xref: /titanic_51/usr/src/uts/common/io/chxge/ch.c (revision 613a2f6ba31e891e3d947a356daf5e563d43c1ce)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  * This file is part of the Chelsio T1 Ethernet driver.
29  *
30  * Copyright (C) 2003-2005 Chelsio Communications.  All rights reserved.
31  */
32 
33 /*
34  * Solaris Multithreaded STREAMS DLPI Chelsio PCI Ethernet Driver
35  */
36 
37 /* #define CH_DEBUG 1 */
38 #ifdef CH_DEBUG
39 #define	DEBUG_ENTER(a) debug_enter(a)
40 #define	PRINT(a) printf a
41 #else
42 #define	DEBUG_ENTER(a)
43 #define	PRINT(a)
44 #endif
45 
46 #include <sys/types.h>
47 #include <sys/conf.h>
48 #include <sys/debug.h>
49 #include <sys/stropts.h>
50 #include <sys/stream.h>
51 #include <sys/strlog.h>
52 #include <sys/kmem.h>
53 #include <sys/stat.h>
54 #include <sys/kstat.h>
55 #include <sys/modctl.h>
56 #include <sys/errno.h>
57 #include <sys/cmn_err.h>
58 #include <sys/ddi.h>
59 #include <sys/sunddi.h>
60 #include <sys/dlpi.h>
61 #include <sys/ethernet.h>
62 #include <sys/strsun.h>
63 #include <sys/strsubr.h>
64 #include <inet/common.h>
65 #include <inet/nd.h>
66 #include <inet/ip.h>
67 #include <inet/tcp.h>
68 #include <sys/pattr.h>
69 #include <sys/gld.h>
70 #include "ostypes.h"
71 #include "common.h"
72 #include "oschtoe.h"
73 #include "sge.h"
74 #include "regs.h"
75 #include "ch.h"			/* Chelsio Driver specific parameters */
76 #include "version.h"
77 
78 /*
79  * Function prototypes.
80  */
81 static int ch_attach(dev_info_t *, ddi_attach_cmd_t);
82 static int ch_detach(dev_info_t *, ddi_detach_cmd_t);
83 static int ch_quiesce(dev_info_t *);
84 static void ch_free_dma_handles(ch_t *chp);
85 static void ch_set_name(ch_t *chp, int unit);
86 static void ch_free_name(ch_t *chp);
87 static void ch_get_prop(ch_t *chp);
88 
89 #if defined(__sparc)
90 static void ch_free_dvma_handles(ch_t *chp);
91 #endif
92 
93 /* GLD interfaces */
94 static int ch_reset(gld_mac_info_t *);
95 static int ch_start(gld_mac_info_t *);
96 static int ch_stop(gld_mac_info_t *);
97 static int ch_set_mac_address(gld_mac_info_t *, uint8_t *);
98 static int ch_set_multicast(gld_mac_info_t *, uint8_t *, int);
99 static int ch_ioctl(gld_mac_info_t *, queue_t *, mblk_t *);
100 static int ch_set_promiscuous(gld_mac_info_t *, int);
101 static int ch_get_stats(gld_mac_info_t *, struct gld_stats *);
102 static int ch_send(gld_mac_info_t *, mblk_t *);
103 static uint_t ch_intr(gld_mac_info_t *);
104 
105 /*
106  * Data access requirements.
107  */
108 static struct ddi_device_acc_attr le_attr = {
109 	DDI_DEVICE_ATTR_V0,
110 	DDI_STRUCTURE_LE_ACC,
111 	DDI_STRICTORDER_ACC
112 };
113 
114 /*
115  * No swap mapping device attributes
116  */
117 static struct ddi_device_acc_attr null_attr = {
118 	DDI_DEVICE_ATTR_V0,
119 	DDI_NEVERSWAP_ACC,
120 	DDI_STRICTORDER_ACC
121 };
122 
123 /*
124  * STREAMS driver identification struture module_info(9s)
125  *
126  * driver limit values
127  */
128 
129 static	struct module_info ch_minfo = {
130 	CHIDNUM,	/* mi_idnum */
131 	CHNAME,		/* mi_idname */
132 	CHMINPSZ,	/* mi_minpsz */
133 	CHMAXPSZ,	/* mi_maxpsz */
134 	CHHIWAT,	/* mi_hiwat */
135 	CHLOWAT		/* mi_lowat */
136 };
137 
138 /*
139  * STREAMS queue processiong procedures qinit(9s)
140  *
141  * read queue procedures
142  */
143 
144 static struct qinit ch_rinit = {
145 	(int (*)()) NULL, 	/* qi_putp */
146 	gld_rsrv,		/* qi_srvp */
147 	gld_open,		/* qi_qopen */
148 	gld_close,		/* qi_qclose */
149 	(int (*)()) NULL, 	/* qi_qadmin */
150 	&ch_minfo,		/* qi_minfo */
151 	NULL			/* qi_mstat */
152 };
153 
154 /*
155  * STREAMS queue processiong procedures qinit(9s)
156  *
157  * write queue procedures
158  */
159 
160 static struct qinit ch_winit = {
161 	gld_wput,		/* qi_putp */
162 	gld_wsrv,		/* qi_srvp */
163 	(int (*)()) NULL, 	/* qi_qopen */
164 	(int (*)()) NULL, 	/* qi_qclose */
165 	(int (*)()) NULL, 	/* qi_qadmin */
166 	&ch_minfo,		/* qi_minfo */
167 	NULL			/* qi_mstat */
168 };
169 
170 /*
171  * STREAMS entity declaration structure - streamtab(9s)
172  */
173 static struct streamtab	chinfo = {
174 	&ch_rinit,	/* read queue information */
175 	&ch_winit,	/* write queue information */
176 	NULL,		/* st_muxrinit */
177 	NULL		/* st_muxwrinit */
178 };
179 
180 /*
181  * Device driver ops vector - cb_ops(9s)
182  *
183  * charater/block entry points structure.
184  * chinfo identifies driver as a STREAMS driver.
185  */
186 
187 static struct cb_ops cb_ch_ops = {
188 	nulldev,	/* cb_open */
189 	nulldev,	/* cb_close */
190 	nodev,		/* cb_strategy */
191 	nodev,		/* cb_print */
192 	nodev,		/* cb_dump */
193 	nodev,		/* cb_read */
194 	nodev,		/* cb_write */
195 	nodev,		/* cb_ioctl */
196 	nodev,		/* cb_devmap */
197 	nodev,		/* cb_mmap */
198 	nodev,		/* cb_segmap */
199 	nochpoll,	/* cb_chpoll */
200 	ddi_prop_op,	/* report driver property information - prop_op(9e) */
201 	&chinfo,	/* cb_stream */
202 #if defined(__sparc)
203 	D_MP | D_64BIT,
204 #else
205 	D_MP,		/* cb_flag (supports multi-threading) */
206 #endif
207 	CB_REV,		/* cb_rev */
208 	nodev,		/* cb_aread */
209 	nodev		/* cb_awrite */
210 };
211 
212 /*
213  * dev_ops(9S) structure
214  *
215  * Device Operations table, for autoconfiguration
216  */
217 
218 static	struct dev_ops ch_ops = {
219 	DEVO_REV,	/* Driver build version */
220 	0,		/* Initial driver reference count */
221 	gld_getinfo,	/* funcp: get driver information - getinfo(9e) */
222 	nulldev,	/* funcp: entry point obsolute - identify(9e) */
223 	nulldev,	/* funp: probe for device - probe(9e) */
224 	ch_attach,	/* funp: attach driver to dev_info - attach(9e) */
225 	ch_detach,	/* funp: detach driver to unload - detach(9e) */
226 	nodev,		/* funp: reset device (not supported) - dev_ops(9s) */
227 	&cb_ch_ops,	/* ptr to cb_ops structure */
228 	NULL,		/* ptr to nexus bus operations structure (leaf) */
229 	NULL,		/* funp: change device power level - power(9e) */
230 	ch_quiesce,	/* devo_quiesce */
231 };
232 
233 /*
234  * modldrv(9s) structure
235  *
236  * Definition for module specific device driver linkage structures (modctl.h)
237  */
238 
239 static struct modldrv modldrv = {
240 	&mod_driverops,		/* driver module */
241 	VERSION,
242 	&ch_ops,		/* driver ops */
243 };
244 
245 /*
246  * modlinkage(9s) structure
247  *
248  * module linkage base structure (modctl.h)
249  */
250 
251 static struct modlinkage modlinkage = {
252 	MODREV_1,		/* revision # of system */
253 	&modldrv,		/* NULL terminated list of linkage strucures */
254 	NULL
255 };
256 
257 /* ===================== start of STREAMS driver code ================== */
258 
259 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
260 /*
261  * global pointer to toe per-driver control structure.
262  */
263 #define	MAX_CARDS	4
264 ch_t *gchp[MAX_CARDS];
265 #endif
266 
267 kmutex_t in_use_l;
268 uint32_t buffers_in_use[SZ_INUSE];
269 uint32_t in_use_index;
270 
271 /*
272  * Ethernet broadcast address definition.
273  */
274 static struct ether_addr etherbroadcastaddr = {
275 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff
276 };
277 
278 /*
279  * Module initialization functions.
280  *
281  *      Routine         Called by
282  *      _init(9E)       modload(9F)
283  *      _info(9E)       modinfo(9F)
284  *      _fini(9E)       modunload(9F)
285  */
286 
287 /*
288  * _init(9E):
289  *
290  * Initial, one-time, resource allocation and data initialization.
291  */
292 
293 int
294 _init(void)
295 {
296 	int status;
297 
298 	status = mod_install(&modlinkage);
299 
300 	mutex_init(&in_use_l, NULL, MUTEX_DRIVER, NULL);
301 
302 	return (status);
303 }
304 
305 /*
306  * _fini(9E): It is here that any device information that was allocated
307  * during the _init(9E) routine should be released and the module removed
308  * from the system.  In the case of per-instance information, that information
309  * should be released in the _detach(9E) routine.
310  */
311 
312 int
313 _fini(void)
314 {
315 	int status;
316 	int i;
317 	uint32_t t = 0;
318 
319 	for (i = 0; i < SZ_INUSE; i++)
320 		t += buffers_in_use[i];
321 
322 	if (t != NULL)
323 		return (DDI_FAILURE);
324 
325 	status = mod_remove(&modlinkage);
326 
327 	if (status == DDI_SUCCESS)
328 		mutex_destroy(&in_use_l);
329 
330 	return (status);
331 }
332 
333 int
334 _info(struct modinfo *modinfop)
335 {
336 	int status;
337 
338 
339 	status = mod_info(&modlinkage, modinfop);
340 
341 	return (status);
342 }
343 
344 /*
345  * Attach(9E) - This is called on the open to the device.  It creates
346  * an instance of the driver.  In this routine we create the minor
347  * device node.  The routine also initializes all per-unit
348  * mutex's and conditional variables.
349  *
350  * If we were resuming a suspended instance of a device due to power
351  * management, then that would be handled here as well.  For more on
352  * that subject see the man page for pm(9E)
353  *
354  * Interface exists: make available by filling in network interface
355  * record.  System will initialize the interface when it is ready
356  * to accept packets.
