1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 1988 AT&T 24 * All Rights Reserved 25 * 26 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 27 * Use is subject to license terms. 28 */ 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 /* 32 * This file contains the functions responsible for opening the output file 33 * image, associating the appropriate input elf structures with the new image, 34 * and obtaining new elf structures to define the new image. 35 */ 36 #include <stdio.h> 37 #include <sys/stat.h> 38 #include <fcntl.h> 39 #include <link.h> 40 #include <errno.h> 41 #include <string.h> 42 #include <limits.h> 43 #include <debug.h> 44 #include <unistd.h> 45 #include "msg.h" 46 #include "_libld.h" 47 48 /* 49 * Determine a least common multiplier. Input sections contain an alignment 50 * requirement, which elf_update() uses to insure that the section is aligned 51 * correctly off of the base of the elf image. We must also insure that the 52 * sections mapping is congruent with this alignment requirement. For each 53 * input section associated with a loadable segment determine whether the 54 * segments alignment must be adjusted to compensate for a sections alignment 55 * requirements. 56 */ 57 Xword 58 ld_lcm(Xword a, Xword b) 59 { 60 Xword _r, _a, _b; 61 62 if ((_a = a) == 0) 63 return (b); 64 if ((_b = b) == 0) 65 return (a); 66 67 if (_a > _b) 68 _a = b, _b = a; 69 while ((_r = _b % _a) != 0) 70 _b = _a, _a = _r; 71 return ((a / _a) * b); 72 } 73 74 /* 75 * Open the output file and insure the correct access modes. 76 */ 77 uintptr_t 78 ld_open_outfile(Ofl_desc * ofl) 79 { 80 mode_t mode; 81 struct stat status; 82 83 /* 84 * Determine the required file mode from the type of output file we 85 * are creating. 86 */ 87 mode = (ofl->ofl_flags & (FLG_OF_EXEC | FLG_OF_SHAROBJ)) 88 ? 0777 : 0666; 89 90 /* Determine if the output file already exists */ 91 if (stat(ofl->ofl_name, &status) == 0) { 92 if ((status.st_mode & S_IFMT) != S_IFREG) { 93 /* 94 * It is not a regular file, so don't delete it 95 * or allow it to be deleted. This allows root 96 * users to specify /dev/null output file for 97 * verification links. 98 */ 99 ofl->ofl_flags1 |= FLG_OF1_NONREG; 100 } else { 101 /* 102 * It's a regular file, so unlink it. In standard 103 * Unix fashion, the old file will continue to 104 * exist until its link count drops to 0 and no 105 * process has the file open. In the meantime, we 106 * create a new file (inode) under the same name, 107 * available for new use. 108 * 109 * The advantage of this policy is that creating 110 * a new executable or sharable library does not 111 * corrupt existing processes using the old file. 112 * A possible disadvantage is that if the existing 113 * file has a (link_count > 1), the other names will 114 * continue to reference the old inode, thus 115 * breaking the link. 116 * 117 * A subtlety here is that POSIX says we are not 118 * supposed to replace a non-writable file, which 119 * is something that unlink() is happy to do. The 120 * only 100% reliable test against this is to open 121 * the file for non-destructive write access. If the 122 * open succeeds, we are clear to unlink it, and if 123 * not, then the error generated is the error we 124 * need to report. 