1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright (c) 1988 AT&T 24 * All Rights Reserved 25 * 26 * 27 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 28 * Use is subject to license terms. 29 */ 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 33 /* 34 * Run time linker common setup. 35 * 36 * Called from _setup to get the process going at startup. 37 */ 38 #include "_synonyms.h" 39 40 #include <stdlib.h> 41 #include <fcntl.h> 42 #include <stdio.h> 43 #include <sys/types.h> 44 #include <sys/stat.h> 45 #include <sys/mman.h> 46 #include <string.h> 47 #include <stdio.h> 48 #include <unistd.h> 49 #include <dlfcn.h> 50 #include <sys/sysconfig.h> 51 #include <sys/auxv.h> 52 #include "_rtld.h" 53 #include "_audit.h" 54 #include "_elf.h" 55 #include "_a.out.h" 56 #include "msg.h" 57 #include "debug.h" 58 #include "conv.h" 59 60 61 extern int _end, _edata, _etext; 62 extern void _init(void); 63 extern int _brk_unlocked(void *); 64 65 #ifndef SGS_PRE_UNIFIED_PROCESS 66 /* needed for _brk_unlocked() */ 67 void *_nd = &_end; 68 #endif 69 70 /* 71 * Define for the executable's interpreter. 72 * Usually it is ld.so.1, but for the first release of ICL binaries 73 * it is libc.so.1. We keep this information so that we don't end 74 * up mapping libc twice if it is the interpreter. 75 */ 76 static Interp _interp; 77 78 79 static int 80 preload(const char *str, Rt_map *lmp) 81 { 82 Rt_map *clmp = lmp; 83 char *objs, *ptr, *next; 84 Word lmflags = lml_main.lm_flags; 85 uint_t flags; 86 87 DBG_CALL(Dbg_util_nl()); 88 89 if ((objs = strdup(str)) == 0) 90 return (0); 91 92 /* 93 * Establish the flags for loading each object. If we're called via 94 * lddstub, then the first shared object is the object being inspected 95 * by ldd(1). This object should not be marked as an interposer, as 96 * it is intended to act like the first object of the process. 97 */ 98 if ((lmflags & LML_FLG_TRC_ENABLE) && (FLAGS1(lmp) & FL1_RT_LDDSTUB)) 99 flags = FLG_RT_PRELOAD; 100 else 101 flags = (FLG_RT_PRELOAD | FLG_RT_INTRPOSE); 102 103 ptr = strtok_r(objs, MSG_ORIG(MSG_STR_DELIMIT), &next); 104 do { 105 Pnode *pnp; 106 Rt_map *nlmp = 0; 107 108 DBG_CALL(Dbg_file_preload(ptr)); 109 110 /* 111 * If this a secure application, then preload errors are 112 * reduced to warnings, as the errors are non-fatal. 113 */ 114 if (rtld_flags & RT_FL_SECURE) 115 rtld_flags2 |= RT_FL2_FTL2WARN; 116 if ((pnp = expand_paths(clmp, ptr, PN_SER_EXTLOAD, 0)) != 0) 117 nlmp = load_one(&lml_main, ALO_DATA, pnp, clmp, 118 MODE(lmp), flags, 0); 119 if (pnp) 120 remove_pnode(pnp); 121 if (rtld_flags & RT_FL_SECURE) 122 rtld_flags2 &= ~RT_FL2_FTL2WARN; 123 if (nlmp && (bind_one(clmp, nlmp, BND_NEEDED) == 0)) 124 nlmp = 0; 125 126 /* 127 * Establish state for the next preloadable object. If no 128 * error occurred with loading this object, indicate that this 129 * link-map list contains an interposer. 130 */ 131 flags |= FLG_RT_INTRPOSE; 132 if (nlmp == 0) { 133 if ((lmflags & LML_FLG_TRC_ENABLE) || 134 (rtld_flags & RT_FL_SECURE)) 135 continue; 136 else 137 return (0); 138 } 139 lml_main.lm_flags |= LML_FLG_INTRPOSE; 140 141 /* 142 * If we're tracing shared objects via lddstub, establish a 143 * binding between the initial shared object and lddstub so that 144 * the shared object isn't called out from unused() processing. 