357  */
358 int chdebug = 0;
359 int ch_abort_debug = 0;
360 
361 static int
362 ch_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
363 {
364 	ch_t *chp;
365 	int rv;
366 	int unit;
367 #ifdef CH_DEBUG
368 	int Version;
369 	int VendorID;
370 	int DeviceID;
371 	int SubDeviceID;
372 	int Command;
373 #endif
374 	gld_mac_info_t *macinfo;		/* GLD stuff follows */
375 	char *driver;
376 
377 	if (ch_abort_debug)
378 		debug_enter("ch_attach");
379 
380 	if (chdebug)
381 		return (DDI_FAILURE);
382 
383 
384 	if (cmd == DDI_ATTACH) {
385 
386 		unit = ddi_get_instance(dip);
387 
388 		driver = (char *)ddi_driver_name(dip);
389 
390 		PRINT(("driver %s unit: %d\n", driver, unit));
391 
392 		macinfo = gld_mac_alloc(dip);
393 		if (macinfo == NULL) {
394 			PRINT(("macinfo allocation failed\n"));
395 			DEBUG_ENTER("ch_attach");
396 			return (DDI_FAILURE);
397 		}
398 
399 		chp = (ch_t *)kmem_zalloc(sizeof (ch_t), KM_SLEEP);
400 
401 		if (chp == NULL) {
402 			PRINT(("zalloc of chp failed\n"));
403 			DEBUG_ENTER("ch_attach");
404 
405 			gld_mac_free(macinfo);
406 
407 			return (DDI_FAILURE);
408 		}
409 
410 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
411 		/* Solaris TOE support */
412 		gchp[unit] = chp;
413 #endif
414 
415 		PRINT(("attach macinfo: %p chp: %p\n", macinfo, chp));
416 
417 		chp->ch_dip  = dip;
418 		chp->ch_macp = macinfo;
419 		chp->ch_unit = unit;
420 		ch_set_name(chp, unit);
421 
422 		/*
423 		 * map in PCI register spaces
424 		 *
425 		 * PCI register set 0 - PCI configuration space
426 		 * PCI register set 1 - T101 card register space #1
427 		 */
428 
429 		/* map in T101 PCI configuration space */
430 		rv = pci_config_setup(
431 		    dip,		/* ptr to dev's dev_info struct */
432 		    &chp->ch_hpci);	/* ptr to data access handle */
433 
434 		if (rv != DDI_SUCCESS) {
435 			PRINT(("PCI config setup failed\n"));
436 			DEBUG_ENTER("ch_attach");
437 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
438 			gchp[unit] = NULL;
439 #endif
440 			cmn_err(CE_WARN, "%s: ddi_config_setup PCI error %d\n",
441 			    chp->ch_name, rv);
442 
443 			ch_free_name(chp);
444 			kmem_free(chp, sizeof (ch_t));
445 			gld_mac_free(macinfo);
446 
447 			return (DDI_FAILURE);
448 		}
449 
450 		ch_get_prop(chp);
451 
452 		macinfo->gldm_devinfo = dip;
453 		macinfo->gldm_private = (caddr_t)chp;
454 		macinfo->gldm_reset = ch_reset;
455 		macinfo->gldm_start = ch_start;
456 		macinfo->gldm_stop = ch_stop;
457 		macinfo->gldm_set_mac_addr = ch_set_mac_address;
458 		macinfo->gldm_send = ch_send;
459 		macinfo->gldm_set_promiscuous = ch_set_promiscuous;
460 		macinfo->gldm_get_stats = ch_get_stats;
461 		macinfo->gldm_ioctl = ch_ioctl;
462 		macinfo->gldm_set_multicast = ch_set_multicast;
463 		macinfo->gldm_intr = ch_intr;
464 		macinfo->gldm_mctl = NULL;
465 
466 		macinfo->gldm_ident = driver;
467 		macinfo->gldm_type = DL_ETHER;
468 		macinfo->gldm_minpkt = 0;
469 		macinfo->gldm_maxpkt = chp->ch_mtu;
470 		macinfo->gldm_addrlen = ETHERADDRL;
471 		macinfo->gldm_saplen = -2;
472 		macinfo->gldm_ppa = unit;
473 		macinfo->gldm_broadcast_addr =
474 		    etherbroadcastaddr.ether_addr_octet;
475 
476 
477 		/*
478 		 * do a power reset of card
479 		 *
480 		 * 1. set PwrState to D3hot (3)
481 		 * 2. clear PwrState flags
482 		 */
483 		pci_config_put32(chp->ch_hpci, 0x44, 3);
484 		pci_config_put32(chp->ch_hpci, 0x44, 0);
485 
486 		/* delay .5 sec */
487 		DELAY(500000);
488 
489 #ifdef CH_DEBUG
490 		VendorID    = pci_config_get16(chp->ch_hpci, 0);
491 		DeviceID    = pci_config_get16(chp->ch_hpci, 2);
492 		SubDeviceID = pci_config_get16(chp->ch_hpci, 0x2e);
493 		Command = pci_config_get16(chp->ch_hpci, 4);
494 
495 		PRINT(("IDs: %x,%x,%x\n", VendorID, DeviceID, SubDeviceID));
496 		PRINT(("Command: %x\n", Command));
497 #endif
498 		/* map in T101 register space (BAR0) */
499 		rv = ddi_regs_map_setup(
500 		    dip,		/* ptr to dev's dev_info struct */
501 		    BAR0,		/* register address space */
502 		    &chp->ch_bar0,	/* address of offset */
503 		    0,		/* offset into register address space */
504 		    0,		/* length mapped (everything) */
505 		    &le_attr,	/* ptr to device attr structure */
506 		    &chp->ch_hbar0);	/* ptr to data access handle */
507 
508 		if (rv != DDI_SUCCESS) {
509 			PRINT(("map registers failed\n"));
510 			DEBUG_ENTER("ch_attach");
511 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
512 			gchp[unit] = NULL;
513 #endif
514 			cmn_err(CE_WARN,
515 			    "%s: ddi_regs_map_setup BAR0 error %d\n",
516 			    chp->ch_name, rv);
517 
518 			pci_config_teardown(&chp->ch_hpci);
519 			ch_free_name(chp);
520 			kmem_free(chp, sizeof (ch_t));
521 			gld_mac_free(macinfo);
522 
523 			return (DDI_FAILURE);
524 		}
525 
526 #ifdef CH_DEBUG
527 		Version  = ddi_get32(chp->ch_hbar0,
528 		    (uint32_t *)(chp->ch_bar0+0x6c));
529 #endif
530 
531 		(void) ddi_dev_regsize(dip, 1, &chp->ch_bar0sz);
532 
533 		PRINT(("PCI BAR0 space addr: %p\n", chp->ch_bar0));
534 		PRINT(("PCI BAR0 space size: %x\n", chp->ch_bar0sz));
535 		PRINT(("PE Version: %x\n", Version));
536 
537 		/*
538 		 * Add interrupt to system.
539 		 */
540 		rv = ddi_get_iblock_cookie(
541 		    dip,		   /* ptr to dev's dev_info struct */
542 		    0,		   /* interrupt # (0) */
543 		    &chp->ch_icookp); /* ptr to interrupt block cookie */
544 
545 		if (rv != DDI_SUCCESS) {
546 			PRINT(("iblock cookie failed\n"));
547 			DEBUG_ENTER("ch_attach");
548 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
549 			gchp[unit] = NULL;
550 #endif
551 			cmn_err(CE_WARN,
552 			    "%s: ddi_get_iblock_cookie error %d\n",
553 			    chp->ch_name, rv);
554 
555 			ddi_regs_map_free(&chp->ch_hbar0);
556 			pci_config_teardown(&chp->ch_hpci);
557 			ch_free_name(chp);
558 			kmem_free(chp, sizeof (ch_t));
559 			gld_mac_free(macinfo);
560 
561 			return (DDI_FAILURE);
562 		}
563 
564 		/*
565 		 * add interrupt handler before card setup.
566 		 */
567 		rv = ddi_add_intr(
568 		    dip,		/* ptr to dev's dev_info struct */
569 		    0,		/* interrupt # (0) */
570 		    0,		/* iblock cookie ptr (NULL) */
571 		    0,		/* idevice cookie ptr (NULL) */
572 		    gld_intr,	/* function ptr to interrupt handler */
573 		    (caddr_t)macinfo);	/* handler argument */
574 
575 		if (rv != DDI_SUCCESS) {
576 			PRINT(("add_intr failed\n"));
577 			DEBUG_ENTER("ch_attach");
578 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
579 			gchp[unit] = NULL;
580 #endif
581 			cmn_err(CE_WARN, "%s: ddi_add_intr error %d\n",
582 			    chp->ch_name, rv);
583 
584 			ddi_regs_map_free(&chp->ch_hbar0);
585 			pci_config_teardown(&chp->ch_hpci);
586 			ch_free_name(chp);
587 			kmem_free(chp, sizeof (ch_t));
588 			gld_mac_free(macinfo);
589 
590 			return (DDI_FAILURE);
591 		}
592 
593 		/* initalize all the remaining per-card locks */
594 		mutex_init(&chp->ch_lock, NULL, MUTEX_DRIVER,
595 		    (void *)chp->ch_icookp);
596 		mutex_init(&chp->ch_intr, NULL, MUTEX_DRIVER,
597 		    (void *)chp->ch_icookp);
598 		mutex_init(&chp->ch_mc_lck, NULL, MUTEX_DRIVER, NULL);
599 		mutex_init(&chp->ch_dh_lck, NULL, MUTEX_DRIVER, NULL);
600 		mutex_init(&chp->mac_lock, NULL, MUTEX_DRIVER, NULL);
601 
602 		/* ------- initialize Chelsio card ------- */
603 
604 		if (pe_attach(chp)) {
605 			PRINT(("card initialization failed\n"));
606 			DEBUG_ENTER("ch_attach");
607 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
608 			gchp[unit] = NULL;
609 #endif
610 			cmn_err(CE_WARN, "%s: pe_attach failed\n",
611 			    chp->ch_name);
612 
613 			mutex_destroy(&chp->ch_lock);
614 			mutex_destroy(&chp->ch_intr);
615 			mutex_destroy(&chp->ch_mc_lck);
616 			mutex_destroy(&chp->ch_dh_lck);
617 			mutex_destroy(&chp->mac_lock);
618 			ddi_remove_intr(dip, 0, chp->ch_icookp);
619 			ddi_regs_map_free(&chp->ch_hbar0);
620 			pci_config_teardown(&chp->ch_hpci);
621 			ch_free_name(chp);
622 			kmem_free(chp, sizeof (ch_t));
623 			gld_mac_free(macinfo);
624 
625 			return (DDI_FAILURE);
626 		}
627 
628 		/* ------- done with Chelsio card ------- */
629 
630 		/* now can  set mac address */
631 		macinfo->gldm_vendor_addr = pe_get_mac(chp);
632 
633 		macinfo->gldm_cookie = chp->ch_icookp;
634 
635 		/*
636 		 * We only active checksum offload for T2 architectures.
