1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright (c) 1996, 2010, Oracle and/or its affiliates. All rights reserved. 24# 25 26@ _START_ 27 28# Message file for cmd/sgs/liblddbg. 29 30@ MSG_ID_LIBLDDBG 31 32 33# Usage messages 34 35@ MSG_USE_UNRECOG "warning: unrecognized debug option (try help): %s" 36@ MSG_USE_CNTNEGOPT "warning: ignoring non-negatable debug option: %s" 37 38@ MSG_USE_HDR_DCT "Display Control Tokens:" 39@ MSG_USE_HDR_CST "Category Selection Tokens:" 40@ MSG_USE_HDR_BOTH " [ld and ld.so.1]" 41@ MSG_USE_HDR_RTLD " [ld.so.1 only]" 42@ MSG_USE_HDR_LD " [ld only]" 43 44# TRANSLATION_NOTE - Use the following output in the C locale as reference 1. 45# 46# The runtime linker and link-editor support a shared debugging 47# facility. Options are selected via a comma separated list of tokens, 48# each of which specifies a display option or a category for which 49# information is desired. Many tokens apply to both linker components, 50# while some are specific to one or the other. Diagnostics are printed, 51# one per line, with a standard prefix prepended to each one. Diagnostic 52# output is sent to stderr unless otherwise redirected. 53 54# TRANSLATION_NOTE - The next series of messages makes the above output in C 55# locale. 56 57@ MSG_USE_R1_A "The runtime linker and link-editor support a \ 58 shared debugging" 59@ MSG_USE_R1_B "facility. Options are selected via a comma separated list \ 60 of tokens," 61@ MSG_USE_R1_C "each of which specifies a display option or a category \ 62 for which" 63@ MSG_USE_R1_D "information is desired. Many tokens apply to both linker \ 64 components," 65@ MSG_USE_R1_E "while some are specific to one or the other. Diagnostics \ 66 are printed," 67@ MSG_USE_R1_F "one per line, with a standard prefix prepended to each one. \ 68 Diagnostic" 69 70# TRANSLATION_NOTE -- do not translate "stderr" 71@ MSG_USE_R1_G "output is sent to stderr unless otherwise redirected." 72 73# TRANSLATION_NOTE - End of reference 1 74 75 76# TRANSLATION_NOTE - Use the following output in the C locale as reference 2. 77# 78# Runtime Linking (ld.so.1): 79# Diagnostics that trace the runtime linking of an application 80# can be enabled via the LD_DEBUG environment variable: 81# LD_DEBUG=token1,token2 app ... 82# In addition to the "output" token described below, diagnostic 83# output from the runtime linker can be redirected to an output 84# file using the additional environment variable: 85# LD_DEBUG_OUTPUT=file 86# If the "output" token and LD_DEBUG_OUTPUT are both specified, 87# the file specified by LD_DEBUG_OUTPUT is used. If LD_DEBUG_OUTPUT 88# is used, the output file name is suffixed with the process id. 89# An output file specified via the "output" token is used as 90# specified, without a process id suffix. Use of the "output" 91# token with programs that call fork() results in each process 92# writing debug output to the same file. The debug output will be 93# jumbled and incomplete. LD_DEBUG_OUTPUT should be used in such 94# cases to direct debug output for each process to a unique file. 95# 96# All runtime linker diagnostics are prepended with the process 97# id. If thread capabilities are enabled for the process, the 98# thread id is also shown. All Solaris applications are thread 99# capable, and a single threaded application may use threads via 100# the libraries it links to. Diagnostics from such applications 101# reference thread id 1. 102 103# TRANSLATION_NOTE - The next series of messages makes the above output in C 104# locale. 105 106@ MSG_USE_R2_A "Runtime Linking (ld.so.1):" 107@ MSG_USE_R2_B " Diagnostics that trace the runtime linking \ 108 of an application" 109 110# TRANSLATION_NOTE -- do not translate "LD_DEBUG" 111@ MSG_USE_R2_C " can be enabled via the LD_DEBUG environment variable:" 112 113# TRANSLATION_NOTE -- do not translate "LD_DEBUG" 114@ MSG_USE_R2_D " LD_DEBUG=token1,token2 app ..." 115 116# TRANSLATION_NOTE -- do not translate "output" 117@ MSG_USE_R2_E " In addition to the \"output\" token described \ 118 below, diagnostic" 119@ MSG_USE_R2_F " output from the runtime linker can be redirected to \ 120 an output" 121@ MSG_USE_R2_G " file using the additional environment variable:" 122 123# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT" 124@ MSG_USE_R2_H " LD_DEBUG_OUTPUT=file" 125 126# TRANSLATION_NOTE -- do not translate "output" or "LD_DEBUG_OUTPUT" 127@ MSG_USE_R2_I " If the \"output\" token and LD_DEBUG_OUTPUT are \ 128 both specified," 129 130# TRANSLATION_NOTE -- do not translate "LD_DEBUG_OUTPUT" 131@ MSG_USE_R2_J " the file specified by LD_DEBUG_OUTPUT is used. \ 132 If LD_DEBUG_OUTPUT" 133@ MSG_USE_R2_K " is used, the output file name is suffixed with \ 134 the process id." 135 136# TRANSLATION_NOTE -- do not translate "output" 137@ MSG_USE_R2_L " An output file specified via the \"output\" token \ 138 is used as" 139 140# TRANSLATION_NOTE -- do not translate "output" 141@ MSG_USE_R2_M " specified, without a process id suffix. Use \ 142 of the \"output\"" 143 144# TRANSLATION_NOTE -- do not translate "fork" 145@ MSG_USE_R2_N " token with programs that call fork() results in \ 146 each process" 147@ MSG_USE_R2_O " writing debug output to the same file. The debug \ 148 output will be" 149@ MSG_USE_R2_P " jumbled and incomplete. LD_DEBUG_OUTPUT should be \ 150 used in such" 151@ MSG_USE_R2_Q " cases to direct debug output for each process to \ 152 a unique file." 153 154 155@ MSG_USE_R2_R " All runtime linker diagnostics are prepended with \ 156 the process" 157@ MSG_USE_R2_S " id. If thread capabilities are enabled for the \ 158 process, the" 159@ MSG_USE_R2_T " thread id is also shown. All Solaris applications are \ 160 thread" 161@ MSG_USE_R2_U " capable, and a single threaded application may \ 162 use threads via" 163@ MSG_USE_R2_V " the libraries it links to. Diagnostics from such \ 164 applications" 165@ MSG_USE_R2_W " reference thread id 1." 166 167# TRANSLATION_NOTE - End of reference 2 168 169 170# TRANSLATION_NOTE - Use the following output in the C locale as reference 3. 171# 172# Link-Editing (ld): 173# Diagnostics that trace the link-editing of an application are 174# enabled using the -D option: 175# ld -Dtoken1,token2 -o prog ... 176# As compiler drivers may assign -D a different meaning, the 177# LD_OPTIONS environment variable is often used: 178# LD_OPTIONS=-Dtoken1,token2 cc -o prog ... 179# 180# The position of -D on the link-edit command line is significant. 181# Diagnostics are enabled when a debug token is first encountered, 182# and can be switched off by prepending the token with "!". 183# 184# Diagnostic output can be directed to a file using the "output" 185# token, The output file is used as specified, without a process 186# id suffix. 187# 188# All link-editor diagnostics are prepended with the string "debug". 189# 190 191# TRANSLATION_NOTE - The next series of messages makes the above output in C 192# locale. 193 194@ MSG_USE_R3_A " Link-Editing (ld):" 195@ MSG_USE_R3_B " Diagnostics that trace the link-editing of an \ 196 application are" 197@ MSG_USE_R3_C " enabled using the -D option:" 198@ MSG_USE_R3_D " ld -Dtoken1,token2 -o prog ..." 199@ MSG_USE_R3_E " As compiler drivers may assign -D a different meaning, the" 200 201# TRANSLATION_NOTE -- do not translate "LD_OPTIONS" 202@ MSG_USE_R3_F " LD_OPTIONS environment variable is often used:" 203 204# TRANSLATION_NOTE -- do not translate "LD_OPTIONS" 205@ MSG_USE_R3_G " LD_OPTIONS=-Dtoken1,token2 cc -o prog ..." 206 207@ MSG_USE_R3_H " The position of -D on the link-edit command line \ 208 is significant." 209@ MSG_USE_R3_I " Diagnostics are enabled when a debug token is \ 210 first encountered," 211@ MSG_USE_R3_J " and can be switched off by prepending the token \ 212 with \"!\"." 213 214# TRANSLATION_NOTE -- do not translate "output" 215@ MSG_USE_R3_K " Diagnostic output can be directed to a file using \ 216 the \"output\"" 217 218@ MSG_USE_R3_L " token, The output file is used as specified, \ 219 without a process" 220@ MSG_USE_R3_M " id suffix." 221 222 223# TRANSLATION_NOTE -- do not translate "debug" 224@ MSG_USE_R3_N " All link-editor diagnostics are prepended with the \ 225 string \"debug\"." 226 227# TRANSLATION_NOTE - End of reference 3 228 229 230# TRANSLATION_NOTE - Use the following output in the C locale as reference 4. 