1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 /* 30 * This file describes the interface that the DMU provides for its 31 * consumers. 32 * 33 * The DMU also interacts with the SPA. That interface is described in 34 * dmu_spa.h. 35 */ 36 37 #include <sys/inttypes.h> 38 #include <sys/types.h> 39 #include <sys/param.h> 40 #include <sys/cred.h> 41 42 #ifdef __cplusplus 43 extern "C" { 44 #endif 45 46 struct uio; 47 struct page; 48 struct vnode; 49 struct spa; 50 struct zilog; 51 struct zio; 52 struct blkptr; 53 struct zap_cursor; 54 struct dsl_dataset; 55 struct dsl_pool; 56 struct dnode; 57 struct drr_begin; 58 struct drr_end; 59 struct zbookmark; 60 struct spa; 61 struct nvlist; 62 struct objset_impl; 63 64 typedef struct objset objset_t; 65 typedef struct dmu_tx dmu_tx_t; 66 typedef struct dsl_dir dsl_dir_t; 67 68 typedef enum dmu_object_type { 69 DMU_OT_NONE, 70 /* general: */ 71 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 72 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 73 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 74 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 75 DMU_OT_BPLIST, /* UINT64 */ 76 DMU_OT_BPLIST_HDR, /* UINT64 */ 77 /* spa: */ 78 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 79 DMU_OT_SPACE_MAP, /* UINT64 */ 80 /* zil: */ 81 DMU_OT_INTENT_LOG, /* UINT64 */ 82 /* dmu: */ 83 DMU_OT_DNODE, /* DNODE */ 84 DMU_OT_OBJSET, /* OBJSET */ 85 /* dsl: */ 86 DMU_OT_DSL_DIR, /* UINT64 */ 87 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 88 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 89 DMU_OT_DSL_PROPS, /* ZAP */ 90 DMU_OT_DSL_DATASET, /* UINT64 */ 91 /* zpl: */ 92 DMU_OT_ZNODE, /* ZNODE */ 93 DMU_OT_OLDACL, /* Old ACL */ 94 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 95 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 96 DMU_OT_MASTER_NODE, /* ZAP */ 97 DMU_OT_UNLINKED_SET, /* ZAP */ 98 /* zvol: */ 99 DMU_OT_ZVOL, /* UINT8 */ 100 DMU_OT_ZVOL_PROP, /* ZAP */ 101 /* other; for testing only! */ 102 DMU_OT_PLAIN_OTHER, /* UINT8 */ 103 DMU_OT_UINT64_OTHER, /* UINT64 */ 104 DMU_OT_ZAP_OTHER, /* ZAP */ 105 /* new object types: */ 106 DMU_OT_ERROR_LOG, /* ZAP */ 107 DMU_OT_SPA_HISTORY, /* UINT8 */ 108 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 109 DMU_OT_POOL_PROPS, /* ZAP */ 110 DMU_OT_DSL_PERMS, /* ZAP */ 111 DMU_OT_ACL, /* ACL */ 112 DMU_OT_SYSACL, /* SYSACL */ 113 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 114 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 115 DMU_OT_NEXT_CLONES, /* ZAP */ 116 DMU_OT_SCRUB_QUEUE, /* ZAP */ 117 DMU_OT_NUMTYPES 118 } dmu_object_type_t; 119 120 typedef enum dmu_objset_type { 121 DMU_OST_NONE, 122 DMU_OST_META, 123 DMU_OST_ZFS, 124 DMU_OST_ZVOL, 125 DMU_OST_OTHER, /* For testing only! */ 126 DMU_OST_ANY, /* Be careful! */ 127 DMU_OST_NUMTYPES 128 } dmu_objset_type_t; 129 130 void byteswap_uint64_array(void *buf, size_t size); 131 void byteswap_uint32_array(void *buf, size_t size); 132 void byteswap_uint16_array(void *buf, size_t size); 133 void byteswap_uint8_array(void *buf, size_t size); 134 void zap_byteswap(void *buf, size_t size); 135 void zfs_oldacl_byteswap(void *buf, size_t size); 136 void zfs_acl_byteswap(void *buf, size_t size); 137 void zfs_znode_byteswap(void *buf, size_t size); 138 139 #define DS_MODE_NOHOLD 0 /* internal use only */ 140 #define DS_MODE_USER 1 /* simple access, no special needs */ 141 #define DS_MODE_OWNER 2 /* the "main" access, e.g. a mount */ 142 #define DS_MODE_TYPE_MASK 0x3 143 #define DS_MODE_TYPE(x) ((x) & DS_MODE_TYPE_MASK) 144 #define DS_MODE_READONLY 0x8 145 #define DS_MODE_IS_READONLY(x) ((x) & DS_MODE_READONLY) 146 #define DS_MODE_INCONSISTENT 0x10 147 #define DS_MODE_IS_INCONSISTENT(x) ((x) & DS_MODE_INCONSISTENT) 148 149 #define DS_FIND_SNAPSHOTS (1<<0) 150 #define DS_FIND_CHILDREN (1<<1) 151 152 /* 153 * The maximum number of bytes that can be accessed as part of one 154 * operation, including metadata. 155 */ 156 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 157 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 158 159 /* 160 * Public routines to create, destroy, open, and close objsets. 