1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 24 * Copyright (c) 2011, 2014 by Delphix. All rights reserved. 25 * Copyright 2011 Nexenta Systems, Inc. All rights reserved. 26 * Copyright (c) 2012, Joyent, Inc. All rights reserved. 27 * Copyright 2013 DEY Storage Systems, Inc. 28 * Copyright 2014 HybridCluster. All rights reserved. 29 */ 30 31 /* Portions Copyright 2010 Robert Milkowski */ 32 33 #ifndef _SYS_DMU_H 34 #define _SYS_DMU_H 35 36 /* 37 * This file describes the interface that the DMU provides for its 38 * consumers. 39 * 40 * The DMU also interacts with the SPA. That interface is described in 41 * dmu_spa.h. 42 */ 43 44 #include <sys/inttypes.h> 45 #include <sys/types.h> 46 #include <sys/param.h> 47 #include <sys/cred.h> 48 #include <sys/time.h> 49 #include <sys/fs/zfs.h> 50 51 #ifdef __cplusplus 52 extern "C" { 53 #endif 54 55 struct uio; 56 struct xuio; 57 struct page; 58 struct vnode; 59 struct spa; 60 struct zilog; 61 struct zio; 62 struct blkptr; 63 struct zap_cursor; 64 struct dsl_dataset; 65 struct dsl_pool; 66 struct dnode; 67 struct drr_begin; 68 struct drr_end; 69 struct zbookmark_phys; 70 struct spa; 71 struct nvlist; 72 struct arc_buf; 73 struct zio_prop; 74 struct sa_handle; 75 76 typedef struct objset objset_t; 77 typedef struct dmu_tx dmu_tx_t; 78 typedef struct dsl_dir dsl_dir_t; 79 80 typedef enum dmu_object_byteswap { 81 DMU_BSWAP_UINT8, 82 DMU_BSWAP_UINT16, 83 DMU_BSWAP_UINT32, 84 DMU_BSWAP_UINT64, 85 DMU_BSWAP_ZAP, 86 DMU_BSWAP_DNODE, 87 DMU_BSWAP_OBJSET, 88 DMU_BSWAP_ZNODE, 89 DMU_BSWAP_OLDACL, 90 DMU_BSWAP_ACL, 91 /* 92 * Allocating a new byteswap type number makes the on-disk format 93 * incompatible with any other format that uses the same number. 94 * 95 * Data can usually be structured to work with one of the 96 * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types. 97 */ 98 DMU_BSWAP_NUMFUNCS 99 } dmu_object_byteswap_t; 100 101 #define DMU_OT_NEWTYPE 0x80 102 #define DMU_OT_METADATA 0x40 103 #define DMU_OT_BYTESWAP_MASK 0x3f 104 105 /* 106 * Defines a uint8_t object type. Object types specify if the data 107 * in the object is metadata (boolean) and how to byteswap the data 108 * (dmu_object_byteswap_t). 109 */ 110 #define DMU_OT(byteswap, metadata) \ 111 (DMU_OT_NEWTYPE | \ 112 ((metadata) ? DMU_OT_METADATA : 0) | \ 113 ((byteswap) & DMU_OT_BYTESWAP_MASK)) 114 115 #define DMU_OT_IS_VALID(ot) (((ot) & DMU_OT_NEWTYPE) ? \ 116 ((ot) & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS : \ 117 (ot) < DMU_OT_NUMTYPES) 118 119 #define DMU_OT_IS_METADATA(ot) (((ot) & DMU_OT_NEWTYPE) ? \ 120 ((ot) & DMU_OT_METADATA) : \ 121 dmu_ot[(ot)].ot_metadata) 122 123 /* 124 * These object types use bp_fill != 1 for their L0 bp's. Therefore they can't 125 * have their data embedded (i.e. use a BP_IS_EMBEDDED() bp), because bp_fill 126 * is repurposed for embedded BPs. 127 */ 128 #define DMU_OT_HAS_FILL(ot) \ 129 ((ot) == DMU_OT_DNODE || (ot) == DMU_OT_OBJSET) 130 131 #define DMU_OT_BYTESWAP(ot) (((ot) & DMU_OT_NEWTYPE) ? \ 132 ((ot) & DMU_OT_BYTESWAP_MASK) : \ 133 dmu_ot[(ot)].ot_byteswap) 134 135 typedef enum dmu_object_type { 136 DMU_OT_NONE, 137 /* general: */ 138 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 139 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 140 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 141 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 142 DMU_OT_BPOBJ, /* UINT64 */ 143 DMU_OT_BPOBJ_HDR, /* UINT64 */ 144 /* spa: */ 145 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 146 DMU_OT_SPACE_MAP, /* UINT64 */ 147 /* zil: */ 148 DMU_OT_INTENT_LOG, /* UINT64 */ 149 /* dmu: */ 150 DMU_OT_DNODE, /* DNODE */ 151 DMU_OT_OBJSET, /* OBJSET */ 152 /* dsl: */ 153 DMU_OT_DSL_DIR, /* UINT64 */ 154 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 