1#!/bin/ksh -p 2# 3# CDDL HEADER START 4# 5# The contents of this file are subject to the terms of the 6# Common Development and Distribution License (the "License"). 7# You may not use this file except in compliance with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22 23# 24# Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved. 25# Copyright 2008, 2010, Richard Lowe 26# Copyright 2011 Nexenta Systems, Inc. All rights reserved. 27# Copyright 2012 Joshua M. Clulow <josh@sysmgr.org> 28# 29# Based on the nightly script from the integration folks, 30# Mostly modified and owned by mike_s. 31# Changes also by kjc, dmk. 32# 33# BRINGOVER_WS may be specified in the env file. 34# The default is the old behavior of CLONE_WS 35# 36# -i on the command line, means fast options, so when it's on the 37# command line (only), lint and check builds are skipped no matter what 38# the setting of their individual flags are in NIGHTLY_OPTIONS. 39# 40# LINTDIRS can be set in the env file, format is a list of: 41# 42# /dirname-to-run-lint-on flag 43# 44# Where flag is: y - enable lint noise diff output 45# n - disable lint noise diff output 46# 47# For example: LINTDIRS="$SRC/uts n $SRC/stand y $SRC/psm y" 48# 49# OPTHOME may be set in the environment to override /opt 50# 51 52# 53# The CDPATH variable causes ksh's `cd' builtin to emit messages to stdout 54# under certain circumstances, which can really screw things up; unset it. 55# 56unset CDPATH 57 58# Get the absolute path of the nightly script that the user invoked. This 59# may be a relative path, and we need to do this before changing directory. 60nightly_path=`whence $0` 61 62# 63# Keep track of where we found nightly so we can invoke the matching 64# which_scm script. If that doesn't work, don't go guessing, just rely 65# on the $PATH settings, which will generally give us either /opt/onbld 66# or the user's workspace. 67# 68WHICH_SCM=$(dirname $nightly_path)/which_scm 69if [[ ! -x $WHICH_SCM ]]; then 70 WHICH_SCM=which_scm 71fi 72 73function fatal_error 74{ 75 print -u2 "nightly: $*" 76 exit 1 77} 78 79# 80# Function to do a DEBUG and non-DEBUG build. Needed because we might 81# need to do another for the source build, and since we only deliver DEBUG or 82# non-DEBUG packages. 83# 84# usage: normal_build 85# 86function normal_build { 87 88 typeset orig_p_FLAG="$p_FLAG" 89 typeset crypto_signer="$CODESIGN_USER" 90 91 suffix="" 92 93 # non-DEBUG build begins 94 95 if [ "$F_FLAG" = "n" ]; then 96 set_non_debug_build_flags 97 CODESIGN_USER="$crypto_signer" \ 98 build "non-DEBUG" "$suffix-nd" "-nd" "$MULTI_PROTO" 99 else 100 echo "\n==== No non-DEBUG $open_only build ====\n" >> "$LOGFILE" 101 fi 102 103 # non-DEBUG build ends 104 105 # DEBUG build begins 106 107 if [ "$D_FLAG" = "y" ]; then 108 set_debug_build_flags 109 CODESIGN_USER="$crypto_signer" \ 110 build "DEBUG" "$suffix" "" "$MULTI_PROTO" 111 else 112 echo "\n==== No DEBUG $open_only build ====\n" >> "$LOGFILE" 113 fi 114 115 # DEBUG build ends 116 117 p_FLAG="$orig_p_FLAG" 118} 119 120# 121# usage: run_hook HOOKNAME ARGS... 122# 123# If variable "$HOOKNAME" is defined, insert a section header into 124# our logs and then run the command with ARGS 125# 126function run_hook { 127 HOOKNAME=$1 128 eval HOOKCMD=\$$HOOKNAME 129 shift 130 131 if [ -n "$HOOKCMD" ]; then 132 ( 133 echo "\n==== Running $HOOKNAME command: $HOOKCMD ====\n" 134 ( $HOOKCMD "$@" 2>&1 ) 135 if [ "$?" -ne 0 ]; then 136 # Let exit status propagate up 137 touch $TMPDIR/abort 138 fi 139 ) | tee -a $mail_msg_file >> $LOGFILE 140 141 if [ -f $TMPDIR/abort ]; then 142 build_ok=n 143 echo "\nAborting at request of $HOOKNAME" | 144 tee -a $mail_msg_file >> $LOGFILE 145 exit 1 146 fi 147 fi 148} 149 150# Return library search directive as function of given root. 151function myldlibs { 152 echo "-L$1/lib -L$1/usr/lib" 153} 154 155# Return header search directive as function of given root. 156function myheaders { 157 echo "-I$1/usr/include" 158} 159 160# 161# Function to do the build, including package generation. 162# usage: build LABEL SUFFIX ND MULTIPROTO 163# - LABEL is used to tag build output. 164# - SUFFIX is used to distinguish files (e.g., DEBUG vs non-DEBUG, 165# open-only vs full tree). 166# - ND is "-nd" (non-DEBUG builds) or "" (DEBUG builds). 167# - If MULTIPROTO is "yes", it means to name the proto area according to 168# SUFFIX. Otherwise ("no"), (re)use the standard proto area. 169# 170function build { 171 LABEL=$1 172 SUFFIX=$2 173 ND=$3 174 MULTIPROTO=$4 175 INSTALLOG=install${SUFFIX}-${MACH} 176 NOISE=noise${SUFFIX}-${MACH} 177 PKGARCHIVE=${PKGARCHIVE_ORIG}${SUFFIX} 178 179 ORIGROOT=$ROOT 180 [ $MULTIPROTO = no ] || export ROOT=$ROOT$SUFFIX 181 182 export ENVLDLIBS1=`myldlibs $ROOT` 183 export ENVCPPFLAGS1=`myheaders $ROOT` 184 185 this_build_ok=y 186 # 187 # Build OS-Networking source 188 # 189 echo "\n==== Building OS-Net source at `date` ($LABEL) ====\n" \ 190 >> $LOGFILE 191 192 rm -f $SRC/${INSTALLOG}.out 193 cd $SRC 194 /bin/time $MAKE -e install 2>&1 | \ 195 tee -a $SRC/${INSTALLOG}.out >> $LOGFILE 196 197 echo "\n==== Build errors ($LABEL) ====\n" >> $mail_msg_file 198 egrep ":" $SRC/${INSTALLOG}.out | 199 egrep -e "(^${MAKE}:|[ ]error[: \n])" | \ 200 egrep -v "Ignoring unknown host" | \ 201 egrep -v "cc .* -o error " | \ 202 egrep -v "warning" | tee $TMPDIR/build_errs${SUFFIX} \ 203 >> $mail_msg_file 204 if [[ -s $TMPDIR/build_errs${SUFFIX} ]]; then 205 build_ok=n 206 this_build_ok=n 207 fi 208 grep "bootblock image is .* bytes too big" $SRC/${INSTALLOG}.out \ 209 >> $mail_msg_file 210 if [ "$?" = "0" ]; then 211 build_ok=n 212 this_build_ok=n 213 fi 214 215 echo "\n==== Build warnings ($LABEL) ====\n" >>$mail_msg_file 216 egrep -i warning: $SRC/${INSTALLOG}.out \ 217 | egrep -v '^tic:' \ 218 | egrep -v "symbol (\`|')timezone' has differing types:" \ 219 | egrep -v "parameter <PSTAMP> set to" \ 220 | egrep -v "Ignoring unknown host" \ 221 | egrep -v "redefining segment flags attribute for" \ 222 | tee $TMPDIR/build_warnings${SUFFIX} >> $mail_msg_file 223 if [[ -s $TMPDIR/build_warnings${SUFFIX} ]]; then 224 build_ok=n 225 this_build_ok=n 226 fi 227 228 echo "\n==== Ended OS-Net source build at `date` ($LABEL) ====\n" \ 229 >> $LOGFILE 230 231 echo "\n==== Elapsed build time ($LABEL) ====\n" >>$mail_msg_file 232 tail -3 $SRC/${INSTALLOG}.out >>$mail_msg_file 233 234 if [ "$i_FLAG" = "n" ]; then 235 rm -f $SRC/${NOISE}.ref 236 if [ -f $SRC/${NOISE}.out ]; then 237 mv $SRC/${NOISE}.out $SRC/${NOISE}.ref 238 fi 239 grep : $SRC/${INSTALLOG}.out \ 240 | egrep -v '^/' \ 241 | egrep -v '^(Start|Finish|real|user|sys|./bld_awk)' \ 242 | egrep -v '^tic:' \ 243 | egrep -v '^mcs' \ 244 | egrep -v '^LD_LIBRARY_PATH=' \ 245 | egrep -v 'ar: creating' \ 246 | egrep -v 'ar: writing' \ 247 | egrep -v 'conflicts:' \ 248 | egrep -v ':saved created' \ 249 | egrep -v '^stty.*c:' \ 250 | egrep -v '^mfgname.c:' \ 251 | egrep -v '^uname-i.c:' \ 252 | egrep -v '^volumes.c:' \ 253 | egrep -v '^lint library construction:' \ 254 | egrep -v 'tsort: INFORM:' \ 255 | egrep -v 'stripalign:' \ 256 | egrep -v 'chars, width' \ 257 | egrep -v "symbol (\`|')timezone' has differing types:" \ 258 | egrep -v 'PSTAMP' \ 259 | egrep -v '|%WHOANDWHERE%|' \ 260 | egrep -v '^Manifying' \ 261 | egrep -v 'Ignoring unknown host' \ 262 | egrep -v 'Processing method:' \ 263 | egrep -v '^Writing' \ 264 | egrep -v 'spellin1:' \ 265 | egrep -v '^adding:' \ 266 | egrep -v "^echo 'msgid" \ 267 | egrep -v '^echo ' \ 268 | egrep -v '\.c:$' \ 269 | egrep -v '^Adding file:' \ 270 | egrep -v 'CLASSPATH=' \ 271 | egrep -v '\/var\/mail\/:saved' \ 272 | egrep -v -- '-DUTS_VERSION=' \ 273 | egrep -v '^Running Mkbootstrap' \ 274 | egrep -v '^Applet length read:' \ 275 | egrep -v 'bytes written:' \ 276 | egrep -v '^File:SolarisAuthApplet.bin' \ 277 | egrep -v -i 'jibversion' \ 278 | egrep -v '^Output size:' \ 279 | egrep -v '^Solo size statistics:' \ 280 | egrep -v '^Using ROM API Version' \ 281 | egrep -v '^Zero Signature length:' \ 282 | egrep -v '^Note \(probably harmless\):' \ 283 | egrep -v '::' \ 284 | egrep -v -- '-xcache' \ 285 | egrep -v '^\+' \ 286 | egrep -v '^cc1: note: -fwritable-strings' \ 287 | egrep -v 'svccfg-native -s svc:/' \ 288 | sort | uniq >$SRC/${NOISE}.out 289 if [ ! -f $SRC/${NOISE}.ref ]; then 290 cp $SRC/${NOISE}.out $SRC/${NOISE}.ref 291 fi 292 echo "\n==== Build noise differences ($LABEL) ====\n" \ 293 >>$mail_msg_file 294 diff $SRC/${NOISE}.ref $SRC/${NOISE}.out >>$mail_msg_file 295 fi 296 297 # 298 # Re-sign selected binaries using signing server 299 # (gatekeeper builds only) 300 # 301 if [ -n "$CODESIGN_USER" -a "$this_build_ok" = "y" ]; then 302 echo "\n==== Signing proto area at `date` ====\n" >> $LOGFILE 303 signing_file="${TMPDIR}/signing" 304 rm -f ${signing_file} 305 export CODESIGN_USER 306 signproto $SRC/tools/codesign/creds 2>&1 | \ 307 tee -a ${signing_file} >> $LOGFILE 308 echo "\n==== Finished signing proto area at `date` ====\n" \ 309 >> $LOGFILE 310 echo "\n==== Crypto module signing errors ($LABEL) ====\n" \ 311 >> $mail_msg_file 312 egrep 'WARNING|ERROR' ${signing_file} >> $mail_msg_file 313 if (( $? == 0 )) ; then 314 build_ok=n 315 this_build_ok=n 316 fi 317 fi 318 319 # 320 # Building Packages 321 # 322 if [ "$p_FLAG" = "y" -a "$this_build_ok" = "y" ]; then 323 if [ -d $SRC/pkg ]; then 324 echo "\n==== Creating $LABEL packages at `date` ====\n" \ 325 >> $LOGFILE 326 echo "Clearing out $PKGARCHIVE ..." >> $LOGFILE 327 rm -rf $PKGARCHIVE >> "$LOGFILE" 2>&1 328 mkdir -p $PKGARCHIVE >> "$LOGFILE" 2>&1 329 330 rm -f $SRC/pkg/${INSTALLOG}.out 331 cd $SRC/pkg 332 /bin/time $MAKE -e install 2>&1 | \ 333 tee -a $SRC/pkg/${INSTALLOG}.out >> $LOGFILE 334 335 echo "\n==== package build errors ($LABEL) ====\n" \ 336 >> $mail_msg_file 337 338 egrep "${MAKE}|ERROR|WARNING" $SRC/pkg/${INSTALLOG}.out | \ 339 grep ':' | \ 340 grep -v PSTAMP | \ 341 egrep -v "Ignoring unknown host" | \ 342 tee $TMPDIR/package >> $mail_msg_file 343 if [[ -s $TMPDIR/package ]]; then 344 build_extras_ok=n 345 this_build_ok=n 346 fi 347 else 348 # 349 # Handle it gracefully if -p was set but there so 350 # no pkg directory. 351 # 352 echo "\n==== No $LABEL packages to build ====\n" \ 353 >> $LOGFILE 354 fi 355 else 356 echo "\n==== Not creating $LABEL packages ====\n" >> $LOGFILE 357 fi 358 359 ROOT=$ORIGROOT 360} 361 362# Usage: dolint /dir y|n 363# Arg. 2 is a flag to turn on/off the lint diff output 364function dolint { 365 if [ ! -d "$1" ]; then 366 echo "dolint error: $1 is not a directory" 367 exit 1 368 fi 369 370 if [ "$2" != "y" -a "$2" != "n" ]; then 371 echo "dolint internal error: $2 should be 'y' or 'n'" 372 exit 1 373 fi 374 375 lintdir=$1 376 dodiff=$2 377 base=`basename $lintdir` 378 LINTOUT=$lintdir/lint-${MACH}.out 379 LINTNOISE=$lintdir/lint-noise-${MACH} 380 export ENVLDLIBS1=`myldlibs $ROOT` 381 export ENVCPPFLAGS1=`myheaders $ROOT` 382 383 set_debug_build_flags 384 385 # 386 # '$MAKE lint' in $lintdir 387 # 388 echo "\n==== Begin '$MAKE lint' of $base at `date` ====\n" >> $LOGFILE 389 390 # remove old lint.out 391 rm -f $lintdir/lint.out $lintdir/lint-noise.out 392 if [ -f $lintdir/lint-noise.ref ]; then 393 mv $lintdir/lint-noise.ref ${LINTNOISE}.ref 394 fi 395 396 rm -f $LINTOUT 397 cd $lintdir 398 # 399 # Remove all .ln files to ensure a full reference file 400 # 401 rm -f Nothing_to_remove \ 402 `find . \( -name SCCS -o -name .hg -o -name .svn -o -name .git \) \ 403 -prune -o -type f -name '*.ln' -print ` 404 405 /bin/time $MAKE -ek lint 2>&1 | \ 406 tee -a $LINTOUT >> $LOGFILE 407 408 echo "\n==== '$MAKE lint' of $base ERRORS ====\n" >> $mail_msg_file 409 410 grep "$MAKE:" $LINTOUT | 411 egrep -v "Ignoring unknown host" | \ 412 tee $TMPDIR/lint_errs >> $mail_msg_file 413 if [[ -s $TMPDIR/lint_errs ]]; then 414 build_extras_ok=n 415 fi 416 417 echo "\n==== Ended '$MAKE lint' of $base at `date` ====\n" >> $LOGFILE 418 419 echo "\n==== Elapsed time of '$MAKE lint' of $base ====\n" \ 420 >>$mail_msg_file 421 tail -3 $LINTOUT >>$mail_msg_file 422 423 rm -f ${LINTNOISE}.ref 424 if [ -f ${LINTNOISE}.out ]; then 425 mv ${LINTNOISE}.out ${LINTNOISE}.ref 426 fi 427 grep : $LINTOUT | \ 428 egrep -v '^(real|user|sys)' | 429 egrep -v '(library construction)' | \ 430 egrep -v ': global crosschecks' | \ 431 egrep -v 'Ignoring unknown host' | \ 432 egrep -v '\.c:$' | \ 433 sort | uniq > ${LINTNOISE}.out 434 if [ ! -f ${LINTNOISE}.ref ]; then 435 cp ${LINTNOISE}.out ${LINTNOISE}.ref 436 fi 437 438 if [ "$dodiff" != "n" ]; then 439 echo "\n==== lint warnings $base ====\n" \ 440 >>$mail_msg_file 441 # should be none, though there are a few that were filtered out 442 # above 443 egrep -i '(warning|lint):' ${LINTNOISE}.out \ 444 | sort | uniq | tee $TMPDIR/lint_warns >> $mail_msg_file 445 if [[ -s $TMPDIR/lint_warns ]]; then 446 build_extras_ok=n 447 fi 448 echo "\n==== lint noise differences $base ====\n" \ 449 >> $mail_msg_file 450 diff ${LINTNOISE}.ref ${LINTNOISE}.out \ 451 >> $mail_msg_file 452 fi 453} 454 455# 456# Build and install the onbld tools. 457# 458# usage: build_tools DESTROOT 459# 460# returns non-zero status if the build was successful. 461# 462function build_tools { 463 DESTROOT=$1 464 465 INSTALLOG=install-${MACH} 466 467 echo "\n==== Building tools at `date` ====\n" \ 468 >> $LOGFILE 469 470 rm -f ${TOOLS}/${INSTALLOG}.out 471 cd ${TOOLS} 472 /bin/time $MAKE TOOLS_PROTO=${DESTROOT} -e install 2>&1 | \ 473 tee -a ${TOOLS}/${INSTALLOG}.out >> $LOGFILE 474 475 echo "\n==== Tools build errors ====\n" >> $mail_msg_file 476 477 egrep ":" ${TOOLS}/${INSTALLOG}.out | 478 egrep -e "(${MAKE}:|[ ]error[: \n])" | \ 479 egrep -v "Ignoring unknown host" | \ 480 egrep -v warning | tee $TMPDIR/tools_errors >> $mail_msg_file 481 482 if [[ -s $TMPDIR/tools_errors ]]; then 483 return 1 484 fi 485 return 0 486} 487 488# 489# Set up to use locally installed tools. 490# 491# usage: use_tools TOOLSROOT 492# 493function use_tools { 494 TOOLSROOT=$1 495 496 # 497 # If we're not building ON workspace, then the TOOLSROOT 498 # settings here are clearly ignored by the workspace 499 # makefiles, prepending nonexistent directories to PATH is 500 # harmless, and we clearly do not wish to override 501 # ONBLD_TOOLS. 502 # 503 # If we're building an ON workspace, then the prepended PATH 504 # elements should supercede the preexisting ONBLD_TOOLS paths, 505 # and we want to override ONBLD_TOOLS to catch the tools that 506 # don't have specific path env vars here. 507 # 508 # So the only conditional behavior is overriding ONBLD_TOOLS, 509 # and we check for "an ON workspace" by looking for 510 # ${TOOLSROOT}/opt/onbld. 511 # 512 513 STABS=${TOOLSROOT}/opt/onbld/bin/${MACH}/stabs 514 export STABS 515 CTFSTABS=${TOOLSROOT}/opt/onbld/bin/${MACH}/ctfstabs 516 export CTFSTABS 517 GENOFFSETS=${TOOLSROOT}/opt/onbld/bin/genoffsets 518 export GENOFFSETS 519 520 CTFCONVERT=${TOOLSROOT}/opt/onbld/bin/${MACH}/ctfconvert 521 export CTFCONVERT 522 CTFMERGE=${TOOLSROOT}/opt/onbld/bin/${MACH}/ctfmerge 523 export CTFMERGE 524 525 CTFCVTPTBL=${TOOLSROOT}/opt/onbld/bin/ctfcvtptbl 526 export CTFCVTPTBL 527 CTFFINDMOD=${TOOLSROOT}/opt/onbld/bin/ctffindmod 528 export CTFFINDMOD 529 530 if [ "$VERIFY_ELFSIGN" = "y" ]; then 531 ELFSIGN=${TOOLSROOT}/opt/onbld/bin/elfsigncmp 532 else 533 ELFSIGN=${TOOLSROOT}/opt/onbld/bin/${MACH}/elfsign 534 fi 535 export ELFSIGN 536 537 PATH="${TOOLSROOT}/opt/onbld/bin/${MACH}:${PATH}" 538 PATH="${TOOLSROOT}/opt/onbld/bin:${PATH}" 539 export PATH 540 541 if [ -d "${TOOLSROOT}/opt/onbld" ]; then 542 ONBLD_TOOLS=${TOOLSROOT}/opt/onbld 543 export ONBLD_TOOLS 544 fi 545 546 echo "\n==== New environment settings. ====\n" >> $LOGFILE 547 echo "STABS=${STABS}" >> $LOGFILE 548 echo "CTFSTABS=${CTFSTABS}" >> $LOGFILE 549 echo "CTFCONVERT=${CTFCONVERT}" >> $LOGFILE 550 echo "CTFMERGE=${CTFMERGE}" >> $LOGFILE 551 echo "CTFCVTPTBL=${CTFCVTPTBL}" >> $LOGFILE 552 echo "CTFFINDMOD=${CTFFINDMOD}" >> $LOGFILE 553 echo "ELFSIGN=${ELFSIGN}" >> $LOGFILE 554 echo "PATH=${PATH}" >> $LOGFILE 555 echo "ONBLD_TOOLS=${ONBLD_TOOLS}" >> $LOGFILE 556} 557 558function staffer { 559 if [ $ISUSER -ne 0 ]; then 560 "$@" 561 else 562 arg="\"$1\"" 563 shift 564 for i 565 do 566 arg="$arg \"$i\"" 567 done 568 eval su $STAFFER -c \'$arg\' 569 fi 570} 571 572# 573# Verify that the closed bins are present 574# 575function check_closed_bins { 576 if [[ ! -d "$ON_CLOSED_BINS" ]]; then 577 echo "ON_CLOSED_BINS must point to the closed binaries tree." 578 build_ok=n 579 exit 1 580 fi 581} 582 583# 584# wrapper over wsdiff. 