1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 /* 30 * This file describes the interface that the DMU provides for its 31 * consumers. 32 * 33 * The DMU also interacts with the SPA. That interface is described in 34 * dmu_spa.h. 35 */ 36 37 #include <sys/inttypes.h> 38 #include <sys/types.h> 39 #include <sys/param.h> 40 #include <sys/cred.h> 41 #include <sys/time.h> 42 43 #ifdef __cplusplus 44 extern "C" { 45 #endif 46 47 struct uio; 48 struct page; 49 struct vnode; 50 struct spa; 51 struct zilog; 52 struct zio; 53 struct blkptr; 54 struct zap_cursor; 55 struct dsl_dataset; 56 struct dsl_pool; 57 struct dnode; 58 struct drr_begin; 59 struct drr_end; 60 struct zbookmark; 61 struct spa; 62 struct nvlist; 63 struct arc_buf; 64 65 typedef struct objset objset_t; 66 typedef struct dmu_tx dmu_tx_t; 67 typedef struct dsl_dir dsl_dir_t; 68 69 typedef enum dmu_object_type { 70 DMU_OT_NONE, 71 /* general: */ 72 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 73 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 74 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 75 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 76 DMU_OT_BPLIST, /* UINT64 */ 77 DMU_OT_BPLIST_HDR, /* UINT64 */ 78 /* spa: */ 79 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 80 DMU_OT_SPACE_MAP, /* UINT64 */ 81 /* zil: */ 82 DMU_OT_INTENT_LOG, /* UINT64 */ 83 /* dmu: */ 84 DMU_OT_DNODE, /* DNODE */ 85 DMU_OT_OBJSET, /* OBJSET */ 86 /* dsl: */ 87 DMU_OT_DSL_DIR, /* UINT64 */ 88 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 89 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 90 DMU_OT_DSL_PROPS, /* ZAP */ 91 DMU_OT_DSL_DATASET, /* UINT64 */ 92 /* zpl: */ 93 DMU_OT_ZNODE, /* ZNODE */ 94 DMU_OT_OLDACL, /* Old ACL */ 95 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 96 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 97 DMU_OT_MASTER_NODE, /* ZAP */ 98 DMU_OT_UNLINKED_SET, /* ZAP */ 99 /* zvol: */ 100 DMU_OT_ZVOL, /* UINT8 */ 101 DMU_OT_ZVOL_PROP, /* ZAP */ 102 /* other; for testing only! */ 103 DMU_OT_PLAIN_OTHER, /* UINT8 */ 104 DMU_OT_UINT64_OTHER, /* UINT64 */ 105 DMU_OT_ZAP_OTHER, /* ZAP */ 106 /* new object types: */ 107 DMU_OT_ERROR_LOG, /* ZAP */ 108 DMU_OT_SPA_HISTORY, /* UINT8 */ 109 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 110 DMU_OT_POOL_PROPS, /* ZAP */ 111 DMU_OT_DSL_PERMS, /* ZAP */ 112 DMU_OT_ACL, /* ACL */ 113 DMU_OT_SYSACL, /* SYSACL */ 114 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 115 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 116 DMU_OT_NEXT_CLONES, /* ZAP */ 117 DMU_OT_SCRUB_QUEUE, /* ZAP */ 118 DMU_OT_USERGROUP_USED, /* ZAP */ 119 DMU_OT_USERGROUP_QUOTA, /* ZAP */ 120 DMU_OT_USERREFS, /* ZAP */ 121 DMU_OT_NUMTYPES 122 } dmu_object_type_t; 123 124 typedef enum dmu_objset_type { 125 DMU_OST_NONE, 126 DMU_OST_META, 127 DMU_OST_ZFS, 128 DMU_OST_ZVOL, 129 DMU_OST_OTHER, /* For testing only! */ 130 DMU_OST_ANY, /* Be careful! */ 131 DMU_OST_NUMTYPES 132 } dmu_objset_type_t; 133 134 void byteswap_uint64_array(void *buf, size_t size); 135 void byteswap_uint32_array(void *buf, size_t size); 136 void byteswap_uint16_array(void *buf, size_t size); 137 void byteswap_uint8_array(void *buf, size_t size); 138 void zap_byteswap(void *buf, size_t size); 139 void zfs_oldacl_byteswap(void *buf, size_t size); 140 void zfs_acl_byteswap(void *buf, size_t size); 141 void zfs_znode_byteswap(void *buf, size_t size); 142 143 #define DS_FIND_SNAPSHOTS (1<<0) 144 #define DS_FIND_CHILDREN (1<<1) 145 146 /* 147 * The maximum number of bytes that can be accessed as part of one 148 * operation, including metadata. 149 */ 150 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 151 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 152 153 #define DMU_USERUSED_OBJECT (-1ULL) 154 #define DMU_GROUPUSED_OBJECT (-2ULL) 155 156 /* 157 * Public routines to create, destroy, open, and close objsets. 158 */ 159 int dmu_objset_hold(const char *name, void *tag, objset_t **osp); 160 int dmu_objset_own(const char *name, dmu_objset_type_t type, 161 boolean_t readonly, void *tag, objset_t **osp); 162 void dmu_objset_rele(objset_t *os, void *tag); 163 void dmu_objset_disown(objset_t *os, void *tag); 164 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp); 165 166 int dmu_objset_evict_dbufs(objset_t *os); 167 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags, 168 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 169 int dmu_objset_clone(const char *name, struct dsl_dataset *clone_origin, 170 uint64_t flags); 171 int dmu_objset_destroy(const char *name, boolean_t defer); 172 int dmu_snapshots_destroy(char *fsname, char *snapname, boolean_t defer); 173 int dmu_objset_snapshot(char *fsname, char *snapname, struct nvlist *props, 174 boolean_t recursive); 175 int dmu_objset_rename(const char *name, const char *newname, 176 boolean_t recursive); 177 int dmu_objset_find(char *name, int func(char *, void *), void *arg, 178 int flags); 179 void dmu_objset_byteswap(void *buf, size_t size); 180 181 typedef struct dmu_buf { 182 uint64_t db_object; /* object that this buffer is part of */ 183 uint64_t db_offset; /* byte offset in this object */ 184 uint64_t db_size; /* size of buffer in bytes */ 185 void *db_data; /* data in buffer */ 186 } dmu_buf_t; 187 188 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 189 190 /* 191 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 192 */ 193 #define DMU_POOL_DIRECTORY_OBJECT 1 194 #define DMU_POOL_CONFIG "config" 195 #define DMU_POOL_ROOT_DATASET "root_dataset" 196 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 197 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 198 #define DMU_POOL_ERRLOG_LAST "errlog_last" 199 #define DMU_POOL_SPARES "spares" 200 #define DMU_POOL_DEFLATE "deflate" 201 #define DMU_POOL_HISTORY "history" 202 #define DMU_POOL_PROPS "pool_props" 203 #define DMU_POOL_L2CACHE "l2cache" 204 #define DMU_POOL_TMP_USERREFS "tmp_userrefs" 205 206 /* 4x8 zbookmark_t */ 207 #define DMU_POOL_SCRUB_BOOKMARK "scrub_bookmark" 208 /* 1x8 zap obj DMU_OT_SCRUB_QUEUE */ 209 #define DMU_POOL_SCRUB_QUEUE "scrub_queue" 210 /* 1x8 txg */ 211 #define DMU_POOL_SCRUB_MIN_TXG "scrub_min_txg" 212 /* 1x8 txg */ 213 #define DMU_POOL_SCRUB_MAX_TXG "scrub_max_txg" 214 /* 1x4 enum scrub_func */ 215 #define DMU_POOL_SCRUB_FUNC "scrub_func" 216 /* 1x8 count */ 217 #define DMU_POOL_SCRUB_ERRORS "scrub_errors" 218 219 /* 220 * Allocate an object from this objset. The range of object numbers 221 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 222 * 223 * The transaction must be assigned to a txg. The newly allocated 224 * object will be "held" in the transaction (ie. you can modify the 225 * newly allocated object in this transaction). 226 * 227 * dmu_object_alloc() chooses an object and returns it in *objectp. 228 * 229 * dmu_object_claim() allocates a specific object number. If that 230 * number is already allocated, it fails and returns EEXIST. 231 * 232 * Return 0 on success, or ENOSPC or EEXIST as specified above. 233 */ 234 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 235 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 236 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 237 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 238 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 239 int blocksize, dmu_object_type_t bonustype, int bonuslen); 240 241 /* 242 * Free an object from this objset. 243 * 244 * The object's data will be freed as well (ie. you don't need to call 245 * dmu_free(object, 0, -1, tx)). 246 * 247 * The object need not be held in the transaction. 248 * 249 * If there are any holds on this object's buffers (via dmu_buf_hold()), 250 * or tx holds on the object (via dmu_tx_hold_object()), you can not 251 * free it; it fails and returns EBUSY. 252 * 253 * If the object is not allocated, it fails and returns ENOENT. 254 * 255 * Return 0 on success, or EBUSY or ENOENT as specified above. 256 */ 257 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 258 259 /* 260 * Find the next allocated or free object. 261 * 262 * The objectp parameter is in-out. It will be updated to be the next 263 * object which is allocated. Ignore objects which have not been 264 * modified since txg. 265 * 266 * XXX Can only be called on a objset with no dirty data. 267 * 268 * Returns 0 on success, or ENOENT if there are no more objects. 269 */ 270 int dmu_object_next(objset_t *os, uint64_t *objectp, 271 boolean_t hole, uint64_t txg); 272 273 /* 274 * Set the data blocksize for an object. 275 * 276 * The object cannot have any blocks allcated beyond the first. If 277 * the first block is allocated already, the new size must be greater 278 * than the current block size. If these conditions are not met, 279 * ENOTSUP will be returned. 280 * 281 * Returns 0 on success, or EBUSY if there are any holds on the object 282 * contents, or ENOTSUP as described above. 283 */ 284 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 285 int ibs, dmu_tx_t *tx); 286 287 /* 288 * Set the checksum property on a dnode. The new checksum algorithm will 289 * apply to all newly written blocks; existing blocks will not be affected. 