(const cred_t *cr, proc_t *tp, proc_t *sp)
1826 {
1827 	if (tp == sp ||
1828 	    !HAS_PRIVILEGE(cr, PRIV_PROC_INFO) && prochasprocperm(tp, sp, cr)) {
1829 		return (0);
1830 	} else {
1831 		return (PRIV_POLICY(cr, PRIV_PROC_INFO, B_FALSE, EPERM, NULL));
1832 	}
1833 }
1834 
1835 int
1836 secpolicy_basic_link(const cred_t *cr)
1837 {
1838 	return (PRIV_POLICY(cr, PRIV_FILE_LINK_ANY, B_FALSE, EPERM, NULL));
1839 }
1840 
1841 /*
1842  * Additional device protection.
1843  *
1844  * Traditionally, a device has specific permissions on the node in
1845  * the filesystem which govern which devices can be opened by what
1846  * processes.  In certain cases, it is desirable to add extra
1847  * restrictions, as writing to certain devices is identical to
1848  * having a complete run of the system.
1849  *
1850  * This mechanism is called the device policy.
1851  *
1852  * When a device is opened, its policy entry is looked up in the
1853  * policy cache and checked.
1854  */
1855 int
1856 secpolicy_spec_open(const cred_t *cr, struct vnode *vp, int oflag)
1857 {
1858 	devplcy_t *plcy;
1859 	int err;
1860 	struct snode *csp = VTOS(common_specvp(vp));
1861 	priv_set_t pset;
1862 
1863 	mutex_enter(&csp->s_lock);
1864 
1865 	if (csp->s_plcy == NULL || csp->s_plcy->dp_gen != devplcy_gen) {
1866 		plcy = devpolicy_find(vp);
1867 		if (csp->s_plcy)
1868 			dpfree(csp->s_plcy);
1869 		csp->s_plcy = plcy;
1870 		ASSERT(plcy != NULL);
1871 	} else
1872 		plcy = csp->s_plcy;
1873 
1874 	if (plcy == nullpolicy) {
1875 		mutex_exit(&csp->s_lock);
1876 		return (0);
1877 	}
1878 
1879 	dphold(plcy);
1880 
1881 	mutex_exit(&csp->s_lock);
1882 
1883 	if (oflag & FWRITE)
1884 		pset = plcy->dp_wrp;
1885 	else
1886 		pset = plcy->dp_rdp;
1887 	/*
1888 	 * Special case:
1889 	 * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_IP_CONFIG.
1890 	 * If PRIV_SYS_NET_CONFIG is present and PRIV_SYS_IP_CONFIG is
1891 	 * required, replace PRIV_SYS_IP_CONFIG with PRIV_SYS_NET_CONFIG
1892 	 * in the required privilege set before doing the check.
1893 	 */
1894 	if (priv_ismember(&pset, PRIV_SYS_IP_CONFIG) &&
1895 	    priv_ismember(&CR_OEPRIV(cr), PRIV_SYS_NET_CONFIG) &&
1896 	    !priv_ismember(&CR_OEPRIV(cr), PRIV_SYS_IP_CONFIG)) {
1897 		priv_delset(&pset, PRIV_SYS_IP_CONFIG);
1898 		priv_addset(&pset, PRIV_SYS_NET_CONFIG);
1899 	}
1900 
1901 	err = secpolicy_require_set(cr, &pset, "devpolicy");
1902 	dpfree(plcy);
1903 
1904 	return (err);
1905 }
1906 
1907 int
1908 secpolicy_modctl(const cred_t *cr, int cmd)
1909 {
1910 	switch (cmd) {
1911 	case MODINFO:
1912 	case MODGETMAJBIND:
1913 	case MODGETPATH:
1914 	case MODGETPATHLEN:
1915 	case MODGETNAME:
1916 	case MODGETFBNAME:
1917 	case MODGETDEVPOLICY:
1918 	case MODGETDEVPOLICYBYNAME:
1919 	case MODDEVT2INSTANCE:
1920 	case MODSIZEOF_DEVID:
1921 	case MODGETDEVID:
1922 	case MODSIZEOF_MINORNAME:
1923 	case MODGETMINORNAME:
1924 	case MODGETDEVFSPATH_LEN:
1925 	case MODGETDEVFSPATH:
1926 	case MODGETDEVFSPATH_MI_LEN:
1927 	case MODGETDEVFSPATH_MI:
1928 		/* Unprivileged */
1929 		return (0);
1930 	case MODLOAD:
1931 	case MODSETDEVPOLICY:
1932 		return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1933 	default:
1934 		return (secpolicy_sys_config(cr, B_FALSE));
1935 	}
1936 }
1937 
1938 int
1939 secpolicy_console(const cred_t *cr)
1940 {
1941 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1942 }
1943 
1944 int
1945 secpolicy_power_mgmt(const cred_t *cr)
1946 {
1947 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1948 }
1949 
1950 /*
1951  * Simulate terminal input; another escalation of privileges avenue.