145 * After the first object is loaded increment the caller to the 146 * initial preloaded object to provide intuitive ldd -v and -s 147 * diagnostics 148 */ 149 if ((lmflags & LML_FLG_TRC_ENABLE) && 150 (FLAGS1(lmp) & FL1_RT_LDDSTUB)) { 151 if ((lmp == clmp) && (lmflags & 152 (LML_FLG_TRC_UNREF | LML_FLG_TRC_UNUSED))) { 153 if (bind_one(clmp, nlmp, BND_REFER) == 0) 154 continue; 155 } 156 clmp = (Rt_map *)NEXT(lmp); 157 } 158 159 } while ((ptr = strtok_r(NULL, 160 MSG_ORIG(MSG_STR_DELIMIT), &next)) != NULL); 161 162 free(objs); 163 return (1); 164 } 165 166 Rt_map * 167 setup(char **envp, auxv_t *auxv, Word _flags, char *_platform, int _syspagsz, 168 char *_rtldname, Dyn *dyn_ptr, ulong_t ld_base, ulong_t interp_base, int fd, 169 Phdr *phdr, char *execname, char **argv, int dz_fd, uid_t uid, 170 uid_t euid, gid_t gid, gid_t egid, void *aoutdyn, int auxflags, 171 uint_t hwcap_1) 172 { 173 Rt_map *rlmp, *mlmp, **tobj = 0; 174 Ehdr *ehdr; 175 struct stat status; 176 int features = 0, ldsoexec = 0; 177 size_t eaddr, esize; 178 char *str, *argvname; 179 Mmap *mmaps; 180 181 /* 182 * Now that ld.so has relocated itself, initialize our own 'environ' so 183 * as to establish an address suitable for libc's hardware mul/div 184 * magic (libc/sparc/crt/hwmuldiv.o). 185 */ 186 _environ = (char **)((ulong_t)auxv - sizeof (char *)); 187 _init(); 188 _environ = envp; 189 190 /* 191 * Far the most common application execution revolves around appending 192 * the application name to the users PATH definition, thus a full name 193 * is passed to exec() which will in turn be returned via 194 * AT_SUN_EXECNAME. Applications may also be invoked from the current 195 * working directory, or via a relative name. 196 * 197 * Determine whether the kernel has supplied a AT_SUN_EXECNAME aux 198 * vector. This vector points to the full pathname, on the stack, of 199 * the object that started the process. If this is null, then 200 * AT_SUN_EXECNAME isn't supported (if the pathname exceeded the system 201 * limit (PATH_MAX) the exec would have failed). This flag is used to 202 * determine whether we can call resolvepath(). 203 */ 204 if (execname) 205 rtld_flags |= RT_FL_EXECNAME; 206 207 /* 208 * Determine how ld.so.1 has been executed. 209 */ 210 if ((fd == -1) && (phdr == 0)) { 211 /* 212 * If we received neither the AT_EXECFD nor the AT_PHDR aux 213 * vector, ld.so.1 must have been invoked directly from the 214 * command line. 215 */ 216 ldsoexec = 1; 217 218 /* 219 * AT_SUN_EXECNAME provides the most precise name, if it is 220 * available, otherwise fall back to argv[0]. At this time, 221 * there is no process name. 222 */ 223 if (execname) 224 rtldname = execname; 225 else if (argv[0]) 226 rtldname = argv[0]; 227 else 228 rtldname = (char *)MSG_INTL(MSG_STR_UNKNOWN); 229 } else { 230 /* 231 * Otherwise, we have a standard process. AT_SUN_EXECNAME 232 * provides the most precise name, if it is available, 233 * otherwise fall back to argv[0]. Provided the application 234 * is already mapped, the process is the application, so 235 * simplify the application name for use in any diagnostics. 236 */ 237 if (execname) 238 argvname = execname; 239 else if (argv[0]) 240 argvname = execname = argv[0]; 241 else 242 argvname = execname = (char *)MSG_INTL(MSG_STR_UNKNOWN); 243 244 if (fd == -1) { 245 if ((str = strrchr(argvname, '/')) != 0) 246 procname = ++str; 247 else 248 procname = argvname; 249 } 250 251 /* 252 * At this point, we don't know the runtime linkers full path 253 * name. The _rtldname passed to us is the SONAME of the 254 * runtime linker, which is typically /lib/ld.so.1 no matter 255 * what the full path is. Use this for now, we'll reset the 256 * runtime linkers name once the application is analyzed. 257 */ 258 if (_rtldname) { 259 if ((str = strrchr(_rtldname, '/')) != 0) 260 rtldname = ++str; 261 else 262 rtldname = _rtldname; 263 } else 264 rtldname = (char *)MSG_INTL(MSG_STR_UNKNOWN); 265 } 266 267 /* 268 * Initialize any global variables. 