585# usage: do_wsdiff LABEL OLDPROTO NEWPROTO 586# 587function do_wsdiff { 588 label=$1 589 oldproto=$2 590 newproto=$3 591 592 wsdiff="wsdiff" 593 [ "$t_FLAG" = y ] && wsdiff="wsdiff -t" 594 595 echo "\n==== Getting object changes since last build at `date`" \ 596 "($label) ====\n" | tee -a $LOGFILE >> $mail_msg_file 597 $wsdiff -s -r ${TMPDIR}/wsdiff.results $oldproto $newproto 2>&1 | \ 598 tee -a $LOGFILE >> $mail_msg_file 599 echo "\n==== Object changes determined at `date` ($label) ====\n" | \ 600 tee -a $LOGFILE >> $mail_msg_file 601} 602 603# 604# Functions for setting build flags (DEBUG/non-DEBUG). Keep them 605# together. 606# 607 608function set_non_debug_build_flags { 609 export RELEASE_BUILD ; RELEASE_BUILD= 610 unset EXTRA_OPTIONS 611 unset EXTRA_CFLAGS 612} 613 614function set_debug_build_flags { 615 unset RELEASE_BUILD 616 unset EXTRA_OPTIONS 617 unset EXTRA_CFLAGS 618} 619 620 621MACH=`uname -p` 622 623if [ "$OPTHOME" = "" ]; then 624 OPTHOME=/opt 625 export OPTHOME 626fi 627 628USAGE='Usage: nightly [-in] [+t] [-V VERS ] <env_file> 629 630Where: 631 -i Fast incremental options (no clobber, lint, check) 632 -n Do not do a bringover 633 +t Use the build tools in $ONBLD_TOOLS/bin 634 -V VERS set the build version string to VERS 635 636 <env_file> file in Bourne shell syntax that sets and exports 637 variables that configure the operation of this script and many of 638 the scripts this one calls. If <env_file> does not exist, 639 it will be looked for in $OPTHOME/onbld/env. 640 641non-DEBUG is the default build type. Build options can be set in the 642NIGHTLY_OPTIONS variable in the <env_file> as follows: 643 644 -A check for ABI differences in .so files 645 -C check for cstyle/hdrchk errors 646 -D do a build with DEBUG on 647 -F do _not_ do a non-DEBUG build 648 -G gate keeper default group of options (-au) 649 -I integration engineer default group of options (-ampu) 650 -M do not run pmodes (safe file permission checker) 651 -N do not run protocmp 652 -R default group of options for building a release (-mp) 653 -U update proto area in the parent 654 -V VERS set the build version string to VERS 655 -f find unreferenced files 656 -i do an incremental build (no "make clobber") 657 -l do "make lint" in $LINTDIRS (default: $SRC y) 658 -m send mail to $MAILTO at end of build 659 -n do not do a bringover 660 -p create packages 661 -r check ELF runtime attributes in the proto area 662 -t build and use the tools in $SRC/tools (default setting) 663 +t Use the build tools in $ONBLD_TOOLS/bin 664 -u update proto_list_$MACH and friends in the parent workspace; 665 when used with -f, also build an unrefmaster.out in the parent 666 -w report on differences between previous and current proto areas 667' 668# 669# A log file will be generated under the name $LOGFILE 670# for partially completed build and log.`date '+%F'` 671# in the same directory for fully completed builds. 672# 673 674# default values for low-level FLAGS; G I R are group FLAGS 675A_FLAG=n 676C_FLAG=n 677D_FLAG=n 678F_FLAG=n 679f_FLAG=n 680i_FLAG=n; i_CMD_LINE_FLAG=n 681l_FLAG=n 682M_FLAG=n 683m_FLAG=n 684N_FLAG=n 685n_FLAG=n 686p_FLAG=n 687r_FLAG=n 688t_FLAG=y 689U_FLAG=n 690u_FLAG=n 691V_FLAG=n 692w_FLAG=n 693W_FLAG=n 694# 695build_ok=y 696build_extras_ok=y 697 698# 699# examine arguments 700# 701 702OPTIND=1 703while getopts +intV:W FLAG 704do 705 case $FLAG in 706 i ) i_FLAG=y; i_CMD_LINE_FLAG=y 707 ;; 708 n ) n_FLAG=y 709 ;; 710 +t ) t_FLAG=n 711 ;; 712 V ) V_FLAG=y 713 V_ARG="$OPTARG" 714 ;; 715 W ) W_FLAG=y 716 ;; 717 \? ) echo "$USAGE" 718 exit 1 719 ;; 720 esac 721done 722 723# correct argument count after options 724shift `expr $OPTIND - 1` 725 726# test that the path to the environment-setting file was given 727if [ $# -ne 1 ]; then 728 echo "$USAGE" 729 exit 1 730fi 731 732# check if user is running nightly as root 733# ISUSER is set non-zero if an ordinary user runs nightly, or is zero 734# when root invokes nightly. 735/usr/bin/id | grep '^uid=0(' >/dev/null 2>&1 736ISUSER=$?; export ISUSER 737 738# 739# force locale to C 740LANG=C; export LANG 741LC_ALL=C; export LC_ALL 742LC_COLLATE=C; export LC_COLLATE 743LC_CTYPE=C; export LC_CTYPE 744LC_MESSAGES=C; export LC_MESSAGES 745LC_MONETARY=C; export LC_MONETARY 746LC_NUMERIC=C; export LC_NUMERIC 747LC_TIME=C; export LC_TIME 748 749# clear environment variables we know to be bad for the build 750unset LD_OPTIONS 751unset LD_AUDIT LD_AUDIT_32 LD_AUDIT_64 752unset LD_BIND_NOW LD_BIND_NOW_32 LD_BIND_NOW_64 753unset LD_BREADTH LD_BREADTH_32 LD_BREADTH_64 754unset LD_CONFIG LD_CONFIG_32 LD_CONFIG_64 755unset LD_DEBUG LD_DEBUG_32 LD_DEBUG_64 756unset LD_DEMANGLE LD_DEMANGLE_32 LD_DEMANGLE_64 757unset LD_FLAGS LD_FLAGS_32 LD_FLAGS_64 758unset LD_LIBRARY_PATH LD_LIBRARY_PATH_32 LD_LIBRARY_PATH_64 759unset LD_LOADFLTR LD_LOADFLTR_32 LD_LOADFLTR_64 760unset LD_NOAUDIT LD_NOAUDIT_32 LD_NOAUDIT_64 761unset LD_NOAUXFLTR LD_NOAUXFLTR_32 LD_NOAUXFLTR_64 762unset LD_NOCONFIG LD_NOCONFIG_32 LD_NOCONFIG_64 763unset LD_NODIRCONFIG LD_NODIRCONFIG_32 LD_NODIRCONFIG_64 764unset LD_NODIRECT LD_NODIRECT_32 LD_NODIRECT_64 765unset LD_NOLAZYLOAD LD_NOLAZYLOAD_32 LD_NOLAZYLOAD_64 766unset LD_NOOBJALTER LD_NOOBJALTER_32 LD_NOOBJALTER_64 767unset LD_NOVERSION LD_NOVERSION_32 LD_NOVERSION_64 768unset LD_ORIGIN LD_ORIGIN_32 LD_ORIGIN_64 769unset LD_PRELOAD LD_PRELOAD_32 LD_PRELOAD_64 770unset LD_PROFILE LD_PROFILE_32 LD_PROFILE_64 771 772unset CONFIG 773unset GROUP 774unset OWNER 775unset REMOTE 776unset ENV 777unset ARCH 778unset CLASSPATH 779unset NAME 780 781# 782# To get ONBLD_TOOLS from the environment, it must come from the env file. 783# If it comes interactively, it is generally TOOLS_PROTO, which will be 784# clobbered before the compiler version checks, which will therefore fail. 785# 786unset ONBLD_TOOLS 787 788# 789# Setup environmental variables 790# 791if [ -f /etc/nightly.conf ]; then 792 . /etc/nightly.conf 793fi 794 795if [ -f $1 ]; then 796 if [[ $1 = */* ]]; then 797 . $1 798 else 799 . ./$1 800 fi 801else 802 if [ -f $OPTHOME/onbld/env/$1 ]; then 803 . $OPTHOME/onbld/env/$1 804 else 805 echo "Cannot find env file as either $1 or $OPTHOME/onbld/env/$1" 806 exit 1 807 fi 808fi 809 810# contents of stdenv.sh inserted after next line: 811# STDENV_START 812# STDENV_END 813 814# Check if we have sufficient data to continue... 815[[ -v CODEMGR_WS ]] || fatal_error "Error: Variable CODEMGR_WS not set." 816if [[ "${NIGHTLY_OPTIONS}" == ~(F)n ]] ; then 817 # Check if the gate data are valid if we don't do a "bringover" below 818 [[ -d "${CODEMGR_WS}" ]] || \ 819 fatal_error "Error: ${CODEMGR_WS} is not a directory." 820 [[ -f "${CODEMGR_WS}/usr/src/Makefile" ]] || \ 821 fatal_error "Error: ${CODEMGR_WS}/usr/src/Makefile not found." 822fi 823 824# 825# place ourselves in a new task, respecting BUILD_PROJECT if set. 826# 827if [ -z "$BUILD_PROJECT" ]; then 828 /usr/bin/newtask -c $$ 829else 830 /usr/bin/newtask -c $$ -p $BUILD_PROJECT 831fi 832 833ps -o taskid= -p $$ | read build_taskid 834ps -o project= -p $$ | read build_project 835 836# 837# See if NIGHTLY_OPTIONS is set 838# 839if [ "$NIGHTLY_OPTIONS" = "" ]; then 840 NIGHTLY_OPTIONS="-aBm" 841fi 842 843# 844# If BRINGOVER_WS was not specified, let it default to CLONE_WS 845# 846if [ "$BRINGOVER_WS" = "" ]; then 847 BRINGOVER_WS=$CLONE_WS 848fi 849 850# 851# If BRINGOVER_FILES was not specified, default to usr 852# 853if [ "$BRINGOVER_FILES" = "" ]; then 854 BRINGOVER_FILES="usr" 855fi 856 857check_closed_bins 858 859# 860# Note: changes to the option letters here should also be applied to the 861# bldenv script. `d' is listed for backward compatibility. 862# 863NIGHTLY_OPTIONS=-${NIGHTLY_OPTIONS#-} 864OPTIND=1 865while getopts +ABCDdFfGIilMmNnpRrtUuwW FLAG $NIGHTLY_OPTIONS 866do 867 case $FLAG in 868 A ) A_FLAG=y 869 ;; 870 B ) D_FLAG=y 871 ;; # old version of D 872 C ) C_FLAG=y 873 ;; 874 D ) D_FLAG=y 875 ;; 876 F ) F_FLAG=y 877 ;; 878 f ) f_FLAG=y 879 ;; 880 G ) u_FLAG=y 881 ;; 882 I ) m_FLAG=y 883 p_FLAG=y 884 u_FLAG=y 885 ;; 886 i ) i_FLAG=y 887 ;; 888 l ) l_FLAG=y 889 ;; 890 M ) M_FLAG=y 891 ;; 892 m ) m_FLAG=y 893 ;; 894 N ) N_FLAG=y 895 ;; 896 n ) n_FLAG=y 897 ;; 898 p ) p_FLAG=y 899 ;; 900 R ) m_FLAG=y 901 p_FLAG=y 902 ;; 903 r ) r_FLAG=y 904 ;; 905 +t ) t_FLAG=n 906 ;; 907 U ) if [ -z "${PARENT_ROOT}" ]; then 908 echo "PARENT_ROOT must be set if the U flag is" \ 909 "present in NIGHTLY_OPTIONS." 