xref: /titanic_51/usr/src/cmd/fdisk/fdisk.c (revision de710d24d2fae4468e64da999e1d952a247f142c)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (c) 1992, 2010, Oracle and/or its affiliates. All rights reserved.
24  */
25 
26 /*	Copyright (c) 1990, 1991 UNIX System Laboratories, Inc.	*/
27 /*	Copyright (c) 1984, 1986, 1987, 1988, 1989, 1990 AT&T	*/
28 /*	  All Rights Reserved	*/
29 
30 /*	Copyright (c) 1987, 1988 Microsoft Corporation	*/
31 /*	  All Rights Reserved	*/
32 
33 /*
34  * PROGRAM: fdisk(1M)
35  * This program reads the partition table on the specified device and
36  * also reads the drive parameters. The user can perform various
37  * operations from a supplied menu or from the command line. Diagnostic
38  * options are also available.
39  */
40 #include <stdio.h>
41 #include <stdlib.h>
42 #include <string.h>
43 #include <unistd.h>
44 #include <errno.h>
45 #include <fcntl.h>
46 #include <ctype.h>
47 #include <sys/stat.h>
48 #include <sys/types.h>
49 #include <limits.h>
50 #include <sys/param.h>
51 #include <sys/systeminfo.h>
52 #include <sys/efi_partition.h>
53 #include <sys/byteorder.h>
54 #include <sys/systeminfo.h>
55 
56 #include <sys/dktp/fdisk.h>
57 #include <sys/dkio.h>
58 #include <sys/vtoc.h>
59 #ifdef i386
60 #include <sys/tty.h>
61 #include <libfdisk.h>
62 #endif
63 
64 #define	CLR_SCR ""
65 #define	CLR_LIN ""
66 #define	HOME "" \
67 	""
68 #define	Q_LINE ""
69 
70 #ifdef i386
71 #define	W_LINE ""
72 #else
73 #define	W_LINE ""
74 #endif
75 
76 #define	E_LINE ""
77 
78 #ifdef i386
79 #define	M_LINE "" \
80 	""
81 #else
82 #define	M_LINE "" \
83 	""
84 #endif
85 
86 #define	T_LINE ""
87 
88 #define	DEFAULT_PATH	"/dev/rdsk/"
89 
90 /* XXX - should be in fdisk.h, used by sd as well */
91 
92 /*
93  * the MAX values are the maximum usable values for BIOS chs values
94  * The MAX_CYL value of 1022 is the maximum usable value
95  *   the value of 1023 is a fence value,
96  *   indicating no CHS geometry exists for the corresponding LBA value.
97  * HEAD range [ 0 .. MAX_HEAD ], so number of heads is (MAX_HEAD + 1)
98  * SECT range [ 1 .. MAX_SECT ], so number of sectors is (MAX_SECT)
99  */
100 #define	MAX_SECT	(63)
101 #define	MAX_CYL		(1022)
102 #define	MAX_HEAD	(254)
103 
104 #define	DK_MAX_2TB	UINT32_MAX	/* Max # of sectors in 2TB */
105 
106 /* for clear_vtoc() */
107 #define	OLD		0
108 #define	NEW		1
109 
110 /* readvtoc/writevtoc return codes */
111 #define	VTOC_OK		0	/* Good VTOC */
112 #define	VTOC_INVAL	1	/* invalid VTOC */
113 #define	VTOC_NOTSUP	2	/* operation not supported - EFI label */
114 #define	VTOC_RWERR	3	/* couldn't read or write VTOC */
115 
116 /*
117  * Support for fdisk(1M) on the SPARC platform
118  *	In order to convert little endian values to big endian for SPARC,
119  *	byte/short and long values must be swapped.
120  *	These swapping macros will be used to access information in the
121  *	mboot and ipart structures.
122  */
123 
124 #ifdef sparc
125 #define	les(val)	((((val)&0xFF)<<8)|(((val)>>8)&0xFF))
126 #define	lel(val)	(((unsigned)(les((val)&0x0000FFFF))<<16) | \
127 			    (les((unsigned)((val)&0xffff0000)>>16)))
128 #else
129 #define	les(val)	(val)
130 #define	lel(val)	(val)
131 #endif
132 
133 #if defined(_SUNOS_VTOC_16)
134 #define	VTOC_OFFSET	1
135 #elif defined(_SUNOS_VTOC_8)
136 #define	VTOC_OFFSET	0
137 #else
138 #error No VTOC format defined.
139 #endif
140 
141 #ifdef i386
142 #define	FDISK_KB	(1024)
143 #define	FDISK_MB	(FDISK_KB * 1024)
144 #define	FDISK_GB	(FDISK_MB * 1024)
145 #define	TRUE	1
146 
147 #define	FDISK_MAX_VALID_PART_ID	255
148 #define	FDISK_MAX_VALID_PART_NUM_DIGITS	2
149 #define	FDISK_MAX_VALID_PART_ID_DIGITS	3
150 
151 /* Maximum number of digits for a valid partition size */
152 #define	FDISK_MAX_VALID_CYL_NUM_DIGITS	10
153 
154 /* Minimum partition size in cylinders */
155 #define	FDISK_MIN_PART_SIZE	1
156 #endif
157 
158 static char Usage[] = "Usage: fdisk\n"
159 "[ -A id:act:bhead:bsect:bcyl:ehead:esect:ecyl:rsect:numsect ]\n"
160 "[ -b masterboot ]\n"
161 "[ -D id:act:bhead:bsect:bcyl:ehead:esect:ecyl:rsect:numsect ]\n"
162 "[ -F fdisk_file ] [ -h ] [ -o offset ] [ -P fill_patt ] [ -s size ]\n"
163 "[ -S geom_file ] [ [ -v ] -W { creat_fdisk_file | - } ]\n"
164 "[ -w | r | d | n | I | B | E | g | G | R | t | T ] rdevice";
165 
166 static char Usage1[] = "    Partition options:\n"
167 "	-A id:act:bhead:bsect:bcyl:ehead:esect:ecyl:rsect:numsect\n"
168 "		Create a partition with specific attributes:\n"
169 "		id      = system id number (fdisk.h) for the partition type\n"
170 "		act     = active partition flag (0 is off and 128 is on)\n"
171 "		bhead   = beginning head for start of partition\n"
172 "		bsect   = beginning sector for start of partition\n"
173 "		bcyl    = beginning cylinder for start of partition\n"
174 "		ehead   = ending head for end of partition\n"
175 "		esect   = ending sector for end of partition\n"
176 "		ecyl    = ending cylinder for end of partition\n"
177 "		rsect   = sector number from start of disk for\n"
178 "			  start of partition\n"
179 "		numsect = partition size in sectors\n"
180 "	-b master_boot\n"
181 "		Use master_boot as the master boot file.\n"
182 "	-B	Create one Solaris partition that uses the entire disk.\n"
183 "	-E	Create one EFI partition that uses the entire disk.\n"
184 "	-D id:act:bhead:bsect:bcyl:ehead:esect:ecyl:rsect:numsect\n"
185 "		Delete a partition. See attribute definitions for -A.\n"
186 "	-F fdisk_file\n"
187 "		Use fdisk_file to initialize on-line fdisk table.\n"
188 "	-I	Forego device checks. Generate a file image of what would go\n"
189 "		on a disk using the geometry specified with the -S option.\n"
190 "	-n	Do not run in interactive mode.\n"
191 "	-R	Open the disk device as read-only.\n"
192 "	-t	Check and adjust VTOC to be consistent with fdisk table.\n"
193 "		VTOC slices exceeding the partition size will be truncated.\n"
194 "	-T	Check and adjust VTOC to be consistent with fdisk table.\n"
195 "		VTOC slices exceeding the partition size will be removed.\n"
196 "	-W fdisk_file\n"
197 "		Write on-disk table to fdisk_file.\n"
198 "	-W -	Write on-disk table to standard output.\n"
199 "	-v	Display virtual geometry. Must be used with the -W option.\n"
200 "    Diagnostic options:\n"
201 "	-d	Activate debug information about progress.\n"
202 "	-g	Write label geometry to standard output:\n"
203 "		PCYL		number of physical cylinders\n"
204 "		NCYL		number of usable cylinders\n"
205 "		ACYL		number of alternate cylinders\n"
206 "		BCYL		cylinder offset\n"
207 "		NHEADS		number of heads\n"
208 "		NSECTORS	number of sectors per track\n"
209 "		SECTSIZ		size of a sector in bytes\n"
210 "	-G	Write physical geometry to standard output (see -g).\n"
211 "	-h	Issue this verbose help message.\n"
212 "	-o offset\n"
213 "		Block offset from start of disk (default 0). Ignored if\n"
214 "		-P # specified.\n"
215 "	-P fill_patt\n"
216 "		Fill disk with pattern fill_patt. fill_patt can be decimal or\n"
217 "		hexadecimal and is used as number for constant long word\n"
218 "		pattern. If fill_patt is \"#\" then pattern of block #\n"
219 "		for each block. Pattern is put in each block as long words\n"
220 "		and fills each block (see -o and -s).\n"
221 "	-r	Read from a disk to stdout (see -o and -s).\n"
222 "	-s size	Number of blocks on which to perform operation (see -o).\n"
223 "	-S geom_file\n"
224 "		Use geom_file to set the label geometry (see -g).\n"
225 "	-w	Write to a disk from stdin (see -o and -s).";
226 
227 static char Ostr[] = "Other OS";
228 static char Dstr[] = "DOS12";
229 static char D16str[] = "DOS16";
230 static char DDstr[] = "DOS-DATA";
231 static char EDstr[] = "EXT-DOS";
232 static char DBstr[] = "DOS-BIG";
233 static char PCstr[] = "PCIX";
234 static char Ustr[] = "UNIX System";
235 static char SUstr[] = "Solaris";
236 static char SU2str[] = "Solaris2";
237 static char X86str[] = "x86 Boot";
238 static char DIAGstr[] = "Diagnostic";
239 static char IFSstr[] = "IFS: NTFS";
240 static char AIXstr[] = "AIX Boot";
241 static char AIXDstr[] = "AIX Data";
242 static char OS2str[] = "OS/2 Boot";
243 static char WINstr[] = "Win95 FAT32";
244 static char EWINstr[] = "Ext Win95";
245 static char FAT95str[] = "FAT16 LBA";
246 static char EXTLstr[] = "EXT LBA";
247 static char LINUXstr[] = "Linux";
248 static char CPMstr[] = "CP/M";
249 static char NOV2str[] = "Netware 286";
250 static char NOVstr[] = "Netware 3.x+";
251 static char QNXstr[] = "QNX 4.x";
252 static char QNX2str[] = "QNX part 2";
253 static char QNX3str[] = "QNX part 3";
254 static char LINNATstr[] = "Linux native";
255 #ifdef i386
256 static char LINSWAPstr[] = "Linux swap";
257 #endif
258 static char NTFSVOL1str[] = "NT volset 1";
259 static char NTFSVOL2str[] = "NT volset 2";
260 static char BSDstr[] = "BSD OS";
261 static char NEXTSTEPstr[] = "NeXTSTEP";
262 static char BSDIFSstr[] = "BSDI FS";
263 static char BSDISWAPstr[] = "BSDI swap";
264 static char Actvstr[] = "Active";
265 static char EFIstr[] = "EFI";
266 static char NAstr[] = "      ";
267 
268 /* All the user options and flags */
269 static char *Dfltdev;			/* name of fixed disk drive */
270 
271 /* Diagnostic options */
272 static int	io_wrt = 0;		/* write stdin to disk (-w) */
273 static int	io_rd = 0;		/* read disk and write stdout (-r) */
274 static char	*io_fatt;		/* user supplied pattern (-P pattern) */
275 static int	io_patt = 0;		/* write pattern to disk (-P pattern) */
276 static int	io_lgeom = 0;		/* get label geometry (-g) */
277 static int	io_pgeom = 0;		/* get drive physical geometry (-G) */
278 static char	*io_sgeom = 0;		/* set label geometry (-S geom_file) */
279 static int	io_readonly = 0;	/* do not write to disk (-R) */
280 
281 /* The -o offset and -s size options specify the area of the disk on */
282 /* which to perform the particular operation; i.e., -P, -r, or -w. */
283 static off_t	io_offset = 0;		/* offset sector (-o offset) */
284 static off_t	io_size = 0;		/* size in sectors (-s size) */
285 
286 /* Partition table flags */
287 static int	v_flag = 0;		/* virtual geometry-HBA flag (-v) */
288 static int 	stdo_flag = 0;		/* stdout flag (-W -) */
289 static int	io_fdisk = 0;		/* do fdisk operation */
290 static int	io_ifdisk = 0;		/* interactive partition */
291 static int	io_nifdisk = 0;		/* non-interactive partition (-n) */
292 
293 static int	io_adjt = 0;		/* check/adjust VTOC (truncate (-t)) */
294 static int	io_ADJT = 0;		/* check/adjust VTOC (delete (-T)) */
295 static char	*io_ffdisk = 0;		/* input fdisk file name (-F file) */
296 static char	*io_Wfdisk = 0;		/* output fdisk file name (-W file) */
297 static char	*io_Afdisk = 0;		/* add entry to partition table (-A) */
298 static char	*io_Dfdisk = 0;		/* delete entry from part. table (-D) */
299 
300 static char	*io_mboot = 0;		/* master boot record (-b boot_file) */
301 
302 static struct mboot BootCod;		/* buffer for master boot record */
303 
304 static int	io_wholedisk = 0;	/* use whole disk for Solaris (-B) */
305 static int	io_EFIdisk = 0;		/* use whole disk for EFI (-E) */
306 static int	io_debug = 0;		/* activate verbose mode (-d) */
307 static int	io_image = 0;		/* create image using geometry (-I) */
308 
309 static struct mboot *Bootblk;		/* pointer to cut/paste sector zero */
310 static char	*Bootsect;		/* pointer to sector zero buffer */
311 static char	*Nullsect;
312 static struct extvtoc	disk_vtoc;	/* verify VTOC table */
313 static int	vt_inval = 0;
314 static int	no_virtgeom_ioctl = 0;	/* ioctl for virtual geometry failed */
315 static int	no_physgeom_ioctl = 0;	/* ioctl for physical geometry failed */
316 
317 static struct ipart	Table[FD_NUMPART];
318 static struct ipart	Old_Table[FD_NUMPART];
319 static int		skip_verify[FD_NUMPART]; /* special case skip sz chk */
320 
321 /* Disk geometry information */
322 static struct dk_minfo	minfo;
323 static struct dk_geom	disk_geom;
324 
325 static int Dev;			/* fd for open device */
326 
327 static diskaddr_t	dev_capacity;	/* number of blocks on device */
328 static diskaddr_t	chs_capacity;	/* Numcyl_usable * heads * sectors */
329 
330 static int		Numcyl_usable;	/* Number of usable cylinders */
331 					/*  used to limit fdisk to 2TB */
332 
333 /* Physical geometry for the drive */
334 static int	Numcyl;			/* number of cylinders */
335 static int	heads;			/* number of heads */
336 static int	sectors;		/* number of sectors per track */
337 static int	acyl;			/* number of alternate sectors */
338 
339 /* HBA (virtual) geometry for the drive */
340 static int	hba_Numcyl;		/* number of cylinders */
341 static int	hba_heads;		/* number of heads */
342 static int	hba_sectors;		/* number of sectors per track */
343 
344 static int	sectsiz;		/* sector size */
345 
346 /* Load functions for fdisk table modification */
347 #define	LOADFILE	0	/* load fdisk from file */
348 #define	LOADDEL		1	/* delete an fdisk entry */
349 #define	LOADADD		2	/* add an fdisk entry */
350 
351 #define	CBUFLEN 80
352 static char s[CBUFLEN];
353 
354 #ifdef i386
355 /*
356  * Complete list of all the 255 partition types. Some are unknown types
357  * and some entries are known to be unused.
