1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _LIBTOPO_H 28 #define _LIBTOPO_H 29 30 #include <sys/nvpair.h> 31 #include <stdio.h> 32 #include <libdevinfo.h> 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 39 40 typedef struct topo_hdl topo_hdl_t; 41 typedef struct topo_node tnode_t; 42 typedef struct topo_walk topo_walk_t; 43 typedef int32_t topo_instance_t; 44 typedef uint32_t topo_version_t; 45 46 typedef struct topo_list { 47 struct topo_list *l_prev; 48 struct topo_list *l_next; 49 } topo_list_t; 50 51 typedef struct topo_faclist { 52 topo_list_t tf_list; 53 tnode_t *tf_node; 54 } topo_faclist_t; 55 56 /* 57 * The following functions, error codes and data structures are private 58 * to libtopo snapshot consumers and enumerator modules. 59 */ 60 extern topo_hdl_t *topo_open(int, const char *, int *); 61 extern void topo_close(topo_hdl_t *); 62 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 63 extern char *topo_snap_hold_no_forceload(topo_hdl_t *, const char *, int *); 64 extern void topo_snap_release(topo_hdl_t *); 65 66 /* 67 * Snapshot walker support 68 */ 69 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 70 71 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 72 void *, int *); 73 extern int topo_walk_step(topo_walk_t *, int); 74 extern void topo_walk_fini(topo_walk_t *); 75 extern di_node_t topo_hdl_devinfo(topo_hdl_t *); 76 extern di_prom_handle_t topo_hdl_prominfo(topo_hdl_t *); 77 78 /* 79 * Walk status returned from walker 80 */ 81 #define TOPO_WALK_ERR -1 82 #define TOPO_WALK_NEXT 0 83 #define TOPO_WALK_TERMINATE 1 84 85 /* 86 * Types of walks: depth-first (child) or breadth-first (sibling) 87 */ 88 #define TOPO_WALK_CHILD 0x0001 89 #define TOPO_WALK_SIBLING 0x0002 90 91 /* 92 * FMRI helper routines 93 */ 94 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 95 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 96 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 97 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 98 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 99 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 100 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); 101 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); 102 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 103 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 104 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 105 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 106 int *); 107 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 108 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 109 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 110 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 111 uint32_t, topo_walk_cb_t, void *, int *); 112 113 /* 114 * Private utility functions for fmd 115 */ 116 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 117 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 118 119 /* 120 * Topo node utilities: callable from topo_walk_step() callback or module 121 * enumeration, topo_mod_enumerate() 122 */ 123 extern char *topo_node_name(tnode_t *); 124 extern topo_instance_t topo_node_instance(tnode_t *); 125 extern tnode_t *topo_node_parent(tnode_t *); 126 extern void *topo_node_private(tnode_t *); 127 extern int topo_node_flags(tnode_t *); 128 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 129 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 130 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 131 extern int topo_node_label(tnode_t *, char **, int *); 132 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); 133 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 134 nvlist_t *, nvlist_t **, int *); 135 extern boolean_t topo_method_supported(tnode_t *, const char *, 136 topo_version_t); 137 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 138 uint32_t, topo_faclist_t *, int *); 139 140 /* 141 * Node flags: denotes type of node 142 */ 143 #define TOPO_NODE_DEFAULT 0 144 #define TOPO_NODE_FACILITY 1 145 146 #define TOPO_FAC_TYPE_SENSOR "sensor" 147 #define TOPO_FAC_TYPE_INDICATOR "indicator" 148 149 /* 150 * Topo property get functions 151 */ 152 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 153 int32_t *, int *); 154 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 155 uint32_t *, int *); 156 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 157 int64_t *, int *); 158 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 159 uint64_t *, int *); 160 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 161 double *, int *); 162 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 163 char **, int *); 164 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 165 nvlist_t **, int *); 166 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 167 int32_t **, uint_t *, int *); 168 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 169 uint32_t **, uint_t *, int *); 170 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 171 int64_t **, uint_t *, int *); 172 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 173 uint64_t **, uint_t *, int *); 174 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 175 char ***, uint_t *, int *); 176 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 177 nvlist_t ***, uint_t *, int *); 178 179 /* 180 * Topo property set functions 181 */ 182 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 183 int32_t, int *); 184 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 185 uint32_t, int *); 186 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 187 int, int64_t, int *); 188 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 189 int, uint64_t, int *); 190 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 191 int, double, int *); 192 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 193 int, const char *, int *); 194 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 195 int, const nvlist_t *, int *); 196 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 197 int32_t *, uint_t, int *); 198 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 199 int, uint32_t *, uint_t, int *); 200 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 201 int, int64_t *, uint_t, int *); 202 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 203 int, uint64_t *, uint_t, int *); 204 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 205 int, const char **, uint_t, int *); 206 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 207 int, const nvlist_t **, uint_t, int *); 208 209 #define TOPO_PROP_IMMUTABLE 0 210 #define TOPO_PROP_MUTABLE 0x01 211 #define TOPO_PROP_NONVOLATILE 0x02 212 213 /* Protocol property group and property names */ 214 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 215 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 216 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 217 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 218 #define TOPO_PROP_MOD "module" /* software module FMRI */ 219 #define TOPO_PROP_PKG "package" /* software package FMRI */ 220 #define TOPO_PROP_LABEL "label" /* property LABEL */ 221 222 #define TOPO_METH_FAC_ENUM "fac_enum" 223 224 /* 225 * System property group 226 */ 227 #define TOPO_PGROUP_SYSTEM "system" 228 #define TOPO_PROP_ISA "isa" 229 #define TOPO_PROP_MACHINE "machine" 230 231 /* 232 * These enum definitions are used to define a set of error tags associated with 233 * libtopo error conditions occuring during the adminstration of 234 * properties, invocation of methods and fmri-based queries. The shell script 235 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 236 * source file. 237 * 238 * If you do something other than add a new error tag here, you may need to 239 * update the mkerror shell script as it is based upon simple regexps. 240 */ 241 typedef enum topo_prop_errno { 242 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 243 ETOPO_PROP_NOENT, /* undefined property or property group */ 244 ETOPO_PROP_DEFD, /* static property already defined */ 245 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 246 ETOPO_PROP_TYPE, /* invalid property type */ 247 ETOPO_PROP_NAME, /* invalid property name */ 248 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 249 ETOPO_PROP_NVL, /* malformed property nvlist */ 250 ETOPO_PROP_METHOD, /* get property method failed */ 251 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 252 } topo_prop_errno_t; 253 254 typedef enum topo_method_errno { 255 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 256 ETOPO_METHOD_INVAL, /* invalid method registration */ 257 ETOPO_METHOD_NOTSUP, /* method not supported */ 258 ETOPO_METHOD_FAIL, /* method failed */ 259 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 260 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 261 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 262 ETOPO_METHOD_DEFD, /* method op already defined */ 263 ETOPO_METHOD_END /* end of method errno list */ 264 } topo_method_errno_t; 265 266 typedef enum topo_fmri_errno { 267 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 268 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 269 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 270 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 271 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 272 ETOPO_FMRI_END /* end of fmri errno list */ 273 } topo_fmri_errno_t; 274 275 typedef enum topo_hdl_errno { 276 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 277 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 278 ETOPO_HDL_SNAP, /* snapshot already taken */ 279 ETOPO_HDL_INVAL, /* invalid argument specified */ 280 ETOPO_HDL_UUID, /* uuid already set */ 281 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 282 ETOPO_HDL_END /* end of handle errno list */ 283 } topo_hdl_errno_t; 284 285 extern const char *topo_strerror(int); 286 extern void topo_hdl_strfree(topo_hdl_t *, char *); 287 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 288 289 /* 290 * The following functions and data structures to support property 291 * observability are private to the fmtopo command. 292 */ 293 294 /* 295 * Each topology node advertises the name and data stability of each of its 296 * modules and properties. (see attributes(5)). 297 */ 298 299 /* 300 * Topo stability attributes 301 */ 302 typedef enum topo_stability { 303 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 304 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 305 TOPO_STABILITY_PRIVATE, /* private to Sun */ 306 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 307 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 308 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 309 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 310 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 311 TOPO_STABILITY_STANDARD /* industry standard */ 312 } topo_stability_t; 313 314 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 315 316 typedef struct topo_pgroup_info { 317 const char *tpi_name; /* property group name */ 318 topo_stability_t tpi_namestab; /* stability of group name */ 319 topo_stability_t tpi_datastab; /* stability of all property values */ 320 topo_version_t tpi_version; /* version of pgroup definition */ 321 } topo_pgroup_info_t; 322 323 extern topo_stability_t topo_name2stability(const char *); 324 extern const char *topo_stability2name(topo_stability_t); 325 extern void topo_pgroup_destroy(tnode_t *, const char *); 326 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 327 328 typedef enum { 329 TOPO_TYPE_INVALID = 0, 330 TOPO_TYPE_BOOLEAN, /* boolean */ 331 TOPO_TYPE_INT32, /* int32_t */ 332 TOPO_TYPE_UINT32, /* uint32_t */ 333 TOPO_TYPE_INT64, /* int64_t */ 334 TOPO_TYPE_UINT64, /* uint64_t */ 335 TOPO_TYPE_STRING, /* const char* */ 336 TOPO_TYPE_TIME, /* uint64_t */ 337 TOPO_TYPE_SIZE, /* uint64_t */ 338 TOPO_TYPE_FMRI, /* nvlist_t */ 339 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 340 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 341 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 342 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 343 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 344 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 345 TOPO_TYPE_DOUBLE /* double */ 346 } topo_type_t; 347 348 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 349 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 350 nvlist_t *, nvlist_t **, int *); 351 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 352 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 353 int, nvlist_t *, int *); 354 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 355 const char *, nvlist_t *, nvlist_t **, int *); 356 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 357 nvlist_t **, int *); 358 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 359 nvlist_t *, int, nvlist_t *, int *); 360 361 /* Property node NVL names used in topo_prop_getprops */ 362 #define TOPO_PROP_GROUP "property-group" 363 #define