637 		 */
638 		if (is_T2(chp)) {
639 			if (chp->ch_config.cksum_enabled)
640 				macinfo->gldm_capabilities |=
641 				    GLD_CAP_CKSUM_FULL_V4;
642 		} else
643 			chp->ch_config.cksum_enabled = 0;
644 
645 		rv = gld_register(
646 		    dip,		/* ptr to dev's dev_info struct */
647 		    (char *)ddi_driver_name(dip),	/* driver name */
648 		    macinfo);	/* ptr to gld macinfo buffer */
649 
650 		/*
651 		 * The Jumbo frames capability is not yet available
652 		 * in Solaris 10 so registration will fail. MTU > 1500 is
653 		 * supported in Update 1.
654 		 */
655 		if (rv != DDI_SUCCESS) {
656 			cmn_err(CE_NOTE, "MTU > 1500 not supported by GLD.\n");
657 			cmn_err(CE_NOTE, "Setting MTU to 1500. \n");
658 			macinfo->gldm_maxpkt = chp->ch_mtu = 1500;
659 			rv = gld_register(
660 			    dip,	/* ptr to dev's dev_info struct */
661 			    (char *)ddi_driver_name(dip), /* driver name */
662 			    macinfo); /* ptr to gld macinfo buffer */
663 		}
664 
665 
666 		if (rv != DDI_SUCCESS) {
667 			PRINT(("gld_register failed\n"));
668 			DEBUG_ENTER("ch_attach");
669 
670 			cmn_err(CE_WARN, "%s: gld_register error %d\n",
671 			    chp->ch_name, rv);
672 
673 			pe_detach(chp);
674 
675 			mutex_destroy(&chp->ch_lock);
676 			mutex_destroy(&chp->ch_intr);
677 			mutex_destroy(&chp->ch_mc_lck);
678 			mutex_destroy(&chp->ch_dh_lck);
679 			mutex_destroy(&chp->mac_lock);
680 			ddi_remove_intr(dip, 0, chp->ch_icookp);
681 			ddi_regs_map_free(&chp->ch_hbar0);
682 			pci_config_teardown(&chp->ch_hpci);
683 			ch_free_name(chp);
684 			kmem_free(chp, sizeof (ch_t));
685 			gld_mac_free(macinfo);
686 
687 			return (DDI_FAILURE);
688 		}
689 
690 		/*
691 		 * print a banner at boot time (verbose mode), announcing
692 		 * the device pointed to by dip
693 		 */
694 		ddi_report_dev(dip);
695 
696 		if (ch_abort_debug)
697 			debug_enter("ch_attach");
698 
699 		return (DDI_SUCCESS);
700 
701 	} else if (cmd == DDI_RESUME) {
702 		PRINT(("attach resume\n"));
703 		DEBUG_ENTER("ch_attach");
704 		if ((chp = (ch_t *)ddi_get_driver_private(dip)) == NULL)
705 			return (DDI_FAILURE);
706 
707 		mutex_enter(&chp->ch_lock);
708 		chp->ch_flags &= ~PESUSPENDED;
709 		mutex_exit(&chp->ch_lock);
710 		return (DDI_SUCCESS);
711 	} else {
712 		PRINT(("attach: bad command\n"));
713 		DEBUG_ENTER("ch_attach");
714 
715 		return (DDI_FAILURE);
716 	}
717 }
718 
719 /*
720  * quiesce(9E) entry point.
721  *
722  * This function is called when the system is single-threaded at high
723  * PIL with preemption disabled. Therefore, this function must not be
724  * blocked.
725  *
726  * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure.
727  * DDI_FAILURE indicates an error condition and should almost never happen.
728  */
729 static int
730 ch_quiesce(dev_info_t *dip)
731 {
732 	ch_t *chp;
733 	gld_mac_info_t *macinfo =
734 	    (gld_mac_info_t *)ddi_get_driver_private(dip);
735 
736 	chp = (ch_t *)macinfo->gldm_private;
737 	chdebug = 0;
738 	ch_abort_debug = 0;
739 
740 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
741 	gchp[chp->ch_unit] = NULL;
742 #endif
743 
744 	/* Set driver state for this card to IDLE */
745 	chp->ch_state = PEIDLE;
746 
747 	/*
748 	 * Do a power reset of card
749 	 * 1. set PwrState to D3hot (3)
750 	 * 2. clear PwrState flags
751 	 */
752 	pci_config_put32(chp->ch_hpci, 0x44, 3);
753 	pci_config_put32(chp->ch_hpci, 0x44, 0);
754 
755 	/* Wait 0.5 sec */
756 	drv_usecwait(500000);
757 
758 	/*
759 	 * Now stop the chip
760 	 */
761 	chp->ch_refcnt = 0;
762 	chp->ch_state = PESTOP;
763 
764 	/* Disables all interrupts */
765 	t1_interrupts_disable(chp);
766 
767 	/* Disables SGE queues */
768 	t1_write_reg_4(chp->sge->obj, A_SG_CONTROL, 0x0);
769 	t1_write_reg_4(chp->sge->obj, A_SG_INT_CAUSE, 0x0);
770 
771 	return (DDI_SUCCESS);
772 }
773 
774 static int
775 ch_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
776 {
777 	gld_mac_info_t *macinfo;
778 	ch_t *chp;
779 
780 	if (cmd == DDI_DETACH) {
781 		macinfo = (gld_mac_info_t *)ddi_get_driver_private(dip);
782 		chp = (ch_t *)macinfo->gldm_private;
783 
784 		/*
785 		 * fail detach if there are outstanding mblks still
786 		 * in use somewhere.
787 		 */
788 		DEBUG_ENTER("ch_detach");
789 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
790 		mutex_enter(&chp->ch_lock);
791 		if (chp->ch_refcnt > 0) {
792 			mutex_exit(&chp->ch_lock);
793 			return (DDI_FAILURE);
794 		}
795 		mutex_exit(&chp->ch_lock);
796 		gchp[chp->ch_unit] = NULL;
797 #endif
798 		/*
799 		 * set driver state for this card to IDLE. We're
800 		 * shutting down.
801 		 */
802 		mutex_enter(&chp->ch_lock);
803 		chp->ch_state = PEIDLE;
804 		mutex_exit(&chp->ch_lock);
805 
806 		/*
807 		 * do a power reset of card
808 		 *
809 		 * 1. set PwrState to D3hot (3)
810 		 * 2. clear PwrState flags
811 		 */
812 		pci_config_put32(chp->ch_hpci, 0x44, 3);
813 		pci_config_put32(chp->ch_hpci, 0x44, 0);
814 
815 		/* delay .5 sec */
816 		DELAY(500000);
817 
818 		/* free register resources */
819 		(void) gld_unregister(macinfo);
820 
821 		/* make sure no interrupts while shutting down card */
822 		ddi_remove_intr(dip, 0, chp->ch_icookp);
823 
824 		/*
825 		 * reset device and recover resources
826 		 */
827 		pe_detach(chp);
828 
829 		ddi_regs_map_free(&chp->ch_hbar0);
830 		pci_config_teardown(&chp->ch_hpci);
831 		mutex_destroy(&chp->ch_lock);
832 		mutex_destroy(&chp->ch_intr);
833 		mutex_destroy(&chp->ch_mc_lck);
834 		mutex_destroy(&chp->ch_dh_lck);
835 		mutex_destroy(&chp->mac_lock);
836 		ch_free_dma_handles(chp);
837 #if defined(__sparc)
838 		ch_free_dvma_handles(chp);
839 #endif
840 		ch_free_name(chp);
841 		kmem_free(chp, sizeof (ch_t));
842 		gld_mac_free(macinfo);
843 
844 		DEBUG_ENTER("ch_detach end");
845 
846 		return (DDI_SUCCESS);
847 
848 	} else if ((cmd == DDI_SUSPEND) || (cmd == DDI_PM_SUSPEND)) {
849 		DEBUG_ENTER("suspend");
850 		if ((chp = (ch_t *)ddi_get_driver_private(dip)) == NULL)
851 			return (DDI_FAILURE);
852 		mutex_enter(&chp->ch_lock);
853 		chp->ch_flags |= PESUSPENDED;
854 		mutex_exit(&chp->ch_lock);
855 #ifdef TODO
856 		/* Un-initialize (STOP) T101 */
857 #endif
858 		return (DDI_SUCCESS);
859 	} else
860 		return (DDI_FAILURE);
861 }
862 
863 /*
864  * ch_alloc_dma_mem
865  *
866  * allocates DMA handle
867  * allocates kernel memory
868  * allocates DMA access handle
869  *
870  * chp - per-board descriptor
871  * type - byteswap mapping?