155 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 156 DMU_OT_DSL_PROPS, /* ZAP */ 157 DMU_OT_DSL_DATASET, /* UINT64 */ 158 /* zpl: */ 159 DMU_OT_ZNODE, /* ZNODE */ 160 DMU_OT_OLDACL, /* Old ACL */ 161 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 162 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 163 DMU_OT_MASTER_NODE, /* ZAP */ 164 DMU_OT_UNLINKED_SET, /* ZAP */ 165 /* zvol: */ 166 DMU_OT_ZVOL, /* UINT8 */ 167 DMU_OT_ZVOL_PROP, /* ZAP */ 168 /* other; for testing only! */ 169 DMU_OT_PLAIN_OTHER, /* UINT8 */ 170 DMU_OT_UINT64_OTHER, /* UINT64 */ 171 DMU_OT_ZAP_OTHER, /* ZAP */ 172 /* new object types: */ 173 DMU_OT_ERROR_LOG, /* ZAP */ 174 DMU_OT_SPA_HISTORY, /* UINT8 */ 175 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 176 DMU_OT_POOL_PROPS, /* ZAP */ 177 DMU_OT_DSL_PERMS, /* ZAP */ 178 DMU_OT_ACL, /* ACL */ 179 DMU_OT_SYSACL, /* SYSACL */ 180 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 181 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 182 DMU_OT_NEXT_CLONES, /* ZAP */ 183 DMU_OT_SCAN_QUEUE, /* ZAP */ 184 DMU_OT_USERGROUP_USED, /* ZAP */ 185 DMU_OT_USERGROUP_QUOTA, /* ZAP */ 186 DMU_OT_USERREFS, /* ZAP */ 187 DMU_OT_DDT_ZAP, /* ZAP */ 188 DMU_OT_DDT_STATS, /* ZAP */ 189 DMU_OT_SA, /* System attr */ 190 DMU_OT_SA_MASTER_NODE, /* ZAP */ 191 DMU_OT_SA_ATTR_REGISTRATION, /* ZAP */ 192 DMU_OT_SA_ATTR_LAYOUTS, /* ZAP */ 193 DMU_OT_SCAN_XLATE, /* ZAP */ 194 DMU_OT_DEDUP, /* fake dedup BP from ddt_bp_create() */ 195 DMU_OT_DEADLIST, /* ZAP */ 196 DMU_OT_DEADLIST_HDR, /* UINT64 */ 197 DMU_OT_DSL_CLONES, /* ZAP */ 198 DMU_OT_BPOBJ_SUBOBJ, /* UINT64 */ 199 /* 200 * Do not allocate new object types here. Doing so makes the on-disk 201 * format incompatible with any other format that uses the same object 202 * type number. 203 * 204 * When creating an object which does not have one of the above types 205 * use the DMU_OTN_* type with the correct byteswap and metadata 206 * values. 207 * 208 * The DMU_OTN_* types do not have entries in the dmu_ot table, 209 * use the DMU_OT_IS_METDATA() and DMU_OT_BYTESWAP() macros instead 210 * of indexing into dmu_ot directly (this works for both DMU_OT_* types 211 * and DMU_OTN_* types). 212 */ 213 DMU_OT_NUMTYPES, 214 215 /* 216 * Names for valid types declared with DMU_OT(). 217 */ 218 DMU_OTN_UINT8_DATA = DMU_OT(DMU_BSWAP_UINT8, B_FALSE), 219 DMU_OTN_UINT8_METADATA = DMU_OT(DMU_BSWAP_UINT8, B_TRUE), 220 DMU_OTN_UINT16_DATA = DMU_OT(DMU_BSWAP_UINT16, B_FALSE), 221 DMU_OTN_UINT16_METADATA = DMU_OT(DMU_BSWAP_UINT16, B_TRUE), 222 DMU_OTN_UINT32_DATA = DMU_OT(DMU_BSWAP_UINT32, B_FALSE), 223 DMU_OTN_UINT32_METADATA = DMU_OT(DMU_BSWAP_UINT32, B_TRUE), 224 DMU_OTN_UINT64_DATA = DMU_OT(DMU_BSWAP_UINT64, B_FALSE), 225 DMU_OTN_UINT64_METADATA = DMU_OT(DMU_BSWAP_UINT64, B_TRUE), 226 DMU_OTN_ZAP_DATA = DMU_OT(DMU_BSWAP_ZAP, B_FALSE), 227 DMU_OTN_ZAP_METADATA = DMU_OT(DMU_BSWAP_ZAP, B_TRUE), 228 } dmu_object_type_t; 229 230 typedef enum txg_how { 231 TXG_WAIT = 1, 232 TXG_NOWAIT, 233 TXG_WAITED, 234 } txg_how_t; 235 236 void byteswap_uint64_array(void *buf, size_t size); 237 void byteswap_uint32_array(void *buf, size_t size); 238 void byteswap_uint16_array(void *buf, size_t size); 239 void byteswap_uint8_array(void *buf, size_t size); 240 void zap_byteswap(void *buf, size_t size); 241 void zfs_oldacl_byteswap(void *buf, size_t size); 242 void zfs_acl_byteswap(void *buf, size_t size); 243 void zfs_znode_byteswap(void *buf, size_t size); 244 245 #define DS_FIND_SNAPSHOTS (1<<0) 246 #define DS_FIND_CHILDREN (1<<1) 247 248 /* 249 * The maximum number of bytes that can be accessed as part of one 250 * operation, including metadata. 