TOPO_PROP_GROUP_NAME "property-group-name" 364 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 365 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 366 #define TOPO_PROP_GROUP_VERSION "property-group-version" 367 #define TOPO_PROP_VAL "property" 368 #define TOPO_PROP_VAL_NAME "property-name" 369 #define TOPO_PROP_VAL_VAL "property-value" 370 #define TOPO_PROP_VAL_TYPE "property-type" 371 #define TOPO_PROP_FLAG "property-flag" 372 373 /* 374 * ARGS list used in topo property methods 375 */ 376 #define TOPO_PROP_ARGS "args" 377 #define TOPO_PROP_PARGS "private-args" 378 379 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 380 381 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 382 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 383 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 384 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 385 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 386 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 387 388 /* 389 * Interfaces for converting sensor/indicator types, units, states, etc to 390 * a string 391 */ 392 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 393 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 394 void topo_led_type_name(uint8_t type, char *buf, size_t len); 395 void topo_led_state_name(uint8_t type, char *buf, size_t len); 396 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 397 size_t len); 398 399 /* 400 * Defines for standard properties for sensors and indicators 401 */ 402 #define TOPO_PGROUP_FACILITY "facility" 403 404 #define TOPO_SENSOR_READING "reading" 405 #define TOPO_SENSOR_STATE "state" 406 #define TOPO_SENSOR_CLASS "sensor-class" 407 #define TOPO_FACILITY_TYPE "type" 408 #define TOPO_SENSOR_UNITS "units" 409 #define TOPO_LED_MODE "mode" 410 411 /* 412 * Sensor Classes 413 * 414 * The "sensor-class" property in the "facility" propgroup on 415 * facility nodes of type "sensor" should be set to one of these 416 * two values. 417 * 418 * Threshold sensors provide an analog sensor reading via the 419 * "reading" property in the facility propgroup. They will also 420 * provide one or more discrete states via the "state" property 421 * in the facility propgroup. 422 * 423 * Discrete sensors will not provide an analog reading by will 424 * provide one or more discrete states via the "state" property 425 * in the facility propgroup. 426 */ 427 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 428 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 429 430 /* 431 * Sensor unit types. We're using the unit types and corresponding 432 * codes described in the IPMI 2.0 spec as a reference as it seems to be a 433 * reasonably comprehensive list. This also simplifies the IPMI provider code 434 * since the unit type codes will map exactly to what libtopo uses (so no 435 * conversion necessary). 436 */ 437 typedef enum topo_sensor_unit { 438 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 439 TOPO_SENSOR_UNITS_DEGREES_C, 440 TOPO_SENSOR_UNITS_DEGREES_F, 441 TOPO_SENSOR_UNITS_DEGREES_K, 442 TOPO_SENSOR_UNITS_VOLTS, 443 TOPO_SENSOR_UNITS_AMPS, 444 TOPO_SENSOR_UNITS_WATTS, 445 TOPO_SENSOR_UNITS_JOULES, 446 TOPO_SENSOR_UNITS_COULOMBS, 447 TOPO_SENSOR_UNITS_VA, 448 TOPO_SENSOR_UNITS_NITS, 449 TOPO_SENSOR_UNITS_LUMEN, 450 TOPO_SENSOR_UNITS_LUX, 451 TOPO_SENSOR_UNITS_CANDELA, 452 TOPO_SENSOR_UNITS_KPA, 453 TOPO_SENSOR_UNITS_PSI, 454 455 TOPO_SENSOR_UNITS_NEWTON, 456 TOPO_SENSOR_UNITS_CFM, 457 TOPO_SENSOR_UNITS_RPM, 458 TOPO_SENSOR_UNITS_HZ, 459 TOPO_SENSOR_UNITS_MICROSEC, 460 TOPO_SENSOR_UNITS_MILLISEC, 461 TOPO_SENSOR_UNITS_SECS, 462 TOPO_SENSOR_UNITS_MIN, 463 TOPO_SENSOR_UNITS_HOUR, 464 TOPO_SENSOR_UNITS_DAY, 465 TOPO_SENSOR_UNITS_WEEK, 466 TOPO_SENSOR_UNITS_MIL, 467 TOPO_SENSOR_UNITS_INCHES, 468 TOPO_SENSOR_UNITS_FEET, 469 TOPO_SENSOR_UNITS_CUB_INCH, 470 TOPO_SENSOR_UNITS_CUB_FEET, 471 472 TOPO_SENSOR_UNITS_MM, 473 TOPO_SENSOR_UNITS_CM, 474 TOPO_SENSOR_UNITS_METERS, 475 TOPO_SENSOR_UNITS_CUB_CM, 476 TOPO_SENSOR_UNITS_CUB_METER, 477 TOPO_SENSOR_UNITS_LITERS, 478 TOPO_SENSOR_UNITS_FLUID_OUNCE, 479 TOPO_SENSOR_UNITS_RADIANS, 480 TOPO_SENSOR_UNITS_STERADIANS, 481 TOPO_SENSOR_UNITS_REVOLUTIONS, 482 TOPO_SENSOR_UNITS_CYCLES, 483 TOPO_SENSOR_UNITS_GRAVITIES, 484 TOPO_SENSOR_UNITS_OUNCE, 485 TOPO_SENSOR_UNITS_POUND, 486 TOPO_SENSOR_UNITS_FOOT_POUND, 487 TOPO_SENSOR_UNITS_OZ_INCH, 488 489 TOPO_SENSOR_UNITS_GAUSS, 490 TOPO_SENSOR_UNITS_GILBERTS, 491 TOPO_SENSOR_UNITS_HENRY, 492 TOPO_SENSOR_UNITS_MILHENRY, 493 TOPO_SENSOR_UNITS_FARAD, 494 TOPO_SENSOR_UNITS_MICROFARAD, 495 TOPO_SENSOR_UNITS_OHMS, 496 TOPO_SENSOR_UNITS_SIEMENS, 497 TOPO_SENSOR_UNITS_MOLE, 498 TOPO_SENSOR_UNITS_BECQUEREL, 499 TOPO_SENSOR_UNITS_PPM, 500 TOPO_SENSOR_UNITS_RESERVED1, 501 TOPO_SENSOR_UNITS_DECIBELS, 502 TOPO_SENSOR_UNITS_DBA, 503 TOPO_SENSOR_UNITS_DBC, 504 TOPO_SENSOR_UNITS_GRAY, 505 506 TOPO_SENSOR_UNITS_SIEVERT, 507 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 508 TOPO_SENSOR_UNITS_BIT, 509 TOPO_SENSOR_UNITS_KILOBIT, 510 TOPO_SENSOR_UNITS_MEGABIT, 511 TOPO_SENSOR_UNITS_GIGABIT, 512 TOPO_SENSOR_UNITS_BYTE, 513 TOPO_SENSOR_UNITS_KILOBYTE, 514 TOPO_SENSOR_UNITS_MEGABYTE, 515 TOPO_SENSOR_UNITS_GIGABYTE, 516 TOPO_SENSOR_UNITS_WORD, 517 TOPO_SENSOR_UNITS_DWORD, 518 TOPO_SENSOR_UNITS_QWORD, 519 TOPO_SENSOR_UNITS_MEMLINE, 520 TOPO_SENSOR_UNITS_HIT, 521 TOPO_SENSOR_UNITS_MISS, 522 523 TOPO_SENSOR_UNITS_RETRY, 524 TOPO_SENSOR_UNITS_RESET, 525 TOPO_SENSOR_UNITS_OVERFLOW, 526 TOPO_SENSOR_UNITS_UNDERRUN, 527 TOPO_SENSOR_UNITS_COLLISION, 528 TOPO_SENSOR_UNITS_PACKETS, 529 TOPO_SENSOR_UNITS_MESSAGES, 530 TOPO_SENSOR_UNITS_CHARACTERS, 531 TOPO_SENSOR_UNITS_ERROR, 532 TOPO_SENSOR_UNITS_CE, 533 TOPO_SENSOR_UNITS_UE, 534 TOPO_SENSOR_UNITS_FATAL_ERROR, 535 TOPO_SENSOR_UNITS_GRAMS 536 } topo_sensor_unit_t; 537 538 /* 539 * These defines are used by the topo_method_sensor_failure to indicate 540 * whether the source of a sensor failure is believed to be the result of an 541 * internal failure, external condition or unknown 542 */ 543 #define TOPO_SENSOR_ERRSRC_UNKNOWN 0 544 #define TOPO_SENSOR_ERRSRC_INTERNAL 1 545 #define TOPO_SENSOR_ERRSRC_EXTERNAL 2 546 547 /* 548 * Sensor Types amd the associated sensor-type-specific states 549 * 550 * These are used to decode the type and state properties in the facility 551 * propgroup on facility nodes of type sensor. 