358  *
359  * Courtesy of http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
360  */
361 char *fdisk_part_types[] = {
362 	"Empty",				/* 0 */
363 	"FAT12",				/* 1 */
364 	"XENIX /",				/* 2 */
365 	"XENIX /usr",				/* 3 */
366 	"FAT16 (Upto 32M)",			/* 4 */
367 	"DOS Extended",				/* 5 */
368 	"FAT16 (>32M, HUGEDOS)",		/* 6 */
369 	"IFS: NTFS",				/* 7 */
370 	"AIX Boot/QNX(qny)",			/* 8 */
371 	"AIX Data/QNX(qnz)",			/* 9 */
372 	"OS/2 Boot/Coherent swap",		/* 10 */
373 	"WIN95 FAT32(Upto 2047GB)",		/* 11 */
374 	"WIN95 FAT32(LBA)",			/* 12 */
375 	"Unused",				/* 13 */
376 	"WIN95 FAT16(LBA)",			/* 14 */
377 	"WIN95 Extended(LBA)",			/* 15 */
378 	"OPUS",					/* 16 */
379 	"Hidden FAT12",				/* 17 */
380 	"Diagnostic",				/* 18 */
381 	"Unknown",				/* 19 */
382 	"Hidden FAT16(Upto 32M)",		/* 20 */
383 	"Unknown",				/* 21 */
384 	"Hidden FAT16(>=32M)",			/* 22 */
385 	"Hidden IFS: HPFS",			/* 23 */
386 	"AST SmartSleep Partition",		/* 24 */
387 	"Unused/Willowtech Photon",		/* 25 */
388 	"Unknown",				/* 26 */
389 	"Hidden FAT32",				/* 27 */
390 	"Hidden FAT32(LBA)",			/* 28 */
391 	"Unused",				/* 29 */
392 	"Hidden FAT16(LBA)",			/* 30 */
393 	"Unknown",				/* 31 */
394 	"Unused/OSF1",				/* 32 */
395 	"Reserved/FSo2(Oxygen FS)",		/* 33 */
396 	"Unused/(Oxygen EXT)",			/* 34 */
397 	"Reserved",				/* 35 */
398 	"NEC DOS 3.x",				/* 36 */
399 	"Unknown",				/* 37 */
400 	"Reserved",				/* 38 */
401 	"Unknown",				/* 39 */
402 	"Unknown",				/* 40 */
403 	"Unknown",				/* 41 */
404 	"AtheOS File System",			/* 42 */
405 	"SyllableSecure",			/* 43 */
406 	"Unknown",				/* 44 */
407 	"Unknown",				/* 45 */
408 	"Unknown",				/* 46 */
409 	"Unknown",				/* 47 */
410 	"Unknown",				/* 48 */
411 	"Reserved",				/* 49 */
412 	"NOS",					/* 50 */
413 	"Reserved",				/* 51 */
414 	"Reserved",				/* 52 */
415 	"JFS on OS/2",				/* 53 */
416 	"Reserved",				/* 54 */
417 	"Unknown",				/* 55 */
418 	"THEOS 3.2 2GB",			/* 56 */
419 	"Plan9/THEOS 4",			/* 57 */
420 	"THEOS 4 4GB",				/* 58 */
421 	"THEOS 4 Extended",			/* 59 */
422 	"PartitionMagic Recovery",		/* 60 */
423 	"Hidden NetWare",			/* 61 */
424 	"Unknown",				/* 62 */
425 	"Unknown",				/* 63 */
426 	"Venix 80286",				/* 64 */
427 	"MINIX/PPC PReP Boot",			/* 65 */
428 	"Win2K Dynamic Disk/SFS(DOS)",		/* 66 */
429 	"Linux+DRDOS shared",			/* 67 */
430 	"GoBack partition",			/* 68 */
431 	"Boot-US boot manager",			/* 69 */
432 	"EUMEL/Elan",				/* 70 */
433 	"EUMEL/Elan",				/* 71 */
434 	"EUMEL/Elan",				/* 72 */
435 	"Unknown",				/* 73 */
436 	"ALFS/THIN FS for DOS",			/* 74 */
437 	"Unknown",				/* 75 */
438 	"Oberon partition",			/* 76 */
439 	"QNX 4,x",				/* 77 */
440 	"QNX 4,x 2nd Part",			/* 78 */
441 	"QNX 4,x 3rd Part",			/* 79 */
442 	"OnTrack DM R/O, Lynx RTOS",		/* 80 */
443 	"OnTrack DM R/W, Novell",		/* 81 */
444 	"CP/M",					/* 82 */
445 	"Disk Manager 6.0 Aux3",		/* 83 */
446 	"Disk Manager 6.0 DDO",			/* 84 */
447 	"EZ-Drive",				/* 85 */
448 	"Golden Bow VFeature/AT&T MS-DOS",	/* 86 */
449 	"DrivePro",				/* 87 */
450 	"Unknown",				/* 88 */
451 	"Unknown",				/* 89 */
452 	"Unknown",				/* 90 */
453 	"Unknown",				/* 91 */
454 	"Priam EDisk",				/* 92 */
455 	"Unknown",				/* 93 */
456 	"Unknown",				/* 94 */
457 	"Unknown",				/* 95 */
458 	"Unknown",				/* 96 */
459 	"SpeedStor",				/* 97 */
460 	"Unknown",				/* 98 */
461 	"Unix SysV, Mach, GNU Hurd",		/* 99 */
462 	"PC-ARMOUR, Netware 286",		/* 100 */
463 	"Netware 386",				/* 101 */
464 	"Netware SMS",				/* 102 */
465 	"Novell",				/* 103 */
466 	"Novell",				/* 104 */
467 	"Netware NSS",				/* 105 */
468 	"Unknown",				/* 106 */
469 	"Unknown",				/* 107 */
470 	"Unknown",				/* 108 */
471 	"Unknown",				/* 109 */
472 	"Unknown",				/* 110 */
473 	"Unknown",				/* 111 */
474 	"DiskSecure Multi-Boot",		/* 112 */
475 	"Reserved",				/* 113 */
476 	"Unknown",				/* 114 */
477 	"Reserved",				/* 115 */
478 	"Scramdisk partition",			/* 116 */
479 	"IBM PC/IX",				/* 117 */
480 	"Reserved",				/* 118 */
481 	"M2FS/M2CS,Netware VNDI",		/* 119 */
482 	"XOSL FS",				/* 120 */
483 	"Unknown",				/* 121 */
484 	"Unknown",				/* 122 */
485 	"Unknown",				/* 123 */
486 	"Unknown",				/* 124 */
487 	"Unknown",				/* 125 */
488 	"Unused",				/* 126 */
489 	"Unused",				/* 127 */
490 	"MINIX until 1.4a",			/* 128 */
491 	"MINIX since 1.4b, early Linux",	/* 129 */
492 	"Solaris/Linux swap",			/* 130 */
493 	"Linux native",				/* 131 */
494 	"OS/2 hidden,Win Hibernation",		/* 132 */
495 	"Linux extended",			/* 133 */
496 	"Old Linux RAID,NT FAT16 RAID",		/* 134 */
497 	"NTFS volume set",			/* 135 */
498 	"Linux plaintext part table",		/* 136 */
499 	"Unknown",				/* 137 */
500 	"Linux Kernel Partition",		/* 138 */
501 	"Fault Tolerant FAT32 volume",		/* 139 */
502 	"Fault Tolerant FAT32 volume",		/* 140 */
503 	"Free FDISK hidden PDOS FAT12",		/* 141 */
504 	"Linux LVM partition",			/* 142 */
505 	"Unknown",				/* 143 */
506 	"Free FDISK hidden PDOS FAT16",		/* 144 */
507 	"Free FDISK hidden DOS EXT",		/* 145 */
508 	"Free FDISK hidden FAT16 Large",	/* 146 */
509 	"Hidden Linux native, Amoeba",		/* 147 */
510 	"Amoeba Bad Block Table",		/* 148 */
511 	"MIT EXOPC Native",			/* 149 */
512 	"Unknown",				/* 150 */
513 	"Free FDISK hidden PDOS FAT32",		/* 151 */
514 	"Free FDISK hidden FAT32 LBA",		/* 152 */
515 	"DCE376 logical drive",			/* 153 */
516 	"Free FDISK hidden FAT16 LBA",		/* 154 */
517 	"Free FDISK hidden DOS EXT",		/* 155 */
518 	"Unknown",				/* 156 */
519 	"Unknown",				/* 157 */
520 	"Unknown",				/* 158 */
521 	"BSD/OS",				/* 159 */
522 	"Laptop hibernation",			/* 160 */
523 	"Laptop hibernate,HP SpeedStor",	/* 161 */
524 	"Unknown",				/* 162 */
525 	"HP SpeedStor",				/* 163 */
526 	"HP SpeedStor",				/* 164 */
527 	"BSD/386,386BSD,NetBSD,FreeBSD",	/* 165 */
528 	"OpenBSD,HP SpeedStor",			/* 166 */
529 	"NeXTStep",				/* 167 */
530 	"Mac OS-X",				/* 168 */
531 	"NetBSD",				/* 169 */
532 	"Olivetti FAT12 1.44MB Service",	/* 170 */
533 	"Mac OS-X Boot",			/* 171 */
534 	"Unknown",				/* 172 */
535 	"Unknown",				/* 173 */
536 	"ShagOS filesystem",			/* 174 */
537 	"ShagOS swap",				/* 175 */
538 	"BootStar Dummy",			/* 176 */
539 	"HP SpeedStor",				/* 177 */
540 	"Unknown",				/* 178 */
541 	"HP SpeedStor",				/* 179 */
542 	"HP SpeedStor",				/* 180 */
543 	"Unknown",				/* 181 */
544 	"Corrupted FAT16 NT Mirror Set",	/* 182 */
545 	"Corrupted NTFS NT Mirror Set",		/* 183 */
546 	"Old BSDI BSD/386 swap",		/* 184 */
547 	"Unknown",				/* 185 */
548 	"Unknown",				/* 186 */
549 	"Boot Wizard hidden",			/* 187 */
550 	"Unknown",				/* 188 */
551 	"Unknown",				/* 189 */
552 	"Solaris x86 boot",			/* 190 */
553 	"Solaris2",				/* 191 */
554 	"REAL/32 or Novell DOS secured",	/* 192 */
555 	"DRDOS/secured(FAT12)",			/* 193 */
556 	"Hidden Linux",				/* 194 */
557 	"Hidden Linux swap",			/* 195 */
558 	"DRDOS/secured(FAT16,< 32M)",		/* 196 */
559 	"DRDOS/secured(Extended)",		/* 197 */
560 	"NT corrupted FAT16 volume",		/* 198 */
561 	"NT corrupted NTFS volume",		/* 199 */
562 	"DRDOS8.0+",				/* 200 */
563 	"DRDOS8.0+",				/* 201 */
564 	"DRDOS8.0+",				/* 202 */
565 	"DRDOS7.04+ secured FAT32(CHS)",	/* 203 */
566 	"DRDOS7.04+ secured FAT32(LBA)",	/* 204 */
567 	"CTOS Memdump",				/* 205 */
568 	"DRDOS7.04+ FAT16X(LBA)",		/* 206 */
569 	"DRDOS7.04+ secure EXT DOS(LBA)",	/* 207 */
570 	"REAL/32 secure big, MDOS",		/* 208 */
571 	"Old MDOS secure FAT12",		/* 209 */
572 	"Unknown",				/* 210 */
573 	"Unknown",				/* 211 */
574 	"Old MDOS secure FAT16 <32M",		/* 212 */
575 	"Old MDOS secure EXT",			/* 213 */
576 	"Old MDOS secure FAT16 >=32M",		/* 214 */
577 	"Unknown",				/* 215 */
578 	"CP/M-86",				/* 216 */
579 	"Unknown",				/* 217 */
580 	"Non-FS Data",				/* 218 */
581 	"CP/M,Concurrent DOS,CTOS",		/* 219 */
582 	"Unknown",				/* 220 */
583 	"Hidden CTOS memdump",			/* 221 */
584 	"Dell PowerEdge utilities(FAT)",	/* 222 */
585 	"DG/UX virtual disk manager",		/* 223 */
586 	"ST AVFS(STMicroelectronics)",		/* 224 */
587 	"SpeedStor 12-bit FAT EXT",		/* 225 */
588 	"Unknown",				/* 226 */
589 	"SpeedStor",				/* 227 */
590 	"SpeedStor 16-bit FAT EXT",		/* 228 */
591 	"Tandy MSDOS",				/* 229 */
592 	"Storage Dimensions SpeedStor",		/* 230 */
593 	"Unknown",				/* 231 */
594 	"Unknown",				/* 232 */
595 	"Unknown",				/* 233 */
596 	"Unknown",				/* 234 */
597 	"BeOS BFS",				/* 235 */
598 	"SkyOS SkyFS",				/* 236 */
599 	"Unused",				/* 237 */
600 	"EFI Header Indicator",			/* 238 */
601 	"EFI Filesystem",			/* 239 */
602 	"Linux/PA-RISC boot loader",		/* 240 */
603 	"SpeedStor",				/* 241 */
604 	"DOS 3.3+ secondary",			/* 242 */
605 	"SpeedStor Reserved",			/* 243 */
606 	"SpeedStor Large",			/* 244 */
607 	"Prologue multi-volume",		/* 245 */
608 	"SpeedStor",				/* 246 */
609 	"Unused",				/* 247 */
610 	"Unknown",				/* 248 */
611 	"pCache",				/* 249 */
612 	"Bochs",				/* 250 */
613 	"VMware File System",			/* 251 */
614 	"VMware swap",				/* 252 */
615 	"Linux raid autodetect",		/* 253 */
616 	"NT Disk Administrator hidden",		/* 254 */
617 	"Xenix Bad Block Table"			/* 255 */
618 };
619 
620 /* Allowed extended partition menu options */
621 static char ext_part_menu_opts[] = "adhipr";
622 
623 /*
624  * Structure holding all information about the extended partition
625  * NOTE : As of now, there will be just one instance of ext_part_t, since most
626  * known systems allow only one extended dos partition per disk.
627  */
628 static ext_part_t *epp;
629 #endif
630 
631 static void update_disk_and_exit(boolean_t table_changed);
632 int main(int argc, char *argv[]);
633 static int read_geom(char *sgeom);
634 static void dev_mboot_read(void);
635 static void dev_mboot_write(off_t sect, char *buff, int bootsiz);
636 static void mboot_read(void);
637 static void fill_patt(void);
638 static void abs_read(void);
639 static void abs_write(void);
640 static void load(int funct, char *file);
641 static void Set_Table_CHS_Values(int ti);
642 static int nopartdefined();
643 static int insert_tbl(int id, int act,
644     int bhead, int bsect, int bcyl,
645     int ehead, int esect, int ecyl,
646     uint32_t rsect, uint32_t numsect, int startindex);
647 static int entry_from_old_table(int id, int act,
648     int bhead, int bsect, int bcyl,
649     int ehead, int esect, int ecyl,
650     uint32_t rsect, uint32_t numsect, int startindex);
651 static int verify_tbl(void);
652 static int pars_fdisk(char *line,
653     int *id, int *act,
654     int *bhead, int *bsect, int *bcyl,
655     int *ehead, int *esect, int *ecyl,
656     uint32_t *rsect, uint32_t *numsect);
657 static int validate_part(int id, uint32_t rsect, uint32_t numsect);
658 static void stage0(void);
659 static int pcreate(void);
660 static int specify(uchar_t tsystid);
661 static void dispmenu(void);
662 static int pchange(void);
663 static int ppartid(void);
664 static char pdelete(void);
665 static void rm_blanks(char *s);
666 static int getcyl(void);
667 static void disptbl(void);
668 static void print_Table(void);
669 static void copy_Table_to_Old_Table(void);
670 static void nulltbl(void);
671 static void copy_Bootblk_to_Table(void);
672 static void fill_ipart(char *bootptr, struct ipart *partp);
673 #ifdef sparc
674 uchar_t getbyte(char **bp);
675 uint32_t getlong(char **bp);
676 #endif
677 static void copy_Table_to_Bootblk(void);
678 static int TableChanged(void);
679 static void ffile_write(char *file);
680 static void fix_slice(void);
681 static int yesno(void);
682 static int readvtoc(void);
683 static int writevtoc(void);
684 static int efi_ioctl(int fd, int cmd, dk_efi_t *dk_ioc);
685 static int clear_efi(void);
686 static void clear_vtoc(int table, int part);
687 static int lecture_and_query(char *warning, char *devname);
688 static void sanity_check_provided_device(char *devname, int fd);
689 static char *get_node(char *devname);
690 
691 #ifdef i386
692 static void id_to_name(uchar_t sysid, char *buffer);
693 static void ext_read_input(char *buf);
694 static int ext_read_options(char *buf);
695 static int ext_invalid_option(char ch);
696 static void ext_read_valid_part_num(int *pno);
697 static void ext_read_valid_part_id(uchar_t *partid);
698 static int ext_read_valid_partition_start(uint32_t *begsec);
699 static void ext_read_valid_partition_size(uint32_t begsec, uint32_t *endsec);
700 static void ext_part_menu();
701 static void add_logical_drive();
702 static void delete_logical_drive();
703 static void ext_print_help_menu();
704 static void ext_change_logical_drive_id();
705 static void ext_print_part_types();
706 static void ext_print_logical_drive_layout();
707 static void preach_and_continue();
708 #ifdef DEBUG
709 static void ext_print_logdrive_layout_debug();
710 #endif	/* DEBUG */
711 #endif	/* i386 */
712 
713 /*
714  * This function is called only during the non-interactive mode.
715  * It is touchy and does not tolerate any errors. If there are
716  * mounted logical drives, changes to the partition table
717  * is disallowed.
718  */
719 static void
720 update_disk_and_exit(boolean_t table_changed)
721 {
722 #ifdef i386
723 	int rval;
724 #endif
725 	if (table_changed) {
726 		/*
727 		 * Copy the new table back to the sector buffer
728 		 * and write it to disk
729 		 */
730 		copy_Table_to_Bootblk();
731 		dev_mboot_write(0, Bootsect, sectsiz);
732 	}
733 
734 	/* If the VTOC table is wrong fix it (truncation only) */
735 	if (io_adjt)
736 		fix_slice();
737 
738 #ifdef i386
739 	if (!io_readonly) {
740 		rval = fdisk_commit_ext_part(epp);
741 		switch (rval) {
742 			case FDISK_SUCCESS:
743 				/* Success */
744 				break;
745 			case FDISK_ENOEXTPART:
746 				/* Nothing to do */
747 				break;
748 			default:
749 				(void) fprintf(stderr, "Error in"
750 				    " fdisk_commit_ext_part\n");
751 				exit(rval);
752 		}
753 	}
754 	libfdisk_fini(&epp);
755 #endif
756 	exit(0);
757 }
758 
759 /*
760  * main
761  * Process command-line options.
762  */
763 int
764 main(int argc, char *argv[])
765 {
766 	int c, i;
767 	extern	int optind;
768 	extern	char *optarg;
769 	int	errflg = 0;
770 	int	diag_cnt = 0;
771 	int openmode;
772 #ifdef i386
773 	int rval;
774 	int lf_op_flag = 0;
775 #endif
776 
777 	setbuf(stderr, 0);	/* so all output gets out on exit */
778 	setbuf(stdout, 0);
779 
780 	/* Process the options. */
781 	while ((c = getopt(argc, argv, "o:s:P:F:b:A:D:W:S:tTIhwvrndgGRBE"))
782 	    != EOF) {
783 		switch (c) {
784 
785 			case 'o':
786 				io_offset = (off_t)strtoull(optarg, 0, 0);
787 				continue;
788 			case 's':
789 				io_size = (off_t)strtoull(optarg, 0, 0);
790 				continue;
791 			case 'P':
792 				diag_cnt++;
793 				io_patt++;
794 				io_fatt = optarg;
795 				continue;
796 			case 'w':
797 				diag_cnt++;
798 				io_wrt++;
799 				continue;
800 			case 'r':
801 				diag_cnt++;
802 				io_rd++;
803 				continue;
804 			case 'd':
805 				io_debug++;
806 				continue;
807 			case 'I':
808 				io_image++;
809 				continue;
810 			case 'R':
811 				io_readonly++;
812 				continue;
813 			case 'S':
814 				diag_cnt++;
815 				io_sgeom = optarg;
816 				continue;
817 			case 'T':
818 				io_ADJT++;
819 				/* FALLTHRU */
820 			case 't':
821 				io_adjt++;
822 				continue;
823 			case 'B':
824 				io_wholedisk++;
825 				io_fdisk++;
826 				continue;
827 			case 'E':
828 				io_EFIdisk++;
829 				io_fdisk++;
830 				continue;
831 			case 'g':
832 				diag_cnt++;
833 				io_lgeom++;
834 				continue;
835 			case 'G':
836 				diag_cnt++;
837 				io_pgeom++;
838 				continue;
839 			case 'n':
840 				io_nifdisk++;
841 				io_fdisk++;
842 				continue;
843 			case 'F':
844 				io_fdisk++;
845 				io_ffdisk = optarg;
846 				continue;
847 			case 'b':
848 				io_mboot = optarg;
849 				continue;
850 			case 'W':
851 				/*
852 				 * If '-' is the -W argument, then write
853 				 * to standard output, otherwise write
854 				 * to the specified file.