251 */ 252 #define DMU_MAX_ACCESS (32 * 1024 * 1024) /* 32MB */ 253 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 254 255 #define DMU_USERUSED_OBJECT (-1ULL) 256 #define DMU_GROUPUSED_OBJECT (-2ULL) 257 258 /* 259 * artificial blkids for bonus buffer and spill blocks 260 */ 261 #define DMU_BONUS_BLKID (-1ULL) 262 #define DMU_SPILL_BLKID (-2ULL) 263 /* 264 * Public routines to create, destroy, open, and close objsets. 265 */ 266 int dmu_objset_hold(const char *name, void *tag, objset_t **osp); 267 int dmu_objset_own(const char *name, dmu_objset_type_t type, 268 boolean_t readonly, void *tag, objset_t **osp); 269 void dmu_objset_rele(objset_t *os, void *tag); 270 void dmu_objset_disown(objset_t *os, void *tag); 271 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp); 272 273 void dmu_objset_evict_dbufs(objset_t *os); 274 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags, 275 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 276 int dmu_objset_clone(const char *name, const char *origin); 277 int dsl_destroy_snapshots_nvl(struct nvlist *snaps, boolean_t defer, 278 struct nvlist *errlist); 279 int dmu_objset_snapshot_one(const char *fsname, const char *snapname); 280 int dmu_objset_snapshot_tmp(const char *, const char *, int); 281 int dmu_objset_find(char *name, int func(const char *, void *), void *arg, 282 int flags); 283 void dmu_objset_byteswap(void *buf, size_t size); 284 int dsl_dataset_rename_snapshot(const char *fsname, 285 const char *oldsnapname, const char *newsnapname, boolean_t recursive); 286 287 typedef struct dmu_buf { 288 uint64_t db_object; /* object that this buffer is part of */ 289 uint64_t db_offset; /* byte offset in this object */ 290 uint64_t db_size; /* size of buffer in bytes */ 291 void *db_data; /* data in buffer */ 292 } dmu_buf_t; 293 294 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 295 296 /* 297 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 298 */ 299 #define DMU_POOL_DIRECTORY_OBJECT 1 300 #define DMU_POOL_CONFIG "config" 301 #define DMU_POOL_FEATURES_FOR_WRITE "features_for_write" 302 #define DMU_POOL_FEATURES_FOR_READ "features_for_read" 303 #define DMU_POOL_FEATURE_DESCRIPTIONS "feature_descriptions" 304 #define DMU_POOL_FEATURE_ENABLED_TXG "feature_enabled_txg" 305 #define DMU_POOL_ROOT_DATASET "root_dataset" 306 #define DMU_POOL_SYNC_BPOBJ "sync_bplist" 307 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 308 #define DMU_POOL_ERRLOG_LAST "errlog_last" 309 #define DMU_POOL_SPARES "spares" 310 #define DMU_POOL_DEFLATE "deflate" 311 #define DMU_POOL_HISTORY "history" 312 #define DMU_POOL_PROPS "pool_props" 313 #define DMU_POOL_L2CACHE "l2cache" 314 #define DMU_POOL_TMP_USERREFS "tmp_userrefs" 315 #define DMU_POOL_DDT "DDT-%s-%s-%s" 316 #define DMU_POOL_DDT_STATS "DDT-statistics" 317 #define DMU_POOL_CREATION_VERSION "creation_version" 318 #define DMU_POOL_SCAN "scan" 319 #define DMU_POOL_FREE_BPOBJ "free_bpobj" 320 #define DMU_POOL_BPTREE_OBJ "bptree_obj" 321 #define DMU_POOL_EMPTY_BPOBJ "empty_bpobj" 322 323 /* 324 * Allocate an object from this objset. The range of object numbers 325 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 326 * 327 * The transaction must be assigned to a txg. The newly allocated 328 * object will be "held" in the transaction (ie. you can modify the 329 * newly allocated object in this transaction). 330 * 331 * dmu_object_alloc() chooses an object and returns it in *objectp. 332 * 333 * dmu_object_claim() allocates a specific object number. If that 334 * number is already allocated, it fails and returns EEXIST. 335 * 336 * Return 0 on success, or ENOSPC or EEXIST as specified above. 337 */ 338 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 339 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 340 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 341 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 342 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 343 int blocksize, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *txp); 344 345 /* 346 * Free an object from this objset. 