552 * 553 * Again we're basically using the same defines as for IPMI as it's serves 554 * as a good starting point and simplifies the IPMI provider code. Of course 555 * other facility providers will need to convert from their native codes 556 * to the topo code when they set the type and state properties. 557 */ 558 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 559 #define TOPO_SENSOR_TYPE_TEMP 0x0001 560 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 561 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 562 #define TOPO_SENSOR_TYPE_FAN 0x0004 563 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 564 565 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 566 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 567 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 568 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 569 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 570 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 571 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 572 573 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 574 575 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 576 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 577 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 578 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 579 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 580 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 581 582 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 583 584 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 585 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 586 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 587 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 588 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 589 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 590 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 591 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 592 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 593 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 594 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 595 596 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 597 598 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 599 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 600 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 601 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 602 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 603 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 604 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 605 606 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 607 608 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 609 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 610 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 611 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 612 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 613 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 614 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 615 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 616 617 #define TOPO_SENSOR_TYPE_COOLING 0x000A 618 #define TOPO_SENSOR_TYPE_OTHER 0x000B 619 620 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 621 622 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 623 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 624 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 625 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 626 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 627 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 628 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 629 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 630 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 631 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 632 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 633 634 #define TOPO_SENSOR_TYPE_BAY 0x000D 635 636 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 637 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 638 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 639 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 640 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 641 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 642 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 643 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 644 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 645 646 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 647 648 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 649 650 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 651 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 652 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 653 654 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 655 656 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 657 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 658 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 659 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 660 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 661 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 662 663 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 664 665 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 666 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 667 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 668 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 669 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 670 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 671 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 672 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 673 674 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 675 676 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 677 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 678 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 679 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 680 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 681 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 682 683 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 684 685 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 686 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 687 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 688 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 689 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 690 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 691 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 