231# 232# demangle show C++ symbol names in their demangled form 233# detail provide more information in conjunction with 234# other options 235# dtime prepend a time delta to diagnostics. The value 236# appears as seconds.fraction, and represents 237# the elapsed time since that last diagnostic. 238# long display long object names without truncation 239# output=file debug output is sent to the named file 240# instead of stderr. If file is empty (\"\"), 241# following output will be sent to stderr. 242# ttime prepend a time stamp to diagnostics. The value 243# appears as seconds.fraction, and represents 244# the time since entering ld or ld.so.1. 245# Note, all diagnostics induce a probe affect, 246# which should be taken into account when 247# interpreting dtime and ttime information. 248# 249 250# TRANSLATION_NOTE - The next series of messages makes the above output in C 251# locale. 252 253# TRANSLATION_NOTE -- do not translate the first token "demangle". 254@ MSG_USE_R4_A " demangle show C++ symbol names in their \ 255 demangled form" 256 257# TRANSLATION_NOTE -- do not translate the first token "detail". 258@ MSG_USE_R4_B " detail provide more information in \ 259 conjunction with" 260@ MSG_USE_R4_B2 " other options" 261 262# TRANSLATION_NOTE -- do not translate the first token "dtime". 263@ MSG_USE_R4_C " dtime prepend a time delta to diagnostics. \ 264 The value" 265@ MSG_USE_R4_C2 " appears as seconds.fraction, and \ 266 represents" 267@ MSG_USE_R4_C3 " the elapsed time since that last \ 268 diagnostic." 269 270# TRANSLATION_NOTE -- do not translate the first token "long". 271@ MSG_USE_R4_D " long display long object names without \ 272 truncation" 273 274# TRANSLATION_NOTE -- do not translate the first token "output". 275@ MSG_USE_R4_E " output=file debug output is sent to the \ 276 named file" 277@ MSG_USE_R4_E2 " instead of stderr. If file is \ 278 empty (\"\")," 279@ MSG_USE_R4_E3 " following output will be \ 280 sent to stderr." 281 282# TRANSLATION_NOTE -- do not translate the first token "ttime". 283@ MSG_USE_R4_F " ttime prepend a time stamp to diagnostics. \ 284 The value" 285@ MSG_USE_R4_F2 " appears as seconds.fraction, and \ 286 represents" 287@ MSG_USE_R4_F3 " the time since entering ld or \ 288 ld.so.1." 289@ MSG_USE_R4_F4 " Note all diagnostics induce a \ 290 probe affect," 291@ MSG_USE_R4_F5 " which should be taken into \ 292 account when" 293@ MSG_USE_R4_F6 " interpreting dtime and ttime \ 294 information." 295 296# TRANSLATION_NOTE - End of reference 4 297 298 299# TRANSLATION_NOTE - Use the following output in the C locale as reference 5. 300# 301# lmid[=name] prepend link-map list id to diagnostics, and 302# optionally filter the lists: By default, 303# diagnostics are produced for all link-map 304# lists except that of the runtime linker 305# (ldso), without identification. "lmid" causes 306# the link-map list id to be prepended. 307# "name" limits diagnostics to the named 308# link-map list. Additional "lmid" tokens 309# can specify multiple link-map lists. 310# Valid names are: 311# all all link-map lists except ldso 312# alt all alternative link-map lists 313# alt[0-9]+ specific alternative link-map list 314# base the base, or main, link-map list 315# ldso the runtime linker link-map list 316# 317 318# TRANSLATION_NOTE - The next series of messages makes the above output in C 319# locale. 320 321 322# TRANSLATION_NOTE -- do not translate the first token "lmid". 323@ MSG_USE_R5_A " lmid[=name] prepend link-map list id to \ 324 diagnostics, and" 325@ MSG_USE_R5_A2 " optionally filter the lists: By \ 326 default," 327@ MSG_USE_R5_A3 " diagnostics are produced for all \ 328 link-map" 329@ MSG_USE_R5_A4 " lists except that of the runtime \ 330 linker" 331@ MSG_USE_R5_A5 " (ldso), without identification. \ 332 \"lmid\" causes" 333 334# TRANSLATION_NOTE -- do not translate "name" 335@ MSG_USE_R5_A6 " the link-map list id to be prepended." 336@ MSG_USE_R5_A7 " \"name\" limits diagnostics to the \ 337 named" 338@ MSG_USE_R5_A8 " link-map list. Additional \"lmid\" \ 339 tokens" 340@ MSG_USE_R5_A9 " can specify multiple link-map \ 341 lists." 342@ MSG_USE_R5_A0 " Valid names are:" 343 344# TRANSLATION_NOTE -- do not translate the token "all". 345@ MSG_USE_R5_B " all all link-map lists \ 346 except ldso" 347 348# TRANSLATION_NOTE -- do not translate the token "alt". 349@ MSG_USE_R5_C " alt all alternative \ 350 link-map lists" 351 352# TRANSLATION_NOTE -- do not translate the token "alt". 353@ MSG_USE_R5_D " alt[0-9]+ specific alt \ 354 link-map list" 355 356# TRANSLATION_NOTE -- do not translate the token "base". 357@ MSG_USE_R5_E " base base (main) \ 358 link-map list" 359@ MSG_USE_R5_F " ldso runtime linker \ 360 link-map list " 361# TRANSLATION_NOTE - End of reference 5 362 363 364# TRANSLATION_NOTE - Use the following output in the C locale as reference 6. 365# 366# name prepend output file basename to diagnostics 367# fullname prepend full output file name to diagnostics 368# class prepend output file elfclass (32/64) to 369# diagnostics 370# 371 372# TRANSLATION_NOTE - The next series of messages makes the above output in C 373# locale. 374 375# TRANSLATION_NOTE -- do not translate the first token "name". 376@ MSG_USE_R6_A " name prepend output file basename \ 377 to diagnostics" 378 379# TRANSLATION_NOTE -- do not translate the first token "fullname". 380@ MSG_USE_R6_B " fullname prepend full output file name \ 381 to diagnostics" 382 383# TRANSLATION_NOTE -- do not translate the first token "class". 384@ MSG_USE_R6_C " class prepend output file elfclass \ 385 (32/64) to" 386@ MSG_USE_R6_C2 " diagnostics" 387 388# TRANSLATION_NOTE - End of reference 6 389 390 391# TRANSLATION_NOTE - Use the following output in the C locale as reference 7. 392# 393# all display information for all categories 394# basic basic trace information/warnings 395# cap platform/machine/hardware/software capabilities 396# files input file processing (files and libraries) 397# help this help message 398# libs library search paths; detail flag shows 399# actual library lookup (-l) processing 400# move move sections 401# reloc relocations 402# symbols symbol tables; detail flag shows internal 403# symbol table addition and resolution (ld only) 404# tls thread local storage (TLS) 405# unused unused/unreferenced files; detail flag 406# shows unused sections (ld only) 407# versions ELF versioning 408 409# TRANSLATION_NOTE - The next series of messages makes the above output in C 410# locale. 411 412 413# TRANSLATION_NOTE -- do not translate the first token "all". 414@ MSG_USE_R7_A " all display information for \ 415 all categories" 416 417# TRANSLATION_NOTE -- do not translate the first token "basic". 418@ MSG_USE_R7_B " basic basic trace information/warnings" 419 420# TRANSLATION_NOTE -- do not translate the first token "cap". 421@ MSG_USE_R7_C " cap platform/machine/hardware/software \ 422 capabilities" 423 424# TRANSLATION_NOTE -- do not translate the first token "files". 425@ MSG_USE_R7_D " files input file processing (files \ 426 and libraries)" 427 428# TRANSLATION_NOTE -- do not translate the first token "help". 429@ MSG_USE_R7_E " help this help message" 430 431# TRANSLATION_NOTE -- do not translate the first token "libs". 432@ MSG_USE_R7_F " libs library search paths; detail \ 433 flag shows" 434@ MSG_USE_R7_F2 " actual library lookup (-l) \ 435 processing" 436 437# TRANSLATION_NOTE -- do not translate the first token "move". 438@ MSG_USE_R7_G " move move sections" 439 440# TRANSLATION_NOTE -- do not translate the first token "reloc". 441@ MSG_USE_R7_H " reloc relocations" 442 443# TRANSLATION_NOTE -- do not translate the first token "symbols". 444@ MSG_USE_R7_I " symbols symbol tables; detail flag shows \ 445 internal" 446@ MSG_USE_R7_I2 " symbol table addition/resolution \ 447 (ld only)" 448 449# TRANSLATION_NOTE -- do not translate the first token "tls". 450@ MSG_USE_R7_J " tls thread local storage (TLS)" 451 452# TRANSLATION_NOTE -- do not translate the first token "unused". 453@ MSG_USE_R7_K " unused unused/unreferenced files; \ 454 detail flag" 455@ MSG_USE_R7_K2 " shows unused sections (ld only)" 456 457# TRANSLATION_NOTE -- do not translate the first token "versions". 458@ MSG_USE_R7_L " versions ELF versioning" 459 460# TRANSLATION_NOTE - End of reference 7 461 462 463# TRANSLATION_NOTE - Use the following output in the C locale as reference 8. 