1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 /* 26 * Copyright (c) * Copyright (c) 2001 Tadpole Technology plc 27 * All rights reserved. 28 * From "@(#)pcicfg.c 1.31 99/06/18 SMI" 29 */ 30 31 #pragma ident "%Z%%M% %I% %E% SMI" 32 33 /* 34 * Cardbus configurator 35 */ 36 37 #include <sys/ddi.h> 38 #include <sys/sunndi.h> 39 #include <sys/ndi_impldefs.h> 40 41 #include <sys/pci.h> 42 #include <sys/ebus.h> 43 #include <sys/hotplug/hpctrl.h> 44 #include <sys/hotplug/pci/pcicfg.h> 45 46 #include <sys/pctypes.h> 47 #include <sys/pcmcia.h> 48 #include <sys/sservice.h> 49 50 #include <sys/isa_defs.h> 51 52 #include <sys/note.h> 53 54 #include <sys/ethernet.h> 55 56 #include "cardbus.h" 57 #include "cardbus_parse.h" 58 #include "cardbus_cfg.h" 59 60 /* 61 * ************************************************************************ 62 * *** Implementation specific local data structures/definitions. *** 63 * ************************************************************************ 64 */ 65 66 #define PCICFG_MAX_DEVICE 32 67 #define PCICFG_MAX_FUNCTION 8 68 69 static uint32_t pcicfg_max_device = PCICFG_MAX_DEVICE; 70 static uint32_t pcicfg_max_function = PCICFG_MAX_FUNCTION; 71 72 #define PCICFG_NODEVICE 42 73 #define PCICFG_NOMEMORY 43 74 #define PCICFG_NOMULTI 44 75 76 #define PCICFG_HIADDR(n) ((uint32_t)(((uint64_t)(n) & 0xFFFFFFFF00000000)>> 32)) 77 #define PCICFG_LOADDR(n) ((uint32_t)((uint64_t)(n) & 0x00000000FFFFFFFF)) 78 #define PCICFG_LADDR(lo, hi) (((uint64_t)(hi) << 32) | (uint32_t)(lo)) 79 80 #define PCICFG_HIWORD(n) ((uint16_t)(((uint32_t)(n) & 0xFFFF0000)>> 16)) 81 #define PCICFG_LOWORD(n) ((uint16_t)((uint32_t)(n) & 0x0000FFFF)) 82 #define PCICFG_HIBYTE(n) ((uint8_t)(((uint16_t)(n) & 0xFF00)>> 8)) 83 #define PCICFG_LOBYTE(n) ((uint8_t)((uint16_t)(n) & 0x00FF)) 84 85 #define PCICFG_ROUND_UP(addr, gran) ((uintptr_t)((gran+addr-1)&(~(gran-1)))) 86 #define PCICFG_ROUND_DOWN(addr, gran) ((uintptr_t)((addr) & ~(gran-1))) 87 88 #define PCICFG_MEMGRAN 0x100000 89 #define PCICFG_IOGRAN 0x1000 90 #define PCICFG_4GIG_LIMIT 0xFFFFFFFFUL 91 #define CBCFG_MEMGRAN 0x1000 92 #define CBCFG_IOGRAN 0x4 93 94 #define PCICFG_MEM_MULT 4 95 #define PCICFG_IO_MULT 4 96 #define PCICFG_RANGE_LEN 2 /* Number of range entries */ 97 98 /* 99 * ISA node declaration structure. 100 */ 101 struct isa_node { 102 char *name; 103 char *compatible[5]; 104 char *type; 105 char *model; 106 uint16_t reg; 107 uint16_t span; 108 }; 109 110 struct cardbus_name_entry { 111 uint32_t class_code; 112 char *name; 113 int pil; 114 }; 115 116 struct cardbus_find_ctrl { 117 uint_t bus; 118 uint_t device; 119 uint_t function; 120 dev_info_t *dip; 121 }; 122 123 #define PCICFG_MAKE_REG_HIGH(busnum, devnum, funcnum, register)\ 124 (\ 125 ((ulong_t)(busnum & 0xff) << 16) |\ 126 ((ulong_t)(devnum & 0x1f) << 11) |\ 127 ((ulong_t)(funcnum & 0x7) << 8) |\ 128 ((ulong_t)(register & 0x3f))) 129 130 typedef struct cardbus_phdl cardbus_phdl_t; 131 132 struct cardbus_phdl { 133 134 dev_info_t *dip; /* Associated with the attach point */ 135 dev_info_t *res_dip; /* dip from which io/mem is allocated */ 136 cardbus_phdl_t *next; 137 138 uint64_t memory_base; /* Memory base for this attach point */ 139 uint64_t memory_last; 140 uint64_t memory_len; 141 uint32_t memory_gran; 142 uint32_t io_base; /* I/O base for this attach point */ 143 uint32_t io_last; 144 uint32_t io_len; 145 uint32_t io_gran; 146 147 int error; 148 uint_t highest_bus; /* Highest bus seen on the probe */ 149 ndi_ra_request_t mem_req; /* allocator request for memory */ 150 ndi_ra_request_t io_req; /* allocator request for I/O */ 151 }; 152 153 typedef struct { 154 dev_info_t *dip; /* Associated with the attach point */ 155 ddi_acc_handle_t handle; /* open handle on parent PCI config space */ 156 uint32_t io_base; /* I/O base for this attach point */ 157 int io_decode_reg; 158 } isa_phdl_t; 159 160 161 /* 162 * forward declarations for routines defined in this module (called here) 163 */ 164 static cardbus_phdl_t *cardbus_find_phdl(dev_info_t *dip); 165 static cardbus_phdl_t *cardbus_create_phdl(dev_info_t *dip); 166 static int cardbus_destroy_phdl(dev_info_t *dip); 167 static int cardbus_program_ap(dev_info_t *); 168 static void cardbus_topbridge_assign(dev_info_t *, cardbus_phdl_t *); 169 static int cardbus_bridge_ranges(dev_info_t *, cardbus_phdl_t *, 170 ddi_acc_handle_t); 171 static int cardbus_bridge_assign(dev_info_t *, void *); 172 static int cardbus_isa_bridge_ranges(dev_info_t *dip, cardbus_phdl_t *entry, 173 ddi_acc_handle_t handle); 174 static int cardbus_add_isa_reg(dev_info_t *, void *); 175 static int cardbus_allocate_chunk(dev_info_t *, uint8_t, uint8_t); 176 static int cardbus_free_chunk(dev_info_t *); 177 static void cardbus_setup_bridge(dev_info_t *, cardbus_phdl_t *, 178 ddi_acc_handle_t); 179 static void cardbus_update_bridge(dev_info_t *, cardbus_phdl_t *, 180 ddi_acc_handle_t); 181 static void cardbus_get_mem(dev_info_t *, cardbus_phdl_t *, uint32_t, 182 uint64_t *); 183 static void cardbus_get_io(dev_info_t *, cardbus_phdl_t *, uint32_t, 184 uint32_t *); 185 static int cardbus_sum_resources(dev_info_t *, void *); 186 static int cardbus_free_bridge_resources(dev_info_t *); 187 static int cardbus_free_device_resources(dev_info_t *); 188 static int cardbus_free_resources(dev_info_t *); 189 static int cardbus_probe_bridge(cbus_t *, dev_info_t *, uint_t, 190 uint_t, uint_t); 191 static int cardbus_probe_children(cbus_t *, dev_info_t *, uint_t, uint_t, 192 uint_t, uint8_t *); 193 static int cardbus_add_config_reg(dev_info_t *, uint_t, uint_t, uint_t); 194 static int cardbus_add_isa_node(cbus_t *, dev_info_t *, struct isa_node *); 195 static int cardbus_config_setup(dev_info_t *, ddi_acc_handle_t *); 196 static void cardbus_config_teardown(ddi_acc_handle_t *); 197 static void cardbus_reparent_children(dev_info_t *, dev_info_t *); 198 static int cardbus_update_assigned_prop(dev_info_t *, pci_regspec_t *); 199 static int cardbus_update_available_prop(dev_info_t *, uint32_t, 200 uint64_t, uint64_t); 201 static int cardbus_update_ranges_prop(dev_info_t *, cardbus_range_t *); 202 static int cardbus_update_reg_prop(dev_info_t *dip, uint32_t regvalue, 203 uint_t reg_offset); 204 static int cardbus_set_standard_props(dev_info_t *parent, dev_info_t *dip, 205 ddi_acc_handle_t config_handle); 206 static int cardbus_set_isa_props(dev_info_t *parent, dev_info_t *dip, 207 char *name, char *compat[]); 208 static int cardbus_set_busnode_props(dev_info_t *); 209 static int cardbus_set_busnode_isaprops(dev_info_t *); 210 static int cardbus_set_childnode_props(dev_info_t *dip, 211 ddi_acc_handle_t config_handle); 212 static void cardbus_set_bus_numbers(ddi_acc_handle_t config_handle, 213 uint_t primary, uint_t secondary); 214 static void enable_pci_isa_bridge(dev_info_t *dip, 215 ddi_acc_handle_t config_handle); 216 static void enable_pci_pci_bridge(dev_info_t *dip, 217 ddi_acc_handle_t config_handle); 218 static void enable_cardbus_bridge(dev_info_t *dip, 219 ddi_acc_handle_t config_handle); 220 static void disable_pci_pci_bridge(dev_info_t *dip, 221 ddi_acc_handle_t config_handle); 222 static void disable_cardbus_bridge(dev_info_t *dip, 223 ddi_acc_handle_t config_handle); 224 static void enable_cardbus_device(dev_info_t *, ddi_acc_handle_t); 225 static void disable_cardbus_device(ddi_acc_handle_t config_handle); 226 static void cardbus_force_boolprop(dev_info_t *dip, char *pname); 227 static void cardbus_force_intprop(dev_info_t *dip, char *pname, 228 int *pval, int len); 229 static void cardbus_force_stringprop(dev_info_t *dip, char *pname, 230 char *pval); 231 static void split_addr(char *, int *, int *); 232 #ifdef DEBUG 233 static void cardbus_dump_common_config(ddi_acc_handle_t config_handle); 234 static void cardbus_dump_device_config(ddi_acc_handle_t config_handle); 235 static void cardbus_dump_bridge_config(ddi_acc_handle_t config_handle, 236 uint8_t header_type); 237 static void cardbus_dump_config(ddi_acc_handle_t config_handle); 238 static void cardbus_dump_reg(dev_info_t *dip, const pci_regspec_t *regspec, 239 int nelems); 240 #endif 241 242 static cardbus_phdl_t *cardbus_phdl_list = NULL; 243 244 static struct cardbus_name_entry cardbus_class_lookup [] = { 245 { 0x001, "display", 9 }, 246 { 0x100, "scsi", 4 }, 247 { 0x101, "ide", 4 }, 248 { 0x102, "fdc", 4 }, 249 { 0x103, "ipi", 4 }, 250 { 0x104, "raid", 4 }, 251 { 0x200, "ethernet", 6 }, 252 { 0x201, "token-ring", 6 }, 253 { 0x202, "fddi", 6 }, 254 { 0x203, "atm", 6 }, 255 { 0x300, "display", 9 }, /* VGA card */ 256 { 0x380, "display", 9 }, /* other - for the Raptor Card */ 257 { 0x400, "video", 11 }, 258 { 0x401, "sound", 11 }, 259 { 0x500, "memory", 11 }, 260 { 0x501, "flash", 11 }, 261 { 0x600, "host", 11 }, 262 { 0x601, "isa", 11 }, 263 { 0x602, "eisa", 11 }, 264 { 0x603, "mca", 11 }, 265 { 0x604, "pci", 11 }, 266 { 0x605, "pcmcia", 11 }, 267 { 0x606, "nubus", 11 }, 268 { 0x607, "cardbus", 11 }, 269 { 0x680, NULL, 8 }, 270 { 0x700, "serial", 11 }, 271 { 0x701, "parallel", 6 }, 272 { 0x800, "interrupt-controller", 3 }, 273 { 0x801, "dma-controller", 3 }, 274 { 0x802, "timer", 3 }, 275 { 0x803, "rtc", 3 }, 276 { 0x900, "keyboard", 8 }, 277 { 0x901, "pen", 8 }, 278 { 0x902, "mouse", 8 }, 279 { 0xa00, "dock", 1 }, 280 { 0xb00, "cpu", 1 }, 281 { 0xc00, "firewire", 9 }, 282 { 0xc01, "access-bus", 4 }, 283 { 0xc02, "ssa", 4 }, 284 { 0xc03, "usb", 9 }, 285 { 0xc04, "fibre-channel", 6 }, 286 { 0, 0 } 287 }; 288 289 #ifndef _DONT_USE_1275_GENERIC_NAMES 290 static char *cardbus_get_class_name(uint32_t classcode); 291 #endif /* _DONT_USE_1275_GENERIC_NAMES */ 292 293 /* 294 * Reprogram ILINE with default value only if BIOS doesn't program it 295 */ 296 int 297 cardbus_validate_iline(dev_info_t *dip, ddi_acc_handle_t handle) 298 { 299 uint8_t intline = 0xff; 300 301 if (pci_config_get8(handle, PCI_CONF_IPIN)) { 302 intline = pci_config_get8(handle, PCI_CONF_ILINE); 303 if ((intline == 0) || (intline == 0xff)) { 304 intline = ddi_getprop(DDI_DEV_T_ANY, dip, 305 DDI_PROP_CANSLEEP|DDI_PROP_DONTPASS, 306 "interrupt-line", 0xff); 307 if (intline == (uint8_t)0xff) { 308 intline = ddi_getprop(DDI_DEV_T_ANY, 309 ddi_get_parent(dip), 310 DDI_PROP_CANSLEEP /* |DDI_PROP_DONTPASS */, 311 "interrupt-line", 0xb); 312 } 313 314 pci_config_put8(handle, PCI_CONF_ILINE, intline); 315 } 316 (void) ndi_prop_update_int(DDI_DEV_T_NONE, dip, 317 "interrupt-line", intline); 318 } 319 return (intline); 320 } 321 322 /* 323 * This entry point is called to configure a device (and 324 * all its children) on the given bus. It is called when 325 * a new device is added to the PCI domain. This routine 326 * will create the device tree and program the devices 327 * registers. 328 */ 329 int 330 cardbus_configure(cbus_t *cbp) 331 { 332 uint_t bus; 333 int cardbus_dev, func; 334 dev_info_t *attach_point; 335 336 cardbus_err(cbp->cb_dip, 6, "cardbus_configure ()\n"); 337 338 bus = cardbus_primary_busno(cbp->cb_dip); 339 340 if (ndi_devi_alloc(cbp->cb_dip, DEVI_PSEUDO_NEXNAME, 341 (pnode_t)DEVI_SID_NODEID, 342 &attach_point) != NDI_SUCCESS) { 343 cardbus_err(cbp->cb_dip, 1, 344 "cardbus_configure(): Failed to alloc probe node\n"); 345 return (PCICFG_FAILURE); 346 } 347 348 /* 349 * Node name marks this node as the "attachment point". 350 */ 351 if (ndi_devi_set_nodename(attach_point, 352 "hp_attachment", 0) != NDI_SUCCESS) { 353 cardbus_err(cbp->cb_dip, 1, 354 "Failed to set nodename for attachment node\n"); 355 (void) ndi_devi_free(attach_point); 356 return (PCICFG_FAILURE); 357 } 358 359 cardbus_err(ddi_get_parent(attach_point), 8, 360 "Set bus type to cardbus\n"); 361 (void) ddi_prop_update_string(DDI_DEV_T_NONE, 362 ddi_get_parent(attach_point), PCM_DEVICETYPE, 363 "cardbus"); 364 365 split_addr(ddi_get_name_addr(cbp->cb_dip), &cardbus_dev, &func); 366 367 cardbus_err(attach_point, 8, 368 "Configuring [0x%x][0x%x][0x%x]\n", bus, cardbus_dev, func); 369 370 switch (cardbus_probe_bridge(cbp, attach_point, 371 bus, cardbus_dev, func)) { 372 case PCICFG_FAILURE: 373 cardbus_err(cbp->cb_dip, 4, 374 "configure failed: bus [0x%x] slot [0x%x] func [0x%x]\n", 375 bus, cardbus_dev, func); 376 goto cleanup; 377 case PCICFG_NODEVICE: 378 cardbus_err(cbp->cb_dip, 4, 379 "no device: bus [0x%x] slot [0x%x] func [0x%x]\n", 380 bus, cardbus_dev, func); 381 goto cleanup; 382 default: 383 cardbus_err(cbp->cb_dip, 9, 384 "configure: bus => [%d] slot => [%d] func => [%d]\n", 385 bus, cardbus_dev, func); 386 break; 387 } 388 389 if (cardbus_program_ap(cbp->cb_dip) == PCICFG_SUCCESS) { 390 (void) cardbus_reparent_children(attach_point, cbp->cb_dip); 391 (void) ndi_devi_free(attach_point); 392 cbp->cb_nex_ops->enable_intr(cbp->cb_dip); 393 return (PCICFG_SUCCESS); 394 } 395 396 cardbus_err(cbp->cb_dip, 1, "Failed to program devices\n"); 397 398 cleanup: 399 /* 400 * Clean up a partially created "probe state" tree. 401 * There are no resources allocated to the in the 402 * probe state. 403 */ 404 405 cardbus_err(cbp->cb_dip, 6, 406 "Look up device [0x%x] function [0x%x] to clean up\n", 407 cardbus_dev, func); 408 409 cardbus_err(cbp->cb_dip, 6, 410 "Cleaning up device [0x%x] function [0x%x]\n", 411 cardbus_dev, func); 412 413 /* 414 * If this was a bridge device it will have a 415 * probe handle - if not, no harm in calling this. 416 */ 417 (void) cardbus_destroy_phdl(cbp->cb_dip); 418 419 if (ddi_get_child(attach_point)) { 420 /* 421 * This will free up the node 422 */ 423 (void) ndi_devi_offline(ddi_get_child(attach_point), 424 NDI_UNCONFIG|NDI_DEVI_REMOVE); 425 } 426 (void) ndi_devi_free(attach_point); 427 428 return (PCICFG_FAILURE); 429 } 430 431 int 432 cardbus_unconfigure(cbus_t *cbp) 433 { 434 ddi_acc_handle_t config_handle; 435 dev_info_t *dip = cbp->cb_dip; 436 437 cbp->cb_nex_ops->disable_intr(dip); 438 if (pci_config_setup(dip, &config_handle) == DDI_SUCCESS) { 439 disable_cardbus_bridge(dip, config_handle); 440 (void) pci_config_teardown(&config_handle); 441 } else { 442 cardbus_err(dip, 1, 443 "cardbus_unconfigure(): Failed to setup config space\n"); 444 } 445 446 (void) cardbus_free_chunk(dip); 447 cardbus_err(dip, 6, 448 "cardbus_unconfigure: calling cardbus_free_bridge_resources\n"); 449 (void) cardbus_free_bridge_resources(dip); 450 451 return (PCICFG_SUCCESS); 452 } 453 454 int 455 cardbus_teardown_device(dev_info_t *dip) 456 { 457 /* 458 * Free up resources associated with 'dip' 459 */ 460 461 if (cardbus_free_resources(dip) != PCICFG_SUCCESS) { 462 cardbus_err(dip, 1, 463 "cardbus_teardown_device: Failed to free resources\n"); 464 return (PCICFG_FAILURE); 465 } 466 467 if (ndi_devi_offline(dip, NDI_DEVI_REMOVE) != NDI_SUCCESS) { 468 cardbus_err(dip, 1, 469 "cardbus_teardown_device: " 470 "Failed to offline and remove node\n"); 471 return (PCICFG_FAILURE); 472 } 473 474 return (PCICFG_SUCCESS); 475 } 476 477 /* 478 * Get the primary pci bus number. This should be the lowest number 479 * in the bus-range property of our parent. 