1 /* 2 * Constants etc. for the Bochs/Etherboot pseudo-NIC 3 * 4 * This header file must be valid C and C++. 5 * 6 * Operation of the pseudo-NIC (PNIC) is pretty simple. To write a 7 * command plus data, first write the length of the data to 8 * PNIC_REG_LEN, then write the data a byte at a type to 9 * PNIC_REG_DATA, then write the command code to PNIC_REG_CMD. The 10 * status will be available from PNIC_REG_STAT. The length of any 11 * data returned will be in PNIC_REG_LEN and can be read a byte at a 12 * time from PNIC_REG_DATA. 13 */ 14 15 /* 16 * PCI parameters 17 */ 18 #define PNIC_PCI_VENDOR 0xfefe /* Hopefully these won't clash with */ 19 #define PNIC_PCI_DEVICE 0xefef /* any real PCI device IDs. */ 20 21 /* 22 * 'Hardware' register addresses, offset from io_base 23 */ 24 #define PNIC_REG_CMD 0x00 /* Command register, 2 bytes, write only */ 25 #define PNIC_REG_STAT 0x00 /* Status register, 2 bytes, read only */ 26 #define PNIC_REG_LEN 0x02 /* Length register, 2 bytes, read-write */ 27 #define PNIC_REG_DATA 0x04 /* Data port, 1 byte, read-write */ 28 /* 29 * PNIC_MAX_REG used in Bochs to claim i/o space 30 */ 31 #define PNIC_MAX_REG 0x04 32 33 /* 34 * Command code definitions: write these into PNIC_REG_CMD 35 */ 36 #define PNIC_CMD_NOOP 0x0000 37 #define PNIC_CMD_API_VER 0x0001 38 #define PNIC_CMD_READ_MAC 0x0002 39 #define PNIC_CMD_RESET 0x0003 40 #define PNIC_CMD_XMIT 0x0004 41 #define PNIC_CMD_RECV 0x0005 42 #define PNIC_CMD_RECV_QLEN 0x0006 43 #define PNIC_CMD_MASK_IRQ 0x0007 44 #define PNIC_CMD_FORCE_IRQ 0x0008 45 46 /* 47 * Status code definitions: read these from PNIC_REG_STAT 48 * 49 * We avoid using status codes that might be confused with 50 * randomly-read data (e.g. 0x0000, 0xffff etc.) 51 */ 52 #define PNIC_STATUS_OK 0x4f4b /* 'OK' */ 53 #define PNIC_STATUS_UNKNOWN_CMD 0x3f3f /* '??' */ 54 55 /* 56 * Other miscellaneous information 57 */ 58 59 #define PNIC_API_VERSION 0x0101 /* 1.1 */ 60