1#!/sbin/sh -p 2# 3# CDDL HEADER START 4# 5# The contents of this file are subject to the terms of the 6# Common Development and Distribution License (the "License"). 7# You may not use this file except in compliance with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# 27PATH=/usr/bin:/usr/sbin:$PATH; export PATH 28STMSBOOTUTIL=/lib/mpxio/stmsboot_util 29STMSMETHODSCRIPT=/lib/svc/method/mpxio-upgrade 30KDRVCONF= 31DRVCONF= 32TMPDRVCONF= 33TMPDRVCONF_MPXIO_ENTRY= 34TMPDRVCONF_SATA_ENTRY= 35DRVLIST= 36GUID= 37VFSTAB=/etc/vfstab 38SAVEDIR=/etc/mpxio 39BOOTDEVICES=$SAVEDIR/boot-devices 40RECOVERFILE=$SAVEDIR/recover_instructions 41SVCCFG_RECOVERY=$SAVEDIR/svccfg_recover 42SUPPORTED_DRIVERS="fp|mpt|mpt_sas|pmcs" 43USAGE=`gettext "Usage: stmsboot [-D $SUPPORTED_DRIVERS] -e | -d | -u | -L | -l controller_number"` 44TEXTDOMAIN=SUNW_OST_OSCMD 45export TEXTDOMAIN 46STMSINSTANCE=svc:system/device/mpxio-upgrade:default 47STMSBOOT=/usr/sbin/stmsboot 48BOOTADM=/sbin/bootadm 49MOUNT=/usr/sbin/mount 50EEPROM=/usr/sbin/eeprom 51EGREP=/usr/bin/egrep 52GREP=/usr/bin/grep 53AWK=/usr/bin/awk 54CP=/usr/bin/cp 55DF=/usr/bin/df 56LS=/usr/bin/ls 57MV=/usr/bin/mv 58RM=/usr/bin/rm 59SORT=/usr/bin/sort 60UNIQ=/usr/bin/uniq 61EXPR=/usr/bin/expr 62MKDIR=/usr/bin/mkdir 63REBOOT=/usr/sbin/reboot 64SED=/usr/bin/sed 65SVCPROP=/usr/bin/svcprop 66SVCCFG=/usr/sbin/svccfg 67SVCS=/usr/bin/svcs 68SVCADM=/usr/sbin/svcadm 69 70NOW=`/usr/bin/date +%G%m%d_%H%M` 71MACH=`/usr/bin/uname -p` 72BOOTENV_FILE=bootenv.rc 73reboot_needed=0 74new_bootpath="" 75CLIENT_TYPE_PHCI="" 76CLIENT_TYPE_VHCI="/scsi_vhci" 77new_rootdev="" 78svm_md_device="" 79 80# 81# Copy all entries (including comments) from source driver.conf 82# to destination driver.conf except those entries which contain 83# the mpxio-disable property. 84# Take into consideration entries that spawn more than one line. 85# 86# $1 source driver.conf file 87# $2 destination driver.conf file 88# 89# Returns 0 on success, non zero on failure. 90# 91delete_mpxio_disable_entries() 92{ 93 # be careful here, we've got embedded \t characters 94 # in sed's pattern space. 95 $SED ' 96 /^[ ]*#/{ p 97 d 98 } 99 s/[ ]*$// 100 /^$/{ p 101 d 102 } 103 /mpxio-disable[ ]*=.*;$/{ w '$3' 104 d 105 } 106 /disable-sata-mpxio[ ]*=.*;$/{ w '$4' 107 d 108 } 109 /;$/{ p 110 d 111 } 112 :rdnext 113 N 114 s/[ ]*$// 115 /[^;]$/b rdnext 116 /mpxio-disable[ ]*=/{ s/\n/ /g 117 w '$3' 118 d 119 } 120 ' $1 > $2 121 122 return $? 123} 124 125# 126# backup the last saved copy of the specified files. 127# $* files to backup 128# 129backup_lastsaved() 130{ 131 for file in $* 132 do 133 newfile=`basename $file` 134 $CP $file $SAVEDIR/$newfile.$cmd.$NOW 135 done 136} 137 138# 139# build recover instructions 140# 141# $1 1 to include boot script in the instructions 142# 0 otherwise 143# 144build_recover() 145{ 146 gettext "Instructions to recover your previous STMS configuration (if in case the system does not boot):\n\n" > $RECOVERFILE 147 echo "\tboot net \c" >> $RECOVERFILE 148 gettext "(or from a cd/dvd/another disk)\n" >> $RECOVERFILE 149 echo "\tfsck <your-root-device>" >> $RECOVERFILE 150 echo "\tmount <your-root-device> /mnt" >> $RECOVERFILE 151 152 if [ "$cmd" = "update" ]; then 153 gettext "\tUndo the modifications you made to STMS configuration.