man/man7d/mpt_sas.7d

         te
 Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
 The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add
 the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 mpt_sas 7D "16 Jul 2009" "SunOS 5.11" "Devices"
 NAME
mpt_sas - SAS-2 host bus adapter driver
 SYNOPSIS
scsi@unit-address


 DESCRIPTION

The mpt_sas host bus adapter driver is a nexus driver that supports the
LSI SAS200x/2108 series of chips. These chips support SAS/SATA interfaces,
including tagged and untagged queuing, SATA 3G/SAS 3G/SAS 6G.
 "Configuration"

The mpt_sas driver is configured by defining properties in
mpt_sas.conf. These properties override the global SCSI settings. The
mpt_sas driver supports one modifiable property:

mpxio-disable

Solaris I/O multipathing is enabled or disabled on SAS devices with the
mpxio-disable property. Specifying mpxio-disable="no" activates I/O
multipathing, while mpxio-disable="yes" disables I/O multipathing.
Solaris I/O multipathing can be enabled or disabled on a per port basis. Per
port settings override the global setting for the specified ports.
The following example shows how to disable multipathing on port 0 whose parent
is /pci@0,0/pci8086,2940@1c/pci1000,72@0:
name="mpt_sas" parent="/pci@0,0/pci8086,2940@1c/pci1000,72@0"
mpxio-disable="yes";


 EXAMPLES

Example 1 Using the mpt_sas Configuration File to Disable MPXIO

Create a file called /kernel/drv/mpt_sas.conf and add the following line:

name="mpt_sas" parent="/pci@0,0/pci8086,2940@1c/pci1000,72@0"
mpxio-disable="yes";


 FILES

/kernel/drv/mpt_sas

32-bit ELF kernel module


/kernel/drv/sparcv9/mpt_sas

64-bit SPARC ELF kernel module


/kernel/drv/amd64/mpt_sas

64-bit x86 ELF kernel module


/kernel/drv/mpt_sas.conf

Optional configuration file


 ATTRIBUTES

See attributes(5) for a description of the following attributes:


ATTRIBUTE TYPEATTRIBUTE VALUE
ArchitectureSPARC, x86


 SEE ALSO

prtconf(1M), driver.conf(4), pci(4), attributes(5),
scsi_abort(9F), scsi_device(9S), scsi_extended_sense(9S),
scsi_inquiry(9S), scsi_hba_attach_setup(9F),
scsi_ifgetcap(9F), scsi_ifsetcap(9F), scsi_pkt(9S),
scsi_reset(9F), scsi_sync_pkt(9F), scsi_transport(9F),