1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved. 23 * Copyright (c) 2011, 2014 by Delphix. All rights reserved. 24 */ 25 26 #include <sys/dsl_scan.h> 27 #include <sys/dsl_pool.h> 28 #include <sys/dsl_dataset.h> 29 #include <sys/dsl_prop.h> 30 #include <sys/dsl_dir.h> 31 #include <sys/dsl_synctask.h> 32 #include <sys/dnode.h> 33 #include <sys/dmu_tx.h> 34 #include <sys/dmu_objset.h> 35 #include <sys/arc.h> 36 #include <sys/zap.h> 37 #include <sys/zio.h> 38 #include <sys/zfs_context.h> 39 #include <sys/fs/zfs.h> 40 #include <sys/zfs_znode.h> 41 #include <sys/spa_impl.h> 42 #include <sys/vdev_impl.h> 43 #include <sys/zil_impl.h> 44 #include <sys/zio_checksum.h> 45 #include <sys/ddt.h> 46 #include <sys/sa.h> 47 #include <sys/sa_impl.h> 48 #include <sys/zfeature.h> 49 #ifdef _KERNEL 50 #include <sys/zfs_vfsops.h> 51 #endif 52 53 typedef int (scan_cb_t)(dsl_pool_t *, const blkptr_t *, 54 const zbookmark_phys_t *); 55 56 static scan_cb_t dsl_scan_scrub_cb; 57 static void dsl_scan_cancel_sync(void *, dmu_tx_t *); 58 static void dsl_scan_sync_state(dsl_scan_t *, dmu_tx_t *tx); 59 60 int zfs_top_maxinflight = 32; /* maximum I/Os per top-level */ 61 int zfs_resilver_delay = 2; /* number of ticks to delay resilver */ 62 int zfs_scrub_delay = 4; /* number of ticks to delay scrub */ 63 int zfs_scan_idle = 50; /* idle window in clock ticks */ 64 65 int zfs_scan_min_time_ms = 1000; /* min millisecs to scrub per txg */ 66 int zfs_free_min_time_ms = 1000; /* min millisecs to free per txg */ 67 int zfs_resilver_min_time_ms = 3000; /* min millisecs to resilver per txg */ 68 boolean_t zfs_no_scrub_io = B_FALSE; /* set to disable scrub i/o */ 69 boolean_t zfs_no_scrub_prefetch = B_FALSE; /* set to disable scrub prefetch */ 70 enum ddt_class zfs_scrub_ddt_class_max = DDT_CLASS_DUPLICATE; 71 int dsl_scan_delay_completion = B_FALSE; /* set to delay scan completion */ 72 /* max number of blocks to free in a single TXG */ 73 uint64_t zfs_free_max_blocks = UINT64_MAX; 74 75 #define DSL_SCAN_IS_SCRUB_RESILVER(scn) \ 76 ((scn)->scn_phys.scn_func == POOL_SCAN_SCRUB || \ 77 (scn)->scn_phys.scn_func == POOL_SCAN_RESILVER) 78 79 extern int zfs_txg_timeout; 80 81 /* the order has to match pool_scan_type */ 82 static scan_cb_t *scan_funcs[POOL_SCAN_FUNCS] = { 83 NULL, 84 dsl_scan_scrub_cb, /* POOL_SCAN_SCRUB */ 85 dsl_scan_scrub_cb, /* POOL_SCAN_RESILVER */ 86 }; 87 88 int 89 dsl_scan_init(dsl_pool_t *dp, uint64_t txg) 90 { 91 int err; 92 dsl_scan_t *scn; 93 spa_t *spa = dp->dp_spa; 94 uint64_t f; 95 96 scn = dp->dp_scan = kmem_zalloc(sizeof (dsl_scan_t), KM_SLEEP); 97 scn->scn_dp = dp; 98 99 /* 100 * It's possible that we're resuming a scan after a reboot so 101 * make sure that the scan_async_destroying flag is initialized 102 * appropriately. 103 */ 104 ASSERT(!scn->scn_async_destroying); 105 scn->scn_async_destroying = spa_feature_is_active(dp->dp_spa, 106 SPA_FEATURE_ASYNC_DESTROY); 107 108 err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, 109 "scrub_func", sizeof (uint64_t), 1, &f); 110 if (err == 0) { 111 /* 112 * There was an old-style scrub in progress. Restart a 113 * new-style scrub from the beginning. 114 */ 115 scn->scn_restart_txg = txg; 116 zfs_dbgmsg("old-style scrub was in progress; " 117 "restarting new-style scrub in txg %llu", 118 scn->scn_restart_txg); 119 120 /* 121 * Load the queue obj from the old location so that it 122 * can be freed by dsl_scan_done(). 123 */ 124 (void) zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, 125 "scrub_queue", sizeof (uint64_t), 1, 126 &scn->scn_phys.scn_queue_obj); 127 } else { 128 err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT, 129 DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS, 130 &scn->scn_phys); 131 if (err == ENOENT) 132 return (0); 133 else if (err) 134 return (err); 135 136 if (scn->scn_phys.scn_state == DSS_SCANNING && 137 spa_prev_software_version(dp->dp_spa) < SPA_VERSION_SCAN) { 138 /* 139 * A new-type scrub was in progress on an old 140 * pool, and the pool was accessed by old 141 * software. Restart from the beginning, since 142 * the old software may have changed the pool in 143 * the meantime. 144 */ 145 scn->scn_restart_txg = txg; 146 zfs_dbgmsg("new-style scrub was modified " 147 "by old software; restarting in txg %llu", 148 scn->scn_restart_txg); 149 } 150 } 151 152 spa_scan_stat_init(spa); 153 return (0); 154 } 155 156 void 157 dsl_scan_fini(dsl_pool_t *dp) 158 { 159 if (dp->dp_scan) { 160 kmem_free(dp->dp_scan, sizeof (dsl_scan_t)); 161 dp->dp_scan = NULL; 162 } 163 } 164 165 /* ARGSUSED */ 166 static int 167 dsl_scan_setup_check(void *arg, dmu_tx_t *tx) 168 { 169 dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan; 170 171 if (scn->scn_phys.scn_state == DSS_SCANNING) 172 return (SET_ERROR(EBUSY)); 173 174 return (0); 175 } 176 177 static void 178 dsl_scan_setup_sync(void *arg, dmu_tx_t *tx) 179 { 180 dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan; 181 pool_scan_func_t *funcp = arg; 182 dmu_object_type_t ot = 0; 183 dsl_pool_t *dp = scn->scn_dp; 184 spa_t *spa = dp->dp_spa; 185 186 ASSERT(scn->scn_phys.scn_state != DSS_SCANNING); 187 ASSERT(*funcp > POOL_SCAN_NONE && *funcp < POOL_SCAN_FUNCS); 188 bzero(&scn->scn_phys, sizeof (scn->scn_phys)); 189 scn->scn_phys.scn_func = *funcp; 190 scn->scn_phys.scn_state = DSS_SCANNING; 191 scn->scn_phys.scn_min_txg = 0; 192 scn->scn_phys.scn_max_txg = tx->tx_txg; 193 scn->scn_phys.scn_ddt_class_max = DDT_CLASSES - 1; /* the entire DDT */ 194 scn->scn_phys.scn_start_time = gethrestime_sec(); 195 scn->scn_phys.scn_errors = 0; 196 scn->scn_phys.scn_to_examine = spa->spa_root_vdev->vdev_stat.vs_alloc; 197 scn->scn_restart_txg = 0; 198 scn->scn_done_txg = 0; 199 spa_scan_stat_init(spa); 200 201 if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) { 202 scn->scn_phys.scn_ddt_class_max = zfs_scrub_ddt_class_max; 203 204 /* rewrite all disk labels */ 205 vdev_config_dirty(spa->spa_root_vdev); 206 207 if (vdev_resilver_needed(spa->spa_root_vdev, 208 &scn->scn_phys.scn_min_txg, &scn->scn_phys.scn_max_txg)) { 209 spa_event_notify(spa, NULL, ESC_ZFS_RESILVER_START); 210 } else { 211 spa_event_notify(spa, NULL, ESC_ZFS_SCRUB_START); 212 } 213 214 spa->spa_scrub_started = B_TRUE; 215 /* 216 * If this is an incremental scrub, limit the DDT scrub phase 217 * to just the auto-ditto class (for correctness); the rest 218 * of the scrub should go faster using top-down pruning. 