xref: /titanic_51/usr/src/uts/common/fs/zfs/zil.c (revision eb1d81f3a9f8d0c56b7fca4667287a099fa49cfa)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/zfs_context.h>
27 #include <sys/spa.h>
28 #include <sys/spa_impl.h>
29 #include <sys/dmu.h>
30 #include <sys/zap.h>
31 #include <sys/arc.h>
32 #include <sys/stat.h>
33 #include <sys/resource.h>
34 #include <sys/zil.h>
35 #include <sys/zil_impl.h>
36 #include <sys/dsl_dataset.h>
37 #include <sys/vdev.h>
38 #include <sys/dmu_tx.h>
39 
40 /*
41  * The zfs intent log (ZIL) saves transaction records of system calls
42  * that change the file system in memory with enough information
43  * to be able to replay them. These are stored in memory until
44  * either the DMU transaction group (txg) commits them to the stable pool
45  * and they can be discarded, or they are flushed to the stable log
46  * (also in the pool) due to a fsync, O_DSYNC or other synchronous
47  * requirement. In the event of a panic or power fail then those log
48  * records (transactions) are replayed.
49  *
50  * There is one ZIL per file system. Its on-disk (pool) format consists
51  * of 3 parts:
52  *
53  * 	- ZIL header
54  * 	- ZIL blocks
55  * 	- ZIL records
56  *
57  * A log record holds a system call transaction. Log blocks can
58  * hold many log records and the blocks are chained together.
59  * Each ZIL block contains a block pointer (blkptr_t) to the next
60  * ZIL block in the chain. The ZIL header points to the first
61  * block in the chain. Note there is not a fixed place in the pool
62  * to hold blocks. They are dynamically allocated and freed as
63  * needed from the blocks available. Figure X shows the ZIL structure:
64  */
65 
66 /*
67  * This global ZIL switch affects all pools
68  */
69 int zil_disable = 0;	/* disable intent logging */
70 
71 /*
72  * Tunable parameter for debugging or performance analysis.  Setting
73  * zfs_nocacheflush will cause corruption on power loss if a volatile
74  * out-of-order write cache is enabled.
75  */
76 boolean_t zfs_nocacheflush = B_FALSE;
77 
78 static kmem_cache_t *zil_lwb_cache;
79 
80 static boolean_t zil_empty(zilog_t *zilog);
81 
82 static int
83 zil_dva_compare(const void *x1, const void *x2)
84 {
85 	const dva_t *dva1 = x1;
86 	const dva_t *dva2 = x2;
87 
88 	if (DVA_GET_VDEV(dva1) < DVA_GET_VDEV(dva2))
89 		return (-1);
90 	if (DVA_GET_VDEV(dva1) > DVA_GET_VDEV(dva2))
91 		return (1);
92 
93 	if (DVA_GET_OFFSET(dva1) < DVA_GET_OFFSET(dva2))
94 		return (-1);
95 	if (DVA_GET_OFFSET(dva1) > DVA_GET_OFFSET(dva2))
96 		return (1);
97 
98 	return (0);
99 }
100 
101 static void
102 zil_dva_tree_init(avl_tree_t *t)
103 {
104 	avl_create(t, zil_dva_compare, sizeof (zil_dva_node_t),
105 	    offsetof(zil_dva_node_t, zn_node));
106 }
107 
108 static void
109 zil_dva_tree_fini(avl_tree_t *t)
110 {
111 	zil_dva_node_t *zn;
112 	void *cookie = NULL;
113 
114 	while ((zn = avl_destroy_nodes(t, &cookie)) != NULL)
115 		kmem_free(zn, sizeof (zil_dva_node_t));
116 
117 	avl_destroy(t);
118 }
119 
120 static int
121 zil_dva_tree_add(avl_tree_t *t, dva_t *dva)
122 {
123 	zil_dva_node_t *zn;
124 	avl_index_t where;
125 
126 	if (avl_find(t, dva, &where) != NULL)
127 		return (EEXIST);
128 
129 	zn = kmem_alloc(sizeof (zil_dva_node_t), KM_SLEEP);
130 	zn->zn_dva = *dva;
131 	avl_insert(t, zn, where);
132 
133 	return (0);
134 }
135 
136 static zil_header_t *
137 zil_header_in_syncing_context(zilog_t *zilog)
138 {
139 	return ((zil_header_t *)zilog->zl_header);
140 }
141 
142 static void
143 zil_init_log_chain(zilog_t *zilog, blkptr_t *bp)
144 {
145 	zio_cksum_t *zc = &bp->blk_cksum;
146 
147 	zc->zc_word[ZIL_ZC_GUID_0] = spa_get_random(-1ULL);
148 	zc->zc_word[ZIL_ZC_GUID_1] = spa_get_random(-1ULL);
149 	zc->zc_word[ZIL_ZC_OBJSET] = dmu_objset_id(zilog->zl_os);
150 	zc->zc_word[ZIL_ZC_SEQ] = 1ULL;
151 }
152 
153 /*
154  * Read a log block, make sure it's valid, and byteswap it if necessary.
155  */
156 static int
157 zil_read_log_block(zilog_t *zilog, const blkptr_t *bp, arc_buf_t **abufpp)
158 {
159 	blkptr_t blk = *bp;
160 	zbookmark_t zb;
161 	uint32_t aflags = ARC_WAIT;
162 	int error;
163 
164 	zb.zb_objset = bp->blk_cksum.zc_word[ZIL_ZC_OBJSET];
165 	zb.zb_object = 0;
166 	zb.zb_level = -1;
167 	zb.zb_blkid = bp->blk_cksum.zc_word[ZIL_ZC_SEQ];
168 
169 	*abufpp = NULL;
170 
171 	/*
172 	 * We shouldn't be doing any scrubbing while we're doing log
173 	 * replay, it's OK to not lock.
174 	 */
175 	error = arc_read_nolock(NULL, zilog->zl_spa, &blk,
176 	    arc_getbuf_func, abufpp, ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL |
177 	    ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SCRUB, &aflags, &zb);
178 
179 	if (error == 0) {
180 		char *data = (*abufpp)->b_data;
181 		uint64_t blksz = BP_GET_LSIZE(bp);
182 		zil_trailer_t *ztp = (zil_trailer_t *)(data + blksz) - 1;
183 		zio_cksum_t cksum = bp->blk_cksum;
184 
185 		/*
186 		 * Validate the checksummed log block.
187 		 *
188 		 * Sequence numbers should be... sequential.  The checksum
189 		 * verifier for the next block should be bp's checksum plus 1.
190 		 *
191 		 * Also check the log chain linkage and size used.
192 		 */
193 		cksum.zc_word[ZIL_ZC_SEQ]++;
194 
195 		if (bcmp(&cksum, &ztp->zit_next_blk.blk_cksum,
196 		    sizeof (cksum)) || BP_IS_HOLE(&ztp->zit_next_blk) ||
197 		    (ztp->zit_nused > (blksz - sizeof (zil_trailer_t)))) {
198 			error = ECKSUM;
199 		}
200 
201 		if (error) {
202 			VERIFY(arc_buf_remove_ref(*abufpp, abufpp) == 1);
203 			*abufpp = NULL;
204 		}
205 	}
206 
207 	dprintf("error %d on %llu:%llu\n", error, zb.zb_objset, zb.zb_blkid);
208 
209 	return (error);
210 }
211 
212 /*
213  * Parse the intent log, and call parse_func for each valid record within.
214  * Return the highest sequence number.
215  */
216 uint64_t
217 zil_parse(zilog_t *zilog, zil_parse_blk_func_t *parse_blk_func,
218     zil_parse_lr_func_t *parse_lr_func, void *arg, uint64_t txg)
219 {
220 	const zil_header_t *zh = zilog->zl_header;
221 	uint64_t claim_seq = zh->zh_claim_seq;
222 	uint64_t seq = 0;
223 	uint64_t max_seq = 0;
224 	blkptr_t blk = zh->zh_log;
225 	arc_buf_t *abuf;
226 	char *lrbuf, *lrp;
227 	zil_trailer_t *ztp;
228 	int reclen, error;
229 
230 	if (BP_IS_HOLE(&blk))
231 		return (max_seq);
232 
233 	/*
234 	 * Starting at the block pointed to by zh_log we read the log chain.
235 	 * For each block in the chain we strongly check that block to
236 	 * ensure its validity.  We stop when an invalid block is found.
237 	 * For each block pointer in the chain we call parse_blk_func().
238 	 * For each record in each valid block we call parse_lr_func().
239 	 * If the log has been claimed, stop if we encounter a sequence
240 	 * number greater than the highest claimed sequence number.
