man/man1m/svcadm.1m

         te
 Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved.
 The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 SVCADM 1M "May 9, 2008"
 NAME
svcadm - manipulate service instances
 SYNOPSIS

/usr/sbin/svcadm [-v] [-z zone] enable [-rst] {FMRI | pattern}...


/usr/sbin/svcadm [-v] [-z zone] disable [-st] {FMRI | pattern}...


/usr/sbin/svcadm [-v] [-z zone] restart {FMRI | pattern}...


/usr/sbin/svcadm [-v] [-z zone] refresh {FMRI | pattern}...


/usr/sbin/svcadm [-v] [-z zone] clear {FMRI | pattern}...


/usr/sbin/svcadm [-v] [-z zone] mark [-It] instance_state
 {FMRI | pattern}...


/usr/sbin/svcadm [-v] milestone [-d] milestone_FMRI


 DESCRIPTION

svcadm issues requests for actions on services executing within the
service management facility (see smf(5)). Actions for a service are
carried out by its assigned service restarter agent. The default service
restarter is svc.startd (see svc.startd(1M)).
 OPTIONS

The following options are supported:
-v

Print actions verbosely to standard output.


-z zone

Administer services in the specified zone. This option is only applicable
from the global zone, see zones(5).


 SUBCOMMANDS
 "Common Operations"

The subcommands listed below are used during the typical administration of a
service instance.

For subcommands taking one or more operands, if the operand specifies a service
(instead of a service instance), and that service has only a single instance,
svcadm operates on that instance. If an abbreviated FMRI (a fault
management resource identifier) or pattern matches more than one service, a
warning message is displayed and that operand is ignored. See smf(5).

In the case that the service has more than one instance, svcadm return a
non-zero exit status.
enable [-rst] {FMRI | pattern}. . .

Enables the service instances specified by the operands. For each service
instance, the assigned restarter will try to bring it to the online state. This
action requires permission to modify the "general" property group of the
service instance (see smf_security(5)).
If the -r option is specified, svcadm enables each service instance
and recursively enables its dependencies.
If the -s option is specified, svcadm enables each service instance
and then waits for each service instance to enter the online or
degraded state. svcadm will return early if it determines that the
service cannot reach these states without administrator intervention.
If the -t option is specified, svcadm temporarily enables each
service instance. Temporary enable only lasts until reboot. This action
requires permission to modify the "restarter_actions" property group of the
service instance (see smf_security(5)). By default, enable is
persistent across reboot.


disable [-st] {FMRI | pattern}. . .

Disables the service instance specified by the operands. For each service
instance, the assigned restarter will try to bring it to the disabled state.
This action requires permission to modify the "general" property group of the
service instance (see smf_security(5)).
If the -s option is specified, svcadm disables each service
instance and then waits for each service instance to enter the disabled state.
svcadm will return early if it determines that the service cannot reach
this state without administrator intervention.
If the -t option is specified, svcadm temporarily disables each
service instance. Temporary disable only lasts until reboot. This action
requires permission to modify the "restarter_actions" property group of the
service instance (see smf_security(5)). By default, disable is
persistent across reboot.


restart {FMRI | pattern}. . .

Requests that the service instances specified by the operands be restarted.
This action requires permission to modify the "restarter_actions" property
group of the service instance (see smf_security(5)).
This subcommand can restart only those services that are in the online or
degraded states, as those states are defined in smf(5).


refresh {FMRI | pattern}. . .

For each service instance specified by the operands, requests that the assigned
restarter update the service's running configuration snapshot with the values
from the current configuration. Some of these values take effect immediately
(for example, dependency changes). Other values do not take effect until the
next service restart. See the restarter and service documentation for
more information.
If the service is managed by svc.startd(1M), the refresh method
will be invoked if it exists to request the service reread its own
configuration. For other restarters, see the restarter documentation.
This action requires permission to modify the "restarter_actions" property
group of the service instance (see smf_security(5)).


clear {FMRI | pattern}. . .

For each service instance specified by the operands, if the instance is in the
maintenance state, signal to the assigned restarter that the service has
been repaired. If the instance is in the degraded state, request that the
assigned restarter take the service to the online state. This action
requires permission to modify the "restarter_actions" property group of the
service instance (see smf_security(5)).


 "Exceptional Operations"

The following subcommands are used for service development and temporary
administrative manipulation.
mark [-It] instance_state {FMRI |
pattern}. . .