125 */ 126 if ((ofl->ofl_fd = open(ofl->ofl_name, O_RDWR, 127 mode)) < 0) { 128 int err = errno; 129 130 if (err != ENOENT) { 131 eprintf(ofl->ofl_lml, ERR_FATAL, 132 MSG_INTL(MSG_SYS_OPEN), 133 ofl->ofl_name, strerror(err)); 134 return (S_ERROR); 135 } 136 } else { 137 (void) close(ofl->ofl_fd); 138 } 139 140 if ((unlink(ofl->ofl_name) == -1) && 141 (errno != ENOENT)) { 142 int err = errno; 143 144 eprintf(ofl->ofl_lml, ERR_FATAL, 145 MSG_INTL(MSG_SYS_UNLINK), 146 ofl->ofl_name, strerror(err)); 147 return (S_ERROR); 148 } 149 } 150 } 151 152 /* 153 * Open (or create) the output file name (ofl_fd acts as a global 154 * flag to ldexit() signifying whether the output file should be 155 * removed or not on error). 156 */ 157 if ((ofl->ofl_fd = open(ofl->ofl_name, O_RDWR | O_CREAT | O_TRUNC, 158 mode)) < 0) { 159 int err = errno; 160 161 eprintf(ofl->ofl_lml, ERR_FATAL, MSG_INTL(MSG_SYS_OPEN), 162 ofl->ofl_name, strerror(err)); 163 return (S_ERROR); 164 } 165 166 return (1); 167 } 168 169 170 /* 171 * If we are creating a memory model we need to update the present memory image. 172 * First we need to call elf_update(ELF_C_NULL) which will calculate the offsets 173 * of each section and its associated data buffers. From this information we 174 * can then determine what padding is required. 175 * Two actions are necessary to convert the present disc image into a memory 176 * image: 177 * 178 * o Loadable segments must be padded so that the next segments virtual 179 * address and file offset are the same. 180 * 181 * o NOBITS sections must be converted into allocated, null filled sections. 182 */ 183 static uintptr_t 184 pad_outfile(Ofl_desc *ofl) 185 { 186 Listnode *lnp; 187 off_t offset; 188 Elf_Scn *oscn = 0; 189 Sg_desc *sgp; 190 Ehdr *ehdr; 191 192 /* 193 * Update all the elf structures. This will assign offsets to the 194 * section headers and data buffers as they relate to the new image. 195 */ 196 if (elf_update(ofl->ofl_welf, ELF_C_NULL) == -1) { 197 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_UPDATE), 198 ofl->ofl_name); 199 return (S_ERROR); 200 } 201 if ((ehdr = elf_getehdr(ofl->ofl_welf)) == NULL) { 202 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_GETEHDR), 203 ofl->ofl_name); 204 return (S_ERROR); 205 } 206 207 /* 208 * Initialize the offset by skipping the Elf header and program 209 * headers. 210 */ 211 offset = ehdr->e_phoff + (ehdr->e_phnum * ehdr->e_phentsize); 212 213 /* 214 * Traverse the segment list looking for loadable segments. 215 */ 216 for (LIST_TRAVERSE(&ofl->ofl_segs, lnp, sgp)) { 217 Phdr *phdr = &(sgp->sg_phdr); 218 Os_desc *osp; 219 Aliste idx; 220 221 /* 222 * If we've already processed a loadable segment, the `scn' 223 * variable will be initialized to the last section that was 224 * part of that segment. Add sufficient padding to this section 225 * to cause the next segments virtual address and file offset to 226 * be the same. 227 */ 228 if (oscn && (phdr->p_type == PT_LOAD)) { 229 Elf_Data * data; 230 size_t size; 231 232 size = (size_t)(S_ROUND(offset, phdr->p_align) - 233 offset); 234 235 if ((data = elf_newdata(oscn)) == NULL) { 236 eprintf(ofl->ofl_lml, ERR_ELF, 237 MSG_INTL(MSG_ELF_NEWDATA), ofl->ofl_name); 238 return (S_ERROR); 239 } 240 if ((data->d_buf = libld_calloc(size, 1)) == 0) 241 return (S_ERROR); 242 243 data->d_type = ELF_T_BYTE; 244 data->d_size = size; 245 data->d_align = 1; 246 data->d_version = ofl->ofl_dehdr->e_version; 247 } 248 249 /* 250 * Traverse the output sections for this segment calculating the 251 * offset of each section. Retain the final section descriptor 252 * as this will be where any padding buffer will be added. 