855 				 */
856 				if (strncmp(optarg, "-", 1) == 0)
857 					stdo_flag = 1;
858 				else
859 					io_Wfdisk = optarg;
860 				io_fdisk++;
861 				continue;
862 			case 'A':
863 				io_fdisk++;
864 				io_Afdisk = optarg;
865 				continue;
866 			case 'D':
867 				io_fdisk++;
868 				io_Dfdisk = optarg;
869 				continue;
870 			case 'h':
871 				(void) fprintf(stderr, "%s\n", Usage);
872 				(void) fprintf(stderr, "%s\n", Usage1);
873 				exit(0);
874 				/* FALLTHRU */
875 			case 'v':
876 				v_flag = 1;
877 				continue;
878 			case '?':
879 				errflg++;
880 				break;
881 		}
882 		break;
883 	}
884 
885 	if (io_image && io_sgeom && diag_cnt == 1) {
886 		diag_cnt = 0;
887 	}
888 
889 	/* User option checking */
890 
891 	/* By default, run in interactive mode */
892 	if (!io_fdisk && !diag_cnt && !io_nifdisk) {
893 		io_ifdisk++;
894 		io_fdisk++;
895 	}
896 	if (((io_fdisk || io_adjt) && diag_cnt) || (diag_cnt > 1)) {
897 		errflg++;
898 	}
899 
900 	/* Was any error detected? */
901 	if (errflg || argc == optind) {
902 		(void) fprintf(stderr, "%s\n", Usage);
903 		(void) fprintf(stderr,
904 		    "\nDetailed help is available with the -h option.\n");
905 		exit(2);
906 	}
907 
908 
909 	/* Figure out the correct device node to open */
910 	Dfltdev = get_node(argv[optind]);
911 
912 	if (io_readonly)
913 		openmode = O_RDONLY;
914 	else
915 		openmode = O_RDWR|O_CREAT;
916 
917 	if ((Dev = open(Dfltdev, openmode, 0666)) == -1) {
918 		(void) fprintf(stderr,
919 		    "fdisk: Cannot open device %s.\n",
920 		    Dfltdev);
921 		exit(1);
922 	}
923 	/*
924 	 * not all disk (or disklike) drivers support DKIOCGMEDIAINFO
925 	 * in that case leave the minfo structure zeroed
926 	 */
927 	if (ioctl(Dev, DKIOCGMEDIAINFO, &minfo)) {
928 		(void) memset(&minfo, 0, sizeof (minfo));
929 	}
930 
931 	/* Get the disk geometry */
932 	if (!io_image) {
933 		/* Get disk's HBA (virtual) geometry */
934 		errno = 0;
935 		if (ioctl(Dev, DKIOCG_VIRTGEOM, &disk_geom)) {
936 
937 			/*
938 			 * If ioctl isn't implemented on this platform, then
939 			 * turn off flag to print out virtual geometry (-v),
940 			 * otherwise use the virtual geometry.
941 			 */
942 
943 			if (errno == ENOTTY) {
944 				v_flag = 0;
945 				no_virtgeom_ioctl = 1;
946 			} else if (errno == EINVAL) {
947 				/*
948 				 * This means that the ioctl exists, but
949 				 * is invalid for this disk, meaning the
950 				 * disk doesn't have an HBA geometry
951 				 * (like, say, it's larger than 8GB).
952 				 */
953 				v_flag = 0;
954 				hba_Numcyl = hba_heads = hba_sectors = 0;
955 			} else {
956 				(void) fprintf(stderr,
957 				    "%s: Cannot get virtual disk geometry.\n",
958 				    argv[optind]);
959 				exit(1);
960 			}
961 		} else {
962 			/* save virtual geometry values obtained by ioctl */
963 			hba_Numcyl = disk_geom.dkg_ncyl;
964 			hba_heads = disk_geom.dkg_nhead;
965 			hba_sectors = disk_geom.dkg_nsect;
966 		}
967 
968 		errno = 0;
969 		if (ioctl(Dev, DKIOCG_PHYGEOM, &disk_geom)) {
970 			if (errno == ENOTTY) {
971 				no_physgeom_ioctl = 1;
972 			} else {
973 				(void) fprintf(stderr,
974 				    "%s: Cannot get physical disk geometry.\n",
975 				    argv[optind]);
976 				exit(1);
977 			}
978 
979 		}
980 		/*
981 		 * Call DKIOCGGEOM if the ioctls for physical and virtual
982 		 * geometry fail. Get both from this generic call.
983 		 */
984 		if (no_virtgeom_ioctl && no_physgeom_ioctl) {
985 			errno = 0;
986 			if (ioctl(Dev, DKIOCGGEOM, &disk_geom)) {
987 				(void) fprintf(stderr,
988 				    "%s: Cannot get disk label geometry.\n",
989 				    argv[optind]);
990 				exit(1);
991 			}
992 		}
993 
994 		Numcyl = disk_geom.dkg_ncyl;
995 		heads = disk_geom.dkg_nhead;
996 		sectors = disk_geom.dkg_nsect;
997 
998 		if (minfo.dki_lbsize != 0)
999 			sectsiz = minfo.dki_lbsize;
1000 		else
1001 			sectsiz = 512;
1002 
1003 		acyl = disk_geom.dkg_acyl;
1004 
1005 		/*
1006 		 * if hba geometry was not set by DKIOC_VIRTGEOM
1007 		 * or we got an invalid hba geometry
1008 		 * then set hba geometry based on max values
1009 		 */
1010 		if (no_virtgeom_ioctl ||
1011 		    disk_geom.dkg_ncyl == 0 ||
1012 		    disk_geom.dkg_nhead == 0 ||
1013 		    disk_geom.dkg_nsect == 0 ||
1014 		    disk_geom.dkg_ncyl > MAX_CYL ||
1015 		    disk_geom.dkg_nhead > MAX_HEAD ||
1016 		    disk_geom.dkg_nsect > MAX_SECT) {
1017 
1018 			/*
1019 			 * turn off flag to print out virtual geometry (-v)
1020 			 */
1021 			v_flag = 0;
1022 			hba_sectors	= MAX_SECT;
1023 			hba_heads	= MAX_HEAD + 1;
1024 			hba_Numcyl	= (Numcyl * heads * sectors) /
1025 			    (hba_sectors * hba_heads);
1026 		}
1027 
1028 		if (io_debug) {
1029 			(void) fprintf(stderr, "Physical Geometry:\n");
1030 			(void) fprintf(stderr,
1031 			    "  cylinders[%d] heads[%d] sectors[%d]\n"
1032 			    "  sector size[%d] blocks[%d] mbytes[%d]\n",
1033 			    Numcyl,
1034 			    heads,
1035 			    sectors,
1036 			    sectsiz,
1037 			    Numcyl * heads * sectors,
1038 			    (Numcyl * heads * sectors * sectsiz) / 1048576);
1039 			(void) fprintf(stderr, "Virtual (HBA) Geometry:\n");
1040 			(void) fprintf(stderr,
1041 			    "  cylinders[%d] heads[%d] sectors[%d]\n"
1042 			    "  sector size[%d] blocks[%d] mbytes[%d]\n",
1043 			    hba_Numcyl,
1044 			    hba_heads,
1045 			    hba_sectors,
1046 			    sectsiz,
1047 			    hba_Numcyl * hba_heads * hba_sectors,
1048 			    (hba_Numcyl * hba_heads * hba_sectors * sectsiz) /
1049 			    1048576);
1050 		}
1051 	}
1052 
1053 	/* If user has requested a geometry report just do it and exit */
1054 	if (io_lgeom) {
1055 		if (ioctl(Dev, DKIOCGGEOM, &disk_geom)) {
1056 			(void) fprintf(stderr,
1057 			    "%s: Cannot get disk label geometry.\n",
1058 			    argv[optind]);
1059 			exit(1);
1060 		}
1061 		Numcyl = disk_geom.dkg_ncyl;
1062 		heads = disk_geom.dkg_nhead;
1063 		sectors = disk_geom.dkg_nsect;
1064 		if (minfo.dki_lbsize != 0)
1065 			sectsiz = minfo.dki_lbsize;
1066 		else
1067 			sectsiz = 512;
1068 
1069 		acyl = disk_geom.dkg_acyl;
1070 		(void) printf("* Label geometry for device %s\n", Dfltdev);
1071 		(void) printf(
1072 		    "* PCYL     NCYL     ACYL     BCYL     NHEAD NSECT"
1073 		    " SECSIZ\n");
1074 		(void) printf("  %-8d %-8d %-8d %-8d %-5d %-5d %-6d\n",
1075 		    Numcyl,
1076 		    disk_geom.dkg_ncyl,
1077 		    disk_geom.dkg_acyl,
1078 		    disk_geom.dkg_bcyl,
1079 		    heads,
1080 		    sectors,
1081 		    sectsiz);
1082 		exit(0);
1083 	} else if (io_pgeom) {
1084 		if (ioctl(Dev, DKIOCG_PHYGEOM, &disk_geom)) {
1085 			(void) fprintf(stderr,
1086 			    "%s: Cannot get physical disk geometry.\n",
1087 			    argv[optind]);
1088 			exit(1);
1089 		}
1090 		(void) printf("* Physical geometry for device %s\n", Dfltdev);
1091 		(void) printf(
1092 		    "* PCYL     NCYL     ACYL     BCYL     NHEAD NSECT"
1093 		    " SECSIZ\n");
1094 		(void) printf("  %-8d %-8d %-8d %-8d %-5d %-5d %-6d\n",
1095 		    disk_geom.dkg_pcyl,
1096 		    disk_geom.dkg_ncyl,
1097 		    disk_geom.dkg_acyl,
1098 		    disk_geom.dkg_bcyl,
1099 		    disk_geom.dkg_nhead,
1100 		    disk_geom.dkg_nsect,
1101 		    sectsiz);
1102 		exit(0);
1103 	} else if (io_sgeom) {
1104 		if (read_geom(io_sgeom)) {
1105 			exit(1);
1106 		} else if (!io_image) {
1107 			exit(0);
1108 		}
1109 	}
1110 
1111 	/*
1112 	 * some drivers may not support DKIOCGMEDIAINFO
1113 	 * in that case use CHS
1114 	 */
1115 	chs_capacity = (diskaddr_t)Numcyl * heads * sectors;
1116 	dev_capacity = chs_capacity;
1117 	Numcyl_usable = Numcyl;
1118 
1119 	if (chs_capacity > DK_MAX_2TB) {
1120 		/* limit to 2TB */
1121 		Numcyl_usable = DK_MAX_2TB / (heads * sectors);
1122 		chs_capacity = (diskaddr_t)Numcyl_usable * heads * sectors;
1123 	}
1124 
1125 	if (minfo.dki_capacity > 0)
1126 		dev_capacity = minfo.dki_capacity;
1127 
1128 	/* Allocate memory to hold three complete sectors */
1129 	Bootsect = (char *)calloc(3 * sectsiz, 1);
1130 	if (Bootsect == NULL) {
1131 		(void) fprintf(stderr,
1132 		    "fdisk: Unable to obtain enough buffer memory"
1133 		    " (%d bytes).\n",
1134 		    3 * sectsiz);
1135 		exit(1);
1136 	}
1137 
1138 	Nullsect = Bootsect + sectsiz;
1139 	/* Zero out the "NULL" sector */
1140 	for (i = 0; i < sectsiz; i++) {
1141 		Nullsect[i] = 0;
1142 	}
1143 
1144 	/* Find out what the user wants done */
1145 	if (io_rd) {		/* abs disk read */
1146 		abs_read();	/* will not return */
1147 	} else if (io_wrt && !io_readonly) {
1148 		abs_write();	/* will not return */
1149 	} else if (io_patt && !io_readonly) {
1150 		fill_patt();	/* will not return */
1151 	}
1152 
1153 
1154 	/* This is the fdisk edit, the real reason for the program.	*/
1155 
1156 	sanity_check_provided_device(Dfltdev, Dev);
1157 
1158 	/* Get the new BOOT program in case we write a new fdisk table */
1159 	mboot_read();
1160 
1161 	/* Read from disk master boot */
1162 	dev_mboot_read();
1163 
1164 	/*
1165 	 * Verify and copy the device's fdisk table. This will be used
1166 	 * as the prototype mboot if the device's mboot looks invalid.
1167 	 */
1168 	Bootblk = (struct mboot *)Bootsect;
1169 	copy_Bootblk_to_Table();
1170 
1171 	/* save away a copy of Table in Old_Table for sensing changes */
1172 	copy_Table_to_Old_Table();
1173 
1174 #ifdef i386
1175 	/*
1176 	 * Read extended partition only when the fdisk table is not
1177 	 * supplied from a file
1178 	 */
1179 	if (!io_ffdisk) {
1180 		lf_op_flag |= FDISK_READ_DISK;
1181 	}
1182 	if ((rval = libfdisk_init(&epp, Dfltdev, &Table[0], lf_op_flag))
1183 	    != FDISK_SUCCESS) {
1184 		switch (rval) {
1185 			/*
1186 			 * FDISK_EBADLOGDRIVE, FDISK_ENOLOGDRIVE and
1187 			 * FDISK_EBADMAGIC can be considered as
1188 			 * soft errors and hence we do not exit
1189 			 */
1190 			case FDISK_EBADLOGDRIVE:
1191 				break;
1192 			case FDISK_ENOLOGDRIVE:
1193 				break;
1194 			case FDISK_EBADMAGIC:
1195 				break;
1196 			case FDISK_ENOVGEOM:
1197 				(void) fprintf(stderr, "Could not get virtual"
1198 				    " geometry for this device\n");
1199 				exit(1);
1200 				break;
1201 			case FDISK_ENOPGEOM:
1202 				(void) fprintf(stderr, "Could not get physical"
1203 				    " geometry for this device\n");
1204 				exit(1);
1205 				break;
1206 			case FDISK_ENOLGEOM:
1207 				(void) fprintf(stderr, "Could not get label"
1208 				    " geometry for this device\n");
1209 				exit(1);
1210 				break;
1211 			default:
1212 				perror("Failed to initialise libfdisk.\n");
1213 				exit(1);
1214 				break;
1215 		}
1216 	}
1217 #endif
1218 
1219 	/* Load fdisk table from specified file (-F fdisk_file) */
1220 	if (io_ffdisk) {
1221 		/* Load and verify user-specified table parameters */
1222 		load(LOADFILE, io_ffdisk);
1223 	}
1224 
1225 	/* Does user want to delete or add an entry? */
1226 	if (io_Dfdisk) {
1227 		load(LOADDEL, io_Dfdisk);
1228 	}
1229 	if (io_Afdisk) {
1230 		load(LOADADD, io_Afdisk);
1231 	}
1232 
1233 	if (!io_ffdisk && !io_Afdisk && !io_Dfdisk) {
1234 		/* Check if there is no fdisk table */
1235 		if (nopartdefined() || io_wholedisk || io_EFIdisk) {
1236 			if (io_ifdisk && !io_wholedisk && !io_EFIdisk) {
1237 				(void) printf(
1238 				    "No fdisk table exists. The default"
1239 				    " partition for the disk is:\n\n"
1240 				    "  a 100%% \"SOLARIS System\" "
1241 				    "partition\n\n"
1242 				    "Type \"y\" to accept the default "
1243 				    "partition,  otherwise type \"n\" to "
1244 				    "edit the\n partition table.\n");
1245 
1246 				if (Numcyl > Numcyl_usable)
1247 					(void) printf("WARNING: Disk is larger"
1248 					    " than 2TB. Solaris partition will"
1249 					    " be limited to 2 TB.\n");
1250 			}
1251 
1252 			/* Edit the partition table as directed */
1253 			if (io_wholedisk ||(io_ifdisk && yesno())) {
1254 
1255 				/* Default scenario */
1256 				nulltbl();
1257 				/* now set up UNIX System partition */
1258 				Table[0].bootid = ACTIVE;
1259 				Table[0].relsect = LE_32(heads * sectors);
1260 
1261 				Table[0].numsect =
1262 				    LE_32((ulong_t)((Numcyl_usable - 1) *
1263 				    heads * sectors));
1264 
1265 				Table[0].systid = SUNIXOS2;   /* Solaris */
1266 
1267 				/* calculate CHS values for table entry 0 */
1268 				Set_Table_CHS_Values(0);
1269 				update_disk_and_exit(B_TRUE);
1270 			} else if (io_EFIdisk) {
1271 				/* create an EFI partition for the whole disk */
1272 				nulltbl();
1273 				i = insert_tbl(EFI_PMBR, 0, 0, 0, 0, 0, 0, 0, 1,
1274 				    (dev_capacity > DK_MAX_2TB) ? DK_MAX_2TB :
1275 				    (dev_capacity - 1), 0);
1276 				if (i != 0) {
1277 					(void) fprintf(stderr,
1278 					    "Error creating EFI partition\n");
1279 					exit(1);
1280 				}
1281 				update_disk_and_exit(B_TRUE);
1282 			}
1283 		}
1284 	}
1285 
1286 	/* Display complete fdisk table entries for debugging purposes */
1287 	if (io_debug) {
1288 		(void) fprintf(stderr, "Partition Table Entry Values:\n");
1289 		print_Table();
1290 		if (io_ifdisk) {
1291 			(void) fprintf(stderr, "\n");
1292 			(void) fprintf(stderr, "Press Enter to continue.\n");
1293 			(void) fgets(s, sizeof (s), stdin);
1294 		}
1295 	}
1296 
1297 	/* Interactive fdisk mode */
1298 	if (io_ifdisk) {
1299 		(void) printf(CLR_SCR);
1300 		disptbl();
1301 		for (;;) {
1302 			stage0();
1303 			copy_Bootblk_to_Table();
1304 			disptbl();
1305 		}
1306 	}
1307 
1308 	/* If user wants to write the table to a file, do it */
1309 	if (io_Wfdisk)
1310 		ffile_write(io_Wfdisk);
1311 	else if (stdo_flag)
1312 		ffile_write((char *)stdout);
1313 
1314 	update_disk_and_exit(TableChanged() == 1);
1315 	return (0);
1316 }
1317 
1318 /*
1319  * read_geom
1320  * Read geometry from specified file (-S).