1952  */
1953 
1954 int
1955 secpolicy_sti(const cred_t *cr)
1956 {
1957 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1958 }
1959 
1960 boolean_t
1961 secpolicy_net_reply_equal(const cred_t *cr)
1962 {
1963 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1964 }
1965 
1966 int
1967 secpolicy_swapctl(const cred_t *cr)
1968 {
1969 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1970 }
1971 
1972 int
1973 secpolicy_cpc_cpu(const cred_t *cr)
1974 {
1975 	return (PRIV_POLICY(cr, PRIV_CPC_CPU, B_FALSE, EACCES, NULL));
1976 }
1977 
1978 /*
1979  * secpolicy_contract_identity
1980  *
1981  * Determine if the subject may set the process contract FMRI value
1982  */
1983 int
1984 secpolicy_contract_identity(const cred_t *cr)
1985 {
1986 	return (PRIV_POLICY(cr, PRIV_CONTRACT_IDENTITY, B_FALSE, EPERM, NULL));
1987 }
1988 
1989 /*
1990  * secpolicy_contract_observer
1991  *
1992  * Determine if the subject may observe a specific contract's events.
1993  */
1994 int
1995 secpolicy_contract_observer(const cred_t *cr, struct contract *ct)
1996 {
1997 	if (contract_owned(ct, cr, B_FALSE))
1998 		return (0);
1999 	return (PRIV_POLICY(cr, PRIV_CONTRACT_OBSERVER, B_FALSE, EPERM, NULL));
2000 }
2001 
2002 /*
2003  * secpolicy_contract_observer_choice
2004  *
2005  * Determine if the subject may observe any contract's events.  Just
2006  * tests privilege and audits on success.
2007  */
2008 boolean_t
2009 secpolicy_contract_observer_choice(const cred_t *cr)
2010 {
2011 	return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_OBSERVER, B_FALSE));
2012 }
2013 
2014 /*
2015  * secpolicy_contract_event
2016  *
2017  * Determine if the subject may request critical contract events or
2018  * reliable contract event delivery.
2019  */
2020 int
2021 secpolicy_contract_event(const cred_t *cr)
2022 {
2023 	return (PRIV_POLICY(cr, PRIV_CONTRACT_EVENT, B_FALSE, EPERM, NULL));
2024 }
2025 
2026 /*
2027  * secpolicy_contract_event_choice
2028  *
2029  * Determine if the subject may retain contract events in its critical
2030  * set when a change in other terms would normally require a change in
2031  * the critical set.  Just tests privilege and audits on success.
2032  */
2033 boolean_t
2034 secpolicy_contract_event_choice(const cred_t *cr)
2035 {
2036 	return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_EVENT, B_FALSE));
2037 }
2038 
2039 /*
2040  * secpolicy_gart_access
2041  *
2042  * Determine if the subject has sufficient priveleges to make ioctls to agpgart
2043  * device.
2044  */
2045 int
2046 secpolicy_gart_access(const cred_t *cr)
2047 {
2048 	return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM, NULL));
2049 }
2050 
2051 /*
2052  * secpolicy_gart_map
2053  *
2054  * Determine if the subject has sufficient priveleges to map aperture range
2055  * through agpgart driver.
2056  */
2057 int
2058 secpolicy_gart_map(const cred_t *cr)
2059 {
2060 	if (PRIV_POLICY_ONLY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE)) {
2061 		return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM,
2062 		    NULL));
2063 	} else {
2064 		return (PRIV_POLICY(cr, PRIV_GRAPHICS_MAP, B_FALSE, EPERM,
2065 		    NULL));
2066 	}
2067 }
2068 
2069 /*
2070  * secpolicy_zinject
2071  *
2072  * Determine if the subject can inject faults in the ZFS fault injection
2073  * framework.  Requires all privileges.
2074  */
2075 int
2076 secpolicy_zinject(const cred_t *cr)
2077 {
2078 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
2079 }
2080 
2081 /*
2082  * secpolicy_zfs
2083  *
2084  * Determine if the subject has permission to manipulate ZFS datasets
2085  * (not pools).  Equivalent to the SYS_MOUNT privilege.
2086  */
2087 int
2088 secpolicy_zfs(const cred_t *cr)
2089 {
2090 	return (PRIV_POLICY(cr, PRIV_SYS_MOUNT, B_FALSE, EPERM, NULL));
2091 }
2092 
2093 /*
2094  * secpolicy_idmap
2095  *
2096  * Determine if the calling process has permissions to register an SID
2097  * mapping daemon and allocate ephemeral IDs.
2098  */
2099 int
2100 secpolicy_idmap(const cred_t *cr)
2101 {
2102 	return (PRIV_POLICY(cr, PRIV_FILE_SETID, B_TRUE, EPERM, NULL));
2103 }
2104 
2105 /*
2106  * secpolicy_ucode_update
2107  *
2108  * Determine if the subject has sufficient privilege to update microcode.
