te
Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
isnsadm - administer the internet Storage Name Server (iSNS) server

isnsadm options

isnsadm subcommand [subcommand_options] [operand]

The isnsadm command is the command-line interface to the Internet Storage Name Service (iSNS) server. isnsadm comprises a set of subcommands, described in their own section, each of which accomplishes one of the iSNS server management functions.

For any operations that will change the iSNS configurations the solaris.isnsmgr.write authorization is required. Refer to isns(1M). For read operations, the command does not require special authorizations.

isnsadm has a set of general options and a set of subcommand-specific options. The first category is described under OPTIONS; the second category is described in the context of each subcommand description.

The following options are supported: -?, --help

-V, --version

The following operands are used by one or more isnsadm subcommands. iscsi-node-name

discovery-domain-name discovery-domain-set-name

The isnsadm command supports the subcommands described below.

The add-dd subcommand adds a discovery domain to a discovery domain set.

The add-dd subcommand has the following syntax:

# isnsadm add-dd option discovery-domain-name, ...

add-dd has the following option: -s discovery-domain-set-name

The add-node subcommand adds a node to a specified discovery-domain.

The add-node subcommand has the following syntax:

# isnsadm add-node option iscsi-node-name,...

add-node has the following options: -d,--dd discovery-domain-name

The create-dd subcommand creates a discovery domain with the name you specify.

The create-dd subcommand has the following syntax:

# isnsadm create-dd discovery-domain-name, ...

create-dd has no options.

The create-dd-set subcommand creates a discovery domain set with the name you specify.

The create-dd-set subcommand has the following syntax:

# isnsadm create-dd-set discovery-domain-set-name, ...

create-dd-set has no options.

The delete-dd subcommand deletes a discovery domain of the name you specify.

The delete-dd subcommand has the following syntax:

# isnsadm delete-dd discovery-domain-name, ...

delete-dd has no options.

The delete-dd-set subcommand deletes a discovery domain set of the name you specify.

The delete-dd-set subcommand has the following syntax:

# isnsadm delete-dd-set discovery-domain-set-name, ...

delete-dd-set has no options.

The disable-dd-set subcommand disables a discovery domain set.

The disable-dd-set subcommand has the following syntax:

# isnsadm disable-dd-set discovery-domain-set-name, ...

disable-dd-set has no options.

The enable-dd-set subcommand enables a discovery domain set.

The enable-dd-set subcommand has the following syntax:

# isnsadm enable-dd-set discovery-domain-set-name, ...

enable-dd-set has no options.

The list-dd subcommand displays information about discovery domains. If no operand is specified, it lists all discovery domains that currently exist on the iSNS server.

The list-dd subcommand has the following syntax:

# isnsadm list-dd [option] [discovery-domain-name, ...]

list-dd supports the following option: -v, --verbose

The list-dd-set subcommand lists the discovery domain sets, both enabled and disabled, that exist on the iSNS server. Note that there is no dd-set registration. If no operand is specified, it lists all of the discovery domain sets.

The list-dd-set subcommand has the following syntax:

# isnsadm list-dd-set [option] [discovery-domain-set-name, ...]

list-dd-set supports the following option: -v, --verbose

The list-node subcommand displays information about nodes that are currently registered with the iSNS server or that are not registered and belong to non-default discovery-domain(s). For the latter case, the node has its type field shown as unknown. If no operand is specified, list-node lists all nodes known by the iSNS server.

The list-node subcommand has the following syntax:

# isnsadm list-node [options] [iscsi-node-name, ...]

list-node supports the following options: -t, --target

-i, --initiator -v, --verbose

The modify-dd subcommand modifies an attribute of a specified discovery domain.

The modify-dd subcommand has the following syntax:

# isnsadm modify-dd option discovery-domain-name

modify-dd has the following option: -n discovery-domain-name

The modify-dd-set subcommand modifies a discovery domain set.

The modify-dd-set subcommand has the following syntax:

# isnsadm modify-dd-set option discovery-domain-set-name

modify-dd-set has the following option: -n discovery-domain-set-name

The remove-dd subcommand removes the association with a specified discovery domain set.