269 */ 270 at_flags = _flags; 271 if (dz_fd != FD_UNAVAIL) 272 dz_init(dz_fd); 273 platform = _platform; 274 275 /* 276 * If pagesize is unspecified find its value. 277 */ 278 if ((syspagsz = _syspagsz) == 0) 279 syspagsz = _sysconfig(_CONFIG_PAGESIZE); 280 fmap_setup(); 281 282 /* 283 * Add the unused portion of the last data page to the free space list. 284 * The page size must be set before doing this. Here, _end refers to 285 * the end of the runtime linkers bss. Note that we do not use the 286 * unused data pages from any included .so's to supplement this free 287 * space as badly behaved .os's may corrupt this data space, and in so 288 * doing ruin our data. 289 */ 290 eaddr = S_DROUND((size_t)&_end); 291 esize = eaddr % syspagsz; 292 if (esize) { 293 esize = syspagsz - esize; 294 addfree((void *)eaddr, esize); 295 } 296 297 /* 298 * Establish initial link-map list flags, and link-map list alists. 299 */ 300 if (alist_append(&lml_main.lm_lists, 0, sizeof (Lm_cntl), 301 AL_CNT_LMLISTS) == 0) 302 return (0); 303 lml_main.lm_flags |= LML_FLG_BASELM; 304 305 if (alist_append(&lml_rtld.lm_lists, 0, sizeof (Lm_cntl), 306 AL_CNT_LMLISTS) == 0) 307 return (0); 308 lml_rtld.lm_flags |= (LML_FLG_RTLDLM | LML_FLG_NOAUDIT | 309 LML_FLG_HOLDLOCK); 310 311 /* 312 * Determine whether we have a secure executable. 313 */ 314 security(uid, euid, gid, egid, auxflags); 315 316 /* 317 * Initialize a hardware capability descriptor for use in comparing 318 * each loaded object. 319 */ 320 #ifdef AT_SUN_AUXFLAGS 321 if (auxflags & AF_SUN_HWCAPVERIFY) { 322 rtld_flags2 |= RT_FL2_HWCAP; 323 hwcap = (ulong_t)hwcap_1; 324 } 325 #endif 326 /* 327 * Look for environment strings (allows things like LD_NOAUDIT to be 328 * established, although debugging isn't enabled until later). 329 */ 330 if ((readenv_user((const char **)envp, &(lml_main.lm_flags), 331 &(lml_main.lm_tflags), (aoutdyn != 0))) == 1) 332 return (0); 333 334 /* 335 * Create a mapping descriptor for ld.so.1. We can determine our 336 * two segments information from known symbols. 337 */ 338 if ((mmaps = calloc(3, sizeof (Mmap))) == 0) 339 return (0); 340 mmaps[0].m_vaddr = (caddr_t)M_PTRUNC(ld_base); 341 mmaps[0].m_msize = (size_t)((caddr_t)&_etext - mmaps[0].m_vaddr); 342 mmaps[0].m_fsize = mmaps[0].m_msize; 343 mmaps[0].m_perm = (PROT_READ | PROT_EXEC); 344 mmaps[1].m_vaddr = (caddr_t)M_PTRUNC((ulong_t)&r_debug); 345 mmaps[1].m_msize = (size_t)((caddr_t)&_end - mmaps[1].m_vaddr); 346 mmaps[1].m_fsize = (size_t)((caddr_t)&_edata - mmaps[1].m_vaddr); 347 mmaps[1].m_perm = (PROT_READ | PROT_WRITE | PROT_EXEC); 348 349 /* 350 * Create a link map structure for ld.so.1. 351 */ 352 if ((rlmp = elf_new_lm(&lml_rtld, _rtldname, rtldname, dyn_ptr, ld_base, 353 (ulong_t)&_etext, ALO_DATA, (ulong_t)(eaddr - ld_base), 0, ld_base, 354 (ulong_t)(eaddr - ld_base), mmaps, 2)) == 0) { 355 return (0); 356 } 357 358 MODE(rlmp) |= (RTLD_LAZY | RTLD_NODELETE | RTLD_GLOBAL | RTLD_WORLD); 359 FLAGS(rlmp) |= (FLG_RT_ANALYZED | FLG_RT_RELOCED | FLG_RT_INITDONE | 360 FLG_RT_INITCLCT | FLG_RT_FINICLCT | FLG_RT_MODESET); 361 362 /* 363 * Initialize the runtime linkers information. 364 */ 365 interp = &_interp; 366 interp->i_name = NAME(rlmp); 367 interp->i_faddr = (caddr_t)ADDR(rlmp); 368 ldso_plt_init(rlmp); 369 370 /* 371 * If ld.so.1 has been invoked directly, process its arguments. 372 */ 373 if (ldsoexec) { 374 /* 375 * Process any arguments that are specific to ld.so.1, and 376 * reorganize the process stack to effectively remove ld.so.1 377 * from it. Reinitialize the environment pointer, as this may 378 * have been shifted after skipping ld.so.1's arguments. 