\n\tFor example undo any changes you made to " >> $RECOVERFILE 154 echo "/mnt$KDRVCONF." >> $RECOVERFILE 155 else 156 echo "\tcp /mnt${SAVEDIR}/$DRVCONF.$cmd.$NOW /mnt$KDRVCONF" >> $RECOVERFILE 157 fi 158 159 if [ $1 -eq 1 ]; then 160 echo "\tcp /mnt${SAVEDIR}/vfstab.$cmd.$NOW /mnt$VFSTAB" >> $RECOVERFILE 161 162 echo "repository /mnt/etc/svc/repository.db" > $SVCCFG_RECOVERY 163 echo "select $STMSINSTANCE" >> $SVCCFG_RECOVERY 164 echo "setprop general/enabled=false" >> $SVCCFG_RECOVERY 165 echo "exit" >> $SVCCFG_RECOVERY 166 167 echo "\t$SVCCFG -f /mnt$SVCCFG_RECOVERY" >> $RECOVERFILE 168 169 if [ -n "$new_bootpath" -a "$MACH" = "i386" ]; then 170 echo "\tcp /mnt${SAVEDIR}/bootenv.rc.$cmd.$NOW /mnt/boot/solaris/$BOOTENV_FILE" >> $RECOVERFILE 171 fi 172 fi 173 174 rootdisk=`$MOUNT | $GREP "/ on " | cut -f 3 -d " "` 175 echo "\tumount /mnt\n\treboot\n\n${rootdisk} \c" >> $RECOVERFILE 176 gettext "was your root device,\nbut it could be named differently after you boot net.\n" >> $RECOVERFILE 177} 178 179 180# 181# Arrange for /etc/vfstab and dump configuration to be updated 182# during the next reboot. If the cmd is "enable" or "disable", copy 183# $TMPDRVCONF to $KDRVCONF. 184# 185# Returns 0 on success, 1 on failure. 186# 187update_sysfiles() 188{ 189 190 gettext "WARNING: This operation will require a reboot.\n" 191 gettext "Do you want to continue ? [y/n] (default: y) " 192 read response 193 194 if [ -n "$response" -a "$response" != "y" -a \ 195 "$response" != "Y" ]; then 196 for d in $DRVLIST; do 197 TMPDRVCONF=/var/run/tmp.$d.conf.$$ 198 $RM -f $TMPDRVCONF > /dev/null 2>&1 199 done; 200 return 0; 201 fi 202 203 # set need_bootscript to the number of drivers that 204 # we support. 205 need_bootscript=`echo $SUPPORTED_DRIVERS|$AWK -F"|" '{print NF}'` 206 207 if [ "$cmd" = "enable" -o "$cmd" = "disable" ]; then 208 209 for d in $DRVLIST; do 210 DRVCONF=$d.conf 211 KDRVCONF=/kernel/drv/$d.conf 212 TMPDRVCONF=/var/run/tmp.$d.conf.$$ 213 214 $CP $KDRVCONF $SAVEDIR/`basename $KDRVCONF`.$cmd.$NOW 215 if [ -f $TMPDRVCONF ]; then 216 $CP $TMPDRVCONF $KDRVCONF 217 $RM -f $TMPDRVCONF 218 else 219 # if $TMPDRVCONF doesn't exist, then we 220 # haven't made any changes to it 221 continue; 222 fi 223 224 # 225 # there is no need to update the system files in the following 226 # cases: 227 # - we are enabling mpxio and the system has no configured 228 # disks accessible by phci paths. 229 # - we are disabling mpxio and the system has no configured 230 # disks accessible by vhci paths. 231 # 232 233 # Function to setup the CLIENT_TYPE_PHCI string based on 234 # the list of drivers that we're operating on. The variable 235 # depends upon the pathname of the parent node in the 236 # device tree, which can be different on x86/x64 and sparc. 