347 * 348 * The object's data will be freed as well (ie. you don't need to call 349 * dmu_free(object, 0, -1, tx)). 350 * 351 * The object need not be held in the transaction. 352 * 353 * If there are any holds on this object's buffers (via dmu_buf_hold()), 354 * or tx holds on the object (via dmu_tx_hold_object()), you can not 355 * free it; it fails and returns EBUSY. 356 * 357 * If the object is not allocated, it fails and returns ENOENT. 358 * 359 * Return 0 on success, or EBUSY or ENOENT as specified above. 360 */ 361 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 362 363 /* 364 * Find the next allocated or free object. 365 * 366 * The objectp parameter is in-out. It will be updated to be the next 367 * object which is allocated. Ignore objects which have not been 368 * modified since txg. 369 * 370 * XXX Can only be called on a objset with no dirty data. 371 * 372 * Returns 0 on success, or ENOENT if there are no more objects. 373 */ 374 int dmu_object_next(objset_t *os, uint64_t *objectp, 375 boolean_t hole, uint64_t txg); 376 377 /* 378 * Set the data blocksize for an object. 379 * 380 * The object cannot have any blocks allcated beyond the first. If 381 * the first block is allocated already, the new size must be greater 382 * than the current block size. If these conditions are not met, 383 * ENOTSUP will be returned. 384 * 385 * Returns 0 on success, or EBUSY if there are any holds on the object 386 * contents, or ENOTSUP as described above. 387 */ 388 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 389 int ibs, dmu_tx_t *tx); 390 391 /* 392 * Set the checksum property on a dnode. The new checksum algorithm will 393 * apply to all newly written blocks; existing blocks will not be affected. 394 */ 395 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 396 dmu_tx_t *tx); 397 398 /* 399 * Set the compress property on a dnode. The new compression algorithm will 400 * apply to all newly written blocks; existing blocks will not be affected. 401 */ 402 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 403 dmu_tx_t *tx); 404 405 void 406 dmu_write_embedded(objset_t *os, uint64_t object, uint64_t offset, 407 void *data, uint8_t etype, uint8_t comp, int uncompressed_size, 408 int compressed_size, int byteorder, dmu_tx_t *tx); 409 410 /* 411 * Decide how to write a block: checksum, compression, number of copies, etc. 412 */ 413 #define WP_NOFILL 0x1 414 #define WP_DMU_SYNC 0x2 415 #define WP_SPILL 0x4 416 417 void dmu_write_policy(objset_t *os, struct dnode *dn, int level, int wp, 418 struct zio_prop *zp); 419 /* 420 * The bonus data is accessed more or less like a regular buffer. 421 * You must dmu_bonus_hold() to get the buffer, which will give you a 422 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 423 * data. As with any normal buffer, you must call dmu_buf_read() to 424 * read db_data, dmu_buf_will_dirty() before modifying it, and the 425 * object must be held in an assigned transaction before calling 426 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 427 * buffer as well. You must release your hold with dmu_buf_rele(). 428 * 429 * Returns ENOENT, EIO, or 0. 