2109  */
2110 int
2111 secpolicy_ucode_update(const cred_t *scr)
2112 {
2113 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
2114 }
2115 
2116 /*
2117  * secpolicy_sadopen
2118  *
2119  * Determine if the subject has sufficient privilege to access /dev/sad/admin.
2120  * /dev/sad/admin appear in global zone and exclusive-IP zones only.
2121  * In global zone, sys_config is required.
2122  * In exclusive-IP zones, sys_ip_config is required.
2123  * Note that sys_config is prohibited in non-global zones.
2124  */
2125 int
2126 secpolicy_sadopen(const cred_t *credp)
2127 {
2128 	priv_set_t pset;
2129 
2130 	priv_emptyset(&pset);
2131 
2132 	if (crgetzoneid(credp) == GLOBAL_ZONEID)
2133 		priv_addset(&pset, PRIV_SYS_CONFIG);
2134 	else
2135 		priv_addset(&pset, PRIV_SYS_IP_CONFIG);
2136 
2137 	return (secpolicy_require_set(credp, &pset, "devpolicy"));
2138 }
2139 
2140 
2141 /*
2142  * Add privileges to a particular privilege set; this is called when the
2143  * current sets of privileges are not sufficient.  I.e., we should always
2144  * call the policy override functions from here.
2145  * What we are allowed to have is in the Observed Permitted set; so
2146  * we compute the difference between that and the newset.
2147  */
2148 int
2149 secpolicy_require_privs(const cred_t *cr, const priv_set_t *nset)
2150 {
2151 	priv_set_t rqd;
2152 
2153 	rqd = CR_OPPRIV(cr);
2154 
2155 	priv_inverse(&rqd);
2156 	priv_intersect(nset, &rqd);
2157 
2158 	return (secpolicy_require_set(cr, &rqd, NULL));
2159 }
2160 
2161 /*
2162  * secpolicy_smb
2163  *
2164  * Determine if the cred_t has PRIV_SYS_SMB privilege, indicating
2165  * that it has permission to access the smbsrv kernel driver.
2166  * PRIV_POLICY checks the privilege and audits the check.
2167  *
2168  * Returns:
2169  * 0       Driver access is allowed.
2170  * EPERM   Driver access is NOT permitted.
2171  */
2172 int
2173 secpolicy_smb(const cred_t *cr)
2174 {
2175 	return (PRIV_POLICY(cr, PRIV_SYS_SMB, B_FALSE, EPERM, NULL));
2176 }
2177 
2178 /*
2179  * secpolicy_vscan
2180  *
2181  * Determine if cred_t has the necessary privileges to access a file
2182  * for virus scanning and update its extended system attributes.
2183  * PRIV_FILE_DAC_SEARCH, PRIV_FILE_DAC_READ - file access
2184  * PRIV_FILE_FLAG_SET - set extended system attributes
2185  *
2186  * PRIV_POLICY checks the privilege and audits the check.
2187  *
2188  * Returns:
2189  * 0      file access for virus scanning allowed.
2190  * EPERM  file access for virus scanning is NOT permitted.
2191  */
2192 int
2193 secpolicy_vscan(const cred_t *cr)
2194 {
2195 	if ((PRIV_POLICY(cr, PRIV_FILE_DAC_SEARCH, B_FALSE, EPERM, NULL)) ||
2196 	    (PRIV_POLICY(cr, PRIV_FILE_DAC_READ, B_FALSE, EPERM, NULL)) ||
2197 	    (PRIV_POLICY(cr, PRIV_FILE_FLAG_SET, B_FALSE, EPERM, NULL))) {
2198 		return (EPERM);
2199 	}
2200 
2201 	return (0);
2202 }
2203 
2204 /*
2205  * secpolicy_smbfs_login
2206  *
2207  * Determines if the caller can add and delete the smbfs login
2208  * password in the the nsmb kernel module for the CIFS client.
2209  *
2210  * Returns:
2211  * 0       access is allowed.
2212  * EPERM   access is NOT allowed.
2213  */
2214 int
2215 secpolicy_smbfs_login(const cred_t *cr, uid_t uid)
2216 {
2217 	uid_t cruid = crgetruid(cr);
2218 
2219 	if (cruid == uid)
2220 		return (0);
2221 	return (PRIV_POLICY(cr, PRIV_PROC_OWNER, B_FALSE,
2222 	    EPERM, NULL));
2223 }
2224 
2225 /*
2226  * secpolicy_xvm_control
2227  *
2228  * Determines if a caller can control the xVM hypervisor and/or running
2229  * domains (x86 specific).
2230  *
2231  * Returns:
2232  * 0       access is allowed.
2233  * EPERM   access is NOT allowed.
2234  */
2235 int
2236 secpolicy_xvm_control(const cred_t *cr)
2237 {
2238 	if (PRIV_POLICY(cr, PRIV_XVM_CONTROL, B_FALSE, EPERM, NULL))
2239 		return (EPERM);
2240 	return (0);
2241 }
2242