379 */ 380 if (rtld_getopt(argv, &envp, &auxv, &(lml_main.lm_flags), 381 &(lml_main.lm_tflags), (aoutdyn != 0)) == 1) { 382 eprintf(ERR_NONE, MSG_INTL(MSG_USG_BADOPT)); 383 return (0); 384 } 385 _environ = envp; 386 387 /* 388 * Open the object that ld.so.1 is to execute. 389 */ 390 argvname = execname = argv[0]; 391 392 if ((fd = open(argvname, O_RDONLY)) == -1) { 393 int err = errno; 394 eprintf(ERR_FATAL, MSG_INTL(MSG_SYS_OPEN), argvname, 395 strerror(err)); 396 return (0); 397 } 398 } 399 400 /* 401 * Map in the file, if exec has not already done so. If it has, 402 * simply create a new link map structure for the executable. 403 */ 404 if (fd != -1) { 405 Rej_desc rej; 406 Fct *ftp; 407 408 /* 409 * Find out what type of object we have. 410 */ 411 (void) fstat(fd, &status); 412 if ((ftp = are_u_this(&rej, fd, &status, argvname)) == 0) { 413 eprintf(ERR_FATAL, MSG_INTL(err_reject[rej.rej_type]), 414 argvname, conv_reject_str(&rej)); 415 return (0); 416 } 417 418 /* 419 * Map in object. 420 */ 421 if ((mlmp = (ftp->fct_map_so)(&lml_main, ALO_DATA, execname, 422 argvname, fd)) == 0) 423 return (0); 424 425 /* 426 * We now have a process name for error diagnostics. 427 */ 428 if ((str = strrchr(argvname, '/')) != 0) 429 procname = ++str; 430 else 431 procname = argvname; 432 433 if (ldsoexec) { 434 Addr brkbase = 0; 435 436 /* 437 * Since ld.so.1 was the primary executed object - the 438 * brk() base has not yet been initialized, we need to 439 * initialize it. For an executable, initialize it to 440 * the end of the object. For a shared object (ET_DYN) 441 * initialize it to the first page in memory. 442 */ 443 ehdr = (Ehdr *)ADDR(mlmp); 444 445 if ((FCT(mlmp) == &elf_fct) && 446 (ehdr->e_type == ET_EXEC)) { 447 int i; 448 Phdr * _phdr = (Phdr *)((uintptr_t)ADDR(mlmp) + 449 ehdr->e_phoff); 450 451 /* 452 * We scan the program headers to find the tail 453 * of the memory image. We can't use MSIZE() 454 * since that's already been page aligned. 455 */ 456 for (i = 0; i < ehdr->e_phnum; i++, _phdr++) { 457 if (_phdr->p_type == PT_LOAD) 458 brkbase = _phdr->p_vaddr + 459 _phdr->p_memsz; 460 } 461 } 462 463 if (!brkbase) 464 brkbase = syspagsz; 465 466 if (_brk_unlocked((void *)brkbase) == -1) { 467 int err = errno; 468 eprintf(ERR_FATAL, MSG_INTL(MSG_SYS_BRK), 469 argvname, strerror(err)); 470 } 471 } 472 473 /* 474 * The object has now been mmaped, we no longer need the file 475 * descriptor. 476 */ 477 (void) close(fd); 478 479 } else { 480 /* 481 * Set up function ptr and arguments according to the type 482 * of file class the executable is. (Currently only supported 483 * types are ELF and a.out format.) Then create a link map 484 * for the executable. 485 */ 486 if (aoutdyn) { 487 #ifdef A_OUT 488 if ((mlmp = aout_new_lm(&lml_main, execname, argvname, 489 aoutdyn, 0, 0, ALO_DATA)) == 0) 490 return (0); 491 492 /* 493 * Set the memory size. Note, we only know the end of 494 * text, and although we could find the _end by looking 495 * up the symbol, this may not be present. We should 496 * set ADDR to MAIN_BASE, but presently all the a.out 497 * relocation code assumes ADDR is 0 for the dynamic 498 * executable. (these data items are only used for 499 * dladdr(3x), and there aren't many a.out dladdr(3x) 500 * users to warrant spending much time on this :-). 501 */ 502 MSIZE(mlmp) = MAIN_BASE + ETEXT(mlmp); 503 504 /* 505 * Disable any object configuration cache (BCP apps 506 * bring in sbcp which can benefit from any object 507 * cache, but both the app and sbcp can't use the same 508 * objects). 509 */ 510 rtld_flags |= RT_FL_NOOBJALT; 511 512 /* 513 * Make sure no-direct bindings are in effect. 