161 */ 162 int dmu_objset_open(const char *name, dmu_objset_type_t type, int mode, 163 objset_t **osp); 164 int dmu_objset_open_ds(struct dsl_dataset *ds, dmu_objset_type_t type, 165 objset_t **osp); 166 void dmu_objset_close(objset_t *os); 167 int dmu_objset_evict_dbufs(objset_t *os); 168 int dmu_objset_create(const char *name, dmu_objset_type_t type, 169 objset_t *clone_parent, uint64_t flags, 170 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 171 int dmu_objset_destroy(const char *name); 172 int dmu_snapshots_destroy(char *fsname, char *snapname); 173 int dmu_objset_rollback(objset_t *os); 174 int dmu_objset_snapshot(char *fsname, char *snapname, struct nvlist *props, 175 boolean_t recursive); 176 int dmu_objset_rename(const char *name, const char *newname, 177 boolean_t recursive); 178 int dmu_objset_find(char *name, int func(char *, void *), void *arg, 179 int flags); 180 void dmu_objset_byteswap(void *buf, size_t size); 181 182 typedef struct dmu_buf { 183 uint64_t db_object; /* object that this buffer is part of */ 184 uint64_t db_offset; /* byte offset in this object */ 185 uint64_t db_size; /* size of buffer in bytes */ 186 void *db_data; /* data in buffer */ 187 } dmu_buf_t; 188 189 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 190 191 /* 192 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 193 */ 194 #define DMU_POOL_DIRECTORY_OBJECT 1 195 #define DMU_POOL_CONFIG "config" 196 #define DMU_POOL_ROOT_DATASET "root_dataset" 197 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 198 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 199 #define DMU_POOL_ERRLOG_LAST "errlog_last" 200 #define DMU_POOL_SPARES "spares" 201 #define DMU_POOL_DEFLATE "deflate" 202 #define DMU_POOL_HISTORY "history" 203 #define DMU_POOL_PROPS "pool_props" 204 #define DMU_POOL_L2CACHE "l2cache" 205 206 /* 4x8 zbookmark_t */ 207 #define DMU_POOL_SCRUB_BOOKMARK "scrub_bookmark" 208 /* 1x8 zap obj DMU_OT_SCRUB_QUEUE */ 209 #define DMU_POOL_SCRUB_QUEUE "scrub_queue" 210 /* 1x8 txg */ 211 #define DMU_POOL_SCRUB_MIN_TXG "scrub_min_txg" 212 /* 1x8 txg */ 213 #define DMU_POOL_SCRUB_MAX_TXG "scrub_max_txg" 214 /* 1x4 enum scrub_func */ 215 #define DMU_POOL_SCRUB_FUNC "scrub_func" 216 /* 1x8 count */ 217 #define DMU_POOL_SCRUB_ERRORS "scrub_errors" 218 219 /* 220 * Allocate an object from this objset. The range of object numbers 221 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 222 * 223 * The transaction must be assigned to a txg. The newly allocated 224 * object will be "held" in the transaction (ie. you can modify the 225 * newly allocated object in this transaction). 226 * 227 * dmu_object_alloc() chooses an object and returns it in *objectp. 228 * 229 * dmu_object_claim() allocates a specific object number. If that 230 * number is already allocated, it fails and returns EEXIST. 231 * 232 * Return 0 on success, or ENOSPC or EEXIST as specified above. 233 */ 234 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 235 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 236 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 237 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 238 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 239 int blocksize, dmu_object_type_t bonustype, int bonuslen); 240 241 /* 242 * Free an object from this objset. 243 * 244 * The object's data will be freed as well (ie. you don't need to call 245 * dmu_free(object, 0, -1, tx)). 246 * 247 * The object need not be held in the transaction. 248 * 249 * If there are any holds on this object's buffers (via dmu_buf_hold()), 250 * or tx holds on the object (via dmu_tx_hold_object()), you can not 251 * free it; it fails and returns EBUSY. 252 * 253 * If the object is not allocated, it fails and returns ENOENT. 254 * 255 * Return 0 on success, or EBUSY or ENOENT as specified above. 256 */ 257 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 258 259 /* 260 * Find the next allocated or free object. 261 * 262 * The objectp parameter is in-out. It will be updated to be the next 263 * object which is allocated. Ignore objects which have not been 264 * modified since txg. 265 * 266 * XXX Can only be called on a objset with no dirty data. 267 * 268 * Returns 0 on success, or ENOENT if there are no more objects. 269 */ 270 int dmu_object_next(objset_t *os, uint64_t *objectp, 271 boolean_t hole, uint64_t txg); 272 273 /* 274 * Set the data blocksize for an object. 275 * 276 * The object cannot have any blocks allcated beyond the first. If 277 * the first block is allocated already, the new size must be greater 278 * than the current block size. If these conditions are not met, 279 * ENOTSUP will be returned. 280 * 281 * Returns 0 on success, or EBUSY if there are any holds on the object 282 * contents, or ENOTSUP as described above. 