241 	 */
242 	zil_dva_tree_init(&zilog->zl_dva_tree);
243 	for (;;) {
244 		seq = blk.blk_cksum.zc_word[ZIL_ZC_SEQ];
245 
246 		if (claim_seq != 0 && seq > claim_seq)
247 			break;
248 
249 		ASSERT(max_seq < seq);
250 		max_seq = seq;
251 
252 		error = zil_read_log_block(zilog, &blk, &abuf);
253 
254 		if (parse_blk_func != NULL)
255 			parse_blk_func(zilog, &blk, arg, txg);
256 
257 		if (error)
258 			break;
259 
260 		lrbuf = abuf->b_data;
261 		ztp = (zil_trailer_t *)(lrbuf + BP_GET_LSIZE(&blk)) - 1;
262 		blk = ztp->zit_next_blk;
263 
264 		if (parse_lr_func == NULL) {
265 			VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
266 			continue;
267 		}
268 
269 		for (lrp = lrbuf; lrp < lrbuf + ztp->zit_nused; lrp += reclen) {
270 			lr_t *lr = (lr_t *)lrp;
271 			reclen = lr->lrc_reclen;
272 			ASSERT3U(reclen, >=, sizeof (lr_t));
273 			parse_lr_func(zilog, lr, arg, txg);
274 		}
275 		VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
276 	}
277 	zil_dva_tree_fini(&zilog->zl_dva_tree);
278 
279 	return (max_seq);
280 }
281 
282 /* ARGSUSED */
283 static void
284 zil_claim_log_block(zilog_t *zilog, blkptr_t *bp, void *tx, uint64_t first_txg)
285 {
286 	spa_t *spa = zilog->zl_spa;
287 	int err;
288 
289 	/*
290 	 * Claim log block if not already committed and not already claimed.
291 	 */
292 	if (bp->blk_birth >= first_txg &&
293 	    zil_dva_tree_add(&zilog->zl_dva_tree, BP_IDENTITY(bp)) == 0) {
294 		err = zio_wait(zio_claim(NULL, spa, first_txg, bp, NULL, NULL,
295 		    ZIO_FLAG_MUSTSUCCEED));
296 		ASSERT(err == 0);
297 	}
298 }
299 
300 static void
301 zil_claim_log_record(zilog_t *zilog, lr_t *lrc, void *tx, uint64_t first_txg)
302 {
303 	if (lrc->lrc_txtype == TX_WRITE) {
304 		lr_write_t *lr = (lr_write_t *)lrc;
305 		zil_claim_log_block(zilog, &lr->lr_blkptr, tx, first_txg);
306 	}
307 }
308 
309 /* ARGSUSED */
310 static void
311 zil_free_log_block(zilog_t *zilog, blkptr_t *bp, void *tx, uint64_t claim_txg)
312 {
313 	zio_free_blk(zilog->zl_spa, bp, dmu_tx_get_txg(tx));
314 }
315 
316 static void
317 zil_free_log_record(zilog_t *zilog, lr_t *lrc, void *tx, uint64_t claim_txg)
318 {
319 	/*
320 	 * If we previously claimed it, we need to free it.
321 	 */
322 	if (claim_txg != 0 && lrc->lrc_txtype == TX_WRITE) {
323 		lr_write_t *lr = (lr_write_t *)lrc;
324 		blkptr_t *bp = &lr->lr_blkptr;
325 		if (bp->blk_birth >= claim_txg &&
326 		    !zil_dva_tree_add(&zilog->zl_dva_tree, BP_IDENTITY(bp))) {
327 			(void) arc_free(NULL, zilog->zl_spa,
328 			    dmu_tx_get_txg(tx), bp, NULL, NULL, ARC_WAIT);
329 		}
330 	}
331 }
332 
333 /*
334  * Create an on-disk intent log.
335  */
336 static void
337 zil_create(zilog_t *zilog)
338 {
339 	const zil_header_t *zh = zilog->zl_header;
340 	lwb_t *lwb;
341 	uint64_t txg = 0;
342 	dmu_tx_t *tx = NULL;
343 	blkptr_t blk;
344 	int error = 0;
345 
346 	/*
347 	 * Wait for any previous destroy to complete.
348 	 */
349 	txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
350 
351 	ASSERT(zh->zh_claim_txg == 0);
352 	ASSERT(zh->zh_replay_seq == 0);
353 
354 	blk = zh->zh_log;
355 
356 	/*
357 	 * If we don't already have an initial log block or we have one
358 	 * but it's the wrong endianness then allocate one.
359 	 */
360 	if (BP_IS_HOLE(&blk) || BP_SHOULD_BYTESWAP(&blk)) {
361 		tx = dmu_tx_create(zilog->zl_os);
362 		(void) dmu_tx_assign(tx, TXG_WAIT);
363 		dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
364 		txg = dmu_tx_get_txg(tx);
365 
366 		if (!BP_IS_HOLE(&blk)) {
367 			zio_free_blk(zilog->zl_spa, &blk, txg);
368 			BP_ZERO(&blk);
369 		}
370 
371 		error = zio_alloc_blk(zilog->zl_spa, ZIL_MIN_BLKSZ, &blk,
372 		    NULL, txg, zilog->zl_logbias != ZFS_LOGBIAS_LATENCY);
373 
374 		if (error == 0)
375 			zil_init_log_chain(zilog, &blk);
376 	}
377 
378 	/*
379 	 * Allocate a log write buffer (lwb) for the first log block.
380 	 */
381 	if (error == 0) {
382 		lwb = kmem_cache_alloc(zil_lwb_cache, KM_SLEEP);
383 		lwb->lwb_zilog = zilog;
384 		lwb->lwb_blk = blk;
385 		lwb->lwb_nused = 0;
386 		lwb->lwb_sz = BP_GET_LSIZE(&lwb->lwb_blk);
387 		lwb->lwb_buf = zio_buf_alloc(lwb->lwb_sz);
388 		lwb->lwb_max_txg = txg;
389 		lwb->lwb_zio = NULL;
390 
391 		mutex_enter(&zilog->zl_lock);
392 		list_insert_tail(&zilog->zl_lwb_list, lwb);
393 		mutex_exit(&zilog->zl_lock);
394 	}
395 
396 	/*
397 	 * If we just allocated the first log block, commit our transaction
398 	 * and wait for zil_sync() to stuff the block poiner into zh_log.
399 	 * (zh is part of the MOS, so we cannot modify it in open context.)
400 	 */
401 	if (tx != NULL) {
402 		dmu_tx_commit(tx);
403 		txg_wait_synced(zilog->zl_dmu_pool, txg);
404 	}
405 
406 	ASSERT(bcmp(&blk, &zh->zh_log, sizeof (blk)) == 0);
407 }
408 
409 /*
410  * In one tx, free all log blocks and clear the log header.
411  * If keep_first is set, then we're replaying a log with no content.
412  * We want to keep the first block, however, so that the first
413  * synchronous transaction doesn't require a txg_wait_synced()
414  * in zil_create().  We don't need to txg_wait_synced() here either
415  * when keep_first is set, because both zil_create() and zil_destroy()
416  * will wait for any in-progress destroys to complete.
417  */
418 void
419 zil_destroy(zilog_t *zilog, boolean_t keep_first)
420 {
421 	const zil_header_t *zh = zilog->zl_header;
422 	lwb_t *lwb;
423 	dmu_tx_t *tx;
424 	uint64_t txg;
425 
426 	/*
427 	 * Wait for any previous destroy to complete.
428 	 */
429 	txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
430 
431 	if (BP_IS_HOLE(&zh->zh_log))
432 		return;
433 
434 	tx = dmu_tx_create(zilog->zl_os);
435 	(void) dmu_tx_assign(tx, TXG_WAIT);
436 	dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
437 	txg = dmu_tx_get_txg(tx);
438 
439 	mutex_enter(&zilog->zl_lock);
440 
441 	ASSERT3U(zilog->zl_destroy_txg, <, txg);
442 	zilog->zl_destroy_txg = txg;
443 
444 	if (!list_is_empty(&zilog->zl_lwb_list)) {
445 		ASSERT(zh->zh_claim_txg == 0);
446 		zilog->zl_keep_first = B_FALSE;
447 		while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
448 			list_remove(&zilog->zl_lwb_list, lwb);
449 			if (lwb->lwb_buf != NULL)
450 				zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
451 			zio_free_blk(zilog->zl_spa, &lwb->lwb_blk, txg);
452 			kmem_cache_free(zil_lwb_cache, lwb);
453 		}
454 	} else {
455 		zilog->zl_keep_first = keep_first;
456 		if (zh->zh_flags & ZIL_REPLAY_NEEDED) {
457 			ASSERT(!keep_first);
458 			(void) zil_parse(zilog, zil_free_log_block,
459 			    zil_free_log_record, tx, zh->zh_claim_txg);
460 		} else {
461 			/*
462 			 * Would like to assert zil_empty() but that
463 			 * would force us to read the log chain which
464 			 * requires us to do I/O to the log. This is
465 			 * overkill since we really just want to destroy
466 			 * the chain anyway.