290 */ 291 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 292 dmu_tx_t *tx); 293 294 /* 295 * Set the compress property on a dnode. The new compression algorithm will 296 * apply to all newly written blocks; existing blocks will not be affected. 297 */ 298 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 299 dmu_tx_t *tx); 300 301 /* 302 * Decide how many copies of a given block we should make. Can be from 303 * 1 to SPA_DVAS_PER_BP. 304 */ 305 int dmu_get_replication_level(objset_t *os, struct zbookmark *zb, 306 dmu_object_type_t ot); 307 /* 308 * The bonus data is accessed more or less like a regular buffer. 309 * You must dmu_bonus_hold() to get the buffer, which will give you a 310 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 311 * data. As with any normal buffer, you must call dmu_buf_read() to 312 * read db_data, dmu_buf_will_dirty() before modifying it, and the 313 * object must be held in an assigned transaction before calling 314 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 315 * buffer as well. You must release your hold with dmu_buf_rele(). 316 */ 317 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 318 int dmu_bonus_max(void); 319 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 320 321 /* 322 * Obtain the DMU buffer from the specified object which contains the 323 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 324 * that it will remain in memory. You must release the hold with 325 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 326 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 327 * 328 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 329 * on the returned buffer before reading or writing the buffer's 330 * db_data. The comments for those routines describe what particular 331 * operations are valid after calling them. 332 * 333 * The object number must be a valid, allocated object number. 334 */ 335 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 336 void *tag, dmu_buf_t **); 337 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 338 void dmu_buf_rele(dmu_buf_t *db, void *tag); 339 uint64_t dmu_buf_refcount(dmu_buf_t *db); 340 341 /* 342 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 343 * range of an object. A pointer to an array of dmu_buf_t*'s is 344 * returned (in *dbpp). 345 * 346 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 347 * frees the array. The hold on the array of buffers MUST be released 348 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 349 * individually with dmu_buf_rele. 350 */ 351 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 352 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 353 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 354 355 /* 356 * Returns NULL on success, or the existing user ptr if it's already 357 * been set. 358 * 359 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 360 * 361 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 362 * will be set to db->db_data when you are allowed to access it. Note 363 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 364 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 365 * *user_data_ptr_ptr will be set to the new value when it changes. 366 * 367 * If non-NULL, pageout func will be called when this buffer is being 368 * excised from the cache, so that you can clean up the data structure 369 * pointed to by user_ptr. 370 * 371 * dmu_evict_user() will call the pageout func for all buffers in a 372 * objset with a given pageout func. 373 */ 374 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 375 dmu_buf_evict_func_t *pageout_func); 376 /* 377 * set_user_ie is the same as set_user, but request immediate eviction 378 * when hold count goes to zero. 379 */ 380 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 381 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 382 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 383 void *user_ptr, void *user_data_ptr_ptr, 384 dmu_buf_evict_func_t *pageout_func); 385 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 386 387 /* 388 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 389 */ 390 void *dmu_buf_get_user(dmu_buf_t *db); 391 392 /* 393 * Indicate that you are going to modify the buffer's data (db_data). 394 * 395 * The transaction (tx) must be assigned to a txg (ie. you've called 396 * dmu_tx_assign()). The buffer's object must be held in the tx 397 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 398 */ 399 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 400 401 /* 402 * Tells if the given dbuf is freeable. 