1321  */
1322 
1323 static int
1324 read_geom(char *sgeom)
1325 {
1326 	char	line[256];
1327 	FILE *fp;
1328 
1329 	/* open the prototype file */
1330 	if ((fp = fopen(sgeom, "r")) == NULL) {
1331 		(void) fprintf(stderr, "fdisk: Cannot open file %s.\n",
1332 		    io_sgeom);
1333 		return (1);
1334 	}
1335 
1336 	/* Read a line from the file */
1337 	while (fgets(line, sizeof (line) - 1, fp)) {
1338 		if (line[0] == '\0' || line[0] == '\n' || line[0] == '*')
1339 			continue;
1340 		else {
1341 			line[strlen(line)] = '\0';
1342 			if (sscanf(line, "%hu %hu %hu %hu %hu %hu %d",
1343 			    &disk_geom.dkg_pcyl,
1344 			    &disk_geom.dkg_ncyl,
1345 			    &disk_geom.dkg_acyl,
1346 			    &disk_geom.dkg_bcyl,
1347 			    &disk_geom.dkg_nhead,
1348 			    &disk_geom.dkg_nsect,
1349 			    &sectsiz) != 7) {
1350 				(void) fprintf(stderr,
1351 				    "Syntax error:\n	\"%s\".\n",
1352 				    line);
1353 				return (1);
1354 			}
1355 			break;
1356 		} /* else */
1357 	} /* while (fgets(line, sizeof (line) - 1, fp)) */
1358 
1359 	if (!io_image) {
1360 		if (ioctl(Dev, DKIOCSGEOM, &disk_geom)) {
1361 			(void) fprintf(stderr,
1362 			    "fdisk: Cannot set label geometry.\n");
1363 			return (1);
1364 		}
1365 	} else {
1366 		Numcyl = hba_Numcyl = disk_geom.dkg_ncyl;
1367 		heads = hba_heads = disk_geom.dkg_nhead;
1368 		sectors = hba_sectors = disk_geom.dkg_nsect;
1369 		acyl = disk_geom.dkg_acyl;
1370 	}
1371 
1372 	(void) fclose(fp);
1373 	return (0);
1374 }
1375 
1376 /*
1377  * dev_mboot_read
1378  * Read the master boot sector from the device.
1379  */
1380 static void
1381 dev_mboot_read(void)
1382 {
1383 	if ((ioctl(Dev, DKIOCGMBOOT, Bootsect) < 0) && (errno != ENOTTY)) {
1384 		perror("Error in ioctl DKIOCGMBOOT");
1385 	}
1386 	if (errno == 0)
1387 		return;
1388 	if (lseek(Dev, 0, SEEK_SET) == -1) {
1389 		(void) fprintf(stderr,
1390 		    "fdisk: Error seeking to partition table on %s.\n",
1391 		    Dfltdev);
1392 		if (!io_image)
1393 			exit(1);
1394 	}
1395 	if (read(Dev, Bootsect, sectsiz) != sectsiz) {
1396 		(void) fprintf(stderr,
1397 		    "fdisk: Error reading partition table from %s.\n",
1398 		    Dfltdev);
1399 		if (!io_image)
1400 			exit(1);
1401 	}
1402 }
1403 
1404 /*
1405  * dev_mboot_write
1406  * Write the master boot sector to the device.
1407  */
1408 static void
1409 dev_mboot_write(off_t sect, char *buff, int bootsiz)
1410 {
1411 	int 	new_pt, old_pt, error;
1412 	int	clr_efi = -1;
1413 
1414 	if (io_readonly)
1415 		return;
1416 
1417 	if (io_debug) {
1418 		(void) fprintf(stderr, "About to write fdisk table:\n");
1419 		print_Table();
1420 		if (io_ifdisk) {
1421 			(void) fprintf(stderr, "Press Enter to continue.\n");
1422 			(void) fgets(s, sizeof (s), stdin);
1423 		}
1424 	}
1425 
1426 	/*
1427 	 * If the new table has any Solaris partitions and the old
1428 	 * table does not have an entry that describes it
1429 	 * exactly then clear the old vtoc (if any).
1430 	 */
1431 	for (new_pt = 0; new_pt < FD_NUMPART; new_pt++) {
1432 
1433 		/* We only care about potential Solaris parts. */
1434 		if (Table[new_pt].systid != SUNIXOS &&
1435 		    Table[new_pt].systid != SUNIXOS2)
1436 			continue;
1437 
1438 		/* Does the old table have an exact entry for the new entry? */
1439 		for (old_pt = 0; old_pt < FD_NUMPART; old_pt++) {
1440 
1441 			/* We only care about old Solaris partitions. */
1442 			if ((Old_Table[old_pt].systid == SUNIXOS) ||
1443 			    (Old_Table[old_pt].systid == SUNIXOS2)) {
1444 
1445 				/* Is this old one the same as a new one? */
1446 				if ((Old_Table[old_pt].relsect ==
1447 				    Table[new_pt].relsect) &&
1448 				    (Old_Table[old_pt].numsect ==
1449 				    Table[new_pt].numsect))
1450 					break; /* Yes */
1451 			}
1452 		}
1453 
1454 		/* Did a solaris partition change location or size? */
1455 		if (old_pt >= FD_NUMPART) {
1456 			/* Yes clear old vtoc */
1457 			if (io_debug) {
1458 				(void) fprintf(stderr,
1459 				    "Clearing VTOC labels from NEW"
1460 				    " table\n");
1461 			}
1462 			clear_vtoc(NEW, new_pt);
1463 		}
1464 	}
1465 
1466 
1467 	/* see if the old table had EFI */
1468 	for (old_pt = 0; old_pt < FD_NUMPART; old_pt++) {
1469 		if (Old_Table[old_pt].systid == EFI_PMBR) {
1470 			clr_efi = old_pt;
1471 		}
1472 	}
1473 
1474 	/* look to see if a EFI partition changed in relsect/numsect */
1475 	for (new_pt = 0; new_pt < FD_NUMPART; new_pt++) {
1476 		if (Table[new_pt].systid != EFI_PMBR)
1477 			continue;
1478 		for (old_pt = 0; old_pt < FD_NUMPART; old_pt++) {
1479 			if ((Old_Table[old_pt].systid ==
1480 			    Table[new_pt].systid) &&
1481 			    (Old_Table[old_pt].relsect ==
1482 			    Table[new_pt].relsect) &&
1483 			    (Old_Table[old_pt].numsect ==
1484 			    Table[new_pt].numsect))
1485 				break;
1486 		}
1487 
1488 		/*
1489 		 * if EFI partition changed, set the flag to clear
1490 		 * the EFI GPT
1491 		 */
1492 		if (old_pt == FD_NUMPART && Table[new_pt].begcyl != 0) {
1493 			clr_efi = 0;
1494 		}
1495 		break;
1496 	}
1497 
1498 	/* clear labels if necessary */
1499 	if (clr_efi >= 0) {
1500 		if (io_debug) {
1501 			(void) fprintf(stderr, "Clearing EFI labels\n");
1502 		}
1503 		if ((error = clear_efi()) != 0) {
1504 			if (io_debug) {
1505 				(void) fprintf(stderr,
1506 				    "\tError %d clearing EFI labels"
1507 				    " (probably no EFI labels exist)\n",
1508 				    error);
1509 			}
1510 		}
1511 	}
1512 
1513 	if ((ioctl(Dev, DKIOCSMBOOT, buff) == -1) && (errno != ENOTTY)) {
1514 		(void) fprintf(stderr,
1515 		    "fdisk: Error in ioctl DKIOCSMBOOT on %s.\n",
1516 		    Dfltdev);
1517 	}
1518 	if (errno == 0)
1519 		return;
1520 
1521 	/* write to disk drive */
1522 	if (lseek(Dev, sect, SEEK_SET) == -1) {
1523 		(void) fprintf(stderr,
1524 		    "fdisk: Error seeking to master boot record on %s.\n",
1525 		    Dfltdev);
1526 		exit(1);
1527 	}
1528 	if (write(Dev, buff, bootsiz) != bootsiz) {
1529 		(void) fprintf(stderr,
1530 		    "fdisk: Error writing master boot record to %s.\n",
1531 		    Dfltdev);
1532 		exit(1);
1533 	}
1534 }
1535 
1536 /*
1537  * mboot_read
1538  * Read the prototype boot records from the files.
1539  */
1540 static void
1541 mboot_read(void)
1542 {
1543 	int mDev, i;
1544 	struct ipart *part;
1545 
1546 #if defined(i386) || defined(sparc)
1547 	/*
1548 	 * If the master boot file hasn't been specified, use the
1549 	 * implementation architecture name to generate the default one.
1550 	 */
1551 	if (io_mboot == (char *)0) {
1552 		/*
1553 		 * Bug ID 1249035:
1554 		 *	The mboot file must be delivered on all platforms
1555 		 *	and installed in a non-platform-dependent
1556 		 *	directory; i.e., /usr/lib/fs/ufs.
1557 		 */
1558 		io_mboot = "/usr/lib/fs/ufs/mboot";
1559 	}
1560 
1561 	/* First read in the master boot record */
1562 
1563 	/* Open the master boot proto file */
1564 	if ((mDev = open(io_mboot, O_RDONLY, 0666)) == -1) {
1565 		(void) fprintf(stderr,
1566 		    "fdisk: Cannot open master boot file %s.\n",
1567 		    io_mboot);
1568 		exit(1);
1569 	}
1570 
1571 	/* Read the master boot program */
1572 	if (read(mDev, &BootCod, sizeof (struct mboot)) != sizeof
1573 	    (struct mboot)) {
1574 		(void) fprintf(stderr,
1575 		    "fdisk: Cannot read master boot file %s.\n",
1576 		    io_mboot);
1577 		exit(1);
1578 	}
1579 
1580 	/* Is this really a master boot record? */
1581 	if (LE_16(BootCod.signature) != MBB_MAGIC) {
1582 		(void) fprintf(stderr,
1583 		    "fdisk: Invalid master boot file %s.\n", io_mboot);
1584 		(void) fprintf(stderr,
1585 		    "Bad magic number: is %x, but should be %x.\n",
1586 		    LE_16(BootCod.signature), MBB_MAGIC);
1587 		exit(1);
1588 	}
1589 
1590 	(void) close(mDev);
1591 #else
1592 #error	fdisk needs to be ported to new architecture
1593 #endif
1594 
1595 	/* Zero out the partitions part of this record */
1596 	part = (struct ipart *)BootCod.parts;
1597 	for (i = 0; i < FD_NUMPART; i++, part++) {
1598 		(void) memset(part, 0, sizeof (struct ipart));
1599 	}
1600 
1601 }
1602 
1603 /*
1604  * fill_patt
1605  * Fill the disk with user/sector number pattern.
1606  */
1607 static void
1608 fill_patt(void)
1609 {
1610 	int	*buff_ptr, i;
1611 	off_t	*off_ptr;
1612 	int	io_fpatt = 0;
1613 	int	io_ipatt = 0;
1614 
1615 	if (strncmp(io_fatt, "#", 1) != 0) {
1616 		io_fpatt++;
1617 		io_ipatt = strtoul(io_fatt, 0, 0);
1618 		buff_ptr = (int *)Bootsect;
1619 		for (i = 0; i < sectsiz; i += 4, buff_ptr++)
1620 			*buff_ptr = io_ipatt;
1621 	}
1622 
1623 	/*
1624 	 * Fill disk with pattern based on block number.
1625 	 * Write to the disk at absolute relative block io_offset
1626 	 * for io_size blocks.
1627 	 */
1628 	while (io_size--) {
1629 		off_ptr = (off_t *)Bootsect;
1630 		if (!io_fpatt) {
1631 			for (i = 0; i < sectsiz;
1632 			    i += sizeof (off_t), off_ptr++)
1633 				*off_ptr = io_offset;
1634 		}
1635 		/* Write the data to disk */
1636 		if (lseek(Dev, (off_t)(sectsiz * io_offset++),
1637 		    SEEK_SET) == -1) {
1638 			(void) fprintf(stderr, "fdisk: Error seeking on %s.\n",
1639 			    Dfltdev);
1640 			exit(1);
1641 		}
1642 		if (write(Dev, Bootsect, sectsiz) != sectsiz) {
1643 			(void) fprintf(stderr, "fdisk: Error writing %s.\n",
1644 			    Dfltdev);
1645 			exit(1);
1646 		}
1647 	} /* while (--io_size); */
1648 }
1649 
1650 /*
1651  * abs_read
1652  * Read from the disk at absolute relative block io_offset for
1653  * io_size blocks. Write the data to standard ouput (-r).
1654  */
1655 static void
1656 abs_read(void)
1657 {
1658 	int c;
1659 
1660 	while (io_size--) {
1661 		if (lseek(Dev, (off_t)(sectsiz * io_offset++),
1662 		    SEEK_SET) == -1) {
1663 			(void) fprintf(stderr, "fdisk: Error seeking on %s.\n",
1664 			    Dfltdev);
1665 			exit(1);
1666 		}
1667 		if (read(Dev, Bootsect, sectsiz) != sectsiz) {
1668 			(void) fprintf(stderr, "fdisk: Error reading %s.\n",
1669 			    Dfltdev);
1670 			exit(1);
1671 		}
1672 
1673 		/* Write to standard ouptut */
1674 		if ((c = write(1, Bootsect, (unsigned)sectsiz)) != sectsiz) {
1675 			if (c >= 0) {
1676 				if (io_debug)
1677 					(void) fprintf(stderr,
1678 					    "fdisk: Output warning: %d of %d"
1679 					    " characters written.\n",
1680 					    c, sectsiz);
1681 				exit(2);
1682 			} else {
1683 				perror("write error on output file.");
1684 				exit(2);
1685 			}
1686 		} /* if ((c = write(1, Bootsect, (unsigned)sectsiz)) */
1687 			/* != sectsiz) */
1688 	} /* while (--io_size); */
1689 	exit(0);
1690 }
1691 
1692 /*
1693  * abs_write
1694  * Read the data from standard input. Write to the disk at
1695  * absolute relative block io_offset for io_size blocks (-w).
1696  */
1697 static void
1698 abs_write(void)
1699 {
1700 	int c, i;
1701 
1702 	while (io_size--) {
1703 		int part_exit = 0;
1704 		/* Read from standard input */
1705 		if ((c = read(0, Bootsect, (unsigned)sectsiz)) != sectsiz) {
1706 			if (c >= 0) {
1707 				if (io_debug)
1708 				(void) fprintf(stderr,
1709 				    "fdisk: WARNING: Incomplete read (%d of"
1710 				    " %d characters read) on input file.\n",
1711 				    c, sectsiz);
1712 				/* Fill pattern to mark partial sector in buf */
1713 				for (i = c; i < sectsiz; ) {
1714 					Bootsect[i++] = 0x41;
1715 					Bootsect[i++] = 0x62;
1716 					Bootsect[i++] = 0x65;
1717 					Bootsect[i++] = 0;
1718 				}
1719 				part_exit++;
1720 			} else {
1721 				perror("read error on input file.");
1722 				exit(2);
1723 			}
1724 
1725 		}
1726 		/* Write to disk drive */
1727 		if (lseek(Dev, (off_t)(sectsiz * io_offset++),
1728 		    SEEK_SET) == -1) {
1729 			(void) fprintf(stderr, "fdisk: Error seeking on %s.\n",
1730 			    Dfltdev);
1731 			exit(1);
1732 		}
1733 		if (write(Dev, Bootsect, sectsiz) != sectsiz) {
1734 			(void) fprintf(stderr, "fdisk: Error writing %s.\n",
1735 			    Dfltdev);
1736 			exit(1);
1737 		}
1738 		if (part_exit)
1739 		exit(0);
1740 	} /* while (--io_size); */
1741 	exit(1);
1742 }
1743 
1744 
1745 /*
1746  * load
1747  * Load will either read the fdisk table from a file or add or
1748  * delete an entry (-A, -D, -F).
1749  */
1750 
1751 static void
1752 load(int funct, char *file)
1753 {
1754 	int	id;
1755 	int	act;
1756 	int	bhead;
1757 	int	bsect;
1758 	int	bcyl;
1759 	int	ehead;
1760 	int	esect;
1761 	int	ecyl;
1762 	uint32_t	rsect;
1763 	uint32_t	numsect;
1764 	char	line[256];
1765 	int	i = 0;
1766 	FILE *fp;
1767 	int	startindex = 0;
1768 	int	tmpindex = 0;
1769 #ifdef i386
1770 	int 	ext_part_present = 0;
1771 	uint32_t	begsec, endsec, relsect;
1772 	logical_drive_t *temp;
1773 	int part_count = 0, ldcnt = 0;
1774 	uint32_t ext_beg_sec;
1775 	uint32_t old_ext_beg_sec = 0, old_ext_num_sec = 0;
1776 	uint32_t new_ext_beg_sec = 0, new_ext_num_sec = 0;
1777 	int ext_part_inited = 0;
1778 	uchar_t	systid;
1779 #endif
1780 
1781 	switch (funct) {
1782 
1783 	case LOADFILE:
1784 
1785 		/*
1786 		 * Zero out the table before loading it, which will
1787 		 * force it to be updated on disk later (-F
1788 		 * fdisk_file).
1789 		 */
1790 		nulltbl();
1791 
1792 		/* Open the prototype file */
1793 		if ((fp = fopen(file, "r")) == NULL) {
1794 			(void) fprintf(stderr,
1795 			    "fdisk: Cannot open prototype partition file %s.\n",
1796 			    file);
1797 			exit(1);
1798 		}
1799 
1800 		/* Read a line from the file */
1801 		while (fgets(line, sizeof (line) - 1, fp)) {
1802 			if (pars_fdisk(line, &id, &act, &bhead, &bsect,
1803 			    &bcyl, &ehead, &esect, &ecyl, &rsect, &numsect)) {
1804 				continue;
1805 			}
1806 #ifdef i386
1807 			part_count++;
1808 
1809 			if (fdisk_is_dos_extended((uchar_t)id)) {
1810 				if (ext_part_present) {
1811 					(void) fprintf(stderr,
1812 					    "Extended partition"
1813 					    " already exists\n");
1814 					(void) fprintf(stderr, "fdisk: Error on"
1815 					    " entry \"%s\".\n", line);
1816 					exit(1);
1817 				}
1818 				ext_part_present = 1;
1819 				/*
1820 				 * If the existing extended partition's start
1821 				 * and size matches the new one, do not
1822 				 * initialize the extended partition EBR
1823 				 * (Extended Boot Record) because there could
1824 				 * be existing logical drives.