467 			 */
468 			if (!keep_first) {
469 				blkptr_t bp = zh->zh_log;
470 				zio_free_blk(zilog->zl_spa, &bp, txg);
471 			}
472 		}
473 	}
474 	mutex_exit(&zilog->zl_lock);
475 
476 	dmu_tx_commit(tx);
477 }
478 
479 /*
480  * return true if the initial log block is not valid
481  */
482 static boolean_t
483 zil_empty(zilog_t *zilog)
484 {
485 	const zil_header_t *zh = zilog->zl_header;
486 	arc_buf_t *abuf = NULL;
487 
488 	if (BP_IS_HOLE(&zh->zh_log))
489 		return (B_TRUE);
490 
491 	if (zil_read_log_block(zilog, &zh->zh_log, &abuf) != 0)
492 		return (B_TRUE);
493 
494 	VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
495 	return (B_FALSE);
496 }
497 
498 int
499 zil_claim(char *osname, void *txarg)
500 {
501 	dmu_tx_t *tx = txarg;
502 	uint64_t first_txg = dmu_tx_get_txg(tx);
503 	zilog_t *zilog;
504 	zil_header_t *zh;
505 	objset_t *os;
506 	int error;
507 
508 	error = dmu_objset_hold(osname, FTAG, &os);
509 	if (error) {
510 		cmn_err(CE_WARN, "can't open objset for %s", osname);
511 		return (0);
512 	}
513 
514 	zilog = dmu_objset_zil(os);
515 	zh = zil_header_in_syncing_context(zilog);
516 
517 	if (zilog->zl_spa->spa_log_state == SPA_LOG_CLEAR) {
518 		if (!BP_IS_HOLE(&zh->zh_log))
519 			zio_free_blk(zilog->zl_spa, &zh->zh_log, first_txg);
520 		BP_ZERO(&zh->zh_log);
521 		dsl_dataset_dirty(dmu_objset_ds(os), tx);
522 	}
523 
524 	/*
525 	 * Record here whether the zil has any records to replay.
526 	 * If the header block pointer is null or the block points
527 	 * to the stubby then we know there are no valid log records.
528 	 * We use the header to store this state as the the zilog gets
529 	 * freed later in dmu_objset_close().
530 	 * The flags (and the rest of the header fields) are cleared in
531 	 * zil_sync() as a result of a zil_destroy(), after replaying the log.
532 	 *
533 	 * Note, the intent log can be empty but still need the
534 	 * stubby to be claimed.
535 	 */
536 	if (!zil_empty(zilog)) {
537 		zh->zh_flags |= ZIL_REPLAY_NEEDED;
538 		dsl_dataset_dirty(dmu_objset_ds(os), tx);
539 	}
540 
541 	/*
542 	 * Claim all log blocks if we haven't already done so, and remember
543 	 * the highest claimed sequence number.  This ensures that if we can
544 	 * read only part of the log now (e.g. due to a missing device),
545 	 * but we can read the entire log later, we will not try to replay
546 	 * or destroy beyond the last block we successfully claimed.
547 	 */
548 	ASSERT3U(zh->zh_claim_txg, <=, first_txg);
549 	if (zh->zh_claim_txg == 0 && !BP_IS_HOLE(&zh->zh_log)) {
550 		zh->zh_claim_txg = first_txg;
551 		zh->zh_claim_seq = zil_parse(zilog, zil_claim_log_block,
552 		    zil_claim_log_record, tx, first_txg);
553 		dsl_dataset_dirty(dmu_objset_ds(os), tx);
554 	}
555 
556 	ASSERT3U(first_txg, ==, (spa_last_synced_txg(zilog->zl_spa) + 1));
557 	dmu_objset_rele(os, FTAG);
558 	return (0);
559 }
560 
561 /*
562  * Check the log by walking the log chain.
563  * Checksum errors are ok as they indicate the end of the chain.
564  * Any other error (no device or read failure) returns an error.
565  */
566 /* ARGSUSED */
567 int
568 zil_check_log_chain(char *osname, void *txarg)
569 {
570 	zilog_t *zilog;
571 	zil_header_t *zh;
572 	blkptr_t blk;
573 	arc_buf_t *abuf;
574 	objset_t *os;
575 	char *lrbuf;
576 	zil_trailer_t *ztp;
577 	int error;
578 
579 	error = dmu_objset_hold(osname, FTAG, &os);
580 	if (error) {
581 		cmn_err(CE_WARN, "can't open objset for %s", osname);
582 		return (0);
583 	}
584 
585 	zilog = dmu_objset_zil(os);
586 	zh = zil_header_in_syncing_context(zilog);
587 	blk = zh->zh_log;
588 	if (BP_IS_HOLE(&blk)) {
589 		dmu_objset_rele(os, FTAG);
590 		return (0); /* no chain */
591 	}
592 
593 	for (;;) {
594 		error = zil_read_log_block(zilog, &blk, &abuf);
595 		if (error)
596 			break;
597 		lrbuf = abuf->b_data;
598 		ztp = (zil_trailer_t *)(lrbuf + BP_GET_LSIZE(&blk)) - 1;
599 		blk = ztp->zit_next_blk;
600 		VERIFY(arc_buf_remove_ref(abuf, &abuf) == 1);
601 	}
602 	dmu_objset_rele(os, FTAG);
603 	if (error == ECKSUM)
604 		return (0); /* normal end of chain */
605 	return (error);
606 }
607 
608 static int
609 zil_vdev_compare(const void *x1, const void *x2)
610 {
611 	uint64_t v1 = ((zil_vdev_node_t *)x1)->zv_vdev;
612 	uint64_t v2 = ((zil_vdev_node_t *)x2)->zv_vdev;
613 
614 	if (v1 < v2)
615 		return (-1);
616 	if (v1 > v2)
617 		return (1);
618 
619 	return (0);
620 }
621 
622 void
623 zil_add_block(zilog_t *zilog, blkptr_t *bp)
624 {
625 	avl_tree_t *t = &zilog->zl_vdev_tree;
626 	avl_index_t where;
627 	zil_vdev_node_t *zv, zvsearch;
628 	int ndvas = BP_GET_NDVAS(bp);
629 	int i;
630 
631 	if (zfs_nocacheflush)
632 		return;
633 
634 	ASSERT(zilog->zl_writer);
635 
636 	/*
637 	 * Even though we're zl_writer, we still need a lock because the
638 	 * zl_get_data() callbacks may have dmu_sync() done callbacks
639 	 * that will run concurrently.
640 	 */
641 	mutex_enter(&zilog->zl_vdev_lock);
642 	for (i = 0; i < ndvas; i++) {
643 		zvsearch.zv_vdev = DVA_GET_VDEV(&bp->blk_dva[i]);
644 		if (avl_find(t, &zvsearch, &where) == NULL) {
645 			zv = kmem_alloc(sizeof (*zv), KM_SLEEP);
646 			zv->zv_vdev = zvsearch.zv_vdev;
647 			avl_insert(t, zv, where);
648 		}
649 	}
650 	mutex_exit(&zilog->zl_vdev_lock);
651 }
652 
653 void
654 zil_flush_vdevs(zilog_t *zilog)
655 {
656 	spa_t *spa = zilog->zl_spa;
657 	avl_tree_t *t = &zilog->zl_vdev_tree;
658 	void *cookie = NULL;
659 	zil_vdev_node_t *zv;
660 	zio_t *zio;
661 
662 	ASSERT(zilog->zl_writer);
663 
664 	/*
665 	 * We don't need zl_vdev_lock here because we're the zl_writer,
666 	 * and all zl_get_data() callbacks are done.
667 	 */
668 	if (avl_numnodes(t) == 0)
669 		return;
670 
671 	spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
672 
673 	zio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL);
674 
675 	while ((zv = avl_destroy_nodes(t, &cookie)) != NULL) {
676 		vdev_t *vd = vdev_lookup_top(spa, zv->zv_vdev);
677 		if (vd != NULL)
678 			zio_flush(zio, vd);
679 		kmem_free(zv, sizeof (*zv));
680 	}
681 
682 	/*
683 	 * Wait for all the flushes to complete.  Not all devices actually
684 	 * support the DKIOCFLUSHWRITECACHE ioctl, so it's OK if it fails.