430 */ 431 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 432 int dmu_bonus_max(void); 433 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 434 int dmu_set_bonustype(dmu_buf_t *, dmu_object_type_t, dmu_tx_t *); 435 dmu_object_type_t dmu_get_bonustype(dmu_buf_t *); 436 int dmu_rm_spill(objset_t *, uint64_t, dmu_tx_t *); 437 438 /* 439 * Special spill buffer support used by "SA" framework 440 */ 441 442 int dmu_spill_hold_by_bonus(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp); 443 int dmu_spill_hold_by_dnode(struct dnode *dn, uint32_t flags, 444 void *tag, dmu_buf_t **dbp); 445 int dmu_spill_hold_existing(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp); 446 447 /* 448 * Obtain the DMU buffer from the specified object which contains the 449 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 450 * that it will remain in memory. You must release the hold with 451 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 452 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 453 * 454 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 455 * on the returned buffer before reading or writing the buffer's 456 * db_data. The comments for those routines describe what particular 457 * operations are valid after calling them. 458 * 459 * The object number must be a valid, allocated object number. 460 */ 461 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 462 void *tag, dmu_buf_t **, int flags); 463 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 464 void dmu_buf_rele(dmu_buf_t *db, void *tag); 465 uint64_t dmu_buf_refcount(dmu_buf_t *db); 466 467 /* 468 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 469 * range of an object. A pointer to an array of dmu_buf_t*'s is 470 * returned (in *dbpp). 471 * 472 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 473 * frees the array. The hold on the array of buffers MUST be released 474 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 475 * individually with dmu_buf_rele. 476 */ 477 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 478 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 479 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 480 481 /* 482 * Returns NULL on success, or the existing user ptr if it's already 483 * been set. 484 * 485 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 486 * 487 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 488 * will be set to db->db_data when you are allowed to access it. Note 489 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 490 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 491 * *user_data_ptr_ptr will be set to the new value when it changes. 492 * 493 * If non-NULL, pageout func will be called when this buffer is being 494 * excised from the cache, so that you can clean up the data structure 495 * pointed to by user_ptr. 496 * 497 * dmu_evict_user() will call the pageout func for all buffers in a 498 * objset with a given pageout func. 499 */ 500 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 501 dmu_buf_evict_func_t *pageout_func); 502 /* 503 * set_user_ie is the same as set_user, but request immediate eviction 504 * when hold count goes to zero. 505 */ 506 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 507 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 508 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 509 void *user_ptr, void *user_data_ptr_ptr, 510 dmu_buf_evict_func_t *pageout_func); 511 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 512 513 /* 514 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 515 */ 516 void *dmu_buf_get_user(dmu_buf_t *db); 517 518 /* 519 * Returns the blkptr associated with this dbuf, or NULL if not set. 520 */ 521 struct blkptr *dmu_buf_get_blkptr(dmu_buf_t *db); 522 523 /* 524 * Indicate that you are going to modify the buffer's data (db_data). 525 * 526 * The transaction (tx) must be assigned to a txg (ie. you've called 527 * dmu_tx_assign()). The buffer's object must be held in the tx 528 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 529 */ 530 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 531 532 /* 533 * Tells if the given dbuf is freeable. 