872  * flags - type of mapping
873  * size - # bytes mapped
874  * paddr - physical address
875  * dh - ddi dma handle
876  * ah - ddi access handle
877  */
878 
879 void *
880 ch_alloc_dma_mem(ch_t *chp, int type, int flags, int size, uint64_t *paddr,
881 	ulong_t *dh, ulong_t *ah)
882 {
883 	ddi_dma_attr_t ch_dma_attr;
884 	ddi_dma_cookie_t cookie;
885 	ddi_dma_handle_t ch_dh;
886 	ddi_acc_handle_t ch_ah;
887 	ddi_device_acc_attr_t *dev_attrp;
888 	caddr_t ch_vaddr;
889 	size_t rlen;
890 	uint_t count;
891 	uint_t mapping;
892 	uint_t align;
893 	uint_t rv;
894 	uint_t direction;
895 
896 	mapping = (flags&DMA_STREAM)?DDI_DMA_STREAMING:DDI_DMA_CONSISTENT;
897 	if (flags & DMA_4KALN)
898 		align = 0x4000;
899 	else if (flags & DMA_SMALN)
900 		align = chp->ch_sm_buf_aln;
901 	else if (flags & DMA_BGALN)
902 		align = chp->ch_bg_buf_aln;
903 	else {
904 		cmn_err(CE_WARN, "ch_alloc_dma_mem(%s): bad alignment flag\n",
905 		    chp->ch_name);
906 		return (0);
907 	}
908 	direction = (flags&DMA_OUT)?DDI_DMA_WRITE:DDI_DMA_READ;
909 
910 	/*
911 	 * dynamically create a dma attribute structure
912 	 */
913 	ch_dma_attr.dma_attr_version = DMA_ATTR_V0;
914 	ch_dma_attr.dma_attr_addr_lo = 0;
915 	ch_dma_attr.dma_attr_addr_hi = 0xffffffffffffffff;
916 	ch_dma_attr.dma_attr_count_max = 0x00ffffff;
917 	ch_dma_attr.dma_attr_align = align;
918 	ch_dma_attr.dma_attr_burstsizes = 0xfff;
919 	ch_dma_attr.dma_attr_minxfer = 1;
920 	ch_dma_attr.dma_attr_maxxfer = 0x00ffffff;
921 	ch_dma_attr.dma_attr_seg = 0xffffffff;
922 	ch_dma_attr.dma_attr_sgllen = 1;
923 	ch_dma_attr.dma_attr_granular = 1;
924 	ch_dma_attr.dma_attr_flags = 0;
925 
926 	rv = ddi_dma_alloc_handle(
927 	    chp->ch_dip,		/* device dev_info structure */
928 	    &ch_dma_attr,		/* DMA attributes */
929 	    DDI_DMA_SLEEP,		/* Wait if no memory */
930 	    NULL,			/* no argument to callback */
931 	    &ch_dh);			/* DMA handle */
932 	if (rv != DDI_SUCCESS) {
933 
934 		cmn_err(CE_WARN,
935 		    "%s: ch_alloc_dma_mem: ddi_dma_alloc_handle error %d\n",
936 		    chp->ch_name, rv);
937 
938 		return (0);
939 	}
940 
941 	/* set byte order for data xfer */
942 	if (type)
943 		dev_attrp = &null_attr;
944 	else
945 		dev_attrp = &le_attr;
946 
947 	rv = ddi_dma_mem_alloc(
948 	    ch_dh,		/* dma handle */
949 	    size,		/* size desired allocate */
950 	    dev_attrp,		/* access attributes */
951 	    mapping,
952 	    DDI_DMA_SLEEP,	/* wait for resources */
953 	    NULL,		/* no argument */
954 	    &ch_vaddr,		/* allocated memory */
955 	    &rlen,		/* real size allocated */
956 	    &ch_ah);		/* data access handle */
957 	if (rv != DDI_SUCCESS) {
958 		ddi_dma_free_handle(&ch_dh);
959 
960 		cmn_err(CE_WARN,
961 		    "%s: ch_alloc_dma_mem: ddi_dma_mem_alloc error %d\n",
962 		    chp->ch_name, rv);
963 
964 		return (0);
965 	}
966 
967 	rv = ddi_dma_addr_bind_handle(
968 	    ch_dh,				/* dma handle */
969 	    (struct as *)0,			/* kernel address space */
970 	    ch_vaddr,				/* virtual address */
971 	    rlen,				/* length of object */
972 	    direction|mapping,
973 	    DDI_DMA_SLEEP,			/* Wait for resources */
974 	    NULL,				/* no argument */
975 	    &cookie,				/* dma cookie */
976 	    &count);
977 	if (rv != DDI_DMA_MAPPED) {
978 		ddi_dma_mem_free(&ch_ah);
979 		ddi_dma_free_handle(&ch_dh);
980 
981 		cmn_err(CE_WARN,
982 		    "%s: ch_alloc_dma_mem: ddi_dma_addr_bind_handle error %d\n",
983 		    chp->ch_name, rv);
984 
985 		return (0);
986 	}
987 
988 	if (count != 1) {
989 		cmn_err(CE_WARN,
990 		    "%s: ch_alloc_dma_mem: ch_alloc_dma_mem cookie count %d\n",
991 		    chp->ch_name, count);
992 		PRINT(("ch_alloc_dma_mem cookie count %d\n", count));
993 
994 		ddi_dma_mem_free(&ch_ah);
995 		ddi_dma_free_handle(&ch_dh);
996 
997 		return (0);
998 	}
999 
1000 	*paddr = cookie.dmac_laddress;
1001 
1002 	*(ddi_dma_handle_t *)dh = ch_dh;
1003 	*(ddi_acc_handle_t *)ah = ch_ah;
1004 
1005 	return ((void *)ch_vaddr);
1006 }
1007 
1008 /*
1009  * ch_free_dma_mem
1010  *
1011  * frees resources allocated by ch_alloc_dma_mem()
1012  *
1013  * frees DMA handle
1014  * frees kernel memory
1015  * frees DMA access handle
1016  */
1017 
1018 void
1019 ch_free_dma_mem(ulong_t dh, ulong_t ah)
1020 {
1021 	ddi_dma_handle_t ch_dh = (ddi_dma_handle_t)dh;
1022 	ddi_acc_handle_t ch_ah = (ddi_acc_handle_t)ah;
1023 
1024 	(void) ddi_dma_unbind_handle(ch_dh);
1025 	ddi_dma_mem_free(&ch_ah);
1026 	ddi_dma_free_handle(&ch_dh);
1027 }
1028 
1029 /*
1030  * create a dma handle and return a dma handle entry.
1031  */
1032 free_dh_t *
1033 ch_get_dma_handle(ch_t *chp)
1034 {
1035 	ddi_dma_handle_t ch_dh;
1036 	ddi_dma_attr_t ch_dma_attr;
1037 	free_dh_t *dhe;
1038 	int rv;
1039 
1040 	dhe = (free_dh_t *)kmem_zalloc(sizeof (*dhe), KM_SLEEP);
1041 
1042 	ch_dma_attr.dma_attr_version = DMA_ATTR_V0;
1043 	ch_dma_attr.dma_attr_addr_lo = 0;
1044 	ch_dma_attr.dma_attr_addr_hi = 0xffffffffffffffff;
1045 	ch_dma_attr.dma_attr_count_max = 0x00ffffff;
1046 	ch_dma_attr.dma_attr_align = 1;
1047 	ch_dma_attr.dma_attr_burstsizes = 0xfff;
1048 	ch_dma_attr.dma_attr_minxfer = 1;
1049 	ch_dma_attr.dma_attr_maxxfer = 0x00ffffff;
1050 	ch_dma_attr.dma_attr_seg = 0xffffffff;
1051 	ch_dma_attr.dma_attr_sgllen = 5;
1052 	ch_dma_attr.dma_attr_granular = 1;
1053 	ch_dma_attr.dma_attr_flags = 0;
1054 
1055 	rv = ddi_dma_alloc_handle(
1056 	    chp->ch_dip,		/* device dev_info */
1057 	    &ch_dma_attr,		/* DMA attributes */
1058 	    DDI_DMA_SLEEP,		/* Wait if no memory */
1059 	    NULL,			/* no argument */
1060 	    &ch_dh);			/* DMA handle */
1061 	if (rv != DDI_SUCCESS) {
1062 
1063 		cmn_err(CE_WARN,
1064 		    "%s: ch_get_dma_handle: ddi_dma_alloc_handle error %d\n",
1065 		    chp->ch_name, rv);
1066 
1067 		kmem_free(dhe, sizeof (*dhe));
1068 
1069 		return ((free_dh_t *)0);
1070 	}
1071 
1072 	dhe->dhe_dh = (ulong_t)ch_dh;
1073 
1074 	return (dhe);
1075 }
1076 
1077 /*
1078  * free the linked list of dma descriptor entries.
1079  */
1080 static void
1081 ch_free_dma_handles(ch_t *chp)
1082 {
1083 	free_dh_t *dhe, *the;
1084 
1085 	dhe = chp->ch_dh;
1086 	while (dhe) {
1087 		ddi_dma_free_handle((ddi_dma_handle_t *)&dhe->dhe_dh);
1088 		the = dhe;
1089 		dhe = dhe->dhe_next;
1090 		kmem_free(the, sizeof (*the));
1091 	}
1092 	chp->ch_dh = NULL;
1093 }
1094 
1095 /*
1096  * ch_bind_dma_handle()
1097  *
1098  * returns # of entries used off of cmdQ_ce_t array to hold physical addrs.
1099  *
1100  * chp - per-board descriptor
1101  * size - # bytes mapped
1102  * vaddr - virtual address
1103  * cmp - array of cmdQ_ce_t entries
1104  * cnt - # free entries in cmp array
1105  */
1106 
1107 uint32_t
1108 ch_bind_dma_handle(ch_t *chp, int size, caddr_t vaddr, cmdQ_ce_t *cmp,
1109 	uint32_t cnt)
1110 {
1111 	ddi_dma_cookie_t cookie;
1112 	ddi_dma_handle_t ch_dh;
1113 	uint_t count;
1114 	uint32_t n = 1;
1115 	free_dh_t *dhe;
1116 	uint_t rv;
1117 
1118 	mutex_enter(&chp->ch_dh_lck);
1119 	if ((dhe = chp->ch_dh) != NULL) {
1120 		chp->ch_dh = dhe->dhe_next;
1121 	}
1122 	mutex_exit(&chp->ch_dh_lck);
1123 
1124 	if (dhe == NULL) {
1125 		return (0);
1126 	}
1127 
1128 	ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1129 
1130 	rv = ddi_dma_addr_bind_handle(
1131 	    ch_dh,		/* dma handle */
1132 	    (struct as *)0,	/* kernel address space */
1133 	    vaddr,		/* virtual address */
1134 	    size,		/* length of object */
1135 	    DDI_DMA_WRITE|DDI_DMA_STREAMING,
1136 	    DDI_DMA_SLEEP,	/* Wait for resources */
1137 	    NULL,		/* no argument */
1138 	    &cookie,	/* dma cookie */
1139 	    &count);
1140 	if (rv != DDI_DMA_MAPPED) {
1141 
1142 		/* return dma header descriptor back to free list */
1143 		mutex_enter(&chp->ch_dh_lck);
1144 		dhe->dhe_next = chp->ch_dh;
1145 		chp->ch_dh = dhe;
1146 		mutex_exit(&chp->ch_dh_lck);
1147 
1148 		cmn_err(CE_WARN,
1149 		    "%s: ch_bind_dma_handle: ddi_dma_addr_bind_handle err %d\n",
1150 		    chp->ch_name, rv);
1151 
1152 		return (0);
1153 	}
1154 
1155 	/*
1156 	 * abort if we've run out of space
1157 	 */
1158 	if (count > cnt) {
1159 		/* return dma header descriptor back to free list */
1160 		mutex_enter(&chp->ch_dh_lck);
1161 		dhe->dhe_next = chp->ch_dh;
1162 		chp->ch_dh = dhe;
1163 		mutex_exit(&chp->ch_dh_lck);
1164 
1165 		return (0);
1166 	}
1167 
1168 	cmp->ce_pa = cookie.dmac_laddress;
1169 	cmp->ce_dh = NULL;
1170 	cmp->ce_len = cookie.dmac_size;
1171 	cmp->ce_mp = NULL;
1172 	cmp->ce_flg = DH_DMA;
1173 
1174 	while (--count) {
1175 		cmp++;
1176 		n++;
1177 		ddi_dma_nextcookie(ch_dh, &cookie);
1178 		cmp->ce_pa = cookie.dmac_laddress;
1179 		cmp->ce_dh = NULL;
1180 		cmp->ce_len = cookie.dmac_size;
1181 		cmp->ce_mp = NULL;
1182 		cmp->ce_flg = DH_DMA;
1183 	}
1184 
1185 	cmp->ce_dh = dhe;
1186 
1187 	return (n);
1188 }
1189 
1190 /*
1191  * ch_unbind_dma_handle()
1192  *
1193  * frees resources alloacted by ch_bind_dma_handle().
1194  *
1195  * frees DMA handle
1196  */
1197 
1198 void
1199 ch_unbind_dma_handle(ch_t *chp, free_dh_t *dhe)
1200 {
1201 	ddi_dma_handle_t ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1202 
1203 	if (ddi_dma_unbind_handle(ch_dh))
1204 		cmn_err(CE_WARN, "%s: ddi_dma_unbind_handle failed",
1205 		    chp->ch_name);
1206 
1207 	mutex_enter(&chp->ch_dh_lck);
1208 	dhe->dhe_next = chp->ch_dh;
1209 	chp->ch_dh = dhe;
1210 	mutex_exit(&chp->ch_dh_lck);
1211 }
1212 
1213 #if defined(__sparc)
1214 /*
1215  * DVMA stuff. Solaris only.