514 */ 515 lml_main.lm_tflags |= LML_TFLG_NODIRECT; 516 #else 517 eprintf(ERR_FATAL, MSG_INTL(MSG_ERR_REJ_UNKFILE), 518 argvname); 519 return (0); 520 #endif 521 } else if (phdr) { 522 Phdr *pptr, *firstptr = 0, *lastptr; 523 Phdr *tlsphdr = 0, *unwindphdr = 0; 524 Dyn *dyn = 0; 525 Cap *cap = 0; 526 Off i_offset = 0; 527 Addr base = 0; 528 ulong_t memsize, phsize, entry, etext; 529 uint_t mmapcnt = 0; 530 int i; 531 532 /* 533 * Using the executables phdr address determine the base 534 * address of the input file. NOTE, this assumes the 535 * program headers and elf header are part of the same 536 * mapped segment. Although this has held for many 537 * years now, it might be more flexible if the kernel 538 * gave use the ELF headers start address, rather than 539 * the Program headers. 540 * 541 * Determine from the ELF header if we're been called 542 * from a shared object or dynamic executable. If the 543 * latter, then any addresses within the object are used 544 * as is. Addresses within shared objects must be added 545 * to the process's base address. 546 */ 547 ehdr = (Ehdr *)((Addr)phdr - phdr->p_offset); 548 phsize = ehdr->e_phentsize; 549 if (ehdr->e_type == ET_DYN) 550 base = (Addr)ehdr; 551 552 /* 553 * Allocate a mapping array to retain mapped segment 554 * information. 555 */ 556 if ((mmaps = calloc(ehdr->e_phnum, sizeof (Mmap))) == 0) 557 return (0); 558 559 /* 560 * Extract the needed information from the segment 561 * headers. 562 */ 563 for (i = 0, pptr = phdr; i < ehdr->e_phnum; i++) { 564 if (pptr->p_type == PT_INTERP) { 565 i_offset = pptr->p_offset; 566 interp->i_faddr = 567 (caddr_t)interp_base; 568 } 569 if ((pptr->p_type == PT_LOAD) && 570 (pptr->p_filesz || pptr->p_memsz)) { 571 int perm = (PROT_READ | PROT_EXEC); 572 size_t off; 573 574 if (!firstptr) 575 firstptr = pptr; 576 lastptr = pptr; 577 if (i_offset && pptr->p_filesz && 578 (i_offset >= pptr->p_offset) && 579 (i_offset <= 580 (pptr->p_memsz + pptr->p_offset))) { 581 interp->i_name = (char *) 582 pptr->p_vaddr + i_offset - 583 pptr->p_offset + base; 584 i_offset = 0; 585 } 586 if ((pptr->p_flags & 587 (PF_R | PF_W)) == PF_R) 588 etext = pptr->p_vaddr + 589 pptr->p_memsz + base; 590 else 591 perm |= PROT_WRITE; 592 593 /* 594 * Retain segments mapping info. Round 595 * each segment to a page boundary, as 596 * this insures addresses are suitable 597 * for mprotect() if required. 598 */ 599 off = pptr->p_vaddr + base; 600 mmaps[mmapcnt].m_vaddr = 601 (caddr_t)M_PTRUNC(off); 602 off -= (size_t)mmaps[mmapcnt].m_vaddr; 603 mmaps[mmapcnt].m_msize = 604 pptr->p_memsz + off; 605 mmaps[mmapcnt].m_fsize = 606 pptr->p_filesz + off; 607 mmaps[mmapcnt].m_perm = perm; 608 mmapcnt++; 609 610 } else if (pptr->p_type == PT_DYNAMIC) 611 dyn = (Dyn *)(pptr->p_vaddr + base); 612 else if (pptr->p_type == PT_TLS) 613 tlsphdr = pptr; 614 else if (pptr->p_type == PT_SUNW_UNWIND) 615 unwindphdr = pptr; 616 else if (pptr->p_type == PT_SUNWCAP) 617 cap = (Cap *)(pptr->p_vaddr + base); 618 pptr = (Phdr *)((ulong_t)pptr + phsize); 619 } 620 621 622 memsize = (lastptr->p_vaddr + lastptr->p_memsz) - 623 S_ALIGN(firstptr->p_vaddr, syspagsz); 624 625 entry = ehdr->e_entry; 626 if (ehdr->e_type == ET_DYN) 627 entry += (ulong_t)ehdr; 628 629 if ((mlmp = elf_new_lm(&lml_main, execname, argvname, 630 dyn, (Addr)ehdr, etext, ALO_DATA, memsize, entry, 631 (ulong_t)ehdr, memsize, mmaps, mmapcnt)) == 0) { 632 return (0); 633 } 634 if (tlsphdr) { 635 PTTLS(mlmp) = tlsphdr; 636 tls_assign_soffset(mlmp); 637 } 638 if (unwindphdr) 639 PTUNWIND(mlmp) = unwindphdr; 640 if (cap) 641 cap_assign(cap, mlmp); 642 } 643 } 644 645 /* 646 * Establish the interpretors name as that defined within the initial 647 * object (executable). This provides for ORIGIN processing of ld.so.1 648 * dependencies. 