219 */ 220 if (scn->scn_phys.scn_min_txg > TXG_INITIAL) 221 scn->scn_phys.scn_ddt_class_max = DDT_CLASS_DITTO; 222 223 } 224 225 /* back to the generic stuff */ 226 227 if (dp->dp_blkstats == NULL) { 228 dp->dp_blkstats = 229 kmem_alloc(sizeof (zfs_all_blkstats_t), KM_SLEEP); 230 } 231 bzero(dp->dp_blkstats, sizeof (zfs_all_blkstats_t)); 232 233 if (spa_version(spa) < SPA_VERSION_DSL_SCRUB) 234 ot = DMU_OT_ZAP_OTHER; 235 236 scn->scn_phys.scn_queue_obj = zap_create(dp->dp_meta_objset, 237 ot ? ot : DMU_OT_SCAN_QUEUE, DMU_OT_NONE, 0, tx); 238 239 dsl_scan_sync_state(scn, tx); 240 241 spa_history_log_internal(spa, "scan setup", tx, 242 "func=%u mintxg=%llu maxtxg=%llu", 243 *funcp, scn->scn_phys.scn_min_txg, scn->scn_phys.scn_max_txg); 244 } 245 246 /* ARGSUSED */ 247 static void 248 dsl_scan_done(dsl_scan_t *scn, boolean_t complete, dmu_tx_t *tx) 249 { 250 static const char *old_names[] = { 251 "scrub_bookmark", 252 "scrub_ddt_bookmark", 253 "scrub_ddt_class_max", 254 "scrub_queue", 255 "scrub_min_txg", 256 "scrub_max_txg", 257 "scrub_func", 258 "scrub_errors", 259 NULL 260 }; 261 262 dsl_pool_t *dp = scn->scn_dp; 263 spa_t *spa = dp->dp_spa; 264 int i; 265 266 /* Remove any remnants of an old-style scrub. */ 267 for (i = 0; old_names[i]; i++) { 268 (void) zap_remove(dp->dp_meta_objset, 269 DMU_POOL_DIRECTORY_OBJECT, old_names[i], tx); 270 } 271 272 if (scn->scn_phys.scn_queue_obj != 0) { 273 VERIFY(0 == dmu_object_free(dp->dp_meta_objset, 274 scn->scn_phys.scn_queue_obj, tx)); 275 scn->scn_phys.scn_queue_obj = 0; 276 } 277 278 /* 279 * If we were "restarted" from a stopped state, don't bother 280 * with anything else. 281 */ 282 if (scn->scn_phys.scn_state != DSS_SCANNING) 283 return; 284 285 if (complete) 286 scn->scn_phys.scn_state = DSS_FINISHED; 287 else 288 scn->scn_phys.scn_state = DSS_CANCELED; 289 290 spa_history_log_internal(spa, "scan done", tx, 291 "complete=%u", complete); 292 293 if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) { 294 mutex_enter(&spa->spa_scrub_lock); 295 while (spa->spa_scrub_inflight > 0) { 296 cv_wait(&spa->spa_scrub_io_cv, 297 &spa->spa_scrub_lock); 298 } 299 mutex_exit(&spa->spa_scrub_lock); 300 spa->spa_scrub_started = B_FALSE; 301 spa->spa_scrub_active = B_FALSE; 302 303 /* 304 * If the scrub/resilver completed, update all DTLs to 305 * reflect this. Whether it succeeded or not, vacate 306 * all temporary scrub DTLs. 307 */ 308 vdev_dtl_reassess(spa->spa_root_vdev, tx->tx_txg, 309 complete ? scn->scn_phys.scn_max_txg : 0, B_TRUE); 310 if (complete) { 311 spa_event_notify(spa, NULL, scn->scn_phys.scn_min_txg ? 312 ESC_ZFS_RESILVER_FINISH : ESC_ZFS_SCRUB_FINISH); 313 } 314 spa_errlog_rotate(spa); 315 316 /* 317 * We may have finished replacing a device. 318 * Let the async thread assess this and handle the detach. 319 */ 320 spa_async_request(spa, SPA_ASYNC_RESILVER_DONE); 321 } 322 323 scn->scn_phys.scn_end_time = gethrestime_sec(); 324 } 325 326 /* ARGSUSED */ 327 static int 328 dsl_scan_cancel_check(void *arg, dmu_tx_t *tx) 329 { 330 dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan; 331 332 if (scn->scn_phys.scn_state != DSS_SCANNING) 333 return (SET_ERROR(ENOENT)); 334 return (0); 335 } 336 337 /* ARGSUSED */ 338 static void 339 dsl_scan_cancel_sync(void *arg, dmu_tx_t *tx) 340 { 341 dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan; 342 343 dsl_scan_done(scn, B_FALSE, tx); 344 dsl_scan_sync_state(scn, tx); 345 } 346 347 int 348 dsl_scan_cancel(dsl_pool_t *dp) 349 { 350 return (dsl_sync_task(spa_name(dp->dp_spa), dsl_scan_cancel_check, 351 dsl_scan_cancel_sync, NULL, 3, ZFS_SPACE_CHECK_RESERVED)); 352 } 353 354 static void dsl_scan_visitbp(blkptr_t *bp, const zbookmark_phys_t *zb, 355 dnode_phys_t *dnp, dsl_dataset_t *ds, dsl_scan_t *scn, 356 dmu_objset_type_t ostype, dmu_tx_t *tx); 357 static void dsl_scan_visitdnode(dsl_scan_t *, dsl_dataset_t *ds, 358 dmu_objset_type_t ostype, 359 dnode_phys_t *dnp, uint64_t object, dmu_tx_t *tx); 360 361 void 362 dsl_free(dsl_pool_t *dp, uint64_t txg, const blkptr_t *bp) 363 { 364 zio_free(dp->dp_spa, txg, bp); 365 } 366 367 void 368 dsl_free_sync(zio_t *pio, dsl_pool_t *dp, uint64_t txg, const blkptr_t *bpp) 369 { 370 ASSERT(dsl_pool_sync_context(dp)); 371 zio_nowait(zio_free_sync(pio, dp->dp_spa, txg, bpp, pio->io_flags)); 372 } 373 374 static uint64_t 375 dsl_scan_ds_maxtxg(dsl_dataset_t *ds) 376 { 377 uint64_t smt = ds->ds_dir->dd_pool->dp_scan->scn_phys.scn_max_txg; 378 if (ds->ds_is_snapshot) 379 return (MIN(smt, dsl_dataset_phys(ds)->ds_creation_txg)); 380 return (smt); 381 } 382 383 static void 384 dsl_scan_sync_state(dsl_scan_t *scn, dmu_tx_t *tx) 385 { 386 VERIFY0(zap_update(scn->scn_dp->dp_meta_objset, 387 DMU_POOL_DIRECTORY_OBJECT, 388 DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS, 389 &scn->scn_phys, tx)); 390 } 391 392 extern int zfs_vdev_async_write_active_min_dirty_percent; 393 394 static boolean_t 395 dsl_scan_check_pause(dsl_scan_t *scn, const zbookmark_phys_t *zb) 396 { 397 /* we never skip user/group accounting objects */ 398 if (zb && (int64_t)zb->zb_object < 0) 399 return (B_FALSE); 400 401 if (scn->scn_pausing) 402 return (B_TRUE); /* we're already pausing */ 403 404 if (!ZB_IS_ZERO(&scn->scn_phys.scn_bookmark)) 405 return (B_FALSE); /* we're resuming */ 406 407 /* We only know how to resume from level-0 blocks. */ 408 if (zb && zb->zb_level != 0) 409 return (B_FALSE); 410 411 /* 412 * We pause if: 413 * - we have scanned for the maximum time: an entire txg 414 * timeout (default 5 sec) 415 * or 416 * - we have scanned for at least the minimum time (default 1 sec 417 * for scrub, 3 sec for resilver), and either we have sufficient 418 * dirty data that we are starting to write more quickly 419 * (default 30%), or someone is explicitly waiting for this txg 420 * to complete. 421 * or 422 * - the spa is shutting down because this pool is being exported 423 * or the machine is rebooting. 424 */ 425 int mintime = (scn->scn_phys.scn_func == POOL_SCAN_RESILVER) ? 426 zfs_resilver_min_time_ms : zfs_scan_min_time_ms; 427 uint64_t elapsed_nanosecs = gethrtime() - scn->scn_sync_start_time; 428 int dirty_pct = scn->scn_dp->dp_dirty_total * 100 / zfs_dirty_data_max; 429 if (elapsed_nanosecs / NANOSEC >= zfs_txg_timeout || 430 (NSEC2MSEC(elapsed_nanosecs) > mintime && 431 (txg_sync_waiting(scn->scn_dp) || 432 dirty_pct >= zfs_vdev_async_write_active_min_dirty_percent)) || 433 spa_shutting_down(scn->scn_dp->dp_spa)) { 434 if (zb) { 435 dprintf("pausing at bookmark %llx/%llx/%llx/%llx\n", 436 (longlong_t)zb->zb_objset, 437 (longlong_t)zb->zb_object, 438 (longlong_t)zb->zb_level, 439 (longlong_t)zb->zb_blkid); 440 scn->scn_phys.scn_bookmark = *zb; 441 } 442 dprintf("pausing at DDT bookmark %llx/%llx/%llx/%llx\n", 443 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_class, 444 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_type, 445 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_checksum, 446 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_cursor); 447 scn->scn_pausing = B_TRUE; 448 return (B_TRUE); 449 } 450 return (B_FALSE); 451 } 452 453 typedef struct zil_scan_arg { 454 dsl_pool_t *zsa_dp; 455 zil_header_t *zsa_zh; 456 } zil_scan_arg_t; 457 458 /* ARGSUSED */ 459 static int 460 dsl_scan_zil_block(zilog_t *zilog, blkptr_t *bp, void *arg, uint64_t claim_txg) 461 { 462 zil_scan_arg_t *zsa = arg; 463 dsl_pool_t *dp = zsa->zsa_dp; 464 dsl_scan_t *scn = dp->dp_scan; 465 zil_header_t *zh = zsa->zsa_zh; 466 zbookmark_phys_t zb; 467 468 if (BP_IS_HOLE(bp) || bp->blk_birth <= scn->scn_phys.scn_cur_min_txg) 469 return (0); 470 471 /* 472 * One block ("stubby") can be allocated a long time ago; we 473 * want to visit that one because it has been allocated 474 * (on-disk) even if it hasn't been claimed (even though for 475 * scrub there's nothing to do to it). 