692 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 693 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 694 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 695 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 696 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 697 698 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 699 700 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 701 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 702 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 703 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 704 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 705 706 #define TOPO_SENSOR_TYPE_MODULE 0x0015 707 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 708 #define TOPO_SENSOR_TYPE_CARD 0x0017 709 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 710 711 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 712 713 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 714 715 #define TOPO_SENSOR_TYPE_FRU 0x001A 716 717 #define TOPO_SENSOR_TYPE_CABLE 0x001B 718 719 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 720 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 721 722 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 723 724 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 725 726 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 727 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 728 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 729 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 730 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 731 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 732 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 733 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 734 735 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 736 737 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 738 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 739 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 740 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 741 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 742 743 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 744 745 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 746 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 747 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 748 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 749 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 750 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 751 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 752 753 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 754 755 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 756 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 757 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 758 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 759 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 760 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 761 762 #define TOPO_SENSOR_TYPE_SLOT 0x0021 763 764 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 765 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 766 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 767 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 768 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 769 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 770 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 771 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 772 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 773 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 774 775 #define TOPO_SENSOR_TYPE_ACPI 0x0022 776 777 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 778 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 779 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 780 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 781 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 782 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 783 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 784 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 785 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 786 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 787 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 788 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 789 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 790 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 791 792 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 793 794 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 795 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 796 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 797 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 798 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 799 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 800 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 801 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 802 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 803 804 #define TOPO_SENSOR_TYPE_ALERT 0x0024 805 806 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 807 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 808 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 809 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 810 811 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 812 813 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 814 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 815 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 816 817 #define TOPO_SENSOR_TYPE_ASIC 0x0026 818 819 #define TOPO_SENSOR_TYPE_LAN 0x0027 820 821 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 822 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 823 824 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 825 826 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 827 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 828 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 829 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 830 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 831 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 832 833 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 834 835 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 836 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 837 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 