xref: /titanic_51/usr/src/man/man1c/uustat.1c (revision c10c16dec587a0662068f6e2991c29ed3a9db943) 
 te
 Copyright 1989 AT&T Copyright (c) 1995, Sun Microsystems, Inc. All Rights Reserved Portions Copyright (c) 1992, X/Open Company Limited All Rights Reserved
 Sun Microsystems, Inc. gratefully acknowledges The Open Group for permission to reproduce portions of its copyrighted documentation. Original documentation from The Open Group can be obtained online at 
 http://www.opengroup.org/bookstore/.
 The Institute of Electrical and Electronics Engineers and The Open Group, have given us permission to reprint portions of their documentation. In the following statement, the phrase "this text" refers to portions of the system documentation. Portions of this text are reprinted and reproduced in electronic form in the Sun OS Reference Manual, from IEEE Std 1003.1, 2004 Edition, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2004 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between these versions and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html.
 This notice shall appear on any product containing this material.
 The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
 You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
 When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
 uustat 1C "28 Mar 1995" "SunOS 5.11" "Communication Commands"
 NAME
uustat - uucp status inquiry and job control

 SYNOPSIS


uustat 
 [ [-m] | [-p] | [-q] | [-k jobid [-n]] | [-r jobid [-n]]]






uustat [-a] [-s system [-j]] [-u user] [-S qric]






uustat -t system [-c] [-d number]




 DESCRIPTION

The uustat utility functions in the following three areas:




1.
Displays the general status of, or cancels, previously specified uucp
commands.






2.
Provides remote system performance information, in terms of average transfer
rates or average queue times.






3.
Provides general remote system-specific and user-specific status of
uucp connections to other systems.



 OPTIONS

The following options are supported:

 "General Status"

These options obtain general status of, or cancel, previously specified
uucp commands:


-a


Lists all jobs in queue.





-j


Lists the total number of jobs displayed. The -j option can be used in
conjunction with the -a or the -s option.





-kjobid


Kills the uucp request whose job identification is jobid. The
killed uucp request must belong to the user issuing the uustat
command unless the user is the super-user or uucp administrator. If the job is
killed by the super-user or uucp administrator, electronic mail is sent to the
user.





-m


Reports the status of accessibility of all machines.





-n


Suppresses all standard output, but not standard error. The -n option is
used in conjunction with the -k and -r options.





-p


Executes the command ps -flp for all the process-ids that are in
the lock files.





-q


Lists the jobs queued for each machine. If a status file exists for the
machine, its date, time and status information are reported. In addition, if a
number appears in parentheses next to the number of C or X files,
it is the age in days of the oldest C./X. file for that system. The
Retry field represents the number of hours until the next possible call.
The Count is the number of failure attempts. Note: For systems with
a moderate number of outstanding jobs, this could take 30 seconds or more of
real-time to execute. An example of the output produced by the -q option
is:

eagle 3C 04/07-11:07 NO DEVICES AVAILABLE
mh3bs3 2C 07/07-10:42 SUCCESSFUL



This indicates the number of command files that are waiting for each system.
Each command file may have zero or more files to be sent (zero means to call
the system and see if work is to be done). The date and time refer to the
previous interaction with the system followed by the status of the interaction.





-rjobid


Rejuvenates jobid. The files associated with jobid are touched so
that their modification time is set to the current time. This prevents the
cleanup daemon from deleting the job until the jobs' modification time reaches
the limit imposed by the daemon.




 "Remote System Status"

These options provide remote system performance information, in terms of
average transfer rates or average queue times. The -c and -d
options can only be used in conjunction with the -t option:


-tsystem


Reports the average transfer rate or average queue time for the past 60 minutes
for the remote system. The following parameters can only be used with
this option:





-c


Average queue time is calculated when the -c parameter is specified and
average transfer rate when -c is not specified. For example, the command:

example% uustat -teagle -d50 -c



produces output in the following format:

average queue time to eagle for last 50 minutes:
 5 seconds



The same command without the -c parameter produces output in the
following format:

average transfer rate with eagle for last 50 minutes:
 2000.88 bytes/sec








-dnumber


number is specified in minutes. Used to override the 60 minute default
used for calculations. These calculations are based on information contained in
the optional performance log and therefore may not be available. Calculations
can only be made from the time that the performance log was last cleaned up.




 "User- or System-Specific Status"

These options provide general remote system-specific and user-specific status
of uucp connections to other systems. Either or both of the following
options can be specified with uustat. The -j option can be used in
conjunction with the -s option to list the total number of jobs
displayed:


-ssystem


Reports the status of all uucp requests for remote system system.





-uuser


Reports the status of all uucp requests issued by user.





Output for both the -s and -u options has the following format:

eagleN1bd7 4/07-11:07 S eagle dan 522 /home/dan/A
eagleC1bd8 4/07-11:07 S eagle dan 59 D.3b2al2ce4924
 4/07-11:07 S eagle dan rmail mike





With the above two options, the first field is the jobid of the job. This
is followed by the date/time. The next field is an S if the job is
sending a file or an R if the job is requesting a file. The next field is
the machine where the file is to be transferred. This is followed by the
user-id of the user who queued the job. The next field contains the size of the
file, or in the case of a remote execution (rmail is the command used for
remote mail), the name of the command. When the size appears in this field, the
file name is also given. This can either be the name given by the user or an
internal name (for example, D.3b2alce4924) that is created for data files
associated with remote executions (rmail in this example).


-Sqric


Reports the job state:


q


for queued jobs





r


for running jobs





i


for interrupted jobs





c


for completed jobs



A job is queued if the transfer has not started. A job is running when the
transfer has begun. A job is interrupted if the transfer began but was
terminated before the file was completely transferred. A completed job is a
job that successfully transferred. The completed state information is
maintained in the accounting log, which is optional and therefore may be
unavailable. The parameters can be used in any combination, but at least one
parameter must be specified. The -S option can also be used with -s
and -u options. The output for this option is exactly like the output for
-s and -u except that the job states are appended as the last
output word. Output for a completed job has the following format:

eagleC1bd3 completed








When no options are given, uustat writes to standard output the status of
all uucp requests issued by the current user.

 ENVIRONMENT VARIABLES

See environ(5) for descriptions of the following environment variables
that affect the execution of uustat: LANG, LC_ALL,
LC_COLLATELC_CTYPE, LC_MESSAGES, LC_TIME,
NLSPATH, and TZ.

 EXIT STATUS

The following exit values are returned:


0


Successful completion.





>0


An error occurred.




 FILES

/var/spool/uucp/*


spool directories





/var/uucp/.Admin/account


accounting log





/var/uucp/.Admin/perflog


performance log




 ATTRIBUTES

See attributes(5) for descriptions of the following attributes:







ATTRIBUTE TYPE ATTRIBUTE VALUE
Interface StabilityStandard



 SEE ALSO

uucp(1C), attributes(5), environ(5), standards(5)

 DIAGNOSTICS

The -t option produces no message when the data needed for the
calculations is not being recorded.

 NOTES

After the user has issued the uucp request, if the file to be transferred
is moved, deleted or was not copied to the spool directory (-C option)
when the uucp request was made, uustat reports a file size of
-99999. This job will eventually fail because the file(s) to be
transferred can not be found.