1216  */
1217 
1218 /*
1219  * create a dvma handle and return a dma handle entry.
1220  * DVMA is on sparc only!
1221  */
1222 
1223 free_dh_t *
1224 ch_get_dvma_handle(ch_t *chp)
1225 {
1226 	ddi_dma_handle_t ch_dh;
1227 	ddi_dma_lim_t ch_dvma_attr;
1228 	free_dh_t *dhe;
1229 	int rv;
1230 
1231 	dhe = (free_dh_t *)kmem_zalloc(sizeof (*dhe), KM_SLEEP);
1232 
1233 	ch_dvma_attr.dlim_addr_lo = 0;
1234 	ch_dvma_attr.dlim_addr_hi = 0xffffffff;
1235 	ch_dvma_attr.dlim_cntr_max = 0xffffffff;
1236 	ch_dvma_attr.dlim_burstsizes = 0xfff;
1237 	ch_dvma_attr.dlim_minxfer = 1;
1238 	ch_dvma_attr.dlim_dmaspeed = 0;
1239 
1240 	rv = dvma_reserve(
1241 	    chp->ch_dip,		/* device dev_info */
1242 	    &ch_dvma_attr,		/* DVMA attributes */
1243 	    3,			/* number of pages */
1244 	    &ch_dh);		/* DVMA handle */
1245 
1246 	if (rv != DDI_SUCCESS) {
1247 
1248 		cmn_err(CE_WARN,
1249 		    "%s: ch_get_dvma_handle: dvma_reserve() error %d\n",
1250 		    chp->ch_name, rv);
1251 
1252 		kmem_free(dhe, sizeof (*dhe));
1253 
1254 		return ((free_dh_t *)0);
1255 	}
1256 
1257 	dhe->dhe_dh = (ulong_t)ch_dh;
1258 
1259 	return (dhe);
1260 }
1261 
1262 /*
1263  * free the linked list of dvma descriptor entries.
1264  * DVMA is only on sparc!
1265  */
1266 
1267 static void
1268 ch_free_dvma_handles(ch_t *chp)
1269 {
1270 	free_dh_t *dhe, *the;
1271 
1272 	dhe = chp->ch_vdh;
1273 	while (dhe) {
1274 		dvma_release((ddi_dma_handle_t)dhe->dhe_dh);
1275 		the = dhe;
1276 		dhe = dhe->dhe_next;
1277 		kmem_free(the, sizeof (*the));
1278 	}
1279 	chp->ch_vdh = NULL;
1280 }
1281 
1282 /*
1283  * ch_bind_dvma_handle()
1284  *
1285  * returns # of entries used off of cmdQ_ce_t array to hold physical addrs.
1286  * DVMA in sparc only
1287  *
1288  * chp - per-board descriptor
1289  * size - # bytes mapped
1290  * vaddr - virtual address
1291  * cmp - array of cmdQ_ce_t entries
1292  * cnt - # free entries in cmp array
1293  */
1294 
1295 uint32_t
1296 ch_bind_dvma_handle(ch_t *chp, int size, caddr_t vaddr, cmdQ_ce_t *cmp,
1297 	uint32_t cnt)
1298 {
1299 	ddi_dma_cookie_t cookie;
1300 	ddi_dma_handle_t ch_dh;
1301 	uint32_t n = 1;
1302 	free_dh_t *dhe;
1303 
1304 	mutex_enter(&chp->ch_dh_lck);
1305 	if ((dhe = chp->ch_vdh) != NULL) {
1306 		chp->ch_vdh = dhe->dhe_next;
1307 	}
1308 	mutex_exit(&chp->ch_dh_lck);
1309 
1310 	if (dhe == NULL) {
1311 		return (0);
1312 	}
1313 
1314 	ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1315 	n = cnt;
1316 
1317 	dvma_kaddr_load(
1318 	    ch_dh,		/* dvma handle */
1319 	    vaddr,		/* virtual address */
1320 	    size,		/* length of object */
1321 	    0,		/* start at index 0 */
1322 	    &cookie);
1323 
1324 	dvma_sync(ch_dh, 0, DDI_DMA_SYNC_FORDEV);
1325 
1326 	cookie.dmac_notused = 0;
1327 	n = 1;
1328 
1329 	cmp->ce_pa = cookie.dmac_laddress;
1330 	cmp->ce_dh = dhe;
1331 	cmp->ce_len = cookie.dmac_size;
1332 	cmp->ce_mp = NULL;
1333 	cmp->ce_flg = DH_DVMA;	/* indicate a dvma descriptor */
1334 
1335 	return (n);
1336 }
1337 
1338 /*
1339  * ch_unbind_dvma_handle()
1340  *
1341  * frees resources alloacted by ch_bind_dvma_handle().
1342  *
1343  * frees DMA handle
1344  */
1345 
1346 void
1347 ch_unbind_dvma_handle(ch_t *chp, free_dh_t *dhe)
1348 {
1349 	ddi_dma_handle_t ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1350 
1351 	dvma_unload(ch_dh, 0, -1);
1352 
1353 	mutex_enter(&chp->ch_dh_lck);
1354 	dhe->dhe_next = chp->ch_vdh;
1355 	chp->ch_vdh = dhe;
1356 	mutex_exit(&chp->ch_dh_lck);
1357 }
1358 
1359 #endif	/* defined(__sparc) */
1360 
1361 /*
1362  * send received packet up stream.
1363  *
1364  * if driver has been stopped, then we drop the message.
1365  */
1366 void
1367 ch_send_up(ch_t *chp, mblk_t *mp, uint32_t cksum, int flg)
1368 {
1369 	/*
1370 	 * probably do not need a lock here. When we set PESTOP in
1371 	 * ch_stop() a packet could have just passed here and gone
1372 	 * upstream. The next one will be dropped.
1373 	 */
1374 	if (chp->ch_state == PERUNNING) {
1375 		/*
1376 		 * note that flg will not be set unless enable_checksum_offload
1377 		 * set in /etc/system (see sge.c).
1378 		 */
1379 		if (flg)
1380 			(void) hcksum_assoc(mp, NULL, NULL, 0, 0, 0, cksum,
1381 			    HCK_FULLCKSUM, 0);
1382 		gld_recv(chp->ch_macp, mp);
1383 	} else {
1384 		freemsg(mp);
1385 	}
1386 }
1387 
1388 /*
1389  * unblock gld driver.
1390  */
1391 void
1392 ch_gld_ok(ch_t *chp)
1393 {
1394 	gld_sched(chp->ch_macp);
1395 }
1396 
1397 
1398 /*
1399  * reset the card.
1400  *
1401  * Note: we only do this after the card has been initialized.
1402  */
1403 static int
1404 ch_reset(gld_mac_info_t *mp)
1405 {
1406 	ch_t *chp;
1407 
1408 	if (mp == NULL) {
1409 		return (GLD_FAILURE);
1410 	}
1411 
1412 	chp = (ch_t *)mp->gldm_private;
1413 
1414 	if (chp == NULL) {
1415 		return (GLD_FAILURE);
1416 	}
1417 
1418 #ifdef NOTYET
1419 	/*
1420 	 * do a reset of card
1421 	 *
1422 	 * 1. set PwrState to D3hot (3)
1423 	 * 2. clear PwrState flags
1424 	 */
1425 	/*
1426 	 * When we did this, the card didn't start. First guess is that
1427 	 * the initialization is not quite correct. For now, we don't
1428 	 * reset things.
1429 	 */
1430 	if (chp->ch_hpci) {
1431 		pci_config_put32(chp->ch_hpci, 0x44, 3);
1432 		pci_config_put32(chp->ch_hpci, 0x44, 0);
1433 
1434 		/* delay .5 sec */
1435 		DELAY(500000);
1436 	}
1437 #endif
1438 
1439 	return (GLD_SUCCESS);
1440 }
1441 
1442 static int
1443 ch_start(gld_mac_info_t *macinfo)
1444 {
1445 	ch_t *chp = (ch_t *)macinfo->gldm_private;
1446 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
1447 	/* only initialize card on first attempt */
1448 	mutex_enter(&chp->ch_lock);
1449 	chp->ch_refcnt++;
1450 	if (chp->ch_refcnt == 1) {
1451 		chp->ch_state = PERUNNING;
1452 		mutex_exit(&chp->ch_lock);
1453 		pe_init((void *)chp);
1454 	} else
1455 		mutex_exit(&chp->ch_lock);
1456 #else
1457 	pe_init((void *)chp);
1458 
1459 	/* go to running state, we're being started */
1460 	mutex_enter(&chp->ch_lock);
1461 	chp->ch_state = PERUNNING;
1462 	mutex_exit(&chp->ch_lock);
1463 #endif
1464 
1465 	return (GLD_SUCCESS);
1466 }
1467 
1468 static int
1469 ch_stop(gld_mac_info_t *mp)
1470 {
1471 	ch_t *chp = (ch_t *)mp->gldm_private;
1472 
1473 	/*
1474 	 * can only stop the chip if it's been initialized
1475 	 */
1476 	mutex_enter(&chp->ch_lock);
1477 	if (chp->ch_state == PEIDLE) {
1478 		mutex_exit(&chp->ch_lock);
1479 		return (GLD_FAILURE);
1480 	}
1481 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
1482 	chp->ch_refcnt--;
1483 	if (chp->ch_refcnt == 0) {
1484 		chp->ch_state = PESTOP;
1485 		mutex_exit(&chp->ch_lock);
1486 		pe_stop(chp);
1487 	} else
1488 		mutex_exit(&chp->ch_lock);
1489 #else
1490 	chp->ch_state = PESTOP;
1491 	mutex_exit(&chp->ch_lock);
1492 	pe_stop(chp);
1493 #endif
1494 	return (GLD_SUCCESS);
1495 }
1496 
1497 static int
1498 ch_set_mac_address(gld_mac_info_t *mp, uint8_t *mac)
1499 {
1500 	ch_t *chp;
1501 
1502 	if (mp) {
1503 		chp = (ch_t *)mp->gldm_private;
1504 	} else {
1505 		return (GLD_FAILURE);
1506 	}
1507 
1508 	pe_set_mac(chp, mac);
1509 
1510 	return (GLD_SUCCESS);
1511 }
1512 
1513 static int
1514 ch_set_multicast(gld_mac_info_t *mp, uint8_t *ep, int flg)
1515 {
1516 	ch_t *chp = (ch_t *)mp->gldm_private;
1517 
1518 	return (pe_set_mc(chp, ep, flg));
1519 }
1520 
1521 static int
1522 ch_ioctl(gld_mac_info_t *macinfo, queue_t *q, mblk_t *mp)
1523 {
1524 	struct iocblk *iocp;
1525 
1526 	switch (mp->b_datap->db_type) {
1527 	case M_IOCTL:
1528 		/* pe_ioctl() does qreply() */
1529 		pe_ioctl((ch_t *)(macinfo->gldm_private), q, mp);
1530 		break;
1531 
1532 	default:
1533 /*
1534  *		cmn_err(CE_NOTE, "ch_ioctl not M_IOCTL\n");
1535  *		debug_enter("bad ch_ioctl");
1536  */
1537 
1538 		iocp = (struct iocblk *)mp->b_rptr;
1539 
1540 		if (mp->b_cont)
1541 			freemsg(mp->b_cont);
1542 		mp->b_cont = NULL;
1543 
1544 		mp->b_datap->db_type = M_IOCNAK;
1545 		iocp->ioc_error = EINVAL;
1546 		qreply(q, mp);
1547 		break;
1548 	}
1549 
1550 	return (GLD_SUCCESS);
1551 }
1552 
1553 static int
1554 ch_set_promiscuous(gld_mac_info_t *mp, int flag)
1555 {
1556 	ch_t *chp = (ch_t *)mp->gldm_private;
1557 
1558 	switch (flag) {
1559 	case GLD_MAC_PROMISC_MULTI:
1560 		pe_set_promiscuous(chp, 2);
1561 		break;
1562 
1563 	case GLD_MAC_PROMISC_NONE:
1564 		pe_set_promiscuous(chp, 0);
1565 		break;
1566 
1567 	case GLD_MAC_PROMISC_PHYS:
1568 	default:
1569 		pe_set_promiscuous(chp, 1);
1570 		break;
1571 	}
1572 
1573 	return (GLD_SUCCESS);
1574 }
1575 
1576 static int
1577 ch_get_stats(gld_mac_info_t *mp, struct gld_stats *gs)
1578 {
1579 	ch_t *chp = (ch_t *)mp->gldm_private;
1580 	uint64_t speed;
1581 	uint32_t intrcnt;
1582 	uint32_t norcvbuf;
1583 	uint32_t oerrors;
1584 	uint32_t ierrors;
1585 	uint32_t underrun;
1586 	uint32_t overrun;
1587 	uint32_t framing;
1588 	uint32_t crc;
1589 	uint32_t carrier;
1590 	uint32_t collisions;
1591 	uint32_t xcollisions;
1592 	uint32_t late;
1593 	uint32_t defer;
1594 	uint32_t xerrs;
1595 	uint32_t rerrs;
1596 	uint32_t toolong;
1597 	uint32_t runt;
1598 	ulong_t multixmt;
1599 	ulong_t multircv;
1600 	ulong_t brdcstxmt;
1601 	ulong_t brdcstrcv;
1602 
1603 	/*
1604 	 * race looks benign here.