237 238 CLIENT_TYPE_PHCI=`$STMSBOOTUTIL -D $d -N`; 239 240 if [ -z "$CLIENT_TYPE_PHCI" ]; then 241 continue; 242 fi 243 244 if [ "$cmd" = "enable" ]; then 245 $LS -l /dev/dsk/*s2 2> /dev/null | \ 246 $EGREP -s "$CLIENT_TYPE_PHCI" 247 else 248 $LS -l /dev/dsk/*s2 2> /dev/null | \ 249 $EGREP -s "$CLIENT_TYPE_VHCI" 250 fi 251 252 if [ $? -ne 0 ]; then 253 need_bootscript=`$EXPR $need_bootscript - 1` 254 fi 255 done 256 fi 257 258 if [ $need_bootscript -gt 0 ]; then 259 need_bootscript=1 260 if [ -n "$new_bootpath" -a "$MACH" = "i386" ]; then 261 #only update bootpath for x86. 262 $CP /boot/solaris/$BOOTENV_FILE $SAVEDIR/$BOOTENV_FILE.$cmd.$NOW 263 $EEPROM bootpath="$new_bootpath" 264 fi 265 266 if [ "$svm_md_device" != "NOT_MAPPED" ]; then 267 # Enable the mpxio-upgrade service for the reboot 268 $SVCADM disable -t $STMSINSTANCE 269 $SVCCFG -s $STMSINSTANCE "setprop general/enabled=true" 270 fi 271 else 272 need_bootscript=0 273 fi 274 275 build_recover $need_bootscript 276 277 if [ "$MACH" = "i386" ]; then 278 $BOOTADM update-archive 279 fi 280 281 gettext "The changes will come into effect after rebooting the system.\nReboot the system now ? [y/n] (default: y) " 282 read response 283 284 if [ -z "$response" -o "$response" = "y" -o \ 285 "$response" = "Y" ]; then 286 $REBOOT 287 fi 288 289 return 0 290} 291 292 293# 294# Enable or disable mpxio as specified by the cmd. 295# Returns 0 on success, 1 on failure. 296# 297# Args: $cmd = {enable | disable} 298# $d = {fp | mpt | mpt_sas | pmcs} 299# 300# the global variable $DRVLIST is used 301# 302configure_mpxio() 303{ 304 # be careful here, we've got embedded \t characters 305 # in sed's pattern space. 306 mpxiodisableno='mpxio-disable[ ]*=[ ]*"no"[ ]*;' 307 mpxiodisableyes='mpxio-disable[ ]*=[ ]*"yes"[ ]*;' 308 satadisableno='disable-sata-mpxio[ ]*=[ ]*"no"[ ]*;' 309 satadisableyes='disable-sata-mpxio[ ]*=[ ]*"yes"[ ]*;' 310 311 if [ "$cmd" = "enable" ]; then 312 mpxiodisable_cur_entry=$mpxiodisableyes 313 satadisable_cur_entry=$satadisableyes 314 propval=no 315 msg=`gettext "STMS already enabled"` 316 else 317 mpxiodisable_cur_entry=$mpxiodisableno 318 satadisable_cur_entry=$satadisableno 319 propval=yes 320 msg=`gettext "STMS already disabled"` 321 fi 322 323 DRVCONF=$d.conf 324 KDRVCONF=/kernel/drv/$d.conf 325 TMPDRVCONF=/var/run/tmp.$d.conf.$$ 326 TMPDRVCONF_MPXIO_ENTRY=/var/run/tmp.$d.conf.mpxioentry.$$; 327 TMPDRVCONF_SATA_ENTRY=/var/run/tmp.$d.conf.sataentry.$$; 328 329 if delete_mpxio_disable_entries $KDRVCONF $TMPDRVCONF $TMPDRVCONF_MPXIO_ENTRY $TMPDRVCONF_SATA_ENTRY; then 330 331 if [ -s $TMPDRVCONF_MPXIO_ENTRY ]; then 332 # $DRVCONF does have mpxiodisable entries 333 $EGREP -s "$mpxiodisable_cur_entry" $TMPDRVCONF_MPXIO_ENTRY 334 if [ $? -eq 0 ]; then 335 reboot_needed=`$EXPR $reboot_needed + 1` 336 else 337 # if all mpxiodisable entries are no/yes for 338 # enable/disable mpxio, notify the user 339 $EGREP -s "$satadisable_cur_entry" $TMPDRVCONF_SATA_ENTRY 340 if [ $? -eq 0 -a "$d" = "mpt" ]; then 341 reboot_needed=`$EXPR $reboot_needed + 1` 342 else 343 $RM -f $TMPDRVCONF $TMPDRVCONF_MPXIO_ENTRY $TMPDRVCONF_SATA_ENTRY > /dev/null 2>&1 344 continue; 345 fi 346 fi 347 348 # If mpxiodisable entries do not exist, always continue update 349 fi 350 else 351 $RM -f $TMPDRVCONF $TMPDRVCONF_MPXIO_ENTRY $TMPDRVCONF_SATA_ENTRY > /dev/null 2>&1 352 gettext "failed to update " 1>&2 353 echo "$KDRVCONF." 