476 */ 477 if (claim_txg == 0 && bp->blk_birth >= spa_first_txg(dp->dp_spa)) 478 return (0); 479 480 SET_BOOKMARK(&zb, zh->zh_log.blk_cksum.zc_word[ZIL_ZC_OBJSET], 481 ZB_ZIL_OBJECT, ZB_ZIL_LEVEL, bp->blk_cksum.zc_word[ZIL_ZC_SEQ]); 482 483 VERIFY(0 == scan_funcs[scn->scn_phys.scn_func](dp, bp, &zb)); 484 return (0); 485 } 486 487 /* ARGSUSED */ 488 static int 489 dsl_scan_zil_record(zilog_t *zilog, lr_t *lrc, void *arg, uint64_t claim_txg) 490 { 491 if (lrc->lrc_txtype == TX_WRITE) { 492 zil_scan_arg_t *zsa = arg; 493 dsl_pool_t *dp = zsa->zsa_dp; 494 dsl_scan_t *scn = dp->dp_scan; 495 zil_header_t *zh = zsa->zsa_zh; 496 lr_write_t *lr = (lr_write_t *)lrc; 497 blkptr_t *bp = &lr->lr_blkptr; 498 zbookmark_phys_t zb; 499 500 if (BP_IS_HOLE(bp) || 501 bp->blk_birth <= scn->scn_phys.scn_cur_min_txg) 502 return (0); 503 504 /* 505 * birth can be < claim_txg if this record's txg is 506 * already txg sync'ed (but this log block contains 507 * other records that are not synced) 508 */ 509 if (claim_txg == 0 || bp->blk_birth < claim_txg) 510 return (0); 511 512 SET_BOOKMARK(&zb, zh->zh_log.blk_cksum.zc_word[ZIL_ZC_OBJSET], 513 lr->lr_foid, ZB_ZIL_LEVEL, 514 lr->lr_offset / BP_GET_LSIZE(bp)); 515 516 VERIFY(0 == scan_funcs[scn->scn_phys.scn_func](dp, bp, &zb)); 517 } 518 return (0); 519 } 520 521 static void 522 dsl_scan_zil(dsl_pool_t *dp, zil_header_t *zh) 523 { 524 uint64_t claim_txg = zh->zh_claim_txg; 525 zil_scan_arg_t zsa = { dp, zh }; 526 zilog_t *zilog; 527 528 /* 529 * We only want to visit blocks that have been claimed but not yet 530 * replayed (or, in read-only mode, blocks that *would* be claimed). 531 */ 532 if (claim_txg == 0 && spa_writeable(dp->dp_spa)) 533 return; 534 535 zilog = zil_alloc(dp->dp_meta_objset, zh); 536 537 (void) zil_parse(zilog, dsl_scan_zil_block, dsl_scan_zil_record, &zsa, 538 claim_txg); 539 540 zil_free(zilog); 541 } 542 543 /* ARGSUSED */ 544 static void 545 dsl_scan_prefetch(dsl_scan_t *scn, arc_buf_t *buf, blkptr_t *bp, 546 uint64_t objset, uint64_t object, uint64_t blkid) 547 { 548 zbookmark_phys_t czb; 549 arc_flags_t flags = ARC_FLAG_NOWAIT | ARC_FLAG_PREFETCH; 550 551 if (zfs_no_scrub_prefetch) 552 return; 553 554 if (BP_IS_HOLE(bp) || bp->blk_birth <= scn->scn_phys.scn_min_txg || 555 (BP_GET_LEVEL(bp) == 0 && BP_GET_TYPE(bp) != DMU_OT_DNODE)) 556 return; 557 558 SET_BOOKMARK(&czb, objset, object, BP_GET_LEVEL(bp), blkid); 559 560 (void) arc_read(scn->scn_zio_root, scn->scn_dp->dp_spa, bp, 561 NULL, NULL, ZIO_PRIORITY_ASYNC_READ, 562 ZIO_FLAG_CANFAIL | ZIO_FLAG_SCAN_THREAD, &flags, &czb); 563 } 564 565 static boolean_t 566 dsl_scan_check_resume(dsl_scan_t *scn, const dnode_phys_t *dnp, 567 const zbookmark_phys_t *zb) 568 { 569 /* 570 * We never skip over user/group accounting objects (obj<0) 571 */ 572 if (!ZB_IS_ZERO(&scn->scn_phys.scn_bookmark) && 573 (int64_t)zb->zb_object >= 0) { 574 /* 575 * If we already visited this bp & everything below (in 576 * a prior txg sync), don't bother doing it again. 577 */ 578 if (zbookmark_is_before(dnp, zb, &scn->scn_phys.scn_bookmark)) 579 return (B_TRUE); 580 581 /* 582 * If we found the block we're trying to resume from, or 583 * we went past it to a different object, zero it out to 584 * indicate that it's OK to start checking for pausing 585 * again. 586 */ 587 if (bcmp(zb, &scn->scn_phys.scn_bookmark, sizeof (*zb)) == 0 || 588 zb->zb_object > scn->scn_phys.scn_bookmark.zb_object) { 589 dprintf("resuming at %llx/%llx/%llx/%llx\n", 590 (longlong_t)zb->zb_objset, 591 (longlong_t)zb->zb_object, 592 (longlong_t)zb->zb_level, 593 (longlong_t)zb->zb_blkid); 594 bzero(&scn->scn_phys.scn_bookmark, sizeof (*zb)); 595 } 596 } 597 return (B_FALSE); 598 } 599 600 /* 601 * Return nonzero on i/o error. 602 * Return new buf to write out in *bufp. 603 */ 604 static int 605 dsl_scan_recurse(dsl_scan_t *scn, dsl_dataset_t *ds, dmu_objset_type_t ostype, 606 dnode_phys_t *dnp, const blkptr_t *bp, 607 const zbookmark_phys_t *zb, dmu_tx_t *tx) 608 { 609 dsl_pool_t *dp = scn->scn_dp; 610 int zio_flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_SCAN_THREAD; 611 int err; 612 613 if (BP_GET_LEVEL(bp) > 0) { 614 arc_flags_t flags = ARC_FLAG_WAIT; 615 int i; 616 blkptr_t *cbp; 617 int epb = BP_GET_LSIZE(bp) >> SPA_BLKPTRSHIFT; 618 arc_buf_t *buf; 619 620 err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, &buf, 621 ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb); 622 if (err) { 623 scn->scn_phys.scn_errors++; 624 return (err); 625 } 626 for (i = 0, cbp = buf->b_data; i < epb; i++, cbp++) { 627 dsl_scan_prefetch(scn, buf, cbp, zb->zb_objset, 628 zb->zb_object, zb->zb_blkid * epb + i); 629 } 630 for (i = 0, cbp = buf->b_data; i < epb; i++, cbp++) { 631 zbookmark_phys_t czb; 632 633 SET_BOOKMARK(&czb, zb->zb_objset, zb->zb_object, 634 zb->zb_level - 1, 635 zb->zb_blkid * epb + i); 636 dsl_scan_visitbp(cbp, &czb, dnp, 637 ds, scn, ostype, tx); 638 } 639 (void) arc_buf_remove_ref(buf, &buf); 640 } else if (BP_GET_TYPE(bp) == DMU_OT_DNODE) { 641 arc_flags_t flags = ARC_FLAG_WAIT; 642 dnode_phys_t *cdnp; 643 int i, j; 644 int epb = BP_GET_LSIZE(bp) >> DNODE_SHIFT; 645 arc_buf_t *buf; 646 647 err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, &buf, 648 ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb); 649 if (err) { 650 scn->scn_phys.scn_errors++; 651 return (err); 652 } 653 for (i = 0, cdnp = buf->b_data; i < epb; i++, cdnp++) { 654 for (j = 0; j < cdnp->dn_nblkptr; j++) { 655 blkptr_t *cbp = &cdnp->dn_blkptr[j]; 656 dsl_scan_prefetch(scn, buf, cbp, 657 zb->zb_objset, zb->zb_blkid * epb + i, j); 658 } 659 } 660 for (i = 0, cdnp = buf->b_data; i < epb; i++, cdnp++) { 661 dsl_scan_visitdnode(scn, ds, ostype, 662 cdnp, zb->zb_blkid * epb + i, tx); 663 } 664 665 (void) arc_buf_remove_ref(buf, &buf); 666 } else if (BP_GET_TYPE(bp) == DMU_OT_OBJSET) { 667 arc_flags_t flags = ARC_FLAG_WAIT; 668 objset_phys_t *osp; 669 arc_buf_t *buf; 670 671 err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, &buf, 672 ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb); 673 if (err) { 674 scn->scn_phys.scn_errors++; 675 return (err); 676 } 677 678 osp = buf->b_data; 679 680 dsl_scan_visitdnode(scn, ds, osp->os_type, 681 &osp->os_meta_dnode, DMU_META_DNODE_OBJECT, tx); 682 683 if (OBJSET_BUF_HAS_USERUSED(buf)) { 684 /* 685 * We also always visit user/group accounting 686 * objects, and never skip them, even if we are 687 * pausing. This is necessary so that the space 688 * deltas from this txg get integrated. 689 */ 690 dsl_scan_visitdnode(scn, ds, osp->os_type, 691 &osp->os_groupused_dnode, 692 DMU_GROUPUSED_OBJECT, tx); 693 dsl_scan_visitdnode(scn, ds, osp->os_type, 694 &osp->os_userused_dnode, 695 DMU_USERUSED_OBJECT, tx); 696 } 697 (void) arc_buf_remove_ref(buf, &buf); 698 } 699 700 return (0); 701 } 702 703 static void 704 dsl_scan_visitdnode(dsl_scan_t *scn, dsl_dataset_t *ds, 705 dmu_objset_type_t ostype, dnode_phys_t *dnp, 706 uint64_t object, dmu_tx_t *tx) 707 { 708 int j; 709 710 for (j = 0; j < dnp->dn_nblkptr; j++) { 711 zbookmark_phys_t czb; 712 713 SET_BOOKMARK(&czb, ds ? ds->ds_object : 0, object, 714 dnp->dn_nlevels - 1, j); 715 dsl_scan_visitbp(&dnp->dn_blkptr[j], 716 &czb, dnp, ds, scn, ostype, tx); 717 } 718 719 if (dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) { 720 zbookmark_phys_t czb; 721 SET_BOOKMARK(&czb, ds ? ds->ds_object : 0, object, 722 0, DMU_SPILL_BLKID); 723 dsl_scan_visitbp(&dnp->dn_spill, 724 &czb, dnp, ds, scn, ostype, tx); 725 } 726 } 727 728 /* 729 * The arguments are in this order because mdb can only print the 730 * first 5; we want them to be useful. 