1#!/bin/ksh 2# 3# CDDL HEADER START 4# 5# The contents of this file are subject to the terms of the 6# Common Development and Distribution License (the "License"). 7# You may not use this file except in compliance with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23# Copyright 2007 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26#From: "@(#)Install 1.56 96/10/11 SMI" 27#ident "%Z%%M% %I% %E% SMI" 28# 29# Author: Jeff Bonwick 30# 31# Please report any bugs to bonwick@eng. 32# 33# How Install works: 34# 35# Install performs the following steps: 36# 37# 1. Get the list of modules, configuration files, and links 38# that are desired. 39# 40# 2. Create the requested subset of /kernel in Install's temp space 41# (/tmp/Install.username by default.) 42# 43# 3. Create a tar file (/tmp/Install.username/Install.tar) based on (3). 44# 45# 4. If -n was specified, exit. If a target was specified using -T, 46# rcp the tarfile to the target and exit. If a target was specified 47# using -t, rsh to the target machine and untar the tarfile in the 48# target directory. 49# 50# If any of these steps fail, Install will give you an error message and, 51# in most cases, suggest corrective measures. Then, you can recover the 52# install with "Install -R". (This is not required; it's just faster than 53# starting from scratch.) 54# 55# One final comment: Unfortunately, tar and I disagree on what 56# constitutes a fatal error. (tar -x will exit 0 even if it can't write 57# anything in the current directory.) Thus, I am reduced to grepping stderr 58# for (what I consider) fatal and nonfatal error messages. If you run into 59# a situation where this doesn't behave the way you think it should (either 60# an "Install failed" message after a successful install, or an "Install 61# complete" message after it bombs), please let me know. 62 63# 64# The CDPATH variable causes ksh's `cd' builtin to emit messages to stdout 65# under certain circumstances, which can really screw things up; unset it. 66# 67unset CDPATH 68 69INSTALL=`basename $0` 70DOT=`pwd` 71 72TRAILER="Install.$LOGNAME" 73INSTALL_STATE=${INSTALL_STATE-$HOME/.Install.state} 74export INSTALL_STATE 75INSTALL_DIR=${INSTALL_DIR-/tmp/$TRAILER} 76if [ "`basename $INSTALL_DIR`" != "$TRAILER" ]; then 77 INSTALL_DIR="$INSTALL_DIR/$TRAILER" 78fi 79export INSTALL_DIR 80INSTALL_LIB=${INSTALL_LIB-$HOME/LibInstall} 81export INSTALL_LIB 82INSTALL_RC=${INSTALL_RC-$HOME/.Installrc} 83export INSTALL_RC 84INSTALL_CP=${INSTALL_CP-"cp -p"} 85export INSTALL_CP 86INSTALL_RCP=${INSTALL_RCP-"rcp -p"} 87export INSTALL_RCP 88 89STATE=0 90 91DEFAULT_OPTIONS="-naq" 92GLOM=no 93GLOMNAME=kernel 94IMPL="default" 95WANT32="yes" 96WANT64="yes" 97 98modlist=/tmp/modlist$$ 99# dummy directory for make state files. 