464# 465# audit runtime link-audit processing 466# bindings symbol binding; detail flag shows 467# absolute:relative addresses 468# callback user supplied code executed by ld.so.1 469# (i.e. dl_iterate_phdr) 470# init init and fini processing 471 472 473# TRANSLATION_NOTE - The next series of messages makes the above output in C 474# locale. 475 476 477# TRANSLATION_NOTE -- do not translate the first token "audit". 478@ MSG_USE_R8_A " audit runtime link-audit processing" 479 480# TRANSLATION_NOTE -- do not translate the first token "bindings". 481@ MSG_USE_R8_B " bindings symbol binding; detail flag shows" 482@ MSG_USE_R8_B2 " absolute:relative addresses" 483 484# TRANSLATION_NOTE -- do not translate the first token "dl". 485@ MSG_USE_R8_C " dl user calls to the dl*() family" 486 487# TRANSLATION_NOTE -- do not translate the first token "init". 488@ MSG_USE_R8_D " init init and fini processing" 489 490# TRANSLATION_NOTE - End of reference 8 491 492 493# TRANSLATION_NOTE - Use the following output in the C locale as reference 9. 494# 495# args input arguments 496# entry entrance criteria descriptors 497# got GOT symbol information 498# map mapfile processing 499# sections input sections 500# segments output segments and address/offset processing; 501# detail flag shows associated sections 502# statistics symbol table and relocation statistics 503# strtab string table compression statistics; 504# detail flag shows layout of string tables 505# support support libraries 506 507# TRANSLATION_NOTE - The next series of messages makes the above output in C 508# locale. 509 510# TRANSLATION_NOTE -- do not translate the first token "args". 511@ MSG_USE_R9_A " args input arguments" 512 513# TRANSLATION_NOTE -- do not translate the first token "entry". 514@ MSG_USE_R9_B " entry entrance criteria descriptors" 515 516# TRANSLATION_NOTE -- do not translate the first token "got". 517@ MSG_USE_R9_C " got GOT symbol information" 518 519# TRANSLATION_NOTE -- do not translate the first token "map". 520@ MSG_USE_R9_D " map mapfile processing" 521 522# TRANSLATION_NOTE -- do not translate the first token "sections". 523@ MSG_USE_R9_E " sections input sections" 524 525# TRANSLATION_NOTE -- do not translate the first token "segments". 526@ MSG_USE_R9_F " segments output segments and address/offset \ 527 processing;" 528@ MSG_USE_R9_F2 " detail flag shows associated \ 529 sections" 530 531# TRANSLATION_NOTE -- do not translate the first token "statistics". 532@ MSG_USE_R9_G " statistics symbol table and relocation \ 533 statistics" 534 535# TRANSLATION_NOTE -- do not translate the first token "strtab". 536@ MSG_USE_R9_H " strtab string table compression statistics;" 537@ MSG_USE_R9_H2 " detail flag shows layout of \ 538 string tables" 539 540# TRANSLATION_NOTE -- do not translate the first token "support". 541@ MSG_USE_R9_I " support support libraries" 542 543# TRANSLATION_NOTE - End of reference 9 544 545 546# Basic processing (ld). 547 548@ MSG_BASIC_COLLECT "collect relocations" 549@ MSG_BASIC_CREATE "create output image" 550@ MSG_BASIC_FILES "process files" 551@ MSG_BASIC_FINISHED "processing finished" 552@ MSG_BASIC_OPTIONS "process options" 553@ MSG_BASIC_RELOCATE "relocate output image" 554@ MSG_BASIC_VALIDATE "validating symbols" 555 556# Argument messages 557 558@ MSG_ARG_OPTION "arg[%d]\toption=-%c" 559@ MSG_ARG_OPTARG "arg[%d]\toption=-%c: option-argument: %s" 560@ MSG_ARG_STR2CHR "arg[%d]\toption=-%s: translated: new option=-%c" 561@ MSG_ARG_WLDEL "arg[%d]\toption=-W%s: translated: prefix -Wl,: \ 562 removed" 563@ MSG_ARG_FILE "arg[%d]\tfile=%s" 564 565 566# Bindings messages 567# NOTE: these are used by appcert(1) and lari(1), use care when changing. 568 569@ MSG_BND_BASIC "binding file=%s to file=%s: symbol '%s'" 570@ MSG_BND_PLT "binding file=%s (%#llx:%#llx) at plt[%lld]:%s to \ 571 file=%s (%#llx:%#llx): symbol '%s'%s" 572@ MSG_BND_DLSYM "binding file=%s (dlsym) to file=%s \ 573 (%#llx:%#llx): symbol '%s'%s" 574@ MSG_BND_DEFAULT "binding file=%s (%#llx:%#llx) to file=%s \ 575 (%#llx:%#llx): symbol '%s'%s" 576@ MSG_BND_WEAK_1 "binding file=%s to 0x0 (undefined weak): symbol '%s'" 577@ MSG_BND_WEAK_2 "binding file=%s (%#llx:%#llx) to 0x0 \ 578 (undefined weak): symbol '%s'" 579 580# NOTE: the rejected message is used by lari(1), use care when changing. This 581# message is formatted to conform to the pattern used by the MSG_BINFO messages. 582@ MSG_BND_REJECT "binding file=%s to file=%s: symbol '%s' \ 583 (rejected: %s)" 584@ MSG_BNDREJ_DIRECT "attempt to directly bind to a NODIRECT definition" 585@ MSG_BNDREJ_GROUP "attempt to bind within a group to a NODIRECT \ 586 definition" 587@ MSG_BNDREJ_SINGLE "attempt to bind to a SINGLETON definition without \ 588 following default search model" 589 590@ MSG_BND_PLTPAD_TO " pltpad: %#llx: file=%s bound to file=%s: \ 591 symbol '%s'" 592@ MSG_BND_PLTPAD_FROM " pltpad: %#llx: bound from file=%s: symbol '%s'" 593 594@ MSG_BND_PSUM_SPARCV9 "Summary of PLT types bound: 21d=%d, 24d=%d, u32=%d, \ 595 u44=%d, full=%d, far=%d, Total=%d" 596@ MSG_BND_PSUM_SPARC "Summary of PLT types bound: 21d=%d, 24d=%d, \ 597 full=%d, Total=%d" 598@ MSG_BND_PSUM_DEFAULT "Summary of PLT types bound: total=%d" 599 600# Relocation messages 601 602@ MSG_REL_GENERATE "generating input relocations: section=%s" 603@ MSG_REL_COLLECT "collecting input relocations: section=%s, file=%s" 604@ MSG_REL_ACTIVE "performing active relocations" 605@ MSG_REL_CREATING "creating output relocations" 606@ MSG_REL_START "relocation processing: file=%s%s" 607@ MSG_REL_FINISH "relocation processing: file=%s; finished%s" 608@ MSG_REL_NONE "relocation processing: file=%s%s; nothing to do" 609 610@ MSG_REL_PLT " (plt processing only)" 611@ MSG_REL_FAIL " (failed)" 612 613@ MSG_REL_BADROFFSET "<offset lies outside memory image; \ 614 relocation discarded>" 615 616@ MSG_REL_TRANSITION "relocation: %s: section=%s; input from file=%s; \ 617 offset=0x%llx; symbol=%s; transitioned to: %s" 618@ MSG_REL_DISCARDED "relocation against discarded section=%s from file=%s; \ 619 relocation type=%s offset=0x%llx; relocation discarded" 620@ MSG_REL_COPY "copy data from file=%s to file=%s: symbol '%s'%s" 621@ MSG_REL_SLOPPYCOMDAT "the following relocation references a discarded \ 622 section; relocation redirected to section %s in \ 623 file %s" 624 625# Entrance criteria messages 626 627@ MSG_ECR_TITLE "Segment Entrance Criteria Descriptor List" 628@ MSG_ECR_DESC "entrance descriptor[%u]" 629 630 631# Elf Data (section) messages 632# TRANSLATION_NOTE - the following two entries provide for a series of one or 633# more standard 32-bit Elf_Data entries that align with the initial title. 634 635@ MSG_EDATA_TITLE_32 " addr type size offset al file" 636@ MSG_EDATA_ENTRY_32 " %3s %#10llx %-5s %#10llx %#8llx %2lld %s %s%s" 637 638# TRANSLATION_NOTE - the following two entries provide for a series of one or 639# more standard 64-bit Elf_Data entries that align with the initial title. 640 641@ MSG_EDATA_TITLE_64 " addr type \ 642 size offset al file" 643@ MSG_EDATA_ENTRY_64 " %3s %#18llx %-5s %#18llx %#16llx %2lld %s %s%s" 644 645@ MSG_EDATA_IGNSCN " (section ignored)" 646 647# File messages 648 649@ MSG_FIL_BASIC "file=%s [ %s ]" 650@ MSG_FIL_ARCHIVE "file=%s [ archive ] %s" 651@ MSG_FIL_SKIP_1 "file=%s; skipped: already processed as %s" 652@ MSG_FIL_SKIP_2 "file=%s; skipped: already processed" 653@ MSG_FIL_REUSE "file=%s; reusing: originally processed as %s" 654@ MSG_FIL_PROT "file=%s; modifying memory protections (%c PROT_WRITE)" 655@ MSG_FIL_DELETE "file=%s; deleting" 656@ MSG_FIL_CLEANUP "file=%s; loading failed: cleaning up lmco 0x%llx" 657@ MSG_FIL_LAZYLOAD "file=%s; lazy loading from file=%s: symbol=%s" 658@ MSG_FIL_PRELOAD "file=%s; preloading" 659@ MSG_FIL_NEEDED "file=%s; needed by %s" 660@ MSG_FIL_FILTER_1 "file=%s; filter for %s (configuration definition)" 661@ MSG_FIL_FILTER_2 "file=%s; filter for %s" 662@ MSG_FIL_FILTEE_2 "file=%s; filtee processing failed" 663@ MSG_FIL_FILTEE_3 "file=%s; filtee skipped (auditing directed)" 664@ MSG_FIL_FIXNAME "file=%s; required name=%s" 665@ MSG_FIL_PROMOTE "file=%s; promoting mode to %s" 666@ MSG_FIL_AOUT "file=%s [ AOUT ]; generating link map" 667@ MSG_FIL_ELF "file=%s [ ELF ]; generating link map%s" 668@ MSG_FIL_LDSO "file=%s [ ELF ]" 669 670# NOTE: these are used by lari(1), use care when changing. 