480 */ 481 int 482 cardbus_primary_busno(dev_info_t *dip) 483 { 484 int len, rval; 485 char bus_type[16] = "(unknown)"; 486 dev_info_t *par = ddi_get_parent(dip); 487 cardbus_bus_range_t *bus_range; 488 489 ASSERT(strcmp(ddi_driver_name(dip), "pcic") == 0); 490 len = sizeof (bus_type); 491 if ((ddi_prop_op(DDI_DEV_T_ANY, par, PROP_LEN_AND_VAL_BUF, 492 DDI_PROP_CANSLEEP | DDI_PROP_DONTPASS, 493 "device_type", 494 (caddr_t)&bus_type, &len) == DDI_SUCCESS)) { 495 ASSERT((strcmp(bus_type, "pci") == 0) || 496 (strcmp(bus_type, "cardbus") == 0)); 497 if (ddi_getlongprop(DDI_DEV_T_ANY, par, 0, "bus-range", 498 (caddr_t)&bus_range, &len) == DDI_PROP_SUCCESS) { 499 cardbus_err(dip, 9, 500 "cardbus_primary_busno: bus range is %d to %d\n", 501 bus_range->lo, bus_range->hi); 502 rval = (int)bus_range->lo; 503 kmem_free((caddr_t)bus_range, len); 504 return (rval); 505 } 506 } 507 508 cardbus_err(dip, 2, 509 "cardbus_primary_busno: Not a pci device or no bus-range\n"); 510 return (-1); 511 } 512 513 static cardbus_phdl_t * 514 cardbus_find_phdl(dev_info_t *dip) 515 { 516 cardbus_phdl_t *entry; 517 518 mutex_enter(&cardbus_list_mutex); 519 for (entry = cardbus_phdl_list; entry != NULL; entry = entry->next) { 520 if (entry->dip == dip) { 521 mutex_exit(&cardbus_list_mutex); 522 return (entry); 523 } 524 } 525 mutex_exit(&cardbus_list_mutex); 526 527 /* 528 * Did'nt find entry - create one 529 */ 530 return (cardbus_create_phdl(dip)); 531 } 532 533 static cardbus_phdl_t * 534 cardbus_create_phdl(dev_info_t *dip) 535 { 536 cardbus_phdl_t *new; 537 538 new = (cardbus_phdl_t *)kmem_zalloc(sizeof (cardbus_phdl_t), KM_SLEEP); 539 540 new->dip = dip; 541 new->io_gran = CBCFG_IOGRAN; 542 new->memory_gran = CBCFG_MEMGRAN; 543 mutex_enter(&cardbus_list_mutex); 544 new->next = cardbus_phdl_list; 545 cardbus_phdl_list = new; 546 mutex_exit(&cardbus_list_mutex); 547 548 return (new); 549 } 550 551 static int 552 cardbus_destroy_phdl(dev_info_t *dip) 553 { 554 cardbus_phdl_t *entry; 555 cardbus_phdl_t *follow = NULL; 556 ra_return_t res; 557 558 mutex_enter(&cardbus_list_mutex); 559 for (entry = cardbus_phdl_list; entry != NULL; follow = entry, 560 entry = entry->next) { 561 if (entry->dip == dip) { 562 if (entry == cardbus_phdl_list) { 563 cardbus_phdl_list = entry->next; 564 } else { 565 follow->next = entry->next; 566 } 567 /* 568 * If this entry has any allocated memory 569 * or IO space associated with it, that 570 * must be freed up. 571 */ 572 if (entry->memory_len > 0) { 573 res.ra_addr_lo = entry->memory_base; 574 res.ra_len = entry->memory_len; 575 (void) pcmcia_free_mem(entry->res_dip, &res); 576 #ifdef _LP64 577 cardbus_err(dip, 8, 578 "cardbus_destroy_phdl: " 579 "MEMORY BASE = [0x%lx] length [0x%lx]\n", 580 entry->memory_base, entry->memory_len); 581 #else 582 cardbus_err(dip, 8, 583 "cardbus_destroy_phdl: " 584 "MEMORY BASE = [0x%llx] length [0x%llx]\n", 585 entry->memory_base, entry->memory_len); 586 #endif 587 } 588 if (entry->io_len > 0) { 589 res.ra_addr_lo = entry->io_base; 590 res.ra_len = entry->io_len; 591 (void) pcmcia_free_io(entry->res_dip, &res); 592 cardbus_err(dip, 8, 593 "cardbus_destroy_phdl: " 594 "IO BASE = [0x%x] length [0x%x]\n", 595 entry->io_base, entry->io_len); 596 } 597 /* 598 * Destroy this entry 599 */ 600 kmem_free((caddr_t)entry, sizeof (cardbus_phdl_t)); 601 mutex_exit(&cardbus_list_mutex); 602 return (PCICFG_SUCCESS); 603 } 604 } 605 606 mutex_exit(&cardbus_list_mutex); 607 608 /* 609 * Didn't find the entry 610 */ 611 return (PCICFG_FAILURE); 612 } 613 614 static int 615 cardbus_program_ap(dev_info_t *dip) 616 { 617 cardbus_phdl_t *phdl; 618 uint8_t header_type, sec_bus; 619 ddi_acc_handle_t handle; 620 621 if (pci_config_setup(dip, &handle) != DDI_SUCCESS) { 622 cardbus_err(dip, 1, 623 "cardbus_program_ap: Failed to map config space!\n"); 624 return (PCICFG_FAILURE); 625 } 626 627 header_type = pci_config_get8(handle, PCI_CONF_HEADER); 628 sec_bus = pci_config_get8(handle, PCI_BCNF_SECBUS); 629 630 cardbus_err(dip, 6, 631 "cardbus_program_ap (header_type=0x%x)\n", header_type); 632 (void) pci_config_teardown(&handle); 633 634 /* 635 * Header type two is PCI to Cardbus bridge, see page 43 of the 636 * CL-PD6832 data sheet 637 */ 638 switch (header_type & PCI_HEADER_TYPE_M) { 639 case PCI_HEADER_CARDBUS: 640 cardbus_err(dip, 8, 641 "cardbus_program_ap calling cardbus_allocate_chunk\n"); 642 if (cardbus_allocate_chunk(dip, 643 header_type & PCI_HEADER_TYPE_M, 644 sec_bus) != PCICFG_SUCCESS) { 645 cardbus_err(dip, 1, 646 "cardbus_program_ap: " 647 "Not enough memory to hotplug\n"); 648 (void) cardbus_destroy_phdl(dip); 649 return (PCICFG_FAILURE); 650 } 651 652 cardbus_err(dip, 8, 653 "cardbus_program_ap calling cardbus_find_phdl\n"); 654 phdl = cardbus_find_phdl(dip); 655 ASSERT(phdl); 656 657 if (phdl == NULL) { 658 cardbus_err(dip, 1, "cardbus_find_phdl failed\n"); 659 return (PCICFG_FAILURE); 660 } 661 phdl->error = PCICFG_SUCCESS; 662 cardbus_err(dip, 8, 663 "cardbus_program_ap calling cardbus_topbridge_assign\n"); 664 cardbus_topbridge_assign(dip, phdl); 665 666 if (phdl->error != PCICFG_SUCCESS) { 667 cardbus_err(dip, 1, "Problem assigning bridge\n"); 668 (void) cardbus_destroy_phdl(dip); 669 return (phdl->error); 670 } 671 break; 672 673 default: 674 return (PCICFG_FAILURE); 675 } 676 677 return (PCICFG_SUCCESS); 678 } 679 680 static void 681 cardbus_topbridge_assign(dev_info_t *dip, cardbus_phdl_t *entry) 682 { 683 ddi_acc_handle_t handle; 684 uint8_t header_type; 685 686 cardbus_err(dip, 6, "cardbus_topbridge_assign\n"); 687 688 if (pci_config_setup(dip, &handle) != DDI_SUCCESS) { 689 cardbus_err(dip, 1, 690 "cardbus_topbridge_bridge_assign: " 691 "Failed to map config space!\n"); 692 return; 693 } 694 695 header_type = pci_config_get8(handle, 696 PCI_CONF_HEADER) & PCI_HEADER_TYPE_M; 697 698 /* cardbus bridge is the same as PCI-PCI bridge */ 699 ASSERT((header_type == PCI_HEADER_PPB) || 700 (header_type == PCI_HEADER_CARDBUS)); 701 702 (void) cardbus_bridge_ranges(dip, entry, handle); 703 704 (void) pci_config_teardown(&handle); 705 } 706 707 static int 708 cardbus_bridge_ranges(dev_info_t *dip, cardbus_phdl_t *entry, 709 ddi_acc_handle_t handle) 710 { 711 cardbus_range_t range[PCICFG_RANGE_LEN]; 712 int bus_range[2]; 713 int count; 714 int i; 715 716 cardbus_err(dip, 8, "cardbus_bridge_ranges\n"); 717 718 bzero((caddr_t)range, sizeof (cardbus_range_t) * PCICFG_RANGE_LEN); 719 720 (void) cardbus_setup_bridge(dip, entry, handle); 721 722 range[0].child_hi = range[0].parent_hi |= (PCI_REG_REL_M | PCI_ADDR_IO); 723 range[0].child_lo = range[0].parent_lo = entry->io_last; 724 range[1].child_hi = range[1].parent_hi |= (PCI_REG_REL_M | 725 PCI_ADDR_MEM32); 726 range[1].child_lo = range[1].parent_lo = entry->memory_last; 727 728 ndi_devi_enter(dip, &count); 729 ddi_walk_devs(ddi_get_child(dip), cardbus_bridge_assign, (void *)entry); 730 ndi_devi_exit(dip, count); 731 732 (void) cardbus_update_bridge(dip, entry, handle); 733 734 bus_range[0] = pci_config_get8(handle, PCI_BCNF_SECBUS); 735 bus_range[1] = pci_config_get8(handle, PCI_BCNF_SUBBUS); 736 737 cardbus_err(dip, 8, 738 "Set up bus-range property to %u->%u\n", 739 bus_range[0], bus_range[1]); 740 741 if ((i = ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 742 "bus-range", 743 bus_range, 2)) != DDI_SUCCESS) { 744 745 if (i == DDI_PROP_NOT_FOUND) { 746 cardbus_err(dip, 8, 747 "Create bus-range property, %u->%u\n", 748 bus_range[0], bus_range[1]); 749 i = ddi_prop_create(DDI_DEV_T_NONE, dip, 750 DDI_PROP_CANSLEEP, 751 "bus-range", (caddr_t)bus_range, 752 sizeof (bus_range)); 753 } 754 755 if (i != DDI_PROP_SUCCESS) { 756 cardbus_err(dip, 1, 757 "Failed to set bus-range property, %u->%u (%d)\n", 758 bus_range[0], bus_range[1], i); 759 entry->error = PCICFG_FAILURE; 760 return (DDI_WALK_TERMINATE); 761 } 762 } 763 764 if (entry->io_len > 0) { 765 range[0].size_lo = entry->io_last - entry->io_base; 766 if (cardbus_update_ranges_prop(dip, &range[0])) { 767 cardbus_err(dip, 1, "Failed to update ranges (i/o)\n"); 768 entry->error = PCICFG_FAILURE; 769 return (DDI_WALK_TERMINATE); 770 } 771 } 772 if (entry->memory_len > 0) { 773 range[1].size_lo = entry->memory_last - entry->memory_base; 774 if (cardbus_update_ranges_prop(dip, &range[1])) { 775 cardbus_err(dip, 1, 776 "Failed to update ranges (memory)\n"); 777 entry->error = PCICFG_FAILURE; 778 return (DDI_WALK_TERMINATE); 779 } 780 } 781 782 return (DDI_WALK_PRUNECHILD); 783 } 784 static int 785 cardbus_bridge_assign(dev_info_t *dip, void *hdl) 786 { 787 ddi_acc_handle_t handle; 788 pci_regspec_t *reg; 789 int length; 790 int rcount; 791 int i; 792 int offset; 793 uint64_t mem_answer; 794 uint32_t io_answer, request; 795 uint8_t header_type, base_class; 796 cardbus_phdl_t *entry = (cardbus_phdl_t *)hdl; 797 798 /* 799 * Ignore the attachment point and pcs. 800 */ 801 if (strcmp(ddi_binding_name(dip), "hp_attachment") == 0 || 802 strcmp(ddi_binding_name(dip), "pcs") == 0) { 803 cardbus_err(dip, 8, "cardbus_bridge_assign: Ignoring\n"); 804 return (DDI_WALK_CONTINUE); 805 } 806 807 808 cardbus_err(dip, 6, "cardbus_bridge_assign\n"); 809 810 if (entry == NULL) { 811 cardbus_err(dip, 1, "Failed to get entry\n"); 812 return (DDI_WALK_TERMINATE); 813 } 814 if (cardbus_config_setup(dip, &handle) != DDI_SUCCESS) { 815 cardbus_err(dip, 1, 816 "cardbus_bridge_assign: Failed to map config space!\n"); 817 entry->error = PCICFG_FAILURE; 818 return (DDI_WALK_TERMINATE); 819 } 820 821 header_type = pci_config_get8(handle, PCI_CONF_HEADER) & 822 PCI_HEADER_TYPE_M; 823 base_class = pci_config_get8(handle, PCI_CONF_BASCLASS); 824 825 /* 826 * This function is not called for the top bridge and we are 827 * not enumerating down a further cardbus interface yet! 828 */ 829 if (base_class == PCI_CLASS_BRIDGE) { 830 uint8_t sub_class; 831 832 sub_class = pci_config_get8(handle, PCI_CONF_SUBCLASS); 833 834 switch (sub_class) { 835 case PCI_BRIDGE_PCI: 836 if (header_type == PCI_HEADER_PPB) { 837 i = cardbus_bridge_ranges(dip, entry, handle); 838 (void) cardbus_config_teardown(&handle); 839 return (i); 840 } 841 goto bad_device; 842 843 case PCI_BRIDGE_ISA: 844 i = cardbus_isa_bridge_ranges(dip, entry, handle); 845 (void) cardbus_config_teardown(&handle); 846 return (i); 847 848 case PCI_BRIDGE_CARDBUS: 849 /* 850 * Fall through, there should be at least one register 851 * set for this. 852 */ 853 break; 854 855 case PCI_BRIDGE_OTHER: 856 default: 857 break; 858 } 859 } 860 861 #ifdef sparc 862 /* 863 * If there is an interrupt pin set program 864 * interrupt line with default values. 865 */ 866 if (pci_config_get8(handle, PCI_CONF_IPIN)) { 867 pci_config_put8(handle, PCI_CONF_ILINE, 0xf); 868 } 869 #else 870 (void) cardbus_validate_iline(dip, handle); 871 #endif 872 873 /* 874 * A single device (under a bridge). 875 * For each "reg" property with a length, allocate memory 876 * and program the base registers. 877 */ 878 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 879 DDI_PROP_DONTPASS, "reg", (caddr_t)®, 880 &length) != DDI_PROP_SUCCESS) { 881 cardbus_err(dip, 1, "Failed to read reg property\n"); 882 entry->error = PCICFG_FAILURE; 883 (void) cardbus_config_teardown(&handle); 884 return (DDI_WALK_TERMINATE); 885 } 886 887 rcount = length / sizeof (pci_regspec_t); 888 cardbus_err(dip, 9, "rcount = %d\n", rcount); 889 890 for (i = 0; i < rcount; i++) { 891 if ((reg[i].pci_size_low != 0) || (reg[i].pci_size_hi != 0)) { 892 offset = PCI_REG_REG_G(reg[i].pci_phys_hi); 893 switch (PCI_REG_ADDR_G(reg[i].pci_phys_hi)) { 894 case PCI_REG_ADDR_G(PCI_ADDR_MEM64): 895 896 (void) cardbus_get_mem(ddi_get_parent(dip), 897 entry, reg[i].pci_size_low, &mem_answer); 898 ASSERT(!PCICFG_HIADDR(mem_answer)); 899 pci_config_put32(handle, offset, 900 PCICFG_LOADDR(mem_answer)); 901 pci_config_put32(handle, offset + 4, 902 PCICFG_HIADDR(mem_answer)); 903 cardbus_err(dip, 8, 904 "REGISTER (64)LO [0x%x] ----> [0x%02x]\n", 905 pci_config_get32(handle, offset), offset); 906 cardbus_err(dip, 8, 907 "REGISTER (64)HI [0x%x] ----> [0x%02x]\n", 908 pci_config_get32(handle, offset+4), 909 offset+4); 910 reg[i].pci_phys_low = PCICFG_HIADDR(mem_answer); 911 reg[i].pci_phys_mid = PCICFG_LOADDR(mem_answer); 912 break; 913 914 case PCI_REG_ADDR_G(PCI_ADDR_MEM32): 915 /* allocate memory space from the allocator */ 916 917 (void) cardbus_get_mem(ddi_get_parent(dip), 918 entry, reg[i].pci_size_low, &mem_answer); 919 pci_config_put32(handle, offset, 0xffffffff); 920 request = pci_config_get32(handle, offset); 921 922 pci_config_put32(handle, offset, 923 (uint32_t)mem_answer); 924 reg[i].pci_phys_low = (uint32_t)mem_answer; 925 reg[i].pci_phys_mid = 0; 926 if (((PCI_BASE_TYPE_M & request) == 927 PCI_BASE_TYPE_ALL) && 928 ((PCI_BASE_SPACE_M & request) == 929 PCI_BASE_SPACE_MEM)) { 930 cardbus_err(dip, 8, 931 "REGISTER (64)LO [0x%x] ----> " 932 "[0x%02x]\n", 933 pci_config_get32(handle, offset), 934 offset); 935 pci_config_put32(handle, 936 offset + 4, 0); 937 cardbus_err(dip, 8, 938 "REGISTER (64)HI [0x%x] ----> " 939 "[0x%02x]\n", 940 pci_config_get32(handle, offset+4), 941 offset+4); 942 } else { 943 cardbus_err(dip, 8, 944 "REGISTER (32)LO [0x%x] ----> " 945 "[0x%02x]\n", 946 pci_config_get32(handle, offset), 947 offset); 948 } 949 break; 950 951 case PCI_REG_ADDR_G(PCI_ADDR_IO): 952 /* allocate I/O space from the allocator */ 953 954 (void) cardbus_get_io(ddi_get_parent(dip), 955 entry, reg[i].pci_size_low, &io_answer); 956 pci_config_put32(handle, offset, io_answer); 957 cardbus_err(dip, 8, 958 "REGISTER (I/O)LO [0x%x] ----> [0x%02x]\n", 959 pci_config_get32(handle, offset), offset); 960 reg[i].pci_phys_low = io_answer; 961 break; 962 963 default: 964 cardbus_err(dip, 1, "Unknown register type\n"); 965 kmem_free(reg, length); 966 (void) cardbus_config_teardown(&handle); 967 entry->error = PCICFG_FAILURE; 968 return (DDI_WALK_TERMINATE); 969 } /* switch */ 970 971 /* 972 * Now that memory locations are assigned, 973 * update the assigned address property. 974 */ 975 if (cardbus_update_assigned_prop(dip, 976 ®[i]) != PCICFG_SUCCESS) { 977 kmem_free(reg, length); 978 (void) cardbus_config_teardown(&handle); 979 entry->error = PCICFG_FAILURE; 980 return (DDI_WALK_TERMINATE); 981 } 982 } 983 } 984 kmem_free(reg, length); 985 enable_cardbus_device(dip, handle); 986 #ifdef CARDBUS_DEBUG 987 if (cardbus_debug >= 9) { 988 cardbus_dump_config(handle); 989 } 990 #endif 991 bad_device: 992 (void) cardbus_config_teardown(&handle); 993 return (DDI_WALK_CONTINUE); 994 } 995 996 static int 997 cardbus_isa_bridge_ranges(dev_info_t *dip, cardbus_phdl_t *entry, 998 ddi_acc_handle_t handle) 999 { 1000 struct ebus_pci_rangespec range; 1001 int count; 1002 pci_regspec_t *reg; 1003 int length; 1004 int rcount; 1005 uint32_t io_answer = 0xffffffff; 1006 isa_phdl_t isa_phdl; 1007 int i; 1008 1009 cardbus_err(dip, 8, "cardbus_isa_bridge_ranges\n"); 1010 1011 bzero((caddr_t)&range, sizeof (range)); 1012 1013 #ifdef sparc 1014 /* 1015 * If there is an interrupt pin set program 1016 * interrupt line with default values. 1017 */ 1018 if (pci_config_get8(handle, PCI_CONF_IPIN)) { 1019 pci_config_put8(handle, PCI_CONF_ILINE, 0xf); 1020 } 1021 #else 1022 (void) cardbus_validate_iline(dip, handle); 1023 #endif 1024 1025 /* 1026 * For each "reg" property with a length, allocate memory. 1027 */ 1028 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 1029 DDI_PROP_DONTPASS, "reg", (caddr_t)®, 1030 &length) != DDI_PROP_SUCCESS) { 1031 cardbus_err(dip, 1, "Failed to read reg property\n"); 1032 entry->error = PCICFG_FAILURE; 1033 return (DDI_WALK_TERMINATE); 1034 } 1035 1036 rcount = length / sizeof (pci_regspec_t); 1037 1038 for (i = 0; i < rcount; i++) { 1039 if ((reg[i].pci_size_low != 0) || (reg[i].pci_size_hi != 0)) { 1040 switch (PCI_REG_ADDR_G(reg[i].pci_phys_hi)) { 1041 case PCI_REG_ADDR_G(PCI_ADDR_IO): 1042 /* allocate I/O space from the allocator */ 1043 1044 (void) cardbus_get_io(ddi_get_parent(dip), 1045 entry, reg[i].pci_size_low, &io_answer); 1046 cardbus_err(dip, 8, 1047 "ISA (I/O)LO ----> [0x%x]\n", io_answer); 1048 reg[i].pci_phys_low = io_answer; 1049 range.phys_hi = 0; 1050 range.phys_low = io_answer; 1051 range.par_phys_hi = reg[i].pci_phys_hi | 1052 PCI_REG_REL_M; 1053 range.par_phys_low = reg[i].pci_phys_low; 1054 range.par_phys_mid = reg[i].pci_phys_mid; 1055 range.rng_size = reg[i].pci_size_low; 1056 i = rcount; 1057 break; 1058 1059 default: 1060 cardbus_err(dip, 1, "Unknown register type\n"); 1061 kmem_free(reg, length); 1062 (void) cardbus_config_teardown(&handle); 1063 entry->error = PCICFG_FAILURE; 1064 return (DDI_WALK_TERMINATE); 1065 } /* switch */ 1066 } 1067 } 1068 kmem_free(reg, length); 1069 1070 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, 1071 dip, "ranges", (int *)&range, 1072 sizeof (range)/sizeof (int)); 1073 if (io_answer != 0xffffffff) { 1074 isa_phdl.dip = dip; 1075 isa_phdl.handle = handle; 1076 isa_phdl.io_base = io_answer; 1077 isa_phdl.io_decode_reg = 0x58; /* Pos decoded IO space 0 reg */ 1078 /* i_ndi_block_device_tree_changes(&count); */ 1079 ndi_devi_enter(dip, &count); 1080 ddi_walk_devs(ddi_get_child(dip), 1081 cardbus_add_isa_reg, (void *)&isa_phdl); 1082 /* i_ndi_allow_device_tree_changes(count); */ 1083 ndi_devi_exit(dip, count); 1084 } 1085 return (DDI_WALK_PRUNECHILD); 1086 } 1087 1088 /* 1089 * This is specific to ITE8888 chip. 1090 */ 1091 static int 1092 cardbus_add_isa_reg(dev_info_t *dip, void *arg) 1093 { 1094 uint32_t io_reg = 0; 1095 int length; 1096 uint32_t reg[3], *breg; 1097 isa_phdl_t *phdl; 1098 uint8_t sz; 1099 1100 phdl = (isa_phdl_t *)arg; 1101 cardbus_err(dip, 6, 1102 "cardbus_add_isa_reg, base 0x%x\n", phdl->io_base); 1103 1104 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 1105 DDI_PROP_DONTPASS, "basereg", (caddr_t)&breg, 1106 &length) != DDI_PROP_SUCCESS) { 1107 return (DDI_WALK_CONTINUE); 1108 } 1109 1110 if ((length / sizeof (reg)) < 1) { 1111 kmem_free(breg, length); 1112 return (DDI_WALK_CONTINUE); 1113 } 1114 1115 /* 1116 * Add the "reg" property. 1117 */ 1118 reg[0] = 0; 1119 reg[1] = breg[1] + phdl->io_base; 1120 reg[2] = breg[2]; 1121 1122 /* 1123 * Generate the postive IO decode register setting. 