100modstatedir=/tmp/modstate$$ 101 102trap 'fail "User Interrupt" "You can resume by typing \"$INSTALL -R\""' 1 2 3 15 103 104usage() { 105 echo "" 106 echo $1 107 echo ' 108Usage: Install [ -w workspace ] 109 [ -s srcdir (default: usr/src/uts) ] 110 [ -k karch (e.g. sun4u; required if not deducible from pwd) ] 111 [ -t target (extract tar file on target, e.g. user@machine:/) ] 112 [ -T target (copy tar file to target, e.g. user@machine:/tmp) ] 113 [ -n (no target, just create tar file in /tmp (default)) ] 114 [ -u (install unix only) ] 115 [ -m (install modules only) ] 116 [ -a (install everything, i.e. unix + modules (default)) ] 117 [ -v (verbose output) ] 118 [ -V (REALLY verbose output) ] 119 [ -q (quiet (default)) ] 120 [ -c (clean up (remove temp files) when done (default) ] 121 [ -p (preserve temp files -- useful for debugging) ] 122 [ -L (library create: put tarfile in $INSTALL_LIB/env.karch) ] 123 [ -l lib (library extract: use $INSTALL_LIB/lib as source) ] 124 [ -D libdir (default: $HOME/LibInstall) ] 125 [ -d tempdir (Install work area (default: /tmp)) ] 126 [ -G glomname (put all files under platform/karch/glomname) ] 127 [ -i impl (e.g. sunfire; recommended with -G) ] 128 [ -x (update /etc/name_to_major et al) ] 129 [ -X (do not update /etc/name_to_major et al (default)) ] 130 [ -P (update /etc/path_to_inst -- generally not advisable) ] 131 [ -h (help -- prints this message) ] 132 [ -R (recover a previous Install) ] 133 [ -o objdir (object directory - either obj or debug (the default)) ] 134 [ -K (do not copy kmdb) ] 135 [ -3 32-bit modules only ] 136 [ -6 64-bit modules only ] 137 [ list of modules to install ] 138 139For full details: 140 141 man -M /ws/on297-gate/public/docs Install 142' 143 exit 1 144} 145 146# 147# Save the current state of Install 148# 149 150save_state() { 151 rm -f $INSTALL_STATE 152 (echo "# State of previous Install 153TARGET=$TARGET 154ENV_PATH=$ENV_PATH 155ENV_NAME=$ENV_NAME 156KARCH=$KARCH 157UTS=$UTS 158INSTALL_DIR=$INSTALL_DIR 159INSTALL_LIB=$INSTALL_LIB 160IMODE=$IMODE 161LIBCREATE=$LIBCREATE 162LIBSRC=$LIBSRC 163VERBOSE=$VERBOSE 164CLEANUP=$CLEANUP 165GLOM=$GLOM 166GLOMNAME=$GLOMNAME 167KMDB=$KMDB 168files='$files' 169STATE=$STATE" >$INSTALL_STATE) || verbose "Warning: cannot save state" 170} 171 172# 173# Restore the previous state of Install 174# 175 176restore_state() { 177 test -s $INSTALL_STATE || fail "Can't find $INSTALL_STATE" 178 eval "`cat $INSTALL_STATE`" 179} 180 181# 182# Install failed -- print error messages and exit 2 183# 184 185fail() { 186 save_state 187 # 188 # We might have gotten here via a trap. So wait for any 189 # children (especially "make modlist") to exit before giving 190 # the error message or cleaning up. 191 # 192 wait 193 while [ $# -gt 0 ] 194 do 195 echo $1 196 shift 197 done 198 rm -rf $modstatedir 199 rm -f $modlist 200 echo "Install failed" 201 exit 2 202} 203 204# 205# Echo a string in verbose mode only 206# 207 208verbose() { 209 test "$VERBOSE" != "q" && echo $1 210} 211 212# 213# hack for tmpfs bug -- remove files gradually 214# 215 216remove_dir() { 217 test -d $1 || return 218 local_dot=`pwd` 219 cd $1 220 touch foo 221 rm -f `find . -type f -print` 222 cd $local_dot 223 rm -rf $1 224} 225 226# 227# Create a directory if it doesn't already exist. 