910 exit 1 911 fi 912 NIGHTLY_PARENT_ROOT=$PARENT_ROOT 913 if [ -n "${PARENT_TOOLS_ROOT}" ]; then 914 NIGHTLY_PARENT_TOOLS_ROOT=$PARENT_TOOLS_ROOT 915 fi 916 U_FLAG=y 917 ;; 918 u ) u_FLAG=y 919 ;; 920 w ) w_FLAG=y 921 ;; 922 W ) W_FLAG=y 923 ;; 924 \? ) echo "$USAGE" 925 exit 1 926 ;; 927 esac 928done 929 930if [ $ISUSER -ne 0 ]; then 931 # Set default value for STAFFER, if needed. 932 if [ -z "$STAFFER" -o "$STAFFER" = "nobody" ]; then 933 STAFFER=`/usr/xpg4/bin/id -un` 934 export STAFFER 935 fi 936fi 937 938if [ -z "$MAILTO" -o "$MAILTO" = "nobody" ]; then 939 MAILTO=$STAFFER 940 export MAILTO 941fi 942 943PATH="$OPTHOME/onbld/bin:$OPTHOME/onbld/bin/${MACH}:/usr/ccs/bin" 944PATH="$PATH:$OPTHOME/SUNWspro/bin:/usr/bin:/usr/sbin:/usr/ucb" 945PATH="$PATH:/usr/openwin/bin:/usr/sfw/bin:/opt/sfw/bin:." 946export PATH 947 948# roots of source trees, both relative to $SRC and absolute. 949relsrcdirs="." 950abssrcdirs="$SRC" 951 952PROTOCMPTERSE="protocmp.terse -gu" 953POUND_SIGN="#" 954# have we set RELEASE_DATE in our env file? 955if [ -z "$RELEASE_DATE" ]; then 956 RELEASE_DATE=$(LC_ALL=C date +"%B %Y") 957fi 958BUILD_DATE=$(LC_ALL=C date +%Y-%b-%d) 959BASEWSDIR=$(basename $CODEMGR_WS) 960DEV_CM="\"@(#)SunOS Internal Development: $LOGNAME $BUILD_DATE [$BASEWSDIR]\"" 961 962# we export POUND_SIGN, RELEASE_DATE and DEV_CM to speed up the build process 963# by avoiding repeated shell invocations to evaluate Makefile.master 964# definitions. 965export POUND_SIGN RELEASE_DATE DEV_CM 966 967maketype="distributed" 968if [[ -z "$MAKE" ]]; then 969 MAKE=dmake 970elif [[ ! -x "$MAKE" ]]; then 971 echo "\$MAKE is set to garbage in the environment" 972 exit 1 973fi 974# get the dmake version string alone 975DMAKE_VERSION=$( $MAKE -v ) 976DMAKE_VERSION=${DMAKE_VERSION#*: } 977# focus in on just the dotted version number alone 978DMAKE_MAJOR=$( echo $DMAKE_VERSION | \ 979 sed -e 's/.*\<\([^.]*\.[^ ]*\).*$/\1/' ) 980# extract the second (or final) integer 981DMAKE_MINOR=${DMAKE_MAJOR#*.} 982DMAKE_MINOR=${DMAKE_MINOR%%.*} 983# extract the first integer 984DMAKE_MAJOR=${DMAKE_MAJOR%%.*} 985CHECK_DMAKE=${CHECK_DMAKE:-y} 986# x86 was built on the 12th, sparc on the 13th. 987if [ "$CHECK_DMAKE" = "y" -a \ 988 "$DMAKE_VERSION" != "Sun Distributed Make 7.3 2003/03/12" -a \ 989 "$DMAKE_VERSION" != "Sun Distributed Make 7.3 2003/03/13" -a \( \ 990 "$DMAKE_MAJOR" -lt 7 -o \ 991 "$DMAKE_MAJOR" -eq 7 -a "$DMAKE_MINOR" -lt 4 \) ]; then 992 if [ -z "$DMAKE_VERSION" ]; then 993 echo "$MAKE is missing." 994 exit 1 995 fi 996 echo `whence $MAKE`" version is:" 997 echo " ${DMAKE_VERSION}" 998 cat <<EOF 999 1000This version may not be safe for use, if you really want to use this version 1001anyway add the following to your environment to disable this check: 1002 1003 CHECK_DMAKE=n 1004EOF 1005 exit 1 1006fi 1007export PATH 1008export MAKE 1009 1010if [ "${SUNWSPRO}" != "" ]; then 1011 PATH="${SUNWSPRO}/bin:$PATH" 1012 export PATH 1013fi 1014 1015hostname=$(uname -n) 1016if [[ $DMAKE_MAX_JOBS != +([0-9]) || $DMAKE_MAX_JOBS -eq 0 ]] 1017then 1018 maxjobs= 1019 if [[ -f $HOME/.make.machines ]] 1020 then 1021 # Note: there is a hard tab and space character in the []s 1022 # below. 1023 egrep -i "^[ ]*$hostname[ \.]" \ 1024 $HOME/.make.machines | read host jobs 1025 maxjobs=${jobs##*=} 1026 fi 1027 1028 if [[ $maxjobs != +([0-9]) || $maxjobs -eq 0 ]] 1029 then 1030 # default 1031 maxjobs=4 1032 fi 1033 1034 export DMAKE_MAX_JOBS=$maxjobs 1035fi 1036 1037DMAKE_MODE=parallel; 1038export DMAKE_MODE 1039 1040if [ -z "${ROOT}" ]; then 1041 echo "ROOT must be set." 1042 exit 1 1043fi 1044 1045# 1046# if -V flag was given, reset VERSION to V_ARG 1047# 1048if [ "$V_FLAG" = "y" ]; then 1049 VERSION=$V_ARG 1050fi 1051 1052TMPDIR="/tmp/nightly.tmpdir.$$" 1053export TMPDIR 1054rm -rf ${TMPDIR} 1055mkdir -p $TMPDIR || exit 1 1056chmod 777 $TMPDIR 1057 1058# 1059# Keep elfsign's use of pkcs11_softtoken from looking in the user home 1060# directory, which doesn't always work. Needed until all build machines 1061# have the fix for 6271754 1062# 1063SOFTTOKEN_DIR=$TMPDIR 1064export SOFTTOKEN_DIR 1065 1066# 1067# Tools should only be built non-DEBUG. Keep track of the tools proto 1068# area path relative to $TOOLS, because the latter changes in an 1069# export build. 1070# 1071# TOOLS_PROTO is included below for builds other than usr/src/tools 1072# that look for this location. For usr/src/tools, this will be 1073# overridden on the $MAKE command line in build_tools(). 1074# 1075TOOLS=${SRC}/tools 1076TOOLS_PROTO_REL=proto/root_${MACH}-nd 1077TOOLS_PROTO=${TOOLS}/${TOOLS_PROTO_REL}; export TOOLS_PROTO 1078 1079unset CFLAGS LD_LIBRARY_PATH LDFLAGS 1080 1081# create directories that are automatically removed if the nightly script 1082# fails to start correctly 1083function newdir { 1084 dir=$1 1085 toadd= 1086 while [ ! -d $dir ]; do 1087 toadd="$dir $toadd" 1088 dir=`dirname $dir` 1089 done 1090 torm= 1091 newlist= 1092 for dir in $toadd; do 1093 if staffer mkdir $dir; then 1094 newlist="$ISUSER $dir $newlist" 1095 torm="$dir $torm" 1096 else 1097 [ -z "$torm" ] || staffer rmdir $torm 1098 return 1 1099 fi 1100 done 1101 newdirlist="$newlist $newdirlist" 1102 return 0 1103} 1104newdirlist= 1105 1106[ -d $CODEMGR_WS ] || newdir $CODEMGR_WS || exit 1 1107 1108# since this script assumes the build is from full source, it nullifies 1109# variables likely to have been set by a "ws" script; nullification 1110# confines the search space for headers and libraries to the proto area 1111# built from this immediate source. 1112ENVLDLIBS1= 1113ENVLDLIBS2= 1114ENVLDLIBS3= 1115ENVCPPFLAGS1= 1116ENVCPPFLAGS2= 1117ENVCPPFLAGS3= 1118ENVCPPFLAGS4= 1119PARENT_ROOT= 1120 1121export ENVLDLIBS3 ENVCPPFLAGS1 ENVCPPFLAGS2 ENVCPPFLAGS3 ENVCPPFLAGS4 \ 1122 ENVLDLIBS1 ENVLDLIBS2 PARENT_ROOT 1123 1124PKGARCHIVE_ORIG=$PKGARCHIVE 1125 1126# 1127# Juggle the logs and optionally send mail on completion. 1128# 1129 1130function logshuffle { 1131 LLOG="$ATLOG/log.`date '+%F.%H:%M'`" 1132 if [ -f $LLOG -o -d $LLOG ]; then 1133 LLOG=$LLOG.$$ 1134 fi 1135 mkdir $LLOG 1136 export LLOG 1137 1138 if [ "$build_ok" = "y" ]; then 1139 mv $ATLOG/proto_list_${MACH} $LLOG 1140 1141 if [ -f $ATLOG/proto_list_tools_${MACH} ]; then 1142 mv $ATLOG/proto_list_tools_${MACH} $LLOG 1143 fi 1144 1145 if [ -f $TMPDIR/wsdiff.results ]; then 1146 mv $TMPDIR/wsdiff.results $LLOG 1147 fi 1148 1149 if [ -f $TMPDIR/wsdiff-nd.results ]; then 1150 mv $TMPDIR/wsdiff-nd.results $LLOG 1151 fi 1152 fi 1153 1154 # 1155 # Now that we're about to send mail, it's time to check the noise 1156 # file. In the event that an error occurs beyond this point, it will 1157 # be recorded in the nightly.log file, but nowhere else. This would 1158 # include only errors that cause the copying of the noise log to fail 1159 # or the mail itself not to be sent. 1160 # 1161 1162 exec >>$LOGFILE 2>&1 1163 if [ -s $build_noise_file ]; then 1164 echo "\n==== Nightly build noise ====\n" | 1165 tee -a $LOGFILE >>$mail_msg_file 1166 cat $build_noise_file >>$LOGFILE 1167 cat $build_noise_file >>$mail_msg_file 1168 echo | tee -a $LOGFILE >>$mail_msg_file 1169 fi 1170 rm -f $build_noise_file 1171 1172 case "$build_ok" in 1173 y) 1174 state=Completed 1175 ;; 1176 i) 1177 state=Interrupted 1178 ;; 1179 *) 1180 state=Failed 1181 ;; 1182 esac 1183 1184 if [[ $state != "Interrupted" && $build_extras_ok != "y" ]]; then 1185 state=Failed 1186 fi 1187 1188 NIGHTLY_STATUS=$state 1189 export NIGHTLY_STATUS 1190 1191 run_hook POST_NIGHTLY $state 1192 run_hook SYS_POST_NIGHTLY $state 1193 1194 # 1195 # mailx(1) sets From: based on the -r flag 1196 # if it is given. 