731 */ 732 static void 733 dsl_scan_visitbp(blkptr_t *bp, const zbookmark_phys_t *zb, 734 dnode_phys_t *dnp, dsl_dataset_t *ds, dsl_scan_t *scn, 735 dmu_objset_type_t ostype, dmu_tx_t *tx) 736 { 737 dsl_pool_t *dp = scn->scn_dp; 738 arc_buf_t *buf = NULL; 739 blkptr_t bp_toread = *bp; 740 741 /* ASSERT(pbuf == NULL || arc_released(pbuf)); */ 742 743 if (dsl_scan_check_pause(scn, zb)) 744 return; 745 746 if (dsl_scan_check_resume(scn, dnp, zb)) 747 return; 748 749 if (BP_IS_HOLE(bp)) 750 return; 751 752 scn->scn_visited_this_txg++; 753 754 dprintf_bp(bp, 755 "visiting ds=%p/%llu zb=%llx/%llx/%llx/%llx bp=%p", 756 ds, ds ? ds->ds_object : 0, 757 zb->zb_objset, zb->zb_object, zb->zb_level, zb->zb_blkid, 758 bp); 759 760 if (bp->blk_birth <= scn->scn_phys.scn_cur_min_txg) 761 return; 762 763 if (dsl_scan_recurse(scn, ds, ostype, dnp, &bp_toread, zb, tx) != 0) 764 return; 765 766 /* 767 * If dsl_scan_ddt() has aready visited this block, it will have 768 * already done any translations or scrubbing, so don't call the 769 * callback again. 770 */ 771 if (ddt_class_contains(dp->dp_spa, 772 scn->scn_phys.scn_ddt_class_max, bp)) { 773 ASSERT(buf == NULL); 774 return; 775 } 776 777 /* 778 * If this block is from the future (after cur_max_txg), then we 779 * are doing this on behalf of a deleted snapshot, and we will 780 * revisit the future block on the next pass of this dataset. 781 * Don't scan it now unless we need to because something 782 * under it was modified. 783 */ 784 if (BP_PHYSICAL_BIRTH(bp) <= scn->scn_phys.scn_cur_max_txg) { 785 scan_funcs[scn->scn_phys.scn_func](dp, bp, zb); 786 } 787 } 788 789 static void 790 dsl_scan_visit_rootbp(dsl_scan_t *scn, dsl_dataset_t *ds, blkptr_t *bp, 791 dmu_tx_t *tx) 792 { 793 zbookmark_phys_t zb; 794 795 SET_BOOKMARK(&zb, ds ? ds->ds_object : DMU_META_OBJSET, 796 ZB_ROOT_OBJECT, ZB_ROOT_LEVEL, ZB_ROOT_BLKID); 797 dsl_scan_visitbp(bp, &zb, NULL, 798 ds, scn, DMU_OST_NONE, tx); 799 800 dprintf_ds(ds, "finished scan%s", ""); 801 } 802 803 void 804 dsl_scan_ds_destroyed(dsl_dataset_t *ds, dmu_tx_t *tx) 805 { 806 dsl_pool_t *dp = ds->ds_dir->dd_pool; 807 dsl_scan_t *scn = dp->dp_scan; 808 uint64_t mintxg; 809 810 if (scn->scn_phys.scn_state != DSS_SCANNING) 811 return; 812 813 if (scn->scn_phys.scn_bookmark.zb_objset == ds->ds_object) { 814 if (ds->ds_is_snapshot) { 815 /* Note, scn_cur_{min,max}_txg stays the same. */ 816 scn->scn_phys.scn_bookmark.zb_objset = 817 dsl_dataset_phys(ds)->ds_next_snap_obj; 818 zfs_dbgmsg("destroying ds %llu; currently traversing; " 819 "reset zb_objset to %llu", 820 (u_longlong_t)ds->ds_object, 821 (u_longlong_t)dsl_dataset_phys(ds)-> 822 ds_next_snap_obj); 823 scn->scn_phys.scn_flags |= DSF_VISIT_DS_AGAIN; 824 } else { 825 SET_BOOKMARK(&scn->scn_phys.scn_bookmark, 826 ZB_DESTROYED_OBJSET, 0, 0, 0); 827 zfs_dbgmsg("destroying ds %llu; currently traversing; " 828 "reset bookmark to -1,0,0,0", 829 (u_longlong_t)ds->ds_object); 830 } 831 } else if (zap_lookup_int_key(dp->dp_meta_objset, 832 scn->scn_phys.scn_queue_obj, ds->ds_object, &mintxg) == 0) { 833 ASSERT3U(dsl_dataset_phys(ds)->ds_num_children, <=, 1); 834 VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset, 835 scn->scn_phys.scn_queue_obj, ds->ds_object, tx)); 836 if (ds->ds_is_snapshot) { 837 /* 838 * We keep the same mintxg; it could be > 839 * ds_creation_txg if the previous snapshot was 840 * deleted too. 841 */ 842 VERIFY(zap_add_int_key(dp->dp_meta_objset, 843 scn->scn_phys.scn_queue_obj, 844 dsl_dataset_phys(ds)->ds_next_snap_obj, 845 mintxg, tx) == 0); 846 zfs_dbgmsg("destroying ds %llu; in queue; " 847 "replacing with %llu", 848 (u_longlong_t)ds->ds_object, 849 (u_longlong_t)dsl_dataset_phys(ds)-> 850 ds_next_snap_obj); 851 } else { 852 zfs_dbgmsg("destroying ds %llu; in queue; removing", 853 (u_longlong_t)ds->ds_object); 854 } 855 } else { 856 zfs_dbgmsg("destroying ds %llu; ignoring", 857 (u_longlong_t)ds->ds_object); 858 } 859 860 /* 861 * dsl_scan_sync() should be called after this, and should sync 862 * out our changed state, but just to be safe, do it here. 863 */ 864 dsl_scan_sync_state(scn, tx); 865 } 866 867 void 868 dsl_scan_ds_snapshotted(dsl_dataset_t *ds, dmu_tx_t *tx) 869 { 870 dsl_pool_t *dp = ds->ds_dir->dd_pool; 871 dsl_scan_t *scn = dp->dp_scan; 872 uint64_t mintxg; 873 874 if (scn->scn_phys.scn_state != DSS_SCANNING) 875 return; 876 877 ASSERT(dsl_dataset_phys(ds)->ds_prev_snap_obj != 0); 878 879 if (scn->scn_phys.scn_bookmark.zb_objset == ds->ds_object) { 880 scn->scn_phys.scn_bookmark.zb_objset = 881 dsl_dataset_phys(ds)->ds_prev_snap_obj; 882 zfs_dbgmsg("snapshotting ds %llu; currently traversing; " 883 "reset zb_objset to %llu", 884 (u_longlong_t)ds->ds_object, 885 (u_longlong_t)dsl_dataset_phys(ds)->ds_prev_snap_obj); 886 } else if (zap_lookup_int_key(dp->dp_meta_objset, 887 scn->scn_phys.scn_queue_obj, ds->ds_object, &mintxg) == 0) { 888 VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset, 889 scn->scn_phys.scn_queue_obj, ds->ds_object, tx)); 890 VERIFY(zap_add_int_key(dp->dp_meta_objset, 891 scn->scn_phys.scn_queue_obj, 892 dsl_dataset_phys(ds)->ds_prev_snap_obj, mintxg, tx) == 0); 893 zfs_dbgmsg("snapshotting ds %llu; in queue; " 894 "replacing with %llu", 895 (u_longlong_t)ds->ds_object, 896 (u_longlong_t)dsl_dataset_phys(ds)->ds_prev_snap_obj); 897 } 898 dsl_scan_sync_state(scn, tx); 899 } 900 901 void 902 dsl_scan_ds_clone_swapped(dsl_dataset_t *ds1, dsl_dataset_t *ds2, dmu_tx_t *tx) 903 { 904 dsl_pool_t *dp = ds1->ds_dir->dd_pool; 905 dsl_scan_t *scn = dp->dp_scan; 906 uint64_t mintxg; 907 908 if (scn->scn_phys.scn_state != DSS_SCANNING) 909 return; 910 911 if (scn->scn_phys.scn_bookmark.zb_objset == ds1->ds_object) { 912 scn->scn_phys.scn_bookmark.zb_objset = ds2->ds_object; 913 zfs_dbgmsg("clone_swap ds %llu; currently traversing; " 914 "reset zb_objset to %llu", 915 (u_longlong_t)ds1->ds_object, 916 (u_longlong_t)ds2->ds_object); 917 } else if (scn->scn_phys.scn_bookmark.zb_objset == ds2->ds_object) { 918 scn->scn_phys.scn_bookmark.zb_objset = ds1->ds_object; 919 zfs_dbgmsg("clone_swap ds %llu; currently traversing; " 920 "reset zb_objset to %llu", 921 (u_longlong_t)ds2->ds_object, 922 (u_longlong_t)ds1->ds_object); 923 } 924 925 if (zap_lookup_int_key(dp->dp_meta_objset, scn->scn_phys.scn_queue_obj, 926 ds1->ds_object, &mintxg) == 0) { 927 int err; 928 929 ASSERT3U(mintxg, ==, dsl_dataset_phys(ds1)->ds_prev_snap_txg); 930 ASSERT3U(mintxg, ==, dsl_dataset_phys(ds2)->ds_prev_snap_txg); 931 VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset, 932 scn->scn_phys.scn_queue_obj, ds1->ds_object, tx)); 933 err = zap_add_int_key(dp->dp_meta_objset, 934 scn->scn_phys.scn_queue_obj, ds2->ds_object, mintxg, tx); 935 VERIFY(err == 0 || err == EEXIST); 936 if (err == EEXIST) { 937 /* Both were there to begin with */ 938 VERIFY(0 == zap_add_int_key(dp->dp_meta_objset, 939 scn->scn_phys.scn_queue_obj, 