403 */ 404 boolean_t dmu_buf_freeable(dmu_buf_t *); 405 406 /* 407 * You must create a transaction, then hold the objects which you will 408 * (or might) modify as part of this transaction. Then you must assign 409 * the transaction to a transaction group. Once the transaction has 410 * been assigned, you can modify buffers which belong to held objects as 411 * part of this transaction. You can't modify buffers before the 412 * transaction has been assigned; you can't modify buffers which don't 413 * belong to objects which this transaction holds; you can't hold 414 * objects once the transaction has been assigned. You may hold an 415 * object which you are going to free (with dmu_object_free()), but you 416 * don't have to. 417 * 418 * You can abort the transaction before it has been assigned. 419 * 420 * Note that you may hold buffers (with dmu_buf_hold) at any time, 421 * regardless of transaction state. 422 */ 423 424 #define DMU_NEW_OBJECT (-1ULL) 425 #define DMU_OBJECT_END (-1ULL) 426 427 dmu_tx_t *dmu_tx_create(objset_t *os); 428 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 429 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 430 uint64_t len); 431 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name); 432 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 433 void dmu_tx_abort(dmu_tx_t *tx); 434 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 435 void dmu_tx_wait(dmu_tx_t *tx); 436 void dmu_tx_commit(dmu_tx_t *tx); 437 438 /* 439 * Free up the data blocks for a defined range of a file. If size is 440 * zero, the range from offset to end-of-file is freed. 441 */ 442 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 443 uint64_t size, dmu_tx_t *tx); 444 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 445 uint64_t size); 446 int dmu_free_object(objset_t *os, uint64_t object); 447 448 /* 449 * Convenience functions. 450 * 451 * Canfail routines will return 0 on success, or an errno if there is a 452 * nonrecoverable I/O error. 453 */ 454 #define DMU_READ_PREFETCH 0 /* prefetch */ 455 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */ 456 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 457 void *buf, uint32_t flags); 458 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 459 const void *buf, dmu_tx_t *tx); 460 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 461 dmu_tx_t *tx); 462 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 463 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 464 dmu_tx_t *tx); 465 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 466 uint64_t size, struct page *pp, dmu_tx_t *tx); 467 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size); 468 void dmu_return_arcbuf(struct arc_buf *buf); 469 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf, 470 dmu_tx_t *tx); 471 472 extern int zfs_prefetch_disable; 473 474 /* 475 * Asynchronously try to read in the data. 476 */ 477 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 478 uint64_t len); 479 480 typedef struct dmu_object_info { 481 /* All sizes are in bytes. */ 482 uint32_t doi_data_block_size; 483 uint32_t doi_metadata_block_size; 484 uint64_t doi_bonus_size; 485 dmu_object_type_t doi_type; 486 dmu_object_type_t doi_bonus_type; 487 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 488 uint8_t doi_checksum; 489 uint8_t doi_compress; 490 uint8_t doi_pad[5]; 491 /* Values below are number of 512-byte blocks. */ 492 uint64_t doi_physical_blks; /* data + metadata */ 493 uint64_t doi_max_block_offset; 494 } dmu_object_info_t; 495 496 typedef void arc_byteswap_func_t(void *buf, size_t size); 497 498 typedef struct dmu_object_type_info { 499 arc_byteswap_func_t *ot_byteswap; 500 boolean_t ot_metadata; 501 char *ot_name; 502 } dmu_object_type_info_t; 503 504 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 505 506 /* 507 * Get information on a DMU object. 508 * 509 * Return 0 on success or ENOENT if object is not allocated. 510 * 511 * If doi is NULL, just indicates whether the object exists. 512 */ 513 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 514 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 515 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 516 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 517 u_longlong_t *nblk512); 518 519 typedef struct dmu_objset_stats { 520 uint64_t dds_num_clones; /* number of clones of this */ 521 uint64_t dds_creation_txg; 522 uint64_t dds_guid; 523 dmu_objset_type_t dds_type; 524 uint8_t dds_is_snapshot; 525 uint8_t dds_inconsistent; 526 char dds_origin[MAXNAMELEN]; 527 } dmu_objset_stats_t; 528 529 /* 530 * Get stats on a dataset. 531 */ 532 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 533 534 /* 535 * Add entries to the nvlist for all the objset's properties. See 536 * zfs_prop_table[] and zfs(1m) for details on the properties. 