283 */ 284 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 285 int ibs, dmu_tx_t *tx); 286 287 /* 288 * Set the checksum property on a dnode. The new checksum algorithm will 289 * apply to all newly written blocks; existing blocks will not be affected. 290 */ 291 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 292 dmu_tx_t *tx); 293 294 /* 295 * Set the compress property on a dnode. The new compression algorithm will 296 * apply to all newly written blocks; existing blocks will not be affected. 297 */ 298 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 299 dmu_tx_t *tx); 300 301 /* 302 * Decide how many copies of a given block we should make. Can be from 303 * 1 to SPA_DVAS_PER_BP. 304 */ 305 int dmu_get_replication_level(struct objset_impl *, struct zbookmark *zb, 306 dmu_object_type_t ot); 307 /* 308 * The bonus data is accessed more or less like a regular buffer. 309 * You must dmu_bonus_hold() to get the buffer, which will give you a 310 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 311 * data. As with any normal buffer, you must call dmu_buf_read() to 312 * read db_data, dmu_buf_will_dirty() before modifying it, and the 313 * object must be held in an assigned transaction before calling 314 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 315 * buffer as well. You must release your hold with dmu_buf_rele(). 316 */ 317 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 318 int dmu_bonus_max(void); 319 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 320 321 /* 322 * Obtain the DMU buffer from the specified object which contains the 323 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 324 * that it will remain in memory. You must release the hold with 325 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 326 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 327 * 328 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 329 * on the returned buffer before reading or writing the buffer's 330 * db_data. The comments for those routines describe what particular 331 * operations are valid after calling them. 332 * 333 * The object number must be a valid, allocated object number. 334 */ 335 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 336 void *tag, dmu_buf_t **); 337 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 338 void dmu_buf_rele(dmu_buf_t *db, void *tag); 339 uint64_t dmu_buf_refcount(dmu_buf_t *db); 340 341 /* 342 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 343 * range of an object. A pointer to an array of dmu_buf_t*'s is 344 * returned (in *dbpp). 345 * 346 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 347 * frees the array. The hold on the array of buffers MUST be released 348 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 349 * individually with dmu_buf_rele. 350 */ 351 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 352 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 353 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 354 355 /* 356 * Returns NULL on success, or the existing user ptr if it's already 357 * been set. 358 * 359 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 360 * 361 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 362 * will be set to db->db_data when you are allowed to access it. Note 363 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 364 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 365 * *user_data_ptr_ptr will be set to the new value when it changes. 366 * 367 * If non-NULL, pageout func will be called when this buffer is being 368 * excised from the cache, so that you can clean up the data structure 369 * pointed to by user_ptr. 370 * 371 * dmu_evict_user() will call the pageout func for all buffers in a 372 * objset with a given pageout func. 373 */ 374 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 375 dmu_buf_evict_func_t *pageout_func); 376 /* 377 * set_user_ie is the same as set_user, but request immediate eviction 378 * when hold count goes to zero. 379 */ 380 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 381 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 382 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 383 void *user_ptr, void *user_data_ptr_ptr, 384 dmu_buf_evict_func_t *pageout_func); 385 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 386 387 /* 388 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 389 */ 390 void *dmu_buf_get_user(dmu_buf_t *db); 391 392 /* 393 * Indicate that you are going to modify the buffer's data (db_data). 