1605 	 */
1606 	if (chp->ch_state != PERUNNING) {
1607 		return (GLD_FAILURE);
1608 	}
1609 
1610 	(void) pe_get_stats(chp,
1611 	    &speed,
1612 	    &intrcnt,
1613 	    &norcvbuf,
1614 	    &oerrors,
1615 	    &ierrors,
1616 	    &underrun,
1617 	    &overrun,
1618 	    &framing,
1619 	    &crc,
1620 	    &carrier,
1621 	    &collisions,
1622 	    &xcollisions,
1623 	    &late,
1624 	    &defer,
1625 	    &xerrs,
1626 	    &rerrs,
1627 	    &toolong,
1628 	    &runt,
1629 	    &multixmt,
1630 	    &multircv,
1631 	    &brdcstxmt,
1632 	    &brdcstrcv);
1633 
1634 	gs->glds_speed = speed;
1635 	gs->glds_media = GLDM_UNKNOWN;
1636 	gs->glds_intr  = intrcnt;
1637 	gs->glds_norcvbuf = norcvbuf;
1638 	gs->glds_errxmt = oerrors;
1639 	gs->glds_errrcv = ierrors;
1640 	gs->glds_missed = ierrors;	/* ??? */
1641 	gs->glds_underflow = underrun;
1642 	gs->glds_overflow = overrun;
1643 	gs->glds_frame = framing;
1644 	gs->glds_crc = crc;
1645 	gs->glds_duplex = GLD_DUPLEX_FULL;
1646 	gs->glds_nocarrier = carrier;
1647 	gs->glds_collisions = collisions;
1648 	gs->glds_excoll = xcollisions;
1649 	gs->glds_xmtlatecoll = late;
1650 	gs->glds_defer = defer;
1651 	gs->glds_dot3_first_coll = 0;	/* Not available */
1652 	gs->glds_dot3_multi_coll = 0;	/* Not available */
1653 	gs->glds_dot3_sqe_error = 0;	/* Not available */
1654 	gs->glds_dot3_mac_xmt_error = xerrs;
1655 	gs->glds_dot3_mac_rcv_error = rerrs;
1656 	gs->glds_dot3_frame_too_long = toolong;
1657 	gs->glds_short = runt;
1658 
1659 	gs->glds_noxmtbuf = 0;		/* not documented */
1660 	gs->glds_xmtretry = 0;		/* not documented */
1661 	gs->glds_multixmt = multixmt;	/* not documented */
1662 	gs->glds_multircv = multircv;	/* not documented */
1663 	gs->glds_brdcstxmt = brdcstxmt;	/* not documented */
1664 	gs->glds_brdcstrcv = brdcstrcv;	/* not documented */
1665 
1666 	return (GLD_SUCCESS);
1667 }
1668 
1669 
1670 static int
1671 ch_send(gld_mac_info_t *macinfo, mblk_t *mp)
1672 {
1673 	ch_t *chp = (ch_t *)macinfo->gldm_private;
1674 	uint32_t flg;
1675 	uint32_t msg_flg;
1676 
1677 #ifdef TX_CKSUM_FIX
1678 	mblk_t *nmp;
1679 	int frags;
1680 	size_t msg_len;
1681 	struct ether_header *ehdr;
1682 	ipha_t *ihdr;
1683 	int tflg = 0;
1684 #endif	/* TX_CKSUM_FIX */
1685 
1686 	/*
1687 	 * race looks benign here.
1688 	 */
1689 	if (chp->ch_state != PERUNNING) {
1690 		return (GLD_FAILURE);
1691 	}
1692 
1693 	msg_flg = 0;
1694 	if (chp->ch_config.cksum_enabled) {
1695 		if (is_T2(chp)) {
1696 			hcksum_retrieve(mp, NULL, NULL, NULL, NULL, NULL,
1697 			    NULL, &msg_flg);
1698 			flg = (msg_flg & HCK_FULLCKSUM)?
1699 			    CH_NO_CPL: CH_NO_HWCKSUM|CH_NO_CPL;
1700 		} else
1701 			flg = CH_NO_CPL;
1702 	} else
1703 	flg = CH_NO_HWCKSUM | CH_NO_CPL;
1704 
1705 #ifdef TX_CKSUM_FIX
1706 	/*
1707 	 * Check if the message spans more than one mblk or
1708 	 * if it does and the ip header is not in the first
1709 	 * fragment then pull up the message. This case is
1710 	 * expected to be rare.
1711 	 */
1712 	frags = 0;
1713 	msg_len = 0;
1714 	nmp = mp;
1715 	do {
1716 		frags++;
1717 		msg_len += MBLKL(nmp);
1718 		nmp = nmp->b_cont;
1719 	} while (nmp);
1720 #define	MAX_ALL_HDRLEN SZ_CPL_TX_PKT + sizeof (struct ether_header) + \
1721 				TCP_MAX_COMBINED_HEADER_LENGTH
1722 	/*
1723 	 * If the first mblk has enough space at the beginning of
1724 	 * the data buffer to hold a CPL header, then, we'll expancd
1725 	 * the front of the buffer so a pullup will leave space for
1726 	 * pe_start() to add the CPL header in line. We need to remember
1727 	 * that we've done this so we can undo it after the pullup.
1728 	 *
1729 	 * Note that if we decide to do an allocb to hold the CPL header,
1730 	 * we need to catch the case where we've added an empty mblk for
1731 	 * the header but never did a pullup. This would result in the
1732 	 * tests for etherheader, etc. being done on the initial, empty,
1733 	 * mblk instead of the one with data. See PR3646 for further
1734 	 * details. (note this PR is closed since it is no longer relevant).
1735 	 *
1736 	 * Another point is that if we do add an allocb to add space for
1737 	 * a CPL header, after a pullup, the initial pointer, mp, in GLD will
1738 	 * no longer point to a valid mblk. When we get the mblk (by allocb),
1739 	 * we need to switch the mblk structure values between it and the
1740 	 * mp structure values referenced by GLD. This handles the case where
1741 	 * we've run out of cmdQ entries and report GLD_NORESOURCES back to
1742 	 * GLD. The pointer to the mblk data will have been modified to hold
1743 	 * an empty 8 bytes for the CPL header, For now, we let the pe_start()
1744 	 * routine prepend an 8 byte mblk.
1745 	 */
1746 	if (MBLKHEAD(mp) >= SZ_CPL_TX_PKT) {
1747 		mp->b_rptr -= SZ_CPL_TX_PKT;
1748 		tflg = 1;
1749 	}
1750 	if (frags > 3) {
1751 		chp->sge->intr_cnt.tx_msg_pullups++;
1752 		if (pullupmsg(mp, -1) == 0) {
1753 			freemsg(mp);
1754 			return (GLD_SUCCESS);
1755 		}
1756 	} else if ((msg_len > MAX_ALL_HDRLEN) &&
1757 	    (MBLKL(mp) < MAX_ALL_HDRLEN)) {
1758 		chp->sge->intr_cnt.tx_hdr_pullups++;
1759 		if (pullupmsg(mp, MAX_ALL_HDRLEN) == 0) {
1760 			freemsg(mp);
1761 			return (GLD_SUCCESS);
1762 		}
1763 	}
1764 	if (tflg)
1765 		mp->b_rptr += SZ_CPL_TX_PKT;
1766 
1767 	ehdr = (struct ether_header *)mp->b_rptr;
1768 	if (ehdr->ether_type == htons(ETHERTYPE_IP)) {
1769 		ihdr = (ipha_t *)&mp->b_rptr[sizeof (struct ether_header)];
1770 		if ((ihdr->ipha_fragment_offset_and_flags & IPH_MF)) {
1771 			if (ihdr->ipha_protocol == IPPROTO_UDP) {
1772 				flg |= CH_UDP_MF;
1773 				chp->sge->intr_cnt.tx_udp_ip_frag++;
1774 			} else if (ihdr->ipha_protocol == IPPROTO_TCP) {
1775 				flg |= CH_TCP_MF;
1776 				chp->sge->intr_cnt.tx_tcp_ip_frag++;
1777 			}
1778 		} else if (ihdr->ipha_protocol == IPPROTO_UDP)
1779 			flg |= CH_UDP;
1780 	}
1781 #endif	/* TX_CKSUM_FIX */
1782 
1783 	/*
1784 	 * return 0 - data send successfully
1785 	 * return 1 - no resources, reschedule
1786 	 */
1787 	if (pe_start(chp, mp, flg))
1788 		return (GLD_NORESOURCES);
1789 	else
1790 		return (GLD_SUCCESS);
1791 }
1792 
1793 static uint_t
1794 ch_intr(gld_mac_info_t *mp)
1795 {
1796 	return (pe_intr((ch_t *)mp->gldm_private));
1797 }
1798 
1799 /*
1800  * generate name of driver with unit# postpended.