671@ MSG_FIL_ANALYZE "file=%s; analyzing %s" 672@ MSG_FIL_FILTEE_1 "file=%s; filtered by %s" 673@ MSG_FIL_CONFIG "file=%s [ ELF ]; configuration alternate found: %s" 674 675 676@ MSG_FIL_DATA_AS " addr: %#18llx size: %#18llx" 677@ MSG_FIL_DATA_LL " lmid: %18.18s lmco: %#18llx" 678@ MSG_FIL_DATA_EA " envp: %#18llx auxv: %#18llx" 679 680@ MSG_FIL_MMAPOBJ "file=%s mmapobj entries=%d" 681@ MSG_FIL_MMAPOBJ_1 " [%d]: addr: %#18llx fsize: %#18llx %s" 682@ MSG_FIL_MMAPOBJ_2 " offset: %#17llx msize: %#18llx" 683 684@ MSG_FIL_BND_ADD "file=%s; add binding to:" 685@ MSG_FIL_BND_FILE " file=%s %s" 686 687@ MSG_FIL_DEP_TITLE "processing %s dependencies %s:" 688@ MSG_FIL_DEP_NONE " file=%s; has no dependencies" 689@ MSG_FIL_DEP_ENT " file=%s; depends on:" 690 691@ MSG_FIL_DEP_ADD " file=%s; object added %s %s" 692@ MSG_FIL_DEP_UPDATE " file=%s; object updated %s %s" 693@ MSG_FIL_DEP_DELETE " file=%s; object deleting %s" 694@ MSG_FIL_DEP_REMOVE " file=%s; object removed from handle %s" 695@ MSG_FIL_DEP_REMAIN " file=%s; object must remain on handle %s" 696@ MSG_FIL_DEP_ORPHAN " file=%s; object remains on orphan handle %s" 697@ MSG_FIL_DEP_REINST " file=%s; object reinstated %s" 698 699@ MSG_FIL_HDL_CREATE "handle=%s; creating %s 0x%llx:" 700@ MSG_FIL_HDL_ADD "handle=%s; adding dependent objects %s:" 701@ MSG_FIL_HDL_DELETE "handle=%s; inspecting for deletion:" 702@ MSG_FIL_HDL_ORPHAN "handle=%s; deletion cannot be completed: moving to \ 703 orphan list:" 704@ MSG_FIL_HDL_REINST "handle=%s; reinstating from orphan list:" 705 706@ MSG_FIL_HDL_COLLECT "handle=%s; collected for possible removal %s" 707@ MSG_FIL_HDL_RETAIN "handle=%s; externally referenced from %s: handle \ 708 retained" 709@ MSG_FIL_DEL_RESCAN "pending deletions; rescanning orphan list for \ 710 available deletions" 711 712@ MSG_FIL_AR_RESCAN "rescanning archives from args[%d-%d]; additional \ 713 members may satisfy prior extractions" 714 715@ MSG_FIL_CONFIG_ERR "configuration file=%s: %s" 716@ MSG_FIL_CONFIG_ERR_1 "ignored (configuration building)" 717@ MSG_FIL_CONFIG_ERR_2 "invalid version" 718@ MSG_FIL_CONFIG_ERR_3 "unable to process file" 719@ MSG_FIL_CONFIG_ERR_4 "corrupt or truncated file" 720@ MSG_FIL_CONFIG_ERR_5 "incompatible ELF class, byte order, or machine \ 721 architecture" 722 723@ MSG_FIL_MODIFIED "file=%s; open modified by support library: %s" 724@ MSG_FIL_NAMECHANGE " name changed to: %s" 725@ MSG_FIL_FDCHANGE " file descriptor changed from: %d to: %d %s" 726@ MSG_FIL_ELFCHANGE " ELF descriptor changed from: 0x%llx to: 0x%llx %s" 727@ MSG_FIL_IGNORE " (file will be ignored)" 728 729@ MSG_CNTL_TITLE "control list processing complete: moving lmco 0x%llx \ 730 to lmco 0x%llx" 731 732@ MSG_REJ_MACH "file=%s; rejected: wrong machine type: %s" 733@ MSG_REJ_CLASS "file=%s; rejected: wrong ELF class: %s" 734@ MSG_REJ_DATA "file=%s; rejected: wrong ELF data format: %s" 735@ MSG_REJ_TYPE "file=%s; rejected: bad ELF type: %s" 736@ MSG_REJ_BADFLAG "file=%s; rejected: bad ELF flags value: %s" 737@ MSG_REJ_MISFLAG "file=%s; rejected: mismatched ELF flags value: %s" 738@ MSG_REJ_VERSION "file=%s; rejected: mismatched ELF/lib version: %s" 739@ MSG_REJ_HAL "file=%s; rejected: HAL R1 extensions required" 740@ MSG_REJ_US3 "file=%s; rejected: Sun UltraSPARC III extensions \ 741 required" 742@ MSG_REJ_STR "obj=%s; rejected: %s" 743@ MSG_REJ_UNKFILE "obj=%s; rejected: unknown file type" 744@ MSG_REJ_UNKCAP "obj=%s; rejected: unknown capability: %d" 745@ MSG_REJ_HWCAP_1 "obj=%s; rejected: hardware capability (CA_SUNW_HW_1) \ 746 unsupported: %s" 747@ MSG_REJ_SFCAP_1 "obj=%s; rejected: software capability (CA_SUNW_SF_1) \ 748 unsupported: %s" 749@ MSG_REJ_MACHCAP "obj=%s; rejected: machine capability (CA_SUNW_MACH) \ 750 unsupported: %s" 751@ MSG_REJ_PLATCAP "obj=%s; rejected: platform capability (CA_SUNW_PLAT) \ 752 unsupported: %s" 753@ MSG_REJ_HWCAP_2 "obj=%s; rejected: hardware capability (CA_SUNW_HW_2) \ 754 unsupported: %s" 755 756# Libs messages 757 758@ MSG_LIB_INITPATH "Library Search Paths (initial)" 759@ MSG_LIB_UPPATH "Library Search Paths (-L updated)" 760@ MSG_LIB_LOPT "find lib=-l%s; path=%s" 761@ MSG_LIB_REQUIRED "find lib=%s; path=%s (required by %s)" 762@ MSG_LIB_LDLIBPATH " search path=%s (LD_LIBRARY_PATH)" 763@ MSG_LIB_LDLIBPATHC " search path=%s (configuration LD_LIBRARY_PATH - %s)" 764@ MSG_LIB_RUNPATH " search path=%s (RUNPATH/RPATH from file %s)" 765@ MSG_LIB_DEFAULT " search path=%s (default)" 766@ MSG_LIB_DEFAULTC " search path=%s (configuration default - %s)" 767@ MSG_LIB_TDEFAULT " search path=%s (trusted default)" 768@ MSG_LIB_TDEFAULTC " search path=%s (trusted configuration default - %s)" 769@ MSG_LIB_LIBPATH " search path=%s (LIBPATH or -YP)" 770@ MSG_LIB_YPATH " search path=%s replaces path=%s (-Y%c)" 771 772@ MSG_LIB_FIND "find object=%s; searching" 773@ MSG_LIB_TRYING " trying path=%s%s" 774@ MSG_LIB_ALTER " trying path=%s (auditing supplied alternative)" 775@ MSG_LIB_SKIP " skip path=%s (auditing directed)" 776@ MSG_LIB_IGNORE " ignore path=%s (insecure directory name)" 777@ MSG_LIB_INUSE " use path=%s (implicitly secure, as directory \ 778 has already provided dependencies)" 779 780# Mapfile messages 781 782@ MSG_MAP_MAPFILE "mapfile=%s; version=%d (%s)" 783@ MSG_MAP_SEG "segment directive; line=%llu; %s" 784@ MSG_MAP_SEG_ORDER "segment order directive; line=%llu; list_cnt=%lld; %s" 785@ MSG_MAP_CAP "capability directive; line=%llu" 786@ MSG_MAP_EC "entrance criteria; line=%llu; added" 787@ MSG_MAP_OS_ORDER "output section ordering; line=%llu; segment=%s \ 788 section=%s; index=%d" 789@ MSG_MAP_HDR_NOALLOC "header noalloc directive; line=%llu; first loadable \ 790 segment will not contain ELF and program headers" 791 792@ MSG_MAP_SYM_SCOPE "symbol scope definition" 793@ MSG_MAP_SYM_SIZE "size-symbol directive; line=%llu; segment=%s; \ 794 symbol=%s; %s" 795@ MSG_MAP_SYM_VER_1 "%s, %s; symbol=%s (%s)" 796@ MSG_MAP_SYM_VER_2 "%s; symbol=%s (%s)" 797 798@ MSG_MAP_DV "depend versions directive; line=%llu, object=%s" 799@ MSG_MAP_DV_ENTRY "%12.12s %s; line=%llu" 800 801@ MSG_MAP_SORT_TITLE "mapfile additions: segment sorting required" 802@ MSG_MAP_SORT_TITLE_O "before:" 803@ MSG_MAP_SORT_TITLE_S "after:" 804@ MSG_MAP_POST_TITLE "mapfile post processing" 805@ MSG_MAP_ENT_ORD_TITLE "set entrance criteria input section sort keys; \ 806 segment=%s" 807 808@ MSG_MAP_ID_ADD "%s: %lld: enter conditional expression id: %s" 809@ MSG_MAP_ID_CLEAR "%s: %lld: delete conditional expression id: %s" 810@ MSG_MAP_PASS "%s: %lld: input enabled by %s" 811@ MSG_MAP_NOPASS "%s: %lld: input disabled by %s" 812 813# Move messages 814 815@ MSG_MOVE_FILE "file=%s processing move data" 816 817@ MSG_MOVE_TITLE1 " i/o offset size repeat stride \ 818 value with respect to" 819@ MSG_MOVE_TITLE2 " i/o address size repeat stride \ 820 value with respect to" 821 822@ MSG_MOVE_ENTRYIN " in %#10llx %6d %6d %6d %#16llx %s" 823@ MSG_MOVE_ENTRYOUT " out %#10llx %6d %6d %6d %#16llx %s" 824@ MSG_MOVE_EXPAND " %#10llx %#16llx (expanded)" 825 826@ MSG_MOVE_ADJEXPAND "for symbol=%s roffset: new=0x%llx" 827@ MSG_MOVE_ADJMOVE "for symbol=%s roffset: from=0x%llx, to=0x%llx" 828@ MSG_MOVE_OUTSCTADJ "adjusting addend for symbol=%s" 829@ MSG_MOVE_PAREXPN "expanding symbol=%s into .data: %s" 830@ MSG_MOVE_OUTMOVE "copying move entries for symbol=%s into .SUNW_move" 831@ MSG_MOVE_INPUT "collecting move entries: file=%s" 832@ MSG_MOVE_BAD "move %lld offset invalid: %s: offset=0x%llx \ 833 lies outside memory image; move discarded" 834 835# Section header messages 836 837@ MSG_SHD_MODIFIED "section=%s; section header modified by support \ 838 library: %s" 839@ MSG_SHD_ORIG " original:" 840@ MSG_SHD_NEW " new:" 841 842# TRANSLATION_NOTE - The following two items are used following a number in 843# the MSG_SHD_OFFSET_ENT_XX format strings below. For example "1 entry" 844# or "23 entries". 