The remove-dd subcommand has the following syntax:

# isnsadm remove-dd option discovery-domain-name, ...

remove-dd has the following option: -s discovery-domain-set-name

The remove-node subcommand removes a node.

The remove-node subcommand has the following syntax:

# isnsadm remove-node option iscsi-node-name, ...

remove-node has the following option: -d discovery-domain-name

The show-config subcommand displays the iSNS server administrative settings. Note that the setting can be modified by means of the service management facility (see smf(5)). Refer to isns(1M).

The show-config subcommand has the following syntax:

# isnsadm show-config

show-config has no options.

Example 1 Displaying Clients

The following use of the list-node subcommand displays clients.

# isnsadm list-node -v
iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.45173FEA.engr
 Alias: STK5320_NAS
 Type: Target
 Network Entity: SE5310
 Portal: 172.20.57.95:3260
 Portal Group: 1
 Portal: 172.20.56.95:3260
 Portal Group: 1
 DD Name: Default
iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.acct
 Alias:
 Type: Target
 Network Entity: SE5310
 Portal: 172.20.57.95:3260
 Portal Group: 1
 Portal: 172.20.56.95:3260
 Portal Group: 1
 DD Name: Default
iSCSI Name: iqn.1986-03.com.sun:01:e00000000000.46fd8e2b
 Alias: host-x2100
 Type: Initiator
 Network Entity: iqn.1986-03.com.sun:01:e00000000000.46fd8e2b
 Portal: 172.20.236.123:58530
 Portal Group: 1
 DD Name: Default

Example 2 Displaying a Discovery Domain

The following use of the list-dd subcommand displays discovery domains.

# isnsadm list-dd -v
DD name: Default
 DD set(s): Default
 iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.45173FEA.engr
 iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.acct
 iSCSI name: iqn.1986-03.com.sun:01:e00000000000.46fd8e2b
DD name: acct-dd
DD name: engineering-dd

Example 3 Adding a Node

The following use of the add-node subcommand adds a node to a discovery domain, creating a discovery domain membership.

# isnsadm add-node -d engineering-dd \e
iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.engr

Example 4 Removing a Node

The following use of the remove-node subcommand removes a node from a discovery domain, thereby removing a discovery domain membership.

# isnsadm remove-node -d acct-dd \e
iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.acct

Example 5 Creating a Discovery Domain Set

The following use of the create-dd-set subcommand creates a discovery domain set.

# isnsadm create-dd-set operation-dd-set

Example 6 Displaying a Discovery Domain Set

The following use of the list-dd-set subcommand displays discovery domain sets.

# isnsadm list-dd-set -v
DD Set name: Default
 State: Disabled
 DD Name: Default
DD Set name: operation-dd-set
 State: Disabled

Example 7 Adding a Discovery Domain

The following use of the add-dd subcommand adds a discovery domain to a discovery domain set.

# isnsadm add-dd -s operation-dd-set engineering-dd

Example 8 Displaying a Discovery Domain Set

The following use of the list-dd-set displays the attributes of a discovery domain set.

# isnsadm list-dd-set
DD Set name: Default
 State: Disabled
 DD Name: Default
DD Set name: operation-dd-set
 State: Disabled
 DD Name: engineering-dd

Example 9 Enabling a Discovery Domain Set

The following use of the enable-dd-set subcommand enables a discovery domain set.

# isnsadm enable-dd-set Default

Example 10 Disabling a Discovery Domain Set

The following use of the disable-dd-set subcommand disables a discovery domain set.

# isnsadm disable-dd-set Default

Example 11 Displaying Administrative Settings

The following use of the show-config subcommand displays current administrative settings.

# isnsadm show-config
 Data Store Location: /etc/isns/isnsdata.xml
 Entity Status Inquiry Non-Response Threshold: 3
 Management SCN Enabled: yes
 Authorized Control Node Names: -

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE

Interface Stability Volatile

iscsiadm(1M), iscsitadm(1M), isns(1M), attributes(5), smf(5)

When a subcommand is invoked with multiple operands and there are failures on one or more, but not all, operands, isnsadm displays a generic message indicating partial failure, with list of failed operands. An error on a specific operand can be found by issuing the same subcommand on the failing operand.