685 	 */
686 	(void) zio_wait(zio);
687 
688 	spa_config_exit(spa, SCL_STATE, FTAG);
689 }
690 
691 /*
692  * Function called when a log block write completes
693  */
694 static void
695 zil_lwb_write_done(zio_t *zio)
696 {
697 	lwb_t *lwb = zio->io_private;
698 	zilog_t *zilog = lwb->lwb_zilog;
699 
700 	ASSERT(BP_GET_COMPRESS(zio->io_bp) == ZIO_COMPRESS_OFF);
701 	ASSERT(BP_GET_CHECKSUM(zio->io_bp) == ZIO_CHECKSUM_ZILOG);
702 	ASSERT(BP_GET_TYPE(zio->io_bp) == DMU_OT_INTENT_LOG);
703 	ASSERT(BP_GET_LEVEL(zio->io_bp) == 0);
704 	ASSERT(BP_GET_BYTEORDER(zio->io_bp) == ZFS_HOST_BYTEORDER);
705 	ASSERT(!BP_IS_GANG(zio->io_bp));
706 	ASSERT(!BP_IS_HOLE(zio->io_bp));
707 	ASSERT(zio->io_bp->blk_fill == 0);
708 
709 	/*
710 	 * Ensure the lwb buffer pointer is cleared before releasing
711 	 * the txg. If we have had an allocation failure and
712 	 * the txg is waiting to sync then we want want zil_sync()
713 	 * to remove the lwb so that it's not picked up as the next new
714 	 * one in zil_commit_writer(). zil_sync() will only remove
715 	 * the lwb if lwb_buf is null.
716 	 */
717 	zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
718 	mutex_enter(&zilog->zl_lock);
719 	lwb->lwb_buf = NULL;
720 	if (zio->io_error)
721 		zilog->zl_log_error = B_TRUE;
722 
723 	/*
724 	 * Now that we've written this log block, we have a stable pointer
725 	 * to the next block in the chain, so it's OK to let the txg in
726 	 * which we allocated the next block sync. We still have the
727 	 * zl_lock to ensure zil_sync doesn't kmem free the lwb.
728 	 */
729 	txg_rele_to_sync(&lwb->lwb_txgh);
730 	mutex_exit(&zilog->zl_lock);
731 }
732 
733 /*
734  * Initialize the io for a log block.
735  */
736 static void
737 zil_lwb_write_init(zilog_t *zilog, lwb_t *lwb)
738 {
739 	zbookmark_t zb;
740 
741 	zb.zb_objset = lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_OBJSET];
742 	zb.zb_object = 0;
743 	zb.zb_level = -1;
744 	zb.zb_blkid = lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_SEQ];
745 
746 	if (zilog->zl_root_zio == NULL) {
747 		zilog->zl_root_zio = zio_root(zilog->zl_spa, NULL, NULL,
748 		    ZIO_FLAG_CANFAIL);
749 	}
750 	if (lwb->lwb_zio == NULL) {
751 		lwb->lwb_zio = zio_rewrite(zilog->zl_root_zio, zilog->zl_spa,
752 		    0, &lwb->lwb_blk, lwb->lwb_buf, lwb->lwb_sz,
753 		    zil_lwb_write_done, lwb, ZIO_PRIORITY_LOG_WRITE,
754 		    ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE, &zb);
755 	}
756 }
757 
758 /*
759  * Start a log block write and advance to the next log block.
760  * Calls are serialized.
761  */
762 static lwb_t *
763 zil_lwb_write_start(zilog_t *zilog, lwb_t *lwb)
764 {
765 	lwb_t *nlwb;
766 	zil_trailer_t *ztp = (zil_trailer_t *)(lwb->lwb_buf + lwb->lwb_sz) - 1;
767 	spa_t *spa = zilog->zl_spa;
768 	blkptr_t *bp = &ztp->zit_next_blk;
769 	uint64_t txg;
770 	uint64_t zil_blksz;
771 	int error;
772 
773 	ASSERT(lwb->lwb_nused <= ZIL_BLK_DATA_SZ(lwb));
774 
775 	/*
776 	 * Allocate the next block and save its address in this block
777 	 * before writing it in order to establish the log chain.
778 	 * Note that if the allocation of nlwb synced before we wrote
779 	 * the block that points at it (lwb), we'd leak it if we crashed.
780 	 * Therefore, we don't do txg_rele_to_sync() until zil_lwb_write_done().
781 	 */
782 	txg = txg_hold_open(zilog->zl_dmu_pool, &lwb->lwb_txgh);
783 	txg_rele_to_quiesce(&lwb->lwb_txgh);
784 
785 	/*
786 	 * Pick a ZIL blocksize. We request a size that is the
787 	 * maximum of the previous used size, the current used size and
788 	 * the amount waiting in the queue.
789 	 */
790 	zil_blksz = MAX(zilog->zl_prev_used,
791 	    zilog->zl_cur_used + sizeof (*ztp));
792 	zil_blksz = MAX(zil_blksz, zilog->zl_itx_list_sz + sizeof (*ztp));
793 	zil_blksz = P2ROUNDUP_TYPED(zil_blksz, ZIL_MIN_BLKSZ, uint64_t);
794 	if (zil_blksz > ZIL_MAX_BLKSZ)
795 		zil_blksz = ZIL_MAX_BLKSZ;
796 
797 	BP_ZERO(bp);
798 	/* pass the old blkptr in order to spread log blocks across devs */
799 	error = zio_alloc_blk(spa, zil_blksz, bp, &lwb->lwb_blk, txg,
800 	    zilog->zl_logbias != ZFS_LOGBIAS_LATENCY);
801 	if (error) {
802 		dmu_tx_t *tx = dmu_tx_create_assigned(zilog->zl_dmu_pool, txg);
803 
804 		/*
805 		 * We dirty the dataset to ensure that zil_sync() will
806 		 * be called to remove this lwb from our zl_lwb_list.
807 		 * Failing to do so, may leave an lwb with a NULL lwb_buf
808 		 * hanging around on the zl_lwb_list.
809 		 */
810 		dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
811 		dmu_tx_commit(tx);
812 
813 		/*
814 		 * Since we've just experienced an allocation failure so we
815 		 * terminate the current lwb and send it on its way.
816 		 */
817 		ztp->zit_pad = 0;
818 		ztp->zit_nused = lwb->lwb_nused;
819 		ztp->zit_bt.zbt_cksum = lwb->lwb_blk.blk_cksum;
820 		zio_nowait(lwb->lwb_zio);
821 
822 		/*
823 		 * By returning NULL the caller will call tx_wait_synced()
824 		 */
825 		return (NULL);
826 	}
827 
828 	ASSERT3U(bp->blk_birth, ==, txg);
829 	ztp->zit_pad = 0;
830 	ztp->zit_nused = lwb->lwb_nused;
831 	ztp->zit_bt.zbt_cksum = lwb->lwb_blk.blk_cksum;
832 	bp->blk_cksum = lwb->lwb_blk.blk_cksum;
833 	bp->blk_cksum.zc_word[ZIL_ZC_SEQ]++;
834 
835 	/*
836 	 * Allocate a new log write buffer (lwb).
837 	 */
838 	nlwb = kmem_cache_alloc(zil_lwb_cache, KM_SLEEP);
839 
840 	nlwb->lwb_zilog = zilog;
841 	nlwb->lwb_blk = *bp;
842 	nlwb->lwb_nused = 0;
843 	nlwb->lwb_sz = BP_GET_LSIZE(&nlwb->lwb_blk);
844 	nlwb->lwb_buf = zio_buf_alloc(nlwb->lwb_sz);
845 	nlwb->lwb_max_txg = txg;
846 	nlwb->lwb_zio = NULL;
847 
848 	/*
849 	 * Put new lwb at the end of the log chain
850 	 */
851 	mutex_enter(&zilog->zl_lock);
852 	list_insert_tail(&zilog->zl_lwb_list, nlwb);
853 	mutex_exit(&zilog->zl_lock);
854 
855 	/* Record the block for later vdev flushing */
856 	zil_add_block(zilog, &lwb->lwb_blk);
857 
858 	/*
859 	 * kick off the write for the old log block
860 	 */
861 	dprintf_bp(&lwb->lwb_blk, "lwb %p txg %llu: ", lwb, txg);
862 	ASSERT(lwb->lwb_zio);
863 	zio_nowait(lwb->lwb_zio);
864 
865 	return (nlwb);
866 }
867 
868 static lwb_t *
869 zil_lwb_commit(zilog_t *zilog, itx_t *itx, lwb_t *lwb)
870 {
871 	lr_t *lrc = &itx->itx_lr; /* common log record */
872 	lr_write_t *lr = (lr_write_t *)lrc;
873 	uint64_t txg = lrc->lrc_txg;
874 	uint64_t reclen = lrc->lrc_reclen;
875 	uint64_t dlen;
876 
877 	if (lwb == NULL)
878 		return (NULL);
879 	ASSERT(lwb->lwb_buf != NULL);
880 
881 	if (lrc->lrc_txtype == TX_WRITE && itx->itx_wr_state == WR_NEED_COPY)
882 		dlen = P2ROUNDUP_TYPED(
883 		    lr->lr_length, sizeof (uint64_t), uint64_t);
884 	else
885 		dlen = 0;
886 
887 	zilog->zl_cur_used += (reclen + dlen);
888 
889 	zil_lwb_write_init(zilog, lwb);
890 
891 	/*
892 	 * If this record won't fit in the current log block, start a new one.