253 */ 254 for (APLIST_TRAVERSE(sgp->sg_osdescs, idx, osp)) { 255 Shdr *shdr = osp->os_shdr; 256 257 offset = (off_t)S_ROUND(offset, shdr->sh_addralign); 258 offset += shdr->sh_size; 259 260 /* 261 * If this is a NOBITS output section convert all of 262 * its associated input sections into real, null filled, 263 * data buffers, and change the section to PROGBITS. 264 */ 265 if (shdr->sh_type == SHT_NOBITS) 266 shdr->sh_type = SHT_PROGBITS; 267 } 268 269 /* 270 * If this is a loadable segment retain the last output section 271 * descriptor. This acts both as a flag that a loadable 272 * segment has been seen, and as the segment to which a padding 273 * buffer will be added. 274 */ 275 if (phdr->p_type == PT_LOAD) 276 oscn = osp->os_scn; 277 } 278 return (1); 279 } 280 281 /* 282 * Create an output section. The first instance of an input section triggers 283 * the creation of a new output section. 284 */ 285 static uintptr_t 286 create_outsec(Ofl_desc *ofl, Sg_desc *sgp, Os_desc *osp, Word ptype, int shidx, 287 Boolean fixalign) 288 { 289 Elf_Scn *scn; 290 Shdr *shdr; 291 292 /* 293 * Get a section descriptor for the section. 294 */ 295 if ((scn = elf_newscn(ofl->ofl_welf)) == NULL) { 296 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_NEWSCN), 297 ofl->ofl_name); 298 return (S_ERROR); 299 } 300 osp->os_scn = scn; 301 302 /* 303 * Get a new section header table entry and copy the pertinent 304 * information from the in-core descriptor. 305 */ 306 if ((shdr = elf_getshdr(scn)) == NULL) { 307 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_GETSHDR), 308 ofl->ofl_name); 309 return (S_ERROR); 310 } 311 *shdr = *(osp->os_shdr); 312 osp->os_shdr = shdr; 313 314 /* 315 * If this is the first section within a loadable segment, and the 316 * alignment needs to be updated, record this section. 317 */ 318 if ((fixalign == TRUE) && (ptype == PT_LOAD) && (shidx == 1)) 319 sgp->sg_fscn = scn; 320 321 /* 322 * Remove any SHF_ORDERED or SHF_LINK_ORDER flags. If we are not 323 * building a relocatable object, remove any SHF_GROUP flag. 324 */ 325 osp->os_shdr->sh_flags &= ~ALL_SHF_ORDER; 326 if ((ofl->ofl_flags & FLG_OF_RELOBJ) == 0) 327 osp->os_shdr->sh_flags &= ~SHF_GROUP; 328 329 /* 330 * If this is a TLS section, save it so that the PT_TLS program header 331 * information can be established after the output image has been 332 * initially created. At this point, all TLS input sections are ordered 333 * as they will appear in the output image. 334 */ 335 if ((ofl->ofl_flags & FLG_OF_TLSPHDR) && 336 (osp->os_shdr->sh_flags & SHF_TLS) && 337 (list_appendc(&ofl->ofl_ostlsseg, osp) == 0)) 338 return (S_ERROR); 339 340 return (0); 341 } 342 343 /* 344 * Create the elf structures that allow the input data to be associated with the 345 * new image: 346 * 347 * o define the new elf image using elf_begin(), 348 * 349 * o obtain an elf header for the image, 350 * 351 * o traverse the input segments and create a program header array 352 * to define the required segments, 353 * 354 * o traverse the output sections for each segment assigning a new 355 * section descriptor and section header for each, 356 * 357 * o traverse the input sections associated with each output section 358 * and assign a new data descriptor to each (each output section 359 * becomes a linked list of input data buffers). 