649 */ 650 if (ldsoexec == 0) { 651 size_t len = strlen(interp->i_name); 652 (void) expand(&interp->i_name, &len, 0, 0, 653 (PN_TKN_ISALIST | PN_TKN_HWCAP), rlmp); 654 } 655 PATHNAME(rlmp) = interp->i_name; 656 657 if (FLAGS1(rlmp) & FL1_RT_RELATIVE) 658 (void) fullpath(rlmp, 0); 659 else 660 ORIGNAME(rlmp) = PATHNAME(rlmp) = NAME(rlmp); 661 662 /* 663 * Having established the true runtime linkers name, simplify the name 664 * for error diagnostics. 665 */ 666 if ((str = strrchr(PATHNAME(rlmp), '/')) != 0) 667 rtldname = ++str; 668 else 669 rtldname = PATHNAME(rlmp); 670 671 /* 672 * Expand the fullpath name of the application. This typically occurs 673 * as a part of loading an object, but as the kernel probably mapped 674 * it in, complete this processing now. 675 */ 676 if (FLAGS1(mlmp) & FL1_RT_RELATIVE) 677 (void) fullpath(mlmp, 0); 678 679 /* 680 * Some troublesome programs will change the value of argv[0]. Dupping 681 * the process string protects us, and insures the string is left in 682 * any core files. 683 */ 684 if ((str = (char *)strdup(procname)) == 0) 685 return (0); 686 procname = str; 687 688 /* 689 * If the kernel has provided hardware capabilities information, and 690 * the executable contains hardware capabilities information, make 691 * sure it's a valid object. 692 */ 693 if ((rtld_flags2 & RT_FL2_HWCAP) && HWCAP(mlmp)) { 694 ulong_t mhwcap; 695 696 if ((mhwcap = (HWCAP(mlmp) & ~hwcap)) != 0) { 697 if (lml_main.lm_flags & LML_FLG_TRC_ENABLE) { 698 (void) printf(MSG_INTL(MSG_LDD_GEN_HWCAP_1), 699 NAME(mlmp), 700 conv_hwcap_1_str(mhwcap, M_MACH)); 701 } else { 702 eprintf(ERR_FATAL, MSG_INTL(MSG_GEN_BADHWCAP_1), 703 conv_hwcap_1_str(mhwcap, M_MACH)); 704 return (0); 705 } 706 } 707 } 708 709 FLAGS(mlmp) |= (FLG_RT_ISMAIN | FLG_RT_MODESET); 710 FLAGS1(mlmp) |= FL1_RT_USED; 711 if ((INITARRAY(mlmp) == 0) && (FINIARRAY(mlmp) == 0)) 712 FLAGS1(mlmp) |= FL1_RT_NOINIFIN; 713 714 /* 715 * Identify lddstub if necessary. 716 */ 717 if (lml_main.lm_flags & LML_FLG_TRC_LDDSTUB) 718 FLAGS1(mlmp) |= FL1_RT_LDDSTUB; 719 720 /* 721 * Retain our argument information for use in dlinfo. 722 */ 723 argsinfo.dla_argv = argv--; 724 argsinfo.dla_argc = (long)*argv; 725 argsinfo.dla_envp = envp; 726 argsinfo.dla_auxv = auxv; 727 728 (void) enter(); 729 730 /* 731 * If no .initarray or .finiarray are present on the executable do not 732 * enter them into the 'sorting' mechanism for .init/.fini firing. 733 * 734 * This is to prevent them showing up during 'ldd -i ...' 735 * output when they don't do anything. 736 */ 737 if (INITARRAY(mlmp) == 0) { 738 FLAGS(mlmp) |= (FLG_RT_INITCLCT | FLG_RT_INITCALL | 739 FLG_RT_INITDONE); 740 LIST(mlmp)->lm_init--; 741 } 742 743 if (FINIARRAY(mlmp) == 0) 744 FLAGS(mlmp) |= FLG_RT_FINICLCT; 745 746 /* 747 * Add our two main link-maps to the dynlm_list 748 */ 749 if (list_append(&dynlm_list, &lml_main) == 0) 750 return (0); 751 752 if (list_append(&dynlm_list, &lml_rtld) == 0) 753 return (0); 754 755 /* 756 * Reset the link-map counts for both lists. The init count is used to 757 * track how many objects have pending init sections, this gets incre- 758 * mented each time an object is relocated. Since ld.so.1 relocates 759 * itself, it's init count will remain zero. 760 * The object count is used to track how many objects have pending fini 761 * sections, as ld.so.1 handles its own fini we can zero its count. 762 */ 763 lml_main.lm_obj = 1; 764 lml_rtld.lm_obj = 0; 765 766 /* 767 * Initialize debugger information structure. Some parts of this 768 * structure were initialized statically. 