893 	 */
894 	if (lwb->lwb_nused + reclen + dlen > ZIL_BLK_DATA_SZ(lwb)) {
895 		lwb = zil_lwb_write_start(zilog, lwb);
896 		if (lwb == NULL)
897 			return (NULL);
898 		zil_lwb_write_init(zilog, lwb);
899 		ASSERT(lwb->lwb_nused == 0);
900 		if (reclen + dlen > ZIL_BLK_DATA_SZ(lwb)) {
901 			txg_wait_synced(zilog->zl_dmu_pool, txg);
902 			return (lwb);
903 		}
904 	}
905 
906 	/*
907 	 * Update the lrc_seq, to be log record sequence number. See zil.h
908 	 * Then copy the record to the log buffer.
909 	 */
910 	lrc->lrc_seq = ++zilog->zl_lr_seq; /* we are single threaded */
911 	bcopy(lrc, lwb->lwb_buf + lwb->lwb_nused, reclen);
912 
913 	/*
914 	 * If it's a write, fetch the data or get its blkptr as appropriate.
915 	 */
916 	if (lrc->lrc_txtype == TX_WRITE) {
917 		if (txg > spa_freeze_txg(zilog->zl_spa))
918 			txg_wait_synced(zilog->zl_dmu_pool, txg);
919 		if (itx->itx_wr_state != WR_COPIED) {
920 			char *dbuf;
921 			int error;
922 
923 			/* alignment is guaranteed */
924 			lr = (lr_write_t *)(lwb->lwb_buf + lwb->lwb_nused);
925 			if (dlen) {
926 				ASSERT(itx->itx_wr_state == WR_NEED_COPY);
927 				dbuf = lwb->lwb_buf + lwb->lwb_nused + reclen;
928 				lr->lr_common.lrc_reclen += dlen;
929 			} else {
930 				ASSERT(itx->itx_wr_state == WR_INDIRECT);
931 				dbuf = NULL;
932 			}
933 			error = zilog->zl_get_data(
934 			    itx->itx_private, lr, dbuf, lwb->lwb_zio);
935 			if (error == EIO) {
936 				txg_wait_synced(zilog->zl_dmu_pool, txg);
937 				return (lwb);
938 			}
939 			if (error) {
940 				ASSERT(error == ENOENT || error == EEXIST ||
941 				    error == EALREADY);
942 				return (lwb);
943 			}
944 		}
945 	}
946 
947 	lwb->lwb_nused += reclen + dlen;
948 	lwb->lwb_max_txg = MAX(lwb->lwb_max_txg, txg);
949 	ASSERT3U(lwb->lwb_nused, <=, ZIL_BLK_DATA_SZ(lwb));
950 	ASSERT3U(P2PHASE(lwb->lwb_nused, sizeof (uint64_t)), ==, 0);
951 
952 	return (lwb);
953 }
954 
955 itx_t *
956 zil_itx_create(uint64_t txtype, size_t lrsize)
957 {
958 	itx_t *itx;
959 
960 	lrsize = P2ROUNDUP_TYPED(lrsize, sizeof (uint64_t), size_t);
961 
962 	itx = kmem_alloc(offsetof(itx_t, itx_lr) + lrsize, KM_SLEEP);
963 	itx->itx_lr.lrc_txtype = txtype;
964 	itx->itx_lr.lrc_reclen = lrsize;
965 	itx->itx_sod = lrsize; /* if write & WR_NEED_COPY will be increased */
966 	itx->itx_lr.lrc_seq = 0;	/* defensive */
967 
968 	return (itx);
969 }
970 
971 uint64_t
972 zil_itx_assign(zilog_t *zilog, itx_t *itx, dmu_tx_t *tx)
973 {
974 	uint64_t seq;
975 
976 	ASSERT(itx->itx_lr.lrc_seq == 0);
977 
978 	mutex_enter(&zilog->zl_lock);
979 	list_insert_tail(&zilog->zl_itx_list, itx);
980 	zilog->zl_itx_list_sz += itx->itx_sod;
981 	itx->itx_lr.lrc_txg = dmu_tx_get_txg(tx);
982 	itx->itx_lr.lrc_seq = seq = ++zilog->zl_itx_seq;
983 	mutex_exit(&zilog->zl_lock);
984 
985 	return (seq);
986 }
987 
988 /*
989  * Free up all in-memory intent log transactions that have now been synced.
990  */
991 static void
992 zil_itx_clean(zilog_t *zilog)
993 {
994 	uint64_t synced_txg = spa_last_synced_txg(zilog->zl_spa);
995 	uint64_t freeze_txg = spa_freeze_txg(zilog->zl_spa);
996 	list_t clean_list;
997 	itx_t *itx;
998 
999 	list_create(&clean_list, sizeof (itx_t), offsetof(itx_t, itx_node));
1000 
1001 	mutex_enter(&zilog->zl_lock);
1002 	/* wait for a log writer to finish walking list */
1003 	while (zilog->zl_writer) {
1004 		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1005 	}
1006 
1007 	/*
1008 	 * Move the sync'd log transactions to a separate list so we can call
1009 	 * kmem_free without holding the zl_lock.
1010 	 *
1011 	 * There is no need to set zl_writer as we don't drop zl_lock here
1012 	 */
1013 	while ((itx = list_head(&zilog->zl_itx_list)) != NULL &&
1014 	    itx->itx_lr.lrc_txg <= MIN(synced_txg, freeze_txg)) {
1015 		list_remove(&zilog->zl_itx_list, itx);
1016 		zilog->zl_itx_list_sz -= itx->itx_sod;
1017 		list_insert_tail(&clean_list, itx);
1018 	}
1019 	cv_broadcast(&zilog->zl_cv_writer);
1020 	mutex_exit(&zilog->zl_lock);
1021 
1022 	/* destroy sync'd log transactions */
1023 	while ((itx = list_head(&clean_list)) != NULL) {
1024 		list_remove(&clean_list, itx);
1025 		kmem_free(itx, offsetof(itx_t, itx_lr)
1026 		    + itx->itx_lr.lrc_reclen);
1027 	}
1028 	list_destroy(&clean_list);
1029 }
1030 
1031 /*
1032  * If there are any in-memory intent log transactions which have now been
1033  * synced then start up a taskq to free them.
1034  */
1035 void
1036 zil_clean(zilog_t *zilog)
1037 {
1038 	itx_t *itx;
1039 
1040 	mutex_enter(&zilog->zl_lock);
1041 	itx = list_head(&zilog->zl_itx_list);
1042 	if ((itx != NULL) &&
1043 	    (itx->itx_lr.lrc_txg <= spa_last_synced_txg(zilog->zl_spa))) {
1044 		(void) taskq_dispatch(zilog->zl_clean_taskq,
1045 		    (task_func_t *)zil_itx_clean, zilog, TQ_SLEEP);
1046 	}
1047 	mutex_exit(&zilog->zl_lock);
1048 }
1049 
1050 static void
1051 zil_commit_writer(zilog_t *zilog, uint64_t seq, uint64_t foid)
1052 {
1053 	uint64_t txg;
1054 	uint64_t commit_seq = 0;
1055 	itx_t *itx, *itx_next = (itx_t *)-1;
1056 	lwb_t *lwb;
1057 	spa_t *spa;
1058 
1059 	zilog->zl_writer = B_TRUE;
1060 	ASSERT(zilog->zl_root_zio == NULL);
1061 	spa = zilog->zl_spa;
1062 
1063 	if (zilog->zl_suspend) {
1064 		lwb = NULL;
1065 	} else {
1066 		lwb = list_tail(&zilog->zl_lwb_list);
1067 		if (lwb == NULL) {
1068 			/*
1069 			 * Return if there's nothing to flush before we
1070 			 * dirty the fs by calling zil_create()
1071 			 */
1072 			if (list_is_empty(&zilog->zl_itx_list)) {
1073 				zilog->zl_writer = B_FALSE;
1074 				return;
1075 			}
1076 			mutex_exit(&zilog->zl_lock);
1077 			zil_create(zilog);
1078 			mutex_enter(&zilog->zl_lock);
1079 			lwb = list_tail(&zilog->zl_lwb_list);
1080 		}
1081 	}
1082 
1083 	/* Loop through in-memory log transactions filling log blocks. */
1084 	DTRACE_PROBE1(zil__cw1, zilog_t *, zilog);
1085 	for (;;) {
1086 		/*
1087 		 * Find the next itx to push:
1088 		 * Push all transactions related to specified foid and all
1089 		 * other transactions except TX_WRITE, TX_TRUNCATE,
1090 		 * TX_SETATTR and TX_ACL for all other files.