845# 846@ MSG_SHD_ENTRY_1 "entry" 847@ MSG_SHD_ENTRY_N "entries" 848 849 850# Section messages 851 852@ MSG_SEC_BACKING "mapfile symbol definitions: create backing storage:" 853 854@ MSG_SEC_INPUT "section=%s; input from file=%s" 855@ MSG_SEC_INPUT_GEN "section=%s" 856@ MSG_SEC_INPUT_GENSTR "section=%s; input generated merged string section" 857@ MSG_SEC_ADDED "section=%s; added to segment=%s" 858@ MSG_SEC_CREATED "section=%s; added to segment=%s (created)" 859@ MSG_SEC_REDIRECTED "section=%s; redirected to section=%s" 860@ MSG_SEC_DISCARDED "section=%s; input from file=%s; \ 861 discarded in favor of section=%s; file=%s" 862 863@ MSG_SEC_GNU_COMDAT_1 "section=%s; identified as COMDAT with \ 864 relaxed relocations enabled" 865@ MSG_SEC_GNU_COMDAT_2 "section=%s; identified as COMDAT" 866@ MSG_SEC_GNU_COMDAT_3 "section=%s; relaxed relocations enabled" 867 868@ MSG_SEC_GRP_DEFINE "section=%s; input from file=%s; defines %s\ 869 group: signature symbol: %s" 870@ MSG_SEC_GRP_MEMBER "section=%s; input from file=%s; member of %s\ 871 group: signature symbol: %s" 872@ MSG_SEC_GRP_DISCARDED "section=%s; input from file=%s; discarded in \ 873 favor of group: signature symbol: %s: file=%s" 874 875@ MSG_SEC_STRMERGE_DISCARDED "section=%s; input from file=%s; \ 876 discarded in favor of generated merged string section" 877@ MSG_SEC_STRMERGE_UNSUP "section=%s; input from file=%s; sh_addralign=%lld; \ 878 sh_entsize=%lld; unable to merge sections with this \ 879 size and alignment" 880 881@ MSG_SEC_STRTAB_STND "strtab=%s; full size: %lld; uncompressed" 882@ MSG_SEC_STRTAB_COMP "strtab=%s; full size: %lld; compressed down to: %lld" 883@ MSG_SEC_GENSTR_COMP "section=%s (generated merged string section); \ 884 full size: %lld; compressed down to: %lld" 885@ MSG_SEC_STRTAB_HD "strtab=%s; compression information [%d buckets]:" 886@ MSG_SEC_STRTAB_BCKT " bucket[%d]:" 887@ MSG_SEC_STRTAB_MSTR " [%lld] %s <master>" 888@ MSG_SEC_STRTAB_SUFSTR " [%lld] %s <suffix of: %s>" 889 890# Unused messages 891 892@ MSG_USD_SEC "section=%s; size=0x%llx; input from file=%s; \ 893 unused: does not satisfy any references%s" 894@ MSG_USD_SECDISCARD "; discarded" 895@ MSG_USD_FILE "file=%s unused: does not satisfy any references" 896@ MSG_USD_NEEDSTR "file=%s unused: unable to determine use" 897@ MSG_USD_UNREF "file=%s unreferenced: unused dependency of %s" 898@ MSG_USD_FILECYCLIC "file=%s unused: cyclic group [%d] member: \ 899 unreferenced outside of group" 900@ MSG_USD_LCINTERFACE "file=%s unused interface [%s]: using interface \ 901 from previously loaded object: file=%s" 902 903@ MSG_USD_LDLIBPATH " search path=%s unused: LD_LIBRARY_PATH entry" 904@ MSG_DUP_LDLIBPATH " search path=%s unused: (duplicate) LD_LIBRARY_PATH \ 905 entry" 906@ MSG_USD_LDLIBPATHC " search path=%s unused: configuration \ 907 LD_LIBRARY_PATH entry - %s" 908@ MSG_DUP_LDLIBPATHC " search path=%s unused: (duplicate) configuration \ 909 LD_LIBRARY_PATH entry - %s" 910@ MSG_USD_RUNPATH " search path=%s unused: RUNPATH/RPATH from file %s" 911 912# Segment messages 913 914@ MSG_SEG_DESC_INUSE "Program Header / Segment Descriptor List (in use)" 915@ MSG_SEG_DESC_AVAIL "Program Header / Segment Descriptor List (available)" 916 917 918# Support messages 919 920@ MSG_SUP_REQ "support object request=%s (%s)" 921@ MSG_SUP_REQ_ENV "supplied via SGS_SUPPORT" 922@ MSG_SUP_REQ_CMD "supplied via -S" 923 924@ MSG_SUP_ROUTINE " support object=%s: provides routine %s" 925 926@ MSG_SUP_CALLING_1 " calling routine=%s (%s)" 927@ MSG_SUP_CALLING_2 " calling routine=%s (%s) %s=%s" 928@ MSG_SUP_VNONE " unloading object=%s: version=LD_SUP_VNONE" 929@ MSG_SUP_OUTFILE "output file" 930@ MSG_SUP_INFILE "input file" 931@ MSG_SUP_INSEC "input section" 932@ MSG_SUP_SEC "section" 933 934# Symbol strings 935@ MSG_SYM_AR_FILE "symbol table processing; input file=%s [ archive ] %s" 936@ MSG_SYM_AR_ENTRY "archive[%lld]=%s" 937@ MSG_SYM_AR_CHECK "archive[%lld]=%s (%s) checking for tentative or \ 938 restricted visibility override" 939@ MSG_SYM_AR_RESOLVE "archive[%lld]=%s (%s) resolves undefined or tentative \ 940 symbol" 941@ MSG_SYM_AR_FORCEDEXRT "archive[%lld]=%s (%s) forced extraction" 942 943@ MSG_SYM_SPECIAL "symbol table processing; building special symbols" 944@ MSG_SYM_PROCESS "symbol table processing; input file=%s [ %s ]" 945@ MSG_SYM_FINAL "symbol table processing; final update" 946@ MSG_SYM_INDEX "symbol table processing; determining section \ 947 symbol's index" 948@ MSG_SYM_BSS "symbol table processing; assigning to bss \ 949 (possible copy relocations)" 950@ MSG_SYM_REDUCED "symbol table processing; reducing global symbols" 951@ MSG_SYM_RETAINING "symbol table processing; retaining local symbols" 952@ MSG_SYM_VERSION "symbol table processing; adding version symbols" 953@ MSG_SYM_CAPABILITIES "symbol table processing; adding local capabilities \ 954 symbols" 955 956@ MSG_SYM_BASIC "symbol[%d]=%s" 957@ MSG_SYM_ADDING "symbol[%d]=%s (global); adding" 958@ MSG_SYM_SECTION "symbol[%d]=%s (section); segment=%s" 959@ MSG_SYM_RESOLVING "symbol[%d]=%s (global); resolving [%d][%d]" 960@ MSG_SYM_UPDATE "symbol=%s; updated" 961@ MSG_SYM_CREATE "symbol=%s; creating" 962@ MSG_SYM_REDUCING "symbol=%s; reducing to local" 963@ MSG_SYM_ELIMINATING "symbol=%s; eliminating" 964@ MSG_SYM_NOTELIMINATE "symbol=%s; not eliminated: referenced by \ 965 section=%s, entry[%d]" 966@ MSG_SYM_DISCARD_SEC "symbol=%s; discarded: originates from unused or \ 967 discarded section=%s from file=%s" 968@ MSG_SYM_DISCARD_FILE "symbol=%s; discarded: originates from unused or \ 969 discarded file=%s" 970@ MSG_SYM_DISCARD_DUP "symbol[%d]=%s; discarded duplicate: originates from \ 971 file=%s" 972@ MSG_SYM_WRAP "symbol[%d]=%s renamed to %s (-z wrap)" 973@ MSG_SYM_CAP_ORIG "symbol[%d]=%s converting to symbol capability \ 974 (-z symbolcap)" 975@ MSG_SYM_CAP_LOCAL "symbol[%d]=%s creating local capability \ 976 (-z symbolcap)" 977 978@ MSG_SYM_AOUT "symbol=%s; (original AOUT name)" 979@ MSG_SYM_LOOKUP "symbol=%s; lookup in file=%s [ %s ]" 980 981@ MSG_DLSYM_1 "symbol=%s; dlsym() called from file=%s %s %s" 982@ MSG_DLSYM_2 "symbol=%s; dlsym() called from file=%s; starting \ 983 at file=%s %s %s" 984 985@ MSG_CAP_SYM_DEFAULT " symbol=%s[%u]: capability family default" 986@ MSG_CAP_SYM_USED " symbol=%s[%u]: used" 987@ MSG_CAP_SYM_CANDIDATE " symbol=%s[%u]: capability candidate" 988@ MSG_CAP_SYM_REJECTED " symbol=%s[%u]: capability rejected" 989@ MSG_CAP_SYM_HW_1 " symbol=%s[%u]: capability specific \ 990 (CA_SUNW_HW_1): [ %s ]" 991@ MSG_CAP_SYM_SF_1 " symbol=%s[%u]: capability specific \ 992 (CA_SUNW_SF_1): [ %s ]" 993@ MSG_CAP_SYM_MACH " symbol=%s[%u]: capability specific \ 994 (CA_SUNW_MACH): [ %s ]" 995@ MSG_CAP_SYM_PLAT " symbol=%s[%u]: capability specific \ 996 (CA_SUNW_PLAT): [ %s ]" 997@ MSG_CAP_SYM_HW_2 " symbol=%s[%u]: capability specific \ 998 (CA_SUNW_HW_2): [ %s ]" 999 1000@ MSG_SYM_LAZY_RESCAN "rescanning for lazy dependencies for symbol: %s" 1001 1002@ MSG_SYM_DUPSORTADDR "section %s: symbol '%s' and symbol '%s' have the \ 1003 same address: %#llx" 1004 1005@ MSG_SYM_IGNGNUVER "symbol=%s; hash index=%d; version=%d; skipping \ 1006 symbol with GNU version hidden bit set in file=%s" 1007 1008# Syminfo string 1009 1010@ MSG_SYMINFO_INFO "syminfo information" 1011 1012 1013# Version strings 1014 1015@ MSG_VER_AVAIL_1 "version availability: file=%s" 1016@ MSG_VER_AVAIL_2 " available version selected from" 1017@ MSG_VER_DEF_TITLE "version definition processing: file=%s" 1018@ MSG_VER_NEED_TITLE "version needed processing: file=%s" 1019@ MSG_VER_NOINTERFACE "version definition has no interface symbols: %s" 1020 1021# SHF_ORDERED related messages. Token used is sections. 1022 1023@ MSG_ORD_SORT_BEFORE "section=%s; requires output section reordering:" 1024@ MSG_ORD_SORT_AFTER "section=%s; output section reordered:" 1025@ MSG_ORD_HDR_1 " number of SHN_BEGIN=%u, ordered=%u, default=%u, \ 1026 SHN_AFTER=%u" 1027@ MSG_ORD_TITLE_1 " %s=SHN_BEGIN: section=%s from %s" 1028@ MSG_ORD_TITLE_2 " %s=SHN_AFTER: section=%s from %s" 1029@ MSG_ORD_TITLE_3 " sort key=%u: section=%s from %s, %s=%s" 1030 1031@ MSG_ORD_ERR_TITLE "the SHF_ORDERED section %s from %s has \ 1032 an error; flag ignored" 1033 1034@ MSG_ORD_ERR_INFORANGE " the sh_info field is out of range" 1035@ MSG_ORD_ERR_ORDER " the section pointed by sh_info is an ordered section" 1036@ MSG_ORD_ERR_LINKRANGE " the sh_link field is out of range" 1037@ MSG_ORD_ERR_FLAGS " the sh_flag is incorrect" 1038@ MSG_ORD_ERR_CYCLIC " the sh_link is cyclic" 1039@ MSG_ORD_ERR_LINKINV " a section pointed to by sh_link has an error" 1040 1041# Link-Auditing Messages 1042 1043@ MSG_AUD_INIT "audit library %s: processing" 1044@ MSG_AUD_VERSION "audit library %s: running at version: %d" 1045@ MSG_AUD_INTERFACE "audit library %s: provides interface: %s" 1046@ MSG_AUD_OBJECT "audit library %s: offered object: %s" 1047@ MSG_AUD_SYM "audit library %s: %s: symbol: %s: value: 0x%llx %s" 1048@ MSG_AUD_SYMNEW "modified to: 0x%llx" 1049 1050@ MSG_AUD_IGNORE "file=%s; global auditing request ignored: object \ 1051 did not initiate process" 1052@ MSG_AUD_SKIP "file=%s; skipped: using auditor from %s" 1053@ MSG_AUD_TERM "file=%s; auditing terminated search" 1054 1055# GOT Messages 1056 1057@ MSG_GOT_INFO "Global Offset Table information: (%u entries)" 1058 1059# TRANSLATION_NOTE 1060# Do not translate .init or .fini, they represent reserved section names. 