If instance_state is "maintenance", then for each service specified by
the operands, svcadm requests that the assigned restarter place the
service in the maintenance state. See svc.startd(1M) and
inetd(1M) for a detailed description of the actions taken for each
restarter.
If instance_state is "degraded", then for services specified by the
operands in the online state, svcadm requests that the restarters
assigned to the services move them into the degraded state.
If the -I option is specified, the request is flagged as immediate.
The -t option is only valid for maintenance requests. When this option is
specified, the request is flagged as temporary, and its effect will only last
until the next reboot.


milestone [-d] milestone_FMRI

If milestone_FMRI is the keyword "none", all services other than the
master restarter, svc:/system/svc/restarter:default, will be temporarily
disabled.
If milestone_FMRI is the keyword "all", temporary enable and disable
requests for all services will be nullified.
If milestone_FMRI is one of the following:
svc:/milestone/single-user:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default


then temporary enable and disable requests for the indicated service and all
services it depends on (directly or indirectly) will be nullified. All other
services will be temporarily disabled.
Changing the system's current milestone with the "milestone" subcommand will
not change the current run level of the system. To change the system's run
level, invoke /sbin/init directly.
This action requires permission to modify the "options_ovr" property group of
the svc:/system/svc/restarter:default service instance (see
smf_security(5)).
The -d option immediately changes the milestone to the requested
milestone, as above. Additionally, it makes the specified milestone the default
boot milestone, which persists across reboot. The default milestone is defined
by the options/milestone property on the master restarter,
svc:/system/svc/restarter:default. If this property is absent, "all" is
the default. This action requires permission to modify the "options" property
group of the svc:/system/svc/restarter:default service instance (see
smf_security(5)).


 "Operands"

The following operands are supported:
FMRI

An FMRI that specifies one or more instances. FMRIs can be
abbreviated by specifying the instance name, or the trailing portion of the
service name. For example, given the FMRI:
svc:/network/smtp:sendmail


All the following are valid abbreviations:
sendmail
:sendmail
smtp
smtp:sendmail
network/smtp


While the following are invalid:
mail
network
network/smt


If the FMRI specifies a service, then the command applies to all
instances of that service. Abbreviated forms of FMRIs are unstable, and
should not be used in scripts or other permanent tools.


pattern

A pattern that is matched against the FMRIs of service instances
according to the "globbing" rules described by fnmatch(5). If the pattern
does not begin with "svc:", then "svc:/" is prepended.


If an abbreviated FMRI or pattern matches more than one service, a
warning message is displayed and that operand is ignored.
 EXAMPLES

Example 1 Restarting a Service Instance

The following command restarts the NFS server. The full FMRI for
the default service instance is: svc:/network/nfs/server:default


However, you can abbreviate the full FMRI as follows:

# svcadm restart nfs/server


Example 2 Disabling the Standard HTTP Server

The following command disables the standard HTTP server, using an abbreviated
FMRI:

$ svcadm disable http


Example 3 Enabling an Instance and Its Dependent Instances

The following command enables the foo:bar instance, and all instances on
which it depends:

$ svcadm enable -r foo:bar


Example 4 Synchronously enabling an instance

The following command enables the foo:bar instance. The command will not
return until the instance comes online or svcadm determines it is not
possible for the service to come online.

$ svcadm enable -s foo:bar


Example 5 Restricting and Restoring the Running Services

The following command restricts the running services to single user mode:

# svcadm milestone milestone/single-user


The following command restores the running services:

# svcadm milestone all


 EXIT STATUS

The following exit values are returned:
0

Successful completion.


1

A fatal error occurred. One or more error messages are displayed on standard
error.


2

Invalid command line options were specified.


3

svcadm determined that a service instance that it was waiting for could
not reach the desired state without administrator intervention due to a problem
with the service instance itself.


4

svcadm determined that a service instance that it was waiting for could
not reach the desired state without administrator intervention due to a problem
with the service's dependencies.


 ATTRIBUTES

See attributes(5) for descriptions of the following attributes:


ATTRIBUTE TYPE ATTRIBUTE VALUE
Interface Stability See below.


The interactive output is Uncommitted. The invocation and non-interactive
output are Committed.
 SEE ALSO

svcprop(1), svcs(1), inetd(1M), init(1M),
svccfg(1M), svc.startd(1M), libscf(3LIB), contract(4),
attributes(5), smf(5), smf_security(5), zones(5)
 NOTES

The amount of time svcadm will spend waiting for services and their
dependencies to change state is implicitly limited by their method timeouts.
For example, a service using the default restarter whose start method hangs
will be transitioned to the maintenance state when its timeout expires.
svcadm will then consider it impossible for this service to come online
without administrator intervention.

Attempts to synchronously enable a service which depends (directly or
indirectly) on a file may fail with an exit status indicating that dependencies
are unsatisfied if the caller does not have the privileges necessary to search
the directory containing the file. This limitation may be removed in a future
Solaris release.