228# mkdir will provide an error message, so don't provide an additional 229# message. 230# 231 232tstmkdir() { 233 [ -d $1 ] || mkdir -p $1 || fail 234} 235 236# 237# Patch up target directories for glommed kernel. 238# usage: fixglom listfile glomname 239# 240 241fixglom() { 242 nawk \ 243 -v glomname=$2 \ 244 -v karch=$KARCH ' 245 $1 == "MOD" || $1 == "SYMLINK" { 246 sub(/^platform.*kernel/, "platform/" karch "/" glomname, $3) 247 sub(/^kernel/, "platform/" karch "/" glomname, $3) 248 sub(/^usr.kernel/, "platform/" karch "/" glomname, $3) 249 print 250 } 251 $1 == "LINK" { 252 sub(/^platform.*kernel/, "platform/" karch "/" glomname, $2) 253 sub(/^kernel/, "platform/" karch "/" glomname, $2) 254 sub(/^usr.kernel/, "platform/" karch "/" glomname, $2) 255 sub(/^platform.*kernel/, "platform/" karch "/" glomname, $4) 256 sub(/^kernel/, "platform/" karch "/" glomname, $4) 257 sub(/^usr.kernel/, "platform/" karch "/" glomname, $4) 258 print 259 } 260 $1 == "CONF" { 261 sub(/^platform.*kernel/, "platform/" karch "/" glomname, $2) 262 sub(/^kernel/, "platform/" karch "/" glomname, $2) 263 sub(/^usr.kernel/, "platform/" karch "/" glomname, $2) 264 print 265 } 266 ' $1 > $1.new 267 mv $1.new $1 268} 269 270# 271# Remove entries from 272# usage: filtimpl listfile implname 273# 274 275filtimpl() { 276 nawk \ 277 -v impl=$2 ' 278 $1 == "MOD" || $1 == "SYMLINK" { 279 if ($5 == "all" || $5 == impl) 280 print 281 } 282 $1 == "CONF" { 283 if ($4 == "all" || $4 == impl) 284 print 285 } 286 $1 == "LINK" { 287 if ($6 == "all" || $6 == impl) 288 print 289 } 290 ' $1 > $1.new 291 mv $1.new $1 292} 293 294# 295# Filter the module list to match the user's request. 296# Usage: filtmod listfile modules 297# 298filtmod() { 299 nawk -v reqstring="$2" ' 300 function modmatch(modname) { 301 if (reqstring == "All") { 302 return (1) 303 } else if (reqstring == "Modules") { 304 if (modname != "unix" && modname != "genunix") 305 return (1) 306 } else { 307 if (modname in reqmods) 308 return (1) 309 } 310 return (0) 311 } 312 BEGIN { 313 # 314 # The split call creates indexes 1, 2, 3, ... We want 315 # the module names as indexes. 316 # 317 split(reqstring, tmpmods) 318 for (i in tmpmods) 319 reqmods[tmpmods[i]] = 1 320 } 321 $1 == "MOD" { 322 if (modmatch($2)) 323 print 324 } 325 $1 == "CONF" { 326 if (modmatch($5)) 327 print 328 } 329 $1 == "SYMLINK" { 330 if (modmatch($6)) 331 print 332 } 333 $1 == "LINK" { 334 if (modmatch($3)) 335 print 336 } 337 ' $1 > $1.new 338 mv $1.new $1 339} 340 341# 342# Copy a module, or create a link, as needed. 343# See $SRC/uts/Makefile.targ ($(MODLIST_DEPS) target) for the format 344# of the different input lines. 