1061 1062@ MSG_UTL_INIT "calling .init (%s): %s" 1063@ MSG_UTL_FINI "calling .fini: %s" 1064@ MSG_UTL_ARRAY "calling %s[%d]:0x%llx: %s" 1065@ MSG_UTL_TRANS "transferring control: %s" 1066@ MSG_UTL_INTOOLATE "loading after relocation has started: interposition \ 1067 request (DF_1_INTERPOSE) ignored: %s" 1068 1069@ MSG_UTL_EDGE_TITLE_I "traversing %s dependency edge for interposer:" 1070@ MSG_UTL_EDGE_TITLE_S "traversing %s dependency edge:" 1071@ MSG_UTL_EDGE_START " node (%d): file=%s" 1072@ MSG_UTL_EDGE_IN " node (%d): file=%s: referenced by %s %s" 1073@ MSG_UTL_EDGE_OUT " node (%d): file=%s; cyclic dependency on %s" 1074@ MSG_UTL_COLLECT " [%d] %s; collecting %s section" 1075 1076@ MSG_UTL_SORT "from sorted order" 1077@ MSG_UTL_PEND "pending" 1078@ MSG_UTL_DYN "dynamically triggered" 1079@ MSG_UTL_DONE "done" 1080 1081@ MSG_UTL_NOINIT "warning: calling %s whose init has not completed" 1082 1083@ MSG_UTL_DBNOTIFY "notify debugger: event: %s state: %s" 1084 1085@ MSG_UTL_SCC_TITLE " cycle detected - sorting cyclic dependencies in %s" 1086@ MSG_UTL_SCC_SUBI "reverse load-order" 1087@ MSG_UTL_SCC_SUBF "load-order" 1088 1089@ MSG_UTL_LCINTERFACE "file=%s; provides interface [%s]: 0x%llx" 1090 1091# Generic strings 1092 1093@ MSG_STR_IGNORE "ignored" 1094@ MSG_STR_ENTERED "entered" 1095@ MSG_STR_ORIGINAL "original" 1096@ MSG_STR_EXCLUDE "exclude" 1097@ MSG_STR_RESET "reset" 1098@ MSG_STR_IN " in" 1099@ MSG_STR_OUT "out" 1100@ MSG_STR_ACT "act" 1101@ MSG_STR_CURRENT "current" 1102@ MSG_STR_ADD "add" 1103@ MSG_STR_OLD "old" 1104@ MSG_STR_NEW "new" 1105@ MSG_STR_NEW_IMPLICIT "new (implicit)" 1106@ MSG_STR_RESOLVED "resolved" 1107@ MSG_STR_ADDING "adding" 1108@ MSG_STR_UP_1 "updating" 1109@ MSG_STR_UP_2 "updated" 1110@ MSG_STR_ALLOW "allow" 1111@ MSG_STR_REQUIRE "require" 1112@ MSG_STR_MOD_BEFORE "modify (before)" 1113@ MSG_STR_MOD_AFTER "modify (after)" 1114 1115@ MSG_STR_UNKNOWN "<unknown>" 1116@ MSG_STR_ORPHAN "<orphan>" 1117 1118@ MSG_STR_UNUSED "(unused)" 1119@ MSG_STR_AGAIN "(again)" 1120@ MSG_STR_NULL "(null)" 1121@ MSG_STR_ALTER " (alternate)" 1122@ MSG_STR_COPYZERO " (copy zero's unnecessary)" 1123@ MSG_STR_TEMPORARY " (temporary)" 1124@ MSG_STR_RETRY " (retry) " 1125 1126# TLS related messages 1127 1128@ MSG_TLS_STATBLOCK1 "static TLS module: [%ld] %s" 1129@ MSG_TLS_STATBLOCK2 "static TLS reservation: in use %#llx: \ 1130 additional backup: %#llx" 1131@ MSG_TLS_STATBLOCK3 "static TLS requirement: [%ld] %s: size %#llx: \ 1132 satisfied from backup reservation: remaining %#llx" 1133@ MSG_TLS_MODENT1 " block: %#18llx soff: %#10llx flags: %#llx \ 1134 %s" 1135@ MSG_TLS_MODENT2 " filesz: %#18llx memsz: %#10llx modid: %lld" 1136@ MSG_TLS_MODACT "%s TLS module: %s" 1137@ MSG_TLS_ADD "add" 1138@ MSG_TLS_REMOVE "remove" 1139 1140# Statistics related messages 1141 1142@ MSG_STATS_AR "archive %s: count=%d, used=%d (%d%%)" 1143 1144@ MSG_STATS_GENERAL "General Statistics:" 1145@ MSG_STATS_FILES " Input files: relocatables=%lld \ 1146 shared objects=%lld archives=%lld" 1147@ MSG_STATS_SYMBOLS_OUT " Symbols output: globals=%-10lld locals=%lld" 1148@ MSG_STATS_SYMBOLS_IN " Symbols input: globals=%-10lld scoped=%-10lld \ 1149 eliminated=%lld" 1150@ MSG_STATS_REL_OUT " Relocations output: records=%lld" 1151@ MSG_STATS_REL_IN " Relocations input: records=%-10lld applied=%lld" 1152@ MSG_STATS_REL_TICACHE " Relocation Cache" 1153@ MSG_STATS_REL_TIACT "Active" 1154@ MSG_STATS_REL_TIOUT "Output" 1155@ MSG_STATS_REL_CACHE " %s: buffers=%d, used=%lld/%lld (%d%%), \ 1156 size=%lld%s" 1157@ MSG_STATS_REL_ACACHE " Aux: buffers=%d, used=%lld/%lld (%d%%), \ 1158 size=%lld%s" 1159 1160# Capabilities messages 1161 1162@ MSG_CAP_SYS_HW_1 "hardware capabilities (CA_SUNW_HW_1) - %s" 1163@ MSG_CAP_SYS_SF_1 "software capabilities (CA_SUNW_SF_1) - %s" 1164@ MSG_CAP_SYS_MACH "machine capability (CA_SUNW_MACH) - %s" 1165@ MSG_CAP_SYS_PLAT "platform capability (CA_SUNW_PLAT) - %s" 1166@ MSG_CAP_SYS_HW_2 "hardware capabilities (CA_SUNW_HW_2) - %s" 1167 1168@ MSG_CAP_ALT_HW_1 "alternative hardware capabilities (CA_SUNW_HW_1) - %s" 1169@ MSG_CAP_ALT_SF_1 "alternative software capabilities (CA_SUNW_SF_1) - %s" 1170@ MSG_CAP_ALT_MACH "alternative machine capability (CA_SUNW_MACH) - %s" 1171@ MSG_CAP_ALT_PLAT "alternative platform capability (CA_SUNW_PLAT) - %s" 1172@ MSG_CAP_ALT_HW_2 "alternative hardware capabilities (CA_SUNW_HW_2) - %s" 1173 1174@ MSG_CAP_SEC_TITLE "capabilities; input file=%s" 1175@ MSG_CAP_SEC_ENTRY "%12.12s %-15.15s %s" 1176 1177@ MSG_CAP_CANDIDATE "obj=%s; capabilities candidate" 1178@ MSG_CAP_POST_TITLE "capabilities post processing" 1179 1180@ MSG_CAP_FILTER_1 "dir=%s; capability directory filtered by %s" 1181@ MSG_CAP_FILTER_2 "dir=%s; no capability objects found" 1182 1183@ MSG_ELF_HEADER "ELF Header" 1184 1185# Capabilities entries. 1186# TRANSLATION_NOTE - the following two entries provide for a series of one or 1187# more capabilities table entries that align with the initial title. 1188 1189@ MSG_CAP_ELF_TITLE " index tag value" 1190@ MSG_CAP_ELF_ENTRY "%10.10s %-15.15s %s" 1191 1192# Dynamic entries. 1193# TRANSLATION_NOTE - the following two entries provide for a series of one or 1194# more dynamic table entries that align with the initial title. 1195 1196@ MSG_DYN_TITLE " index tag value" 1197@ MSG_DYN_ENTRY "%10.10s %-16.16s %-#16llx %s" 1198 1199# Symbol table entries. 1200# TRANSLATION_NOTE - the following entries provide for a series of one or more 1201# standard 32-bit symbol table entries that align with the initial title. 1202 1203@ MSG_SYM_EFS_TITLE_32 " index value size type bind \ 1204 oth ver shndx name" 1205@ MSG_SYM_LDS_TITLE_32 " value size type bind \ 1206 oth ver shndx" 1207@ MSG_SYM_EFS_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \ 1208 %-14.14s %s" 1209 1210# TRANSLATION_NOTE - the following entries provide for a series of one or more 1211# long 32-bit symbol table entries that align with the initial title. 1212 1213@ MSG_SYM_EFL_TITLE_32 " index value size type bind \ 1214 oth ver shndx / name" 1215@ MSG_SYM_LDL_TITLE_32 " value size type bind \ 1216 oth ver shndx" 1217@ MSG_SYM_EFL_ENTRY_32 "%10.10s %10.10s 0x%8.8x %4s %4s %2s %4s \ 1218 %-14s %s" 1219 1220# TRANSLATION_NOTE - the following entries provide for a series of one or more 1221# standard 64-bit symbol table entries that align with the initial title. 1222 1223@ MSG_SYM_EFS_TITLE_64 " index value size \ 1224 type bind oth ver shndx name" 1225@ MSG_SYM_LDS_TITLE_64 " value size \ 1226 type bind oth ver shndx" 1227@ MSG_SYM_EFS_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \ 1228 %-14.14s %s" 1229 1230# TRANSLATION_NOTE - the following entries provide for a series of one or more 1231# long 64-bit symbol table entries that align with the initial title. 1232 1233@ MSG_SYM_EFL_TITLE_64 " index value size \ 1234 type bind oth ver shndx / name" 1235@ MSG_SYM_LDL_TITLE_64 " value size \ 1236 type bind oth ver shndx" 1237@ MSG_SYM_EFL_ENTRY_64 "%10.10s %18.18s 0x%16.16llx %4s %4s %2s %4s \ 1238 %-14s %s" 1239 1240 1241# Syminfo entries. 1242# TRANSLATION_NOTE - the following two entries provide for a series of one or 1243# more symbol information table entries that align with the initial title. 1244 1245@ MSG_SYMINFO_TITLE " index flags \ 1246 bound to symbol" 1247@ MSG_SYMINFO_ENTRY "%10.10s %-8s %7s %-24s %s" 1248 1249@ MSG_SYMINFO_CAP "<symbol capabilities>" 1250@ MSG_SYMINFO_SELF "<self>" 1251@ MSG_SYMINFO_PARENT "<parent>" 1252@ MSG_SYMINFO_EXTERN "<extern>" 1253 1254 1255# Global offset table entries. 1256# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and 1257# provide for a series of one or more 32-bit got table entries that align with 1258# the initial title. 