1825 				 */
1826 				for (i = 0; i < FD_NUMPART; i++) {
1827 					systid = Old_Table[i].systid;
1828 					if (fdisk_is_dos_extended(systid)) {
1829 						old_ext_beg_sec =
1830 						    Old_Table[i].relsect;
1831 						old_ext_num_sec =
1832 						    Old_Table[i].numsect;
1833 						break;
1834 					}
1835 				}
1836 				new_ext_beg_sec = rsect;
1837 				new_ext_num_sec = numsect;
1838 				if ((old_ext_beg_sec != new_ext_beg_sec) ||
1839 				    (old_ext_num_sec != new_ext_num_sec)) {
1840 					(void) fdisk_init_ext_part(epp,
1841 					    new_ext_beg_sec, new_ext_num_sec);
1842 					ext_part_inited = 1;
1843 				}
1844 			}
1845 
1846 			if (part_count > FD_NUMPART) {
1847 				/* This line should be logical drive info */
1848 				int offset = MAX_LOGDRIVE_OFFSET;
1849 				if (!ext_part_present) {
1850 					/* Erroneous input file */
1851 					(void) fprintf(stderr,
1852 					    "More than 4 primary"
1853 					    " partitions found in input\n");
1854 					(void) fprintf(stderr, "Exiting...\n");
1855 					exit(1);
1856 				}
1857 
1858 				if (numsect == 0) {
1859 					continue;
1860 				}
1861 
1862 				/*
1863 				 * If the start and size of the existing
1864 				 * extended partition matches the new one and
1865 				 * new logical drives are being defined via
1866 				 * the input file, initialize the EBR.
1867 				 */
1868 				if (!ext_part_inited) {
1869 					(void) fdisk_init_ext_part(epp,
1870 					    new_ext_beg_sec, new_ext_num_sec);
1871 					ext_part_inited = 1;
1872 				}
1873 
1874 				begsec = rsect - offset;
1875 				if ((ldcnt =
1876 				    fdisk_get_logical_drive_count(epp)) == 0) {
1877 					/* Adding the first logical drive */
1878 					/*
1879 					 * Make sure that begsec doesnt wrap
1880 					 * around. This can happen if rsect is
1881 					 * less than offset.
1882 					 */
1883 					if (rsect < offset) {
1884 						(void) fprintf(stderr,
1885 						    "Minimum of "
1886 						    "63 free sectors required "
1887 						    "before the beginning of "
1888 						    "a logical drive.");
1889 						exit(1);
1890 					}
1891 					/*
1892 					 * Check if the first logical drive
1893 					 * is out of order. In that case, do
1894 					 * not subtract MAX_LOGDRIVE_OFFSET
1895 					 * from the given start of partition.
1896 					 */
1897 					if (begsec != new_ext_beg_sec) {
1898 						begsec = rsect;
1899 						offset = 0;
1900 					}
1901 				}
1902 				if (ldcnt >= MAX_EXT_PARTS) {
1903 					(void) fprintf(stderr,
1904 					    "\nError : Number of "
1905 					    "logical drives exceeds limit of "
1906 					    "%d.\n", MAX_EXT_PARTS);
1907 					exit(1);
1908 				}
1909 
1910 				if (id > FDISK_MAX_VALID_PART_ID) {
1911 					(void) fprintf(stderr,
1912 					    "Invalid partition ID\n");
1913 					(void) fprintf(stderr, "fdisk: Error on"
1914 					    " entry \"%s\".\n", line);
1915 					exit(1);
1916 				}
1917 
1918 				endsec = rsect + numsect - 1;
1919 				if (fdisk_validate_logical_drive(epp,
1920 				    begsec, offset, numsect) == 0) {
1921 					if (id == EFI_PMBR) {
1922 						(void) fprintf(stderr, "EFI "
1923 						    "partitions not supported "
1924 						    "inside extended "
1925 						    "partition\n");
1926 						exit(1);
1927 					}
1928 					fdisk_add_logical_drive(epp, begsec,
1929 					    endsec, id);
1930 					continue;
1931 				} else {
1932 					(void) fprintf(stderr, "fdisk: Error on"
1933 					    " entry \"%s\".\n", line);
1934 					exit(1);
1935 				}
1936 			}
1937 #endif
1938 
1939 			/*
1940 			 * Validate the partition. It cannot start at sector
1941 			 * 0 unless it is UNUSED or already exists
1942 			 */
1943 			if (validate_part(id, rsect, numsect) < 0) {
1944 				(void) fprintf(stderr,
1945 				    "fdisk: Error on entry \"%s\".\n",
1946 				    line);
1947 				exit(1);
1948 			}
1949 
1950 			if ((tmpindex = entry_from_old_table(id, act, bhead,
1951 			    bsect, bcyl, ehead, esect, ecyl, rsect, numsect,
1952 			    startindex)) != -1) {
1953 				/*
1954 				 * If we got here it means we copied an
1955 				 * unmodified entry. So there is no need
1956 				 * to insert it in the table or do any
1957 				 * checks against disk size.
1958 				 *
1959 				 * This is a work around on the following
1960 				 * situation (for IDE disks, at least):
1961 				 * Different operation systems calculate
1962 				 * disk size different ways, of which there
1963 				 * are two main ways.
1964 				 *
1965 				 * The first, rounds the disk size to modulo
1966 				 * cylinder size (virtual made-up cylinder
1967 				 * usually based on maximum number of heads
1968 				 * and sectors in partition table fields).
1969 				 * Our OS's (for IDE) and most other "Unix"
1970 				 * type OS's do this.
1971 				 *
1972 				 * The second, uses every single block
1973 				 * on the disk (to maximize available space).
1974 				 * Since disk manufactures do not know about
1975 				 * "virtual cylinders", there are some number
1976 				 * of blocks that make up a partial cylinder
1977 				 * at the end of the disk.
1978 				 *
1979 				 * The difference between these two methods
1980 				 * is where the problem is. When one
1981 				 * tries to install Solaris/OpenSolaris on
1982 				 * a disk that has another OS using that
1983 				 * "partial cylinder", install fails. It fails
1984 				 * since fdisk thinks its asked to create a
1985 				 * partition with the -F option that contains
1986 				 * a partition that runs off the end of the
1987 				 * disk.
1988 				 */
1989 				startindex = tmpindex + 1;
1990 				continue;
1991 			}
1992 
1993 			/*
1994 			 * Find an unused entry to use and put the entry
1995 			 * in table
1996 			 */
1997 			if ((startindex = insert_tbl(id, act, bhead, bsect,
1998 			    bcyl, ehead, esect, ecyl, rsect, numsect,
1999 			    startindex)) < 0) {
2000 				(void) fprintf(stderr,
2001 				    "fdisk: Error on entry \"%s\".\n",
2002 				    line);
2003 				exit(1);
2004 			}
2005 			startindex++;
2006 		} /* while (fgets(line, sizeof (line) - 1, fp)) */
2007 
2008 		if (verify_tbl() < 0) {
2009 			(void) fprintf(stderr,
2010 			    "fdisk: Cannot create partition table\n");
2011 			exit(1);
2012 		}
2013 
2014 		(void) fclose(fp);
2015 		return;
2016 
2017 	case LOADDEL:
2018 
2019 		/* Parse the user-supplied deletion line (-D) */
2020 		if (pars_fdisk(file, &id, &act, &bhead, &bsect, &bcyl,
2021 		    &ehead, &esect, &ecyl, &rsect, &numsect)) {
2022 			(void) fprintf(stderr,
2023 			    "fdisk: Syntax error \"%s\"\n", file);
2024 			exit(1);
2025 		}
2026 
2027 		/* Find the exact entry in the table */
2028 		for (i = 0; i < FD_NUMPART; i++) {
2029 			if (Table[i].systid == id &&
2030 			    Table[i].bootid == act &&
2031 			    Table[i].beghead == bhead &&
2032 			    Table[i].begsect == ((bsect & 0x3f) |
2033 			    (uchar_t)((bcyl>>2) & 0xc0)) &&
2034 			    Table[i].begcyl == (uchar_t)(bcyl & 0xff) &&
2035 			    Table[i].endhead == ehead &&
2036 			    Table[i].endsect == ((esect & 0x3f) |
2037 			    (uchar_t)((ecyl>>2) & 0xc0)) &&
2038 			    Table[i].endcyl == (uchar_t)(ecyl & 0xff) &&
2039 			    Table[i].relsect == LE_32(rsect) &&
2040 			    Table[i].numsect == LE_32(numsect)) {
2041 
2042 				(void) memset(&Table[i], 0,
2043 				    sizeof (struct ipart));
2044 #ifdef i386
2045 				if (fdisk_is_dos_extended(id)) {
2046 					(void) fdisk_delete_ext_part(epp);
2047 				}
2048 #endif
2049 				return;
2050 			}
2051 		}
2052 
2053 #ifdef i386
2054 		ldcnt = FD_NUMPART + 1;
2055 		for (temp = fdisk_get_ld_head(epp); temp != NULL;
2056 		    temp = temp->next) {
2057 			relsect = temp->abs_secnum + temp->logdrive_offset;
2058 			if (temp->parts[0].systid == id &&
2059 			    temp->parts[0].bootid == act &&
2060 			    temp->parts[0].beghead == bhead &&
2061 			    temp->parts[0].begsect == ((bsect & 0x3f) |
2062 			    (uchar_t)((bcyl>>2) & 0xc0)) &&
2063 			    temp->parts[0].begcyl == (uchar_t)(bcyl & 0xff) &&
2064 			    temp->parts[0].endhead == ehead &&
2065 			    temp->parts[0].endsect == ((esect & 0x3f) |
2066 			    (uchar_t)((ecyl>>2) & 0xc0)) &&
2067 			    temp->parts[0].endcyl == (uchar_t)(ecyl & 0xff) &&
2068 			    relsect == LE_32(rsect) &&
2069 			    temp->parts[0].numsect == LE_32(numsect)) {
2070 				fdisk_delete_logical_drive(epp, ldcnt);
2071 				return;
2072 			}
2073 			ldcnt++;
2074 		}
2075 #endif
2076 
2077 		(void) fprintf(stderr,
2078 		    "fdisk: Entry does not match any existing partition:\n"
2079 		    "	\"%s\"\n",
2080 		    file);
2081 		exit(1);
2082 		/* FALLTHRU */
2083 
2084 	case LOADADD:
2085 
2086 		/* Parse the user-supplied addition line (-A) */
2087 		if (pars_fdisk(file, &id, &act, &bhead, &bsect, &bcyl, &ehead,
2088 		    &esect, &ecyl, &rsect, &numsect)) {
2089 			(void) fprintf(stderr,
2090 			    "fdisk: Syntax error \"%s\"\n", file);
2091 			exit(1);
2092 		}
2093 
2094 		/* Validate the partition. It cannot start at sector 0 */
2095 		if (rsect == 0) {
2096 			(void) fprintf(stderr,
2097 			    "fdisk: New partition cannot start at sector 0:\n"
2098 			    "   \"%s\".\n",
2099 			    file);
2100 			exit(1);
2101 		}
2102 
2103 		/*
2104 		 * if the user wishes to add an EFI partition, we need
2105 		 * more extensive validation.  rsect should be 1, and
2106 		 * numsect should equal the entire disk capacity - 1
2107 		 */
2108 
2109 		if (id == EFI_PMBR) {
2110 			if (rsect != 1) {
2111 				(void) fprintf(stderr,
2112 				    "fdisk: EFI partitions must start at sector"
2113 				    " 1 (input rsect = %d)\n", rsect);
2114 				exit(1);
2115 			}
2116 
2117 
2118 			if (dev_capacity > DK_MAX_2TB) {
2119 				if (numsect != DK_MAX_2TB) {
2120 					(void) fprintf(stderr,
2121 					    "fdisk: EFI partitions must "
2122 					    "encompass the entire maximum 2 TB "
2123 					    "(input numsect: %u - max: %llu)\n",
2124 					    numsect, (diskaddr_t)DK_MAX_2TB);
2125 				exit(1);
2126 				}
2127 			} else if (numsect != dev_capacity - 1) {
2128 				(void) fprintf(stderr,
2129 				    "fdisk: EFI partitions must encompass the "
2130 				    "entire disk\n"
2131 				    "(input numsect: %u - avail: %llu)\n",
2132 				    numsect,
2133 				    dev_capacity - 1);
2134 				exit(1);
2135 			}
2136 		}
2137 
2138 #ifdef i386
2139 		if (id > FDISK_MAX_VALID_PART_ID) {
2140 			(void) printf("Invalid partition ID\n");
2141 			exit(1);
2142 		}
2143 
2144 		if ((fdisk_ext_part_exists(epp)) &&
2145 		    (fdisk_is_dos_extended(id))) {
2146 			(void) fprintf(stderr,
2147 			    "Extended partition already exists.\n");
2148 			(void) fprintf(stderr,
2149 			    "fdisk: Invalid entry could not be "
2150 			    "inserted:\n        \"%s\"\n", file);
2151 			exit(1);
2152 		}
2153 
2154 		if (fdisk_ext_part_exists(epp) &&
2155 		    (rsect >= (ext_beg_sec = fdisk_get_ext_beg_sec(epp))) &&
2156 		    (rsect <= (fdisk_get_ext_end_sec(epp)))) {
2157 			int offset = MAX_LOGDRIVE_OFFSET;
2158 
2159 			/*
2160 			 * Make sure that begsec doesnt wrap around.
2161 			 * This can happen if rsect is less than offset
2162 			 */
2163 			if (rsect < offset) {
2164 				return;
2165 			}
2166 			begsec = rsect - offset;
2167 			if ((ldcnt = fdisk_get_logical_drive_count(epp)) == 0) {
2168 				/*
2169 				 * Adding the first logical drive
2170 				 * Check if the first logical drive
2171 				 * is out of order. In that case, do
2172 				 * not subtract MAX_LOGDRIVE_OFFSET
2173 				 * from the given start of partition.
2174 				 */
2175 				if (begsec != ext_beg_sec) {
2176 					begsec = rsect;
2177 					offset = 0;
2178 				}
2179 			}
2180 
2181 			if (ldcnt >= MAX_EXT_PARTS) {
2182 				(void) printf("\nNumber of logical drives "
2183 				    "exceeds limit of %d.\n", MAX_EXT_PARTS);
2184 				(void) printf("Failing further additions.\n");
2185 				exit(1);
2186 			}
2187 
2188 			if (numsect == 0) {
2189 				(void) fprintf(stderr,
2190 				    "fdisk: Partition size cannot be zero:\n"
2191 				    "   \"%s\".\n",
2192 				    file);
2193 				exit(1);
2194 			}
2195 			endsec = rsect + numsect - 1;
2196 			if (fdisk_validate_logical_drive(epp, begsec,
2197 			    offset, numsect) == 0) {
2198 				/* Valid logical drive */
2199 				fdisk_add_logical_drive(epp, begsec, endsec,
2200 				    id);
2201 				return;
2202 			} else {
2203 				(void) fprintf(stderr,
2204 				    "fdisk: Invalid entry could not be "
2205 				    "inserted:\n        \"%s\"\n", file);
2206 				exit(1);
2207 			}
2208 		}
2209 #endif
2210 
2211 		/* Find unused entry for use and put entry in table */
2212 		if (insert_tbl(id, act, bhead, bsect, bcyl, ehead, esect,
2213 		    ecyl, rsect, numsect, 0) < 0) {
2214 			(void) fprintf(stderr,
2215 			    "fdisk: Invalid entry could not be inserted:\n"
2216 			    "	\"%s\"\n",
2217 			    file);
2218 			exit(1);
2219 		}
2220 
2221 		/* Make sure new entry does not overlap existing entry */
2222 		if (verify_tbl() < 0) {
2223 			(void) fprintf(stderr,
2224 			    "fdisk: Cannot create partition \"%s\"\n", file);
2225 			exit(1);
2226 		}
2227 	} /* switch funct */
2228 }
2229 
2230 /*
2231  * Set_Table_CHS_Values
2232  *
2233  * This will calculate the CHS values for beginning and ending CHS
2234  * for a single partition table entry (ti) based on the relsect
2235  * and numsect values contained in the partion table entry.
2236  *
2237  * hba_heads and hba_sectors contain the number of heads and sectors.
2238  *
2239  * If the number of cylinders exceeds the MAX_CYL,
2240  * then maximum values will be placed in the corresponding chs entry.
2241  */
2242 static void
2243 Set_Table_CHS_Values(int ti)
2244 {
2245 	uint32_t	lba, cy, hd, sc;
2246 
2247 	lba = (uint32_t)Table[ti].relsect;
2248 	if (lba >= hba_heads * hba_sectors * MAX_CYL) {
2249 		/*
2250 		 * the lba address cannot be expressed in CHS value
2251 		 * so store the maximum CHS field values in the CHS fields.
2252 		 */
2253 		cy = MAX_CYL + 1;
2254 		hd = MAX_HEAD;
2255 		sc = MAX_SECT;
2256 	} else {
2257 		cy = lba / hba_sectors / hba_heads;
2258 		hd = lba / hba_sectors % hba_heads;
2259 		sc = lba % hba_sectors + 1;
2260 	}
2261 	Table[ti].begcyl = cy & 0xff;
2262 	Table[ti].beghead = (uchar_t)hd;
2263 	Table[ti].begsect = (uchar_t)(((cy >> 2) & 0xc0) | sc);
2264 
2265 	/*
2266 	 * This code is identical to the code above
2267 	 * except that it works on ending CHS values
2268 	 */
2269 	lba = (uint32_t)(Table[ti].relsect + Table[ti].numsect - 1);
2270 	if (lba >= hba_heads * hba_sectors * MAX_CYL) {
2271 		cy = MAX_CYL + 1;
2272 		hd = MAX_HEAD;
2273 		sc = MAX_SECT;
2274 	} else {
2275 		cy = lba / hba_sectors / hba_heads;
2276 		hd = lba / hba_sectors % hba_heads;
2277 		sc = lba % hba_sectors + 1;
2278 	}
2279 	Table[ti].endcyl = cy & 0xff;
2280 	Table[ti].endhead = (uchar_t)hd;
2281 	Table[ti].endsect = (uchar_t)(((cy >> 2) & 0xc0) | sc);
2282 }
2283 
2284 /*
2285  * insert_tbl
2286  * 	Insert entry into fdisk table. Check all user-supplied values
2287  *	for the entry, but not the validity relative to other table
2288  *	entries!