1124 */ 1125 for (sz = 0; sz < 8; sz++) 1126 if ((1<<sz) >= breg[2]) { 1127 io_reg = breg[1] 1128 | (1uL <<31) /* Enable */ 1129 | (2uL <<29) /* Medium speed */ 1130 | (1uL <<28) /* Aliase enable, */ 1131 /* Don't care A[15:10] */ 1132 | (sz<<24); /* Size code */ 1133 break; 1134 } 1135 1136 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 1137 "reg", (int *)reg, 3); 1138 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "basereg"); 1139 1140 if (io_reg) { 1141 pci_config_put32(phdl->handle, phdl->io_decode_reg, io_reg); 1142 cardbus_err(dip, 6, 1143 "cardbus_add_isa_reg: I/O decode reg (0x%x) set to 0x%x\n", 1144 phdl->io_decode_reg, 1145 pci_config_get32(phdl->handle, phdl->io_decode_reg)); 1146 phdl->io_decode_reg += sizeof (io_reg); 1147 } else 1148 cardbus_err(dip, 1, 1149 "cardbus_add_isa_reg: register size (0x%x) too large\n", 1150 breg[2]); 1151 kmem_free(breg, length); 1152 return (DDI_WALK_CONTINUE); 1153 } 1154 1155 /* 1156 * In case we want to ensure that some space is allocated to the 1157 * device tree below the cardbus bridge. 1158 * This is only necessary if there is a device that needs to allocate 1159 * resource below us. This can happen if there is another cardbus/PCMCIA 1160 * bridge downstream. 1161 */ 1162 static uint32_t cardbus_min_spare_mem = 0; 1163 static uint32_t cardbus_min_spare_io = 0; 1164 1165 /* 1166 * The "dip" passed to this routine is assumed to be 1167 * the device at the attachment point. Currently it is 1168 * assumed to be a bridge. 1169 */ 1170 static int 1171 cardbus_allocate_chunk(dev_info_t *dip, uint8_t type, uint8_t sec_bus) 1172 { 1173 cardbus_phdl_t *phdl; 1174 ndi_ra_request_t *mem_request; 1175 ndi_ra_request_t *io_request; 1176 ra_return_t res; 1177 int count; 1178 1179 /* 1180 * This should not find an existing entry - so 1181 * it will create a new one. 1182 */ 1183 phdl = cardbus_find_phdl(dip); 1184 ASSERT(phdl); 1185 1186 mem_request = &phdl->mem_req; 1187 io_request = &phdl->io_req; 1188 1189 /* 1190 * Set highest_bus here. 1191 * Otherwise if we don't find another bridge 1192 * this never gets set. 1193 */ 1194 phdl->highest_bus = sec_bus; 1195 1196 /* 1197 * From this point in the tree - walk the devices, 1198 * The function passed in will read and "sum" up 1199 * the memory and I/O requirements and put them in 1200 * structure "phdl". 1201 */ 1202 phdl->error = PCICFG_SUCCESS; 1203 ndi_devi_enter(dip, &count); 1204 ddi_walk_devs(ddi_get_child(dip), cardbus_sum_resources, (void *)phdl); 1205 ndi_devi_exit(dip, count); 1206 1207 if (phdl->error != PCICFG_SUCCESS) { 1208 cmn_err(CE_WARN, "Failure summing resources\n"); 1209 return (phdl->error); 1210 } 1211 1212 /* 1213 * Call into the memory allocator with the request. 1214 * Record the addresses returned in the phdl 1215 */ 1216 #ifdef _LP64 1217 cardbus_err(dip, 8, 1218 "AP requires [0x%lx] bytes of memory space, alligned 0x%x\n", 1219 mem_request->ra_len, phdl->memory_gran); 1220 cardbus_err(dip, 8, 1221 "AP requires [0x%lx] bytes of I/O space, alligned 0x%x\n", 1222 io_request->ra_len, phdl->io_gran); 1223 #else 1224 cardbus_err(dip, 8, 1225 "AP requires [0x%llx] bytes of memory space, alligned 0x%x\n", 1226 mem_request->ra_len, phdl->memory_gran); 1227 cardbus_err(dip, 8, 1228 "AP requires [0x%llx] bytes of I/O space, alligned 0x%x\n", 1229 io_request->ra_len, phdl->io_gran); 1230 #endif 1231 1232 ASSERT(type == PCI_HEADER_CARDBUS); 1233 1234 mem_request->ra_align_mask = phdl->memory_gran - 1; 1235 io_request->ra_align_mask = phdl->io_gran - 1; 1236 phdl->res_dip = (dev_info_t *)-1; 1237 1238 mem_request->ra_len += cardbus_min_spare_mem; 1239 if (mem_request->ra_len) { 1240 mem_request->ra_len = PCICFG_ROUND_UP( 1241 mem_request->ra_len, 1242 phdl->memory_gran); 1243 #ifdef _LP64 1244 cardbus_err(dip, 8, 1245 "cardbus_allocate_chunk: ndi_ra_alloc 0x%lx bytes\n", 1246 mem_request->ra_len); 1247 #else 1248 cardbus_err(dip, 8, 1249 "cardbus_allocate_chunk: ndi_ra_alloc 0x%llx bytes\n", 1250 mem_request->ra_len); 1251 #endif 1252 1253 if (pcmcia_alloc_mem(dip, mem_request, &res, 1254 &phdl->res_dip) != NDI_SUCCESS) { 1255 cmn_err(CE_WARN, "Failed to allocate memory for %s\n", 1256 ddi_driver_name(dip)); 1257 return (PCICFG_FAILURE); 1258 } 1259 1260 phdl->memory_base = phdl->memory_last = res.ra_addr_lo; 1261 phdl->memory_len = res.ra_len; 1262 } 1263 1264 io_request->ra_len += cardbus_min_spare_io; 1265 if (io_request->ra_len) { 1266 1267 #if defined(__x86) || defined(__amd64) 1268 io_request->ra_boundbase = 0x1000; 1269 io_request->ra_boundlen = 0xefff; 1270 #else 1271 io_request->ra_boundbase = 0; 1272 io_request->ra_boundlen = PCICFG_4GIG_LIMIT; 1273 #endif 1274 io_request->ra_flags |= NDI_RA_ALLOC_BOUNDED; 1275 io_request->ra_len = PCICFG_ROUND_UP(io_request->ra_len, 1276 phdl->io_gran); 1277 io_request->ra_align_mask = max(PCICFG_IOGRAN, 1278 phdl->io_gran) - 1; 1279 1280 if (pcmcia_alloc_io(dip, io_request, &res, 1281 &phdl->res_dip) != NDI_SUCCESS) { 1282 cmn_err(CE_WARN, "Failed to allocate I/O space " 1283 "for %s\n", ddi_driver_name(dip)); 1284 if (mem_request->ra_len) { 1285 res.ra_addr_lo = phdl->memory_base; 1286 res.ra_len = phdl->memory_len; 1287 (void) pcmcia_free_mem(phdl->res_dip, &res); 1288 phdl->memory_len = phdl->io_len = 0; 1289 } 1290 return (PCICFG_FAILURE); 1291 } 1292 1293 phdl->io_base = phdl->io_last = (uint32_t)res.ra_addr_lo; 1294 phdl->io_len = (uint32_t)res.ra_len; 1295 } 1296 1297 #ifdef _LP64 1298 cardbus_err(dip, 6, 1299 "MEMORY BASE = [0x%lx] length [0x%lx]\n", 1300 phdl->memory_base, phdl->memory_len); 1301 #else 1302 cardbus_err(dip, 6, 1303 "MEMORY BASE = [0x%llx] length [0x%llx]\n", 1304 phdl->memory_base, phdl->memory_len); 1305 #endif 1306 cardbus_err(dip, 6, 1307 "IO BASE = [0x%x] length [0x%x]\n", 1308 phdl->io_base, phdl->io_len); 1309 1310 return (PCICFG_SUCCESS); 1311 } 1312 1313 static int 1314 cardbus_free_chunk(dev_info_t *dip) 1315 { 1316 uint_t *bus; 1317 int k; 1318 1319 cardbus_err(dip, 6, "cardbus_free_chunk\n"); 1320 1321 (void) cardbus_destroy_phdl(dip); 1322 1323 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 1324 DDI_PROP_DONTPASS, "bus-range", (caddr_t)&bus, 1325 &k) != DDI_PROP_SUCCESS) { 1326 cardbus_err(dip, 1, 1327 "cardbus_free_chunk: Failed to read bus-range property\n"); 1328 return (PCICFG_FAILURE); 1329 } 1330 1331 cardbus_err(dip, 6, 1332 "cardbus_free_chunk: Freeing bus [%d] range [%d]\n", 1333 bus[0], bus[1] - bus[0] + 1); 1334 1335 if (ndi_ra_free(dip, 1336 (uint64_t)bus[0], (uint64_t)(bus[1] - bus[0] + 1), 1337 NDI_RA_TYPE_PCI_BUSNUM, NDI_RA_PASS) != NDI_SUCCESS) { 1338 cardbus_err(dip, 1, 1339 "cardbus_free_chunk: Failed to free bus numbers\n"); 1340 1341 kmem_free(bus, k); 1342 return (PCICFG_FAILURE); 1343 } 1344 1345 kmem_free(bus, k); 1346 return (PCICFG_SUCCESS); 1347 } 1348 1349 /* 1350 * Put bridge registers into initial state 1351 */ 1352 static void 1353 cardbus_setup_bridge(dev_info_t *dip, cardbus_phdl_t *entry, 1354 ddi_acc_handle_t handle) 1355 { 1356 uint8_t header_type = pci_config_get8(handle, PCI_CONF_HEADER); 1357 1358 #ifdef _LP64 1359 cardbus_err(NULL, 6, 1360 "cardbus_setup_bridge: " 1361 "highest bus %d, mem_last 0x%lx, io_last 0x%x\n", 1362 entry->highest_bus, entry->memory_last, entry->io_last); 1363 #else 1364 cardbus_err(NULL, 6, 1365 "cardbus_setup_bridge: " 1366 "highest bus %d, mem_last 0x%llx, io_last 0x%x\n", 1367 entry->highest_bus, entry->memory_last, entry->io_last); 1368 #endif 1369 1370 if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) { 1371 uint32_t uval; 1372 1373 /* 1374 * The highest bus seen during probing is 1375 * the max-subordinate bus 1376 */ 1377 pci_config_put8(handle, PCI_BCNF_SUBBUS, entry->highest_bus); 1378 1379 uval = PCICFG_ROUND_UP(entry->memory_last, PCICFG_MEMGRAN); 1380 if (uval != entry->memory_last) { 1381 #ifdef _LP64 1382 cardbus_err(dip, 8, 1383 "Adding [0x%lx] before bridge (mem)\n", 1384 uval - entry->memory_last); 1385 #else 1386 cardbus_err(dip, 8, 1387 "Adding [0x%llx] before bridge (mem)\n", 1388 uval - entry->memory_last); 1389 #endif 1390 (void) cardbus_get_mem(ddi_get_parent(dip), entry, 1391 uval - entry->memory_last, NULL); 1392 } 1393 1394 /* 1395 * Program the memory base register with the 1396 * start of the memory range 1397 */ 1398 #ifdef _LP64 1399 cardbus_err(NULL, 8, 1400 "store 0x%x(0x%lx) in pci bridge memory base register\n", 1401 PCICFG_HIWORD(PCICFG_LOADDR(uval)), 1402 entry->memory_last); 1403 #else 1404 cardbus_err(NULL, 8, 1405 "store 0x%x(0x%llx) in pci bridge memory base register\n", 1406 PCICFG_HIWORD(PCICFG_LOADDR(uval)), 1407 entry->memory_last); 1408 #endif 1409 pci_config_put16(handle, PCI_BCNF_MEM_BASE, 1410 PCICFG_HIWORD(PCICFG_LOADDR(uval))); 1411 1412 uval = PCICFG_ROUND_UP(entry->io_last, PCICFG_IOGRAN); 1413 if (uval != entry->io_last) { 1414 cardbus_err(dip, 8, 1415 "Adding [0x%x] before bridge (I/O)\n", 1416 uval - entry->io_last); 1417 (void) cardbus_get_io(ddi_get_parent(dip), entry, 1418 uval - entry->io_last, NULL); 1419 } 1420 cardbus_err(NULL, 8, 1421 "store 0x%02x/0x%04x(0x%x) in " 1422 "pci bridge I/O hi/low base register\n", 1423 PCICFG_HIWORD(PCICFG_LOADDR(uval)), 1424 PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(uval))), 1425 entry->io_last); 1426 /* 1427 * Program the I/O base register with the start of the I/O range 1428 */ 1429 pci_config_put8(handle, PCI_BCNF_IO_BASE_LOW, 1430 PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(uval)))); 1431 1432 pci_config_put16(handle, PCI_BCNF_IO_BASE_HI, 1433 PCICFG_HIWORD(PCICFG_LOADDR(uval))); 1434 1435 /* 1436 * Clear status bits 1437 */ 1438 pci_config_put16(handle, PCI_BCNF_SEC_STATUS, 0xffff); 1439 1440 /* 1441 * Turn off prefetchable range 1442 */ 1443 pci_config_put32(handle, PCI_BCNF_PF_BASE_LOW, 0x0000ffff); 1444 pci_config_put32(handle, PCI_BCNF_PF_BASE_HIGH, 0xffffffff); 1445 1446 pci_config_put32(handle, PCI_BCNF_PF_LIMIT_HIGH, 0x0); 1447 1448 #ifdef sparc 1449 /* 1450 * If there is an interrupt pin set program 1451 * interrupt line with default values. 1452 */ 1453 if (pci_config_get8(handle, PCI_CONF_IPIN)) { 1454 pci_config_put8(handle, PCI_CONF_ILINE, 0xf); 1455 } 1456 #else 1457 (void) cardbus_validate_iline(dip, handle); 1458 #endif 1459 1460 1461 } else if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_CARDBUS) { 1462 1463 /* 1464 * The highest bus seen during probing is 1465 * the max-subordinate bus 1466 */ 1467 pci_config_put8(handle, PCI_CBUS_SUB_BUS_NO, 1468 entry->highest_bus); 1469 1470 /* 1471 * Program the memory base register with the 1472 * start of the memory range 1473 */ 1474 #ifdef _LP64 1475 cardbus_err(NULL, 8, 1476 "store 0x%x(0x%lx) in " 1477 "cardbus memory base register 0, len 0x%lx\n", 1478 PCICFG_LOADDR(entry->memory_last), entry->memory_last, 1479 entry->memory_len); 1480 #else 1481 cardbus_err(NULL, 8, 1482 "store 0x%x(0x%llx) in " 1483 "cardbus memory base register 0, len 0x%llx\n", 1484 PCICFG_LOADDR(entry->memory_last), entry->memory_last, 1485 entry->memory_len); 1486 #endif 1487 1488 pci_config_put32(handle, PCI_CBUS_MEM_BASE0, 1489 PCICFG_LOADDR(entry->memory_last)); 1490 1491 /* 1492 * Program the I/O base register with the start of the I/O range 1493 */ 1494 cardbus_err(NULL, 8, 1495 "store 0x%x in cb IO base register 0 len 0x%x\n", 1496 PCICFG_LOADDR(entry->io_last), 1497 entry->io_len); 1498 1499 pci_config_put32(handle, PCI_CBUS_IO_BASE0, 1500 PCICFG_LOADDR(entry->io_last)); 1501 1502 /* 1503 * Clear status bits 1504 */ 1505 pci_config_put16(handle, PCI_CBUS_SEC_STATUS, 0xffff); 1506 1507 #ifdef sparc 1508 /* 1509 * If there is an interrupt pin set program 1510 * interrupt line with default values. 1511 */ 1512 if (pci_config_get8(handle, PCI_CONF_IPIN)) { 1513 pci_config_put8(handle, PCI_CONF_ILINE, 0xf); 1514 } 1515 #else 1516 (void) cardbus_validate_iline(dip, handle); 1517 #endif 1518 1519 1520 /* 1521 * LATER: use these registers 1522 */ 1523 pci_config_put32(handle, PCI_CBUS_MEM_BASE1, 0); 1524 pci_config_put32(handle, PCI_CBUS_MEM_LIMIT1, 0); 1525 pci_config_put32(handle, PCI_CBUS_IO_BASE1, 0); 1526 pci_config_put32(handle, PCI_CBUS_IO_LIMIT1, 0); 1527 } else { 1528 cmn_err(CE_WARN, "header type 0x%x, probably unknown bridge\n", 1529 header_type & PCI_HEADER_TYPE_M); 1530 } 1531 1532 cardbus_err(NULL, 7, "cardbus_setup_bridge complete\n"); 1533 } 1534 1535 static void 1536 cardbus_update_bridge(dev_info_t *dip, cardbus_phdl_t *entry, 1537 ddi_acc_handle_t handle) 1538 { 1539 uint_t length; 1540 uint16_t word16 = pci_config_get16(handle, PCI_CONF_COMM); 1541 const uint8_t header_type = pci_config_get8(handle, PCI_CONF_HEADER) 1542 & PCI_HEADER_TYPE_M; 1543 uint32_t bridge_gran; 1544 uint64_t rlval; 1545 1546 if (header_type == PCI_HEADER_CARDBUS) 1547 bridge_gran = CBCFG_MEMGRAN; 1548 else 1549 bridge_gran = PCICFG_MEMGRAN; 1550 1551 /* 1552 * Program the memory limit register with the end of the memory range 1553 */ 1554 #ifdef _LP64 1555 cardbus_err(dip, 6, 1556 "cardbus_update_bridge: Mem base 0x%lx len 0x%lx " 1557 "last 0x%lx gran 0x%x gran end 0x%lx\n", 1558 entry->memory_base, entry->memory_len, 1559 entry->memory_last, entry->memory_gran, 1560 PCICFG_ROUND_UP(entry->memory_last, entry->memory_gran)); 1561 #else 1562 cardbus_err(dip, 6, 1563 "cardbus_update_bridge: Mem base 0x%llx len 0x%llx " 1564 "last 0x%llx gran 0x%x gran end 0x%lx\n", 1565 entry->memory_base, entry->memory_len, 1566 entry->memory_last, entry->memory_gran, 1567 PCICFG_ROUND_UP(entry->memory_last, entry->memory_gran)); 1568 #endif 1569 /* 1570 * Since this is a bridge, the rest of this range will 1571 * be responded to by the bridge. We have to round up 1572 * so no other device claims it. 1573 */ 1574 length = PCICFG_ROUND_UP(entry->memory_last + cardbus_min_spare_mem, 1575 bridge_gran) - entry->memory_last; 1576 1577 if (length > 0) { 1578 /* 1579 * This is to allow space that isn't actually being used by 1580 * anything to be allocated by devices such as a downstream 1581 * PCMCIA controller. 1582 */ 1583 (void) cardbus_get_mem(dip, entry, length, NULL); 1584 cardbus_err(dip, 8, 1585 "Added [0x%x] at the top of the bridge (mem)\n", length); 1586 } 1587 1588 if (entry->memory_len) { 1589 if (header_type == PCI_HEADER_CARDBUS) { 1590 rlval = PCICFG_ROUND_DOWN(entry->memory_last - 1, 1591 CBCFG_MEMGRAN); 1592 #ifdef _LP64 1593 cardbus_err(dip, 8, 1594 "store 0x%x(0x%lx) in memory limit register 0\n", 1595 PCICFG_LOADDR(rlval), rlval); 1596 #else 1597 cardbus_err(dip, 8, 1598 "store 0x%x(0x%llx) in memory limit register 0\n", 1599 PCICFG_LOADDR(rlval), rlval); 1600 #endif 1601 pci_config_put32(handle, PCI_CBUS_MEM_LIMIT0, 1602 PCICFG_LOADDR(rlval)); 1603 } else { 1604 rlval = PCICFG_ROUND_DOWN(entry->memory_last - 1, 1605 PCICFG_MEMGRAN); 1606 #ifdef _LP64 1607 cardbus_err(dip, 8, 1608 "store 0x%x(0x%lx) in memory limit register\n", 1609 PCICFG_HIWORD(PCICFG_LOADDR(rlval)), 1610 rlval); 1611 #else 1612 cardbus_err(dip, 8, 1613 "store 0x%x(0x%llx) in memory limit register\n", 1614 PCICFG_HIWORD(PCICFG_LOADDR(rlval)), 1615 rlval); 1616 #endif 1617 pci_config_put16(handle, PCI_BCNF_MEM_LIMIT, 1618 PCICFG_HIWORD(PCICFG_LOADDR(rlval))); 1619 } 1620 word16 |= PCI_COMM_MAE; 1621 } 1622 1623 cardbus_err(dip, 6, 1624 "cardbus_update_bridge: I/O base 0x%x len 0x%x last 0x%x " 1625 "gran 0x%x gran_end 0x%lx\n", 1626 entry->io_base, entry->io_len, entry->io_last, entry->io_gran, 1627 PCICFG_ROUND_UP(entry->io_last, entry->io_gran)); 1628 1629 if (header_type == PCI_HEADER_CARDBUS) 1630 bridge_gran = CBCFG_IOGRAN; 1631 else 1632 bridge_gran = PCICFG_IOGRAN; 1633 1634 /* 1635 * Same as above for I/O space. Since this is a 1636 * bridge, the rest of this range will be responded 1637 * to by the bridge. We have to round up so no 1638 * other device claims it. 1639 */ 1640 length = PCICFG_ROUND_UP(entry->io_last + cardbus_min_spare_io, 1641 bridge_gran) - entry->io_last; 1642 if (length > 0) { 1643 (void) cardbus_get_io(dip, entry, length, NULL); 1644 cardbus_err(dip, 8, 1645 "Added [0x%x] at the top of the bridge (I/O)\n", length); 1646 } 1647 1648 /* 1649 * Program the I/O limit register with the end of the I/O range 1650 */ 1651 if (entry->io_len) { 1652 if (header_type == PCI_HEADER_CARDBUS) { 1653 rlval = PCICFG_ROUND_DOWN(entry->io_last - 1, 1654 CBCFG_IOGRAN); 1655 #ifdef _LP64 1656 cardbus_err(dip, 8, 1657 "store 0x%lx in IO limit register 0\n", rlval); 1658 #else 1659 cardbus_err(dip, 8, 1660 "store 0x%llx in IO limit register 0\n", rlval); 1661 #endif 1662 pci_config_put32(handle, PCI_CBUS_IO_LIMIT0, rlval); 1663 } else { 1664 rlval = PCICFG_ROUND_DOWN(entry->io_last - 1, 1665 PCICFG_IOGRAN); 1666 #ifdef _LP64 1667 cardbus_err(dip, 8, 1668 "store 0x%x/0x%x(0x%lx) in " 1669 "IO limit low/hi register\n", 1670 PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(rlval))), 1671 PCICFG_HIWORD(PCICFG_LOADDR(rlval)), 1672 rlval); 1673 #else 1674 cardbus_err(dip, 8, 1675 "store 0x%x/0x%x(0x%llx) in " 1676 "IO limit low/hi register\n", 1677 PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(rlval))), 1678 PCICFG_HIWORD(PCICFG_LOADDR(rlval)), 1679 rlval); 1680 #endif 1681 1682 pci_config_put8(handle, PCI_BCNF_IO_LIMIT_LOW, 1683 PCICFG_HIBYTE(PCICFG_LOWORD(PCICFG_LOADDR(rlval)))); 1684 pci_config_put16(handle, PCI_BCNF_IO_LIMIT_HI, 1685 PCICFG_HIWORD(PCICFG_LOADDR(rlval))); 1686 } 1687 word16 |= PCI_COMM_IO; 1688 } 1689 1690 pci_config_put16(handle, PCI_CONF_COMM, word16); 1691 } 1692 1693 static void 1694 cardbus_get_mem(dev_info_t *dip, cardbus_phdl_t *entry, 1695 uint32_t length, uint64_t *ans) 1696 { 1697 uint32_t hole; 1698 1699 #ifdef _LP64 1700 cardbus_err(NULL, 6, 1701 "cardbus_get_mem: memory_last 0x%lx, length 0x%x, " 1702 "memory_base 0x%lx, memory_len 0x%lx ans=0x%p\n", 1703 entry->memory_last, length, 1704 entry->memory_base, entry->memory_len, (void *) ans); 1705 #else 1706 cardbus_err(NULL, 6, 1707 "cardbus_get_mem: memory_last 0x%llx, length 0x%x, " 1708 "memory_base 0x%llx, memory_len 0x%llx ans=0x%p\n", 1709 entry->memory_last, length, 1710 entry->memory_base, entry->memory_len, (void *) ans); 1711 #endif 1712 1713 if (ans) { 1714 /* 1715 * Round up the request to the "size" boundary 1716 */ 1717 hole = PCICFG_ROUND_UP(entry->memory_last, length) 1718 - entry->memory_last; 1719 if (hole != 0) { 1720 (void) cardbus_update_available_prop(dip, 1721 PCI_ADDR_MEM32, 1722 entry->memory_last, 1723 (uint64_t)hole); 1724 entry->memory_last += hole; 1725 1726 #ifdef _LP64 1727 cardbus_err(NULL, 6, 1728 "cardbus_get_mem: " 1729 "rounded memory_last up by 0x%x to 0x%lx, ", 1730 hole, entry->memory_last); 1731 #else 1732 cardbus_err(NULL, 6, 1733 "cardbus_get_mem: " 1734 "rounded memory_last up by 0x%x to 0x%llx, ", 1735 hole, entry->memory_last); 1736 #endif 1737 } 1738 } else 1739 (void) cardbus_update_available_prop(dip, PCI_ADDR_MEM32, 1740 entry->memory_last, 1741 (uint64_t)length); 1742 1743 /* 1744 * These routines should parcel out the memory 1745 * completely. There should never be a case of 1746 * over running the bounds. 