345# 346 347copymod() { 348 case $1 in 349 MOD) 350 targdir=$INSTALL_FILES/$3 351 tstmkdir $targdir 352 target=$targdir/$2 353 verbose "$INSTALL_CP $6/${OBJD}$4/$2 $target" 354 $INSTALL_CP $6/${OBJD}$4/$2 $target || \ 355 fail "can't create $target" 356 ;; 357 SYMLINK) 358 targdir=$INSTALL_FILES/$3 359 tstmkdir $targdir 360 target=$targdir/$4 361 rm -f $target 362 verbose "ln -s $2 $target" 363 ln -s $2 $target || fail "can't create $target" 364 ;; 365 LINK) 366 targdir=$INSTALL_FILES/$4 367 tstmkdir $targdir 368 target=$targdir/$5 369 rm -f $target 370 verbose "ln $INSTALL_FILES/$2/$3 $target" 371 ln $INSTALL_FILES/$2/$3 $target || fail "can't create $target" 372 ;; 373 CONF) 374 target=$INSTALL_FILES/$2 375 tstmkdir `dirname $target` 376 conffile=`basename $2` 377 verbose "$INSTALL_CP $3/$conffile $target" 378 $INSTALL_CP $3/$conffile $target 379 ;; 380 *) 381 fail "unrecognized modlist entry: $*" 382 ;; 383 esac 384} 385 386# 387# Copy kernel modules to $INSTALL_DIR 388# 389 390copy_kernel() { 391 392 case $KARCH in 393 sun4*) ISA=sparc; MACH=sparc ;; 394 i86*) ISA=intel; MACH=i386 ;; 395 *) fail "${KARCH}: invalid kernel architecture";; 396 esac 397 export MACH 398 399 if [ "$GLOM" = "no" ]; then 400 verbose "Source = $UTS, ISA = $ISA, kernel = $KARCH" 401 else 402 verbose "Source = $UTS, ISA = $ISA, kernel = $KARCH, impl = $IMPL" 403 fi 404 405 test -d $KARCH || fail "${KARCH}: invalid kernel architecture" 406 test -d $ISA || fail "${ISA}: invalid instruction set architecture" 407 408 tstmkdir $INSTALL_FILES 409 rm -rf $modstatedir 410 tstmkdir $modstatedir 411 export MODSTATE=$modstatedir/state 412 413 # 414 # Figure out which "make" to use. dmake is faster than serial 415 # make, but dmake 7.3 has a bug that causes it to lose log 416 # output, which means the modlist might be incomplete. 417 # 418 make=dmake 419 dmvers=`$make -version` 420 if [ $? -ne 0 ]; then 421 make=/usr/ccs/bin/make 422 elif [[ $dmvers = *Distributed?Make?7.3* ]]; then 423 unset make 424 searchpath="/ws/onnv-tools/SUNWspro/SOS10/bin 425 /opt/SUNWspro/SOS10/bin 426 /opt/SUNWspro/bin" 427 for dmpath in $searchpath; do 428 verbose "Trying $dmpath/dmake" 429 if [ -x $dmpath/dmake ]; then 430 dmvers=`$dmpath/dmake -version` 431 if [[ $dmvers != *Distributed?Make?7.3* ]]; then 432 make="$dmpath/dmake" 433 break; 434 fi 435 fi 436 done 437 if [ -z $make ]; then 438 make=/usr/ccs/bin/make 439 echo "Warning: dmake 7.3 doesn't work with Install;" \ 440 "using $make" 441 fi 442 fi 443 444 # 445 # Get a list of all modules, configuration files, and links 446 # that we might want to install. 447 # 448 verbose "Building module list..." 449 (cd $KARCH; MAKEFLAGS=e $make -K $MODSTATE modlist.karch) | \ 450 egrep "^MOD|^CONF|^LINK|^SYMLINK" > $modlist 451 [ $VERBOSE = "V" ] && cat $modlist 452 if [ "$GLOM" = "yes" ]; then 453 fixglom $modlist $GLOMNAME 454 filtimpl $modlist $IMPL 455 fi 456 if [[ -n "$files" && "$files" != All ]]; then 457 filtmod $modlist "$files" 458 fi 459 460 # 461 # Copy modules and create links. For architectures with both 462 # 32- and 64-bit modules, we'll likely have duplicate 463 # configuration files, so do those after filtering out the 464 # duplicates. 