360 */ 361 uintptr_t 362 ld_create_outfile(Ofl_desc *ofl) 363 { 364 Listnode *lnp1; 365 Sg_desc *sgp; 366 Os_desc *osp; 367 Is_desc *isp; 368 Elf_Data *tlsdata = 0; 369 Aliste idx; 370 Word flags = ofl->ofl_flags; 371 Word flags1 = ofl->ofl_flags1; 372 size_t ndx = 0, fndx = 0; 373 Elf_Cmd cmd; 374 Boolean fixalign = FALSE; 375 int fd, nseg = 0, shidx = 0, dataidx = 0, ptloadidx = 0; 376 377 /* 378 * If DF_1_NOHDR was set in map_parse() or FLG_OF1_VADDR was set, 379 * we need to do alignment adjustment. 380 */ 381 if ((flags1 & FLG_OF1_VADDR) || 382 (ofl->ofl_dtflags_1 & DF_1_NOHDR)) { 383 fixalign = TRUE; 384 } 385 386 if (flags1 & FLG_OF1_MEMORY) { 387 cmd = ELF_C_IMAGE; 388 fd = 0; 389 } else { 390 fd = ofl->ofl_fd; 391 cmd = ELF_C_WRITE; 392 } 393 394 /* 395 * If there are any ordered sections, handle them here. 396 */ 397 if ((ofl->ofl_ordered.head != NULL) && 398 (ld_sort_ordered(ofl) == S_ERROR)) 399 return (S_ERROR); 400 401 /* 402 * Tell the access library about our new temporary file. 403 */ 404 if ((ofl->ofl_welf = elf_begin(fd, cmd, 0)) == NULL) { 405 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_BEGIN), 406 ofl->ofl_name); 407 return (S_ERROR); 408 } 409 410 /* 411 * Obtain a new Elf header. 412 */ 413 if ((ofl->ofl_nehdr = elf_newehdr(ofl->ofl_welf)) == NULL) { 414 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_NEWEHDR), 415 ofl->ofl_name); 416 return (S_ERROR); 417 } 418 ofl->ofl_nehdr->e_machine = ofl->ofl_dehdr->e_machine; 419 420 DBG_CALL(Dbg_util_nl(ofl->ofl_lml, DBG_NL_STD)); 421 for (LIST_TRAVERSE(&ofl->ofl_segs, lnp1, sgp)) { 422 int frst = 0; 423 Phdr *phdr = &(sgp->sg_phdr); 424 Word ptype = phdr->p_type; 425 426 /* 427 * Count the number of segments that will go in the program 428 * header table. If a segment is empty, ignore it. 429 */ 430 if (!(flags & FLG_OF_RELOBJ)) { 431 if (ptype == PT_PHDR) { 432 /* 433 * If we are generating an interp section (and 434 * thus an associated PT_INTERP program header 435 * entry) also generate a PT_PHDR program header 436 * entry. This allows the kernel to generate 437 * the appropriate aux vector entries to pass to 438 * the interpreter (refer to exec/elf/elf.c). 439 * Note that if an image was generated with an 440 * interp section, but no associated PT_PHDR 441 * program header entry, the kernel will simply 442 * pass the interpreter an open file descriptor 443 * when the image is executed). 444 */ 445 if (ofl->ofl_osinterp) 446 nseg++; 447 } else if (ptype == PT_INTERP) { 448 if (ofl->ofl_osinterp) 449 nseg++; 450 } else if (ptype == PT_DYNAMIC) { 451 if (flags & FLG_OF_DYNAMIC) 452 nseg++; 453 } else if (ptype == PT_TLS) { 454 if (flags & FLG_OF_TLSPHDR) 455 nseg++; 456 #if defined(_ELF64) 457 } else if ((ld_targ.t_m.m_mach == EM_AMD64) && 458 (ptype == PT_SUNW_UNWIND)) { 459 if (ofl->ofl_unwindhdr) 460 nseg++; 461 #endif 462 } else if (ptype == PT_SUNWBSS) { 463 if (ofl->ofl_issunwbss) 464 