1747 */ 1748 if ((entry->memory_last + length) > 1749 (entry->memory_base + entry->memory_len)) 1750 #ifdef _LP64 1751 cardbus_err(NULL, 1, 1752 "cardbus_get_mem: assert will fail %ld <= %ld," 1753 "(0x%lx + 0x%x) <= (0x%lx + 0x%lx)\n", 1754 #else 1755 cardbus_err(NULL, 1, 1756 "cardbus_get_mem: assert will fail %lld <= %lld, " 1757 "(0x%llx + 0x%x) <= (0x%llx + 0x%llx)\n", 1758 #endif 1759 entry->memory_last + length, 1760 entry->memory_base + entry->memory_len, 1761 entry->memory_last, 1762 length, 1763 entry->memory_base, 1764 entry->memory_len); 1765 1766 ASSERT((entry->memory_last + length) <= 1767 (entry->memory_base + entry->memory_len)); 1768 /* 1769 * If ans is NULL don't return anything, 1770 * they are just asking to reserve the memory. 1771 */ 1772 if (ans != NULL) 1773 *ans = entry->memory_last; 1774 1775 /* 1776 * Increment to the next location 1777 */ 1778 entry->memory_last += length; 1779 } 1780 1781 static void 1782 cardbus_get_io(dev_info_t *dip, cardbus_phdl_t *entry, 1783 uint32_t length, uint32_t *ans) 1784 { 1785 uint32_t hole; 1786 1787 cardbus_err(NULL, 6, 1788 "cardbus_get_io: io_last 0x%x, length 0x%x, " 1789 "io_base 0x%x, io_len 0x%x ans=0x%p\n", 1790 entry->io_last, length, 1791 entry->io_base, entry->io_len, (void *) ans); 1792 1793 if (ans) { 1794 /* 1795 * Round up the request to the "size" boundary 1796 */ 1797 hole = PCICFG_ROUND_UP(entry->io_last, length) - entry->io_last; 1798 if (hole != 0) { 1799 (void) cardbus_update_available_prop(dip, PCI_ADDR_IO, 1800 (uint64_t)entry->io_last, 1801 (uint64_t)hole); 1802 entry->io_last += hole; 1803 1804 cardbus_err(NULL, 6, 1805 "cardbus_get_io: " 1806 "rounded io_last up by 0x%x to 0x%x, ", 1807 hole, entry->io_last); 1808 } 1809 } else 1810 (void) cardbus_update_available_prop(dip, PCI_ADDR_IO, 1811 (uint64_t)entry->io_last, 1812 (uint64_t)length); 1813 /* 1814 * These routines should parcel out the memory 1815 * completely. There should never be a case of 1816 * over running the bounds. 1817 */ 1818 ASSERT((entry->io_last + length) <= 1819 (entry->io_base + entry->io_len)); 1820 1821 /* 1822 * If ans is NULL don't return anything, 1823 * they are just asking to reserve the memory. 1824 */ 1825 if (ans != NULL) 1826 *ans = entry->io_last; 1827 1828 /* 1829 * Increment to the next location 1830 */ 1831 entry->io_last += length; 1832 } 1833 1834 static int 1835 cardbus_sum_resources(dev_info_t *dip, void *hdl) 1836 { 1837 cardbus_phdl_t *entry = (cardbus_phdl_t *)hdl; 1838 pci_regspec_t *pci_rp; 1839 int length; 1840 int rcount; 1841 int i, ret; 1842 ndi_ra_request_t *mem_request; 1843 ndi_ra_request_t *io_request; 1844 uint8_t header_type, base_class; 1845 ddi_acc_handle_t handle; 1846 1847 /* 1848 * Ignore the attachment point and pcs. 1849 */ 1850 if (strcmp(ddi_binding_name(dip), "hp_attachment") == 0 || 1851 strcmp(ddi_binding_name(dip), "pcs") == 0) { 1852 cardbus_err(dip, 8, "cardbus_sum_resources: Ignoring\n"); 1853 return (DDI_WALK_CONTINUE); 1854 } 1855 1856 mem_request = &entry->mem_req; 1857 io_request = &entry->io_req; 1858 1859 if (cardbus_config_setup(dip, &handle) != DDI_SUCCESS) { 1860 cardbus_err(dip, 1, 1861 "cardbus_sum_resources: Failed to map config space!\n"); 1862 entry->error = PCICFG_FAILURE; 1863 return (DDI_WALK_TERMINATE); 1864 } 1865 1866 ret = DDI_WALK_CONTINUE; 1867 header_type = pci_config_get8(handle, PCI_CONF_HEADER); 1868 base_class = pci_config_get8(handle, PCI_CONF_BASCLASS); 1869 1870 /* 1871 * If its a bridge - just record the highest bus seen 1872 */ 1873 if (base_class == PCI_CLASS_BRIDGE) { 1874 uint8_t sub_class; 1875 1876 sub_class = pci_config_get8(handle, PCI_CONF_SUBCLASS); 1877 1878 switch (sub_class) { 1879 case PCI_BRIDGE_PCI: 1880 if ((header_type & PCI_HEADER_TYPE_M) 1881 == PCI_HEADER_PPB) { 1882 1883 if (entry->highest_bus < pci_config_get8(handle, 1884 PCI_BCNF_SECBUS)) { 1885 entry->highest_bus = pci_config_get8( 1886 handle, PCI_BCNF_SECBUS); 1887 } 1888 1889 (void) cardbus_config_teardown(&handle); 1890 #if defined(CARDBUS_DEBUG) 1891 if (mem_request->ra_len != 1892 PCICFG_ROUND_UP(mem_request->ra_len, 1893 PCICFG_MEMGRAN)) { 1894 1895 #ifdef _LP64 1896 cardbus_err(dip, 8, 1897 "Pre-align [0x%lx] to PCI bridge " 1898 "memory gran " 1899 "[0x%lx] -> [0x%lx]\n", 1900 PCICFG_ROUND_UP(mem_request->ra_len, 1901 PCICFG_MEMGRAN) - 1902 mem_request->ra_len, 1903 mem_request->ra_len, 1904 PCICFG_ROUND_UP(mem_request->ra_len, 1905 PCICFG_MEMGRAN)); 1906 #else 1907 cardbus_err(dip, 8, 1908 "Pre-align [0x%llx] to PCI bridge " 1909 "memory gran " 1910 "[0x%llx] -> [0x%lx]\n", 1911 PCICFG_ROUND_UP(mem_request->ra_len, 1912 PCICFG_MEMGRAN) - 1913 mem_request->ra_len, 1914 mem_request->ra_len, 1915 PCICFG_ROUND_UP(mem_request->ra_len, 1916 PCICFG_MEMGRAN)); 1917 #endif 1918 } 1919 1920 if (io_request->ra_len != 1921 PCICFG_ROUND_UP(io_request->ra_len, 1922 PCICFG_IOGRAN)) { 1923 1924 #ifdef _LP64 1925 cardbus_err(dip, 8, 1926 "Pre-align [0x%lx] to PCI bridge " 1927 "I/O gran " 1928 "[0x%lx] -> [0x%lx]\n", 1929 PCICFG_ROUND_UP(io_request->ra_len, 1930 PCICFG_IOGRAN) - 1931 io_request->ra_len, 1932 io_request->ra_len, 1933 PCICFG_ROUND_UP(io_request->ra_len, 1934 PCICFG_IOGRAN)); 1935 #else 1936 cardbus_err(dip, 8, 1937 "Pre-align [0x%llx] to PCI bridge " 1938 "I/O gran " 1939 "[0x%llx] -> [0x%lx]\n", 1940 PCICFG_ROUND_UP(io_request->ra_len, 1941 PCICFG_IOGRAN) - 1942 io_request->ra_len, 1943 io_request->ra_len, 1944 PCICFG_ROUND_UP(io_request->ra_len, 1945 PCICFG_IOGRAN)); 1946 #endif 1947 } 1948 1949 #endif 1950 mem_request->ra_len = PCICFG_ROUND_UP( 1951 mem_request->ra_len, 1952 PCICFG_MEMGRAN); 1953 io_request->ra_len = PCICFG_ROUND_UP( 1954 io_request->ra_len, 1955 PCICFG_IOGRAN); 1956 if (entry->memory_gran < PCICFG_MEMGRAN) 1957 entry->memory_gran = PCICFG_MEMGRAN; 1958 if (entry->io_gran < PCICFG_IOGRAN) 1959 entry->io_gran = PCICFG_IOGRAN; 1960 ddi_walk_devs(ddi_get_child(dip), 1961 cardbus_sum_resources, 1962 (void *)entry); 1963 #if defined(CARDBUS_DEBUG) 1964 if (mem_request->ra_len != 1965 PCICFG_ROUND_UP(mem_request->ra_len + 1966 cardbus_min_spare_mem, PCICFG_MEMGRAN)) { 1967 1968 #ifdef _LP64 1969 cardbus_err(dip, 8, 1970 "Post-align [0x%lx] to PCI bridge " 1971 "memory gran " 1972 "[0x%lx] -> [0x%lx]\n", 1973 PCICFG_ROUND_UP( 1974 mem_request->ra_len + 1975 cardbus_min_spare_mem, 1976 PCICFG_MEMGRAN) - 1977 mem_request->ra_len, 1978 mem_request->ra_len, 1979 PCICFG_ROUND_UP(mem_request->ra_len 1980 + cardbus_min_spare_mem, 1981 PCICFG_MEMGRAN)); 1982 #else 1983 cardbus_err(dip, 8, 1984 "Post-align [0x%llx] to PCI bridge " 1985 "memory gran " 1986 "[0x%llx] -> [0x%lx]\n", 1987 PCICFG_ROUND_UP( 1988 mem_request->ra_len + 1989 cardbus_min_spare_mem, 1990 PCICFG_MEMGRAN) - 1991 mem_request->ra_len, 1992 mem_request->ra_len, 1993 PCICFG_ROUND_UP(mem_request->ra_len 1994 + cardbus_min_spare_mem, 1995 PCICFG_MEMGRAN)); 1996 #endif 1997 } 1998 1999 if (io_request->ra_len != 2000 PCICFG_ROUND_UP(io_request->ra_len + 2001 cardbus_min_spare_io, 2002 PCICFG_IOGRAN)) { 2003 2004 #ifdef _LP64 2005 cardbus_err(dip, 8, 2006 "Post-align [0x%lx] to PCI bridge " 2007 "I/O gran " 2008 "[0x%lx] -> [0x%lx]\n", 2009 PCICFG_ROUND_UP(io_request->ra_len + 2010 cardbus_min_spare_io, 2011 PCICFG_IOGRAN) - 2012 io_request->ra_len, 2013 io_request->ra_len, 2014 PCICFG_ROUND_UP(io_request->ra_len + 2015 cardbus_min_spare_io, 2016 PCICFG_IOGRAN)); 2017 #else 2018 cardbus_err(dip, 8, 2019 "Post-align [0x%llx] to PCI bridge " 2020 "I/O gran " 2021 "[0x%llx] -> [0x%lx]\n", 2022 PCICFG_ROUND_UP(io_request->ra_len + 2023 cardbus_min_spare_io, 2024 PCICFG_IOGRAN) - 2025 io_request->ra_len, 2026 io_request->ra_len, 2027 PCICFG_ROUND_UP(io_request->ra_len + 2028 cardbus_min_spare_io, 2029 PCICFG_IOGRAN)); 2030 #endif 2031 } 2032 #endif 2033 mem_request->ra_len = PCICFG_ROUND_UP( 2034 mem_request->ra_len + 2035 cardbus_min_spare_mem, 2036 PCICFG_MEMGRAN); 2037 io_request->ra_len = PCICFG_ROUND_UP( 2038 io_request->ra_len + 2039 cardbus_min_spare_io, 2040 PCICFG_IOGRAN); 2041 } 2042 return (DDI_WALK_PRUNECHILD); 2043 2044 case PCI_BRIDGE_CARDBUS: 2045 /* 2046 * Cardbus has I/O registers. 2047 */ 2048 break; 2049 2050 case PCI_BRIDGE_ISA: 2051 /* 2052 * All the registers requirements for ISA 2053 * are stored in the reg structure of the bridge. 2054 * Children of ISA are not of type PCI 2055 * so must not come through here because 2056 * cardbus_config_setup() will fail. 2057 */ 2058 ret = DDI_WALK_PRUNECHILD; 2059 break; 2060 2061 default: 2062 /* 2063 * Treat other bridges as leaf nodes. 2064 */ 2065 break; 2066 } 2067 } 2068 2069 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 2070 DDI_PROP_DONTPASS, "reg", (caddr_t)&pci_rp, 2071 &length) != DDI_PROP_SUCCESS) { 2072 /* 2073 * If one node in (the subtree of nodes) 2074 * does'nt have a "reg" property fail the 2075 * allocation. 2076 */ 2077 entry->memory_len = 0; 2078 entry->io_len = 0; 2079 entry->error = PCICFG_FAILURE; 2080 (void) cardbus_config_teardown(&handle); 2081 return (DDI_WALK_TERMINATE); 2082 } 2083 2084 /* 2085 * For each "reg" property with a length, add that to the 2086 * total memory (or I/O) to allocate. 2087 */ 2088 rcount = length / sizeof (pci_regspec_t); 2089 2090 for (i = 0; i < rcount; i++) { 2091 2092 switch (PCI_REG_ADDR_G(pci_rp[i].pci_phys_hi)) { 2093 2094 case PCI_REG_ADDR_G(PCI_ADDR_MEM32): 2095 mem_request->ra_len = 2096 pci_rp[i].pci_size_low + 2097 PCICFG_ROUND_UP(mem_request->ra_len, 2098 pci_rp[i].pci_size_low); 2099 2100 cardbus_err(dip, 8, 2101 "ADDING 32 --->0x%x for BAR@0x%x\n", 2102 pci_rp[i].pci_size_low, 2103 PCI_REG_REG_G(pci_rp[i].pci_phys_hi)); 2104 /* 2105 * the granualarity needs to be the larger of 2106 * the maximum amount of memory that we're going to 2107 * ask for, and the PCI-PCI bridge granularity (1M) 2108 */ 2109 if (pci_rp[i].pci_size_low > entry->memory_gran) 2110 entry->memory_gran = pci_rp[i].pci_size_low; 2111 break; 2112 2113 case PCI_REG_ADDR_G(PCI_ADDR_MEM64): 2114 mem_request->ra_len = 2115 pci_rp[i].pci_size_low + 2116 PCICFG_ROUND_UP(mem_request->ra_len, 2117 pci_rp[i].pci_size_low); 2118 cardbus_err(dip, 8, 2119 "ADDING 64 --->0x%x for BAR@0x%x\n", 2120 pci_rp[i].pci_size_low, 2121 PCI_REG_REG_G(pci_rp[i].pci_phys_hi)); 2122 2123 if (pci_rp[i].pci_size_low > entry->memory_gran) 2124 entry->memory_gran = pci_rp[i].pci_size_low; 2125 break; 2126 2127 case PCI_REG_ADDR_G(PCI_ADDR_IO): 2128 io_request->ra_len = 2129 pci_rp[i].pci_size_low + 2130 PCICFG_ROUND_UP(io_request->ra_len, 2131 pci_rp[i].pci_size_low); 2132 cardbus_err(dip, 8, 2133 "ADDING I/O --->0x%x for BAR@0x%x\n", 2134 pci_rp[i].pci_size_low, 2135 PCI_REG_REG_G(pci_rp[i].pci_phys_hi)); 2136 2137 if (pci_rp[i].pci_size_low > entry->io_gran) 2138 entry->io_gran = pci_rp[i].pci_size_low; 2139 break; 2140 2141 default: 2142 /* Config space register - not included */ 2143 break; 2144 } 2145 } 2146 2147 /* 2148 * free the memory allocated by ddi_getlongprop 2149 */ 2150 kmem_free(pci_rp, length); 2151 2152 /* 2153 * continue the walk to the next sibling to sum memory 2154 */ 2155 2156 (void) cardbus_config_teardown(&handle); 2157 2158 #ifdef _LP64 2159 cardbus_err(dip, 8, 2160 "Memory 0x%lx bytes, I/O 0x%lx bytes, " 2161 "Memgran 0x%x, IOgran 0x%x\n", 2162 mem_request->ra_len, io_request->ra_len, 2163 entry->memory_gran, entry->io_gran); 2164 #else 2165 cardbus_err(dip, 8, 2166 "Memory 0x%llx bytes, I/O 0x%llx bytes, " 2167 "Memgran 0x%x, IOgran 0x%x\n", 2168 mem_request->ra_len, io_request->ra_len, 2169 entry->memory_gran, entry->io_gran); 2170 #endif 2171 2172 return (ret); 2173 } 2174 2175 /* 2176 * Free resources allocated to a bridge. 2177 * Note that this routine does not call ndi_ra_free() to actually 2178 * free memory/IO/Bus. This is done as a single chunk for the entire 2179 * device tree in cardbus_free_chunk(). 2180 */ 2181 static int 2182 cardbus_free_bridge_resources(dev_info_t *dip) 2183 { 2184 cardbus_range_t *ranges; 2185 uint_t *bus; 2186 int k; 2187 int length; 2188 int i; 2189 2190 cardbus_err(dip, 6, "cardbus_free_bridge_resources\n"); 2191 2192 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 2193 DDI_PROP_DONTPASS, "ranges", (caddr_t)&ranges, 2194 &length) == DDI_PROP_SUCCESS) { 2195 for (i = 0; i < length / sizeof (cardbus_range_t); i++) { 2196 if (ranges[i].size_lo != 0 || ranges[i].size_hi != 0) { 2197 switch (ranges[i].parent_hi & PCI_REG_ADDR_M) { 2198 case PCI_ADDR_IO: 2199 cardbus_err(dip, 6, 2200 "Need to Free I/O " 2201 "base/length = [0x%x]/[0x%x]\n", 2202 ranges[i].child_lo, 2203 ranges[i].size_lo); 2204 break; 2205 2206 case PCI_ADDR_MEM32: 2207 case PCI_ADDR_MEM64: 2208 cardbus_err(dip, 6, 2209 "Need to Free Memory base/length = " 2210 "[0x%x.%x]/[0x%x]\n", 2211 ranges[i].child_mid, 2212 ranges[i].child_lo, 2213 ranges[i].size_lo); 2214 break; 2215 2216 default: 2217 cardbus_err(dip, 6, 2218 "Unknown memory space\n"); 2219 break; 2220 } 2221 } 2222 } 2223 2224 kmem_free(ranges, length); 2225 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "ranges"); 2226 } else { 2227 cardbus_err(dip, 8, 2228 "cardbus_free_bridge_resources: Failed" 2229 "to read ranges property\n"); 2230 } 2231 2232 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 2233 DDI_PROP_DONTPASS, "bus-range", (caddr_t)&bus, 2234 &k) != DDI_PROP_SUCCESS) { 2235 cardbus_err(dip, 6, "Failed to read bus-range property\n"); 2236 return (PCICFG_FAILURE); 2237 } 2238 2239 cardbus_err(dip, 6, 2240 "Need to free bus [%d] range [%d]\n", 2241 bus[0], bus[1] - bus[0] + 1); 2242 kmem_free(bus, k); 2243 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "available"); 2244 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "bus-range"); 2245 2246 return (PCICFG_SUCCESS); 2247 } 2248 2249 static int 2250 cardbus_free_device_resources(dev_info_t *dip) 2251 { 2252 pci_regspec_t *assigned; 2253 2254 int length; 2255 int acount; 2256 int i; 2257 2258 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, 2259 DDI_PROP_DONTPASS, "assigned-addresses", 2260 (caddr_t)&assigned, 2261 &length) != DDI_PROP_SUCCESS) { 2262 cardbus_err(dip, 1, 2263 "Failed to read assigned-addresses property\n"); 2264 return (PCICFG_FAILURE); 2265 } 2266 2267 /* 2268 * For each "assigned-addresses" property entry with a length, 2269 * call the memory allocation routines to return the 2270 * resource. 