465 # 466 verbose "Copying files to ${INSTALL_FILES}..." 467 468 # 469 # The IFS is reset to the newline character so we can buffer the 470 # output of grep without piping it directly to copymod, otherwise 471 # if fail() is called, then it will deadlock in fail()'s wait call 472 # 473 OIFS="$IFS" 474 IFS=" 475 " 476 set -- `grep -v "^CONF" $modlist`; 477 IFS="$OIFS" 478 for onemod in "$@"; do 479 copymod $onemod 480 done 481 482 OIFS="$IFS" 483 IFS=" 484 " 485 set -- `grep "^CONF" $modlist | sort | uniq`; 486 IFS="$OIFS" 487 for onemod in "$@"; do 488 copymod $onemod 489 done 490 491 # 492 # Add the glommed kernel name to the root archive 493 # 494 if [[ $GLOM == "yes" ]]; 495 then 496 filelist="$INSTALL_FILES/etc/boot/solaris/filelist.ramdisk" 497 mkdir -p `dirname $filelist` 498 echo "platform/$KARCH/$GLOMNAME" >$filelist 499 fi 500 501 STATE=1 # all kernel modules copied correctly 502 save_state 503} 504 505kmdb_copy() { 506 typeset src="$1" 507 typeset destdir="$2" 508 509 if [[ ! -d $dest ]] ; then 510 [[ $VERBOSE != "q" ]] && echo "mkdir -p $destdir" 511 512 mkdir -p $destdir || fail "failed to create $destdir" 513 fi 514 515 [[ $VERBOSE != "q" ]] && echo "cp $src $destdir" 516 517 cp $src $destdir || fail "failed to copy $src to $destdir" 518} 519 520kmdb_copy_machkmods() { 521 typeset modbase="$1" 522 typeset destdir="$2" 523 typeset dir= 524 typeset kmod= 525 526 [[ ! -d $modbase ]] && return 527 528 for dir in $(find $modbase -name kmod) ; do 529 set -- $(echo $dir |tr '/' ' ') 530 531 [[ $# -lt 2 ]] && fail "invalid mach kmod dir $dir" 532 533 shift $(($# - 2)) 534 kmod=$1 535 536 [[ ! -f $dir/$kmod ]] && continue 537 538 kmdb_copy $dir/$kmod $destdir 539 done 540} 541 542kmdb_copy_karchkmods() { 543 typeset modbase="$1" 544 typeset destdir="$2" 545 typeset bitdir="$3" 546 typeset dir= 547 typeset kmod= 548 typeset karch= 549 550 [[ ! -d $modbase ]] && return 551 552 for dir in $(find $modbase -name kmod) ; do 553 set -- $(echo $dir | tr '/' ' ') 554 555 [[ $# -lt 3 ]] && fail "invalid karch kmod dir $dir" 556 557 shift $(($# - 3)) 558 kmod=$1 559 bdir=$2 560 561 [[ $bdir != $bitdir ]] && continue 562 [[ ! -f $dir/$1 ]] && continue 563 564 kmdb_copy $dir/$kmod $destdir 565 done 566} 567 568kmdb_copy_kmdbmod() { 569 typeset kmdbpath="$1" 570 typeset destdir="$2" 571 572 [[ ! -f $kmdbpath ]] && return 1 573 574 kmdb_copy $kmdbpath $destdir 575 576 return 0 577} 578 579copy_kmdb() { 580 typeset kmdbtgtdir=$INSTALL_FILES/platform/$KARCH/$GLOMNAME/misc 581 typeset bitdirs= 582 typeset isadir= 583 typeset b64srcdir= 584 typeset b64tgtdir= 585 typeset b32srcdir= 586 typeset b32tgtdir= 587 typeset machdir= 588 typeset platdir= 589 590 if [[ $KMDB = "no" || ! -d $SRC/cmd/mdb ]] ; then 591 # The kmdb copy was suppressed or the workspace doesn't contain 592 # the mdb subtree. Either way, there's nothing to do. 593 STATE=2 594 save_state 595 return 596 fi 597 598 if [[ $(mach) = "i386" ]] ; then 599 isadir="intel" 600 b64srcdir="amd64" 601 b64tgtdir="amd64" 602 b32srcdir="ia32" 603 b32tgtdir="." 