1091 		 */
1092 		if (itx_next != (itx_t *)-1)
1093 			itx = itx_next;
1094 		else
1095 			itx = list_head(&zilog->zl_itx_list);
1096 		for (; itx != NULL; itx = list_next(&zilog->zl_itx_list, itx)) {
1097 			if (foid == 0) /* push all foids? */
1098 				break;
1099 			if (itx->itx_sync) /* push all O_[D]SYNC */
1100 				break;
1101 			switch (itx->itx_lr.lrc_txtype) {
1102 			case TX_SETATTR:
1103 			case TX_WRITE:
1104 			case TX_TRUNCATE:
1105 			case TX_ACL:
1106 				/* lr_foid is same offset for these records */
1107 				if (((lr_write_t *)&itx->itx_lr)->lr_foid
1108 				    != foid) {
1109 					continue; /* skip this record */
1110 				}
1111 			}
1112 			break;
1113 		}
1114 		if (itx == NULL)
1115 			break;
1116 
1117 		if ((itx->itx_lr.lrc_seq > seq) &&
1118 		    ((lwb == NULL) || (lwb->lwb_nused == 0) ||
1119 		    (lwb->lwb_nused + itx->itx_sod > ZIL_BLK_DATA_SZ(lwb)))) {
1120 			break;
1121 		}
1122 
1123 		/*
1124 		 * Save the next pointer.  Even though we soon drop
1125 		 * zl_lock all threads that may change the list
1126 		 * (another writer or zil_itx_clean) can't do so until
1127 		 * they have zl_writer.
1128 		 */
1129 		itx_next = list_next(&zilog->zl_itx_list, itx);
1130 		list_remove(&zilog->zl_itx_list, itx);
1131 		zilog->zl_itx_list_sz -= itx->itx_sod;
1132 		mutex_exit(&zilog->zl_lock);
1133 		txg = itx->itx_lr.lrc_txg;
1134 		ASSERT(txg);
1135 
1136 		if (txg > spa_last_synced_txg(spa) ||
1137 		    txg > spa_freeze_txg(spa))
1138 			lwb = zil_lwb_commit(zilog, itx, lwb);
1139 		kmem_free(itx, offsetof(itx_t, itx_lr)
1140 		    + itx->itx_lr.lrc_reclen);
1141 		mutex_enter(&zilog->zl_lock);
1142 	}
1143 	DTRACE_PROBE1(zil__cw2, zilog_t *, zilog);
1144 	/* determine commit sequence number */
1145 	itx = list_head(&zilog->zl_itx_list);
1146 	if (itx)
1147 		commit_seq = itx->itx_lr.lrc_seq;
1148 	else
1149 		commit_seq = zilog->zl_itx_seq;
1150 	mutex_exit(&zilog->zl_lock);
1151 
1152 	/* write the last block out */
1153 	if (lwb != NULL && lwb->lwb_zio != NULL)
1154 		lwb = zil_lwb_write_start(zilog, lwb);
1155 
1156 	zilog->zl_prev_used = zilog->zl_cur_used;
1157 	zilog->zl_cur_used = 0;
1158 
1159 	/*
1160 	 * Wait if necessary for the log blocks to be on stable storage.
1161 	 */
1162 	if (zilog->zl_root_zio) {
1163 		DTRACE_PROBE1(zil__cw3, zilog_t *, zilog);
1164 		(void) zio_wait(zilog->zl_root_zio);
1165 		zilog->zl_root_zio = NULL;
1166 		DTRACE_PROBE1(zil__cw4, zilog_t *, zilog);
1167 		zil_flush_vdevs(zilog);
1168 	}
1169 
1170 	if (zilog->zl_log_error || lwb == NULL) {
1171 		zilog->zl_log_error = 0;
1172 		txg_wait_synced(zilog->zl_dmu_pool, 0);
1173 	}
1174 
1175 	mutex_enter(&zilog->zl_lock);
1176 	zilog->zl_writer = B_FALSE;
1177 
1178 	ASSERT3U(commit_seq, >=, zilog->zl_commit_seq);
1179 	zilog->zl_commit_seq = commit_seq;
1180 }
1181 
1182 /*
1183  * Push zfs transactions to stable storage up to the supplied sequence number.
1184  * If foid is 0 push out all transactions, otherwise push only those
1185  * for that file or might have been used to create that file.
1186  */
1187 void
1188 zil_commit(zilog_t *zilog, uint64_t seq, uint64_t foid)
1189 {
1190 	if (zilog == NULL || seq == 0)
1191 		return;
1192 
1193 	mutex_enter(&zilog->zl_lock);
1194 
1195 	seq = MIN(seq, zilog->zl_itx_seq);	/* cap seq at largest itx seq */
1196 
1197 	while (zilog->zl_writer) {
1198 		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1199 		if (seq < zilog->zl_commit_seq) {
1200 			mutex_exit(&zilog->zl_lock);
1201 			return;
1202 		}
1203 	}
1204 	zil_commit_writer(zilog, seq, foid); /* drops zl_lock */
1205 	/* wake up others waiting on the commit */
1206 	cv_broadcast(&zilog->zl_cv_writer);
1207 	mutex_exit(&zilog->zl_lock);
1208 }
1209 
1210 /*
1211  * Called in syncing context to free committed log blocks and update log header.
1212  */
1213 void
1214 zil_sync(zilog_t *zilog, dmu_tx_t *tx)
1215 {
1216 	zil_header_t *zh = zil_header_in_syncing_context(zilog);
1217 	uint64_t txg = dmu_tx_get_txg(tx);
1218 	spa_t *spa = zilog->zl_spa;
1219 	lwb_t *lwb;
1220 
1221 	/*
1222 	 * We don't zero out zl_destroy_txg, so make sure we don't try
1223 	 * to destroy it twice.
1224 	 */
1225 	if (spa_sync_pass(spa) != 1)
1226 		return;
1227 
1228 	mutex_enter(&zilog->zl_lock);
1229 
1230 	ASSERT(zilog->zl_stop_sync == 0);
1231 
1232 	zh->zh_replay_seq = zilog->zl_replayed_seq[txg & TXG_MASK];
1233 
1234 	if (zilog->zl_destroy_txg == txg) {
1235 		blkptr_t blk = zh->zh_log;
1236 
1237 		ASSERT(list_head(&zilog->zl_lwb_list) == NULL);
1238 
1239 		bzero(zh, sizeof (zil_header_t));
1240 		bzero(zilog->zl_replayed_seq, sizeof (zilog->zl_replayed_seq));
1241 
1242 		if (zilog->zl_keep_first) {
1243 			/*
1244 			 * If this block was part of log chain that couldn't
1245 			 * be claimed because a device was missing during
1246 			 * zil_claim(), but that device later returns,
1247 			 * then this block could erroneously appear valid.
1248 			 * To guard against this, assign a new GUID to the new
1249 			 * log chain so it doesn't matter what blk points to.
1250 			 */
1251 			zil_init_log_chain(zilog, &blk);
1252 			zh->zh_log = blk;
1253 		}
1254 	}
1255 
1256 	while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
1257 		zh->zh_log = lwb->lwb_blk;
1258 		if (lwb->lwb_buf != NULL || lwb->lwb_max_txg > txg)
1259 			break;
1260 		list_remove(&zilog->zl_lwb_list, lwb);
1261 		zio_free_blk(spa, &lwb->lwb_blk, txg);
1262 		kmem_cache_free(zil_lwb_cache, lwb);
1263 
1264 		/*
1265 		 * If we don't have anything left in the lwb list then
1266 		 * we've had an allocation failure and we need to zero
1267 		 * out the zil_header blkptr so that we don't end
1268 		 * up freeing the same block twice.