2271 */ 2272 acount = length / sizeof (pci_regspec_t); 2273 for (i = 0; i < acount; i++) { 2274 2275 /* 2276 * Free the resource if the size of it is not zero. 2277 */ 2278 if ((assigned[i].pci_size_low != 0)|| 2279 (assigned[i].pci_size_hi != 0)) { 2280 switch (PCI_REG_ADDR_G(assigned[i].pci_phys_hi)) { 2281 case PCI_REG_ADDR_G(PCI_ADDR_MEM32): 2282 cardbus_err(dip, 6, 2283 "Need to return 0x%x of 32 bit MEM space" 2284 " @ 0x%x from register 0x%x\n", 2285 assigned[i].pci_size_low, 2286 assigned[i].pci_phys_low, 2287 PCI_REG_REG_G(assigned[i].pci_phys_hi)); 2288 2289 break; 2290 2291 case PCI_REG_ADDR_G(PCI_ADDR_MEM64): 2292 cardbus_err(dip, 6, 2293 "Need to return 0x%x of 64 bit MEM space" 2294 " @ 0x%x.%x from register 0x%x\n", 2295 assigned[i].pci_size_low, 2296 assigned[i].pci_phys_mid, 2297 assigned[i].pci_phys_low, 2298 PCI_REG_REG_G(assigned[i].pci_phys_hi)); 2299 2300 break; 2301 2302 case PCI_REG_ADDR_G(PCI_ADDR_IO): 2303 cardbus_err(dip, 6, 2304 "Need to return 0x%x of IO space @ 0x%x" 2305 " from register 0x%x\n", 2306 assigned[i].pci_size_low, 2307 assigned[i].pci_phys_low, 2308 PCI_REG_REG_G(assigned[i].pci_phys_hi)); 2309 break; 2310 2311 default: 2312 cardbus_err(dip, 1, "Unknown register type\n"); 2313 kmem_free(assigned, length); 2314 return (PCICFG_FAILURE); 2315 } /* switch */ 2316 } 2317 } 2318 kmem_free(assigned, length); 2319 return (PCICFG_SUCCESS); 2320 } 2321 2322 static int 2323 cardbus_free_resources(dev_info_t *dip) 2324 { 2325 uint32_t classcode; 2326 2327 classcode = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 2328 "class-code", -1); 2329 /* 2330 * A different algorithim is used for bridges and leaf devices. 2331 */ 2332 if (classcode != -1) { 2333 classcode = ((uint_t)classcode & 0xffff00) >> 8; 2334 if (classcode == 0x604 || classcode == 0x607) { 2335 if (cardbus_free_bridge_resources(dip) 2336 != PCICFG_SUCCESS) { 2337 cardbus_err(dip, 1, 2338 "Failed freeing up bridge resources\n"); 2339 return (PCICFG_FAILURE); 2340 } 2341 return (PCICFG_SUCCESS); 2342 } 2343 } 2344 2345 if (cardbus_free_device_resources(dip) != PCICFG_SUCCESS) { 2346 cardbus_err(dip, 1, "Failed freeing up device resources\n"); 2347 return (PCICFG_FAILURE); 2348 } 2349 return (PCICFG_SUCCESS); 2350 } 2351 2352 static int 2353 cardbus_probe_bridge(cbus_t *cbp, dev_info_t *attpt, uint_t bus, 2354 uint_t device, uint_t func) 2355 { 2356 /* Declairations */ 2357 cardbus_bus_range_t *bus_range; 2358 int i, j; 2359 uint8_t header_type; 2360 ddi_acc_handle_t config_handle; 2361 ndi_ra_request_t req; 2362 uint_t new_bus; 2363 uint64_t blen; 2364 uint64_t next_bus; 2365 int circ; 2366 2367 cardbus_err(cbp->cb_dip, 6, 2368 "cardbus_probe_bridge bus %d device %d func %d\n", 2369 bus, device, func); 2370 2371 ndi_devi_enter(cbp->cb_dip, &circ); 2372 if (pci_config_setup(cbp->cb_dip, &config_handle) != DDI_SUCCESS) { 2373 2374 cardbus_err(cbp->cb_dip, 1, 2375 "cardbus_probe_bridge(): Failed to setup config space\n"); 2376 2377 ndi_devi_exit(cbp->cb_dip, circ); 2378 return (PCICFG_FAILURE); 2379 } 2380 2381 header_type = pci_config_get8(config_handle, PCI_CONF_HEADER); 2382 2383 /* 2384 * As soon as we have access to config space, check device 2385 * is a bridge. 2386 */ 2387 if ((header_type & PCI_HEADER_TYPE_M) != PCI_HEADER_CARDBUS) 2388 goto failed; 2389 2390 cardbus_err(cbp->cb_dip, 8, 2391 "---Vendor ID = [0x%04x]\n", 2392 pci_config_get16(config_handle, PCI_CONF_VENID)); 2393 cardbus_err(cbp->cb_dip, 8, 2394 "---Device ID = [0x%04x]\n", 2395 pci_config_get16(config_handle, PCI_CONF_DEVID)); 2396 2397 /* say what type of header */ 2398 cardbus_err(cbp->cb_dip, 8, 2399 "--%s bridge found root bus [0x%x] device [0x%x] func [0x%x]\n", 2400 ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) ? 2401 "PCI-PCI" : "Cardbus", 2402 bus, device, func); 2403 2404 if (ddi_getlongprop(DDI_DEV_T_ANY, cbp->cb_dip, 0, "bus-range", 2405 (caddr_t)&bus_range, &i) != DDI_PROP_SUCCESS) 2406 cardbus_err(cbp->cb_dip, 1, 2407 "No bus-range property seems to have been set up\n"); 2408 else { 2409 cardbus_err(cbp->cb_dip, 8, 2410 "allowable bus range is %u->%u\n", 2411 bus_range->lo, bus_range->hi); 2412 kmem_free((caddr_t)bus_range, i); 2413 } 2414 2415 /* 2416 * Get next bus in sequence and program device. 2417 */ 2418 bzero((caddr_t)&req, sizeof (ndi_ra_request_t)); 2419 req.ra_len = 1; 2420 2421 if (ndi_ra_alloc(cbp->cb_dip, &req, 2422 &next_bus, &blen, NDI_RA_TYPE_PCI_BUSNUM, 2423 NDI_RA_PASS) != NDI_SUCCESS) { 2424 cmn_err(CE_WARN, "Failed to get a bus number\n"); 2425 goto failed; 2426 } 2427 2428 new_bus = next_bus; 2429 cardbus_err(cbp->cb_dip, 8, 2430 "NEW bus found [%u]->[%u]\n", bus, new_bus); 2431 2432 (void) cardbus_set_bus_numbers(config_handle, bus, new_bus); 2433 2434 /* Enable it all */ 2435 enable_cardbus_bridge(cbp->cb_dip, config_handle); 2436 2437 /* 2438 * Probe all children devices 2439 */ 2440 for (i = 0; i < pcicfg_max_device; i++) 2441 for (j = 0; j < pcicfg_max_function; j++) 2442 switch (cardbus_probe_children(cbp, attpt, new_bus, i, 2443 j, &header_type)) { 2444 2445 case PCICFG_FAILURE: 2446 cardbus_err(cbp->cb_dip, 1, 2447 "Failed to configure bus " 2448 "[0x%x] device [0x%x] func [0x%x]\n", 2449 new_bus, i, j); 2450 disable_cardbus_bridge(cbp->cb_dip, 2451 config_handle); 2452 goto failed; 2453 2454 case PCICFG_NODEVICE: 2455 /* 2456 * if there's no function 0 2457 * there's no point in probing other 2458 * functions 2459 */ 2460 if (j != 0) 2461 break; 2462 /* FALLTHROUGH */ 2463 case PCICFG_NOMULTI: 2464 j = pcicfg_max_function; 2465 break; 2466 2467 default: 2468 break; 2469 } 2470 2471 (void) pci_config_teardown(&config_handle); 2472 (void) i_ndi_config_node(attpt, DS_LINKED, 0); 2473 ndi_devi_exit(cbp->cb_dip, circ); 2474 2475 return (PCICFG_SUCCESS); 2476 2477 failed: 2478 (void) pci_config_teardown(&config_handle); 2479 ndi_devi_exit(cbp->cb_dip, circ); 2480 2481 return (PCICFG_FAILURE); 2482 } 2483 2484 static struct isa_node isa_nodes[] = { 2485 {"dummy", {NULL, NULL, NULL, NULL, NULL}, "serial", "", 0x4e, 0x2} 2486 }; 2487 2488 static int 2489 cardbus_probe_children(cbus_t *cbp, dev_info_t *parent, uint_t bus, 2490 uint_t device, uint_t func, uint8_t *header_type) 2491 { 2492 dev_info_t *new_child; 2493 ddi_acc_handle_t config_handle; 2494 int i, j; 2495 ndi_ra_request_t req; 2496 uint64_t next_bus; 2497 uint64_t blen; 2498 uint32_t request; 2499 uint8_t base_class; 2500 uint_t new_bus; 2501 int ret; 2502 int circ; 2503 2504 cardbus_err(parent, 6, 2505 "cardbus_probe_children bus %d device %d func %d\n", 2506 bus, device, func); 2507 2508 /* 2509 * This node will be put immediately below 2510 * "parent". Allocate a blank device node. It will either 2511 * be filled in or freed up based on further probing. 2512 */ 2513 2514 ndi_devi_enter(parent, &circ); 2515 2516 if (ndi_devi_alloc(parent, DEVI_PSEUDO_NEXNAME, 2517 (pnode_t)DEVI_SID_NODEID, 2518 &new_child) != NDI_SUCCESS) { 2519 cardbus_err(parent, 1, 2520 "cardbus_probe_children(): Failed to alloc child node\n"); 2521 ndi_devi_exit(parent, circ); 2522 return (PCICFG_FAILURE); 2523 } 2524 2525 if (cardbus_add_config_reg(new_child, bus, 2526 device, func) != DDI_SUCCESS) { 2527 cardbus_err(parent, 1, 2528 "cardbus_probe_children(): Failed to add candidate REG\n"); 2529 goto failedconfig; 2530 } 2531 2532 if ((ret = cardbus_config_setup(new_child, &config_handle)) 2533 != PCICFG_SUCCESS) { 2534 2535 if (ret == PCICFG_NODEVICE) { 2536 (void) ndi_devi_free(new_child); 2537 return (ret); 2538 } 2539 cardbus_err(parent, 1, 2540 "cardbus_probe_children(): Failed to setup config space\n"); 2541 2542 goto failedconfig; 2543 } 2544 2545 base_class = pci_config_get8(config_handle, PCI_CONF_BASCLASS); 2546 2547 if (func == 0) { 2548 /* 2549 * Preserve the header type from function 0. 2550 * Additional functions may not preserve the PCI_HEADER_MULTI 2551 * bit. 2552 */ 2553 *header_type = pci_config_get8(config_handle, PCI_CONF_HEADER); 2554 } else if (!(*header_type & PCI_HEADER_MULTI) || 2555 ((*header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_PPB) || 2556 (base_class == PCI_CLASS_BRIDGE)) { 2557 2558 (void) cardbus_config_teardown(&config_handle); 2559 (void) ndi_devi_free(new_child); 2560 return (PCICFG_NOMULTI); 2561 } 2562 2563 /* 2564 * As soon as we have access to config space, 2565 * turn off device. It will get turned on 2566 * later (after memory is assigned). 2567 * not if it's a cardbus device. It may be OK to leave 2568 * it on - try LATER 2569 */ 2570 disable_cardbus_device(config_handle); 2571 2572 /* 2573 * Set 1275 properties common to all devices 2574 */ 2575 if (cardbus_set_standard_props(parent, new_child, 2576 config_handle) != PCICFG_SUCCESS) { 2577 cardbus_err(parent, 1, "Failed to set standard properties\n"); 2578 goto failedchild; 2579 } 2580 2581 /* 2582 * Child node properties NOTE: Both for PCI-PCI bridge and child node 2583 */ 2584 if (cardbus_set_childnode_props(new_child, 2585 config_handle) != PCICFG_SUCCESS) { 2586 goto failedchild; 2587 } 2588 2589 cardbus_err(parent, 8, 2590 "---Vendor ID = [0x%04x]\n", 2591 pci_config_get16(config_handle, PCI_CONF_VENID)); 2592 cardbus_err(parent, 8, 2593 "---Device ID = [0x%04x]\n", 2594 pci_config_get16(config_handle, PCI_CONF_DEVID)); 2595 2596 if (base_class == PCI_CLASS_BRIDGE) { 2597 uint8_t sub_class; 2598 2599 sub_class = pci_config_get8(config_handle, PCI_CONF_SUBCLASS); 2600 2601 switch (sub_class) { 2602 case PCI_BRIDGE_PCI: 2603 if ((*header_type & PCI_HEADER_TYPE_M) 2604 == PCI_HEADER_PPB) { 2605 cardbus_bus_range_t *bus_range; 2606 int k; 2607 2608 /* say what type of header */ 2609 cardbus_err(parent, 8, 2610 "-- Found PCI-PCI bridge @ " 2611 " bus [0x%x] device [0x%x] func [0x%x]\n", 2612 bus, device, func); 2613 2614 if (ddi_getlongprop(DDI_DEV_T_ANY, 2615 new_child, 0, "bus-range", 2616 (caddr_t)&bus_range, 2617 &k) != DDI_PROP_SUCCESS) 2618 cardbus_err(new_child, 1, 2619 "No bus-range property" 2620 " seems to have been set up\n"); 2621 else { 2622 cardbus_err(new_child, 8, 2623 "allowable bus range is %u->%u\n", 2624 bus_range->lo, bus_range->hi); 2625 kmem_free((caddr_t)bus_range, k); 2626 } 2627 2628 /* 2629 * Get next bus in sequence and program device. 2630 */ 2631 bzero((caddr_t)&req, sizeof (ndi_ra_request_t)); 2632 req.ra_len = 1; 2633 2634 if (ndi_ra_alloc(new_child, &req, 2635 &next_bus, &blen, 2636 NDI_RA_TYPE_PCI_BUSNUM, 2637 NDI_RA_PASS) != NDI_SUCCESS) { 2638 cmn_err(CE_WARN, 2639 "Failed to get a bus number\n"); 2640 goto failedchild; 2641 } 2642 2643 new_bus = next_bus; 2644 2645 cardbus_err(new_child, 8, 2646 "NEW bus found [%u]->[%u]\n", bus, new_bus); 2647 2648 /* Enable it all */ 2649 enable_pci_pci_bridge(new_child, config_handle); 2650 (void) cardbus_set_bus_numbers(config_handle, 2651 bus, new_bus); 2652 2653 #if defined(CARDBUS_DEBUG) 2654 if (cardbus_debug >= 9) { 2655 cardbus_dump_config(config_handle); 2656 } 2657 #endif 2658 2659 /* 2660 * Set bus properties 2661 */ 2662 if (cardbus_set_busnode_props(new_child) 2663 != PCICFG_SUCCESS) { 2664 cardbus_err(new_child, 1, 2665 "Failed to set busnode props\n"); 2666 disable_pci_pci_bridge(new_child, 2667 config_handle); 2668 goto failedchild; 2669 } 2670 2671 /* 2672 * Probe all children devices 2673 */ 2674 for (i = 0; i < pcicfg_max_device; i++) 2675 for (j = 0; j < pcicfg_max_function; 2676 j++) 2677 switch (cardbus_probe_children( 2678 cbp, 2679 new_child, 2680 new_bus, i, 2681 j, header_type)) { 2682 case PCICFG_FAILURE: 2683 cardbus_err(parent, 1, 2684 "Failed to " 2685 "configure " 2686 "bus [0x%x] " 2687 "device [0x%x] " 2688 "func [0x%x]\n", 2689 new_bus, i, j); 2690 disable_pci_pci_bridge( 2691 new_child, 2692 config_handle); 2693 goto failedchild; 2694 2695 case PCICFG_NODEVICE: 2696 /* 2697 * if there's no 2698 * function 0 2699 * there's no point in 2700 * probing other 2701 * functions 2702 */ 2703 if (j != 0) 2704 break; 2705 /* FALLTHROUGH */ 2706 case PCICFG_NOMULTI: 2707 j = pcicfg_max_function; 2708 break; 2709 2710 default: 2711 break; 2712 } 2713 } 2714 break; 2715 2716 case PCI_BRIDGE_CARDBUS: 2717 cardbus_err(parent, 8, 2718 "--Found Cardbus bridge @ " 2719 "bus [0x%x] device [0x%x] func [0x%x]\n", 2720 bus, device, func); 2721 pci_config_put32(config_handle, 2722 PCI_CONF_BASE0, 0xffffffff); 2723 2724 request = pci_config_get32(config_handle, 2725 PCI_CONF_BASE0); 2726 2727 /* 2728 * If its a zero length, don't do 2729 * any programming. 2730 */ 2731 if (request != 0) { 2732 if (request == (uint32_t)0xffffffff) { 2733 cmn_err(CE_WARN, 2734 "cardbus_probe_children: " 2735 "can't access device"); 2736 goto failedchild; 2737 } 2738 /* 2739 * Add to the "reg" property 2740 */ 2741 if (cardbus_update_reg_prop(new_child, 2742 request, 2743 PCI_CONF_BASE0) != PCICFG_SUCCESS) { 2744 goto failedchild; 2745 } 2746 cardbus_err(parent, 8, 2747 "BASE register [0x%x] asks for " 2748 "[0x%x]=[0x%x](32)\n", 2749 PCI_CONF_BASE0, request, 2750 (~(PCI_BASE_M_ADDR_M & request))+1); 2751 } 2752 break; 2753 2754 case PCI_BRIDGE_ISA: 2755 cardbus_err(parent, 8, 2756 "--Found ISA bridge @ " 2757 "bus [0x%x] device [0x%x] func [0x%x]\n", 2758 bus, device, func); 2759 enable_pci_isa_bridge(new_child, config_handle); 2760 2761 #if defined(CARDBUS_DEBUG) 2762 if (cardbus_debug >= 4) { 2763 cardbus_dump_common_config(config_handle); 2764 cardbus_err(NULL, 1, 2765 " DDMA SlvCh0 = [0x%04x] " 2766 "DDMA SlvCh1 = [0x%04x]\n", 2767 pci_config_get16(config_handle, 0x40), 2768 pci_config_get16(config_handle, 0x42)); 2769 cardbus_err(NULL, 1, 2770 " DDMA SlvCh2 = [0x%04x] " 2771 "DDMA SlvCh3 = [0x%04x]\n", 2772 pci_config_get16(config_handle, 0x44), 2773 pci_config_get16(config_handle, 0x46)); 2774 cardbus_err(NULL, 1, 2775 " DDMA SlvCh5 = [0x%04x] " 2776 "DDMA SlvCh6 = [0x%04x]\n", 2777 pci_config_get16(config_handle, 0x4a), 2778 pci_config_get16(config_handle, 0x4c)); 2779 cardbus_err(NULL, 1, 2780 " DDMA SlvCh7 = [0x%04x] " 2781 "Misc Cntrl = [0x%02x]\n", 2782 pci_config_get16(config_handle, 0x4e), 2783 pci_config_get8(config_handle, 0x57)); 2784 cardbus_err(NULL, 1, 2785 " DMA Cntl = [0x%02x] " 2786 "DMA TyF Tim = [0x%02x]\n", 2787 pci_config_get8(config_handle, 0x48), 2788 pci_config_get8(config_handle, 0x49)); 2789 cardbus_err(NULL, 1, 2790 " TimCntrl = [0x%02x] " 2791 "MTOP = [0x%02x]\n", 2792 pci_config_get8(config_handle, 0x50), 2793 pci_config_get8(config_handle, 0x51)); 2794 cardbus_err(NULL, 1, 2795 " MDMA Access = [0x%02x] " 2796 "ROMCS = [0x%02x]\n", 2797 pci_config_get8(config_handle, 0x52), 2798 pci_config_get8(config_handle, 0x53)); 2799 cardbus_err(NULL, 1, 2800 " Dscrd Tmr = [0x%02x] " 2801 "Retry Tmr = [0x%02x]\n", 2802 pci_config_get8(config_handle, 0x55), 2803 pci_config_get8(config_handle, 0x54)); 2804 cardbus_err(NULL, 1, 2805 " I/O Spc 0 = [0x%08x] " 2806 "I/O Spc 1 = [0x%08x]\n", 2807 pci_config_get32(config_handle, 0x58), 2808 pci_config_get32(config_handle, 0x5c)); 2809 cardbus_err(NULL, 1, 2810 " I/O Spc 2 = [0x%08x] " 2811 "I/O Spc 3 = [0x%08x]\n", 2812 pci_config_get32(config_handle, 0x60), 2813 pci_config_get32(config_handle, 0x64)); 2814 cardbus_err(NULL, 1, 2815 " I/O Spc 4 = [0x%08x] " 2816 "I/O Spc 5 = [0x%08x]\n", 2817 pci_config_get32(config_handle, 0x68), 2818 pci_config_get32(config_handle, 0x6c)); 2819 cardbus_err(NULL, 1, 2820 " Mem Spc 0 = [0x%08x] " 2821 "Mem Spc 1 = [0x%08x]\n", 2822 pci_config_get32(config_handle, 0x70), 2823 pci_config_get32(config_handle, 0x74)); 2824 cardbus_err(NULL, 1, 2825 " Mem Spc 2 = [0x%08x] " 2826 "Mem Spc 3 = [0x%08x]\n", 2827 pci_config_get32(config_handle, 0x78), 2828 pci_config_get32(config_handle, 0x7c)); 2829 } 2830 #endif 2831 /* 2832 * Set bus properties 2833 */ 2834 if (cardbus_set_busnode_isaprops(new_child) 2835 != PCICFG_SUCCESS) { 2836 cardbus_err(new_child, 1, 2837 "Failed to set busnode props\n"); 2838 disable_cardbus_device(config_handle); 2839 goto failedchild; 2840 } 2841 2842 /* 2843 * Add to the "reg" property. 2844 * Simply grab 1K of I/O space. 2845 */ 2846 if (cardbus_update_reg_prop(new_child, 2847 0xfffffc00 | PCI_BASE_SPACE_IO, 2848 PCI_CONF_BASE0) != PCICFG_SUCCESS) { 2849 goto failedchild; 2850 } 2851 2852 /* 2853 * Probe all potential children devices. 2854 */ 2855 for (i = 0; 2856 i < sizeof (isa_nodes) / sizeof (isa_nodes[0]); 2857 i++) 2858 switch (cardbus_add_isa_node(cbp, new_child, 2859 &isa_nodes[i])) { 2860 case PCICFG_FAILURE: 2861 cardbus_err(parent, 1, 2862 "Failed to configure isa bus\n"); 2863 disable_cardbus_device(config_handle); 2864 goto failedchild; 2865 2866 case PCICFG_NODEVICE: 2867 continue; 2868 } 2869 2870 break; 2871 2872 case PCI_BRIDGE_OTHER: 2873 default: 2874 cardbus_err(parent, 8, 2875 "--Found unknown bridge, subclass 0x%x @ " 2876 "bus [0x%x] device [0x%x] func [0x%x]\n", 2877 sub_class, bus, device, func); 2878 goto leaf_node; 2879 } 2880 } else { 2881 cardbus_err(parent, 8, 2882 "--Leaf device found " 2883 "bus [0x%x] device [0x%x] func [0x%x]\n", 2884 bus, device, func); 2885 /* 2886 * Ethernet devices. 