394 * 395 * The transaction (tx) must be assigned to a txg (ie. you've called 396 * dmu_tx_assign()). The buffer's object must be held in the tx 397 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 398 */ 399 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 400 401 /* 402 * You must create a transaction, then hold the objects which you will 403 * (or might) modify as part of this transaction. Then you must assign 404 * the transaction to a transaction group. Once the transaction has 405 * been assigned, you can modify buffers which belong to held objects as 406 * part of this transaction. You can't modify buffers before the 407 * transaction has been assigned; you can't modify buffers which don't 408 * belong to objects which this transaction holds; you can't hold 409 * objects once the transaction has been assigned. You may hold an 410 * object which you are going to free (with dmu_object_free()), but you 411 * don't have to. 412 * 413 * You can abort the transaction before it has been assigned. 414 * 415 * Note that you may hold buffers (with dmu_buf_hold) at any time, 416 * regardless of transaction state. 417 */ 418 419 #define DMU_NEW_OBJECT (-1ULL) 420 #define DMU_OBJECT_END (-1ULL) 421 422 dmu_tx_t *dmu_tx_create(objset_t *os); 423 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 424 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 425 uint64_t len); 426 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, char *name); 427 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 428 void dmu_tx_abort(dmu_tx_t *tx); 429 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 430 void dmu_tx_wait(dmu_tx_t *tx); 431 void dmu_tx_commit(dmu_tx_t *tx); 432 433 /* 434 * Free up the data blocks for a defined range of a file. If size is 435 * zero, the range from offset to end-of-file is freed. 436 */ 437 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 438 uint64_t size, dmu_tx_t *tx); 439 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 440 uint64_t size); 441 int dmu_free_object(objset_t *os, uint64_t object); 442 443 /* 444 * Convenience functions. 445 * 446 * Canfail routines will return 0 on success, or an errno if there is a 447 * nonrecoverable I/O error. 448 */ 449 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 450 void *buf); 451 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 452 const void *buf, dmu_tx_t *tx); 453 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 454 dmu_tx_t *tx); 455 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 456 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 457 dmu_tx_t *tx); 458 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 459 uint64_t size, struct page *pp, dmu_tx_t *tx); 460 461 extern int zfs_prefetch_disable; 462 463 /* 464 * Asynchronously try to read in the data. 465 */ 466 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 467 uint64_t len); 468 469 typedef struct dmu_object_info { 470 /* All sizes are in bytes. */ 471 uint32_t doi_data_block_size; 472 uint32_t doi_metadata_block_size; 473 uint64_t doi_bonus_size; 474 dmu_object_type_t doi_type; 475 dmu_object_type_t doi_bonus_type; 476 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 477 uint8_t doi_checksum; 478 uint8_t doi_compress; 479 uint8_t doi_pad[5]; 480 /* Values below are number of 512-byte blocks. */ 481 uint64_t doi_physical_blks; /* data + metadata */ 482 uint64_t doi_max_block_offset; 483 } dmu_object_info_t; 484 485 typedef void arc_byteswap_func_t(void *buf, size_t size); 486 487 typedef struct dmu_object_type_info { 488 arc_byteswap_func_t *ot_byteswap; 489 boolean_t ot_metadata; 490 char *ot_name; 491 } dmu_object_type_info_t; 492 493 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 494 495 /* 496 * Get information on a DMU object. 497 * 498 * Return 0 on success or ENOENT if object is not allocated. 499 * 500 * If doi is NULL, just indicates whether the object exists. 501 */ 502 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 503 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 504 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 505 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 506 u_longlong_t *nblk512); 507 508 typedef struct dmu_objset_stats { 509 uint64_t dds_num_clones; /* number of clones of this */ 510 uint64_t dds_creation_txg; 511 uint64_t dds_guid; 512 dmu_objset_type_t dds_type; 513 uint8_t dds_is_snapshot; 514 uint8_t dds_inconsistent; 515 char dds_origin[MAXNAMELEN]; 516 } dmu_objset_stats_t; 517 518 /* 519 * Get stats on a dataset. 