534 */ 535 boolean_t dmu_buf_freeable(dmu_buf_t *); 536 537 /* 538 * You must create a transaction, then hold the objects which you will 539 * (or might) modify as part of this transaction. Then you must assign 540 * the transaction to a transaction group. Once the transaction has 541 * been assigned, you can modify buffers which belong to held objects as 542 * part of this transaction. You can't modify buffers before the 543 * transaction has been assigned; you can't modify buffers which don't 544 * belong to objects which this transaction holds; you can't hold 545 * objects once the transaction has been assigned. You may hold an 546 * object which you are going to free (with dmu_object_free()), but you 547 * don't have to. 548 * 549 * You can abort the transaction before it has been assigned. 550 * 551 * Note that you may hold buffers (with dmu_buf_hold) at any time, 552 * regardless of transaction state. 553 */ 554 555 #define DMU_NEW_OBJECT (-1ULL) 556 #define DMU_OBJECT_END (-1ULL) 557 558 dmu_tx_t *dmu_tx_create(objset_t *os); 559 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 560 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 561 uint64_t len); 562 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name); 563 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 564 void dmu_tx_hold_spill(dmu_tx_t *tx, uint64_t object); 565 void dmu_tx_hold_sa(dmu_tx_t *tx, struct sa_handle *hdl, boolean_t may_grow); 566 void dmu_tx_hold_sa_create(dmu_tx_t *tx, int total_size); 567 void dmu_tx_abort(dmu_tx_t *tx); 568 int dmu_tx_assign(dmu_tx_t *tx, enum txg_how txg_how); 569 void dmu_tx_wait(dmu_tx_t *tx); 570 void dmu_tx_commit(dmu_tx_t *tx); 571 void dmu_tx_mark_netfree(dmu_tx_t *tx); 572 573 /* 574 * To register a commit callback, dmu_tx_callback_register() must be called. 575 * 576 * dcb_data is a pointer to caller private data that is passed on as a 577 * callback parameter. The caller is responsible for properly allocating and 578 * freeing it. 579 * 580 * When registering a callback, the transaction must be already created, but 581 * it cannot be committed or aborted. It can be assigned to a txg or not. 582 * 583 * The callback will be called after the transaction has been safely written 584 * to stable storage and will also be called if the dmu_tx is aborted. 585 * If there is any error which prevents the transaction from being committed to 586 * disk, the callback will be called with a value of error != 0. 587 */ 588 typedef void dmu_tx_callback_func_t(void *dcb_data, int error); 589 590 void dmu_tx_callback_register(dmu_tx_t *tx, dmu_tx_callback_func_t *dcb_func, 591 void *dcb_data); 592 593 /* 594 * Free up the data blocks for a defined range of a file. If size is 595 * -1, the range from offset to end-of-file is freed. 596 */ 597 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 598 uint64_t size, dmu_tx_t *tx); 599 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 600 uint64_t size); 601 int dmu_free_long_object(objset_t *os, uint64_t object); 602 603 /* 604 * Convenience functions. 605 * 606 * Canfail routines will return 0 on success, or an errno if there is a 607 * nonrecoverable I/O error. 608 */ 609 #define DMU_READ_PREFETCH 0 /* prefetch */ 610 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */ 611 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 612 void *buf, uint32_t flags); 613 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 614 const void *buf, dmu_tx_t *tx); 615 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 616 dmu_tx_t *tx); 617 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 618 int dmu_read_uio_dbuf(dmu_buf_t *zdb, struct uio *uio, uint64_t size); 619 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 620 dmu_tx_t *tx); 621 int dmu_write_uio_dbuf(dmu_buf_t *zdb, struct uio *uio, uint64_t size, 622 dmu_tx_t *tx); 623 