940 ds1->ds_object, mintxg, tx)); 941 } 942 zfs_dbgmsg("clone_swap ds %llu; in queue; " 943 "replacing with %llu", 944 (u_longlong_t)ds1->ds_object, 945 (u_longlong_t)ds2->ds_object); 946 } else if (zap_lookup_int_key(dp->dp_meta_objset, 947 scn->scn_phys.scn_queue_obj, ds2->ds_object, &mintxg) == 0) { 948 ASSERT3U(mintxg, ==, dsl_dataset_phys(ds1)->ds_prev_snap_txg); 949 ASSERT3U(mintxg, ==, dsl_dataset_phys(ds2)->ds_prev_snap_txg); 950 VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset, 951 scn->scn_phys.scn_queue_obj, ds2->ds_object, tx)); 952 VERIFY(0 == zap_add_int_key(dp->dp_meta_objset, 953 scn->scn_phys.scn_queue_obj, ds1->ds_object, mintxg, tx)); 954 zfs_dbgmsg("clone_swap ds %llu; in queue; " 955 "replacing with %llu", 956 (u_longlong_t)ds2->ds_object, 957 (u_longlong_t)ds1->ds_object); 958 } 959 960 dsl_scan_sync_state(scn, tx); 961 } 962 963 struct enqueue_clones_arg { 964 dmu_tx_t *tx; 965 uint64_t originobj; 966 }; 967 968 /* ARGSUSED */ 969 static int 970 enqueue_clones_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg) 971 { 972 struct enqueue_clones_arg *eca = arg; 973 dsl_dataset_t *ds; 974 int err; 975 dsl_scan_t *scn = dp->dp_scan; 976 977 if (dsl_dir_phys(hds->ds_dir)->dd_origin_obj != eca->originobj) 978 return (0); 979 980 err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds); 981 if (err) 982 return (err); 983 984 while (dsl_dataset_phys(ds)->ds_prev_snap_obj != eca->originobj) { 985 dsl_dataset_t *prev; 986 err = dsl_dataset_hold_obj(dp, 987 dsl_dataset_phys(ds)->ds_prev_snap_obj, FTAG, &prev); 988 989 dsl_dataset_rele(ds, FTAG); 990 if (err) 991 return (err); 992 ds = prev; 993 } 994 VERIFY(zap_add_int_key(dp->dp_meta_objset, 995 scn->scn_phys.scn_queue_obj, ds->ds_object, 996 dsl_dataset_phys(ds)->ds_prev_snap_txg, eca->tx) == 0); 997 dsl_dataset_rele(ds, FTAG); 998 return (0); 999 } 1000 1001 static void 1002 dsl_scan_visitds(dsl_scan_t *scn, uint64_t dsobj, dmu_tx_t *tx) 1003 { 1004 dsl_pool_t *dp = scn->scn_dp; 1005 dsl_dataset_t *ds; 1006 objset_t *os; 1007 1008 VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds)); 1009 1010 if (dmu_objset_from_ds(ds, &os)) 1011 goto out; 1012 1013 /* 1014 * Only the ZIL in the head (non-snapshot) is valid. Even though 1015 * snapshots can have ZIL block pointers (which may be the same 1016 * BP as in the head), they must be ignored. So we traverse the 1017 * ZIL here, rather than in scan_recurse(), because the regular 1018 * snapshot block-sharing rules don't apply to it. 1019 */ 1020 if (DSL_SCAN_IS_SCRUB_RESILVER(scn) && !ds->ds_is_snapshot) 1021 dsl_scan_zil(dp, &os->os_zil_header); 1022 1023 /* 1024 * Iterate over the bps in this ds. 1025 */ 1026 dmu_buf_will_dirty(ds->ds_dbuf, tx); 1027 dsl_scan_visit_rootbp(scn, ds, &dsl_dataset_phys(ds)->ds_bp, tx); 1028 1029 char *dsname = kmem_alloc(ZFS_MAXNAMELEN, KM_SLEEP); 1030 dsl_dataset_name(ds, dsname); 1031 zfs_dbgmsg("scanned dataset %llu (%s) with min=%llu max=%llu; " 1032 "pausing=%u", 1033 (longlong_t)dsobj, dsname, 1034 (longlong_t)scn->scn_phys.scn_cur_min_txg, 1035 (longlong_t)scn->scn_phys.scn_cur_max_txg, 1036 (int)scn->scn_pausing); 1037 kmem_free(dsname, ZFS_MAXNAMELEN); 1038 1039 if (scn->scn_pausing) 1040 goto out; 1041 1042 /* 1043 * We've finished this pass over this dataset. 1044 */ 1045 1046 /* 1047 * If we did not completely visit this dataset, do another pass. 1048 */ 1049 if (scn->scn_phys.scn_flags & DSF_VISIT_DS_AGAIN) { 1050 zfs_dbgmsg("incomplete pass; visiting again"); 1051 scn->scn_phys.scn_flags &= ~DSF_VISIT_DS_AGAIN; 1052 VERIFY(zap_add_int_key(dp->dp_meta_objset, 1053 scn->scn_phys.scn_queue_obj, ds->ds_object, 1054 scn->scn_phys.scn_cur_max_txg, tx) == 0); 1055 goto out; 1056 } 1057 1058 /* 1059 * Add descendent datasets to work queue. 1060 */ 1061 if (dsl_dataset_phys(ds)->ds_next_snap_obj != 0) { 1062 VERIFY(zap_add_int_key(dp->dp_meta_objset, 1063 scn->scn_phys.scn_queue_obj, 1064 dsl_dataset_phys(ds)->ds_next_snap_obj, 1065 dsl_dataset_phys(ds)->ds_creation_txg, tx) == 0); 1066 } 1067 if (dsl_dataset_phys(ds)->ds_num_children > 1) { 1068 boolean_t usenext = B_FALSE; 1069 if (dsl_dataset_phys(ds)->ds_next_clones_obj != 0) { 1070 uint64_t count; 1071 /* 1072 * A bug in a previous version of the code could 1073 * cause upgrade_clones_cb() to not set 1074 * ds_next_snap_obj when it should, leading to a 1075 * missing entry. Therefore we can only use the 1076 * next_clones_obj when its count is correct. 1077 */ 1078 int err = zap_count(dp->dp_meta_objset, 1079 dsl_dataset_phys(ds)->ds_next_clones_obj, &count); 1080 if (err == 0 && 1081 count == dsl_dataset_phys(ds)->ds_num_children - 1) 1082 usenext = B_TRUE; 1083 } 1084 1085 if (usenext) { 1086 VERIFY0(zap_join_key(dp->dp_meta_objset, 1087 dsl_dataset_phys(ds)->ds_next_clones_obj, 1088 scn->scn_phys.scn_queue_obj, 1089 dsl_dataset_phys(ds)->ds_creation_txg, tx)); 1090 } else { 1091 struct enqueue_clones_arg eca; 1092 eca.tx = tx; 1093 eca.originobj = ds->ds_object; 1094 1095 VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj, 1096 enqueue_clones_cb, &eca, DS_FIND_CHILDREN)); 1097 } 1098 } 1099 1100 out: 1101 dsl_dataset_rele(ds, FTAG); 1102 } 1103 1104 /* ARGSUSED */ 1105 static int 1106 enqueue_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg) 1107 { 1108 dmu_tx_t *tx = arg; 1109 dsl_dataset_t *ds; 1110 int err; 1111 dsl_scan_t *scn = dp->dp_scan; 1112 1113 err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds); 1114 if (err) 1115 return (err); 1116 1117 while (dsl_dataset_phys(ds)->ds_prev_snap_obj != 0) { 1118 dsl_dataset_t *prev; 1119 err = dsl_dataset_hold_obj(dp, 1120 dsl_dataset_phys(ds)->ds_prev_snap_obj, FTAG, &prev); 1121 if (err) { 1122 dsl_dataset_rele(ds, FTAG); 1123 return (err); 1124 } 1125 1126 /* 1127 * If this is a clone, we don't need to worry about it for now. 1128 */ 1129 if (dsl_dataset_phys(prev)->ds_next_snap_obj != ds->ds_object) { 1130 dsl_dataset_rele(ds, FTAG); 1131 dsl_dataset_rele(prev, FTAG); 1132 return (0); 1133 } 1134 dsl_dataset_rele(ds, FTAG); 1135 ds = prev; 1136 } 1137 1138 VERIFY(zap_add_int_key(dp->dp_meta_objset, scn->scn_phys.scn_queue_obj, 1139 ds->ds_object, dsl_dataset_phys(ds)->ds_prev_snap_txg, tx) == 0); 1140 dsl_dataset_rele(ds, FTAG); 1141 return (0); 1142 } 1143 1144 /* 1145 * Scrub/dedup interaction. 1146 * 1147 * If there are N references to a deduped block, we don't want to scrub it 1148 * N times -- ideally, we should scrub it exactly once. 1149 * 1150 * We leverage the fact that the dde's replication class (enum ddt_class) 1151 * is ordered from highest replication class (DDT_CLASS_DITTO) to lowest 1152 * (DDT_CLASS_UNIQUE) so that we may walk the DDT in that order. 1153 * 1154 * To prevent excess scrubbing, the scrub begins by walking the DDT 1155 * to find all blocks with refcnt > 1, and scrubs each of these once. 1156 * Since there are two replication classes which contain blocks with 1157 * refcnt > 1, we scrub the highest replication class (DDT_CLASS_DITTO) first. 1158 * Finally the top-down scrub begins, only visiting blocks with refcnt == 1. 1159 * 1160 * There would be nothing more to say if a block's refcnt couldn't change 1161 * during a scrub, but of course it can so we must account for changes 1162 * in a block's replication class. 