1197 # 1198 mailx_r= 1199 if [[ -n "${MAILFROM}" ]]; then 1200 mailx_r="-r ${MAILFROM}" 1201 fi 1202 1203 cat $build_time_file $build_environ_file $mail_msg_file \ 1204 > ${LLOG}/mail_msg 1205 if [ "$m_FLAG" = "y" ]; then 1206 cat ${LLOG}/mail_msg | /usr/bin/mailx ${mailx_r} -s \ 1207 "Nightly ${MACH} Build of `basename ${CODEMGR_WS}` ${state}." \ 1208 ${MAILTO} 1209 fi 1210 1211 if [ "$u_FLAG" = "y" -a "$build_ok" = "y" ]; then 1212 staffer cp ${LLOG}/mail_msg $PARENT_WS/usr/src/mail_msg-${MACH} 1213 staffer cp $LOGFILE $PARENT_WS/usr/src/nightly-${MACH}.log 1214 fi 1215 1216 mv $LOGFILE $LLOG 1217} 1218 1219# 1220# Remove the locks and temporary files on any exit 1221# 1222function cleanup { 1223 logshuffle 1224 1225 [ -z "$lockfile" ] || staffer rm -f $lockfile 1226 [ -z "$atloglockfile" ] || rm -f $atloglockfile 1227 [ -z "$ulockfile" ] || staffer rm -f $ulockfile 1228 [ -z "$Ulockfile" ] || rm -f $Ulockfile 1229 1230 set -- $newdirlist 1231 while [ $# -gt 0 ]; do 1232 ISUSER=$1 staffer rmdir $2 1233 shift; shift 1234 done 1235 rm -rf $TMPDIR 1236} 1237 1238function cleanup_signal { 1239 build_ok=i 1240 # this will trigger cleanup(), above. 1241 exit 1 1242} 1243 1244trap cleanup 0 1245trap cleanup_signal 1 2 3 15 1246 1247# 1248# Generic lock file processing -- make sure that the lock file doesn't 1249# exist. If it does, it should name the build host and PID. If it 1250# doesn't, then make sure we can create it. Clean up locks that are 1251# known to be stale (assumes host name is unique among build systems 1252# for the workspace). 1253# 1254function create_lock { 1255 lockf=$1 1256 lockvar=$2 1257 1258 ldir=`dirname $lockf` 1259 [ -d $ldir ] || newdir $ldir || exit 1 1260 eval $lockvar=$lockf 1261 1262 while ! staffer ln -s $hostname.$STAFFER.$$ $lockf 2> /dev/null; do 1263 basews=`basename $CODEMGR_WS` 1264 ls -l $lockf | nawk '{print $NF}' | IFS=. read host user pid 1265 if [ "$host" != "$hostname" ]; then 1266 echo "$MACH build of $basews apparently" \ 1267 "already started by $user on $host as $pid." 1268 exit 1 1269 elif kill -s 0 $pid 2>/dev/null; then 1270 echo "$MACH build of $basews already started" \ 1271 "by $user as $pid." 1272 exit 1 1273 else 1274 # stale lock; clear it out and try again 1275 rm -f $lockf 1276 fi 1277 done 1278} 1279 1280# 1281# Return the list of interesting proto areas, depending on the current 1282# options. 1283# 1284function allprotos { 1285 typeset roots="$ROOT" 1286 1287 if [[ "$F_FLAG" = n && "$MULTI_PROTO" = yes ]]; then 1288 roots="$roots $ROOT-nd" 1289 fi 1290 1291 echo $roots 1292} 1293 1294# Ensure no other instance of this script is running on this host. 1295# LOCKNAME can be set in <env_file>, and is by default, but is not 1296# required due to the use of $ATLOG below. 1297if [ -n "$LOCKNAME" ]; then 1298 create_lock /tmp/$LOCKNAME "lockfile" 1299fi 1300# 1301# Create from one, two, or three other locks: 1302# $ATLOG/nightly.lock 1303# - protects against multiple builds in same workspace 1304# $PARENT_WS/usr/src/nightly.$MACH.lock 1305# - protects against multiple 'u' copy-backs 1306# $NIGHTLY_PARENT_ROOT/nightly.lock 1307# - protects against multiple 'U' copy-backs 1308# 1309# Overriding ISUSER to 1 causes the lock to be created as root if the 1310# script is run as root. The default is to create it as $STAFFER. 1311ISUSER=1 create_lock $ATLOG/nightly.lock "atloglockfile" 1312if [ "$u_FLAG" = "y" ]; then 1313 create_lock $PARENT_WS/usr/src/nightly.$MACH.lock "ulockfile" 1314fi 1315if [ "$U_FLAG" = "y" ]; then 1316 # NIGHTLY_PARENT_ROOT is written as root if script invoked as root. 1317 ISUSER=1 create_lock $NIGHTLY_PARENT_ROOT/nightly.lock "Ulockfile" 1318fi 1319 1320# Locks have been taken, so we're doing a build and we're committed to 1321# the directories we may have created so far. 1322newdirlist= 1323 1324# 1325# Create mail_msg_file 1326# 1327mail_msg_file="${TMPDIR}/mail_msg" 1328touch $mail_msg_file 1329build_time_file="${TMPDIR}/build_time" 1330build_environ_file="${TMPDIR}/build_environ" 1331touch $build_environ_file 1332# 1333# Move old LOGFILE aside 1334# ATLOG directory already made by 'create_lock' above 1335# 1336if [ -f $LOGFILE ]; then 1337 mv -f $LOGFILE ${LOGFILE}- 1338fi 1339# 1340# Build OsNet source 1341# 1342START_DATE=`date` 1343SECONDS=0 1344echo "\n==== Nightly $maketype build started: $START_DATE ====" \ 1345 | tee -a $LOGFILE > $build_time_file 1346 1347echo "\nBuild project: $build_project\nBuild taskid: $build_taskid" | \ 1348 tee -a $mail_msg_file >> $LOGFILE 1349 1350# make sure we log only to the nightly build file 1351build_noise_file="${TMPDIR}/build_noise" 1352exec </dev/null >$build_noise_file 2>&1 1353 1354run_hook SYS_PRE_NIGHTLY 1355run_hook PRE_NIGHTLY 1356 1357echo "\n==== list of environment variables ====\n" >> $LOGFILE 1358env >> $LOGFILE 1359 1360echo "\n==== Nightly argument issues ====\n" | tee -a $mail_msg_file >> $LOGFILE 1361 1362if [ "$N_FLAG" = "y" ]; then 1363 if [ "$p_FLAG" = "y" ]; then 1364 cat <<EOF | tee -a $mail_msg_file >> $LOGFILE 1365WARNING: the p option (create packages) is set, but so is the N option (do 1366 not run protocmp); this is dangerous; you should unset the N option 1367EOF 1368 else 1369 cat <<EOF | tee -a $mail_msg_file >> $LOGFILE 1370Warning: the N option (do not run protocmp) is set; it probably shouldn't be 1371EOF 1372 fi 1373 echo "" | tee -a $mail_msg_file >> $LOGFILE 1374fi 1375 1376if [ "$D_FLAG" = "n" -a "$l_FLAG" = "y" ]; then 1377 # 1378 # In the past we just complained but went ahead with the lint 1379 # pass, even though the proto area was built non-DEBUG. It's 1380 # unlikely that non-DEBUG headers will make a difference, but 1381 # rather than assuming it's a safe combination, force the user 1382 # to specify a DEBUG build. 1383 # 1384 echo "WARNING: DEBUG build not requested; disabling lint.\n" \ 1385 | tee -a $mail_msg_file >> $LOGFILE 1386 l_FLAG=n 1387fi 1388 1389if [ "$f_FLAG" = "y" ]; then 1390 if [ "$i_FLAG" = "y" ]; then 1391 echo "WARNING: the -f flag cannot be used during incremental" \ 1392 "builds; ignoring -f\n" | tee -a $mail_msg_file >> $LOGFILE 1393 f_FLAG=n 1394 fi 1395 if [ "${l_FLAG}${p_FLAG}" != "yy" ]; then 1396 echo "WARNING: the -f flag requires -l, and -p;" \ 1397 "ignoring -f\n" | tee -a $mail_msg_file >> $LOGFILE 1398 f_FLAG=n 1399 fi 1400fi 1401 1402if [ "$w_FLAG" = "y" -a ! -d $ROOT ]; then 1403 echo "WARNING: -w specified, but $ROOT does not exist;" \ 1404 "ignoring -w\n" | tee -a $mail_msg_file >> $LOGFILE 1405 w_FLAG=n 1406fi 1407 1408if [ "$t_FLAG" = "n" ]; then 1409 # 1410 # We're not doing a tools build, so make sure elfsign(1) is 1411 # new enough to safely sign non-crypto binaries. We test 1412 # debugging output from elfsign to detect the old version. 1413 # 1414 newelfsigntest=`SUNW_CRYPTO_DEBUG=stderr /usr/bin/elfsign verify \ 1415 -e /usr/lib/security/pkcs11_softtoken.so.1 2>&1 \ 1416 | egrep algorithmOID` 1417 if [ -z "$newelfsigntest" ]; then 1418 echo "WARNING: /usr/bin/elfsign out of date;" \ 1419 "will only sign crypto modules\n" | \ 1420 tee -a $mail_msg_file >> $LOGFILE 1421 export ELFSIGN_OBJECT=true 1422 elif [ "$VERIFY_ELFSIGN" = "y" ]; then 1423 echo "WARNING: VERIFY_ELFSIGN=y requires" \ 1424 "the -t flag; ignoring VERIFY_ELFSIGN\n" | \ 1425 tee -a $mail_msg_file >> $LOGFILE 1426 fi 1427fi 1428 1429case $MULTI_PROTO in 1430yes|no) ;; 1431*) 1432 echo "WARNING: MULTI_PROTO is \"$MULTI_PROTO\"; " \ 1433 "should be \"yes\" or \"no\"." | tee -a $mail_msg_file >> $LOGFILE 1434 echo "Setting MULTI_PROTO to \"no\".\n" | \ 1435 tee -a $mail_msg_file >> $LOGFILE 1436 export MULTI_PROTO=no 1437 ;; 1438esac 1439 1440echo "\n==== Build version ====\n" | tee -a $mail_msg_file >> $LOGFILE 1441echo $VERSION | tee -a $mail_msg_file >> $LOGFILE 1442 1443# Save the current proto area if we're comparing against the last build 1444if [ "$w_FLAG" = "y" -a -d "$ROOT" ]; then 1445 if [ -d "$ROOT.prev" ]; then 1446 rm -rf $ROOT.prev 1447 fi 1448 mv $ROOT $ROOT.prev 1449fi 1450 1451# Same for non-DEBUG proto area 1452if [ "$w_FLAG" = "y" -a "$MULTI_PROTO" = yes -a -d "$ROOT-nd" ]; then 1453 if [ -d "$ROOT-nd.prev" ]; then 1454 rm -rf $ROOT-nd.prev 1455 fi 1456 mv $ROOT-nd $ROOT-nd.prev 1457fi 1458 1459# 1460# Echo the SCM type of the parent workspace, this can't just be which_scm 1461# as that does not know how to identify various network repositories. 