1259 1260@ MSG_GOT_TITLE_32 " index addr value \ 1261 pending relocation" 1262@ MSG_GOT_ENTRY_RE_32 "%10.10s 0x%08llx 0x%08llx %-24s %s" 1263@ MSG_GOT_ENTRY_NR_32 "%10.10s 0x%08llx 0x%08llx" 1264 1265# TRANSLATION_NOTE - the following two entries are used by elfdump(1), and 1266# provide for a series of one or more 64-bit got table entries that align with 1267# the initial title. 1268 1269@ MSG_GOT_TITLE_64 " index addr \ 1270 value pending relocation" 1271@ MSG_GOT_ENTRY_RE_64 "%10.10s 0x%016llx 0x%016llx %-24s %s" 1272@ MSG_GOT_ENTRY_NR_64 "%10.10s 0x%016llx 0x%016llx" 1273 1274# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide 1275# for a series of one or more 32-bit got table entries that align with one of 1276# the initial titles. 1277 1278@ MSG_GOT_COLUMNS1_32 " index ref offset addend symbol" 1279@ MSG_GOT_COLUMNS2_32 " index ref offset value symbol" 1280@ MSG_GOT_FORMAT1_32 "%10.10s %3s 0x%08llx 0x%08llx %s" 1281@ MSG_GOT_FORMAT2_32 "%10.10s %3s 0x%08llx 0x%08llx %s:%s" 1282 1283# TRANSLATION_NOTE - the following three entries are used by ld(1), and provide 1284# for a series of one or more 64-bit got table entries that align with one of 1285# the initial titles. 1286 1287@ MSG_GOT_COLUMNS1_64 " index ref offset \ 1288 addend symbol" 1289@ MSG_GOT_COLUMNS2_64 " index ref offset \ 1290 value symbol" 1291@ MSG_GOT_FORMAT1_64 "%10.10s %3s 0x%016llx 0x%016llx %s" 1292@ MSG_GOT_FORMAT2_64 "%10.10s %3s 0x%016llx 0x%016llx %s:%s" 1293 1294# Version table entries. 1295@ MSG_VER_DEF " index version dependency" 1296@ MSG_VER_NEED " file version" 1297@ MSG_VER_NEED_GNUVER " index file version" 1298 1299@ MSG_VER_LINE_1 "%10.10s %-26.26s %-20s %s" 1300@ MSG_VER_LLINE_1 "%10s %-26s %-20s %s" 1301@ MSG_VER_LINE_2 "%47s %s" 1302@ MSG_VER_LINE_3 "%38s %-20s %s" 1303@ MSG_VER_LINE_4 " %s" 1304@ MSG_VER_LINE_5 " %-26.26s %s" 1305@ MSG_VER_LLINE_5 " %-26s %s" 1306 1307 1308# Relocation entries. 1309# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1310# strings provide for a series of one or more 32-bit relocation table entries, 1311# using truncated section names, that align with one of the initial titles. 1312 1313@ MSG_REL_EFSA_TITLE_32 " type offset addend \ 1314 section symbol" 1315@ MSG_REL_EFSN_TITLE_32 " type offset \ 1316 section symbol" 1317@ MSG_REL_EFSA_ENTRY_32 " %-24s %#10llx %#10llx %-14.14s %s" 1318@ MSG_REL_EFSN_ENTRY_32 " %-24s %#10llx %-14.14s %s" 1319 1320# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1321# strings provide for a series of one or more 32-bit relocation table entries, 1322# using long section names, that align with one of the initial titles. 1323 1324@ MSG_REL_EFLA_TITLE_32 " type offset addend \ 1325 section / symbol" 1326@ MSG_REL_EFLN_TITLE_32 " type offset \ 1327 section / symbol" 1328@ MSG_REL_EFLA_ENTRY_32 " %-24s %#10llx %#10llx %-14s %s" 1329@ MSG_REL_EFLN_ENTRY_32 " %-24s %#10llx %-14s %s" 1330 1331 1332# TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These 1333# strings provide for a series of one or more 32-bit relocation table entries, 1334# that align with the initial titles. 1335 1336@ MSG_REL_RTA_TITLE_32 " type offset \ 1337 addend symbol" 1338@ MSG_REL_RTN_TITLE_32 " type offset \ 1339 value symbol" 1340@ MSG_REL_RTV_TITLE_32 " value" 1341@ MSG_REL_RTA_ENTRY_32 " %5s %-24s %#10llx %#10llx %s %s" 1342@ MSG_REL_RTN_ENTRY_32 " %5s %-24s %#10llx %s %s" 1343@ MSG_REL_RT_APLVAL_32 " apply %#10llx %#10llx" 1344@ MSG_REL_RT_APLREG_32 " apply %10.10s %#10llx" 1345 1346 1347# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1348# provide for a series of one or more 32-bit relocation table entries, using 1349# truncated section names, that align with one of the initial titles. 1350 1351@ MSG_REL_LDSA_TITLE_32 " type \ 1352 offset addend section symbol" 1353@ MSG_REL_LDSN_TITLE_32 " type \ 1354 offset section symbol" 1355@ MSG_REL_LDSA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14.14s %s %s" 1356@ MSG_REL_LDSN_ENTRY_32 " %5s %-24s %#10llx %-14.14s %s %s" 1357 1358@ MSG_REL_LDSV_TITLE_32 " type \ 1359 offset value section symbol" 1360 1361# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1362# provide for a series of one or more 32-bit relocation table entries, using 1363# long section names, that align with one of the initial titles. 1364 1365@ MSG_REL_LDLA_TITLE_32 " type \ 1366 offset addend section / symbol" 1367@ MSG_REL_LDLN_TITLE_32 " type \ 1368 offset section / symbol" 1369@ MSG_REL_LDLA_ENTRY_32 " %5s %-24s %#10llx %#10llx %-14s %s %s" 1370@ MSG_REL_LDLN_ENTRY_32 " %5s %-24s %#10llx %-14s %s %s" 1371 1372@ MSG_REL_LDLV_TITLE_32 " type \ 1373 offset value section / symbol" 1374 1375# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1376# strings provide for a series of one or more 64-bit relocation table entries, 1377# using truncated section names, that align with one of the initial titles. 1378 1379@ MSG_REL_EFSA_TITLE_64 " type \ 1380 offset addend section symbol" 1381@ MSG_REL_EFSN_TITLE_64 " type \ 1382 offset section symbol" 1383@ MSG_REL_EFSA_ENTRY_64 " %-24s %#18llx %#18llx %-14.14s %s" 1384@ MSG_REL_EFSN_ENTRY_64 " %-24s %#18llx %-14.14s %s" 1385 1386# TRANSLATION_NOTE - the following strings are used by elfdump(1). These 1387# strings provide for a series of one or more 64-bit relocation table entries, 1388# using long section names, that align with one of the initial titles. 1389 1390@ MSG_REL_EFLA_TITLE_64 " type \ 1391 offset addend section / symbol" 1392@ MSG_REL_EFLN_TITLE_64 " type \ 1393 offset section / symbol" 1394@ MSG_REL_EFLA_ENTRY_64 " %-24s %#18llx %#18llx %-14s %s" 1395@ MSG_REL_EFLN_ENTRY_64 " %-24s %#18llx %-14s %s" 1396 1397 1398# TRANSLATION_NOTE - the following strings are used by ld.so.1(1). These 1399# strings provide for a series of one or more 64-bit relocation table entries, 1400# that align with the initial titles. 1401 1402@ MSG_REL_RTA_TITLE_64 " type \ 1403 offset addend symbol" 1404@ MSG_REL_RTN_TITLE_64 " type \ 1405 offset value symbol" 1406@ MSG_REL_RTV_TITLE_64 " value" 1407@ MSG_REL_RTA_ENTRY_64 " %5s %-24s %#18llx %#18llx %s %s" 1408@ MSG_REL_RTN_ENTRY_64 " %5s %-24s %#18llx %s %s" 1409@ MSG_REL_RT_APLVAL_64 " apply %#18llx %#18llx" 1410@ MSG_REL_RT_APLREG_64 " apply %18.18s %#18llx" 1411 1412# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1413# provide for a series of one or more 64-bit relocation table entries, using 1414# truncated section names, that align with one of the initial titles. 1415 1416@ MSG_REL_LDSA_TITLE_64 " type \ 1417 offset addend section symbol" 1418@ MSG_REL_LDSN_TITLE_64 " type \ 1419 offset section symbol" 1420@ MSG_REL_LDSA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14.14s %s %s" 1421@ MSG_REL_LDSN_ENTRY_64 " %5s %-24s %#18llx %-14.14s %s %s" 1422 1423@ MSG_REL_LDSV_TITLE_64 " type \ 1424 offset value section symbol" 1425 1426# TRANSLATION_NOTE - the following strings are used by ld(1). These strings 1427# provide for a series of one or more 64-bit relocation table entries, using 1428# long section names, that align with one of the initial titles. 1429 1430@ MSG_REL_LDLA_TITLE_64 " type \ 1431 offset addend section / symbol" 1432@ MSG_REL_LDLN_TITLE_64 " type \ 1433 offset section / symbol" 1434@ MSG_REL_LDLA_ENTRY_64 " %5s %-24s %#18llx %#18llx %-14s %s %s" 1435@ MSG_REL_LDLN_ENTRY_64 " %5s %-24s %#18llx %-14s %s %s" 1436 1437@ MSG_REL_LDLV_TITLE_64 " type \ 1438 offset value section / symbol" 1439 1440# dl*() family messages 1441 1442@ MSG_DL_IPHDR_ENTER "dl_iterate_phdr() called from file=%s" 1443@ MSG_DL_IPHDR_MAPCNG "dl_iterate_phdr() object map/unmap in callback" 1444@ MSG_DL_IPHDR_UNMAP "dl_iterate_phdr() early return due to object unmap" 1445@ MSG_DL_IPHDR_CALLBACK "dl_iterate_phdr() callback" 1446@ MSG_DL_IPHDR_NAME " dlpi_name: %s" 1447@ MSG_DL_IPHDR_MAPCNT " dlpi_adds: %-18llu dlpi_subs: %-18llu" 1448 1449@ MSG_DL_IPHDR_ADDR_32 " dlpi_addr: %#-10llx" 1450@ MSG_DL_IPHDR_PHDR_32 " dlpi_phdr: %#-10llx dlpi_phnum: %u" 1451 1452@ MSG_DL_IPHDR_ADDR_64 " dlpi_addr: %#-18llx" 1453@ MSG_DL_IPHDR_PHDR_64 " dlpi_phdr: %#-18llx dlpi_phnum: %u" 1454 1455@ MSG_DL_DLCLOSE "file=%s; dlclose() called from file=%s %s" 1456@ MSG_DL_DLDUMP "file=%s; dldump() called from file=%s: dumping to \ 1457 file=%s %s" 1458@ MSG_DL_DLOPEN "file=%s; dlopen() called from file=%s %s %s" 1459 1460@ MSG_DL_DLADDR "dladdr() called from file=%s: %#llx" 1461@ MSG_DL_DLERROR "dlerror() called from file=%s: %s" 1462@ MSG_DL_DLINFO "dlinfo() called from file=%s: handle=%s, request=%s, \ 