604 else 605 isadir="sparc" 606 b64srcdir="v9" 607 b64tgtdir="sparcv9" 608 b32srcdir="v7" 609 b32tgtdir="." 610 fi 611 612 typeset foundkmdb=no 613 typeset kmdbpath= 614 typeset destdir= 615 616 platdir=$INSTALL_FILES/platform/$KARCH/$GLOMNAME 617 if [[ $GLOM = "yes" ]] ; then 618 machdir=$platdir 619 else 620 machdir=$INSTALL_FILES/kernel 621 fi 622 623 srctrees=$SRC 624 if [[ -d $SRC/../closed && "$CLOSED_IS_PRESENT" != no ]]; then 625 srctrees="$srctrees $SRC/../closed" 626 fi 627 if [[ $WANT64 = "yes" ]] ; then 628 # kmdbmod for sparc and x86 are built and installed 629 # in different places 630 if [[ $(mach) = "i386" ]] ; then 631 kmdbpath=$SRC/cmd/mdb/$isadir/$b64srcdir/kmdb/kmdbmod 632 destdir=$machdir/misc/$b64tgtdir 633 else 634 kmdbpath=$SRC/cmd/mdb/$KARCH/$b64srcdir/kmdb/kmdbmod 635 destdir=$platdir/misc/$b64tgtdir 636 fi 637 638 if kmdb_copy_kmdbmod $kmdbpath $destdir ; then 639 foundkmdb="yes" 640 641 for tree in $srctrees; do 642 kmdb_copy_machkmods \ 643 $tree/cmd/mdb/$isadir/$b64srcdir \ 644 $machdir/kmdb/$b64tgtdir 645 kmdb_copy_karchkmods $tree/cmd/mdb/$KARCH \ 646 $platdir/kmdb/$b64tgtdir $b64srcdir 647 done 648 fi 649 fi 650 651 if [[ $WANT32 = "yes" ]] ; then 652 kmdbpath=$SRC/cmd/mdb/$isadir/$b32srcdir/kmdb/kmdbmod 653 destdir=$machdir/misc/$b32tgtdir 654 655 if kmdb_copy_kmdbmod $kmdbpath $destdir ; then 656 foundkmdb="yes" 657 658 for tree in $srctrees; do 659 kmdb_copy_machkmods \ 660 $tree/cmd/mdb/$isadir/$b32srcdir \ 661 $machdir/kmdb/$b32tgtdir 662 kmdb_copy_karchkmods $tree/cmd/mdb/$KARCH \ 663 $platdir/kmdb/$b32tgtdir $b32srcdir 664 done 665 fi 666 fi 667 668 # A kmdb-less workspace isn't fatal, but it is potentially problematic, 669 # as the changes made to uts may have altered something upon which kmdb 670 # depends. We will therefore remind the user that they haven't built it 671 # yet. 672 if [[ $foundkmdb != "yes" ]] ; then 673 echo "WARNING: kmdb isn't built, and won't be included" 674 fi 675 676 STATE=2 677 save_state 678 return 679} 680 681# 682# Make tarfile 683# 684 685make_tarfile() { 686 echo "Creating tarfile $TARFILE" 687 test -d $INSTALL_FILES || fail "Can't find $INSTALL_FILES" 688 cd $INSTALL_FILES 689 rm -f $TARFILE files 690 691 # We don't want to change the permissions or ownership of pre-existing 692 # directories on the target machine, so we're going to take care to 693 # avoid including directories in the tarfile. On extraction, tar won't 694 # modify pre-existing directories, and will create non-existent ones as 695 # the user doing the extraction. 