1>&2 354 gettext "No changes were made to your STMS configuration.\n" 1>&2 355 return 1 356 fi 357 358 rm $TMPDRVCONF_MPXIO_ENTRY $TMPDRVCONF_SATA_ENTRY > /dev/null 2>&1 359 echo "mpxio-disable=\"${propval}\";" >> $TMPDRVCONF 360 if [ "$d" = "mpt" ]; then 361 echo "disable-sata-mpxio=\"${propval}\";" >> $TMPDRVCONF 362 fi 363 364} 365 366setcmd() 367{ 368 if [ "$cmd" = "none" ]; then 369 cmd=$1 370 else 371 echo "$USAGE" 1>&2 372 exit 2 373 fi 374} 375 376# 377# Need to update bootpath on x86 if boot system from FC disk 378# Only update bootpath here when mpxio is enabled 379# If mpxio is currently disabled, then we'll update bootpath in the 380# mpxio-upgrade service method on reboot. 381# 382 383get_newbootpath_for_stmsdev() { 384 if [ "$cmd" = "enable" ]; then 385 return 0 386 fi 387 388 cur_bootpath=`$STMSBOOTUTIL -b` 389 if [ $? != 0 ]; then 390 return 1 391 fi 392 393 # Since on x64 platforms the eeprom command doesn't update the 394 # kernel, the file /boot/solaris/bootenv.rc and the kernel's 395 # bootpath variable have a good chance of differing. We do some 396 # extra handwaving to get the correct bootpath variable setting. 397 398 ONDISKVER=`$AWK '/bootpath/ {print $3}' /boot/solaris/bootenv.rc|\ 399 $SED -e"s,',,g"` 400 if [ "$ONDISKVER" != "$cur_bootpath" ]; then 401 cur_bootpath="$ONDISKVER" 402 fi 403 404 NEWBOOTPATH="" 405 for path in $cur_bootpath; do 406 mapped=`$STMSBOOTUTIL -p $path` 407 if [ "$mapped" != "NOT_MAPPED" ]; then 408 if [ "$mapped" != "$path" ]; then 409 NEWBOOTPATH=`echo "$path " | \ 410 $SED -e"s|$path|$mapped|"`" $NEWBOOTPATH" 411 else 412 NEWBOOTPATH="$NEWBOOTPATH $path" 413 fi 414 fi 415 done 416 # now strip off leading and trailing space chars 417 new_bootpath=`echo $NEWBOOTPATH` 418 return 0 419} 420 421# 422# Emit a warning message to the user that by default we 423# operate on all multipath-capable controllers that are 424# attached to the system, and that if they want to operate 425# on only a specific controller type (fp|mpt|mpt_sas|pmcs|....) then 426# they need to re-invoke stmsboot with "-D $driver" in 427# their argument list 428# 429 430emit_driver_warning_msg() { 431 432 # for each driver that we support, grab the list 433 # of controllers attached to the system. 434 435 echo "" 436 gettext "WARNING: stmsboot operates on each supported multipath-capable controller\n" 437 gettext " detected in a host. In your system, these controllers are\n\n" 438 439 for WARNDRV in `echo $SUPPORTED_DRIVERS| $SED -e"s,|, ,g"`; do 440 $STMSBOOTUTIL -D $WARNDRV -n 441 done; 442 443 echo "" 444 gettext "If you do NOT wish to operate on these controllers, please quit stmsboot\n" 445 gettext "and re-invoke with -D { fp | mpt | mpt_sas | pmcs} to specify which controllers you wish\n" 446 gettext "to modify your multipathing configuration for.