nseg++; 465 } else if (ptype == PT_SUNWDTRACE) { 466 if (ofl->ofl_dtracesym) 467 nseg++; 468 } else if (ptype == PT_SUNWCAP) { 469 if (ofl->ofl_oscap) 470 nseg++; 471 } else if (sgp->sg_flags & FLG_SG_EMPTY) { 472 nseg++; 473 } else if (sgp->sg_osdescs != NULL) { 474 if ((sgp->sg_flags & FLG_SG_PHREQ) == 0) { 475 /* 476 * If this is a segment for which 477 * we are not making a program header, 478 * don't increment nseg 479 */ 480 ptype = (sgp->sg_phdr).p_type = PT_NULL; 481 } else if (ptype != PT_NULL) 482 nseg++; 483 } 484 } 485 486 /* 487 * If the first loadable segment has the ?N flag, 488 * then ?N will be on. 489 */ 490 if ((ptype == PT_LOAD) && (ptloadidx == 0)) { 491 ptloadidx++; 492 if (sgp->sg_flags & FLG_SG_NOHDR) { 493 fixalign = TRUE; 494 ofl->ofl_dtflags_1 |= DF_1_NOHDR; 495 } 496 } 497 498 shidx = 0; 499 for (APLIST_TRAVERSE(sgp->sg_osdescs, idx, osp)) { 500 Listnode *lnp2; 501 502 dataidx = 0; 503 for (LIST_TRAVERSE(&(osp->os_isdescs), lnp2, isp)) { 504 Elf_Data * data; 505 Ifl_desc * ifl = isp->is_file; 506 507 /* 508 * An input section in the list that has 509 * been previously marked to be discarded 510 * should be completely ignored. 511 */ 512 if (isp->is_flags & FLG_IS_DISCARD) 513 continue; 514 515 /* 516 * At this point we know whether a section has 517 * been referenced. If it hasn't, and the whole 518 * file hasn't been referenced (which would have 519 * been caught in ignore_section_processing()), 520 * give a diagnostic (-D unused,detail) or 521 * discard the section if -zignore is in effect. 522 */ 523 if (ifl && 524 (((ifl->ifl_flags & FLG_IF_FILEREF) == 0) || 525 ((ptype == PT_LOAD) && 526 ((isp->is_flags & FLG_IS_SECTREF) == 0) && 527 (isp->is_shdr->sh_size > 0)))) { 528 Lm_list *lml = ofl->ofl_lml; 529 530 if (ifl->ifl_flags & FLG_IF_IGNORE) { 531 isp->is_flags |= FLG_IS_DISCARD; 532 DBG_CALL(Dbg_unused_sec(lml, 533 isp)); 534 continue; 535 } else { 536 DBG_CALL(Dbg_unused_sec(lml, 537 isp)); 538 } 539 } 540 541 /* 542 * If this section provides no data, and isn't 543 * referenced, then it can be discarded as well. 544 * Note, if this is the first input section 545 * associated to an output section, let it 546 * through, there may be a legitimate reason why 547 * the user wants a null section. Discarding 548 * additional sections is intended to remove the 549 * empty clutter the compilers have a habit of 550 * creating. Don't provide an unused diagnostic 551 * as these sections aren't typically the users 552 * creation. 553 */ 554 if (ifl && dataidx && 555 ((isp->is_flags & FLG_IS_SECTREF) == 0) && 556 (isp->is_shdr->sh_size == 0)) { 557 isp->is_flags |= FLG_IS_DISCARD; 558 continue; 559 } 560 561 /* 562 * The first input section triggers the creation 563 * of the associated output section. 564 */ 565 if (osp->os_scn == NULL) { 566 shidx++; 567 568 if (create_outsec(ofl, sgp, osp, ptype, 569 shidx, fixalign) == S_ERROR) 570 return (S_ERROR); 571 } 572 573 dataidx++; 574 575 /* 576 * Create a new output data buffer for each 577 * input data buffer, thus linking the new 578 * buffers to the new elf output structures. 