2289  */
2290 static int
2291 insert_tbl(
2292     int id, int act,
2293     int bhead, int bsect, int bcyl,
2294     int ehead, int esect, int ecyl,
2295     uint32_t rsect, uint32_t numsect, int startindex)
2296 {
2297 	int	i;
2298 
2299 	/* validate partition size */
2300 	if (((diskaddr_t)rsect + numsect) > dev_capacity) {
2301 		(void) fprintf(stderr,
2302 		    "fdisk: Partition table exceeds the size of the disk.\n");
2303 		return (-1);
2304 	}
2305 
2306 
2307 	/* find UNUSED partition table entry */
2308 	for (i = startindex; i < FD_NUMPART; i++) {
2309 		if (Table[i].systid == UNUSED) {
2310 			break;
2311 		}
2312 	}
2313 	if (i >= FD_NUMPART) {
2314 		(void) fprintf(stderr, "fdisk: Partition table is full.\n");
2315 		return (-1);
2316 	}
2317 
2318 
2319 	Table[i].systid = (uchar_t)id;
2320 	Table[i].bootid = (uchar_t)act;
2321 	Table[i].numsect = LE_32(numsect);
2322 	Table[i].relsect = LE_32(rsect);
2323 
2324 	if (id == UNUSED) {
2325 		(void) memset(&Table[i], 0, sizeof (struct ipart));
2326 	} else if (0 < bsect && bsect <= MAX_SECT &&
2327 	    0 <= bhead && bhead <= MAX_HEAD &&
2328 	    0 < esect && esect <= MAX_SECT &&
2329 	    0 <= ehead && ehead <= MAX_HEAD) {
2330 
2331 		/*
2332 		 * If we have been called with a valid geometry, use it
2333 		 * valid means non-zero values that fit in the BIOS fields
2334 		 */
2335 		if (bcyl > MAX_CYL)
2336 			bcyl = MAX_CYL + 1;
2337 		if (ecyl > MAX_CYL)
2338 			ecyl = MAX_CYL + 1;
2339 		Table[i].begcyl = bcyl & 0xff;
2340 		Table[i].endcyl = ecyl & 0xff;
2341 		Table[i].beghead = (uchar_t)bhead;
2342 		Table[i].endhead = (uchar_t)ehead;
2343 		Table[i].begsect = (uchar_t)(((bcyl >> 2) & 0xc0) | bsect);
2344 		Table[i].endsect = ((ecyl >> 2) & 0xc0) | esect;
2345 	} else {
2346 
2347 		/*
2348 		 * The specified values are invalid,
2349 		 * so calculate the values based on hba_heads, hba_sectors
2350 		 */
2351 		Set_Table_CHS_Values(i);
2352 	}
2353 
2354 	/*
2355 	 * return partition index
2356 	 */
2357 	return (i);
2358 }
2359 
2360 /*
2361  * entry_from_old_table
2362  *	If the specified entry is in the old table and is not a Solaris entry
2363  *	then insert same entry into new fdisk table. If we do this then
2364  *	all checks are skipped for that entry!
2365  */
2366 static int
2367 entry_from_old_table(
2368     int id, int act,
2369     int bhead, int bsect, int bcyl,
2370     int ehead, int esect, int ecyl,
2371     uint32_t rsect, uint32_t numsect, int startindex)
2372 {
2373 	uint32_t	i, j;
2374 
2375 	if (id == SUNIXOS || id == SUNIXOS2 || id == UNUSED)
2376 		return (-1);
2377 	for (i = 0; i < FD_NUMPART; i++) {
2378 		if (Old_Table[i].systid == id &&
2379 		    Old_Table[i].bootid == act &&
2380 		    Old_Table[i].beghead == bhead &&
2381 		    Old_Table[i].begsect == ((bsect & 0x3f) |
2382 		    (uchar_t)((bcyl>>2) & 0xc0)) &&
2383 		    Old_Table[i].begcyl == (uchar_t)(bcyl & 0xff) &&
2384 		    Old_Table[i].endhead == ehead &&
2385 		    Old_Table[i].endsect == ((esect & 0x3f) |
2386 		    (uchar_t)((ecyl>>2) & 0xc0)) &&
2387 		    Old_Table[i].endcyl == (uchar_t)(ecyl & 0xff) &&
2388 		    Old_Table[i].relsect == lel(rsect) &&
2389 		    Old_Table[i].numsect == lel(numsect)) {
2390 			/* find UNUSED partition table entry */
2391 			for (j = startindex; j < FD_NUMPART; j++) {
2392 				if (Table[j].systid == UNUSED) {
2393 					(void) memcpy(&Table[j], &Old_Table[i],
2394 					    sizeof (Table[0]));
2395 					skip_verify[j] = 1;
2396 					return (j);
2397 
2398 				}
2399 			}
2400 			return (-1);
2401 		}
2402 
2403 	}
2404 	return (-1);
2405 }
2406 
2407 /*
2408  * verify_tbl
2409  * Verify that no partition entries overlap or exceed the size of
2410  * the disk.
2411  */
2412 static int
2413 verify_tbl(void)
2414 {
2415 	uint32_t	i, j, rsect, numsect;
2416 	int	noMoreParts = 0;
2417 	int	numParts = 0;
2418 
2419 	/* Make sure new entry does not overlap an existing entry */
2420 	for (i = 0; i < FD_NUMPART - 1; i++) {
2421 		if (Table[i].systid != UNUSED) {
2422 			numParts++;
2423 			/*
2424 			 * No valid partitions allowed after EFI_PMBR part
2425 			 */
2426 			if (noMoreParts) {
2427 				return (-1);
2428 			}
2429 
2430 			if (Table[i].systid == EFI_PMBR) {
2431 				/*
2432 				 * EFI_PMBR partition must be the only
2433 				 * partition
2434 				 */
2435 				noMoreParts = 1;
2436 
2437 				if (Table[i].relsect != 1) {
2438 					(void) fprintf(stderr, "ERROR: "
2439 					    "Invalid starting sector "
2440 					    "for EFI_PMBR partition:\n"
2441 					    "relsect %d "
2442 					    "(should be 1)\n",
2443 					    Table[i].relsect);
2444 
2445 					return (-1);
2446 				}
2447 
2448 				if (Table[i].numsect !=
2449 				    ((dev_capacity > DK_MAX_2TB) ? DK_MAX_2TB:
2450 				    (dev_capacity - 1))) {
2451 
2452 					(void) fprintf(stderr, "ERROR: "
2453 					    "EFI_PMBR partition must "
2454 					    "encompass the entire");
2455 
2456 					if (dev_capacity > DK_MAX_2TB)
2457 						(void) fprintf(stderr,
2458 						    "maximum 2 TB.\n "
2459 						    "numsect %u - "
2460 						    "actual %llu\n",
2461 						    Table[i].numsect,
2462 						    (diskaddr_t)DK_MAX_2TB);
2463 
2464 					else
2465 						(void) fprintf(stderr,
2466 						    "disk.\n numsect %u - "
2467 						    "actual %llu\n",
2468 						    Table[i].numsect,
2469 						    dev_capacity - 1);
2470 
2471 					return (-1);
2472 				}
2473 			}
2474 
2475 			/* make sure the partition isn't larger than the disk */
2476 			rsect = LE_32(Table[i].relsect);
2477 			numsect = LE_32(Table[i].numsect);
2478 
2479 			if ((((diskaddr_t)rsect + numsect) > dev_capacity) ||
2480 			    (((diskaddr_t)rsect + numsect) > DK_MAX_2TB)) {
2481 				if (!skip_verify[i])
2482 					return (-1);
2483 			}
2484 
2485 			for (j = i + 1; j < FD_NUMPART; j++) {
2486 				if (Table[j].systid != UNUSED) {
2487 					uint32_t t_relsect =
2488 					    LE_32(Table[j].relsect);
2489 					uint32_t t_numsect =
2490 					    LE_32(Table[j].numsect);
2491 
2492 					if (noMoreParts) {
2493 						(void) fprintf(stderr,
2494 						    "Cannot add partition to "
2495 						    "table; no more partitions "
2496 						    "allowed\n");
2497 
2498 						if (io_debug) {
2499 							(void) fprintf(stderr,
2500 							    "DEBUG: Current "
2501 							    "partition:\t"
2502 							    "%d:%d:%d:%d:%d:"
2503 							    "%d:%d:%d:%d:%d\n"
2504 							    "       Next "
2505 							    "partition:\t\t"
2506 							    "%d:%d:%d:%d:%d:"
2507 							    "%d:%d:%d:%d:%d\n",
2508 							    Table[i].systid,
2509 							    Table[i].bootid,
2510 							    Table[i].begcyl,
2511 							    Table[i].beghead,
2512 							    Table[i].begsect,
2513 							    Table[i].endcyl,
2514 							    Table[i].endhead,
2515 							    Table[i].endsect,
2516 							    Table[i].relsect,
2517 							    Table[i].numsect,
2518 							    Table[j].systid,
2519 							    Table[j].bootid,
2520 							    Table[j].begcyl,
2521 							    Table[j].beghead,
2522 							    Table[j].begsect,
2523 							    Table[j].endcyl,
2524 							    Table[j].endhead,
2525 							    Table[j].endsect,
2526 							    Table[j].relsect,
2527 							    Table[j].numsect);
2528 						}
2529 
2530 						return (-1);
2531 					}
2532 					if ((rsect >=
2533 					    (t_relsect + t_numsect)) ||
2534 					    ((rsect + numsect) <= t_relsect)) {
2535 						continue;
2536 					} else {
2537 						(void) fprintf(stderr, "ERROR: "
2538 						    "current partition overlaps"
2539 						    " following partition\n");
2540 
2541 						return (-1);
2542 					}
2543 				}
2544 			}
2545 		}
2546 	}
2547 	if (Table[i].systid != UNUSED) {
2548 		if (noMoreParts)
2549 			return (-1);
2550 		if (!skip_verify[i] &&
2551 		    ((((diskaddr_t)lel(Table[i].relsect) +
2552 		    lel(Table[i].numsect)) > dev_capacity) ||
2553 		    (((diskaddr_t)lel(Table[i].relsect) +
2554 		    lel(Table[i].numsect)) > DK_MAX_2TB))) {
2555 			return (-1);
2556 		}
2557 	}
2558 
2559 	return (numParts);
2560 }
2561 
2562 /*
2563  * pars_fdisk
2564  * Parse user-supplied data to set up fdisk partitions
2565  * (-A, -D, -F).
2566  */
2567 static int
2568 pars_fdisk(
2569     char *line,
2570     int *id, int *act,
2571     int *bhead, int *bsect, int *bcyl,
2572     int *ehead, int *esect, int *ecyl,
2573     uint32_t *rsect, uint32_t *numsect)
2574 {
2575 	int	i;
2576 	int64_t test;
2577 	char *tok, *p;
2578 	char buf[256];
2579 
2580 	if (line[0] == '\0' || line[0] == '\n' || line[0] == '*')
2581 		return (1);
2582 	line[strlen(line)] = '\0';
2583 	for (i = 0; i < strlen(line); i++) {
2584 		if (line[i] == '\0') {
2585 			break;
2586 		} else if (line[i] == ':') {
2587 			line[i] = ' ';
2588 		}
2589 	}
2590 	(void) strncpy(buf, line, 256);
2591 	errno = 0;
2592 	tok = strtok(buf, ": \t\n");
2593 	while (tok != NULL) {
2594 		for (p = tok; *p != '\0'; p++) {
2595 			if (!isdigit(*p)) {
2596 				(void) printf("Invalid input %s in line %s.\n",
2597 				    tok, line);
2598 				exit(1);
2599 			}
2600 		}
2601 
2602 		test = strtoll(tok, (char **)NULL, 10);
2603 		if ((test < 0) || (test > 0xFFFFFFFF) || (errno != 0)) {
2604 			(void) printf("Invalid input %s in line %s.\n", tok,
2605 			    line);
2606 			exit(1);
2607 		}
2608 		tok = strtok(NULL, ": \t\n");
2609 	}
2610 	if (sscanf(line, "%d %d %d %d %d %d %d %d %u %u",
2611 	    id, act, bhead, bsect, bcyl, ehead, esect, ecyl,
2612 	    rsect, numsect) != 10) {
2613 		(void) fprintf(stderr, "Syntax error:\n	\"%s\".\n", line);
2614 		exit(1);
2615 	}
2616 	return (0);
2617 }
2618 
2619 /*
2620  * validate_part
2621  * Validate that a new partition does not start at sector 0. Only UNUSED
2622  * partitions and previously existing partitions are allowed to start at 0.
2623  */
2624 static int
2625 validate_part(int id, uint32_t rsect, uint32_t numsect)
2626 {
2627 	int i;
2628 	if ((id != UNUSED) && (rsect == 0)) {
2629 		for (i = 0; i < FD_NUMPART; i++) {
2630 			if ((Old_Table[i].systid == id) &&
2631 			    (Old_Table[i].relsect == LE_32(rsect)) &&
2632 			    (Old_Table[i].numsect == LE_32(numsect)))
2633 				return (0);
2634 		}
2635 		(void) fprintf(stderr,
2636 		    "New partition cannot start at sector 0\n");
2637 		return (-1);
2638 	}
2639 #ifdef i386
2640 	if (id > FDISK_MAX_VALID_PART_ID) {
2641 		(void) fprintf(stderr, "Invalid partition ID\n");
2642 		return (-1);
2643 	}
2644 #endif
2645 	return (0);
2646 }
2647 
2648 /*
2649  * stage0
2650  * Print out interactive menu and process user input.
2651  */
2652 static void
2653 stage0(void)
2654 {
2655 #ifdef i386
2656 	int rval;
2657 #endif
2658 	dispmenu();
2659 	for (;;) {
2660 		(void) printf(Q_LINE);
2661 		(void) printf("Enter Selection: ");
2662 		(void) fgets(s, sizeof (s), stdin);
2663 		rm_blanks(s);
2664 #ifdef i386
2665 		while (!((s[0] > '0') && (s[0] < '8') &&
2666 		    ((s[1] == '\0') || (s[1] == '\n')))) {
2667 #else
2668 		while (!((s[0] > '0') && (s[0] < '7') &&
2669 		    ((s[1] == '\0') || (s[1] == '\n')))) {
2670 #endif
2671 			(void) printf(E_LINE); /* Clear any previous error */
2672 #ifdef i386
2673 			(void) printf(
2674 			    "Enter a one-digit number between 1 and 7.");
2675 #else
2676 			(void) printf(
2677 			    "Enter a one-digit number between 1 and 6.");
2678 #endif
2679 			(void) printf(Q_LINE);
2680 			(void) printf("Enter Selection: ");
2681 			(void) fgets(s, sizeof (s), stdin);
2682 			rm_blanks(s);
2683 		}
2684 		(void) printf(E_LINE);
2685 		switch (s[0]) {
2686 			case '1':
2687 				if (pcreate() == -1)
2688 					return;
2689 				break;
2690 			case '2':
2691 				if (pchange() == -1)
2692 					return;
2693 				break;
2694 			case '3':
2695 				if (pdelete() == -1)
2696 					return;
2697 				break;
2698 			case '4':
2699 				if (ppartid() == -1)
2700 					return;
2701 				break;
2702 #ifdef i386
2703 			case '5':
2704 				if (fdisk_ext_part_exists(epp)) {
2705 					ext_part_menu();
2706 				} else {
2707 					(void) printf(Q_LINE);
2708 					(void) printf("\nNo extended partition"
2709 					    " found\n");
2710 					(void) printf("Press enter to "
2711 					    "continue\n");
2712 					ext_read_input(s);
2713 				}
2714 				break;
2715 			case '6':
2716 				/* update disk partition table, if changed */
2717 				if (TableChanged() == 1) {
2718 					copy_Table_to_Bootblk();
2719 					dev_mboot_write(0, Bootsect, sectsiz);
2720 				}
2721 
2722 				/*
2723 				 * If the VTOC table is wrong fix it
2724 				 * (truncate only)
2725 				 */
2726 				if (io_adjt) {
2727 					fix_slice();
2728 				}
2729 				if (!io_readonly) {
2730 					rval = fdisk_commit_ext_part(epp);
2731 					switch (rval) {
2732 						case FDISK_SUCCESS:
2733 							/* Success */
2734 							/* Fallthrough */
2735 						case FDISK_ENOEXTPART:
2736 							/* Nothing to do */
2737 							break;
2738 						case FDISK_EMOUNTED:
2739 							(void) printf(Q_LINE);
2740 							preach_and_continue();
2741 							continue;
2742 						default:
2743 							perror("Commit failed");
2744 							exit(1);
2745 					}
2746 					libfdisk_fini(&epp);
2747 				}
2748 				(void) close(Dev);
2749 				exit(0);
2750 				/* NOTREACHED */
2751 #else
2752 			case '5':
2753 				/* update disk partition table, if changed */
2754 				if (TableChanged() == 1) {
2755 					copy_Table_to_Bootblk();
2756 					dev_mboot_write(0, Bootsect, sectsiz);
2757 				}
2758 				/*
2759 				 * If the VTOC table is wrong fix it
2760 				 * (truncate only)
2761 				 */
2762 				if (io_adjt) {
2763 					fix_slice();
2764 				}
2765 				(void) close(Dev);
2766 				exit(0);
2767 				/* FALLTHRU */
2768 #endif
2769 #ifdef i386
2770 			case '7':
2771 #else
2772 			case '6':
2773 #endif
2774 				/*
2775 				 * If the VTOC table is wrong fix it
2776 				 * (truncate only)
2777 				 */
2778 				if (io_adjt) {
2779 					fix_slice();
2780 				}
2781 				(void) close(Dev);
2782 				exit(0);
2783 				/* FALLTHRU */
2784 			default:
2785 				break;
2786 		}
2787 		copy_Table_to_Bootblk();
2788 		disptbl();
2789 		dispmenu();
2790 	}
2791 }
2792 
2793 /*
2794  * pcreate
2795  * Create partition entry in the table (interactive mode).
2796  */
2797 static int
2798 pcreate(void)
2799 {
2800 	uchar_t tsystid = 'z';
2801 	int i, j;
2802 	uint32_t numsect;
2803 	int retCode = 0;
2804 #ifdef i386
2805 	int ext_part_present = 0;
2806 #endif
2807 
2808 	i = 0;
2809 	for (;;) {
2810 		if (i == FD_NUMPART) {
2811 			(void) printf(E_LINE);
2812 			(void) printf(
2813 			    "The partition table is full!\n"
2814 			    "You must delete a partition before creating"
2815 			    " a new one.\n");
2816 			return (-1);
2817 		}
2818 		if (Table[i].systid == UNUSED) {
2819 			break;
2820 		}
2821 		i++;
2822 	}
2823 
2824 	numsect = 0;
2825 	for (i = 0; i < FD_NUMPART; i++) {
2826 		if (Table[i].systid != UNUSED) {
2827 			numsect += LE_32(Table[i].numsect);
2828 		}
2829 #ifdef i386
2830 		/* Check if an extended partition already exists */
2831 		if (fdisk_is_dos_extended(Table[i].systid)) {
2832 			ext_part_present = 1;
2833 		}
2834 #endif
2835 		if (numsect >= chs_capacity) {
2836 			(void) printf(E_LINE);
2837 			(void) printf("There is no more room on the disk for"
2838 			    " another partition.\n");
2839 			(void) printf(
2840 			    "You must delete a partition before creating"
2841 			    " a new one.\n");
2842 			return (-1);
2843 		}
2844 	}
2845 	while (tsystid == 'z') {
2846 
2847 		/*
2848 		 * The question here is expanding to more than what is
2849 		 * allocated for question lines (Q_LINE) which garbles
2850 		 * at least warning line. Clearing warning line as workaround
2851 		 * for now.