1463 user data=%#llx" 1464 1465@ _END_ 1466 1467# Debug enabling tokens (for now these are untranslated) 1468 1469@ MSG_TOK_ALL "all" 1470@ MSG_TOK_ARGS "args" 1471@ MSG_TOK_BINDINGS "bindings" 1472@ MSG_TOK_DL "dl" 1473@ MSG_TOK_CAP "cap" 1474@ MSG_TOK_BASIC "basic" 1475@ MSG_TOK_ENTRY "entry" 1476@ MSG_TOK_FILES "files" 1477@ MSG_TOK_HELP "help" 1478@ MSG_TOK_INIT "init" 1479@ MSG_TOK_LIBS "libs" 1480@ MSG_TOK_MAP "map" 1481@ MSG_TOK_RELOC "reloc" 1482@ MSG_TOK_SECTIONS "sections" 1483@ MSG_TOK_SEGMENTS "segments" 1484@ MSG_TOK_SUPPORT "support" 1485@ MSG_TOK_SYMBOLS "symbols" 1486@ MSG_TOK_TLS "tls" 1487@ MSG_TOK_VERSIONS "versions" 1488@ MSG_TOK_AUDIT "audit" 1489@ MSG_TOK_GOT "got" 1490@ MSG_TOK_MOVE "move" 1491@ MSG_TOK_DEMANGLE "demangle" 1492@ MSG_TOK_STRTAB "strtab" 1493@ MSG_TOK_STATS "statistics" 1494@ MSG_TOK_UNUSED "unused" 1495 1496@ MSG_TOK_DETAIL "detail" 1497@ MSG_TOK_LONG "long" 1498@ MSG_TOK_NAME "name" 1499@ MSG_TOK_FULLNAME "fullname" 1500@ MSG_TOK_CLASS "class" 1501@ MSG_TOK_LMID "lmid" 1502@ MSG_TOK_TTIME "ttime" 1503@ MSG_TOK_DTIME "dtime" 1504 1505@ MSG_TOK_OUTFILE "output" 1506 1507@ MSG_TOK_LMID_ALL "ALL" 1508@ MSG_TOK_LMID_ALT "ALT" 1509@ MSG_TOK_LMID_BASE "BASE" 1510@ MSG_TOK_LMID_LDSO "LDSO" 1511 1512 1513# The following strings represent reserved words, files, pathnames and symbols. 1514# Reference to this strings is via the MSG_ORIG() macro, and thus no message 1515# translation is required. 1516 1517@ MSG_STR_EMPTY "" 1518@ MSG_STR_DELIMIT ",:" 1519@ MSG_STR_COMDAT "COMDAT " 1520 1521@ MSG_SCN_GOT ".got" 1522@ MSG_SCN_PLT ".plt" 1523@ MSG_SCN_BSS ".bss" 1524@ MSG_SCN_INIT ".init" 1525@ MSG_SCN_FINI ".fini" 1526@ MSG_SCN_INITARRAY ".initarray" 1527@ MSG_SCN_FINIARRAY ".finiarray" 1528@ MSG_SCN_PREINITARRAY ".preinitarray" 1529 1530@ MSG_SH_INFO "sh_info" 1531@ MSG_SH_LINK "sh_link" 1532 1533@ MSG_UTL_SCC_ENTRY " [%d] %s" 1534 1535@ MSG_FMT_INDEX " [%d]" 1536@ MSG_FMT_INDEX_RANGE " [%d-%d]" 1537@ MSG_FMT_STR "%s" 1538@ MSG_FMT_PATH "%s/%s" 1539 1540@ MSG_PTH_OBJECT "/tmp/ld.so-OBJECT-" 1541 1542@ MSG_SUNW_OST_SGS "SUNW_OST_SGS" 1543 1544# Entrance criteria messages 1545 1546@ MSG_ECR_NAME " ec_name: %s" 1547@ MSG_ECR_FLAGS " ec_flags: %s" 1548@ MSG_ECR_IS_NAME " ec_is_name: %-8s ec_attrmask: %s" 1549@ MSG_ECR_SEGMENT " ec_segment: %-8s ec_attrbits: %s" 1550@ MSG_ECR_NDX " ec_ordndx: %-8d ec_type: %s" 1551@ MSG_ECR_FILES " ec_files:" 1552@ MSG_ECR_FILE " %-21s %s" 1553 1554@ MSG_MAP_SORT_SEG " %s" 1555@ MSG_MAP_SORT_SEG_NAME " %-20s %s" 1556@ MSG_MAP_SORT_SEG_V " %-20s %-20s p_vaddr=0x%llx" 1557@ MSG_MAP_SORT_SEG_O " %-20s %-20s order=%d" 1558 1559# Libs messages 1560 1561@ MSG_LIB_FILE " %s" 1562 1563# PLT binding methods 1564 1565@ MSG_PLT_21D "21d" 1566@ MSG_PLT_24D "24d" 1567@ MSG_PLT_U32 "u32" 1568@ MSG_PLT_U44 "u44" 1569@ MSG_PLT_FULL "full" 1570@ MSG_PLT_FAR "far" 1571 1572# Segment messages 1573 1574@ MSG_SEG_DESC "segment[%d]" 1575@ MSG_SEG_NAME " sg_name: %s" 1576@ MSG_SEG_LENGTH " sg_length: %#llx" 1577@ MSG_SEG_ROUND " sg_round: %#llx" 1578@ MSG_SEG_ALIGN " sg_align: %#llx" 1579@ MSG_SEG_FLAGS " sg_flags: %s" 1580@ MSG_SEG_SIZESYM_TITLE " sg_sizesym:" 1581@ MSG_SEG_SIZESYM " %s" 1582@ MSG_SEG_IS_ORDER_TITLE " sg_is_order:" 1583@ MSG_SEG_OS_ORDER_TITLE " sg_os_order:" 1584@ MSG_SEG_LIST_ITEM " %s" 1585 1586# Section messages (used when expanding segment information) 1587 1588@ MSG_SEC_NAME " section[%d] os_name: %s" 1589 1590# Symbol strings 1591 1592@ MSG_SYM_GLOBAL "global" 1593@ MSG_SYM_LOCAL "local" 1594@ MSG_SYM_COPY "copy rel" 1595 1596@ MSG_DLSYM_NEXT "[ RTLD_NEXT ]" 1597@ MSG_DLSYM_DEFAULT "[ RTLD_DEFAULT ]" 1598@ MSG_DLSYM_SELF "[ RTLD_SELF ]" 1599@ MSG_DLSYM_PROBE "[ RTLD_PROBE ]" 1600@ MSG_DLSYM_SINGLETON "( singleton reference )" 1601 1602# Link-map mode strings 1603 1604@ MSG_MODE_GLOBNODEL "[ GLOBAL NODELETE ]" 1605@ MSG_MODE_GLOB "[ GLOBAL ]" 1606@ MSG_MODE_NODEL "[ NODELETE ]" 1607 1608# NOTE: these are used by lari(1), use care when changing. 1609@ MSG_BINFO_START " (" 1610@ MSG_BINFO_DIRECT "direct" 1611@ MSG_BINFO_INTERPOSE "interpose" 1612@ MSG_BINFO_COPYREF "copy-ref" 1613@ MSG_BINFO_FILTEE "filtee" 1614@ MSG_BINFO_PLTADDR "plt-addr" 1615@ MSG_BINFO_END ")" 1616@ MSG_BINFO_SEP "," 1617 1618# Utility messages 1619 1620@ MSG_UTL_EVNT_PREINIT "RD_PREINIT" 1621@ MSG_UTL_EVNT_POSTINIT "RD_POSTINIT" 1622@ MSG_UTL_EVNT_DLACT "RD_DLACTIVITY" 1623 1624@ MSG_UTL_STA_ADD "RT_ADD" 1625@ MSG_UTL_STA_DELETE "RT_DELETE" 1626@ MSG_UTL_STA_CONSIST "RT_CONSISTENT" 1627 1628# Version messages 1629 1630@ MSG_VER_SELECTED " SELECTED %-26.26s %s" 1631@ MSG_VER_L_SELECTED " SELECTED %-26s %s" 1632@ MSG_VER_ALL " ALL %-26.26s" 1633@ MSG_VER_L_ALL " ALL %-26s" 1634 1635# Global offset table entries. 1636 1637@ MSG_GOT_INDEX " [%d]" 1638@ MSG_GOT_SMALL_PIC "pic" 1639@ MSG_GOT_BIG_PIC "PIC" 1640 1641@ MSG_CNTL_ENTRY " [0x%llx] %s" 1642 1643@ MSG_STR_NL "\n" 1644@ MSG_STR_LDVER "Solaris Linkers: %s" 1645 1646@ MSG_FMT_INDEX " [%d]" 1647@ MSG_FMT_ISEC_NAME "[%u]%s" 1648@ MSG_FMT_MEMUNIT " (%lld%c)" 1649 1650@ MSG_SUNW_OST_SGS "SUNW_OST_SGS" 1651 1652@ MSG_ELF_MAGIC " ei_magic: { 0x%x, %c, %c, %c }" 1653@ MSG_ELF_CLASS " ei_class: %-18s ei_data: %s" 1654@ MSG_ELF_OSABI " ei_osabi: %-18s ei_abiversion: %s" 1655@ MSG_ELF_MACHINE " e_machine: %-18s e_version: %s" 1656@ MSG_ELF_TYPE " e_type: %s" 1657@ MSG_ELF_FLAGS " e_flags: %18s" 1658@ MSG_ELF_FLAGS_FMT " e_flags: %s" 1659@ MSG_ELF_ESIZE " e_entry: %#18llx e_ehsize: %2d \ 1660 e_shstrndx: %d" 1661@ MSG_ELFX_ESIZE " e_entry: %#18llx e_ehsize: %2d \ 1662 e_shstrndx: SHN_XINDEX (see shdr[0].sh_link)" 1663@ MSG_ELF_SHOFF " e_shoff: %#18llx e_shentsize: %2d \ 1664 e_shnum: %d" 1665@ MSG_ELFX_SHOFF " e_shoff: %#18llx e_shentsize: %2d \ 1666 e_shnum: 0 (see shdr[0].sh_size)" 1667@ MSG_ELF_PHOFF " e_phoff: %#18llx e_phentsize: %2d \ 1668 e_phnum: %d" 1669@ MSG_ELFX_PHOFF " e_phoff: %#18llx e_phentsize: %2d \ 1670 e_phnum: PN_XNUM (see shdr[0].sh_info)" 1671 1672# Shdr[0] messages 1673 1674@ MSG_SHD0_TITLE "Section Header[0]: (ELF Ehdr extensions)" 1675@ MSG_SHD0_ADDR " sh_addr: %-6lld sh_flags: %s" 1676@ MSG_SHD0_SIZE " sh_size: %-6lld (e_shnum) sh_type: %s" 1677@ MSG_SHD0_OFFSET " sh_offset: %-6lld \ 1678 sh_entsize: %lld" 1679@ MSG_SHD0_LINK " sh_link: %-6d (e_shstrndx) sh_info: \ 1680 %d (e_phnum)" 1681@ MSG_SHD0_ALIGN " sh_addralign: %-6lld" 1682 1683# Section header messages 1684 1685@ MSG_SHD_ADDR_32 " sh_addr: %#-10llx sh_flags: %s" 1686@ MSG_SHD_SIZE_32 " sh_size: %#-10llx sh_type: %s" 1687@ MSG_SHD_OFFSET_32 " sh_offset: %#-10llx sh_entsize: %#llx" 1688@ MSG_SHD_OFFSET_ENT_32 " sh_offset: %#-10llx sh_entsize: %#llx \ 1689 (%lld %s)" 1690@ MSG_SHD_LINK_32 " sh_link: %-14s sh_info: %s" 1691@ MSG_SHD_ALIGN_32 " sh_addralign: %#-10llx" 1692 1693@ MSG_SHD_ADDR_64 " sh_addr: %#-18llx sh_flags: %s" 1694@ MSG_SHD_SIZE_64 " sh_size: %#-18llx sh_type: %s" 1695@ MSG_SHD_OFFSET_64 " sh_offset: %#-18llx sh_entsize: %#llx" 1696@ MSG_SHD_OFFSET_ENT_64 " sh_offset: %#-18llx sh_entsize: %#llx \ 1697 (%lld %s)" 1698@ MSG_SHD_LINK_64 " sh_link: %-18s sh_info: %s" 1699@ MSG_SHD_ALIGN_64 " sh_addralign: %#-18llx" 1700 1701# Program header messages 1702 1703@ MSG_PHD_VADDR_32 " p_vaddr: %#-10llx p_flags: %s" 1704@ MSG_PHD_PADDR_32 " p_paddr: %#-10llx p_type: %s" 1705@ MSG_PHD_FILESZ_32 " p_filesz: %#-10llx p_memsz: %#llx" 1706@ MSG_PHD_OFFSET_32 " p_offset: %#-10llx p_align: %#llx" 1707 1708@ MSG_PHD_VADDR_64 " p_vaddr: %#-18llx p_flags: %s" 1709@ MSG_PHD_PADDR_64 " p_paddr: %#-18llx p_type: %s" 1710@ MSG_PHD_FILESZ_64 " p_filesz: %#-18llx p_memsz: %#llx" 1711@ MSG_PHD_OFFSET_64 " p_offset: %#-18llx p_align: %#llx" 1712 1713# Syminfo formats 1714 1715@ MSG_SYMINFO_UNKFLAG "[0x%x]" 1716 1717# Lc_interface interface tags. 1718 1719@ MSG_CI_NULL "NULL" 1720@ MSG_CI_VERSION "VERSION" 1721@ MSG_CI_ATEXIT "ATEXIT" 1722@ MSG_CI_LCMESSAGES "LCMESSAGES" 1723@ MSG_CI_BIND_GUARD "BIND_GUARD" 1724@ MSG_CI_BIND_CLEAR "BIND_CLEAR" 1725@ MSG_CI_THR_SELF "THR_SELF" 1726@ MSG_CI_TLS_MODADD "TLS_MODADD" 1727@ MSG_CI_TLS_MODREM "TLS_MODREM" 1728@ MSG_CI_TLS_STATMOD "TLS_STATMOD" 1729@ MSG_CI_THRINIT "THRINIT" 1730@ MSG_CI_CRITICAL "CRITICAL" 1731 1732# TLS information flags 1733 1734@ MSG_TLS_FLAG_STATIC "STATIC-TLS" 1735 1736# mmapobj() mr_flags. 1737 1738@ MSG_MR_PADDING "[ PADDING ]" 1739@ MSG_MR_HDR_ELF "[ HDR_ELF ]" 1740@ MSG_MR_HDR_AOUT "[ HDR_AOUT ]" 1741