579 * Simply make the new data buffers point to 580 * the old data. 581 */ 582 if ((data = elf_newdata(osp->os_scn)) == NULL) { 583 eprintf(ofl->ofl_lml, ERR_ELF, 584 MSG_INTL(MSG_ELF_NEWDATA), 585 ofl->ofl_name); 586 return (S_ERROR); 587 } 588 *data = *(isp->is_indata); 589 isp->is_indata = data; 590 591 if ((fixalign == TRUE) && (ptype == PT_LOAD) && 592 (shidx == 1) && (dataidx == 1)) 593 data->d_align = sgp->sg_addralign; 594 595 /* 596 * Save the first TLS data buffer, as this is 597 * the start of the TLS segment. Realign this 598 * buffer based on the alignment requirements 599 * of all the TLS input sections. 600 */ 601 if ((ofl->ofl_flags & FLG_OF_TLSPHDR) && 602 (isp->is_shdr->sh_flags & SHF_TLS)) { 603 if (tlsdata == 0) 604 tlsdata = data; 605 tlsdata->d_align = 606 ld_lcm(tlsdata->d_align, 607 isp->is_shdr->sh_addralign); 608 } 609 610 #if defined(_ELF64) && defined(_ILP32) 611 /* 612 * 4106312, the 32-bit ELF64 version of ld 613 * needs to be able to create large .bss 614 * sections. The d_size member of Elf_Data 615 * only allows 32-bits in _ILP32, so we build 616 * multiple data-items that each fit into 32- 617 * bits. libelf (4106398) can summ these up 618 * into a 64-bit quantity. This only works 619 * for NOBITS sections which don't have any 620 * real data to maintain and don't require 621 * large file support. 622 */ 623 if (isp->is_shdr->sh_type == SHT_NOBITS) { 624 Xword sz = isp->is_shdr->sh_size; 625 626 while (sz >> 32) { 627 data->d_size = SIZE_MAX; 628 sz -= (Xword)SIZE_MAX; 629 630 data = elf_newdata(osp->os_scn); 631 if (data == NULL) 632 return (S_ERROR); 633 } 634 data->d_size = (size_t)sz; 635 } 636 #endif 637 638 /* 639 * If this segment requires rounding realign the 640 * first data buffer associated with the first 641 * section. 642 */ 643 if ((frst++ == 0) && 644 (sgp->sg_flags & FLG_SG_ROUND)) { 645 Xword align; 646 647 if (data->d_align) 648 align = (Xword) 649 S_ROUND(data->d_align, 650 sgp->sg_round); 651 else 652 align = sgp->sg_round; 653 654 data->d_align = (size_t)align; 655 } 656 } 657 658 /* 659 * Clear the szoutrels counter so that it can be used 660 * again in the building of relocs. See machrel.c. 661 */ 662 osp->os_szoutrels = 0; 663 } 664 } 665 666 /* 667 * Build an empty PHDR. 668 */ 669 if (nseg) { 670 if ((ofl->ofl_phdr = elf_newphdr(ofl->ofl_welf, 671 nseg)) == NULL) { 672 eprintf(ofl->ofl_lml, ERR_ELF, 673 MSG_INTL(MSG_ELF_NEWPHDR), ofl->ofl_name); 674 return (S_ERROR); 675 } 676 } 677 678 /* 679 * If we need to generate a memory model, pad the image. 680 */ 681 if (flags1 & FLG_OF1_MEMORY) { 682 if (pad_outfile(ofl) == S_ERROR) 683 return (S_ERROR); 684 } 685 686 /* 687 * After all the basic input file processing, all data pointers are 688 * referencing two types of memory: 689 * 690 * o allocated memory, ie. elf structures, internal link 691 * editor structures, and any new sections that have been 692 * created. 693 * 694 * o original input file mmap'ed memory, ie. the actual data 695 * sections of the input file images. 696 * 697 * Up until now, the only memory modifications have been carried out on 698 * the allocated memory. Before carrying out any relocations, write the 699 * new output file image and reassign any necessary data pointers to the 700 * output files memory image. This insures that any relocation 701 * modifications are made to the output file image and not to the input 702 * file image, thus preventing the creation of dirty pages and reducing 703 * the overall swap space requirement. 