696 find . ! -type d -print |fgrep -vx './files' >files 697 tar cf $TARFILE -I files || fail "Couldn't create tarfile $TARFILE" 698 STATE=3 699} 700 701# 702# Routines to copy files to the target machine 703# 704 705remote_fail() { 706 fail "" "$1" "" \ 707 "Make sure that $TARGET_MACHINE is up." \ 708"Check .rhosts in the home directory of user $TARGET_USER on $TARGET_MACHINE." \ 709 "Check /etc/hosts.equiv, /etc/passwd, and /etc/shadow." \ 710 "Change permissions on $TARGET_MACHINE as necessary." \ 711 "Then, use \"$INSTALL -R\" to resume the install." "" 712} 713 714remote_install() { 715 if [ "$IMODE" = "n" ]; then 716 STATE=4 717 return 0 718 fi 719 test -s $TARFILE || fail "$TARFILE missing or empty" 720 verbose "Installing system on $TARGET" 721 test -d $INSTALL_DIR || fail "Can't find $INSTALL_DIR" 722 cd $INSTALL_DIR 723 rm -f errors fatal nonfatal 724 if [ "$IMODE" = "T" ]; then 725 EMESG="Can't rcp to $TARGET" 726 touch errors 727 sh -e${SHV}c "$INSTALL_RCP $TARFILE $TARGET/Install.tar" 728 else 729 EMESG="Can't rsh to $TARGET_MACHINE" 730 rsh -l $TARGET_USER $TARGET_MACHINE \ 731 "(cd $TARGET_DIR; /usr/bin/tar x${V}f -)" \ 732 <$TARFILE 2>errors 733 fi 734 test $? -ne 0 && remote_fail "$EMESG" 735 cd $INSTALL_DIR 736 egrep "set time|warning|blocksize" errors >nonfatal 737 egrep -v "set time|warning|blocksize" errors >fatal 738 if [ -s fatal ]; then 739 echo "Fatal errors from rsh:" 740 cat fatal 741 remote_fail "Can't install on $TARGET_MACHINE" 742 fi 743 if [ -s nonfatal -a "$VERBOSE" != "q" ]; then 744 echo "Non-fatal errors from rsh:" 745 cat nonfatal 746 fi 747 rm -f fatal nonfatal errors 748 test "$IMODE" = "T" && echo "Files can be extracted on \ 749$TARGET_MACHINE using 'tar xvf $TARGET_DIR/Install.tar'" 750 STATE=4 751} 752 753okexit() { 754 cd /tmp 755 test "$CLEANUP" = c && remove_dir $INSTALL_DIR 756 save_state 757 rm -rf $modstatedir 758 rm -f $modlist 759 verbose "Install complete" 760 exit 0 761} 762 763# 764# Process options 765# 766 767RCOPTS="" 768LIBCREATE="no" 769LIBSRC="" 770PFLAG=0 771ENV_PATH=$CODEMGR_WS 772OBJD="debug" 773KMDB="yes" 774 775test -s $INSTALL_RC && RCOPTS=`cat $INSTALL_RC` 776set $INSTALL $DEFAULT_OPTIONS $RCOPTS $* 777shift 778 779while getopts acd:D:G:hi:k:Kl:Lmno:pPqRs:t:T:uvVw:xX36 opt 780do 781 case $opt in 782 w) ENV_PATH="$OPTARG"; SRC="$ENV_PATH/usr/src";; 783 s) UTS="$OPTARG";; 784 k) KARCH="$OPTARG";; 785 t|T) TARGET="$OPTARG"; IMODE=$opt; CLEANUP="c";; 786 n) TARGET=""; IMODE="n"; CLEANUP="p";; 787 u) files="unix genunix";; 788 m) files="Modules";; 789 a) files="All";; 790 v|V|q) VERBOSE=$opt;; 791 c|p) CLEANUP=$opt;; 792 L) LIBCREATE="yes"; CLEANUP="c";; 793 l) LIBSRC="$OPTARG";; 794 D) INSTALL_LIB="$OPTARG";; 795 d) INSTALL_DIR="$OPTARG/$TRAILER";; 796 G) GLOM=yes; GLOMNAME="$OPTARG";; 797 X|x) echo "-$opt is obsolete; ignored";; 798 P) PFLAG=1;; 799 h) usage "${INSTALL}: installs unix and modules";; 800 R) x=$OPTIND; restore_state; OPTIND=$x;; 801 i) IMPL="$OPTARG";; 802 o) OBJD="$OPTARG";; 803 K) KMDB="no";; 804 3) WANT64="no";; 805 6) WANT32="no";; 806 \?) usage "Illegal option";; 807 esac 808done 809shift `expr $OPTIND - 1` 810 811ENV_NAME=`basename $ENV_PATH` 812 813# 814# The rest of the command line is a list of individual files to copy. 815# If non-null, this list overrides the -uma options. 