1269 		 */
1270 		if (list_head(&zilog->zl_lwb_list) == NULL)
1271 			BP_ZERO(&zh->zh_log);
1272 	}
1273 	mutex_exit(&zilog->zl_lock);
1274 }
1275 
1276 void
1277 zil_init(void)
1278 {
1279 	zil_lwb_cache = kmem_cache_create("zil_lwb_cache",
1280 	    sizeof (struct lwb), 0, NULL, NULL, NULL, NULL, NULL, 0);
1281 }
1282 
1283 void
1284 zil_fini(void)
1285 {
1286 	kmem_cache_destroy(zil_lwb_cache);
1287 }
1288 
1289 void
1290 zil_set_logbias(zilog_t *zilog, uint64_t logbias)
1291 {
1292 	zilog->zl_logbias = logbias;
1293 }
1294 
1295 zilog_t *
1296 zil_alloc(objset_t *os, zil_header_t *zh_phys)
1297 {
1298 	zilog_t *zilog;
1299 
1300 	zilog = kmem_zalloc(sizeof (zilog_t), KM_SLEEP);
1301 
1302 	zilog->zl_header = zh_phys;
1303 	zilog->zl_os = os;
1304 	zilog->zl_spa = dmu_objset_spa(os);
1305 	zilog->zl_dmu_pool = dmu_objset_pool(os);
1306 	zilog->zl_destroy_txg = TXG_INITIAL - 1;
1307 	zilog->zl_logbias = dmu_objset_logbias(os);
1308 
1309 	mutex_init(&zilog->zl_lock, NULL, MUTEX_DEFAULT, NULL);
1310 
1311 	list_create(&zilog->zl_itx_list, sizeof (itx_t),
1312 	    offsetof(itx_t, itx_node));
1313 
1314 	list_create(&zilog->zl_lwb_list, sizeof (lwb_t),
1315 	    offsetof(lwb_t, lwb_node));
1316 
1317 	mutex_init(&zilog->zl_vdev_lock, NULL, MUTEX_DEFAULT, NULL);
1318 
1319 	avl_create(&zilog->zl_vdev_tree, zil_vdev_compare,
1320 	    sizeof (zil_vdev_node_t), offsetof(zil_vdev_node_t, zv_node));
1321 
1322 	cv_init(&zilog->zl_cv_writer, NULL, CV_DEFAULT, NULL);
1323 	cv_init(&zilog->zl_cv_suspend, NULL, CV_DEFAULT, NULL);
1324 
1325 	return (zilog);
1326 }
1327 
1328 void
1329 zil_free(zilog_t *zilog)
1330 {
1331 	lwb_t *lwb;
1332 
1333 	zilog->zl_stop_sync = 1;
1334 
1335 	while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
1336 		list_remove(&zilog->zl_lwb_list, lwb);
1337 		if (lwb->lwb_buf != NULL)
1338 			zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
1339 		kmem_cache_free(zil_lwb_cache, lwb);
1340 	}
1341 	list_destroy(&zilog->zl_lwb_list);
1342 
1343 	avl_destroy(&zilog->zl_vdev_tree);
1344 	mutex_destroy(&zilog->zl_vdev_lock);
1345 
1346 	ASSERT(list_head(&zilog->zl_itx_list) == NULL);
1347 	list_destroy(&zilog->zl_itx_list);
1348 	mutex_destroy(&zilog->zl_lock);
1349 
1350 	cv_destroy(&zilog->zl_cv_writer);
1351 	cv_destroy(&zilog->zl_cv_suspend);
1352 
1353 	kmem_free(zilog, sizeof (zilog_t));
1354 }
1355 
1356 /*
1357  * Open an intent log.
1358  */
1359 zilog_t *
1360 zil_open(objset_t *os, zil_get_data_t *get_data)
1361 {
1362 	zilog_t *zilog = dmu_objset_zil(os);
1363 
1364 	zilog->zl_get_data = get_data;
1365 	zilog->zl_clean_taskq = taskq_create("zil_clean", 1, minclsyspri,
1366 	    2, 2, TASKQ_PREPOPULATE);
1367 
1368 	return (zilog);
1369 }
1370 
1371 /*
1372  * Close an intent log.
1373  */
1374 void
1375 zil_close(zilog_t *zilog)
1376 {
1377 	/*
1378 	 * If the log isn't already committed, mark the objset dirty
1379 	 * (so zil_sync() will be called) and wait for that txg to sync.
1380 	 */
1381 	if (!zil_is_committed(zilog)) {
1382 		uint64_t txg;
1383 		dmu_tx_t *tx = dmu_tx_create(zilog->zl_os);
1384 		(void) dmu_tx_assign(tx, TXG_WAIT);
1385 		dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
1386 		txg = dmu_tx_get_txg(tx);
1387 		dmu_tx_commit(tx);
1388 		txg_wait_synced(zilog->zl_dmu_pool, txg);
1389 	}
1390 
1391 	taskq_destroy(zilog->zl_clean_taskq);
1392 	zilog->zl_clean_taskq = NULL;
1393 	zilog->zl_get_data = NULL;
1394 
1395 	zil_itx_clean(zilog);
1396 	ASSERT(list_head(&zilog->zl_itx_list) == NULL);
1397 }
1398 
1399 /*
1400  * Suspend an intent log.  While in suspended mode, we still honor
1401  * synchronous semantics, but we rely on txg_wait_synced() to do it.
1402  * We suspend the log briefly when taking a snapshot so that the snapshot
1403  * contains all the data it's supposed to, and has an empty intent log.
1404  */
1405 int
1406 zil_suspend(zilog_t *zilog)
1407 {
1408 	const zil_header_t *zh = zilog->zl_header;
1409 
1410 	mutex_enter(&zilog->zl_lock);
1411 	if (zh->zh_flags & ZIL_REPLAY_NEEDED) {		/* unplayed log */
1412 		mutex_exit(&zilog->zl_lock);
1413 		return (EBUSY);
1414 	}
1415 	if (zilog->zl_suspend++ != 0) {
1416 		/*
1417 		 * Someone else already began a suspend.
1418 		 * Just wait for them to finish.
1419 		 */
1420 		while (zilog->zl_suspending)
1421 			cv_wait(&zilog->zl_cv_suspend, &zilog->zl_lock);
1422 		mutex_exit(&zilog->zl_lock);
1423 		return (0);
1424 	}
1425 	zilog->zl_suspending = B_TRUE;
1426 	mutex_exit(&zilog->zl_lock);
1427 
1428 	zil_commit(zilog, UINT64_MAX, 0);
1429 
1430 	/*
1431 	 * Wait for any in-flight log writes to complete.
1432 	 */
1433 	mutex_enter(&zilog->zl_lock);
1434 	while (zilog->zl_writer)
1435 		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1436 	mutex_exit(&zilog->zl_lock);
1437 
1438 	zil_destroy(zilog, B_FALSE);
1439 
1440 	mutex_enter(&zilog->zl_lock);
1441 	zilog->zl_suspending = B_FALSE;
1442 	cv_broadcast(&zilog->zl_cv_suspend);
1443 	mutex_exit(&zilog->zl_lock);
1444 
1445 	return (0);
1446 }
1447 
1448 void
1449 zil_resume(zilog_t *zilog)
1450 {
1451 	mutex_enter(&zilog->zl_lock);
1452 	ASSERT(zilog->zl_suspend != 0);
1453 	zilog->zl_suspend--;
1454 	mutex_exit(&zilog->zl_lock);
1455 }
1456 
1457 /*
1458  * Read in the data for the dmu_sync()ed block, and change the log
1459  * record to write this whole block.
1460  */
1461 void
1462 zil_get_replay_data(zilog_t *zilog, lr_write_t *lr)
1463 {
1464 	blkptr_t *wbp = &lr->lr_blkptr;
1465 	char *wbuf = (char *)(lr + 1); /* data follows lr_write_t */
1466 	uint64_t blksz;
1467 
1468 	if (BP_IS_HOLE(wbp)) {	/* compressed to a hole */
1469 		blksz = BP_GET_LSIZE(&lr->lr_blkptr);
1470 		/*
1471 		 * If the blksz is zero then we must be replaying a log
1472 		 * from an version prior to setting the blksize of null blocks.
1473 		 * So we just zero the actual write size reqeusted.
1474 		 */
1475 		if (blksz == 0) {
1476 			bzero(wbuf, lr->lr_length);
1477 			return;
1478 		}
1479 		bzero(wbuf, blksz);
1480 	} else {
1481 		/*
1482 		 * A subsequent write may have overwritten this block, in which
1483 		 * case wbp may have been been freed and reallocated, and our
1484 		 * read of wbp may fail with a checksum error.  We can safely
1485 		 * ignore this because the later write will provide the
1486 		 * correct data.