537 */ 538 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 539 540 /* 541 * Get the space usage statistics for statvfs(). 542 * 543 * refdbytes is the amount of space "referenced" by this objset. 544 * availbytes is the amount of space available to this objset, taking 545 * into account quotas & reservations, assuming that no other objsets 546 * use the space first. These values correspond to the 'referenced' and 547 * 'available' properties, described in the zfs(1m) manpage. 548 * 549 * usedobjs and availobjs are the number of objects currently allocated, 550 * and available. 551 */ 552 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 553 uint64_t *usedobjsp, uint64_t *availobjsp); 554 555 /* 556 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 557 * (Contrast with the ds_guid which is a 64-bit ID that will never 558 * change, so there is a small probability that it will collide.) 559 */ 560 uint64_t dmu_objset_fsid_guid(objset_t *os); 561 562 /* 563 * Get the [cm]time for an objset's snapshot dir 564 */ 565 timestruc_t dmu_objset_snap_cmtime(objset_t *os); 566 567 int dmu_objset_is_snapshot(objset_t *os); 568 569 extern struct spa *dmu_objset_spa(objset_t *os); 570 extern struct zilog *dmu_objset_zil(objset_t *os); 571 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 572 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 573 extern void dmu_objset_name(objset_t *os, char *buf); 574 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 575 extern uint64_t dmu_objset_id(objset_t *os); 576 extern uint64_t dmu_objset_logbias(objset_t *os); 577 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 578 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 579 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 580 int maxlen, boolean_t *conflict); 581 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 582 uint64_t *idp, uint64_t *offp); 583 584 typedef int objset_used_cb_t(dmu_object_type_t bonustype, 585 void *bonus, uint64_t *userp, uint64_t *groupp); 586 extern void dmu_objset_register_type(dmu_objset_type_t ost, 587 objset_used_cb_t *cb); 588 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 589 extern void *dmu_objset_get_user(objset_t *os); 590 591 /* 592 * Return the txg number for the given assigned transaction. 593 */ 594 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 595 596 /* 597 * Synchronous write. 598 * If a parent zio is provided this function initiates a write on the 599 * provided buffer as a child of the parent zio. 600 * In the absence of a parent zio, the write is completed synchronously. 601 * At write completion, blk is filled with the bp of the written block. 602 * Note that while the data covered by this function will be on stable 603 * storage when the write completes this new data does not become a 604 * permanent part of the file until the associated transaction commits. 605 */ 606 typedef void dmu_sync_cb_t(dmu_buf_t *db, void *arg); 607 int dmu_sync(struct zio *zio, dmu_buf_t *db, 608 struct blkptr *bp, uint64_t txg, dmu_sync_cb_t *done, void *arg); 609 610 /* 611 * Find the next hole or data block in file starting at *off 612 * Return found offset in *off. Return ESRCH for end of file. 613 */ 614 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 615 uint64_t *off); 616 617 /* 618 * Initial setup and final teardown. 619 */ 620 extern void dmu_init(void); 621 extern void dmu_fini(void); 622 623 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 624 uint64_t object, uint64_t offset, int len); 625 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 626 dmu_traverse_cb_t cb, void *arg); 627 628 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin, 629 struct vnode *vp, offset_t *off); 630 631 typedef struct dmu_recv_cookie { 632 /* 633 * This structure is opaque! 634 * 635 * If logical and real are different, we are recving the stream 636 * into the "real" temporary clone, and then switching it with 637 * the "logical" target. 638 */ 639 struct dsl_dataset *drc_logical_ds; 640 struct dsl_dataset *drc_real_ds; 641 struct drr_begin *drc_drrb; 642 char *drc_tosnap; 643 boolean_t drc_newfs; 644 boolean_t drc_force; 645 } dmu_recv_cookie_t; 646 647 int dmu_recv_begin(char *tofs, char *tosnap, struct drr_begin *, 648 boolean_t force, objset_t *origin, dmu_recv_cookie_t *); 649 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp); 650 int dmu_recv_end(dmu_recv_cookie_t *drc); 651 652 /* CRC64 table */ 653 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 654 extern uint64_t zfs_crc64_table[256]; 655 656 #ifdef __cplusplus 657 } 658 #endif 659 660 #endif /* _SYS_DMU_H */ 661