1462# 1463function parent_wstype { 1464 typeset scm_type junk 1465 1466 CODEMGR_WS="$BRINGOVER_WS" "$WHICH_SCM" 2>/dev/null \ 1467 | read scm_type junk 1468 if [[ -z "$scm_type" || "$scm_type" == unknown ]]; then 1469 # Probe BRINGOVER_WS to determine its type 1470 if [[ $BRINGOVER_WS == ssh://* ]]; then 1471 scm_type="mercurial" 1472 elif [[ $BRINGOVER_WS == http://* ]] && \ 1473 wget -q -O- --save-headers "$BRINGOVER_WS/?cmd=heads" | \ 1474 egrep -s "application/mercurial" 2> /dev/null; then 1475 scm_type="mercurial" 1476 else 1477 scm_type="none" 1478 fi 1479 fi 1480 1481 # fold both unsupported and unrecognized results into "none" 1482 case "$scm_type" in 1483 mercurial) 1484 ;; 1485 *) scm_type=none 1486 ;; 1487 esac 1488 1489 echo $scm_type 1490} 1491 1492# Echo the SCM types of $CODEMGR_WS and $BRINGOVER_WS 1493function child_wstype { 1494 typeset scm_type junk 1495 1496 # Probe CODEMGR_WS to determine its type 1497 if [[ -d $CODEMGR_WS ]]; then 1498 $WHICH_SCM | read scm_type junk || exit 1 1499 fi 1500 1501 case "$scm_type" in 1502 none|git|mercurial) 1503 ;; 1504 *) scm_type=none 1505 ;; 1506 esac 1507 1508 echo $scm_type 1509} 1510 1511SCM_TYPE=$(child_wstype) 1512 1513# 1514# Decide whether to clobber 1515# 1516if [ "$i_FLAG" = "n" -a -d "$SRC" ]; then 1517 echo "\n==== Make clobber at `date` ====\n" >> $LOGFILE 1518 1519 cd $SRC 1520 # remove old clobber file 1521 rm -f $SRC/clobber.out 1522 rm -f $SRC/clobber-${MACH}.out 1523 1524 # Remove all .make.state* files, just in case we are restarting 1525 # the build after having interrupted a previous 'make clobber'. 1526 find . \( -name SCCS -o -name .hg -o -name .svn -o -name .git \ 1527 -o -name 'interfaces.*' \) -prune \ 1528 -o -name '.make.*' -print | xargs rm -f 1529 1530 $MAKE -ek clobber 2>&1 | tee -a $SRC/clobber-${MACH}.out >> $LOGFILE 1531 echo "\n==== Make clobber ERRORS ====\n" >> $mail_msg_file 1532 grep "$MAKE:" $SRC/clobber-${MACH}.out | 1533 egrep -v "Ignoring unknown host" | \ 1534 tee $TMPDIR/clobber_errs >> $mail_msg_file 1535 1536 if [[ -s $TMPDIR/clobber_errs ]]; then 1537 build_extras_ok=n 1538 fi 1539 1540 if [[ "$t_FLAG" = "y" ]]; then 1541 echo "\n==== Make tools clobber at `date` ====\n" >> $LOGFILE 1542 cd ${TOOLS} 1543 rm -f ${TOOLS}/clobber-${MACH}.out 1544 $MAKE TOOLS_PROTO=$TOOLS_PROTO -ek clobber 2>&1 | \ 1545 tee -a ${TOOLS}/clobber-${MACH}.out >> $LOGFILE 1546 echo "\n==== Make tools clobber ERRORS ====\n" \ 1547 >> $mail_msg_file 1548 grep "$MAKE:" ${TOOLS}/clobber-${MACH}.out \ 1549 >> $mail_msg_file 1550 if (( $? == 0 )); then 1551 build_extras_ok=n 1552 fi 1553 rm -rf ${TOOLS_PROTO} 1554 mkdir -p ${TOOLS_PROTO} 1555 fi 1556 1557 typeset roots=$(allprotos) 1558 echo "\n\nClearing $roots" >> "$LOGFILE" 1559 rm -rf $roots 1560 1561 # Get back to a clean workspace as much as possible to catch 1562 # problems that only occur on fresh workspaces. 1563 # Remove all .make.state* files, libraries, and .o's that may 1564 # have been omitted from clobber. A couple of libraries are 1565 # under source code control, so leave them alone. 1566 # We should probably blow away temporary directories too. 1567 cd $SRC 1568 find $relsrcdirs \( -name SCCS -o -name .hg -o -name .svn \ 1569 -o -name .git -o -name 'interfaces.*' \) -prune -o \ 1570 \( -name '.make.*' -o -name 'lib*.a' -o -name 'lib*.so*' -o \ 1571 -name '*.o' \) -print | \ 1572 grep -v 'tools/ctf/dwarf/.*/libdwarf' | xargs rm -f 1573else 1574 echo "\n==== No clobber at `date` ====\n" >> $LOGFILE 1575fi 1576 1577type bringover_mercurial > /dev/null 2>&1 || function bringover_mercurial { 1578 typeset -x PATH=$PATH 1579 1580 # If the repository doesn't exist yet, then we want to populate it. 1581 if [[ ! -d $CODEMGR_WS/.hg ]]; then 1582 staffer hg init $CODEMGR_WS 1583 staffer echo "[paths]" > $CODEMGR_WS/.hg/hgrc 1584 staffer echo "default=$BRINGOVER_WS" >> $CODEMGR_WS/.hg/hgrc 1585 touch $TMPDIR/new_repository 1586 fi 1587 1588 typeset -x HGMERGE="/bin/false" 1589 1590 # 1591 # If the user has changes, regardless of whether those changes are 1592 # committed, and regardless of whether those changes conflict, then 1593 # we'll attempt to merge them either implicitly (uncommitted) or 1594 # explicitly (committed). 1595 # 1596 # These are the messages we'll use to help clarify mercurial output 1597 # in those cases. 1598 # 1599 typeset mergefailmsg="\ 1600***\n\ 1601*** nightly was unable to automatically merge your changes. You should\n\ 1602*** redo the full merge manually, following the steps outlined by mercurial\n\ 1603*** above, then restart nightly.\n\ 1604***\n" 1605 typeset mergepassmsg="\ 1606***\n\ 1607*** nightly successfully merged your changes. This means that your working\n\ 1608*** directory has been updated, but those changes are not yet committed.\n\ 1609*** After nightly completes, you should validate the results of the merge,\n\ 1610*** then use hg commit manually.\n\ 1611***\n" 1612 1613 # 1614 # For each repository in turn: 1615 # 1616 # 1. Do the pull. If this fails, dump the output and bail out. 1617 # 1618 # 2. If the pull resulted in an extra head, do an explicit merge. 1619 # If this fails, dump the output and bail out. 1620 # 1621 # Because we can't rely on Mercurial to exit with a failure code 1622 # when a merge fails (Mercurial issue #186), we must grep the 1623 # output of pull/merge to check for attempted and/or failed merges. 1624 # 1625 # 3. If a merge failed, set the message and fail the bringover. 1626 # 1627 # 4. Otherwise, if a merge succeeded, set the message 1628 # 1629 # 5. Dump the output, and any message from step 3 or 4. 1630 # 1631 1632 typeset HG_SOURCE=$BRINGOVER_WS 1633 if [ ! -f $TMPDIR/new_repository ]; then 1634 HG_SOURCE=$TMPDIR/open_bundle.hg 1635 staffer hg --cwd $CODEMGR_WS incoming --bundle $HG_SOURCE \ 1636 -v $BRINGOVER_WS > $TMPDIR/incoming_open.out 1637 1638 # 1639 # If there are no incoming changesets, then incoming will 1640 # fail, and there will be no bundle file. Reset the source, 1641 # to allow the remaining logic to complete with no false 1642 # negatives. (Unlike incoming, pull will return success 1643 # for the no-change case.) 1644 # 1645 if (( $? != 0 )); then 1646 HG_SOURCE=$BRINGOVER_WS 1647 fi 1648 fi 1649 1650 staffer hg --cwd $CODEMGR_WS pull -u $HG_SOURCE \ 1651 > $TMPDIR/pull_open.out 2>&1 1652 if (( $? != 0 )); then 1653 printf "%s: pull failed as follows:\n\n" "$CODEMGR_WS" 1654 cat $TMPDIR/pull_open.out 1655 if grep "^merging.*failed" $TMPDIR/pull_open.out > /dev/null 2>&1; then 1656 printf "$mergefailmsg" 1657 fi 1658 touch $TMPDIR/bringover_failed 1659 return 1660 fi 1661 1662 if grep "not updating" $TMPDIR/pull_open.out > /dev/null 2>&1; then 1663 staffer hg --cwd $CODEMGR_WS merge \ 1664 >> $TMPDIR/pull_open.out 2>&1 1665 if (( $? != 0 )); then 1666 printf "%s: merge failed as follows:\n\n" \ 1667 "$CODEMGR_WS" 1668 cat $TMPDIR/pull_open.out 1669 if grep "^merging.*failed" $TMPDIR/pull_open.out \ 1670 > /dev/null 2>&1; then 1671 printf "$mergefailmsg" 1672 fi 1673 touch $TMPDIR/bringover_failed 1674 return 1675 fi 1676 fi 1677 1678 printf "updated %s with the following results:\n" "$CODEMGR_WS" 1679 cat $TMPDIR/pull_open.out 1680 if grep "^merging" $TMPDIR/pull_open.out >/dev/null 2>&1; then 1681 printf "$mergepassmsg" 1682 fi 1683 printf "\n" 1684 1685 # 1686 # Per-changeset output is neither useful nor manageable for a 1687 # newly-created repository. 1688 # 1689 if [ -f $TMPDIR/new_repository ]; then 1690 return 1691 fi 1692 1693 printf "\nadded the following changesets to open repository:\n" 1694 cat $TMPDIR/incoming_open.out 1695} 1696 1697type bringover_none > /dev/null 2>&1 || function bringover_none { 1698 echo "Couldn't figure out what kind of SCM to use for $BRINGOVER_WS." 1699 touch $TMPDIR/bringover_failed 1700} 1701 1702# 1703# Decide whether to bringover to the codemgr workspace 1704# 1705if [ "$n_FLAG" = "n" ]; then 1706 PARENT_SCM_TYPE=$(parent_wstype) 1707 1708 if [[ $SCM_TYPE != none && $SCM_TYPE != $PARENT_SCM_TYPE ]]; then 1709 echo "cannot bringover from $PARENT_SCM_TYPE to $SCM_TYPE, " \ 1710 "quitting at `date`." | tee -a $mail_msg_file >> $LOGFILE 1711 exit 1 1712 fi 1713 1714 run_hook PRE_BRINGOVER 1715 1716 echo "\n==== bringover to $CODEMGR_WS at `date` ====\n" >> $LOGFILE 1717 echo "\n==== BRINGOVER LOG ====\n" >> $mail_msg_file 1718 1719 eval "bringover_${PARENT_SCM_TYPE}" 2>&1 | 1720 tee -a $mail_msg_file >> $LOGFILE 1721 1722 if [ -f $TMPDIR/bringover_failed ]; then 1723 rm -f $TMPDIR/bringover_failed 1724 build_ok=n 1725 echo "trouble with bringover, quitting at `date`." | 1726 tee -a $mail_msg_file >> $LOGFILE 1727 exit 1 1728 fi 1729 1730 # 1731 # It's possible that we used the bringover above to create 1732 # $CODEMGR_WS. If so, then SCM_TYPE was previously "none," 1733 # but should now be the same as $BRINGOVER_WS. 1734 # 1735 [[ $SCM_TYPE = none ]] && SCM_TYPE=$PARENT_SCM_TYPE 1736 1737 run_hook POST_BRINGOVER 1738 1739 check_closed_bins 1740 1741else 1742 echo "\n==== No bringover to $CODEMGR_WS ====\n" >> $LOGFILE 1743fi 1744 1745# Safeguards 1746[[ -v CODEMGR_WS ]] || fatal_error "Error: Variable CODEMGR_WS not set." 1747[[ -d "${CODEMGR_WS}" ]] || fatal_error "Error: ${CODEMGR_WS} is not a directory." 