816# 817 818if [[ $# -gt 0 ]] ; then 819 files="$*" 820 KMDB="no" 821fi 822 823case $VERBOSE in 824 v) V="v"; SHV="x";; 825 V) V="v"; SHV="x"; set -x;; 826 q) V=""; SHV="";; 827esac 828 829# 830# Create temp directory for Install's files 831# 832 833tstmkdir $INSTALL_DIR 834 835TARFILE=$INSTALL_DIR/Install.${KARCH}.tar 836INSTALL_FILES=$INSTALL_DIR/$KARCH 837 838# 839# Extract the target machine and target directory from a target of the 840# form [user@]machine:/dir . 841# 842 843if [ "$IMODE" != "n" ]; then 844 eval `echo $TARGET | nawk -F':' '{ 845 if (NF != 2 || !length($1) || !length($2)) 846 print "usage \"Invalid target\"" 847 m = $1; d = $2 848 if ($1 ~ /@/) { 849 k = split($1, f, "@"); 850 if (k != 2 || !length(f[1]) || !length (f[2])) 851 print "usage \"Invalid target\"" 852 u = f[1]; m = f[2] 853 } 854 print "TARGET_USER=" u ";" 855 print "TARGET_MACHINE=" m ";" 856 print "TARGET_DIR=" d ";" 857 }'` 858 if [ -z "$TARGET_USER" ]; then 859 TARGET_USER=$LOGNAME 860 fi 861fi 862 863# 864# Allow the use of library source or target for the install 865# 866 867if [ -n "$LIBSRC" ]; then 868 LIBSRC="`basename $LIBSRC .tar`.tar" 869 TARFILE=$INSTALL_LIB/$LIBSRC 870 test -s $TARFILE || fail "Can't find tarfile $TARFILE" 871 verbose "Installing from library tarfile $TARFILE" 872 STATE=3 873elif [ "$LIBCREATE" = "yes" ]; then 874 tstmkdir $INSTALL_LIB 875 TARFILE="$INSTALL_LIB/${ENV_NAME}.${KARCH}.tar" 876fi 877 878# 879# The next few lines allow recovery and activation with -R, 880# and library installs with -l. 881# 882 883[[ $STATE -eq 1 ]] && copy_kmdb 884[[ $STATE -eq 2 ]] && make_tarfile 885[[ $STATE -eq 3 ]] && remote_install 886[[ $STATE -eq 4 ]] && okexit 887 888save_state 889 890cd $DOT 891DOTDOT=`cd ..; pwd` 892 893# 894# Try to be smart: if DOTDOT ends in uts, then infer UTS and KARCH from DOT 895# Otherwise, if SRC is set, infer UTS = $SRC/uts. 896# 897 898if [ "`basename $DOTDOT`" = "uts" ]; then 899 UTS=$DOTDOT 900 KARCH=`basename $DOT` 901 if [ ! -n "$SRC" ]; then 902 SRC=`dirname $DOTDOT` 903 verbose "Setting SRC to $SRC" 904 fi 905 export SRC 906fi 907 908if [ -z "$UTS" -a -n "$SRC" ]; then 909 UTS="${SRC}/uts" 910 test -n "$KARCH" || fail "no karch specified (e.g. -k sun4u)" 911fi 912 913if [ "$LIBCREATE" = "yes" ]; then 914 TARFILE=$INSTALL_LIB/${ENV_NAME}.${KARCH}.tar 915else 916 TARFILE=$INSTALL_DIR/Install.${KARCH}.tar 917fi 918INSTALL_FILES=$INSTALL_DIR/$KARCH 919save_state 920 921cd $DOT 922test -z "$UTS" && fail 'Cannot find kernel sources -- $SRC not set' 923test -d "$UTS" || fail "${UTS}: no such directory" 924 925# 926# Convert UTS into an absolute path. 927# 928 929cd $UTS 930UTS=`pwd` 931 932test "`basename $UTS`" = "uts" || \ 933 verbose "Warning: source path $UTS doesn't end in 'uts'" 934 935remove_dir $INSTALL_DIR/$KARCH 936rm -f $TARFILE 937 938copy_kernel # sets STATE=1 if successful 939copy_kmdb # sets STATE=2 if successful 940make_tarfile # sets STATE=3 if successful 941remote_install # sets STATE=4 if successful 942 943okexit 944