2887 */ 2888 if (strcmp(ddi_binding_name(new_child), "ethernet") == 0) { 2889 extern int localetheraddr(struct ether_addr *, 2890 struct ether_addr *); 2891 uchar_t mac[6]; 2892 2893 cardbus_force_stringprop(new_child, 2894 "device_type", "network"); 2895 2896 if (localetheraddr(NULL, (struct ether_addr *)mac)) { 2897 (void) ddi_prop_create(DDI_DEV_T_NONE, 2898 new_child, 2899 DDI_PROP_CANSLEEP, "local-mac-address", 2900 (caddr_t)mac, 6); 2901 } 2902 } 2903 leaf_node: 2904 if (cbp->cb_dsp) { 2905 struct cb_deviceset_props *cdsp = cbp->cb_dsp; 2906 uint16_t venid = pci_config_get16(config_handle, 2907 PCI_CONF_VENID); 2908 uint16_t devid = pci_config_get16(config_handle, 2909 PCI_CONF_DEVID); 2910 ddi_prop_t *propp; 2911 2912 for (cdsp = cbp->cb_dsp; cdsp; cdsp = cdsp->next) { 2913 if (cdsp->binding_name && 2914 strcmp(ddi_binding_name(new_child), 2915 cdsp->binding_name)) 2916 continue; 2917 if (cdsp->venid && (cdsp->venid != venid)) 2918 continue; 2919 if (cdsp->devid && (cdsp->devid != devid)) 2920 continue; 2921 if (cdsp->nodename) { 2922 if (ndi_devi_set_nodename(new_child, 2923 cdsp->nodename, 2924 0) != NDI_SUCCESS) 2925 cardbus_err(new_child, 1, 2926 "Failed to set nodename\n"); 2927 } 2928 for (propp = cdsp->prop_list; propp; 2929 propp = propp->prop_next) { 2930 switch (propp->prop_flags) { 2931 case DDI_PROP_TYPE_INT: 2932 cardbus_force_intprop( 2933 new_child, 2934 propp->prop_name, 2935 (int *)propp->prop_val, 2936 propp->prop_len); 2937 break; 2938 case DDI_PROP_TYPE_STRING: 2939 cardbus_force_stringprop( 2940 new_child, 2941 propp->prop_name, 2942 (char *)propp->prop_val); 2943 break; 2944 case DDI_PROP_TYPE_ANY: 2945 cardbus_force_boolprop( 2946 new_child, 2947 propp->prop_name); 2948 break; 2949 } 2950 } 2951 } 2952 } 2953 2954 #if defined(CARDBUS_DEBUG) 2955 if (cardbus_debug >= 9) { 2956 cardbus_dump_config(config_handle); 2957 } 2958 #endif 2959 2960 i = PCI_CONF_BASE0; 2961 2962 while (i <= PCI_CONF_BASE5) { 2963 pci_config_put32(config_handle, i, 0xffffffff); 2964 2965 request = pci_config_get32(config_handle, i); 2966 2967 /* 2968 * If its a zero length, don't do 2969 * any programming. 2970 */ 2971 if (request != 0) { 2972 if (request == (uint32_t)0xffffffff) { 2973 cmn_err(CE_WARN, 2974 "cardbus_probe_children: " 2975 "can't access device"); 2976 goto failedchild; 2977 } 2978 /* 2979 * Add to the "reg" property 2980 */ 2981 if (cardbus_update_reg_prop(new_child, 2982 request, i) != PCICFG_SUCCESS) { 2983 goto failedchild; 2984 } 2985 } else { 2986 cardbus_err(parent, 8, "All memory found\n"); 2987 break; 2988 } 2989 2990 /* 2991 * Increment by eight if it is 64 bit address space 2992 * only if memory space 2993 */ 2994 if (((PCI_BASE_TYPE_M & request) 2995 == PCI_BASE_TYPE_ALL) && 2996 ((PCI_BASE_SPACE_M & request) 2997 == PCI_BASE_SPACE_MEM)) { 2998 cardbus_err(parent, 8, 2999 "BASE register [0x%x] asks for " 3000 "[0x%x]=[0x%x] (64)\n", 3001 i, request, 3002 (~(PCI_BASE_M_ADDR_M & request))+1); 3003 i += 8; 3004 } else { 3005 cardbus_err(parent, 8, 3006 "BASE register [0x%x] asks for " 3007 "[0x%x]=[0x%x](32)\n", 3008 i, request, 3009 (~(PCI_BASE_M_ADDR_M & request))+1); 3010 i += 4; 3011 } 3012 } 3013 3014 /* 3015 * Get the ROM size and create register for it 3016 */ 3017 pci_config_put32(config_handle, PCI_CONF_ROM, 0xffffffff); 3018 3019 request = pci_config_get32(config_handle, PCI_CONF_ROM); 3020 /* 3021 * If its a zero length, don't do 3022 * any programming. 3023 */ 3024 3025 if (request != 0) { 3026 cardbus_err(parent, 9, 3027 "BASE register [0x%x] asks for " 3028 "[0x%x]=[0x%x] (ROM)\n", 3029 PCI_CONF_ROM, request, 3030 (~(PCI_BASE_ROM_ADDR_M & request))+1); 3031 /* 3032 * Add to the "reg" property 3033 */ 3034 if (cardbus_update_reg_prop(new_child, 3035 request, 3036 PCI_CONF_ROM) != PCICFG_SUCCESS) { 3037 goto failedchild; 3038 } 3039 } 3040 } 3041 3042 (void) cardbus_config_teardown(&config_handle); 3043 3044 /* 3045 * Attach the child to its parent 3046 */ 3047 (void) i_ndi_config_node(new_child, DS_LINKED, 0); 3048 ndi_devi_exit(parent, circ); 3049 3050 return (PCICFG_SUCCESS); 3051 failedchild: 3052 /* 3053 * check if it should be taken offline (if online) 3054 */ 3055 (void) cardbus_config_teardown(&config_handle); 3056 3057 failedconfig: 3058 3059 (void) ndi_devi_free(new_child); 3060 ndi_devi_exit(parent, circ); 3061 3062 return (PCICFG_FAILURE); 3063 } 3064 3065 static int 3066 cardbus_add_config_reg(dev_info_t *dip, 3067 uint_t bus, uint_t device, uint_t func) 3068 { 3069 int reg[10] = { PCI_ADDR_CONFIG, 0, 0, 0, 0}; 3070 3071 reg[0] = PCICFG_MAKE_REG_HIGH(bus, device, func, 0); 3072 3073 return (ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 3074 "reg", reg, 5)); 3075 } 3076 3077 static int 3078 cardbus_add_isa_node(cbus_t *cbp, dev_info_t *parent, struct isa_node *node) 3079 { 3080 dev_info_t *new_child; 3081 int ret; 3082 uint32_t reg[3]; 3083 3084 _NOTE(ARGUNUSED(cbp)) 3085 3086 cardbus_err(parent, 6, "cardbus_add_isa_node\n"); 3087 3088 /* 3089 * This node will be put immediately below 3090 * "parent". Allocate a blank device node. 3091 */ 3092 if (ndi_devi_alloc(parent, DEVI_PSEUDO_NEXNAME, 3093 (pnode_t)DEVI_SID_NODEID, 3094 &new_child) != NDI_SUCCESS) { 3095 cardbus_err(parent, 1, 3096 "cardbus_add_isa_child(): Failed to alloc child node\n"); 3097 return (PCICFG_FAILURE); 3098 } 3099 3100 /* 3101 * Set properties common to ISA devices 3102 */ 3103 if (cardbus_set_isa_props(parent, new_child, node->name, 3104 node->compatible) != PCICFG_SUCCESS) { 3105 cardbus_err(parent, 1, "Failed to set ISA properties\n"); 3106 goto failed; 3107 } 3108 3109 cardbus_err(new_child, 8, "--Leaf ISA device\n"); 3110 3111 /* 3112 * Add the "reg" property. 3113 */ 3114 reg[0] = 0; 3115 reg[1] = node->reg; 3116 reg[2] = node->span; 3117 3118 ret = ndi_prop_update_int_array(DDI_DEV_T_NONE, new_child, 3119 "basereg", (int *)reg, 3); 3120 if (ret != DDI_SUCCESS) 3121 goto failed; 3122 3123 (void) i_ndi_config_node(new_child, DS_LINKED, 0); 3124 3125 return (PCICFG_SUCCESS); 3126 3127 failed: 3128 (void) ndi_devi_free(new_child); 3129 3130 return (PCICFG_FAILURE); 3131 } 3132 3133 static int 3134 cardbus_config_setup(dev_info_t *dip, ddi_acc_handle_t *handle) 3135 { 3136 caddr_t cfgaddr; 3137 ddi_device_acc_attr_t attr; 3138 dev_info_t *anode; 3139 int status; 3140 int rlen; 3141 pci_regspec_t *reg; 3142 int ret; 3143 #ifdef sparc 3144 int16_t val; 3145 #endif 3146 3147 cardbus_err(dip, 10, 3148 "cardbus_config_setup(dip=0x%p)\n", (void *) dip); 3149 3150 /* 3151 * Get the pci register spec from the node 3152 */ 3153 status = ddi_getlongprop(DDI_DEV_T_NONE, 3154 dip, DDI_PROP_DONTPASS, "reg", 3155 (caddr_t)®, &rlen); 3156 3157 cardbus_err(dip, 10, 3158 "cardbus_config_setup, reg = 0x%p\n", (void *) reg); 3159 3160 switch (status) { 3161 case DDI_PROP_SUCCESS: 3162 break; 3163 case DDI_PROP_NO_MEMORY: 3164 cardbus_err(dip, 1, "reg present, but unable to get memory\n"); 3165 return (PCICFG_FAILURE); 3166 default: 3167 cardbus_err(dip, 1, "no reg property\n"); 3168 return (PCICFG_FAILURE); 3169 } 3170 3171 anode = dip; 3172 3173 /* 3174 * Find the attachment point node 3175 */ 3176 while ((anode != NULL) && (strcmp(ddi_binding_name(anode), 3177 "hp_attachment") != 0)) { 3178 anode = ddi_get_parent(anode); 3179 } 3180 3181 if (anode == NULL) { 3182 cardbus_err(dip, 1, "Tree not in PROBE state\n"); 3183 kmem_free((caddr_t)reg, rlen); 3184 return (PCICFG_FAILURE); 3185 } 3186 3187 if ((ret = ndi_prop_update_int_array(DDI_DEV_T_NONE, anode, 3188 "reg", (int *)reg, 5)) != 0) { 3189 cardbus_err(dip, 1, 3190 "Failed to update reg property, error code %d\n", ret); 3191 kmem_free((caddr_t)reg, rlen); 3192 return (PCICFG_FAILURE); 3193 } 3194 3195 attr.devacc_attr_version = DDI_DEVICE_ATTR_V0; 3196 attr.devacc_attr_endian_flags = DDI_STRUCTURE_LE_ACC; 3197 attr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 3198 3199 if (ddi_regs_map_setup(anode, 0, &cfgaddr, 3200 0, /* PCI_CONF_HDR_SIZE */ 3201 0, 3202 &attr, handle) != DDI_SUCCESS) { 3203 cardbus_err(dip, 1, 3204 "Failed to setup registers for [0x%x][0x%x][0x%x]\n", 3205 PCI_REG_BUS_G(reg->pci_phys_hi), 3206 PCI_REG_DEV_G(reg->pci_phys_hi), 3207 PCI_REG_FUNC_G(reg->pci_phys_hi)); 3208 kmem_free((caddr_t)reg, rlen); 3209 return (PCICFG_FAILURE); 3210 } 3211 3212 cardbus_err(dip, 9, 3213 "PROBING =>->->->->->-> [0x%x][0x%x][0x%x] 0x%x 0x%p\n", 3214 PCI_REG_BUS_G(reg->pci_phys_hi), 3215 PCI_REG_DEV_G(reg->pci_phys_hi), 3216 PCI_REG_FUNC_G(reg->pci_phys_hi), 3217 reg->pci_phys_hi, (void *) cfgaddr); 3218 3219 /* 3220 * must do peek16 otherwise the system crashes when probing 3221 * a non zero function on a non-multi-function card. 3222 */ 3223 #ifdef sparc 3224 if (ddi_peek16(anode, (int16_t *)cfgaddr, &val) != DDI_SUCCESS) { 3225 cardbus_err(dip, 8, 3226 "cardbus_config_setup peek failed\n"); 3227 ret = PCICFG_NODEVICE; 3228 } else if (ddi_get16(*handle, (uint16_t *)cfgaddr) == 0xffff) { 3229 cardbus_err(dip, 8, 3230 "cardbus_config_setup PCICFG_NODEVICE\n"); 3231 ret = PCICFG_NODEVICE; 3232 #elif defined(__x86) || defined(__amd64) 3233 if (ddi_get16(*handle, (uint16_t *)cfgaddr) == 0xffff) { 3234 cardbus_err(dip, 8, 3235 "cardbus_config_setup PCICFG_NODEVICE\n"); 3236 ret = PCICFG_NODEVICE; 3237 #endif 3238 } else { 3239 cardbus_err(dip, 1, 3240 "cardbus_config_setup found device at:[0x%x][0x%x][0x%x]\n", 3241 PCI_REG_BUS_G(reg->pci_phys_hi), 3242 PCI_REG_DEV_G(reg->pci_phys_hi), 3243 PCI_REG_FUNC_G(reg->pci_phys_hi)); 3244 3245 ret = PCICFG_SUCCESS; 3246 } 3247 3248 kmem_free((caddr_t)reg, rlen); 3249 if (ret != PCICFG_SUCCESS) { 3250 cardbus_config_teardown(handle); 3251 } 3252 3253 cardbus_err(dip, 7, 3254 "cardbus_config_setup returning %d\n", ret); 3255 3256 return (ret); 3257 } 3258 3259 static void 3260 cardbus_config_teardown(ddi_acc_handle_t *handle) 3261 { 3262 (void) ddi_regs_map_free(handle); 3263 } 3264 3265 static void 3266 cardbus_reparent_children(dev_info_t *dip, dev_info_t *parent) 3267 { 3268 dev_info_t *child; 3269 int circ; 3270 3271 while (child = ddi_get_child(dip)) { 3272 ASSERT(i_ddi_node_state(child) <= DS_LINKED); 3273 /* 3274 * Unlink node from tree before reparenting 3275 */ 3276 ndi_devi_enter(dip, &circ); 3277 (void) i_ndi_unconfig_node(child, DS_PROTO, 0); 3278 ndi_devi_exit(dip, circ); 3279 DEVI(child)->devi_parent = DEVI(parent); 3280 DEVI(child)->devi_bus_ctl = DEVI(parent); 3281 ndi_devi_enter(parent, &circ); 3282 (void) i_ndi_config_node(child, DS_LINKED, 0); 3283 ndi_devi_exit(parent, circ); 3284 } 3285 } 3286 3287 static int 3288 cardbus_update_assigned_prop(dev_info_t *dip, pci_regspec_t *newone) 3289 { 3290 int alen; 3291 pci_regspec_t *assigned; 3292 caddr_t newreg; 3293 uint_t status; 3294 3295 status = ddi_getlongprop(DDI_DEV_T_NONE, dip, DDI_PROP_DONTPASS, 3296 "assigned-addresses", (caddr_t)&assigned, &alen); 3297 switch (status) { 3298 case DDI_PROP_SUCCESS: 3299 cardbus_err(dip, 5, 3300 "cardbus_update_assigned_prop: found prop len %d\n", 3301 alen); 3302 /* 3303 * Allocate memory for the existing 3304 * assigned-addresses(s) plus one and then 3305 * build it. 3306 */ 3307 newreg = kmem_zalloc(alen+sizeof (*newone), KM_SLEEP); 3308 3309 bcopy(assigned, newreg, alen); 3310 bcopy(newone, newreg + alen, sizeof (*newone)); 3311 break; 3312 3313 case DDI_PROP_NO_MEMORY: 3314 cardbus_err(dip, 1, 3315 "no memory for assigned-addresses property\n"); 3316 return (PCICFG_FAILURE); 3317 3318 default: 3319 cardbus_err(dip, 5, 3320 "cardbus_update_assigned_prop: creating prop\n"); 3321 alen = 0; 3322 newreg = (caddr_t)newone; 3323 break; 3324 } 3325 3326 /* 3327 * Write out the new "assigned-addresses" spec 3328 */ 3329 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 3330 "assigned-addresses", (int *)newreg, 3331 (alen + sizeof (*newone))/sizeof (int)); 3332 3333 if (status == DDI_PROP_SUCCESS) 3334 kmem_free((caddr_t)newreg, alen+sizeof (*newone)); 3335 3336 if (alen) 3337 kmem_free(assigned, alen); 3338 3339 return (PCICFG_SUCCESS); 3340 } 3341 3342 static int 3343 cardbus_update_available_prop(dev_info_t *dip, uint32_t hi_type, 3344 uint64_t base, uint64_t size) 3345 { 3346 int alen, rlen; 3347 pci_regspec_t *available, *reg; 3348 pci_regspec_t addition; 3349 caddr_t newreg; 3350 uint_t status; 3351 3352 cardbus_err(dip, 6, "cardbus_update_available_prop\n"); 3353 3354 status = ddi_getlongprop(DDI_DEV_T_NONE, dip, DDI_PROP_DONTPASS, 3355 "reg", (caddr_t)®, &rlen); 3356 3357 switch (status) { 3358 case DDI_PROP_SUCCESS: 3359 break; 3360 case DDI_PROP_NO_MEMORY: 3361 cardbus_err(dip, 1, "reg present, but unable to get memory\n"); 3362 return (PCICFG_FAILURE); 3363 default: 3364 cardbus_err(dip, 1, "no reg property\n"); 3365 return (PCICFG_FAILURE); 3366 } 3367 3368 status = ddi_getlongprop(DDI_DEV_T_NONE, dip, DDI_PROP_DONTPASS, 3369 "available", (caddr_t)&available, &alen); 3370 switch (status) { 3371 case DDI_PROP_SUCCESS: 3372 break; 3373 case DDI_PROP_NO_MEMORY: 3374 cardbus_err(dip, 1, "no memory for available property\n"); 3375 kmem_free((caddr_t)reg, rlen); 3376 return (PCICFG_FAILURE); 3377 default: 3378 alen = 0; 3379 } 3380 3381 /* 3382 * Allocate memory for the existing 3383 * available(s) plus one and then 3384 * build it. 3385 */ 3386 newreg = kmem_zalloc(alen + sizeof (pci_regspec_t), KM_SLEEP); 3387 3388 /* 3389 * Build the regspec, then add it to the existing one(s) 3390 */ 3391 addition.pci_phys_hi = hi_type | 3392 PCICFG_MAKE_REG_HIGH(PCI_REG_BUS_G(reg->pci_phys_hi), 3393 PCI_REG_DEV_G(reg->pci_phys_hi), 3394 PCI_REG_FUNC_G(reg->pci_phys_hi), 0); 3395 3396 addition.pci_phys_mid = (uint32_t)((base>>32) & 0xffffffff); 3397 addition.pci_phys_low = (uint32_t)(base & 0xffffffff); 3398 addition.pci_size_hi = (uint32_t)((size>>32) & 0xffffffff); 3399 addition.pci_size_low = (uint32_t)(size & 0xffffffff); 3400 3401 #ifdef DEBUG 3402 cardbus_dump_reg(dip, &addition, 1); 3403 #endif 3404 3405 if (alen) 3406 bcopy(available, newreg, alen); 3407 bcopy(&addition, newreg + alen, sizeof (pci_regspec_t)); 3408 3409 /* 3410 * Write out the new "available" spec 3411 */ 3412 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 3413 "available", (int *)newreg, 3414 (alen + sizeof (pci_regspec_t))/sizeof (int)); 3415 3416 if (alen) 3417 kmem_free((caddr_t)available, alen); 3418 kmem_free((caddr_t)reg, rlen); 3419 kmem_free((caddr_t)newreg, alen + sizeof (pci_regspec_t)); 3420 3421 return (PCICFG_SUCCESS); 3422 } 3423 3424 static int 3425 cardbus_update_ranges_prop(dev_info_t *dip, cardbus_range_t *addition) 3426 { 3427 int rlen; 3428 cardbus_range_t *ranges; 3429 caddr_t newreg; 3430 uint_t status; 3431 #if defined(CARDBUS_DEBUG) 3432 int i, nrange; 3433 const cardbus_range_t *nr; 3434 #endif 3435 3436 cardbus_err(dip, 6, "cardbus_update_ranges_prop\n"); 3437 3438 status = ddi_getlongprop(DDI_DEV_T_NONE, 3439 dip, DDI_PROP_DONTPASS, "ranges", 3440 (caddr_t)&ranges, &rlen); 3441 3442 switch (status) { 3443 case DDI_PROP_SUCCESS: 3444 break; 3445 case DDI_PROP_NO_MEMORY: 3446 cardbus_err(dip, 1, 3447 "ranges present, but unable to get memory\n"); 3448 return (PCICFG_FAILURE); 3449 default: 3450 cardbus_err(dip, 8, "no ranges property - creating one\n"); 3451 if (ndi_prop_update_int_array(DDI_DEV_T_NONE, 3452 dip, "ranges", (int *)addition, 3453 sizeof (cardbus_range_t)/sizeof (int)) 3454 != DDI_SUCCESS) { 3455 cardbus_err(dip, 1, "Did'nt create ranges property\n"); 3456 return (PCICFG_FAILURE); 3457 } 3458 return (PCICFG_SUCCESS); 3459 } 3460 3461 /* 3462 * Allocate memory for the existing reg(s) plus one and then 3463 * build it. 3464 */ 3465 newreg = kmem_zalloc(rlen+sizeof (cardbus_range_t), KM_SLEEP); 3466 3467 bcopy(ranges, newreg, rlen); 3468 bcopy(addition, newreg + rlen, sizeof (cardbus_range_t)); 3469 3470 /* 3471 * Write out the new "ranges" property 3472 */ 3473 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, 3474 dip, "ranges", (int *)newreg, 3475 (rlen + sizeof (cardbus_range_t))/sizeof (int)); 3476 3477 #if defined(CARDBUS_DEBUG) 3478 cardbus_err(dip, 8, "cardbus_update_ranges_prop ranges property:\n"); 3479 3480 nrange = rlen / sizeof (cardbus_range_t); 3481 nr = (cardbus_range_t *)newreg; 3482 for (i = 0; i <= nrange; i++) { 3483 /* nrange is one higher for new entry */ 3484 cardbus_err(dip, 9, 3485 "\trange parent addr 0x%x.0x%x.0x%x " 3486 "child addr 0x%x.0x%x.0x%x size 0x%x.0x%x\n", 3487 nr->parent_hi, 3488 nr->parent_mid, nr->parent_lo, 3489 nr->child_hi, 3490 nr->child_mid, nr->child_lo, 3491 nr->size_hi, nr->size_lo); 3492 nr++; 3493 } 3494 #endif 3495 3496 kmem_free((caddr_t)newreg, rlen+sizeof (cardbus_range_t)); 3497 kmem_free((caddr_t)ranges, rlen); 3498 3499 return (PCICFG_SUCCESS); 3500 } 3501 3502 static int 3503 cardbus_update_reg_prop(dev_info_t *dip, uint32_t regvalue, uint_t reg_offset) 3504 { 3505 int rlen; 3506 pci_regspec_t *reg; 3507 caddr_t newreg; 3508 uint32_t hiword; 3509 pci_regspec_t addition; 3510 uint32_t size; 3511 uint_t status; 3512 3513 status = ddi_getlongprop(DDI_DEV_T_NONE, 3514 dip, DDI_PROP_DONTPASS, "reg", (caddr_t)®, &rlen); 3515 3516 switch (status) { 3517 case DDI_PROP_SUCCESS: 3518 break; 3519 case DDI_PROP_NO_MEMORY: 3520 cardbus_err(dip, 1, "reg present, but unable to get memory\n"); 3521 return (PCICFG_FAILURE); 3522 default: 3523 cardbus_err(dip, 1, "no reg property\n"); 3524 return (PCICFG_FAILURE); 3525 } 3526 3527 /* 3528 * Allocate memory for the existing reg(s) plus one and then 3529 * build it. 3530 */ 3531 newreg = kmem_zalloc(rlen+sizeof (pci_regspec_t), KM_SLEEP); 3532 3533 /* 3534 * Build the regspec, then add it to the existing one(s) 3535 */ 3536 hiword = PCICFG_MAKE_REG_HIGH(PCI_REG_BUS_G(reg->pci_phys_hi), 3537 PCI_REG_DEV_G(reg->pci_phys_hi), 3538 PCI_REG_FUNC_G(reg->pci_phys_hi), 3539 reg_offset); 3540 3541 if (reg_offset == PCI_CONF_ROM) { 3542 size = (~(PCI_BASE_ROM_ADDR_M & regvalue))+1; 3543 hiword |= PCI_ADDR_MEM32; 3544 } else { 3545 size = (~(PCI_BASE_M_ADDR_M & regvalue))+1; 3546 3547 if ((PCI_BASE_SPACE_M & regvalue) == PCI_BASE_SPACE_MEM) { 3548 if ((PCI_BASE_TYPE_M & regvalue) == PCI_BASE_TYPE_MEM) { 3549 hiword |= PCI_ADDR_MEM32; 3550 } else if ((PCI_BASE_TYPE_M & regvalue) 3551 == PCI_BASE_TYPE_ALL) { 3552 /* 3553 * This is a 64 bit PCI memory space. 