1748[[ -f "${CODEMGR_WS}/usr/src/Makefile" ]] || fatal_error "Error: ${CODEMGR_WS}/usr/src/Makefile not found." 1749 1750echo "\n==== Build environment ====\n" | tee -a $build_environ_file >> $LOGFILE 1751 1752# System 1753whence uname | tee -a $build_environ_file >> $LOGFILE 1754uname -a 2>&1 | tee -a $build_environ_file >> $LOGFILE 1755echo | tee -a $build_environ_file >> $LOGFILE 1756 1757# make 1758whence $MAKE | tee -a $build_environ_file >> $LOGFILE 1759$MAKE -v | tee -a $build_environ_file >> $LOGFILE 1760echo "number of concurrent jobs = $DMAKE_MAX_JOBS" | 1761 tee -a $build_environ_file >> $LOGFILE 1762 1763# 1764# Report the compiler versions. 1765# 1766 1767if [[ ! -f $SRC/Makefile ]]; then 1768 build_ok=n 1769 echo "\nUnable to find \"Makefile\" in $SRC." | \ 1770 tee -a $build_environ_file >> $LOGFILE 1771 exit 1 1772fi 1773 1774( cd $SRC 1775 for target in cc-version cc64-version java-version; do 1776 echo 1777 # 1778 # Put statefile somewhere we know we can write to rather than trip 1779 # over a read-only $srcroot. 1780 # 1781 rm -f $TMPDIR/make-state 1782 export SRC 1783 if $MAKE -K $TMPDIR/make-state -e $target 2>/dev/null; then 1784 continue 1785 fi 1786 touch $TMPDIR/nocompiler 1787 done 1788 echo 1789) | tee -a $build_environ_file >> $LOGFILE 1790 1791if [ -f $TMPDIR/nocompiler ]; then 1792 rm -f $TMPDIR/nocompiler 1793 build_ok=n 1794 echo "Aborting due to missing compiler." | 1795 tee -a $build_environ_file >> $LOGFILE 1796 exit 1 1797fi 1798 1799# as 1800whence as | tee -a $build_environ_file >> $LOGFILE 1801as -V 2>&1 | head -1 | tee -a $build_environ_file >> $LOGFILE 1802echo | tee -a $build_environ_file >> $LOGFILE 1803 1804# Check that we're running a capable link-editor 1805whence ld | tee -a $build_environ_file >> $LOGFILE 1806LDVER=`ld -V 2>&1` 1807echo $LDVER | tee -a $build_environ_file >> $LOGFILE 1808LDVER=`echo $LDVER | sed -e "s/.*-1\.\([0-9]*\).*/\1/"` 1809if [ `expr $LDVER \< 422` -eq 1 ]; then 1810 echo "The link-editor needs to be at version 422 or higher to build" | \ 1811 tee -a $build_environ_file >> $LOGFILE 1812 echo "the latest stuff. Hope your build works." | \ 1813 tee -a $build_environ_file >> $LOGFILE 1814fi 1815 1816# 1817# Build and use the workspace's tools if requested 1818# 1819if [[ "$t_FLAG" = "y" ]]; then 1820 set_non_debug_build_flags 1821 1822 build_tools ${TOOLS_PROTO} 1823 if (( $? != 0 )); then 1824 build_ok=n 1825 else 1826 use_tools $TOOLS_PROTO 1827 fi 1828fi 1829 1830# timestamp the start of the normal build; the findunref tool uses it. 1831touch $SRC/.build.tstamp 1832 1833normal_build 1834 1835ORIG_SRC=$SRC 1836BINARCHIVE=${CODEMGR_WS}/bin-${MACH}.cpio.Z 1837 1838 1839# 1840# There are several checks that need to look at the proto area, but 1841# they only need to look at one, and they don't care whether it's 1842# DEBUG or non-DEBUG. 1843# 1844if [[ "$MULTI_PROTO" = yes && "$D_FLAG" = n ]]; then 1845 checkroot=$ROOT-nd 1846else 1847 checkroot=$ROOT 1848fi 1849 1850if [ "$build_ok" = "y" ]; then 1851 echo "\n==== Creating protolist system file at `date` ====" \ 1852 >> $LOGFILE 1853 protolist $checkroot > $ATLOG/proto_list_${MACH} 1854 echo "==== protolist system file created at `date` ====\n" \ 1855 >> $LOGFILE 1856 1857 if [ "$N_FLAG" != "y" ]; then 1858 1859 E1= 1860 f1= 1861 for f in $f1; do 1862 if [ -f "$f" ]; then 1863 E1="$E1 -e $f" 1864 fi 1865 done 1866 1867 E2= 1868 f2= 1869 if [ -d "$SRC/pkg" ]; then 1870 f2="$f2 exceptions/packaging" 1871 fi 1872 1873 for f in $f2; do 1874 if [ -f "$f" ]; then 1875 E2="$E2 -e $f" 1876 fi 1877 done 1878 fi 1879 1880 if [ "$N_FLAG" != "y" -a -d $SRC/pkg ]; then 1881 echo "\n==== Validating manifests against proto area ====\n" \ 1882 >> $mail_msg_file 1883 ( cd $SRC/pkg ; $MAKE -e protocmp ROOT="$checkroot" ) | \ 1884 tee $TMPDIR/protocmp_noise >> $mail_msg_file 1885 if [[ -s $TMPDIR/protocmp_noise ]]; then 1886 build_extras_ok=n 1887 fi 1888 fi 1889 1890 if [ "$N_FLAG" != "y" -a -f "$REF_PROTO_LIST" ]; then 1891 echo "\n==== Impact on proto area ====\n" >> $mail_msg_file 1892 if [ -n "$E2" ]; then 1893 ELIST=$E2 1894 else 1895 ELIST=$E1 1896 fi 1897 $PROTOCMPTERSE \ 1898 "Files in yesterday's proto area, but not today's:" \ 1899 "Files in today's proto area, but not yesterday's:" \ 1900 "Files that changed between yesterday and today:" \ 1901 ${ELIST} \ 1902 -d $REF_PROTO_LIST \ 1903 $ATLOG/proto_list_${MACH} \ 1904 >> $mail_msg_file 1905 fi 1906fi 1907 1908if [[ "$u_FLAG" == "y" && "$build_ok" == "y" && \ 1909 "$build_extras_ok" == "y" ]]; then 1910 staffer cp $ATLOG/proto_list_${MACH} \ 1911 $PARENT_WS/usr/src/proto_list_${MACH} 1912fi 1913 1914# Update parent proto area if necessary. This is done now 1915# so that the proto area has either DEBUG or non-DEBUG kernels. 1916# Note that this clears out the lock file, so we can dispense with 1917# the variable now. 1918if [ "$U_FLAG" = "y" -a "$build_ok" = "y" ]; then 1919 echo "\n==== Copying proto area to $NIGHTLY_PARENT_ROOT ====\n" | \ 1920 tee -a $LOGFILE >> $mail_msg_file 1921 rm -rf $NIGHTLY_PARENT_ROOT/* 1922 unset Ulockfile 1923 mkdir -p $NIGHTLY_PARENT_ROOT 1924 if [[ "$MULTI_PROTO" = no || "$D_FLAG" = y ]]; then 1925 ( cd $ROOT; tar cf - . | 1926 ( cd $NIGHTLY_PARENT_ROOT; umask 0; tar xpf - ) ) 2>&1 | 1927 tee -a $mail_msg_file >> $LOGFILE 1928 fi 1929 if [[ "$MULTI_PROTO" = yes && "$F_FLAG" = n ]]; then 1930 rm -rf $NIGHTLY_PARENT_ROOT-nd/* 1931 mkdir -p $NIGHTLY_PARENT_ROOT-nd 1932 cd $ROOT-nd 1933 ( tar cf - . | 1934 ( cd $NIGHTLY_PARENT_ROOT-nd; umask 0; tar xpf - ) ) 2>&1 | 1935 tee -a $mail_msg_file >> $LOGFILE 1936 fi 1937 if [ -n "${NIGHTLY_PARENT_TOOLS_ROOT}" ]; then 1938 echo "\n==== Copying tools proto area to $NIGHTLY_PARENT_TOOLS_ROOT ====\n" | \ 1939 tee -a $LOGFILE >> $mail_msg_file 1940 rm -rf $NIGHTLY_PARENT_TOOLS_ROOT/* 1941 mkdir -p $NIGHTLY_PARENT_TOOLS_ROOT 1942 if [[ "$MULTI_PROTO" = no || "$D_FLAG" = y ]]; then 1943 ( cd $TOOLS_PROTO; tar cf - . | 1944 ( cd $NIGHTLY_PARENT_TOOLS_ROOT; 1945 umask 0; tar xpf - ) ) 2>&1 | 1946 tee -a $mail_msg_file >> $LOGFILE 1947 fi 1948 fi 1949fi 1950 1951# 1952# ELF verification: ABI (-A) and runtime (-r) checks 1953# 1954if [[ ($build_ok = y) && (($A_FLAG = y) || ($r_FLAG = y)) ]]; then 1955 # Directory ELF-data.$MACH holds the files produced by these tests. 1956 elf_ddir=$SRC/ELF-data.$MACH 1957 1958 # If there is a previous ELF-data backup directory, remove it. Then, 1959 # rotate current ELF-data directory into its place and create a new 1960 # empty directory 1961 rm -rf $elf_ddir.ref 1962 if [[ -d $elf_ddir ]]; then 1963 mv $elf_ddir $elf_ddir.ref 1964 fi 1965 mkdir -p $elf_ddir 1966 1967 # Call find_elf to produce a list of the ELF objects in the proto area. 1968 # This list is passed to check_rtime and interface_check, preventing 1969 # them from separately calling find_elf to do the same work twice. 1970 find_elf -fr $checkroot > $elf_ddir/object_list 1971 1972 if [[ $A_FLAG = y ]]; then 1973 echo "\n==== Check versioning and ABI information ====\n" | \ 1974 tee -a $LOGFILE >> $mail_msg_file 1975 1976 # Produce interface description for the proto. Report errors. 1977 interface_check -o -w $elf_ddir -f object_list \ 1978 -i interface -E interface.err 1979 if [[ -s $elf_ddir/interface.err ]]; then 1980 tee -a $LOGFILE < $elf_ddir/interface.err \ 1981 >> $mail_msg_file 1982 build_extras_ok=n 1983 fi 1984 1985 # If ELF_DATA_BASELINE_DIR is defined, compare the new interface 1986 # description file to that from the baseline gate. Issue a 1987 # warning if the baseline is not present, and keep going. 