2852 		 */
2853 
2854 		(void) printf(W_LINE);
2855 		(void) printf(Q_LINE);
2856 		(void) printf(
2857 		    "Select the partition type to create:\n"
2858 		    "   1=SOLARIS2  2=UNIX        3=PCIXOS     4=Other\n"
2859 		    "   5=DOS12     6=DOS16       7=DOSEXT     8=DOSBIG\n"
2860 		    "   9=DOS16LBA  A=x86 Boot    B=Diagnostic C=FAT32\n"
2861 		    "   D=FAT32LBA  E=DOSEXTLBA   F=EFI        0=Exit? ");
2862 		(void) fgets(s, sizeof (s), stdin);
2863 		rm_blanks(s);
2864 		if ((s[1] != '\0') && (s[1] != '\n')) {
2865 			(void) printf(E_LINE);
2866 			(void) printf("Invalid selection, try again.");
2867 			continue;
2868 		}
2869 		switch (s[0]) {
2870 		case '0':		/* exit */
2871 			(void) printf(E_LINE);
2872 			return (-1);
2873 		case '1':		/* Solaris partition */
2874 			tsystid = SUNIXOS2;
2875 			break;
2876 		case '2':		/* UNIX partition */
2877 			tsystid = UNIXOS;
2878 			break;
2879 		case '3':		/* PCIXOS partition */
2880 			tsystid = PCIXOS;
2881 			break;
2882 		case '4':		/* OTHEROS System partition */
2883 			tsystid = OTHEROS;
2884 			break;
2885 		case '5':
2886 			tsystid = DOSOS12; /* DOS 12 bit fat */
2887 			break;
2888 		case '6':
2889 			tsystid = DOSOS16; /* DOS 16 bit fat */
2890 			break;
2891 		case '7':
2892 #ifdef i386
2893 			if (ext_part_present) {
2894 				(void) printf(Q_LINE);
2895 				(void) printf(E_LINE);
2896 				(void) fprintf(stderr,
2897 				    "Extended partition already exists\n");
2898 				(void) fprintf(stderr,
2899 				    "Press enter to continue\n");
2900 				ext_read_input(s);
2901 				continue;
2902 			}
2903 #endif
2904 			tsystid = EXTDOS;
2905 			break;
2906 		case '8':
2907 			tsystid = DOSHUGE;
2908 			break;
2909 		case '9':
2910 			tsystid = FDISK_FAT95;  /* FAT16, need extended int13 */
2911 			break;
2912 		case 'a':		/* x86 Boot partition */
2913 		case 'A':
2914 			tsystid = X86BOOT;
2915 			break;
2916 		case 'b':		/* Diagnostic boot partition */
2917 		case 'B':
2918 			tsystid = DIAGPART;
2919 			break;
2920 		case 'c':		/* FAT32 */
2921 		case 'C':
2922 			tsystid = FDISK_WINDOWS;
2923 			break;
2924 		case 'd':		/* FAT32 and need extended int13 */
2925 		case 'D':
2926 			tsystid = FDISK_EXT_WIN;
2927 			break;
2928 		case 'e':	/* Extended partition, need extended int13 */
2929 		case 'E':
2930 #ifdef i386
2931 			if (ext_part_present) {
2932 				(void) printf(Q_LINE);
2933 				(void) printf(E_LINE);
2934 				(void) fprintf(stderr,
2935 				    "Extended partition already exists\n");
2936 				(void) fprintf(stderr,
2937 				    "Press enter to continue\n");
2938 				ext_read_input(s);
2939 				continue;
2940 			}
2941 #endif
2942 			tsystid = FDISK_EXTLBA;
2943 			break;
2944 		case 'f':
2945 		case 'F':
2946 			tsystid = EFI_PMBR;
2947 			break;
2948 		default:
2949 			(void) printf(E_LINE);
2950 			(void) printf("Invalid selection, try again.");
2951 			continue;
2952 		}
2953 	}
2954 
2955 	(void) printf(E_LINE);
2956 
2957 	if (tsystid != EFI_PMBR) {
2958 		(void) printf(W_LINE);
2959 		if ((dev_capacity > DK_MAX_2TB))
2960 			(void) printf("WARNING: Disk is larger than 2 TB. "
2961 			    "Upper limit is 2 TB for non-EFI partition ID\n");
2962 
2963 		/* create the new partition */
2964 		i = specify(tsystid);
2965 
2966 		if (i != -1) {
2967 			/* see if it should be the active partition */
2968 			(void) printf(E_LINE);
2969 			(void) printf(Q_LINE);
2970 
2971 			(void) printf(
2972 			    "Should this become the active partition? If "
2973 			    "yes, it  will be activated\n"
2974 			    "each time the computer is reset or turned on.\n"
2975 			    "Please type \"y\" or \"n\". ");
2976 
2977 			if (yesno()) {
2978 				(void) printf(E_LINE);
2979 				for (j = 0; j < FD_NUMPART; j++) {
2980 					if (j == i) {
2981 						Table[j].bootid = ACTIVE;
2982 						(void) printf(E_LINE);
2983 						(void) printf(
2984 						    "Partition %d is now "
2985 						    "the active partition.",
2986 						    j + 1);
2987 					} else {
2988 						Table[j].bootid = 0;
2989 					}
2990 				}
2991 			} else {
2992 				Table[i].bootid = 0;
2993 			}
2994 
2995 #ifdef i386
2996 			/*
2997 			 * If partition created is an extended partition, null
2998 			 * out the first sector of the first cylinder of the
2999 			 * extended partition
3000 			 */
3001 			if (fdisk_is_dos_extended(Table[i].systid)) {
3002 				(void) fdisk_init_ext_part(epp,
3003 				    LE_32(Table[i].relsect),
3004 				    LE_32(Table[i].numsect));
3005 			}
3006 #endif
3007 			/* set up the return code */
3008 			i = 1;
3009 		}
3010 	} else {
3011 		/*
3012 		 * partitions of type EFI_PMBR must be the only partitions in
3013 		 * the table
3014 		 *
3015 		 * First, make sure there were no errors the table is
3016 		 * empty
3017 		 */
3018 		retCode = verify_tbl();
3019 
3020 		if (retCode < 0) {
3021 			(void) fprintf(stderr,
3022 			    "fdisk: Cannot create EFI partition table; \n"
3023 			    "current partition table is invalid.\n");
3024 			return (-1);
3025 		} else if (retCode > 0) {
3026 			(void) printf(
3027 			    "An EFI partition must be the only partition on "
3028 			    "disk.  You may manually delete existing\n"
3029 			    "partitions, or fdisk can do it.\n"
3030 			    "Do you want fdisk to destroy existing "
3031 			    "partitions?\n"
3032 			    "Please type \"y\" or \"n\". ");
3033 
3034 			if (yesno()) {
3035 				nulltbl();
3036 			} else {
3037 				return (-1);
3038 			}
3039 		}
3040 
3041 		/* create the table entry - i should be 0 */
3042 		i = insert_tbl(tsystid, 0, 0, 0, 0, 0, 0, 0, 1,
3043 		    (dev_capacity > DK_MAX_2TB) ? DK_MAX_2TB:
3044 		    (dev_capacity - 1), 0);
3045 
3046 		if (i != 0) {
3047 			(void) printf("Error creating EFI partition!!!\n");
3048 			i = -1;
3049 		} else {
3050 
3051 			/* EFI partitions are currently never active */
3052 			Table[i].bootid = 0;
3053 
3054 			/* set up the return code */
3055 			i = 1;
3056 		}
3057 	}
3058 
3059 	return (i);
3060 }
3061 
3062 /*
3063  * specify
3064  * Query the user to specify the size of the new partition in
3065  * terms of percentage of the disk or by specifying the starting
3066  * cylinder and length in cylinders.
3067  */
3068 static int
3069 specify(uchar_t tsystid)
3070 {
3071 	int	i, j, percent = -1;
3072 	int	cyl, cylen;
3073 	diskaddr_t first_free, size_free;
3074 	diskaddr_t max_free;
3075 	int	cyl_size;
3076 	struct ipart *partition[FD_NUMPART];
3077 	struct ipart localpart[FD_NUMPART];
3078 
3079 	cyl_size = heads * sectors;
3080 
3081 	/*
3082 	 * make a local copy of the partition table
3083 	 * and sort it into relsect order
3084 	 */
3085 
3086 
3087 	for (i = 0, j = 0; i < FD_NUMPART; i++) {
3088 		if (Table[i].systid != UNUSED) {
3089 			localpart[j] = Table[i];
3090 			j++;
3091 		}
3092 	}
3093 
3094 	while (j < FD_NUMPART) {
3095 		(void) memset(&localpart[j], 0, sizeof (struct ipart));
3096 		j++;
3097 	}
3098 
3099 	for (i = 0; i < FD_NUMPART; i++)
3100 		partition[i] = &localpart[i];
3101 
3102 	for (i = 0; i < FD_NUMPART - 1; i++) {
3103 		if (partition[i]->systid == UNUSED)
3104 			break;
3105 		for (j = i + 1; j < FD_NUMPART; j++) {
3106 			if (partition[j]->systid == UNUSED)
3107 				break;
3108 			if (LE_32(partition[j]->relsect) <
3109 			    LE_32(partition[i]->relsect)) {
3110 				struct ipart *temp = partition[i];
3111 				partition[i] = partition[j];
3112 				partition[j] = temp;
3113 			}
3114 		}
3115 	}
3116 
3117 
3118 	(void) printf(Q_LINE);
3119 	(void) printf(
3120 	    "Specify the percentage of disk to use for this partition\n"
3121 	    "(or type \"c\" to specify the size in cylinders). ");
3122 	(void) fgets(s, sizeof (s), stdin);
3123 	rm_blanks(s);
3124 	if (s[0] != 'c') {	/* Specify size in percentage of disk */
3125 		i = 0;
3126 		while ((s[i] != '\0') && (s[i] != '\n')) {
3127 			if (s[i] < '0' || s[i] > '9') {
3128 				(void) printf(E_LINE);
3129 				(void) printf("Invalid percentage value "
3130 				    "specified; retry the operation.");
3131 				return (-1);
3132 			}
3133 			i++;
3134 			if (i > 3) {
3135 				(void) printf(E_LINE);
3136 				(void) printf("Invalid percentage value "
3137 				    "specified; retry the operation.");
3138 				return (-1);
3139 			}
3140 		}
3141 		if ((percent = atoi(s)) > 100) {
3142 			(void) printf(E_LINE);
3143 			(void) printf(
3144 			    "Percentage value is too large. The value must be"
3145 			    " between 1 and 100;\nretry the operation.\n");
3146 			return (-1);
3147 		}
3148 		if (percent < 1) {
3149 			(void) printf(E_LINE);
3150 			(void) printf(
3151 			    "Percentage value is too small. The value must be"
3152 			    " between 1 and 100;\nretry the operation.\n");
3153 			return (-1);
3154 		}
3155 
3156 		if (percent == 100)
3157 			cylen = Numcyl_usable - 1;
3158 		else
3159 			cylen = (Numcyl_usable * percent) / 100;
3160 
3161 		/* Verify DOS12 partition doesn't exceed max size of 32MB. */
3162 		if ((tsystid == DOSOS12) &&
3163 		    ((long)((long)cylen * cyl_size) > MAXDOS)) {
3164 			int n;
3165 			n = MAXDOS * 100 / (int)(cyl_size) / Numcyl_usable;
3166 			(void) printf(E_LINE);
3167 			(void) printf("Maximum size for a DOS partition "
3168 			    "is %d%%; retry the operation.",
3169 			    n <= 100 ? n : 100);
3170 			return (-1);
3171 		}
3172 
3173 
3174 		max_free = 0;
3175 		for (i = 0; i < FD_NUMPART; i++) {
3176 
3177 			/*
3178 			 * check for free space before partition i
3179 			 * where i varies from 0 to 3
3180 			 *
3181 			 * freespace after partition 3 is unusable
3182 			 * because there are no free partitions
3183 			 *
3184 			 * freespace begins at the end of previous partition
3185 			 * or cylinder 1
3186 			 */
3187 			if (i) {
3188 				/* Not an empty table */
3189 				first_free = LE_32(partition[i - 1]->relsect) +
3190 				    LE_32(partition[i - 1]->numsect);
3191 			} else {
3192 				first_free = cyl_size;
3193 			}
3194 
3195 			/*
3196 			 * freespace ends before the current partition
3197 			 * or the end of the disk (chs end)
3198 			 */
3199 			if (partition[i]->systid == UNUSED) {
3200 				size_free = chs_capacity - first_free;
3201 			} else {
3202 				/*
3203 				 * Partition might start before cylinder 1.
3204 				 * Make sure free space is not negative.
3205 				 */
3206 				size_free =
3207 				    (LE_32(partition[i]->relsect > first_free))
3208 				    ? (LE_32(partition[i]->relsect) -
3209 				    first_free) : 0;
3210 			}
3211 
3212 			/* save largest free space */
3213 			if (max_free < size_free)
3214 				max_free = size_free;
3215 
3216 			if (((uint64_t)cylen * cyl_size) <= size_free) {
3217 				/* We found a place to use */
3218 				break;
3219 			}
3220 			if (partition[i]->systid == UNUSED) {
3221 				(void) printf(E_LINE);
3222 				max_free /= (cyl_size);
3223 				(void) fprintf(stderr, "fdisk: "
3224 				    "Maximum percentage available is %lld\n",
3225 				    100 * max_free / Numcyl_usable);
3226 				return (-1);
3227 			}
3228 		}
3229 
3230 		(void) printf(E_LINE);
3231 		if (i >= FD_NUMPART) {
3232 			(void) fprintf(stderr,
3233 			    "fdisk: Partition table is full.\n");
3234 			return (-1);
3235 		}
3236 
3237 		if ((i = insert_tbl(tsystid, 0, 0, 0, 0, 0, 0, 0,
3238 		    first_free, cylen * cyl_size, 0)) >= 0)  {
3239 			return (i);
3240 		}
3241 		return (-1);
3242 	} else {
3243 
3244 		/* Specifying size in cylinders */
3245 		(void) printf(E_LINE);
3246 		(void) printf(Q_LINE);
3247 		(void) printf("Enter starting cylinder number: ");
3248 		if ((cyl = getcyl()) == -1) {
3249 			(void) printf(E_LINE);
3250 			(void) printf("Invalid number; retry the operation.");
3251 			return (-1);
3252 		}
3253 		if (cyl == 0) {
3254 			(void) printf(E_LINE);
3255 			(void) printf(
3256 			    "New partition cannot start at cylinder 0.\n");
3257 			return (-1);
3258 		}
3259 
3260 
3261 		if (cyl >= Numcyl_usable) {
3262 			(void) printf(E_LINE);
3263 			(void) printf(
3264 			    "Cylinder %d is out of bounds, "
3265 			    "the maximum is %d.\n",
3266 			    cyl, Numcyl_usable - 1);
3267 			return (-1);
3268 		}
3269 
3270 		(void) printf(Q_LINE);
3271 		(void) printf("Enter partition size in cylinders: ");
3272 		if ((cylen = getcyl()) == -1) {
3273 			(void) printf(E_LINE);
3274 			(void) printf("Invalid number, retry the operation.");
3275 			return (-1);
3276 		}
3277 
3278 		for (i = 0; i < FD_NUMPART; i++) {
3279 			uint32_t	t_relsect, t_numsect;
3280 
3281 			if (partition[i]->systid == UNUSED)
3282 				break;
3283 			t_relsect = LE_32(partition[i]->relsect);
3284 			t_numsect = LE_32(partition[i]->numsect);
3285 
3286 			if (cyl * cyl_size >= t_relsect &&
3287 			    cyl * cyl_size < t_relsect + t_numsect) {
3288 				(void) printf(E_LINE);
3289 				(void) printf(
3290 				    "Cylinder %d is already allocated"
3291 				    "\nretry the operation.",
3292 				    cyl);
3293 				return (-1);
3294 			}
3295 
3296 			if (cyl * cyl_size < t_relsect &&
3297 			    (cyl + cylen - 1) * cyl_size > t_relsect) {
3298 				(void) printf(E_LINE);
3299 				(void) printf(
3300 				    "Maximum size for partition is %u cylinders"
3301 				    "\nretry the operation.",
3302 				    (t_relsect - cyl * cyl_size) / cyl_size);
3303 				return (-1);
3304 			}
3305 		}
3306 
3307 		/* Verify partition doesn't exceed disk size or 2 TB */
3308 		if (cyl + cylen > Numcyl_usable) {
3309 			(void) printf(E_LINE);
3310 			if (Numcyl > Numcyl_usable) {
3311 				(void) printf(
3312 				    "Maximum size for partition is %d "
3313 				    "cylinders; \nretry the operation.",
3314 				    Numcyl_usable - cyl);
3315 			} else {
3316 				(void) printf(
3317 				    "Maximum size for partition is %d "
3318 				    "cylinders; \nretry the operation.",
3319 				    Numcyl_usable - cyl);
3320 			}
3321 			return (-1);
3322 		}
3323 
3324 		/* Verify DOS12 partition doesn't exceed max size of 32MB. */
3325 		if ((tsystid == DOSOS12) &&
3326 		    ((long)((long)cylen * cyl_size) > MAXDOS)) {
3327 			(void) printf(E_LINE);
3328 			(void) printf(
3329 			    "Maximum size for a %s partition is %ld cylinders;"
3330 			    "\nretry the operation.",
3331 			    Dstr, MAXDOS / (int)(cyl_size));
3332 			return (-1);
3333 		}
3334 
3335 		(void) printf(E_LINE);
3336 		i = insert_tbl(tsystid, 0, 0, 0, 0, 0, 0, 0,
3337 		    cyl * cyl_size, cylen * cyl_size, 0);
3338 		if (i < 0)
3339 			return (-1);
3340 
3341 		if (verify_tbl() < 0) {
3342 			(void) printf(E_LINE);
3343 			(void) printf("fdisk: Cannot create partition table\n");
3344 			return (-1);
3345 		}
3346 
3347 		return (i);
3348 	}
3349 }
3350 
3351 /*
3352  * dispmenu
3353  * Display command menu (interactive mode).