3554 * It needs to be allocated as 32 bit 3555 * for bus map purposes. 3556 */ 3557 hiword |= PCI_ADDR_MEM32; 3558 } 3559 } else { 3560 hiword |= PCI_ADDR_IO; 3561 } 3562 } 3563 3564 addition.pci_phys_hi = hiword; 3565 addition.pci_phys_mid = 0; 3566 addition.pci_phys_low = 0; 3567 addition.pci_size_hi = 0; 3568 addition.pci_size_low = size; 3569 3570 cardbus_err(dip, 8, 3571 "cardbus_update_reg_prop, phys_hi 0x%08x," 3572 " phys_mid 0x%08x, phys_low 0x%08x, size_hi 0x%08x," 3573 " size_low 0x%08x\n", hiword, 0, 0, 0, size); 3574 3575 bcopy(reg, newreg, rlen); 3576 bcopy(&addition, newreg + rlen, sizeof (pci_regspec_t)); 3577 3578 /* 3579 * Write out the new "reg" property 3580 */ 3581 (void) ndi_prop_update_int_array(DDI_DEV_T_NONE, 3582 dip, "reg", (int *)newreg, 3583 (rlen + sizeof (pci_regspec_t))/sizeof (int)); 3584 3585 kmem_free((caddr_t)reg, rlen); 3586 kmem_free((caddr_t)newreg, rlen+sizeof (pci_regspec_t)); 3587 3588 return (PCICFG_SUCCESS); 3589 } 3590 3591 /* 3592 * Setup the basic 1275 properties based on information found in the config 3593 * header of the PCI device 3594 */ 3595 static int 3596 cardbus_set_standard_props(dev_info_t *parent, dev_info_t *dip, 3597 ddi_acc_handle_t config_handle) 3598 { 3599 int ret; 3600 uint16_t val; 3601 uint32_t wordval; 3602 uint8_t byteval; 3603 3604 /* These two exists only for non-bridges */ 3605 if ((pci_config_get8(config_handle, 3606 PCI_CONF_HEADER) & PCI_HEADER_TYPE_M) == PCI_HEADER_ZERO) { 3607 byteval = pci_config_get8(config_handle, PCI_CONF_MIN_G); 3608 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3609 "min-grant", byteval)) != DDI_SUCCESS) { 3610 cardbus_err(dip, 1, "Failed to sent min-grant\n"); 3611 return (ret); 3612 } 3613 3614 byteval = pci_config_get8(config_handle, PCI_CONF_MAX_L); 3615 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3616 "max-latency", byteval)) != DDI_SUCCESS) { 3617 return (ret); 3618 } 3619 } 3620 3621 /* 3622 * These should always exist and have the value of the 3623 * corresponding register value 3624 */ 3625 val = pci_config_get16(config_handle, PCI_CONF_VENID); 3626 3627 /* 3628 * according to section 6.2.1 of revision 2 of the PCI local 3629 * bus specification - 0FFFFh is an invalid value for the vendor ID 3630 */ 3631 if (val == 0xffff) { 3632 cardbus_err(dip, 1, "Illegal vendor-id 0x%x\n", val); 3633 return (PCICFG_FAILURE); 3634 } 3635 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3636 "vendor-id", val)) != DDI_SUCCESS) { 3637 return (ret); 3638 } 3639 3640 val = pci_config_get16(config_handle, PCI_CONF_DEVID); 3641 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3642 "device-id", val)) != DDI_SUCCESS) { 3643 return (ret); 3644 } 3645 byteval = pci_config_get8(config_handle, PCI_CONF_REVID); 3646 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3647 "revision-id", byteval)) != DDI_SUCCESS) { 3648 return (ret); 3649 } 3650 3651 wordval = (pci_config_get16(config_handle, PCI_CONF_SUBCLASS)<< 8) | 3652 (pci_config_get8(config_handle, PCI_CONF_PROGCLASS)); 3653 3654 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3655 "class-code", wordval)) != DDI_SUCCESS) { 3656 return (ret); 3657 } 3658 val = (pci_config_get16(config_handle, 3659 PCI_CONF_STAT) & PCI_STAT_DEVSELT) >> 9; 3660 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3661 "devsel-speed", val)) != DDI_SUCCESS) { 3662 return (ret); 3663 } 3664 3665 /* 3666 * The next three are bits set in the status register. The property is 3667 * present (but with no value other than its own existence) if the bit 3668 * is set, non-existent otherwise 3669 */ 3670 if (ddi_prop_exists(DDI_DEV_T_ANY, parent, DDI_PROP_DONTPASS, 3671 "fast-back-to-back") && 3672 pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_FBBC) { 3673 3674 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3675 "fast-back-to-back", 0)) != DDI_SUCCESS) { 3676 return (ret); 3677 } 3678 } 3679 if (pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_66MHZ) { 3680 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3681 "66mhz-capable", 0)) != DDI_SUCCESS) { 3682 return (ret); 3683 } 3684 } 3685 if (pci_config_get16(config_handle, PCI_CONF_STAT) & PCI_STAT_UDF) { 3686 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3687 "udf-supported", 0)) != DDI_SUCCESS) { 3688 return (ret); 3689 } 3690 } 3691 3692 /* 3693 * These next three are optional and are not present 3694 * if the corresponding register is zero. If the value 3695 * is non-zero then the property exists with the value 3696 * of the register. 3697 */ 3698 3699 /* look in the correct place for header type 2 */ 3700 byteval = pci_config_get8(config_handle, PCI_CONF_HEADER); 3701 if ((byteval & PCI_HEADER_TYPE_M) == PCI_HEADER_TWO) { 3702 if ((val = pci_config_get16(config_handle, 3703 PCI_CBUS_SUBVENID)) != 0) { 3704 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3705 "subsystem-vendor-id", val)) != DDI_SUCCESS) { 3706 return (ret); 3707 } 3708 } 3709 if ((val = pci_config_get16(config_handle, 3710 PCI_CBUS_SUBSYSID)) != 0) { 3711 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3712 "subsystem-id", val)) != DDI_SUCCESS) { 3713 return (ret); 3714 } 3715 } 3716 } else { 3717 if ((val = pci_config_get16(config_handle, 3718 PCI_CONF_SUBVENID)) != 0) { 3719 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3720 "subsystem-vendor-id", val)) != DDI_SUCCESS) { 3721 return (ret); 3722 } 3723 } 3724 if ((val = pci_config_get16(config_handle, 3725 PCI_CONF_SUBSYSID)) != 0) { 3726 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3727 "subsystem-id", val)) != DDI_SUCCESS) { 3728 return (ret); 3729 } 3730 } 3731 } 3732 3733 if ((val = pci_config_get8(config_handle, 3734 PCI_CONF_CACHE_LINESZ)) != 0) { 3735 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3736 "cache-line-size", val)) != DDI_SUCCESS) { 3737 return (ret); 3738 } 3739 } 3740 3741 /* 3742 * If the Interrupt Pin register is non-zero then the 3743 * interrupts property exists 3744 */ 3745 if ((byteval = pci_config_get8(config_handle, PCI_CONF_IPIN)) != 0) { 3746 /* 3747 * If interrupt pin is non-zero, 3748 * record the interrupt line used 3749 */ 3750 cardbus_err(dip, 8, "Adding interrupts property\n"); 3751 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3752 "interrupts", byteval)) != DDI_SUCCESS) { 3753 return (ret); 3754 } 3755 } 3756 return (PCICFG_SUCCESS); 3757 } 3758 3759 /* 3760 * Setup the basic properties required by the ISA node. 3761 */ 3762 static int 3763 cardbus_set_isa_props(dev_info_t *parent, dev_info_t *dip, 3764 char *name, char *compat[]) 3765 { 3766 int ret, n; 3767 3768 _NOTE(ARGUNUSED(parent)) 3769 3770 cardbus_err(dip, 8, "Adding interrupts property\n"); 3771 if ((ret = ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3772 "interrupts", 1)) != DDI_SUCCESS) { 3773 return (ret); 3774 } 3775 3776 /* 3777 * The node name field needs to be filled in with the name 3778 */ 3779 if (ndi_devi_set_nodename(dip, name, 0) != NDI_SUCCESS) { 3780 cardbus_err(dip, 1, "Failed to set nodename for node\n"); 3781 return (PCICFG_FAILURE); 3782 } 3783 3784 /* 3785 * Create the compatible property as an array of pointers 3786 * to strings. Start with the buffer created above. 3787 */ 3788 n = 0; 3789 while (compat[n] != NULL) 3790 n++; 3791 3792 if (n != 0) 3793 if ((ret = ndi_prop_update_string_array(DDI_DEV_T_NONE, dip, 3794 "compatible", compat, n)) != DDI_SUCCESS) 3795 return (ret); 3796 3797 return (PCICFG_SUCCESS); 3798 } 3799 3800 static int 3801 cardbus_set_busnode_props(dev_info_t *dip) 3802 { 3803 cardbus_err(dip, 6, "cardbus_set_busnode_props\n"); 3804 3805 cardbus_force_stringprop(dip, "device_type", "pci"); 3806 3807 if (ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3808 "#address-cells", 3) != DDI_SUCCESS) { 3809 cardbus_err(dip, 4, "Failed to set #address-cells\n"); 3810 } 3811 if (ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3812 "#size-cells", 2) != DDI_SUCCESS) { 3813 cardbus_err(dip, 4, "Failed to set #size-cells\n"); 3814 } 3815 return (PCICFG_SUCCESS); 3816 } 3817 3818 static int 3819 cardbus_set_busnode_isaprops(dev_info_t *dip) 3820 { 3821 cardbus_err(dip, 6, "cardbus_set_busnode_props\n"); 3822 3823 cardbus_force_stringprop(dip, "device_type", "isa"); 3824 3825 if (ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3826 "#address-cells", 2) != DDI_SUCCESS) { 3827 cardbus_err(dip, 4, "Failed to set #address-cells\n"); 3828 } 3829 if (ndi_prop_update_int(DDI_DEV_T_NONE, dip, 3830 "#size-cells", 1) != DDI_SUCCESS) { 3831 cardbus_err(dip, 4, "Failed to set #size-cells\n"); 3832 } 3833 return (PCICFG_SUCCESS); 3834 } 3835 3836 /* 3837 * Use cb%x,%x rather than pci%x,%x so that we can use specific cardbus 3838 * drivers in /etc/driver_aliases if required 3839 */ 3840 static int 3841 cardbus_set_childnode_props(dev_info_t *dip, ddi_acc_handle_t config_handle) 3842 { 3843 int ret; 3844 #ifndef _DONT_USE_1275_GENERIC_NAMES 3845 uint32_t wordval; 3846 #endif 3847 char *name; 3848 char buffer[64]; 3849 uint32_t classcode; 3850 char *compat[8]; 3851 int i, n; 3852 uint16_t subsysid, subvenid, devid, venid; 3853 uint8_t header_type; 3854 3855 /* 3856 * NOTE: These are for both a child and PCI-PCI bridge node 3857 */ 3858 #ifndef _DONT_USE_1275_GENERIC_NAMES 3859 wordval = (pci_config_get16(config_handle, PCI_CONF_SUBCLASS)<< 8) | 3860 (pci_config_get8(config_handle, PCI_CONF_PROGCLASS)); 3861 #endif 3862 3863 /* Cardbus support */ 3864 venid = pci_config_get16(config_handle, PCI_CONF_VENID); 3865 devid = pci_config_get16(config_handle, PCI_CONF_DEVID); 3866 3867 header_type = pci_config_get8(config_handle, PCI_CONF_HEADER); 3868 if ((header_type & PCI_HEADER_TYPE_M) == PCI_HEADER_TWO) { 3869 subvenid = pci_config_get16(config_handle, PCI_CBUS_SUBVENID); 3870 subsysid = pci_config_get16(config_handle, PCI_CBUS_SUBSYSID); 3871 } else { 3872 subvenid = pci_config_get16(config_handle, PCI_CONF_SUBVENID); 3873 subsysid = pci_config_get16(config_handle, PCI_CONF_SUBSYSID); 3874 } 3875 3876 if (subsysid != 0) { 3877 (void) sprintf(buffer, "pci%x,%x", subvenid, subsysid); 3878 } else { 3879 (void) sprintf(buffer, "pci%x,%x", venid, devid); 3880 } 3881 3882 cardbus_err(dip, 8, "Childname is %s\n", buffer); 3883 3884 /* 3885 * In some environments, trying to use "generic" 1275 names is 3886 * not the convention. In those cases use the name as created 3887 * above. In all the rest of the cases, check to see if there 3888 * is a generic name first. 3889 */ 3890 #ifdef _DONT_USE_1275_GENERIC_NAMES 3891 name = buffer; 3892 #else 3893 if ((name = cardbus_get_class_name(wordval>>8)) == NULL) { 3894 /* 3895 * Set name to the above fabricated name 3896 */ 3897 name = buffer; 3898 } 3899 3900 cardbus_err(dip, 8, "Set nodename to %s\n", name); 3901 #endif 3902 3903 /* 3904 * The node name field needs to be filled in with the name 3905 */ 3906 if (ndi_devi_set_nodename(dip, name, 0) != NDI_SUCCESS) { 3907 cardbus_err(dip, 1, "Failed to set nodename for node\n"); 3908 return (PCICFG_FAILURE); 3909 } 3910 3911 /* 3912 * Create the compatible property as an array of pointers 3913 * to strings. Start with the cb name. 3914 */ 3915 n = 0; 3916 3917 if (subsysid != 0) { 3918 (void) sprintf(buffer, "cb%x,%x", subvenid, subsysid); 3919 } else { 3920 (void) sprintf(buffer, "cb%x,%x", venid, devid); 3921 } 3922 3923 compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP); 3924 (void) strcpy(compat[n++], buffer); 3925 3926 if (subsysid != 0) { 3927 /* 3928 * Add subsys numbers as pci compatible. 3929 */ 3930 (void) sprintf(buffer, "pci%x,%x", subvenid, subsysid); 3931 compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP); 3932 (void) strcpy(compat[n++], buffer); 3933 } 3934 3935 /* 3936 * Add in the VendorID/DeviceID compatible name. 3937 */ 3938 (void) sprintf(buffer, "pci%x,%x", venid, devid); 3939 3940 compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP); 3941 (void) strcpy(compat[n++], buffer); 3942 3943 classcode = (pci_config_get16(config_handle, PCI_CONF_SUBCLASS)<< 8) | 3944 (pci_config_get8(config_handle, PCI_CONF_PROGCLASS)); 3945 3946 /* 3947 * Add in the Classcode 3948 */ 3949 (void) sprintf(buffer, "pciclass,%06x", classcode); 3950 3951 cardbus_err(dip, 8, "class code %s\n", buffer); 3952 3953 compat[n] = kmem_alloc(strlen(buffer) + 1, KM_SLEEP); 3954 (void) strcpy(compat[n++], buffer); 3955 3956 if ((ret = ndi_prop_update_string_array(DDI_DEV_T_NONE, dip, 3957 "compatible", (char **)compat, n)) != DDI_SUCCESS) { 3958 return (ret); 3959 } 3960 3961 for (i = 0; i < n; i++) { 3962 kmem_free(compat[i], strlen(compat[i]) + 1); 3963 } 3964 3965 return (PCICFG_SUCCESS); 3966 } 3967 3968 /* 3969 * Program the bus numbers into the bridge 3970 */ 3971 static void 3972 cardbus_set_bus_numbers(ddi_acc_handle_t config_handle, 3973 uint_t primary, uint_t secondary) 3974 { 3975 cardbus_err(NULL, 8, 3976 "cardbus_set_bus_numbers [%d->%d]\n", primary, secondary); 3977 3978 /* 3979 * Primary bus# 3980 */ 3981 pci_config_put8(config_handle, PCI_BCNF_PRIBUS, primary); 3982 3983 /* 3984 * Secondary bus# 3985 */ 3986 pci_config_put8(config_handle, PCI_BCNF_SECBUS, secondary); 3987 3988 /* 3989 * Set the subordinate bus number to ff in order to pass through any 3990 * type 1 cycle with a bus number higher than the secondary bus# 3991 * Note that this is reduced once the probe is complete in the 3992 * cardbus_setup_bridge() function. 3993 */ 3994 pci_config_put8(config_handle, PCI_BCNF_SUBBUS, 0xFF); 3995 } 3996 3997 static void 3998 enable_pci_isa_bridge(dev_info_t *dip, ddi_acc_handle_t config_handle) 3999 { 4000 uint16_t comm, stat; 4001 4002 stat = pci_config_get16(config_handle, PCI_CONF_STAT); 4003 comm = pci_config_get16(config_handle, PCI_CONF_COMM); 4004 4005 /* 4006 * Enable memory, IO, bus mastership and error detection. 4007 */ 4008 comm |= (PCI_COMM_ME | PCI_COMM_MAE | PCI_COMM_IO | 4009 PCI_COMM_PARITY_DETECT | PCI_COMM_SERR_ENABLE); 4010 if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 4011 "fast-back-to-back")) 4012 comm |= PCI_COMM_BACK2BACK_ENAB; 4013 pci_config_put16(config_handle, PCI_CONF_COMM, comm); 4014 cardbus_err(NULL, 8, 4015 "enable_pci_isa_bridge stat 0x%04x comm 0x%04x\n", stat, comm); 4016 4017 /* 4018 * ITE8888 Specific registers. 4019 */ 4020 pci_config_put8(config_handle, 0x50, 0x00); /* Timing Control */ 4021 pci_config_put8(config_handle, 0x52, 0x00); /* Master DMA Access */ 4022 pci_config_put8(config_handle, 0x53, 0x01); /* ROMCS */ 4023 } 4024 4025 static void 4026 enable_pci_pci_bridge(dev_info_t *dip, ddi_acc_handle_t config_handle) 4027 { 4028 uint16_t comm, stat, bctrl; 4029 4030 stat = pci_config_get16(config_handle, PCI_CONF_STAT); 4031 comm = pci_config_get16(config_handle, PCI_CONF_COMM); 4032 bctrl = pci_config_get16(config_handle, PCI_CBUS_BRIDGE_CTRL); 4033 4034 comm &= ~(PCI_COMM_IO | PCI_COMM_MAE); 4035 comm |= (PCI_COMM_ME | PCI_COMM_PARITY_DETECT | PCI_COMM_SERR_ENABLE); 4036 4037 /* 4038 * Enable back to back. 4039 */ 4040 if (stat & PCI_STAT_FBBC) 4041 comm |= PCI_COMM_BACK2BACK_ENAB; 4042 4043 pci_config_put16(config_handle, PCI_CONF_COMM, comm); 4044 4045 /* 4046 * Reset the sub-ordinate bus. 4047 */ 4048 if (!