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 624 uint64_t size, struct page *pp, dmu_tx_t *tx); 625 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size); 626 void dmu_return_arcbuf(struct arc_buf *buf); 627 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf, 628 dmu_tx_t *tx); 629 int dmu_xuio_init(struct xuio *uio, int niov); 630 void dmu_xuio_fini(struct xuio *uio); 631 int dmu_xuio_add(struct xuio *uio, struct arc_buf *abuf, offset_t off, 632 size_t n); 633 int dmu_xuio_cnt(struct xuio *uio); 634 struct arc_buf *dmu_xuio_arcbuf(struct xuio *uio, int i); 635 void dmu_xuio_clear(struct xuio *uio, int i); 636 void xuio_stat_wbuf_copied(); 637 void xuio_stat_wbuf_nocopy(); 638 639 extern int zfs_prefetch_disable; 640 extern int zfs_max_recordsize; 641 642 /* 643 * Asynchronously try to read in the data. 644 */ 645 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 646 uint64_t len); 647 648 typedef struct dmu_object_info { 649 /* All sizes are in bytes unless otherwise indicated. */ 650 uint32_t doi_data_block_size; 651 uint32_t doi_metadata_block_size; 652 dmu_object_type_t doi_type; 653 dmu_object_type_t doi_bonus_type; 654 uint64_t doi_bonus_size; 655 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 656 uint8_t doi_checksum; 657 uint8_t doi_compress; 658 uint8_t doi_nblkptr; 659 uint8_t doi_pad[4]; 660 uint64_t doi_physical_blocks_512; /* data + metadata, 512b blks */ 661 uint64_t doi_max_offset; 662 uint64_t doi_fill_count; /* number of non-empty blocks */ 663 } dmu_object_info_t; 664 665 typedef void arc_byteswap_func_t(void *buf, size_t size); 666 667 typedef struct dmu_object_type_info { 668 dmu_object_byteswap_t ot_byteswap; 669 boolean_t ot_metadata; 670 char *ot_name; 671 } dmu_object_type_info_t; 672 673 typedef struct dmu_object_byteswap_info { 674 arc_byteswap_func_t *ob_func; 675 char *ob_name; 676 } dmu_object_byteswap_info_t; 677 678 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 679 extern const dmu_object_byteswap_info_t dmu_ot_byteswap[DMU_BSWAP_NUMFUNCS]; 680 681 /* 682 * Get information on a DMU object. 683 * 684 * Return 0 on success or ENOENT if object is not allocated. 685 * 686 * If doi is NULL, just indicates whether the object exists. 687 */ 688 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 689 /* Like dmu_object_info, but faster if you have a held dnode in hand. */ 690 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 691 /* Like dmu_object_info, but faster if you have a held dbuf in hand. */ 692 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 693 /* 694 * Like dmu_object_info_from_db, but faster still when you only care about 695 * the size. This is specifically optimized for zfs_getattr(). 696 */ 697 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 698 u_longlong_t *nblk512); 699 700 typedef struct dmu_objset_stats { 701 uint64_t dds_num_clones; /* number of clones of this */ 702 uint64_t dds_creation_txg; 703 uint64_t dds_guid; 704 dmu_objset_type_t dds_type; 705 uint8_t dds_is_snapshot; 706 uint8_t dds_inconsistent; 707 char dds_origin[MAXNAMELEN]; 708 } dmu_objset_stats_t; 709 710 /* 711 * Get stats on a dataset. 712 */ 713 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 714 715 /* 716 * Add entries to the nvlist for all the objset's properties. See 717 * zfs_prop_table[] and zfs(1m) for details on the properties. 718 */ 719 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 720 721 /* 722 * Get the space usage statistics for statvfs(). 723 * 724 * refdbytes is the amount of space "referenced" by this objset. 725 * availbytes is the amount of space available to this objset, taking 726 * into account quotas & reservations, assuming that no other objsets 727 * use the space first. These values correspond to the 'referenced' and 728 * 'available' properties, described in the zfs(1m) manpage. 