\n" 447 448 echo "" 449 gettext "Do you wish to continue? [y/n] (default: y) " 450 read response 451 452 if [ -n "$response" -a "$response" != "Y" -a \ 453 "$response" != "y" ]; then 454 exit 455 fi 456} 457 458 459# 460# 461# main starts here 462# 463 464cmd=none 465# process options 466while getopts D:geduLl: c 467do 468 case $c in 469 e) setcmd enable;; 470 d) setcmd disable;; 471 u) setcmd update;; 472 L) setcmd listall;; 473 l) setcmd list 474 controller=$OPTARG;; 475 D) DRV=$OPTARG;; 476 g) GUID="-g";; 477 \?) echo "$USAGE" 1>&2 478 exit 2;; 479 esac 480done 481 482if [ "$cmd" = "none" ]; then 483 echo "$USAGE" 1>&2 484 exit 2 485fi 486 487if [ -z "$DRV" ]; then 488 DRVLIST="fp mpt mpt_sas pmcs" 489else 490 DRVLIST=$DRV 491fi 492 493USERID=`id | $EGREP "uid=0"` 494if [ -z "$USERID" ]; then 495 gettext "You must be super-user to run this script.\n" 1>&2 496 exit 1 497fi 498 499# just a sanity check 500if [ ! -f $STMSBOOTUTIL -o ! -f $STMSMETHODSCRIPT ]; then 501 fmt=`gettext "Can't find %s and/or %s"` 502 printf "$fmt\n" "$STMSBOOTUTIL" "$STMSMETHODSCRIPT" 1>&2 503 exit 1 504fi 505 506# If the old sun4u-specific SMF method is found, remove it 507$SVCCFG -s "platform/sun4u/mpxio-upgrade:default" < /dev/null > /dev/null 2>&1 508if [ $? -eq 0 ]; then 509 $SVCCFG delete "platform/sun4u/mpxio-upgrade:default" > /dev/null 2>&1 510fi 511 512# now import the new service, if necessary 513$SVCPROP -q $STMSINSTANCE < /dev/null > /dev/null 2>&1 514if [ $? -ne 0 ]; then 515 if [ -f /var/svc/manifest/system/device/mpxio-upgrade.xml ]; then 516 $SVCCFG import /var/svc/manifest/system/device/mpxio-upgrade.xml 517 if [ $? -ne 0 ]; then 518 519 fmt=`gettext "Unable to import the %s service"` 520 printf "$fmt\n" "$STMSINSTANCE" 1>&2 521 exit 1 522 else 523 fmt=`gettext "Service %s imported successfully, continuing"` 524 printf "$fmt\n" "$STMSINSTANCE" 1>&2 525 fi 526 else 527 fmt=`gettext "Service %s does not exist on this host"` 528 printf "$fmt\n" "$STMSINSTANCE" 1>&2 529 exit 1 530 fi 531fi 532 533 534# make sure we can stash our data somewhere private 535if [ ! -d $SAVEDIR ]; then 536 $MKDIR -p $SAVEDIR 537fi 538# prime the cache 539$STMSBOOTUTIL -i 540 541 542if [ "$cmd" = "enable" -o "$cmd" = "disable" -o "$cmd" = "update" ]; then 543 # 544 # The bootup script doesn't work on cache-only-clients as the script 545 # is executed before the plumbing for cachefs mounting of root is done. 546 # 547 if $MOUNT -v | $EGREP -s " on / type (nfs|cachefs) "; then 548 gettext "This command option is not supported on systems with an nfs or cachefs mounted root filesystem.\n" 1>&2 549 exit 1 550 fi 551 552 # if the user has left the system with the mpxio-upgrade service 553 # in a temporarily disabled state (ie, service is armed for the next 554 # reboot), then let them know. We need to ensure that the system is 555 # is in a sane state before allowing any further invocations, so 556 # try to get the system admin to do so 557 558 ISARMED=`$SVCS -l $STMSINSTANCE|$GREP "enabled.