704 * 705 * Write out the elf structure so as to create the new file image. 706 */ 707 if ((ofl->ofl_size = (size_t)elf_update(ofl->ofl_welf, 708 ELF_C_WRIMAGE)) == (size_t)-1) { 709 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_UPDATE), 710 ofl->ofl_name); 711 return (S_ERROR); 712 } 713 714 /* 715 * Initialize the true `ofl' information with the memory images address 716 * and size. This will be used to write() out the image once any 717 * relocation processing has been completed. We also use this image 718 * information to setup a new Elf descriptor, which is used to obtain 719 * all the necessary elf pointers within the new output image. 720 */ 721 if ((ofl->ofl_elf = elf_begin(0, ELF_C_IMAGE, 722 ofl->ofl_welf)) == NULL) { 723 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_BEGIN), 724 ofl->ofl_name); 725 return (S_ERROR); 726 } 727 if ((ofl->ofl_nehdr = elf_getehdr(ofl->ofl_elf)) == NULL) { 728 eprintf(ofl->ofl_lml, ERR_ELF, MSG_INTL(MSG_ELF_GETEHDR), 729 ofl->ofl_name); 730 return (S_ERROR); 731 } 732 if (!(flags & FLG_OF_RELOBJ)) 733 if ((ofl->ofl_phdr = elf_getphdr(ofl->ofl_elf)) == NULL) { 734 eprintf(ofl->ofl_lml, ERR_ELF, 735 MSG_INTL(MSG_ELF_GETPHDR), ofl->ofl_name); 736 return (S_ERROR); 737 } 738 739 /* 740 * Reinitialize the section descriptors, section headers and obtain new 741 * output data buffer pointers (these will be used to perform any 742 * relocations). 743 */ 744 for (LIST_TRAVERSE(&ofl->ofl_segs, lnp1, sgp)) { 745 Phdr *_phdr = &(sgp->sg_phdr); 746 Os_desc *osp; 747 Aliste idx; 748 Boolean recorded = FALSE; 749 750 for (APLIST_TRAVERSE(sgp->sg_osdescs, idx, osp)) { 751 /* 752 * Make sure that an output section was originally 753 * created. Input sections that had been marked as 754 * discarded may have made an output section 755 * unnecessary. Remove this alist entry so that 756 * future output section descriptor processing doesn't 757 * have to compensate for this empty section. 758 */ 759 if (osp->os_scn == NULL) { 760 aplist_delete(sgp->sg_osdescs, &idx); 761 continue; 762 } 763 764 if ((osp->os_scn = elf_getscn(ofl->ofl_elf, ++ndx)) == 765 NULL) { 766 eprintf(ofl->ofl_lml, ERR_ELF, 767 MSG_INTL(MSG_ELF_GETSCN), ofl->ofl_name, 768 ndx); 769 return (S_ERROR); 770 } 771 if ((osp->os_shdr = elf_getshdr(osp->os_scn)) == 772 NULL) { 773 eprintf(ofl->ofl_lml, ERR_ELF, 774 MSG_INTL(MSG_ELF_GETSHDR), ofl->ofl_name); 775 return (S_ERROR); 776 } 777 if ((fixalign == TRUE) && (sgp->sg_fscn != 0) && 778 (recorded == FALSE)) { 779 Elf_Scn *scn; 780 781 scn = sgp->sg_fscn; 782 if ((fndx = elf_ndxscn(scn)) == SHN_UNDEF) { 783 eprintf(ofl->ofl_lml, ERR_ELF, 784 MSG_INTL(MSG_ELF_NDXSCN), 785 ofl->ofl_name); 786 return (S_ERROR); 787 } 788 if (ndx == fndx) { 789 sgp->sg_fscn = osp->os_scn; 790 recorded = TRUE; 791 } 792 } 793 794 if ((osp->os_outdata = 795 elf_getdata(osp->os_scn, NULL)) == NULL) { 796 eprintf(ofl->ofl_lml, ERR_ELF, 797 MSG_INTL(MSG_ELF_GETDATA), ofl->ofl_name); 798 return (S_ERROR); 799 } 800 801 /* 802 * If this section is part of a loadable segment insure 803 * that the segments alignment is appropriate. 804 */ 805 if (_phdr->p_type == PT_LOAD) { 806 _phdr->p_align = ld_lcm(_phdr->p_align, 807 osp->os_shdr->sh_addralign); 808 } 809 } 810 } 811 return (1); 812 } 813