1988 if [[ "$ELF_DATA_BASELINE_DIR" != '' ]]; then 1989 base_ifile="$ELF_DATA_BASELINE_DIR/interface" 1990 1991 echo "\n==== Compare versioning and ABI information" \ 1992 "to baseline ====\n" | \ 1993 tee -a $LOGFILE >> $mail_msg_file 1994 echo "Baseline: $base_ifile\n" >> $LOGFILE 1995 1996 if [[ -f $base_ifile ]]; then 1997 interface_cmp -d -o $base_ifile \ 1998 $elf_ddir/interface > $elf_ddir/interface.cmp 1999 if [[ -s $elf_ddir/interface.cmp ]]; then 2000 echo | tee -a $LOGFILE >> $mail_msg_file 2001 tee -a $LOGFILE < \ 2002 $elf_ddir/interface.cmp \ 2003 >> $mail_msg_file 2004 build_extras_ok=n 2005 fi 2006 else 2007 echo "baseline not available. comparison" \ 2008 "skipped" | \ 2009 tee -a $LOGFILE >> $mail_msg_file 2010 fi 2011 2012 fi 2013 fi 2014 2015 if [[ $r_FLAG = y ]]; then 2016 echo "\n==== Check ELF runtime attributes ====\n" | \ 2017 tee -a $LOGFILE >> $mail_msg_file 2018 2019 # If we're doing a DEBUG build the proto area will be left 2020 # with debuggable objects, thus don't assert -s. 2021 if [[ $D_FLAG = y ]]; then 2022 rtime_sflag="" 2023 else 2024 rtime_sflag="-s" 2025 fi 2026 check_rtime -i -m -v $rtime_sflag -o -w $elf_ddir \ 2027 -D object_list -f object_list -E runtime.err \ 2028 -I runtime.attr.raw 2029 if (( $? != 0 )); then 2030 build_extras_ok=n 2031 fi 2032 2033 # check_rtime -I output needs to be sorted in order to 2034 # compare it to that from previous builds. 2035 sort $elf_ddir/runtime.attr.raw > $elf_ddir/runtime.attr 2036 rm $elf_ddir/runtime.attr.raw 2037 2038 # Report errors 2039 if [[ -s $elf_ddir/runtime.err ]]; then 2040 tee -a $LOGFILE < $elf_ddir/runtime.err \ 2041 >> $mail_msg_file 2042 build_extras_ok=n 2043 fi 2044 2045 # If there is an ELF-data directory from a previous build, 2046 # then diff the attr files. These files contain information 2047 # about dependencies, versioning, and runpaths. There is some 2048 # overlap with the ABI checking done above, but this also 2049 # flushes out non-ABI interface differences along with the 2050 # other information. 2051 echo "\n==== Diff ELF runtime attributes" \ 2052 "(since last build) ====\n" | \ 2053 tee -a $LOGFILE >> $mail_msg_file >> $mail_msg_file 2054 2055 if [[ -f $elf_ddir.ref/runtime.attr ]]; then 2056 diff $elf_ddir.ref/runtime.attr \ 2057 $elf_ddir/runtime.attr \ 2058 >> $mail_msg_file 2059 fi 2060 fi 2061 2062 # If -u set, copy contents of ELF-data.$MACH to the parent workspace. 2063 if [[ "$u_FLAG" = "y" ]]; then 2064 p_elf_ddir=$PARENT_WS/usr/src/ELF-data.$MACH 2065 2066 # If parent lacks the ELF-data.$MACH directory, create it 2067 if [[ ! -d $p_elf_ddir ]]; then 2068 staffer mkdir -p $p_elf_ddir 2069 fi 2070 2071 # These files are used asynchronously by other builds for ABI 2072 # verification, as above for the -A option. As such, we require 2073 # the file replacement to be atomic. Copy the data to a temp 2074 # file in the same filesystem and then rename into place. 2075 ( 2076 cd $elf_ddir 2077 for elf_dfile in *; do 2078 staffer cp $elf_dfile \ 2079 ${p_elf_ddir}/${elf_dfile}.new 2080 staffer mv -f ${p_elf_ddir}/${elf_dfile}.new \ 2081 ${p_elf_ddir}/${elf_dfile} 2082 done 2083 ) 2084 fi 2085fi 2086 2087# DEBUG lint of kernel begins 2088 2089if [ "$i_CMD_LINE_FLAG" = "n" -a "$l_FLAG" = "y" ]; then 2090 if [ "$LINTDIRS" = "" ]; then 2091 # LINTDIRS="$SRC/uts y $SRC/stand y $SRC/psm y" 2092 LINTDIRS="$SRC y" 2093 fi 2094 set $LINTDIRS 2095 while [ $# -gt 0 ]; do 2096 dolint $1 $2; shift; shift 2097 done 2098else 2099 echo "\n==== No '$MAKE lint' ====\n" >> $LOGFILE 2100fi 2101 2102# "make check" begins 2103 2104if [ "$i_CMD_LINE_FLAG" = "n" -a "$C_FLAG" = "y" ]; then 2105 # remove old check.out 2106 rm -f $SRC/check.out 2107 2108 rm -f $SRC/check-${MACH}.out 2109 cd $SRC 2110 $MAKE -ek check ROOT="$checkroot" 2>&1 | tee -a $SRC/check-${MACH}.out \ 2111 >> $LOGFILE 2112 echo "\n==== cstyle/hdrchk errors ====\n" >> $mail_msg_file 2113 2114 grep ":" $SRC/check-${MACH}.out | 2115 egrep -v "Ignoring unknown host" | \ 2116 sort | uniq | tee $TMPDIR/check_errors >> $mail_msg_file 2117 2118 if [[ -s $TMPDIR/check_errors ]]; then 2119 build_extras_ok=n 2120 fi 2121else 2122 echo "\n==== No '$MAKE check' ====\n" >> $LOGFILE 2123fi 2124 2125echo "\n==== Find core files ====\n" | \ 2126 tee -a $LOGFILE >> $mail_msg_file 2127 2128find $abssrcdirs -name core -a -type f -exec file {} \; | \ 2129 tee -a $LOGFILE >> $mail_msg_file 2130 2131if [ "$f_FLAG" = "y" -a "$build_ok" = "y" ]; then 2132 echo "\n==== Diff unreferenced files (since last build) ====\n" \ 2133 | tee -a $LOGFILE >>$mail_msg_file 2134 rm -f $SRC/unref-${MACH}.ref 2135 if [ -f $SRC/unref-${MACH}.out ]; then 2136 mv $SRC/unref-${MACH}.out $SRC/unref-${MACH}.ref 2137 fi 2138 2139 findunref -S $SCM_TYPE -t $SRC/.build.tstamp -s usr $CODEMGR_WS \ 2140 ${TOOLS}/findunref/exception_list 2>> $mail_msg_file | \ 2141 sort > $SRC/unref-${MACH}.out 2142 2143 if [ ! -f $SRC/unref-${MACH}.ref ]; then 2144 cp $SRC/unref-${MACH}.out $SRC/unref-${MACH}.ref 2145 fi 2146 2147 diff $SRC/unref-${MACH}.ref $SRC/unref-${MACH}.out >>$mail_msg_file 2148fi 2149 2150# Verify that the usual lists of files, such as exception lists, 2151# contain only valid references to files. If the build has failed, 2152# then don't check the proto area. 2153CHECK_PATHS=${CHECK_PATHS:-y} 2154if [ "$CHECK_PATHS" = y -a "$N_FLAG" != y ]; then 2155 echo "\n==== Check lists of files ====\n" | tee -a $LOGFILE \ 2156 >>$mail_msg_file 2157 arg=-b 2158 [ "$build_ok" = y ] && arg= 2159 checkpaths $arg $checkroot > $SRC/check-paths.out 2>&1 2160 if [[ -s $SRC/check-paths.out ]]; then 2161 tee -a $LOGFILE < $SRC/check-paths.out >> $mail_msg_file 2162 build_extras_ok=n 2163 fi 2164fi 2165 2166if [ "$M_FLAG" != "y" -a "$build_ok" = y ]; then 2167 echo "\n==== Impact on file permissions ====\n" \ 2168 >> $mail_msg_file 2169 2170 abspkg= 2171 for d in $abssrcdirs; do 2172 if [ -d "$d/pkg" ]; then 2173 abspkg="$abspkg $d" 2174 fi 2175 done 2176 2177 if [ -n "$abspkg" ]; then 2178 for d in "$abspkg"; do 2179 ( cd $d/pkg ; $MAKE -e pmodes ) >> $mail_msg_file 2180 done 2181 fi 2182fi 2183 2184if [ "$w_FLAG" = "y" -a "$build_ok" = "y" ]; then 2185 if [[ "$MULTI_PROTO" = no || "$D_FLAG" = y ]]; then 2186 do_wsdiff DEBUG $ROOT.prev $ROOT 2187 fi 2188 2189 if [[ "$MULTI_PROTO" = yes && "$F_FLAG" = n ]]; then 2190 do_wsdiff non-DEBUG $ROOT-nd.prev $ROOT-nd 2191 fi 2192fi 2193 2194END_DATE=`date` 2195echo "==== Nightly $maketype build completed: $END_DATE ====" | \ 2196 tee -a $LOGFILE >> $build_time_file 2197 2198typeset -i10 hours 2199typeset -Z2 minutes 2200typeset -Z2 seconds 2201 2202elapsed_time=$SECONDS 2203((hours = elapsed_time / 3600 )) 2204((minutes = elapsed_time / 60 % 60)) 2205((seconds = elapsed_time % 60)) 2206 2207echo "\n==== Total build time ====" | \ 2208 tee -a $LOGFILE >> $build_time_file 2209echo "\nreal ${hours}:${minutes}:${seconds}" | \ 2210 tee -a $LOGFILE >> $build_time_file 2211 2212if [ "$u_FLAG" = "y" -a "$f_FLAG" = "y" -a "$build_ok" = "y" ]; then 2213 staffer cp ${SRC}/unref-${MACH}.out $PARENT_WS/usr/src/ 2214 2215 # 2216 # Produce a master list of unreferenced files -- ideally, we'd 2217 # generate the master just once after all of the nightlies 2218 # have finished, but there's no simple way to know when that 2219 # will be. Instead, we assume that we're the last nightly to 2220 # finish and merge all of the unref-${MACH}.out files in 2221 # $PARENT_WS/usr/src/. If we are in fact the final ${MACH} to 2222 # finish, then this file will be the authoritative master 2223 # list. Otherwise, another ${MACH}'s nightly will eventually 2224 # overwrite ours with its own master, but in the meantime our 2225 # temporary "master" will be no worse than any older master 2226 # which was already on the parent. 2227 # 2228 2229 set -- $PARENT_WS/usr/src/unref-*.out 2230 cp "$1" ${TMPDIR}/unref.merge 2231 shift 2232 2233 for unreffile; do 2234 comm -12 ${TMPDIR}/unref.merge "$unreffile" > ${TMPDIR}/unref.$$ 2235 mv ${TMPDIR}/unref.$$ ${TMPDIR}/unref.merge 2236 done 2237 2238 staffer cp ${TMPDIR}/unref.merge $PARENT_WS/usr/src/unrefmaster.out 2239fi 2240 2241# 2242# All done save for the sweeping up. 2243# (whichever exit we hit here will trigger the "cleanup" trap which 2244# optionally sends mail on completion). 2245# 2246if [[ "$build_ok" == "y" ]]; then 2247 if [[ "$W_FLAG" == "y" || "$build_extras_ok" == "y" ]]; then 2248 exit 0 2249 fi 2250fi 2251 2252exit 1 2253