1163 * 1164 * Here's an example of what can occur: 1165 * 1166 * If a block has refcnt > 1 during the DDT scrub phase, but has refcnt == 1 1167 * when visited during the top-down scrub phase, it will be scrubbed twice. 1168 * This negates our scrub optimization, but is otherwise harmless. 1169 * 1170 * If a block has refcnt == 1 during the DDT scrub phase, but has refcnt > 1 1171 * on each visit during the top-down scrub phase, it will never be scrubbed. 1172 * To catch this, ddt_sync_entry() notifies the scrub code whenever a block's 1173 * reference class transitions to a higher level (i.e DDT_CLASS_UNIQUE to 1174 * DDT_CLASS_DUPLICATE); if it transitions from refcnt == 1 to refcnt > 1 1175 * while a scrub is in progress, it scrubs the block right then. 1176 */ 1177 static void 1178 dsl_scan_ddt(dsl_scan_t *scn, dmu_tx_t *tx) 1179 { 1180 ddt_bookmark_t *ddb = &scn->scn_phys.scn_ddt_bookmark; 1181 ddt_entry_t dde = { 0 }; 1182 int error; 1183 uint64_t n = 0; 1184 1185 while ((error = ddt_walk(scn->scn_dp->dp_spa, ddb, &dde)) == 0) { 1186 ddt_t *ddt; 1187 1188 if (ddb->ddb_class > scn->scn_phys.scn_ddt_class_max) 1189 break; 1190 dprintf("visiting ddb=%llu/%llu/%llu/%llx\n", 1191 (longlong_t)ddb->ddb_class, 1192 (longlong_t)ddb->ddb_type, 1193 (longlong_t)ddb->ddb_checksum, 1194 (longlong_t)ddb->ddb_cursor); 1195 1196 /* There should be no pending changes to the dedup table */ 1197 ddt = scn->scn_dp->dp_spa->spa_ddt[ddb->ddb_checksum]; 1198 ASSERT(avl_first(&ddt->ddt_tree) == NULL); 1199 1200 dsl_scan_ddt_entry(scn, ddb->ddb_checksum, &dde, tx); 1201 n++; 1202 1203 if (dsl_scan_check_pause(scn, NULL)) 1204 break; 1205 } 1206 1207 zfs_dbgmsg("scanned %llu ddt entries with class_max = %u; pausing=%u", 1208 (longlong_t)n, (int)scn->scn_phys.scn_ddt_class_max, 1209 (int)scn->scn_pausing); 1210 1211 ASSERT(error == 0 || error == ENOENT); 1212 ASSERT(error != ENOENT || 1213 ddb->ddb_class > scn->scn_phys.scn_ddt_class_max); 1214 } 1215 1216 /* ARGSUSED */ 1217 void 1218 dsl_scan_ddt_entry(dsl_scan_t *scn, enum zio_checksum checksum, 1219 ddt_entry_t *dde, dmu_tx_t *tx) 1220 { 1221 const ddt_key_t *ddk = &dde->dde_key; 1222 ddt_phys_t *ddp = dde->dde_phys; 1223 blkptr_t bp; 1224 zbookmark_phys_t zb = { 0 }; 1225 1226 if (scn->scn_phys.scn_state != DSS_SCANNING) 1227 return; 1228 1229 for (int p = 0; p < DDT_PHYS_TYPES; p++, ddp++) { 1230 if (ddp->ddp_phys_birth == 0 || 1231 ddp->ddp_phys_birth > scn->scn_phys.scn_max_txg) 1232 continue; 1233 ddt_bp_create(checksum, ddk, ddp, &bp); 1234 1235 scn->scn_visited_this_txg++; 1236 scan_funcs[scn->scn_phys.scn_func](scn->scn_dp, &bp, &zb); 1237 } 1238 } 1239 1240 static void 1241 dsl_scan_visit(dsl_scan_t *scn, dmu_tx_t *tx) 1242 { 1243 dsl_pool_t *dp = scn->scn_dp; 1244 zap_cursor_t zc; 1245 zap_attribute_t za; 1246 1247 if (scn->scn_phys.scn_ddt_bookmark.ddb_class <= 1248 scn->scn_phys.scn_ddt_class_max) { 1249 scn->scn_phys.scn_cur_min_txg = scn->scn_phys.scn_min_txg; 1250 scn->scn_phys.scn_cur_max_txg = scn->scn_phys.scn_max_txg; 1251 dsl_scan_ddt(scn, tx); 1252 if (scn->scn_pausing) 1253 return; 1254 } 1255 1256 if (scn->scn_phys.scn_bookmark.zb_objset == DMU_META_OBJSET) { 1257 /* First do the MOS & ORIGIN */ 1258 1259 scn->scn_phys.scn_cur_min_txg = scn->scn_phys.scn_min_txg; 1260 scn->scn_phys.scn_cur_max_txg = scn->scn_phys.scn_max_txg; 1261 dsl_scan_visit_rootbp(scn, NULL, 1262 &dp->dp_meta_rootbp, tx); 1263 spa_set_rootblkptr(dp->dp_spa, &dp->dp_meta_rootbp); 1264 if (scn->scn_pausing) 1265 return; 1266 1267 if (spa_version(dp->dp_spa) < SPA_VERSION_DSL_SCRUB) { 1268 VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj, 1269 enqueue_cb, tx, DS_FIND_CHILDREN)); 1270 } else { 1271 dsl_scan_visitds(scn, 1272 dp->dp_origin_snap->ds_object, tx); 1273 } 1274 ASSERT(!scn->scn_pausing); 1275 } else if (scn->scn_phys.scn_bookmark.zb_objset != 1276 ZB_DESTROYED_OBJSET) { 1277 /* 1278 * If we were paused, continue from here. Note if the 1279 * ds we were paused on was deleted, the zb_objset may 1280 * be -1, so we will skip this and find a new objset 1281 * below. 1282 */ 1283 dsl_scan_visitds(scn, scn->scn_phys.scn_bookmark.zb_objset, tx); 1284 if (scn->scn_pausing) 1285 return; 1286 } 1287 1288 /* 1289 * In case we were paused right at the end of the ds, zero the 1290 * bookmark so we don't think that we're still trying to resume. 1291 */ 1292 bzero(&scn->scn_phys.scn_bookmark, sizeof (zbookmark_phys_t)); 1293 1294 /* keep pulling things out of the zap-object-as-queue */ 1295 while (zap_cursor_init(&zc, dp->dp_meta_objset, 1296 scn->scn_phys.scn_queue_obj), 1297 zap_cursor_retrieve(&zc, &za) == 0) { 1298 dsl_dataset_t *ds; 1299 uint64_t dsobj; 1300 1301 dsobj = strtonum(za.za_name, NULL); 1302 VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset, 1303 scn->scn_phys.scn_queue_obj, dsobj, tx)); 1304 1305 /* Set up min/max txg */ 1306 VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds)); 1307 if (za.za_first_integer != 0) { 1308 scn->scn_phys.scn_cur_min_txg = 1309 MAX(scn->scn_phys.scn_min_txg, 1310 za.za_first_integer); 1311 } else { 1312 scn->scn_phys.scn_cur_min_txg = 1313 MAX(scn->scn_phys.scn_min_txg, 1314 dsl_dataset_phys(ds)->ds_prev_snap_txg); 1315 } 1316 scn->scn_phys.scn_cur_max_txg = dsl_scan_ds_maxtxg(ds); 1317 dsl_dataset_rele(ds, FTAG); 1318 1319 dsl_scan_visitds(scn, dsobj, tx); 1320 zap_cursor_fini(&zc); 1321 if (scn->scn_pausing) 1322 return; 1323 } 1324 zap_cursor_fini(&zc); 1325 } 1326 1327 static boolean_t 1328 dsl_scan_free_should_pause(dsl_scan_t *scn) 1329 { 1330 uint64_t elapsed_nanosecs; 1331 1332 if (zfs_recover) 1333 return (B_FALSE); 1334 1335 if (scn->scn_visited_this_txg >= zfs_free_max_blocks) 1336 return (B_TRUE); 1337 1338 elapsed_nanosecs = gethrtime() - scn->scn_sync_start_time; 1339 return (elapsed_nanosecs / NANOSEC > zfs_txg_timeout || 1340 (NSEC2MSEC(elapsed_nanosecs) > zfs_free_min_time_ms && 1341 txg_sync_waiting(scn->scn_dp)) || 1342 spa_shutting_down(scn->scn_dp->dp_spa)); 1343 } 1344 1345 static int 1346 dsl_scan_free_block_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx) 1347 { 1348 dsl_scan_t *scn = arg; 1349 1350 if (!scn->scn_is_bptree || 1351 (BP_GET_LEVEL(bp) == 0 && BP_GET_TYPE(bp) != DMU_OT_OBJSET)) { 1352 if (dsl_scan_free_should_pause(scn)) 1353 return (SET_ERROR(ERESTART)); 1354 } 1355 1356 zio_nowait(zio_free_sync(scn->scn_zio_root, scn->scn_dp->dp_spa, 1357 dmu_tx_get_txg(tx), bp, 0)); 1358 dsl_dir_diduse_space(tx->tx_pool->dp_free_dir, DD_USED_HEAD, 1359 -bp_get_dsize_sync(scn->scn_dp->dp_spa, bp), 1360 -BP_GET_PSIZE(bp), -BP_GET_UCSIZE(bp), tx); 1361 scn->scn_visited_this_txg++; 1362 return (0); 1363 } 1364 1365 boolean_t 1366 dsl_scan_active(dsl_scan_t *scn) 1367 { 1368 spa_t *spa = scn->scn_dp->dp_spa; 1369 uint64_t used = 0, comp, uncomp; 1370 1371 if (spa->spa_load_state != SPA_LOAD_NONE) 1372 return (B_FALSE); 1373 if (spa_shutting_down(spa)) 1374 return (B_FALSE); 1375 if (scn->scn_phys.scn_state == DSS_SCANNING || 1376 (scn->scn_async_destroying && !scn->scn_async_stalled)) 1377 return (B_TRUE); 1378 1379 if (spa_version(scn->scn_dp->dp_spa) >= SPA_VERSION_DEADLISTS) { 1380 (void) bpobj_space(&scn->scn_dp->dp_free_bpobj, 1381 &used, &comp, &uncomp); 1382 } 1383 return (used != 0); 1384 } 1385 1386 void 1387 dsl_scan_sync(dsl_pool_t *dp, dmu_tx_t *tx) 1388 { 1389 dsl_scan_t *scn = dp->dp_scan; 1390 spa_t *spa = dp->dp_spa; 1391 int err = 0; 1392 1393 /* 1394 * Check for scn_restart_txg before checking spa_load_state, so 1395 * that we can restart an old-style scan while the pool is being 1396 * imported (see dsl_scan_init). 