*false.*temporary"` 559 if [ ! $? ]; then 560 echo "" 561 gettext "You need to reboot the system in order to complete\n" 562 gettext "the previous invocation of stmsboot.\n" 563 echo "" 564 gettext "Do you wish to reboot the system now? (y/n, default y) " 565 read response 566 567 if [ -z "$response" -o "x$response" = "Y" -o \ 568 "$response" = "y" ]; then 569 $REBOOT 570 else 571 echo "" 572 gettext "Please reboot this system before continuing\n" 573 echo "" 574 exit 1 575 fi 576 fi 577 578 # 579 # keep a copy of the last saved files, useful for manual 580 # recovery in case of a problem. 581 # 582 for d in $DRVLIST; do 583 DRVCONF=$d.conf 584 KDRVCONF=/kernel/drv/$d.conf 585 TMPDRVCONF=/var/run/tmp.$d.conf.$$ 586 TMPDRVCONF_MPXIO_ENTRY=/var/run/tmp.$d.conf.mpxioentry.$$; 587 if [ "$MACH" = "sparc" ]; then 588 backup_lastsaved $KDRVCONF $VFSTAB 589 else 590 backup_lastsaved $KDRVCONF $VFSTAB /boot/solaris/$BOOTENV_FILE 591 fi 592 done 593fi 594 595if [ "$cmd" = "enable" -o "$cmd" = "disable" ]; then 596 597 msgneeded=`echo "$DRVLIST" |grep " "` 598 if [ -n "$msgneeded" ]; then 599 emit_driver_warning_msg 600 fi 601 for d in $DRVLIST; do 602 configure_mpxio $cmd $d 603 done 604 605 if [ $reboot_needed -ne 0 ]; then 606 # Need to update bootpath on x86 if our boot device is 607 # now accessed through mpxio. 608 # Only update bootpath before reboot when mpxio is enabled 609 # If mpxio is currently disabled, we will update bootpath 610 # on reboot in the mpxio-upgrade service 611 612 if [ "$cmd" = "disable" ]; then 613 if [ "$MACH" = "i386" ]; then 614 get_newbootpath_for_stmsdev 615 if [ $? -ne 0 ]; then 616 $RM -f $TMPDRVCONF > /dev/null 2>&1 617 gettext "failed to update bootpath.\n" 1>&2 618 gettext "No changes were made to your STMS configuration.\n" 1>&2 619 return 1 620 fi 621 fi 622 # If we're not using ZFS root then we need 623 # to keep track of what / maps to in case 624 # it's an active-active device and we boot from 625 # the other path 626 ROOTSCSIVHCI=`$DF /|$AWK -F":" '{print $1}' | \ 627 $AWK -F"(" '{print $2}'| \ 628 $SED -e"s,dsk,rdsk," -e"s,s.[ ]*),,"` 629 $STMSBOOTUTIL -L | $GREP $ROOTSCSIVHCI | \ 630 $AWK '{print $1}' | $SED -e"s,rdsk,dsk,g" \ 631 >$BOOTDEVICES 632 fi 633 new_rootdev=`$DF /|$AWK -F":" '{print $1}' | \ 634 $AWK -F"(" '{print $2}'| \ 635 $SED -e"s,dsk,rdsk," -e"s,[ ]*),,"` 636 svm_md_device=`$STMSBOOTUTIL -m $new_rootdev` 637 update_sysfiles 638 else 639 echo "STMS is already ${cmd}d. No changes or reboots needed" 640 fi 641 642 643elif [ "$cmd" = "update" ]; then 644 if [ "$MACH" = "i386" ]; then 645 # In this case we always change the bootpath to phci-based 646 # path first. bootpath will later be modified in mpxio-upgrade 647 # to the vhci-based path if mpxio is enabled on root. 648 get_newbootpath_for_stmsdev 649 if [ $? -ne 0 ]; then 650 gettext "failed to update bootpath.\n" 1>&2 651 return 1 652 fi 653 fi 654 update_sysfiles 655 656elif [ "$cmd" = "list" ]; then 657 $STMSBOOTUTIL $GUID -l $controller 658else 659 $STMSBOOTUTIL $GUID -L 660fi 661 662exit $? 663