838 839 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 840 841 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 842 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 843 844 #define TOPO_SENSOR_TYPE_VERSION 0x002B 845 846 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 847 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 848 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 849 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 850 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 851 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 852 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 853 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 854 855 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 856 857 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 858 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 859 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 860 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 861 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 862 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 863 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 864 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 865 866 /* 867 * We simplify the IPMI sensor type code defines by combining the generic 868 * and sensor-specific codes into a single range. Because there's overlap 869 * between the two ranges we offset the generic type codes by 0x0100 870 * which allows ample room in the hole for future expansion of the table to 871 * accomodate either additions to the IPMI spec or to support new sensor types 872 * for alternate provider modules. 873 */ 874 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 875 876 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 877 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 878 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 879 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 880 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 881 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 882 883 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 884 885 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 886 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 887 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 888 889 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 890 891 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 892 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 893 894 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 895 896 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 897 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 898 899 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 900 901 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 902 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 903 904 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 905 906 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 907 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 908 909 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 910 911 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 912 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 913 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 914 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 915 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 916 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 917 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 918 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 919 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 920 921 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 922 923 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 924 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 925 926 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 927 928 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 929 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 930 931 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 932 933 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 934 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 935 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 936 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 937 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 938 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 939 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 940 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 941 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 942 943 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 944 945 /* 946 * ACPI power state 947 */ 948 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 949 950 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 951 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 952 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 953 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 954 955 /* 956 * These sensor types don't exist in the IPMI spec, but allow consumers to 957 * associate discrete sensors with component failure. The 'ok' sensor is the 958 * inverse of the 'failure' sensor. Note that the values intentionally mimic 959 * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors 960 * but just change the type to get semantically meaningful behavior. 961 */ 962 #define TOPO_SENSOR_TYPE_GENERIC_FAILURE 0x010D 963 964 #define TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED 0x0001 965 #define TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV 0x0002 966 #define TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL 0x0004 967 968 #define TOPO_SENSOR_TYPE_GENERIC_OK 0x010E 969 970 #define TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED 0x0001 971 #define TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED 0x0002 972 973 /* 974 * Indicator modes and types 975 */ 976 typedef enum topo_led_state { 977 TOPO_LED_STATE_OFF = 0, 978 TOPO_LED_STATE_ON 979 } topo_led_state_t; 980 981 #define TOPO_FAC_TYPE_ANY 0xFFFFFFFF 982 983 /* 984 * This list is limited to the set of LED's that we're likely to manage through 985 * FMA. Thus is does not include things like power or activity LED's 986 */ 987 typedef enum topo_led_type { 988 TOPO_LED_TYPE_SERVICE = 0, 989 TOPO_LED_TYPE_LOCATE, 990 TOPO_LED_TYPE_OK2RM, 991 TOPO_LED_TYPE_PRESENT 992 } topo_led_type_t; 993 994 995 #ifdef __cplusplus 996 } 997 #endif 998 999 #endif /* _LIBTOPO_H */ 1000