729 * 730 * usedobjs and availobjs are the number of objects currently allocated, 731 * and available. 732 */ 733 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 734 uint64_t *usedobjsp, uint64_t *availobjsp); 735 736 /* 737 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 738 * (Contrast with the ds_guid which is a 64-bit ID that will never 739 * change, so there is a small probability that it will collide.) 740 */ 741 uint64_t dmu_objset_fsid_guid(objset_t *os); 742 743 /* 744 * Get the [cm]time for an objset's snapshot dir 745 */ 746 timestruc_t dmu_objset_snap_cmtime(objset_t *os); 747 748 int dmu_objset_is_snapshot(objset_t *os); 749 750 extern struct spa *dmu_objset_spa(objset_t *os); 751 extern struct zilog *dmu_objset_zil(objset_t *os); 752 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 753 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 754 extern void dmu_objset_name(objset_t *os, char *buf); 755 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 756 extern uint64_t dmu_objset_id(objset_t *os); 757 extern zfs_sync_type_t dmu_objset_syncprop(objset_t *os); 758 extern zfs_logbias_op_t dmu_objset_logbias(objset_t *os); 759 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 760 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 761 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 762 int maxlen, boolean_t *conflict); 763 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 764 uint64_t *idp, uint64_t *offp); 765 766 typedef int objset_used_cb_t(dmu_object_type_t bonustype, 767 void *bonus, uint64_t *userp, uint64_t *groupp); 768 extern void dmu_objset_register_type(dmu_objset_type_t ost, 769 objset_used_cb_t *cb); 770 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 771 extern void *dmu_objset_get_user(objset_t *os); 772 773 /* 774 * Return the txg number for the given assigned transaction. 775 */ 776 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 777 778 /* 779 * Synchronous write. 780 * If a parent zio is provided this function initiates a write on the 781 * provided buffer as a child of the parent zio. 782 * In the absence of a parent zio, the write is completed synchronously. 783 * At write completion, blk is filled with the bp of the written block. 784 * Note that while the data covered by this function will be on stable 785 * storage when the write completes this new data does not become a 786 * permanent part of the file until the associated transaction commits. 787 */ 788 789 /* 790 * {zfs,zvol,ztest}_get_done() args 791 */ 792 typedef struct zgd { 793 struct zilog *zgd_zilog; 794 struct blkptr *zgd_bp; 795 dmu_buf_t *zgd_db; 796 struct rl *zgd_rl; 797 void *zgd_private; 798 } zgd_t; 799 800 typedef void dmu_sync_cb_t(zgd_t *arg, int error); 801 int dmu_sync(struct zio *zio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd); 802 803 /* 804 * Find the next hole or data block in file starting at *off 805 * Return found offset in *off. Return ESRCH for end of file. 806 */ 807 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 808 uint64_t *off); 809 810 /* 811 * Initial setup and final teardown. 812 */ 813 extern void dmu_init(void); 814 extern void dmu_fini(void); 815 816 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 817 uint64_t object, uint64_t offset, int len); 818 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 819 dmu_traverse_cb_t cb, void *arg); 820 821 int dmu_diff(const char *tosnap_name, const char *fromsnap_name, 822 struct vnode *vp, offset_t *offp); 823 824 /* CRC64 table */ 825 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 826 extern uint64_t zfs_crc64_table[256]; 827 828 extern int zfs_mdcomp_disable; 829 830 #ifdef __cplusplus 831 } 832 #endif 833 834 #endif /* _SYS_DMU_H */ 835