769 */ 770 r_debug.rtd_rdebug.r_map = (Link_map *)lml_main.lm_head; 771 r_debug.rtd_rdebug.r_ldsomap = (Link_map *)lml_rtld.lm_head; 772 r_debug.rtd_rdebug.r_ldbase = r_debug.rtd_rdebug.r_ldsomap->l_addr; 773 r_debug.rtd_dynlmlst = &dynlm_list; 774 775 if (platform) 776 platform_sz = strlen(platform); 777 778 /* 779 * Determine the dev/inode information for the executable to complete 780 * load_so() checking for those who might dlopen(a.out). 781 */ 782 if ((FLAGS1(mlmp) & FL1_RT_RELATIVE) && 783 (stat(PATHNAME(mlmp), &status) == 0)) { 784 STDEV(mlmp) = status.st_dev; 785 STINO(mlmp) = status.st_ino; 786 } 787 788 /* 789 * Initialize any configuration information. 790 */ 791 if (!(rtld_flags & RT_FL_NOCFG)) { 792 if ((features = elf_config(mlmp, (aoutdyn != 0))) == -1) 793 return (0); 794 } 795 796 /* 797 * Establish the modes of the initial object. These modes are 798 * propagated to any preloaded objects and explicit shared library 799 * dependencies. Note, RTLD_NOW may have been established during 800 * analysis of the application had it been built -z now. 801 */ 802 MODE(mlmp) |= (RTLD_NODELETE | RTLD_GLOBAL | RTLD_WORLD); 803 if (rtld_flags & RT_FL_CONFGEN) 804 MODE(mlmp) |= RTLD_CONFGEN; 805 if ((MODE(mlmp) & RTLD_NOW) == 0) { 806 if (rtld_flags2 & RT_FL2_BINDNOW) 807 MODE(mlmp) |= RTLD_NOW; 808 else 809 MODE(mlmp) |= RTLD_LAZY; 810 } 811 812 /* 813 * If debugging was requested initialize things now that any cache has 814 * been established. 815 */ 816 if (rpl_debug) 817 dbg_mask |= dbg_setup(rpl_debug); 818 if (prm_debug) 819 dbg_mask |= dbg_setup(prm_debug); 820 821 /* 822 * Now that debugging is enabled generate any diagnostics from any 823 * previous events. 824 */ 825 if (hwcap) 826 DBG_CALL(Dbg_cap_hw_1(hwcap, M_MACH)); 827 if (features) 828 DBG_CALL(Dbg_file_config_dis(config->c_name, features)); 829 830 if (dbg_mask) { 831 DBG_CALL(Dbg_file_ldso(PATHNAME(rlmp), (ulong_t)DYN(rlmp), 832 ADDR(rlmp), envp, auxv)); 833 834 if (FCT(mlmp) == &elf_fct) { 835 DBG_CALL(Dbg_file_elf(PATHNAME(mlmp), 836 (ulong_t)DYN(mlmp), ADDR(mlmp), MSIZE(mlmp), 837 ENTRY(mlmp), get_linkmap_id(LIST(mlmp)), ALO_DATA)); 838 } else { 839 DBG_CALL(Dbg_file_aout(PATHNAME(mlmp), 840 (ulong_t)AOUTDYN(mlmp), (ulong_t)ADDR(mlmp), 841 (ulong_t)MSIZE(mlmp))); 842 } 843 } 844 845 /* 846 * Enable auditing. 847 */ 848 if (rpl_audit || prm_audit || profile_lib) { 849 int ndx; 850 const char *aud[3]; 851 852 aud[0] = rpl_audit; 853 aud[1] = prm_audit; 854 aud[2] = profile_lib; 855 856 /* 857 * Any global auditing (set using LD_AUDIT or LD_PROFILE) that 858 * can't be established is non-fatal. 859 */ 860 if ((auditors = calloc(1, sizeof (Audit_desc))) == 0) 861 return (0); 862 863 for (ndx = 0; ndx < 3; ndx++) { 864 if (aud[ndx]) { 865 if ((auditors->ad_name = strdup(aud[ndx])) == 0) 866 return (0); 867 rtld_flags2 |= RT_FL2_FTL2WARN; 868 (void) audit_setup(mlmp, auditors); 869 rtld_flags2 &= ~RT_FL2_FTL2WARN; 870 } 871 } 872 lml_main.lm_tflags |= auditors->ad_flags; 873 } 874 if (AUDITORS(mlmp)) { 875 /* 876 * Any object required auditing (set with a DT_DEPAUDIT dynamic 877 * entry) that can't be established is fatal. 878 */ 879 if (audit_setup(mlmp, AUDITORS(mlmp)) == 0) 880 return (0); 881 882 FLAGS1(mlmp) |= AUDITORS(mlmp)->ad_flags; 883 lml_main.lm_flags |= LML_FLG_LOCAUDIT; 884 } 885 886 /* 887 * Explicitly add the initial object and ld.so.1 to those objects being 888 * audited. Note, although the ld.so.1 link-map isn't auditable, 889 * establish a cookie for ld.so.1 as this may be bound to via the 890 * dl*() family. 