(bctrl & PCI_BCNF_BCNTRL_RESET)) 4049 pci_config_put16(config_handle, PCI_CBUS_BRIDGE_CTRL, 4050 bctrl | PCI_BCNF_BCNTRL_RESET); 4051 else 4052 bctrl &= ~PCI_BCNF_BCNTRL_RESET; 4053 4054 /* 4055 * Enable error reporting. 4056 */ 4057 bctrl |= (PCI_BCNF_BCNTRL_PARITY_ENABLE | PCI_BCNF_BCNTRL_SERR_ENABLE | 4058 PCI_BCNF_BCNTRL_MAST_AB_MODE); 4059 4060 /* 4061 * Enable back to back on secondary bus. 4062 */ 4063 if (stat & PCI_STAT_FBBC) 4064 bctrl |= PCI_BCNF_BCNTRL_B2B_ENAB; 4065 4066 pci_config_put16(config_handle, PCI_CBUS_BRIDGE_CTRL, bctrl); 4067 cardbus_err(dip, 8, 4068 "enable_pci_pci_bridge stat 0x%04x comm 0x%04x bctrl 0x%04x\n", 4069 stat, comm, bctrl); 4070 } 4071 4072 static int cardbus_reset_wait = 20; 4073 4074 static void 4075 enable_cardbus_bridge(dev_info_t *dip, ddi_acc_handle_t config_handle) 4076 { 4077 uint16_t comm, stat, bctrl; 4078 4079 stat = pci_config_get16(config_handle, PCI_CONF_STAT); 4080 comm = pci_config_get16(config_handle, PCI_CONF_COMM); 4081 bctrl = pci_config_get16(config_handle, PCI_CBUS_BRIDGE_CTRL); 4082 4083 /* 4084 * Don't mess with the command register on the cardbus bridge 4085 * itself. This should have been done when it's parent 4086 * did the setup. Some devices *require* certain things to 4087 * disabled, this can be done using the "command-preserve" 4088 * property and if we mess with it here it breaks that. 4089 * 4090 * comm |= (PCI_COMM_ME | PCI_COMM_PARITY_DETECT | 4091 * PCI_COMM_SERR_ENABLE); 4092 */ 4093 4094 /* 4095 * Reset the sub-ordinate bus. 4096 */ 4097 if (!(bctrl & PCI_BCNF_BCNTRL_RESET)) 4098 pci_config_put16(config_handle, PCI_CBUS_BRIDGE_CTRL, 4099 bctrl | PCI_BCNF_BCNTRL_RESET); 4100 else 4101 bctrl &= ~PCI_BCNF_BCNTRL_RESET; 4102 4103 /* 4104 * Turn off pre-fetch. 4105 */ 4106 bctrl &= ~(CB_BCNF_BCNTRL_MEM0_PREF | CB_BCNF_BCNTRL_MEM1_PREF | 4107 PCI_BCNF_BCNTRL_PARITY_ENABLE | PCI_BCNF_BCNTRL_SERR_ENABLE); 4108 4109 /* 4110 * Enable error reporting. 4111 */ 4112 bctrl |= (PCI_BCNF_BCNTRL_MAST_AB_MODE | CB_BCNF_BCNTRL_WRITE_POST); 4113 if (comm & PCI_COMM_PARITY_DETECT) 4114 bctrl |= PCI_BCNF_BCNTRL_PARITY_ENABLE; 4115 if (comm & PCI_COMM_SERR_ENABLE) 4116 bctrl |= PCI_BCNF_BCNTRL_SERR_ENABLE; 4117 4118 pci_config_put16(config_handle, PCI_CBUS_BRIDGE_CTRL, bctrl); 4119 pci_config_put8(config_handle, PCI_CBUS_LATENCY_TIMER, 4120 cardbus_latency_timer); 4121 4122 pci_config_put16(config_handle, PCI_CONF_STAT, stat); 4123 pci_config_put16(config_handle, PCI_CONF_COMM, comm); 4124 4125 cardbus_err(dip, 8, 4126 "enable_cardbus_bridge() stat 0x%04x comm 0x%04x bctrl 0x%04x\n", 4127 stat, comm, bctrl); 4128 4129 /* after resetting the bridge, wait for everything to stablize */ 4130 delay(drv_usectohz(cardbus_reset_wait * 1000)); 4131 4132 } 4133 4134 static void 4135 disable_pci_pci_bridge(dev_info_t *dip, ddi_acc_handle_t config_handle) 4136 { 4137 uint16_t comm, bctrl; 4138 4139 comm = pci_config_get16(config_handle, PCI_CONF_COMM); 4140 bctrl = pci_config_get16(config_handle, PCI_CBUS_BRIDGE_CTRL); 4141 4142 /* 4143 * Turn off subordinate bus access. 4144 */ 4145 pci_config_put8(config_handle, PCI_BCNF_SECBUS, 0); 4146 pci_config_put8(config_handle, PCI_BCNF_SUBBUS, 0); 4147 4148 /* 4149 * Disable error reporting. 4150 */ 4151 bctrl &= ~(PCI_BCNF_BCNTRL_PARITY_ENABLE | PCI_BCNF_BCNTRL_SERR_ENABLE | 4152 PCI_BCNF_BCNTRL_MAST_AB_MODE); 4153 comm = 0; 4154 4155 pci_config_put16(config_handle, PCI_CONF_COMM, comm); 4156 pci_config_put16(config_handle, PCI_CBUS_BRIDGE_CTRL, bctrl); 4157 4158 cardbus_err(dip, 6, 4159 "disable_pci_pci_bridge() stat 0x%04x comm 0x%04x bctrl 0x%04x\n", 4160 pci_config_get16(config_handle, PCI_CONF_STAT), comm, bctrl); 4161 } 4162 4163 static void 4164 disable_cardbus_bridge(dev_info_t *dip, ddi_acc_handle_t config_handle) 4165 { 4166 uint16_t comm, bctrl; 4167 4168 comm = pci_config_get16(config_handle, PCI_CONF_COMM); 4169 bctrl = pci_config_get16(config_handle, PCI_CBUS_BRIDGE_CTRL); 4170 4171 /* 4172 * Turn off subordinate bus access. 4173 */ 4174 pci_config_put8(config_handle, PCI_BCNF_SECBUS, 0); 4175 pci_config_put8(config_handle, PCI_BCNF_SUBBUS, 0); 4176 4177 /* 4178 * Disable error reporting. 4179 */ 4180 bctrl &= ~(PCI_BCNF_BCNTRL_PARITY_ENABLE | PCI_BCNF_BCNTRL_SERR_ENABLE | 4181 PCI_BCNF_BCNTRL_MAST_AB_MODE); 4182 4183 pci_config_put32(config_handle, PCI_CBUS_MEM_LIMIT0, 0); 4184 pci_config_put32(config_handle, PCI_CBUS_MEM_BASE0, 0); 4185 pci_config_put32(config_handle, PCI_CBUS_IO_LIMIT0, 0); 4186 pci_config_put32(config_handle, PCI_CBUS_IO_BASE0, 0); 4187 pci_config_put16(config_handle, PCI_CONF_COMM, comm); 4188 pci_config_put16(config_handle, PCI_CBUS_BRIDGE_CTRL, bctrl); 4189 4190 cardbus_err(dip, 6, 4191 "disable_cardbus_bridge() stat 0x%04x comm 0x%04x bctrl 0x%04x\n", 4192 pci_config_get16(config_handle, PCI_CONF_STAT), comm, bctrl); 4193 } 4194 4195 static void 4196 enable_cardbus_device(dev_info_t *dip, ddi_acc_handle_t config_handle) 4197 { 4198 uint16_t comm, stat; 4199 4200 stat = pci_config_get16(config_handle, PCI_CONF_STAT); 4201 comm = pci_config_get16(config_handle, PCI_CONF_COMM); 4202 4203 /* 4204 * Enable memory, IO, bus mastership and error detection. 4205 */ 4206 comm |= (PCI_COMM_ME | PCI_COMM_MAE | PCI_COMM_IO | 4207 PCI_COMM_PARITY_DETECT | PCI_COMM_SERR_ENABLE); 4208 if (ddi_prop_exists(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 4209 "fast-back-to-back")) 4210 comm |= PCI_COMM_BACK2BACK_ENAB; 4211 pci_config_put16(config_handle, PCI_CONF_COMM, comm); 4212 cardbus_err(NULL, 8, 4213 "enable_cardbus_device stat 0x%04x comm 0x%04x\n", stat, comm); 4214 } 4215 4216 static void 4217 disable_cardbus_device(ddi_acc_handle_t config_handle) 4218 { 4219 cardbus_err(NULL, 8, "disable_cardbus_device\n"); 4220 4221 /* 4222 * Turn off everything in the command register. 4223 */ 4224 pci_config_put16(config_handle, PCI_CONF_COMM, 0x0); 4225 } 4226 4227 #ifndef _DONT_USE_1275_GENERIC_NAMES 4228 static char * 4229 cardbus_get_class_name(uint32_t classcode) 4230 { 4231 struct cardbus_name_entry *ptr; 4232 4233 for (ptr = &cardbus_class_lookup[0]; ptr->name != NULL; ptr++) { 4234 if (ptr->class_code == classcode) { 4235 return (ptr->name); 4236 } 4237 } 4238 return (NULL); 4239 } 4240 #endif /* _DONT_USE_1275_GENERIC_NAMES */ 4241 4242 static void 4243 cardbus_force_boolprop(dev_info_t *dip, char *pname) 4244 { 4245 int ret; 4246 4247 if ((ret = ndi_prop_create_boolean(DDI_DEV_T_NONE, dip, 4248 pname)) != DDI_SUCCESS) { 4249 if (ret == DDI_PROP_NOT_FOUND) 4250 if (ddi_prop_create(DDI_DEV_T_NONE, dip, 4251 DDI_PROP_CANSLEEP, pname, 4252 (caddr_t)NULL, 0) != DDI_SUCCESS) 4253 cardbus_err(dip, 4, 4254 "Failed to set boolean property " 4255 "\"%s\"\n", pname); 4256 } 4257 } 4258 4259 static void 4260 cardbus_force_intprop(dev_info_t *dip, char *pname, int *pval, int len) 4261 { 4262 int ret; 4263 4264 if ((ret = ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, 4265 pname, pval, len)) != DDI_SUCCESS) { 4266 if (ret == DDI_PROP_NOT_FOUND) 4267 if (ddi_prop_create(DDI_DEV_T_NONE, dip, 4268 DDI_PROP_CANSLEEP, pname, 4269 (caddr_t)pval, len*sizeof (int)) 4270 != DDI_SUCCESS) 4271 cardbus_err(dip, 4, 4272 "Failed to set int property \"%s\"\n", 4273 pname); 4274 } 4275 } 4276 4277 static void 4278 cardbus_force_stringprop(dev_info_t *dip, char *pname, char *pval) 4279 { 4280 int ret; 4281 4282 if ((ret = ndi_prop_update_string(DDI_DEV_T_NONE, dip, 4283 pname, pval)) != DDI_SUCCESS) { 4284 if (ret == DDI_PROP_NOT_FOUND) 4285 if (ddi_prop_create(DDI_DEV_T_NONE, dip, 4286 DDI_PROP_CANSLEEP, pname, 4287 pval, strlen(pval) + 1) != DDI_SUCCESS) 4288 cardbus_err(dip, 4, 4289 "Failed to set string property " 4290 "\"%s\" to \"%s\"\n", 4291 pname, pval); 4292 } 4293 } 4294 4295 static void 4296 split_addr(char *naddr, int *dev, int *func) 4297 { 4298 char c; 4299 int *ip = dev; 4300 4301 *dev = 0; 4302 *func = 0; 4303 4304 while (c = *naddr++) { 4305 if (c == ',') { 4306 ip = func; 4307 continue; 4308 } 4309 if (c >= '0' && c <= '9') { 4310 *ip = (*ip * 16) + (c - '0'); 4311 } else if (c >= 'a' && c <= 'f') { 4312 *ip = (*ip * 16) + 10 + (c - 'a'); 4313 } else 4314 break; 4315 } 4316 } 4317 4318 #ifdef DEBUG 4319 static void 4320 cardbus_dump_common_config(ddi_acc_handle_t config_handle) 4321 { 4322 cardbus_err(NULL, 1, 4323 " Vendor ID = [0x%04x] " 4324 "Device ID = [0x%04x]\n", 4325 pci_config_get16(config_handle, PCI_CONF_VENID), 4326 pci_config_get16(config_handle, PCI_CONF_DEVID)); 4327 cardbus_err(NULL, 1, 4328 " Command REG = [0x%04x] " 4329 "Status REG = [0x%04x]\n", 4330 pci_config_get16(config_handle, PCI_CONF_COMM), 4331 pci_config_get16(config_handle, PCI_CONF_STAT)); 4332 cardbus_err(NULL, 1, 4333 " Revision ID = [0x%02x] " 4334 "Prog Class = [0x%02x]\n", 4335 pci_config_get8(config_handle, PCI_CONF_REVID), 4336 pci_config_get8(config_handle, PCI_CONF_PROGCLASS)); 4337 cardbus_err(NULL, 1, 4338 " Dev Class = [0x%02x] " 4339 "Base Class = [0x%02x]\n", 4340 pci_config_get8(config_handle, PCI_CONF_SUBCLASS), 4341 pci_config_get8(config_handle, PCI_CONF_BASCLASS)); 4342 cardbus_err(NULL, 1, 4343 " Cache LnSz = [0x%02x] " 4344 "Latency Tmr = [0x%02x]\n", 4345 pci_config_get8(config_handle, PCI_CONF_CACHE_LINESZ), 4346 pci_config_get8(config_handle, PCI_CONF_LATENCY_TIMER)); 4347 cardbus_err(NULL, 1, 4348 " Header Type = [0x%02x] " 4349 "BIST = [0x%02x]\n", 4350 pci_config_get8(config_handle, PCI_CONF_HEADER), 4351 pci_config_get8(config_handle, PCI_CONF_BIST)); 4352 } 4353 4354 static void 4355 cardbus_dump_device_config(ddi_acc_handle_t config_handle) 4356 { 4357 cardbus_dump_common_config(config_handle); 4358 4359 cardbus_err(NULL, 1, 4360 " BASE 0 = [0x%08x] BASE 1 = [0x%08x]\n", 4361 pci_config_get32(config_handle, PCI_CONF_BASE0), 4362 pci_config_get32(config_handle, PCI_CONF_BASE1)); 4363 cardbus_err(NULL, 1, 4364 " BASE 2 = [0x%08x] BASE 3 = [0x%08x]\n", 4365 pci_config_get32(config_handle, PCI_CONF_BASE2), 4366 pci_config_get32(config_handle, PCI_CONF_BASE3)); 4367 cardbus_err(NULL, 1, 4368 " BASE 4 = [0x%08x] BASE 5 = [0x%08x]\n", 4369 pci_config_get32(config_handle, PCI_CONF_BASE4), 4370 pci_config_get32(config_handle, PCI_CONF_BASE5)); 4371 cardbus_err(NULL, 1, 4372 " Cardbus CIS = [0x%08x] ROM = [0x%08x]\n", 4373 pci_config_get32(config_handle, PCI_CONF_CIS), 4374 pci_config_get32(config_handle, PCI_CONF_ROM)); 4375 cardbus_err(NULL, 1, 4376 " Sub VID = [0x%04x] Sub SID = [0x%04x]\n", 4377 pci_config_get16(config_handle, PCI_CONF_SUBVENID), 4378 pci_config_get16(config_handle, PCI_CONF_SUBSYSID)); 4379 cardbus_err(NULL, 1, 4380 " I Line = [0x%02x] I Pin = [0x%02x]\n", 4381 pci_config_get8(config_handle, PCI_CONF_ILINE), 4382 pci_config_get8(config_handle, PCI_CONF_IPIN)); 4383 cardbus_err(NULL, 1, 4384 " Max Grant = [0x%02x] Max Latent = [0x%02x]\n", 4385 pci_config_get8(config_handle, PCI_CONF_MIN_G), 4386 pci_config_get8(config_handle, PCI_CONF_MAX_L)); 4387 } 4388 4389 static void 4390 cardbus_dump_bridge_config(ddi_acc_handle_t config_handle, 4391 uint8_t header_type) 4392 { 4393 if (header_type == PCI_HEADER_PPB) { 4394 cardbus_dump_common_config(config_handle); 4395 cardbus_err(NULL, 1, 4396 "........................................\n"); 4397 } else { 4398 cardbus_dump_common_config(config_handle); 4399 cardbus_err(NULL, 1, 4400 " Mem Base = [0x%08x] CBus Status = [0x%04x]\n", 4401 pci_config_get32(config_handle, PCI_CBUS_SOCK_REG), 4402 pci_config_get16(config_handle, PCI_CBUS_SEC_STATUS)); 4403 } 4404 4405 cardbus_err(NULL, 1, 4406 " Pri Bus = [0x%02x] Sec Bus = [0x%02x]\n", 4407 pci_config_get8(config_handle, PCI_BCNF_PRIBUS), 4408 pci_config_get8(config_handle, PCI_BCNF_SECBUS)); 4409 cardbus_err(NULL, 1, 4410 " Sub Bus = [0x%02x] Sec Latency = [0x%02x]\n", 4411 pci_config_get8(config_handle, PCI_BCNF_SUBBUS), 4412 pci_config_get8(config_handle, PCI_BCNF_LATENCY_TIMER)); 4413 4414 switch (header_type) { 4415 case PCI_HEADER_PPB: 4416 cardbus_err(NULL, 1, 4417 " I/O Base LO = [0x%02x] I/O Lim LO = [0x%02x]\n", 4418 pci_config_get8(config_handle, PCI_BCNF_IO_BASE_LOW), 4419 pci_config_get8(config_handle, PCI_BCNF_IO_LIMIT_LOW)); 4420 cardbus_err(NULL, 1, 4421 " Sec. Status = [0x%04x]\n", 4422 pci_config_get16(config_handle, PCI_BCNF_SEC_STATUS)); 4423 cardbus_err(NULL, 1, 4424 " Mem Base = [0x%04x] Mem Limit = [0x%04x]\n", 4425 pci_config_get16(config_handle, PCI_BCNF_MEM_BASE), 4426 pci_config_get16(config_handle, PCI_BCNF_MEM_LIMIT)); 4427 cardbus_err(NULL, 1, 4428 " PF Mem Base = [0x%04x] PF Mem Lim = [0x%04x]\n", 4429 pci_config_get16(config_handle, PCI_BCNF_PF_BASE_LOW), 4430 pci_config_get16(config_handle, PCI_BCNF_PF_LIMIT_LOW)); 4431 cardbus_err(NULL, 1, 4432 " PF Base HI = [0x%08x] PF Lim HI = [0x%08x]\n", 4433 pci_config_get32(config_handle, PCI_BCNF_PF_BASE_HIGH), 4434 pci_config_get32(config_handle, PCI_BCNF_PF_LIMIT_HIGH)); 4435 cardbus_err(NULL, 1, 4436 " I/O Base HI = [0x%04x] I/O Lim HI = [0x%04x]\n", 4437 pci_config_get16(config_handle, PCI_BCNF_IO_BASE_HI), 4438 pci_config_get16(config_handle, PCI_BCNF_IO_LIMIT_HI)); 4439 cardbus_err(NULL, 1, 4440 " ROM addr = [0x%08x]\n", 4441 pci_config_get32(config_handle, PCI_BCNF_ROM)); 4442 break; 4443 case PCI_HEADER_CARDBUS: 4444 cardbus_err(NULL, 1, 4445 " Mem Base 0 = [0x%08x] Mem Limit 0 = [0x%08x]\n", 4446 pci_config_get32(config_handle, PCI_CBUS_MEM_BASE0), 4447 pci_config_get32(config_handle, PCI_CBUS_MEM_LIMIT0)); 4448 cardbus_err(NULL, 1, 4449 " Mem Base 1 = [0x%08x] Mem Limit 1 = [0x%08x]\n", 4450 pci_config_get32(config_handle, PCI_CBUS_MEM_BASE1), 4451 pci_config_get32(config_handle, PCI_CBUS_MEM_LIMIT1)); 4452 cardbus_err(NULL, 1, 4453 " IO Base 0 = [0x%08x] IO Limit 0 = [0x%08x]\n", 4454 pci_config_get32(config_handle, PCI_CBUS_IO_BASE0), 4455 pci_config_get32(config_handle, PCI_CBUS_IO_LIMIT0)); 4456 cardbus_err(NULL, 1, 4457 " IO Base 1 = [0x%08x] IO Limit 1 = [0x%08x]\n", 4458 pci_config_get32(config_handle, PCI_CBUS_IO_BASE1), 4459 pci_config_get32(config_handle, PCI_CBUS_IO_LIMIT1)); 4460 break; 4461 } 4462 cardbus_err(NULL, 1, 4463 " Intr Line = [0x%02x] Intr Pin = [0x%02x]\n", 4464 pci_config_get8(config_handle, PCI_BCNF_ILINE), 4465 pci_config_get8(config_handle, PCI_BCNF_IPIN)); 4466 cardbus_err(NULL, 1, 4467 " Bridge Ctrl = [0x%04x]\n", 4468 pci_config_get16(config_handle, PCI_BCNF_BCNTRL)); 4469 4470 switch (header_type) { 4471 case PCI_HEADER_CARDBUS: 4472 cardbus_err(NULL, 1, 4473 " Sub VID = [0x%04x] Sub SID = [0x%04x]\n", 4474 pci_config_get16(config_handle, PCI_CBUS_SUBVENID), 4475 pci_config_get16(config_handle, PCI_CBUS_SUBSYSID)); 4476 /* LATER: TI1250 only */ 4477 cardbus_err(NULL, 1, 4478 " Sys Control = [0x%08x]\n", 4479 pci_config_get32(config_handle, 0x80)); 4480 } 4481 } 4482 4483 static void 4484 cardbus_dump_config(ddi_acc_handle_t config_handle) 4485 { 4486 uint8_t header_type = pci_config_get8(config_handle, 4487 PCI_CONF_HEADER) & PCI_HEADER_TYPE_M; 4488 4489 if (header_type == PCI_HEADER_PPB || header_type == PCI_HEADER_CARDBUS) 4490 cardbus_dump_bridge_config(config_handle, header_type); 4491 else 4492 cardbus_dump_device_config(config_handle); 4493 } 4494 4495 static void 4496 cardbus_dump_reg(dev_info_t *dip, const pci_regspec_t *regspec, int nelems) 4497 { 4498 /* int rlen = nelems * sizeof(pci_regspec_t); */ 4499 4500 cardbus_err(dip, 6, 4501 "cardbus_dump_reg: \"reg\" has %d elements\n", nelems); 4502 4503 #if defined(CARDBUS_DEBUG) 4504 if (cardbus_debug >= 1) { 4505 int i; 4506 uint32_t *regs = (uint32_t *)regspec; 4507 4508 for (i = 0; i < nelems; i++) { 4509 4510 cardbus_err(NULL, 6, 4511 "\t%d:%08x %08x %08x %08x %08x\n", 4512 i, regs[0], regs[1], regs[2], regs[3], regs[4]); 4513 } 4514 } 4515 #endif 4516 } 4517 4518 #endif 4519 4520 #if defined(CARDBUS_DEBUG) 4521 void 4522 cardbus_dump_children(dev_info_t *dip, int level) 4523 { 4524 dev_info_t *next; 4525 4526 cardbus_err(dip, 1, 4527 "\t%d: %s: 0x%p\n", level, ddi_node_name(dip), (void *) dip); 4528 for (next = ddi_get_child(dip); next; 4529 next = ddi_get_next_sibling(next)) 4530 cardbus_dump_children(next, level + 1); 4531 } 4532 4533 void 4534 cardbus_dump_family_tree(dev_info_t *dip) 4535 { 4536 cardbus_err(dip, 1, "0x%p family tree:\n", (void *) dip); 4537 cardbus_dump_children(dip, 1); 4538 } 4539 #endif 4540