1397 */ 1398 if (scn->scn_restart_txg != 0 && 1399 scn->scn_restart_txg <= tx->tx_txg) { 1400 pool_scan_func_t func = POOL_SCAN_SCRUB; 1401 dsl_scan_done(scn, B_FALSE, tx); 1402 if (vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL)) 1403 func = POOL_SCAN_RESILVER; 1404 zfs_dbgmsg("restarting scan func=%u txg=%llu", 1405 func, tx->tx_txg); 1406 dsl_scan_setup_sync(&func, tx); 1407 } 1408 1409 /* 1410 * If the scan is inactive due to a stalled async destroy, try again. 1411 */ 1412 if ((!scn->scn_async_stalled && !dsl_scan_active(scn)) || 1413 spa_sync_pass(dp->dp_spa) > 1) 1414 return; 1415 1416 scn->scn_visited_this_txg = 0; 1417 scn->scn_pausing = B_FALSE; 1418 scn->scn_sync_start_time = gethrtime(); 1419 spa->spa_scrub_active = B_TRUE; 1420 1421 /* 1422 * First process the async destroys. If we pause, don't do 1423 * any scrubbing or resilvering. This ensures that there are no 1424 * async destroys while we are scanning, so the scan code doesn't 1425 * have to worry about traversing it. It is also faster to free the 1426 * blocks than to scrub them. 1427 */ 1428 if (spa_version(dp->dp_spa) >= SPA_VERSION_DEADLISTS) { 1429 scn->scn_is_bptree = B_FALSE; 1430 scn->scn_zio_root = zio_root(dp->dp_spa, NULL, 1431 NULL, ZIO_FLAG_MUSTSUCCEED); 1432 err = bpobj_iterate(&dp->dp_free_bpobj, 1433 dsl_scan_free_block_cb, scn, tx); 1434 VERIFY3U(0, ==, zio_wait(scn->scn_zio_root)); 1435 1436 if (err != 0 && err != ERESTART) 1437 zfs_panic_recover("error %u from bpobj_iterate()", err); 1438 } 1439 1440 if (err == 0 && spa_feature_is_active(spa, SPA_FEATURE_ASYNC_DESTROY)) { 1441 ASSERT(scn->scn_async_destroying); 1442 scn->scn_is_bptree = B_TRUE; 1443 scn->scn_zio_root = zio_root(dp->dp_spa, NULL, 1444 NULL, ZIO_FLAG_MUSTSUCCEED); 1445 err = bptree_iterate(dp->dp_meta_objset, 1446 dp->dp_bptree_obj, B_TRUE, dsl_scan_free_block_cb, scn, tx); 1447 VERIFY0(zio_wait(scn->scn_zio_root)); 1448 1449 if (err == EIO || err == ECKSUM) { 1450 err = 0; 1451 } else if (err != 0 && err != ERESTART) { 1452 zfs_panic_recover("error %u from " 1453 "traverse_dataset_destroyed()", err); 1454 } 1455 1456 if (bptree_is_empty(dp->dp_meta_objset, dp->dp_bptree_obj)) { 1457 /* finished; deactivate async destroy feature */ 1458 spa_feature_decr(spa, SPA_FEATURE_ASYNC_DESTROY, tx); 1459 ASSERT(!spa_feature_is_active(spa, 1460 SPA_FEATURE_ASYNC_DESTROY)); 1461 VERIFY0(zap_remove(dp->dp_meta_objset, 1462 DMU_POOL_DIRECTORY_OBJECT, 1463 DMU_POOL_BPTREE_OBJ, tx)); 1464 VERIFY0(bptree_free(dp->dp_meta_objset, 1465 dp->dp_bptree_obj, tx)); 1466 dp->dp_bptree_obj = 0; 1467 scn->scn_async_destroying = B_FALSE; 1468 scn->scn_async_stalled = B_FALSE; 1469 } else { 1470 /* 1471 * If we didn't make progress, mark the async 1472 * destroy as stalled, so that we will not initiate 1473 * a spa_sync() on its behalf. Note that we only 1474 * check this if we are not finished, because if the 1475 * bptree had no blocks for us to visit, we can 1476 * finish without "making progress". 1477 */ 1478 scn->scn_async_stalled = 1479 (scn->scn_visited_this_txg == 0); 1480 } 1481 } 1482 if (scn->scn_visited_this_txg) { 1483 zfs_dbgmsg("freed %llu blocks in %llums from " 1484 "free_bpobj/bptree txg %llu; err=%u", 1485 (longlong_t)scn->scn_visited_this_txg, 1486 (longlong_t) 1487 NSEC2MSEC(gethrtime() - scn->scn_sync_start_time), 1488 (longlong_t)tx->tx_txg, err); 1489 scn->scn_visited_this_txg = 0; 1490 1491 /* 1492 * Write out changes to the DDT that may be required as a 1493 * result of the blocks freed. This ensures that the DDT 1494 * is clean when a scrub/resilver runs. 1495 */ 1496 ddt_sync(spa, tx->tx_txg); 1497 } 1498 if (err != 0) 1499 return; 1500 if (!scn->scn_async_destroying && zfs_free_leak_on_eio && 1501 (dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes != 0 || 1502 dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes != 0 || 1503 dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes != 0)) { 1504 /* 1505 * We have finished background destroying, but there is still 1506 * some space left in the dp_free_dir. Transfer this leaked 1507 * space to the dp_leak_dir. 1508 */ 1509 if (dp->dp_leak_dir == NULL) { 1510 rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); 1511 (void) dsl_dir_create_sync(dp, dp->dp_root_dir, 1512 LEAK_DIR_NAME, tx); 1513 VERIFY0(dsl_pool_open_special_dir(dp, 1514 LEAK_DIR_NAME, &dp->dp_leak_dir)); 1515 rrw_exit(&dp->dp_config_rwlock, FTAG); 1516 } 1517 dsl_dir_diduse_space(dp->dp_leak_dir, DD_USED_HEAD, 1518 dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes, 1519 dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes, 1520 dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes, tx); 1521 dsl_dir_diduse_space(dp->dp_free_dir, DD_USED_HEAD, 1522 -dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes, 1523 -dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes, 1524 -dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes, tx); 1525 } 1526 if (!scn->scn_async_destroying) { 1527 /* finished; verify that space accounting went to zero */ 1528 ASSERT0(dsl_dir_phys(dp->dp_free_dir)->dd_used_bytes); 1529 ASSERT0(dsl_dir_phys(dp->dp_free_dir)->dd_compressed_bytes); 1530 ASSERT0(dsl_dir_phys(dp->dp_free_dir)->dd_uncompressed_bytes); 1531 } 1532 1533 if (scn->scn_phys.scn_state != DSS_SCANNING) 1534 return; 1535 1536 if (scn->scn_done_txg == tx->tx_txg) { 1537 ASSERT(!scn->scn_pausing); 1538 /* finished with scan. */ 1539 zfs_dbgmsg("txg %llu scan complete", tx->tx_txg); 1540 dsl_scan_done(scn, B_TRUE, tx); 1541 ASSERT3U(spa->spa_scrub_inflight, ==, 0); 1542 dsl_scan_sync_state(scn, tx); 1543 return; 1544 } 1545 1546 if (scn->scn_phys.scn_ddt_bookmark.ddb_class <= 1547 scn->scn_phys.scn_ddt_class_max) { 1548 zfs_dbgmsg("doing scan sync txg %llu; " 1549 "ddt bm=%llu/%llu/%llu/%llx", 1550 (longlong_t)tx->tx_txg, 1551 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_class, 1552 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_type, 1553 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_checksum, 1554 (longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_cursor); 1555 ASSERT(scn->scn_phys.scn_bookmark.zb_objset == 0); 1556 ASSERT(scn->scn_phys.scn_bookmark.zb_object == 0); 1557 ASSERT(scn->scn_phys.scn_bookmark.zb_level == 0); 1558 ASSERT(scn->scn_phys.scn_bookmark.zb_blkid == 0); 1559 } else { 1560 zfs_dbgmsg("doing scan sync txg %llu; bm=%llu/%llu/%llu/%llu", 1561 (longlong_t)tx->tx_txg, 1562 (longlong_t)scn->scn_phys.scn_bookmark.zb_objset, 1563 (longlong_t)scn->scn_phys.scn_bookmark.zb_object, 1564 (longlong_t)scn->scn_phys.scn_bookmark.zb_level, 1565 (longlong_t)scn->scn_phys.scn_bookmark.zb_blkid); 1566 } 1567 1568 scn->scn_zio_root = zio_root(dp->dp_spa, NULL, 