1801  */
1802 void
1803 ch_set_name(ch_t *chp, int unit)
1804 {
1805 	chp->ch_name = (char *)kmem_alloc(sizeof ("chxge00"), KM_SLEEP);
1806 	if (unit > 9) {
1807 		bcopy("chxge00", (void *)chp->ch_name, sizeof ("chxge00"));
1808 		chp->ch_name[5] += unit/10;
1809 		chp->ch_name[6] += unit%10;
1810 	} else {
1811 		bcopy("chxge0", (void *)chp->ch_name, sizeof ("chxge0"));
1812 		chp->ch_name[5] += unit;
1813 	}
1814 }
1815 
1816 void
1817 ch_free_name(ch_t *chp)
1818 {
1819 	if (chp->ch_name)
1820 		kmem_free(chp->ch_name, sizeof ("chxge00"));
1821 	chp->ch_name = NULL;
1822 }
1823 
1824 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
1825 /*
1826  * register toe offload.
1827  */
1828 void *
1829 ch_register(void *instp, void *toe_rcv, void *toe_free, void *toe_tunnel,
1830     kmutex_t *toe_tx_mx, kcondvar_t *toe_of_cv, int unit)
1831 {
1832 	ch_t *chp = gchp[unit];
1833 	if (chp != NULL) {
1834 		mutex_enter(&chp->ch_lock);
1835 
1836 		chp->toe_rcv = (void (*)(void *, mblk_t *))toe_rcv;
1837 		chp->ch_toeinst = instp;
1838 		chp->toe_free = (void (*)(void *, tbuf_t *))toe_free;
1839 		chp->toe_tunnel = (int (*)(void *, mblk_t *))toe_tunnel;
1840 		chp->ch_tx_overflow_mutex = toe_tx_mx;
1841 		chp->ch_tx_overflow_cv = toe_of_cv;
1842 		chp->open_device_map |= TOEDEV_DEVMAP_BIT;
1843 
1844 		/* start up adapter if first user */
1845 		chp->ch_refcnt++;
1846 		if (chp->ch_refcnt == 1) {
1847 			chp->ch_state = PERUNNING;
1848 			mutex_exit(&chp->ch_lock);
1849 			pe_init((void *)chp);
1850 		} else
1851 			mutex_exit(&chp->ch_lock);
1852 	}
1853 	return ((void *)gchp[unit]);
1854 }
1855 
1856 /*
1857  * unregister toe offload.
1858  * XXX Need to fix races here.
1859  *     1. turn off SGE interrupts.
1860  *     2. do update
1861  *     3. re-enable SGE interrupts
1862  *     4. SGE doorbell to make sure things get restarted.
1863  */
1864 void
1865 ch_unregister(void)
1866 {
1867 	int i;
1868 	ch_t *chp;
1869 
1870 	for (i = 0; i < MAX_CARDS; i++) {
1871 		chp = gchp[i];
1872 		if (chp == NULL)
1873 			continue;
1874 
1875 		mutex_enter(&chp->ch_lock);
1876 
1877 		chp->ch_refcnt--;
1878 		if (chp->ch_refcnt == 0) {
1879 			chp->ch_state = PESTOP;
1880 			mutex_exit(&chp->ch_lock);
1881 			pe_stop(chp);
1882 		} else
1883 			mutex_exit(&chp->ch_lock);
1884 
1885 		chp->open_device_map &= ~TOEDEV_DEVMAP_BIT;
1886 		chp->toe_rcv = NULL;
1887 		chp->ch_toeinst =  NULL;
1888 		chp->toe_free = NULL;
1889 		chp->toe_tunnel = NULL;
1890 		chp->ch_tx_overflow_mutex = NULL;
1891 		chp->ch_tx_overflow_cv = NULL;
1892 	}
1893 }
1894 #endif	/* CONFIG_CHELSIO_T1_OFFLOAD */
1895 
1896 /*
1897  * get properties from chxge.conf
1898  */
1899 static void
1900 ch_get_prop(ch_t *chp)
1901 {
1902 	int val;
1903 	int tval = 0;
1904 	extern int enable_latency_timer;
1905 	extern uint32_t sge_cmdq0_cnt;
1906 	extern uint32_t sge_cmdq1_cnt;
1907 	extern uint32_t sge_flq0_cnt;
1908 	extern uint32_t sge_flq1_cnt;
1909 	extern uint32_t sge_respq_cnt;
1910 	extern uint32_t sge_cmdq0_cnt_orig;
1911 	extern uint32_t sge_cmdq1_cnt_orig;
1912 	extern uint32_t sge_flq0_cnt_orig;
1913 	extern uint32_t sge_flq1_cnt_orig;
1914 	extern uint32_t sge_respq_cnt_orig;
1915 	dev_info_t *pdip;
1916 	uint32_t vendor_id, device_id, revision_id;
1917 	uint32_t *prop_val = NULL;
1918 	uint32_t prop_len = NULL;
1919 
1920 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1921 	    "enable_dvma", -1);
1922 	if (val == -1)
1923 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1924 		    "enable-dvma", -1);
1925 	if (val != -1) {
1926 		if (val != 0)
1927 			chp->ch_config.enable_dvma = 1;
1928 	}
1929 
1930 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1931 	    "amd_bug_workaround", -1);
1932 	if (val == -1)
1933 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1934 		    "amd-bug-workaround", -1);
1935 
1936 	if (val != -1) {
1937 		if (val == 0) {
1938 			chp->ch_config.burstsize_set = 0;
1939 			chp->ch_config.transaction_cnt_set = 0;
1940 			goto fail_exit;
1941 		}
1942 	}
1943 	/*
1944 	 * Step up to the parent node,  That's the node above us
1945 	 * in the device tree. And will typically be the PCI host
1946 	 * Controller.
1947 	 */
1948 	pdip = ddi_get_parent(chp->ch_dip);
1949 
1950 	/*
1951 	 * Now get the 'Vendor id' properties
1952 	 */
1953 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, pdip, 0, "vendor-id",
1954 	    (int **)&prop_val, &prop_len) != DDI_PROP_SUCCESS) {
1955 		chp->ch_config.burstsize_set = 0;
1956 		chp->ch_config.transaction_cnt_set = 0;
1957 		goto fail_exit;
1958 	}
1959 	vendor_id = *(uint32_t *)prop_val;
1960 	ddi_prop_free(prop_val);
1961 
1962 	/*
1963 	 * Now get the 'Device id' properties
1964 	 */
1965 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, pdip, 0, "device-id",
1966 	    (int **)&prop_val, &prop_len) != DDI_PROP_SUCCESS) {
1967 		chp->ch_config.burstsize_set = 0;
1968 		chp->ch_config.transaction_cnt_set = 0;
1969 		goto fail_exit;
1970 	}
1971 	device_id = *(uint32_t *)prop_val;
1972 	ddi_prop_free(prop_val);
1973 
1974 	/*
1975 	 * Now get the 'Revision id' properties
1976 	 */
1977 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, pdip, 0, "revision-id",
1978 	    (int **)&prop_val, &prop_len) != DDI_PROP_SUCCESS) {
1979 		chp->ch_config.burstsize_set = 0;
1980 		chp->ch_config.transaction_cnt_set = 0;
1981 		goto fail_exit;
1982 	}
1983 	revision_id = *(uint32_t *)prop_val;
1984 	ddi_prop_free(prop_val);
1985 
1986 	/*
1987 	 * set default values based on node above us.
1988 	 */
1989 	if ((vendor_id == AMD_VENDOR_ID) && (device_id == AMD_BRIDGE) &&
1990 	    (revision_id <= AMD_BRIDGE_REV)) {
1991 		uint32_t v;
1992 		uint32_t burst;
1993 		uint32_t cnt;
1994 
1995 		/* if 133 Mhz not enabled, then do nothing - we're not PCIx */
1996 		v = pci_config_get32(chp->ch_hpci, 0x64);
1997 		if ((v & 0x20000) == NULL) {
1998 			chp->ch_config.burstsize_set = 0;
1999 			chp->ch_config.transaction_cnt_set = 0;
2000 			goto fail_exit;
2001 		}
2002 
2003 		/* check burst size and transaction count */
2004 		v = pci_config_get32(chp->ch_hpci, 0x60);
2005 		burst = (v >> 18) & 3;
2006 		cnt = (v >> 20) & 7;
2007 
2008 		switch (burst) {
2009 		case 0:	/* 512 */
2010 			/* 512 burst size legal with split cnts 1,2,3 */
2011 			if (cnt <= 2) {
2012 				chp->ch_config.burstsize_set = 0;
2013 				chp->ch_config.transaction_cnt_set = 0;
2014 				goto fail_exit;
2015 			}
2016 			break;
2017 		case 1:	/* 1024 */
2018 			/* 1024 burst size legal with split cnts 1,2 */
2019 			if (cnt <= 1) {
2020 				chp->ch_config.burstsize_set = 0;
2021 				chp->ch_config.transaction_cnt_set = 0;
2022 				goto fail_exit;
2023 			}
2024 			break;
2025 		case 2:	/* 2048 */
2026 			/* 2048 burst size legal with split cnts 1 */
2027 			if (cnt == 0) {
2028 				chp->ch_config.burstsize_set = 0;
2029 				chp->ch_config.transaction_cnt_set = 0;
2030 				goto fail_exit;
2031 			}
2032 			break;
2033 		case 3:	/* 4096 */
2034 			break;
2035 		}
2036 	} else {
2037 		goto fail_exit;
2038 	}
2039 
2040 	/*
2041 	 * if illegal burst size seen, then default to 1024 burst size
2042 	 */
2043 	chp->ch_config.burstsize = 1;
2044 	chp->ch_config.burstsize_set = 1;
2045 	/*
2046 	 * if illegal transaction cnt seen, then default to 2
2047 	 */
2048 	chp->ch_config.transaction_cnt = 1;
2049 	chp->ch_config.transaction_cnt_set = 1;
2050 
2051 
2052 fail_exit:
2053 
2054 	/*
2055 	 * alter the burstsize parameter via an entry
2056 	 * in chxge.conf
2057 	 */
2058 
2059 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2060 	    "pci_burstsize", -1);
2061 	if (val == -1)
2062 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2063 		    "pci-burstsize", -1);
2064 
2065 	if (val != -1) {
2066 
2067 		switch (val) {
2068 		case 0:	/* use default */
2069 			chp->ch_config.burstsize_set = 0;
2070 			break;
2071 
2072 		case 1024:
2073 			chp->ch_config.burstsize_set = 1;
2074 			chp->ch_config.burstsize = 1;
2075 			break;
2076 
2077 		case 2048:
2078 			chp->ch_config.burstsize_set = 1;
2079 			chp->ch_config.burstsize = 2;
2080 			break;
2081 
2082 		case 4096:
2083 			cmn_err(CE_WARN, "%s not supported %d\n",
2084 			    chp->ch_name, val);
2085 			break;
2086 
2087 		default:
2088 			cmn_err(CE_WARN, "%s illegal burst size %d\n",
2089 			    chp->ch_name, val);
2090 			break;
2091 		}
2092 	}
2093 
2094 	/*
2095 	 * set transaction count
2096 	 */
2097 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2098 	    "pci_split_transaction_cnt", -1);
2099 	if (val == -1)
2100 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2101 		    "pci-split-transaction-cnt", -1);
2102 
2103 	if (val != -1) {
2104 		switch (val) {
2105 		case 0:	/* use default */
2106 			chp->ch_config.transaction_cnt_set = 0;
2107 			break;
2108 
2109 		case 1:
2110 			chp->ch_config.transaction_cnt_set = 1;
2111 			chp->ch_config.transaction_cnt = 0;
2112 			break;
2113 
2114 		case 2:
2115 			chp->ch_config.transaction_cnt_set = 1;
2116 			chp->ch_config.transaction_cnt = 1;
2117 			break;
2118 
2119 		case 3:
2120 			chp->ch_config.transaction_cnt_set = 1;
2121 			chp->ch_config.transaction_cnt = 2;
2122 			break;
2123 
2124 		case 4:
2125 			chp->ch_config.transaction_cnt_set = 1;
2126 			chp->ch_config.transaction_cnt = 3;
2127 			break;
2128 
2129 		case 8:
2130 			chp->ch_config.transaction_cnt_set = 1;
2131 			chp->ch_config.transaction_cnt = 4;
2132 			break;
2133 
2134 		case 12:
2135 			chp->ch_config.transaction_cnt_set = 1;
2136 			chp->ch_config.transaction_cnt = 5;
2137 			break;
2138 
2139 		case 16:
2140 			chp->ch_config.transaction_cnt_set = 1;
2141 			chp->ch_config.transaction_cnt = 6;
2142 			break;
2143 
2144 		case 32:
2145 			chp->ch_config.transaction_cnt_set = 1;
2146 			chp->ch_config.transaction_cnt = 7;
2147 			break;
2148 
2149 		default:
2150 			cmn_err(CE_WARN, "%s illegal transaction cnt %d\n",
2151 			    chp->ch_name, val);
2152 			break;
2153 		}
2154 	}
2155 
2156 	/*
2157 	 * set relaxed ordering bit?