891 */ 892 if ((lml_main.lm_tflags | FLAGS1(mlmp)) & LML_TFLG_AUD_MASK) { 893 if (((audit_objopen(mlmp, mlmp) == 0) || 894 (audit_objopen(mlmp, rlmp) == 0)) && 895 (FLAGS1(mlmp) & LML_TFLG_AUD_MASK)) 896 return (0); 897 } 898 899 /* 900 * Map in any preloadable shared objects. Note, it is valid to preload 901 * a 4.x shared object with a 5.0 executable (or visa-versa), as this 902 * functionality is required by ldd(1). 903 */ 904 if (rpl_preload && (preload(rpl_preload, mlmp) == 0)) 905 return (0); 906 if (prm_preload && (preload(prm_preload, mlmp) == 0)) 907 return (0); 908 909 /* 910 * Load all dependent (needed) objects. 911 */ 912 if (analyze_lmc(&lml_main, ALO_DATA, mlmp) == 0) 913 return (0); 914 915 /* 916 * Relocate all the dependencies we've just added. 917 * 918 * If this process has been established via crle(1), the environment 919 * variable LD_CONFGEN will have been set. crle(1) may create this 920 * process twice. The first time crle only needs to gather dependency 921 * information. The second time, is to dldump() the images. 922 * 923 * If we're only gathering dependencies, relocation is unnecessary. 924 * As crle(1) may be building an arbitrary family of objects, they may 925 * not fully relocate either. Hence the relocation phase is not carried 926 * out now, but will be called by crle(1) once all objects have been 927 * loaded. 928 */ 929 if ((rtld_flags & RT_FL_CONFGEN) == 0) { 930 Word lmflags; 931 932 DBG_CALL(Dbg_file_nl()); 933 934 if (relocate_lmc(&lml_main, ALO_DATA, mlmp) == 0) 935 return (0); 936 937 /* 938 * Sort the .init sections of all objects we've added. If 939 * we're tracing we only need to execute this under ldd(1) 940 * with the -i or -u options. 941 */ 942 lmflags = lml_main.lm_flags; 943 if (((lmflags & LML_FLG_TRC_ENABLE) == 0) || 944 (lmflags & (LML_FLG_TRC_INIT | LML_FLG_TRC_UNREF))) { 945 if ((tobj = tsort(mlmp, LIST(mlmp)->lm_init, 946 RT_SORT_REV)) == (Rt_map **)S_ERROR) 947 return (0); 948 } 949 950 /* 951 * If we are tracing we're done. This is the one legitimate use 952 * of a direct call to rtldexit() rather than return, as we 953 * don't want to return and jump to the application. 954 */ 955 if (lmflags & LML_FLG_TRC_ENABLE) { 956 unused(&lml_main); 957 rtldexit(&lml_main, 0); 958 } 959 960 /* 961 * Inform the debuggers we're here and stable. Newer debuggers 962 * can indicate their presence by setting the DT_DEBUG entry in 963 * the dynamic executable (see elf_new_lm()). In this case call 964 * getpid() so the debugger can catch the system call. This 965 * handshake allows the debugger to initialize, and consequently 966 * allows the user to set break points in .init code. 967 */ 968 rd_event(&lml_rtld, RD_DLACTIVITY, RT_CONSISTENT); 969 rd_event(&lml_main, RD_DLACTIVITY, RT_CONSISTENT); 970 971 if (rtld_flags & RT_FL_DEBUGGER) { 972 r_debug.rtd_rdebug.r_flags |= RD_FL_ODBG; 973 (void) getpid(); 974 } 975 976 /* 977 * Initialize any initial TLS storage. 978 */ 979 if (tls_report_modules() == 0) 980 return (0); 981 } 982 983 /* 984 * Call any necessary auditing routines, clean up any file descriptors 985 * and such, and then fire all dependencies .init sections. 986 */ 987 rtld_flags |= RT_FL_APPLIC; 988 989 rd_event(&lml_main, RD_PREINIT, 0); 990 991 if ((lml_main.lm_tflags | FLAGS1(mlmp)) & LML_TFLG_AUD_ACTIVITY) 992 audit_activity(mlmp, LA_ACT_CONSISTENT); 993 if ((lml_main.lm_tflags | FLAGS1(mlmp)) & LML_TFLG_AUD_PREINIT) 994 audit_preinit(mlmp); 995 996 call_array(PREINITARRAY(mlmp), (uint_t)PREINITARRAYSZ(mlmp), mlmp, 997 SHT_PREINIT_ARRAY); 998 999 if (tobj) 1000 call_init(tobj, DBG_INIT_SORT); 1001 1002 rd_event(&lml_main, RD_POSTINIT, 0); 1003 1004 unused(&lml_main); 1005 1006 DBG_CALL(Dbg_util_call_main(NAME(mlmp))); 1007 1008 leave(LIST(mlmp)); 1009 1010 return (mlmp); 1011 } 1012