1487 		 */
1488 		zbookmark_t zb;
1489 
1490 		zb.zb_objset = dmu_objset_id(zilog->zl_os);
1491 		zb.zb_object = lr->lr_foid;
1492 		zb.zb_level = 0;
1493 		zb.zb_blkid = -1; /* unknown */
1494 
1495 		blksz = BP_GET_LSIZE(&lr->lr_blkptr);
1496 		(void) zio_wait(zio_read(NULL, zilog->zl_spa, wbp, wbuf, blksz,
1497 		    NULL, NULL, ZIO_PRIORITY_SYNC_READ,
1498 		    ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE, &zb));
1499 	}
1500 	lr->lr_offset -= lr->lr_offset % blksz;
1501 	lr->lr_length = blksz;
1502 }
1503 
1504 typedef struct zil_replay_arg {
1505 	objset_t	*zr_os;
1506 	zil_replay_func_t **zr_replay;
1507 	void		*zr_arg;
1508 	boolean_t	zr_byteswap;
1509 	char		*zr_lrbuf;
1510 } zil_replay_arg_t;
1511 
1512 static void
1513 zil_replay_log_record(zilog_t *zilog, lr_t *lr, void *zra, uint64_t claim_txg)
1514 {
1515 	zil_replay_arg_t *zr = zra;
1516 	const zil_header_t *zh = zilog->zl_header;
1517 	uint64_t reclen = lr->lrc_reclen;
1518 	uint64_t txtype = lr->lrc_txtype;
1519 	char *name;
1520 	int pass, error;
1521 
1522 	if (!zilog->zl_replay)			/* giving up */
1523 		return;
1524 
1525 	if (lr->lrc_txg < claim_txg)		/* already committed */
1526 		return;
1527 
1528 	if (lr->lrc_seq <= zh->zh_replay_seq)	/* already replayed */
1529 		return;
1530 
1531 	/* Strip case-insensitive bit, still present in log record */
1532 	txtype &= ~TX_CI;
1533 
1534 	if (txtype == 0 || txtype >= TX_MAX_TYPE) {
1535 		error = EINVAL;
1536 		goto bad;
1537 	}
1538 
1539 	/*
1540 	 * Make a copy of the data so we can revise and extend it.
1541 	 */
1542 	bcopy(lr, zr->zr_lrbuf, reclen);
1543 
1544 	/*
1545 	 * The log block containing this lr may have been byteswapped
1546 	 * so that we can easily examine common fields like lrc_txtype.
1547 	 * However, the log is a mix of different data types, and only the
1548 	 * replay vectors know how to byteswap their records.  Therefore, if
1549 	 * the lr was byteswapped, undo it before invoking the replay vector.
1550 	 */
1551 	if (zr->zr_byteswap)
1552 		byteswap_uint64_array(zr->zr_lrbuf, reclen);
1553 
1554 	/*
1555 	 * We must now do two things atomically: replay this log record,
1556 	 * and update the log header sequence number to reflect the fact that
1557 	 * we did so. At the end of each replay function the sequence number
1558 	 * is updated if we are in replay mode.
1559 	 */
1560 	for (pass = 1; pass <= 2; pass++) {
1561 		zilog->zl_replaying_seq = lr->lrc_seq;
1562 		/* Only byteswap (if needed) on the 1st pass.  */
1563 		error = zr->zr_replay[txtype](zr->zr_arg, zr->zr_lrbuf,
1564 		    zr->zr_byteswap && pass == 1);
1565 
1566 		if (!error)
1567 			return;
1568 
1569 		/*
1570 		 * The DMU's dnode layer doesn't see removes until the txg
1571 		 * commits, so a subsequent claim can spuriously fail with
1572 		 * EEXIST. So if we receive any error we try syncing out
1573 		 * any removes then retry the transaction.
1574 		 */
1575 		if (pass == 1)
1576 			txg_wait_synced(spa_get_dsl(zilog->zl_spa), 0);
1577 	}
1578 
1579 bad:
1580 	ASSERT(error);
1581 	name = kmem_alloc(MAXNAMELEN, KM_SLEEP);
1582 	dmu_objset_name(zr->zr_os, name);
1583 	cmn_err(CE_WARN, "ZFS replay transaction error %d, "
1584 	    "dataset %s, seq 0x%llx, txtype %llu %s\n",
1585 	    error, name, (u_longlong_t)lr->lrc_seq, (u_longlong_t)txtype,
1586 	    (lr->lrc_txtype & TX_CI) ? "CI" : "");
1587 	zilog->zl_replay = B_FALSE;
1588 	kmem_free(name, MAXNAMELEN);
1589 }
1590 
1591 /* ARGSUSED */
1592 static void
1593 zil_incr_blks(zilog_t *zilog, blkptr_t *bp, void *arg, uint64_t claim_txg)
1594 {
1595 	zilog->zl_replay_blks++;
1596 }
1597 
1598 /*
1599  * If this dataset has a non-empty intent log, replay it and destroy it.
1600  */
1601 void
1602 zil_replay(objset_t *os, void *arg, zil_replay_func_t *replay_func[TX_MAX_TYPE])
1603 {
1604 	zilog_t *zilog = dmu_objset_zil(os);
1605 	const zil_header_t *zh = zilog->zl_header;
1606 	zil_replay_arg_t zr;
1607 
1608 	if ((zh->zh_flags & ZIL_REPLAY_NEEDED) == 0) {
1609 		zil_destroy(zilog, B_TRUE);
1610 		return;
1611 	}
1612 
1613 	zr.zr_os = os;
1614 	zr.zr_replay = replay_func;
1615 	zr.zr_arg = arg;
1616 	zr.zr_byteswap = BP_SHOULD_BYTESWAP(&zh->zh_log);
1617 	zr.zr_lrbuf = kmem_alloc(2 * SPA_MAXBLOCKSIZE, KM_SLEEP);
1618 
1619 	/*
1620 	 * Wait for in-progress removes to sync before starting replay.
1621 	 */
1622 	txg_wait_synced(zilog->zl_dmu_pool, 0);
1623 
1624 	zilog->zl_replay = B_TRUE;
1625 	zilog->zl_replay_time = lbolt;
1626 	ASSERT(zilog->zl_replay_blks == 0);
1627 	(void) zil_parse(zilog, zil_incr_blks, zil_replay_log_record, &zr,
1628 	    zh->zh_claim_txg);
1629 	kmem_free(zr.zr_lrbuf, 2 * SPA_MAXBLOCKSIZE);
1630 
1631 	zil_destroy(zilog, B_FALSE);
1632 	txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
1633 	zilog->zl_replay = B_FALSE;
1634 }
1635 
1636 /*
1637  * Report whether all transactions are committed
1638  */
1639 int
1640 zil_is_committed(zilog_t *zilog)
1641 {
1642 	lwb_t *lwb;
1643 	int ret;
1644 
1645 	mutex_enter(&zilog->zl_lock);
1646 	while (zilog->zl_writer)
1647 		cv_wait(&zilog->zl_cv_writer, &zilog->zl_lock);
1648 
1649 	/* recent unpushed intent log transactions? */
1650 	if (!list_is_empty(&zilog->zl_itx_list)) {
1651 		ret = B_FALSE;
1652 		goto out;
1653 	}
1654 
1655 	/* intent log never used? */
1656 	lwb = list_head(&zilog->zl_lwb_list);
1657 	if (lwb == NULL) {
1658 		ret = B_TRUE;
1659 		goto out;
1660 	}
1661 
1662 	/*
1663 	 * more than 1 log buffer means zil_sync() hasn't yet freed
1664 	 * entries after a txg has committed
1665 	 */
1666 	if (list_next(&zilog->zl_lwb_list, lwb)) {
1667 		ret = B_FALSE;
1668 		goto out;
1669 	}
1670 
1671 	ASSERT(zil_empty(zilog));
1672 	ret = B_TRUE;
1673 out:
1674 	cv_broadcast(&zilog->zl_cv_writer);
1675 	mutex_exit(&zilog->zl_lock);
1676 	return (ret);
1677 }
1678 
1679 /* ARGSUSED */
1680 int
1681 zil_vdev_offline(char *osname, void *arg)
1682 {
1683 	objset_t *os;
1684 	zilog_t *zilog;
1685 	int error;
1686 
1687 	error = dmu_objset_hold(osname, FTAG, &os);
1688 	if (error)
1689 		return (error);
1690 
1691 	zilog = dmu_objset_zil(os);
1692 	if (zil_suspend(zilog) != 0)
1693 		error = EEXIST;
1694 	else
1695 		zil_resume(zilog);
1696 	dmu_objset_rele(os, FTAG);
1697 	return (error);
1698 }
1699