520 */ 521 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 522 523 /* 524 * Add entries to the nvlist for all the objset's properties. See 525 * zfs_prop_table[] and zfs(1m) for details on the properties. 526 */ 527 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 528 529 /* 530 * Get the space usage statistics for statvfs(). 531 * 532 * refdbytes is the amount of space "referenced" by this objset. 533 * availbytes is the amount of space available to this objset, taking 534 * into account quotas & reservations, assuming that no other objsets 535 * use the space first. These values correspond to the 'referenced' and 536 * 'available' properties, described in the zfs(1m) manpage. 537 * 538 * usedobjs and availobjs are the number of objects currently allocated, 539 * and available. 540 */ 541 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 542 uint64_t *usedobjsp, uint64_t *availobjsp); 543 544 /* 545 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 546 * (Contrast with the ds_guid which is a 64-bit ID that will never 547 * change, so there is a small probability that it will collide.) 548 */ 549 uint64_t dmu_objset_fsid_guid(objset_t *os); 550 551 int dmu_objset_is_snapshot(objset_t *os); 552 553 extern struct spa *dmu_objset_spa(objset_t *os); 554 extern struct zilog *dmu_objset_zil(objset_t *os); 555 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 556 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 557 extern void dmu_objset_name(objset_t *os, char *buf); 558 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 559 extern uint64_t dmu_objset_id(objset_t *os); 560 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 561 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 562 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 563 int maxlen, boolean_t *conflict); 564 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 565 uint64_t *idp, uint64_t *offp); 566 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 567 extern void *dmu_objset_get_user(objset_t *os); 568 569 /* 570 * Return the txg number for the given assigned transaction. 571 */ 572 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 573 574 /* 575 * Synchronous write. 576 * If a parent zio is provided this function initiates a write on the 577 * provided buffer as a child of the parent zio. 578 * In the absence of a parent zio, the write is completed synchronously. 579 * At write completion, blk is filled with the bp of the written block. 580 * Note that while the data covered by this function will be on stable 581 * storage when the write completes this new data does not become a 582 * permanent part of the file until the associated transaction commits. 583 */ 584 typedef void dmu_sync_cb_t(dmu_buf_t *db, void *arg); 585 int dmu_sync(struct zio *zio, dmu_buf_t *db, 586 struct blkptr *bp, uint64_t txg, dmu_sync_cb_t *done, void *arg); 587 588 /* 589 * Find the next hole or data block in file starting at *off 590 * Return found offset in *off. Return ESRCH for end of file. 591 */ 592 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 593 uint64_t *off); 594 595 /* 596 * Initial setup and final teardown. 597 */ 598 extern void dmu_init(void); 599 extern void dmu_fini(void); 600 601 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 602 uint64_t object, uint64_t offset, int len); 603 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 604 dmu_traverse_cb_t cb, void *arg); 605 606 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin, 607 struct vnode *vp, offset_t *off); 608 609 typedef struct dmu_recv_cookie { 610 /* 611 * This structure is opaque! 612 * 613 * If logical and real are different, we are recving the stream 614 * into the "real" temporary clone, and then switching it with 615 * the "logical" target. 616 */ 617 struct dsl_dataset *drc_logical_ds; 618 struct dsl_dataset *drc_real_ds; 619 struct drr_begin *drc_drrb; 620 char *drc_tosnap; 621 boolean_t drc_newfs; 622 boolean_t drc_force; 623 } dmu_recv_cookie_t; 624 625 int dmu_recv_begin(char *tofs, char *tosnap, struct drr_begin *, 626 boolean_t force, objset_t *origin, boolean_t online, dmu_recv_cookie_t *); 627 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp); 628 int dmu_recv_end(dmu_recv_cookie_t *drc); 629 void dmu_recv_abort_cleanup(dmu_recv_cookie_t *drc); 630 631 /* CRC64 table */ 632 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 633 extern uint64_t zfs_crc64_table[256]; 634 635 #ifdef __cplusplus 636 } 637 #endif 638 639 #endif /* _SYS_DMU_H */ 640