2158 	 */
2159 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2160 	    "pci_relaxed_ordering_on", -1);
2161 	if (val == -1)
2162 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2163 		    "pci-relaxed-ordering-on", -1);
2164 
2165 	/*
2166 	 * default is to use system default value.
2167 	 */
2168 	chp->ch_config.relaxed_ordering = 0;
2169 
2170 	if (val != -1) {
2171 		if (val)
2172 			chp->ch_config.relaxed_ordering = 1;
2173 	}
2174 
2175 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2176 	    "enable_latency_timer", -1);
2177 	if (val == -1)
2178 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2179 		    "enable-latency-timer", -1);
2180 	if (val != -1)
2181 		enable_latency_timer = (val == 0)? 0: 1;
2182 
2183 	/*
2184 	 * default maximum Jumbo Frame size.
2185 	 */
2186 	chp->ch_maximum_mtu = 9198;	/* tunable via chxge.conf */
2187 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2188 	    "maximum_mtu", -1);
2189 	if (val == -1) {
2190 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2191 		    "maximum-mtu", -1);
2192 	}
2193 	if (val != -1) {
2194 		if (val > 9582) {
2195 			cmn_err(CE_WARN,
2196 			    "maximum_mtu value %d > 9582. Value set to 9582",
2197 			    val);
2198 			val = 9582;
2199 		} else if (val < 1500) {
2200 			cmn_err(CE_WARN,
2201 			    "maximum_mtu value %d < 1500. Value set to 1500",
2202 			    val);
2203 			val = 1500;
2204 		}
2205 
2206 		if (val)
2207 			chp->ch_maximum_mtu = val;
2208 	}
2209 
2210 	/*
2211 	 * default value for this instance mtu
2212 	 */
2213 	chp->ch_mtu = ETHERMTU;
2214 
2215 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2216 	    "accept_jumbo", -1);
2217 	if (val == -1) {
2218 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2219 		    "accept-jumbo", -1);
2220 	}
2221 	if (val != -1) {
2222 		if (val)
2223 			chp->ch_mtu = chp->ch_maximum_mtu;
2224 	}
2225 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
2226 	chp->ch_sm_buf_sz = 0x800;
2227 	chp->ch_sm_buf_aln = 0x800;
2228 	chp->ch_bg_buf_sz = 0x4000;
2229 	chp->ch_bg_buf_aln = 0x4000;
2230 #else
2231 	chp->ch_sm_buf_sz = 0x200;
2232 	chp->ch_sm_buf_aln = 0x200;
2233 	chp->ch_bg_buf_sz = 0x800;
2234 	chp->ch_bg_buf_aln = 0x800;
2235 	if ((chp->ch_mtu > 0x800) && (chp->ch_mtu <= 0x1000)) {
2236 		chp->ch_sm_buf_sz = 0x400;
2237 		chp->ch_sm_buf_aln = 0x400;
2238 		chp->ch_bg_buf_sz = 0x1000;
2239 		chp->ch_bg_buf_aln = 0x1000;
2240 	} else if ((chp->ch_mtu > 0x1000) && (chp->ch_mtu <= 0x2000)) {
2241 		chp->ch_sm_buf_sz = 0x400;
2242 		chp->ch_sm_buf_aln = 0x400;
2243 		chp->ch_bg_buf_sz = 0x2000;
2244 		chp->ch_bg_buf_aln = 0x2000;
2245 	} else if (chp->ch_mtu > 0x2000) {
2246 		chp->ch_sm_buf_sz = 0x400;
2247 		chp->ch_sm_buf_aln = 0x400;
2248 		chp->ch_bg_buf_sz = 0x3000;
2249 		chp->ch_bg_buf_aln = 0x4000;
2250 	}
2251 #endif
2252 	chp->ch_config.cksum_enabled = 1;
2253 
2254 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2255 	    "enable_checksum_offload", -1);
2256 	if (val == -1)
2257 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2258 		    "enable-checksum-offload", -1);
2259 	if (val != -1) {
2260 		if (val == NULL)
2261 			chp->ch_config.cksum_enabled = 0;
2262 	}
2263 
2264 	/*
2265 	 * Provides a tuning capability for the command queue 0 size.
2266 	 */
2267 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2268 	    "sge_cmdq0_cnt", -1);
2269 	if (val == -1)
2270 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2271 		    "sge-cmdq0-cnt", -1);
2272 	if (val != -1) {
2273 		if (val > 10)
2274 			sge_cmdq0_cnt = val;
2275 	}
2276 
2277 	if (sge_cmdq0_cnt > 65535) {
2278 		cmn_err(CE_WARN,
2279 		    "%s: sge-cmdQ0-cnt > 65535 - resetting value to default",
2280 		    chp->ch_name);
2281 		sge_cmdq0_cnt = sge_cmdq0_cnt_orig;
2282 	}
2283 	tval += sge_cmdq0_cnt;
2284 
2285 	/*
2286 	 * Provides a tuning capability for the command queue 1 size.
2287 	 */
2288 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2289 	    "sge_cmdq1_cnt", -1);
2290 	if (val == -1)
2291 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2292 		    "sge-cmdq1-cnt", -1);
2293 	if (val != -1) {
2294 		if (val > 10)
2295 			sge_cmdq1_cnt = val;
2296 	}
2297 
2298 	if (sge_cmdq1_cnt > 65535) {
2299 		cmn_err(CE_WARN,
2300 		    "%s: sge-cmdQ0-cnt > 65535 - resetting value to default",
2301 		    chp->ch_name);
2302 		sge_cmdq1_cnt = sge_cmdq1_cnt_orig;
2303 	}
2304 
2305 	/*
2306 	 * Provides a tuning capability for the free list 0 size.
2307 	 */
2308 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2309 	    "sge_flq0_cnt", -1);
2310 	if (val == -1)
2311 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2312 		    "sge-flq0-cnt", -1);
2313 	if (val != -1) {
2314 		if (val > 512)
2315 			sge_flq0_cnt = val;
2316 	}
2317 
2318 	if (sge_flq0_cnt > 65535) {
2319 		cmn_err(CE_WARN,
2320 		    "%s: sge-flq0-cnt > 65535 - resetting value to default",
2321 		    chp->ch_name);
2322 		sge_flq0_cnt = sge_flq0_cnt_orig;
2323 	}
2324 
2325 	tval += sge_flq0_cnt;
2326 
2327 	/*
2328 	 * Provides a tuning capability for the free list 1 size.
2329 	 */
2330 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2331 	    "sge_flq1_cnt", -1);
2332 	if (val == -1)
2333 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2334 		    "sge-flq1-cnt", -1);
2335 	if (val != -1) {
2336 		if (val > 512)
2337 			sge_flq1_cnt = val;
2338 	}
2339 
2340 	if (sge_flq1_cnt > 65535) {
2341 		cmn_err(CE_WARN,
2342 		    "%s: sge-flq1-cnt > 65535 - resetting value to default",
2343 		    chp->ch_name);
2344 		sge_flq1_cnt = sge_flq1_cnt_orig;
2345 	}
2346 
2347 	tval += sge_flq1_cnt;
2348 
2349 	/*
2350 	 * Provides a tuning capability for the responce queue size.
2351 	 */
2352 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2353 	    "sge_respq_cnt", -1);
2354 	if (val == -1)
2355 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2356 		    "sge-respq-cnt", -1);
2357 	if (val != -1) {
2358 		if (val > 30)
2359 			sge_respq_cnt = val;
2360 	}
2361 
2362 	if (sge_respq_cnt > 65535) {
2363 		cmn_err(CE_WARN,
2364 		    "%s: sge-respq-cnt > 65535 - resetting value to default",
2365 		    chp->ch_name);
2366 		sge_respq_cnt = sge_respq_cnt_orig;
2367 	}
2368 
2369 	if (tval > sge_respq_cnt) {
2370 		if (tval <= 65535) {
2371 			cmn_err(CE_WARN,
2372 	    "%s: sge-respq-cnt < %d - setting value to %d (cmdQ+flq0+flq1)",
2373 			    chp->ch_name, tval, tval);
2374 
2375 			sge_respq_cnt = tval;
2376 		} else {
2377 			cmn_err(CE_WARN,
2378 			    "%s: Q sizes invalid - resetting to default values",
2379 			    chp->ch_name);
2380 
2381 			sge_cmdq0_cnt = sge_cmdq0_cnt_orig;
2382 			sge_cmdq1_cnt = sge_cmdq1_cnt_orig;
2383 			sge_flq0_cnt = sge_flq0_cnt_orig;
2384 			sge_flq1_cnt = sge_flq1_cnt_orig;
2385 			sge_respq_cnt = sge_respq_cnt_orig;
2386 		}
2387 	}
2388 }
2389