1569 NULL, ZIO_FLAG_CANFAIL); 1570 dsl_pool_config_enter(dp, FTAG); 1571 dsl_scan_visit(scn, tx); 1572 dsl_pool_config_exit(dp, FTAG); 1573 (void) zio_wait(scn->scn_zio_root); 1574 scn->scn_zio_root = NULL; 1575 1576 zfs_dbgmsg("visited %llu blocks in %llums", 1577 (longlong_t)scn->scn_visited_this_txg, 1578 (longlong_t)NSEC2MSEC(gethrtime() - scn->scn_sync_start_time)); 1579 1580 if (!scn->scn_pausing) { 1581 scn->scn_done_txg = tx->tx_txg + 1; 1582 zfs_dbgmsg("txg %llu traversal complete, waiting till txg %llu", 1583 tx->tx_txg, scn->scn_done_txg); 1584 } 1585 1586 if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) { 1587 mutex_enter(&spa->spa_scrub_lock); 1588 while (spa->spa_scrub_inflight > 0) { 1589 cv_wait(&spa->spa_scrub_io_cv, 1590 &spa->spa_scrub_lock); 1591 } 1592 mutex_exit(&spa->spa_scrub_lock); 1593 } 1594 1595 dsl_scan_sync_state(scn, tx); 1596 } 1597 1598 /* 1599 * This will start a new scan, or restart an existing one. 1600 */ 1601 void 1602 dsl_resilver_restart(dsl_pool_t *dp, uint64_t txg) 1603 { 1604 if (txg == 0) { 1605 dmu_tx_t *tx; 1606 tx = dmu_tx_create_dd(dp->dp_mos_dir); 1607 VERIFY(0 == dmu_tx_assign(tx, TXG_WAIT)); 1608 1609 txg = dmu_tx_get_txg(tx); 1610 dp->dp_scan->scn_restart_txg = txg; 1611 dmu_tx_commit(tx); 1612 } else { 1613 dp->dp_scan->scn_restart_txg = txg; 1614 } 1615 zfs_dbgmsg("restarting resilver txg=%llu", txg); 1616 } 1617 1618 boolean_t 1619 dsl_scan_resilvering(dsl_pool_t *dp) 1620 { 1621 return (dp->dp_scan->scn_phys.scn_state == DSS_SCANNING && 1622 dp->dp_scan->scn_phys.scn_func == POOL_SCAN_RESILVER); 1623 } 1624 1625 /* 1626 * scrub consumers 1627 */ 1628 1629 static void 1630 count_block(zfs_all_blkstats_t *zab, const blkptr_t *bp) 1631 { 1632 int i; 1633 1634 /* 1635 * If we resume after a reboot, zab will be NULL; don't record 1636 * incomplete stats in that case. 1637 */ 1638 if (zab == NULL) 1639 return; 1640 1641 for (i = 0; i < 4; i++) { 1642 int l = (i < 2) ? BP_GET_LEVEL(bp) : DN_MAX_LEVELS; 1643 int t = (i & 1) ? BP_GET_TYPE(bp) : DMU_OT_TOTAL; 1644 if (t & DMU_OT_NEWTYPE) 1645 t = DMU_OT_OTHER; 1646 zfs_blkstat_t *zb = &zab->zab_type[l][t]; 1647 int equal; 1648 1649 zb->zb_count++; 1650 zb->zb_asize += BP_GET_ASIZE(bp); 1651 zb->zb_lsize += BP_GET_LSIZE(bp); 1652 zb->zb_psize += BP_GET_PSIZE(bp); 1653 zb->zb_gangs += BP_COUNT_GANG(bp); 1654 1655 switch (BP_GET_NDVAS(bp)) { 1656 case 2: 1657 if (DVA_GET_VDEV(&bp->blk_dva[0]) == 1658 DVA_GET_VDEV(&bp->blk_dva[1])) 1659 zb->zb_ditto_2_of_2_samevdev++; 1660 break; 1661 case 3: 1662 equal = (DVA_GET_VDEV(&bp->blk_dva[0]) == 1663 DVA_GET_VDEV(&bp->blk_dva[1])) + 1664 (DVA_GET_VDEV(&bp->blk_dva[0]) == 1665 DVA_GET_VDEV(&bp->blk_dva[2])) + 1666 (DVA_GET_VDEV(&bp->blk_dva[1]) == 1667 DVA_GET_VDEV(&bp->blk_dva[2])); 1668 if (equal == 1) 1669 zb->zb_ditto_2_of_3_samevdev++; 1670 else if (equal == 3) 1671 zb->zb_ditto_3_of_3_samevdev++; 1672 break; 1673 } 1674 } 1675 } 1676 1677 static void 1678 dsl_scan_scrub_done(zio_t *zio) 1679 { 1680 spa_t *spa = zio->io_spa; 1681 1682 zio_data_buf_free(zio->io_data, zio->io_size); 1683 1684 mutex_enter(&spa->spa_scrub_lock); 1685 spa->spa_scrub_inflight--; 1686 cv_broadcast(&spa->spa_scrub_io_cv); 1687 1688 if (zio->io_error && (zio->io_error != ECKSUM || 1689 !(zio->io_flags & ZIO_FLAG_SPECULATIVE))) { 1690 spa->spa_dsl_pool->dp_scan->scn_phys.scn_errors++; 1691 } 1692 mutex_exit(&spa->spa_scrub_lock); 1693 } 1694 1695 static int 1696 dsl_scan_scrub_cb(dsl_pool_t *dp, 1697 const blkptr_t *bp, const zbookmark_phys_t *zb) 1698 { 1699 dsl_scan_t *scn = dp->dp_scan; 1700 size_t size = BP_GET_PSIZE(bp); 1701 spa_t *spa = dp->dp_spa; 1702 uint64_t phys_birth = BP_PHYSICAL_BIRTH(bp); 1703 boolean_t needs_io; 1704 int zio_flags = ZIO_FLAG_SCAN_THREAD | ZIO_FLAG_RAW | ZIO_FLAG_CANFAIL; 1705 int scan_delay = 0; 1706 1707 if (phys_birth <= scn->scn_phys.scn_min_txg || 1708 phys_birth >= scn->scn_phys.scn_max_txg) 1709 return (0); 1710 1711 count_block(dp->dp_blkstats, bp); 1712 1713 if (BP_IS_EMBEDDED(bp)) 1714 return (0); 1715 1716 ASSERT(DSL_SCAN_IS_SCRUB_RESILVER(scn)); 1717 if (scn->scn_phys.scn_func == POOL_SCAN_SCRUB) { 1718 zio_flags |= ZIO_FLAG_SCRUB; 1719 needs_io = B_TRUE; 1720 scan_delay = zfs_scrub_delay; 1721 } else { 1722 ASSERT3U(scn->scn_phys.scn_func, ==, POOL_SCAN_RESILVER); 1723 zio_flags |= ZIO_FLAG_RESILVER; 1724 needs_io = B_FALSE; 1725 scan_delay = zfs_resilver_delay; 1726 } 1727 1728 /* If it's an intent log block, failure is expected. */ 1729 if (zb->zb_level == ZB_ZIL_LEVEL) 1730 zio_flags |= ZIO_FLAG_SPECULATIVE; 1731 1732 for (int d = 0; d < BP_GET_NDVAS(bp); d++) { 1733 vdev_t *vd = vdev_lookup_top(spa, 1734 DVA_GET_VDEV(&bp->blk_dva[d])); 1735 1736 /* 1737 * Keep track of how much data we've examined so that 1738 * zpool(1M) status can make useful progress reports. 1739 */ 1740 scn->scn_phys.scn_examined += DVA_GET_ASIZE(&bp->blk_dva[d]); 1741 spa->spa_scan_pass_exam += DVA_GET_ASIZE(&bp->blk_dva[d]); 1742 1743 /* if it's a resilver, this may not be in the target range */ 1744 if (!needs_io) { 1745 if (DVA_GET_GANG(&bp->blk_dva[d])) { 1746 /* 1747 * Gang members may be spread across multiple 1748 * vdevs, so the best estimate we have is the 1749 * scrub range, which has already been checked. 1750 * XXX -- it would be better to change our 1751 * allocation policy to ensure that all 1752 * gang members reside on the same vdev. 1753 */ 1754 needs_io = B_TRUE; 1755 } else { 1756 needs_io = vdev_dtl_contains(vd, DTL_PARTIAL, 1757 phys_birth, 1); 1758 } 1759 } 1760 } 1761 1762 if (needs_io && !zfs_no_scrub_io) { 1763 vdev_t *rvd = spa->spa_root_vdev; 1764 uint64_t maxinflight = rvd->vdev_children * zfs_top_maxinflight; 1765 void *data = zio_data_buf_alloc(size); 1766 1767 mutex_enter(&spa->spa_scrub_lock); 1768 while (spa->spa_scrub_inflight >= maxinflight) 1769 cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock); 1770 spa->spa_scrub_inflight++; 1771 mutex_exit(&spa->spa_scrub_lock); 1772 1773 /* 1774 * If we're seeing recent (zfs_scan_idle) "important" I/Os 1775 * then throttle our workload to limit the impact of a scan. 1776 */ 1777 if (ddi_get_lbolt64() - spa->spa_last_io <= zfs_scan_idle) 1778 delay(scan_delay); 1779 1780 zio_nowait(zio_read(NULL, spa, bp, data, size, 1781 dsl_scan_scrub_done, NULL, ZIO_PRIORITY_SCRUB, 1782 zio_flags, zb)); 1783 } 1784 1785 /* do not relocate this block */ 1786 return (0); 1787 } 1788 1789 int 1790 dsl_scan(dsl_pool_t *dp, pool_scan_func_t func) 1791 { 1792 spa_t *spa = dp->dp_spa; 1793 1794 /* 1795 * Purge all vdev caches and probe all devices. We do this here 1796 * rather than in sync context because this requires a writer lock 1797 * on the spa_config lock, which we can't do from sync context. The 1798 * spa_scrub_reopen flag indicates that vdev_open() should not 1799 * attempt to start another scrub. 1800 */ 1801 spa_vdev_state_enter(spa, SCL_NONE); 1802 spa->spa_scrub_reopen = B_TRUE; 1803 vdev_reopen(spa->spa_root_vdev); 1804 spa->spa_scrub_reopen = B_FALSE; 1805 (void) spa_vdev_state_exit(spa, NULL, 0); 1806 1807 return (dsl_sync_task(spa_name(spa), dsl_scan_setup_check, 1808 dsl_scan_setup_sync, &func, 0, ZFS_SPACE_CHECK_NONE)); 1809 } 1810