3354  */
3355 static void
3356 dispmenu(void)
3357 {
3358 	(void) printf(M_LINE);
3359 #ifdef i386
3360 	(void) printf(
3361 	    "SELECT ONE OF THE FOLLOWING:\n"
3362 	    "   1. Create a partition\n"
3363 	    "   2. Specify the active partition\n"
3364 	    "   3. Delete a partition\n"
3365 	    "   4. Change between Solaris and Solaris2 Partition IDs\n"
3366 	    "   5. Edit/View extended partitions\n"
3367 	    "   6. Exit (update disk configuration and exit)\n"
3368 	    "   7. Cancel (exit without updating disk configuration)\n");
3369 #else
3370 	(void) printf(
3371 	    "SELECT ONE OF THE FOLLOWING:\n"
3372 	    "   1. Create a partition\n"
3373 	    "   2. Specify the active partition\n"
3374 	    "   3. Delete a partition\n"
3375 	    "   4. Change between Solaris and Solaris2 Partition IDs\n"
3376 	    "   5. Exit (update disk configuration and exit)\n"
3377 	    "   6. Cancel (exit without updating disk configuration)\n");
3378 #endif
3379 }
3380 
3381 /*
3382  * pchange
3383  * Change the ACTIVE designation of a partition.
3384  */
3385 static int
3386 pchange(void)
3387 {
3388 	char s[80];
3389 	int i, j;
3390 
3391 	for (;;) {
3392 		(void) printf(Q_LINE);
3393 			{
3394 			(void) printf(
3395 			    "Specify the partition number to boot from"
3396 			    " (or specify 0 for none): ");
3397 			}
3398 		(void) fgets(s, sizeof (s), stdin);
3399 		rm_blanks(s);
3400 		if (((s[1] != '\0') && (s[1] != '\n')) ||
3401 		    (s[0] < '0') || (s[0] > '4')) {
3402 			(void) printf(E_LINE);
3403 			(void) printf(
3404 			    "Invalid response, please specify a number"
3405 			    " between 0 and 4.\n");
3406 		} else {
3407 			break;
3408 		}
3409 	}
3410 	if (s[0] == '0') {	/* No active partitions */
3411 		for (i = 0; i < FD_NUMPART; i++) {
3412 			if (Table[i].systid != UNUSED &&
3413 			    Table[i].bootid == ACTIVE)
3414 				Table[i].bootid = 0;
3415 		}
3416 		(void) printf(E_LINE);
3417 			(void) printf(
3418 			    "No partition is currently marked as active.");
3419 		return (0);
3420 	} else {	/* User has selected a partition to be active */
3421 
3422 		i = s[0] - '1';
3423 
3424 		if (Table[i].systid == UNUSED) {
3425 			(void) printf(E_LINE);
3426 			(void) printf("Partition does not exist.");
3427 			return (-1);
3428 		}
3429 		/* a DOS-DATA or EXT-DOS partition cannot be active */
3430 		else if ((Table[i].systid == DOSDATA) ||
3431 		    (Table[i].systid == EXTDOS) ||
3432 		    (Table[i].systid == FDISK_EXTLBA)) {
3433 			(void) printf(E_LINE);
3434 			(void) printf(
3435 			    "DOS-DATA, EXT_DOS and EXT_DOS_LBA partitions "
3436 			    "cannot be made active.\n");
3437 			(void) printf("Select another partition.");
3438 			return (-1);
3439 		}
3440 		Table[i].bootid = ACTIVE;
3441 		for (j = 0; j < FD_NUMPART; j++) {
3442 			if (j != i)
3443 			Table[j].bootid = 0;
3444 		}
3445 	}
3446 	(void) printf(E_LINE);
3447 		{
3448 		(void) printf(
3449 		    "Partition %d is now active. The system will start up"
3450 		    " from this\n", i + 1);
3451 		(void) printf("partition after the next reboot.");
3452 		}
3453 	return (1);
3454 }
3455 
3456 /*
3457  * Change between SOLARIS and SOLARIS2 partition id
3458  */
3459 static int
3460 ppartid(void)
3461 {
3462 	char	*p, s[80];
3463 	int	i;
3464 
3465 	for (;;) {
3466 		(void) printf(Q_LINE);
3467 		(void) printf("Specify the partition number to change"
3468 		    " (or enter 0 to exit): ");
3469 		if (!fgets(s, sizeof (s), stdin))
3470 			return (1);
3471 		i = strtol(s, &p, 10);
3472 
3473 		if (*p != '\n' || i < 0 || i > FD_NUMPART) {
3474 			(void) printf(E_LINE);
3475 			(void) printf(
3476 			    "Invalid response, retry the operation.\n");
3477 			continue;
3478 		}
3479 
3480 		if (i == 0) {
3481 			/* exit delete command */
3482 			(void) printf(E_LINE); /* clear error message */
3483 			return (1);
3484 		}
3485 
3486 		i -= 1;
3487 
3488 		if (Table[i].systid == SUNIXOS) {
3489 			Table[i].systid = SUNIXOS2;
3490 		} else if (Table[i].systid == SUNIXOS2) {
3491 			Table[i].systid = SUNIXOS;
3492 		} else {
3493 			(void) printf(E_LINE);
3494 			(void) printf(
3495 			    "Partition %d is not a Solaris partition.",
3496 			    i + 1);
3497 			continue;
3498 		}
3499 
3500 		(void) printf(E_LINE);
3501 		(void) printf("Partition %d has been changed.", i + 1);
3502 		return (1);
3503 	}
3504 }
3505 
3506 /*
3507  * pdelete
3508  * Remove partition entry from the table (interactive mode).
3509  */
3510 static char
3511 pdelete(void)
3512 {
3513 	char s[80];
3514 	int i;
3515 	char pactive;
3516 
3517 DEL1:	(void) printf(Q_LINE);
3518 	(void) printf("Specify the partition number to delete"
3519 	    " (or enter 0 to exit): ");
3520 	(void) fgets(s, sizeof (s), stdin);
3521 	rm_blanks(s);
3522 	if ((s[0] == '0')) {	/* exit delete command */
3523 		(void) printf(E_LINE);	/* clear error message */
3524 		return (1);
3525 	}
3526 	/* Accept only a single digit between 1 and 4 */
3527 	if (((s[1] != '\0') && (s[1] != '\n')) ||
3528 	    (i = atoi(s)) < 1 || i > FD_NUMPART) {
3529 		(void) printf(E_LINE);
3530 		(void) printf("Invalid response, retry the operation.\n");
3531 		goto DEL1;
3532 	} else {		/* Found a digit between 1 and 4 */
3533 		--i;	/* Structure begins with element 0 */
3534 	}
3535 
3536 	if (Table[i].systid == UNUSED) {
3537 		(void) printf(E_LINE);
3538 		(void) printf("Partition %d does not exist.", i + 1);
3539 		return (-1);
3540 	}
3541 
3542 #ifdef i386
3543 	if (fdisk_is_dos_extended(Table[i].systid) &&
3544 	    (Table[i].relsect == fdisk_get_ext_beg_sec(epp)) &&
3545 	    fdisk_get_logical_drive_count(epp)) {
3546 		(void) printf(Q_LINE);
3547 		(void) printf("There are logical drives inside the"
3548 		    " extended partition\n");
3549 		(void) printf("Are you sure of proceeding with deletion ?"
3550 		    " (type \"y\" or \"n\") ");
3551 
3552 		(void) printf(E_LINE);
3553 		if (! yesno()) {
3554 			return (1);
3555 		}
3556 		if (fdisk_mounted_logical_drives(epp) == FDISK_EMOUNTED) {
3557 			(void) printf(Q_LINE);
3558 			(void) printf("There are mounted logical drives. "
3559 			    "Committing changes now can cause data loss or "
3560 			    "corruption. Unmount all logical drives and then "
3561 			    "try committing the changes again.\n");
3562 			(void) printf("Press enter to continue.\n");
3563 			ext_read_input(s);
3564 			return (1);
3565 		}
3566 		(void) fdisk_delete_ext_part(epp);
3567 	} else {
3568 #endif
3569 		(void) printf(Q_LINE);
3570 		(void) printf("Are you sure you want to delete partition %d?"
3571 		    " This will make all files and \n", i + 1);
3572 		(void) printf("programs in this partition inaccessible (type"
3573 		    " \"y\" or \"n\"). ");
3574 
3575 		(void) printf(E_LINE);
3576 		if (! yesno()) {
3577 			return (1);
3578 		}
3579 #ifdef i386
3580 	}
3581 #endif
3582 
3583 	if (Table[i].bootid == ACTIVE) {
3584 		pactive = 1;
3585 	} else {
3586 		pactive = 0;
3587 	}
3588 
3589 	(void) memset(&Table[i], 0, sizeof (struct ipart));
3590 
3591 	(void) printf(E_LINE);
3592 	(void) printf("Partition %d has been deleted.", i + 1);
3593 
3594 	if (pactive) {
3595 		(void) printf(" This was the active partition.");
3596 	}
3597 
3598 	return (1);
3599 }
3600 
3601 /*
3602  * rm_blanks
3603  * Remove blanks from strings of user responses.
3604  */
3605 static void
3606 rm_blanks(char *s)
3607 {
3608 	register int i, j;
3609 
3610 	for (i = 0; i < CBUFLEN; i++) {
3611 		if ((s[i] == ' ') || (s[i] == '\t'))
3612 			continue;
3613 		else
3614 			/* Found first non-blank character of the string */
3615 			break;
3616 	}
3617 	for (j = 0; i < CBUFLEN; j++, i++) {
3618 		if ((s[j] = s[i]) == '\0') {
3619 			/* Reached end of string */
3620 			return;
3621 		}
3622 	}
3623 }
3624 
3625 /*
3626  * getcyl
3627  * Take the user-specified cylinder number and convert it from a
3628  * string to a decimal value.
3629  */
3630 static int
3631 getcyl(void)
3632 {
3633 int slen, i, j;
3634 unsigned int cyl;
3635 	(void) fgets(s, sizeof (s), stdin);
3636 	rm_blanks(s);
3637 	slen = strlen(s);
3638 	if (s[slen - 1] == '\n')
3639 		slen--;
3640 	j = 1;
3641 	cyl = 0;
3642 	for (i = slen - 1; i >= 0; i--) {
3643 		if (s[i] < '0' || s[i] > '9') {
3644 			return (-1);
3645 		}
3646 		cyl += (j * (s[i] - '0'));
3647 		j *= 10;
3648 	}
3649 	return (cyl);
3650 }
3651 
3652 /*
3653  * disptbl
3654  * Display the current fdisk table; determine percentage
3655  * of the disk used for each partition.
3656  */
3657 static void
3658 disptbl(void)
3659 {
3660 	int i;
3661 	unsigned int startcyl, endcyl, length, percent, remainder;
3662 	char *stat, *type;
3663 	int is_pmbr = 0;
3664 
3665 	if ((heads == 0) || (sectors == 0)) {
3666 		(void) printf("WARNING: critical disk geometry information"
3667 		    " missing!\n");
3668 		(void) printf("\theads = %d, sectors = %d\n", heads, sectors);
3669 		exit(1);
3670 	}
3671 
3672 	(void) printf(HOME);
3673 	(void) printf(T_LINE);
3674 	(void) printf("             Total disk size is %d cylinders\n", Numcyl);
3675 	(void) printf("             Cylinder size is %d (%d byte) blocks\n\n",
3676 	    heads * sectors, sectsiz);
3677 	(void) printf(
3678 	    "                                               Cylinders\n");
3679 	(void) printf(
3680 	    "      Partition   Status    Type          Start   End   Length"
3681 	    "    %%\n");
3682 	(void) printf(
3683 	    "      =========   ======    ============  =====   ===   ======"
3684 	    "   ===");
3685 
3686 
3687 	for (i = 0; i < FD_NUMPART; i++) {
3688 
3689 		if (Table[i].systid == UNUSED) {
3690 			continue;
3691 		}
3692 
3693 		if (Table[i].bootid == ACTIVE)
3694 			stat = Actvstr;
3695 		else
3696 			stat = NAstr;
3697 		switch (Table[i].systid) {
3698 		case UNIXOS:
3699 			type = Ustr;
3700 			break;
3701 		case SUNIXOS:
3702 			type = SUstr;
3703 #ifdef i386
3704 			if (fdisk_is_linux_swap(epp, Table[i].relsect,
3705 			    NULL) == 0)
3706 				type = LINSWAPstr;
3707 #endif
3708 			break;
3709 		case SUNIXOS2:
3710 			type = SU2str;
3711 			break;
3712 		case X86BOOT:
3713 			type = X86str;
3714 			break;
3715 		case DOSOS12:
3716 			type = Dstr;
3717 			break;
3718 		case DOSOS16:
3719 			type = D16str;
3720 			break;
3721 		case EXTDOS:
3722 			type = EDstr;
3723 			break;
3724 		case DOSDATA:
3725 			type = DDstr;
3726 			break;
3727 		case DOSHUGE:
3728 			type = DBstr;
3729 			break;
3730 		case PCIXOS:
3731 			type = PCstr;
3732 			break;
3733 		case DIAGPART:
3734 			type = DIAGstr;
3735 			break;
3736 		case FDISK_IFS:
3737 			type = IFSstr;
3738 			break;
3739 		case FDISK_AIXBOOT:
3740 			type = AIXstr;
3741 			break;
3742 		case FDISK_AIXDATA:
3743 			type = AIXDstr;
3744 			break;
3745 		case FDISK_OS2BOOT:
3746 			type = OS2str;
3747 			break;
3748 		case FDISK_WINDOWS:
3749 			type = WINstr;
3750 			break;
3751 		case FDISK_EXT_WIN:
3752 			type = EWINstr;
3753 			break;
3754 		case FDISK_FAT95:
3755 			type = FAT95str;
3756 			break;
3757 		case FDISK_EXTLBA:
3758 			type = EXTLstr;
3759 			break;
3760 		case FDISK_LINUX:
3761 			type = LINUXstr;
3762 			break;
3763 		case FDISK_CPM:
3764 			type = CPMstr;
3765 			break;
3766 		case FDISK_NOVELL2:
3767 			type = NOV2str;
3768 			break;
3769 		case FDISK_NOVELL3:
3770 			type = NOVstr;
3771 			break;
3772 		case FDISK_QNX4:
3773 			type = QNXstr;
3774 			break;
3775 		case FDISK_QNX42:
3776 			type = QNX2str;
3777 			break;
3778 		case FDISK_QNX43:
3779 			type = QNX3str;
3780 			break;
3781 		case FDISK_LINUXNAT:
3782 			type = LINNATstr;
3783 			break;
3784 		case FDISK_NTFSVOL1:
3785 			type = NTFSVOL1str;
3786 			break;
3787 		case FDISK_NTFSVOL2:
3788 			type = NTFSVOL2str;
3789 			break;
3790 		case FDISK_BSD:
3791 			type = BSDstr;
3792 			break;
3793 		case FDISK_NEXTSTEP:
3794 			type = NEXTSTEPstr;
3795 			break;
3796 		case FDISK_BSDIFS:
3797 			type = BSDIFSstr;
3798 			break;
3799 		case FDISK_BSDISWAP:
3800 			type = BSDISWAPstr;
3801 			break;
3802 		case EFI_PMBR:
3803 			type = EFIstr;
3804 			if (LE_32(Table[i].numsect) == DK_MAX_2TB)
3805 				is_pmbr = 1;
3806 
3807 			break;
3808 		default:
3809 			type = Ostr;
3810 			break;
3811 		}
3812 		startcyl = LE_32(Table[i].relsect) /
3813 		    (unsigned long)(heads * sectors);
3814 
3815 		if (LE_32(Table[i].numsect) == DK_MAX_2TB) {
3816 			endcyl = Numcyl - 1;
3817 			length = endcyl - startcyl + 1;
3818 		} else {
3819 			length = LE_32(Table[i].numsect) /
3820 			    (unsigned long)(heads * sectors);
3821 			if (LE_32(Table[i].numsect) %
3822 			    (unsigned long)(heads * sectors))
3823 				length++;
3824 			endcyl = startcyl + length - 1;
3825 		}
3826 
3827 		percent = length * 100 / Numcyl_usable;
3828 		if ((remainder = (length * 100 % Numcyl_usable)) != 0) {
3829 			if ((remainder * 100 / Numcyl_usable) > 50) {
3830 				/* round up */
3831 				percent++;
3832 			}
3833 			/* Else leave the percent as is since it's already */
3834 			/* rounded down */
3835 		}
3836 		if (percent > 100)
3837 			percent = 100;
3838 		(void) printf(
3839 		    "\n          %d       %s    %-12.12s   %4d  %4d    %4d"
3840 		    "    %3d",
3841 		    i + 1, stat, type, startcyl, endcyl, length, percent);
3842 	}
3843 
3844 	/* Print warning message if table is empty */
3845 	if (nopartdefined()) {
3846 		(void) printf(W_LINE);
3847 		(void) printf("WARNING: no partitions are defined!");
3848 	} else {
3849 		/* Clear the warning line */
3850 		(void) printf(W_LINE);
3851 
3852 		/* Print warning if disk > 2TB and is not EFI PMBR */
3853 		if (!is_pmbr && (dev_capacity > DK_MAX_2TB))
3854 			(void) printf("WARNING: Disk is larger than 2 TB. "
3855 			    "Upper limit is 2 TB for non-EFI partition ID\n");
3856 	}
3857 }
3858 
3859 /*
3860  * print_Table
3861  * Write the detailed fdisk table to standard error for
3862  * the selected disk device.
3863  */
3864 static void
3865 print_Table(void)
3866 {
3867 	int i;
3868 
3869 	(void) fprintf(stderr,
3870 	    "  SYSID ACT BHEAD BSECT BEGCYL   EHEAD ESECT ENDCYL   RELSECT"
3871 	    "   NUMSECT\n");
3872 
3873 	for (i = 0; i < FD_NUMPART; i++) {
3874 		(void) fprintf(stderr, "  %-5d ", Table[i].systid);
3875 		(void) fprintf(stderr, "%-3d ", Table[i].bootid);
3876 		(void) fprintf(stderr, "%-5d ", Table[i].beghead);
3877 		(void) fprintf(stderr, "%-5d ", Table[i].begsect & 0x3f);
3878 		(void) fprintf(stderr, "%-8d ",
3879 		    (((uint_t)Table[i].begsect & 0xc0) << 2) + Table[i].begcyl);
3880 
3881 		(void) fprintf(stderr, "%-5d ", Table[i].endhead);
3882 		(void) fprintf(stderr, "%-5d ", Table[i].endsect & 0x3f);
3883 		(void) fprintf(stderr, "%-8d ",
3884 		    (((uint_t)Table[i].endsect & 0xc0) << 2) + Table[i].endcyl);
3885 		(void) fprintf(stderr, "%-10u ", LE_32(Table[i].relsect));
3886 		(void) fprintf(stderr, "%-10u\n", LE_32(Table[i].numsect));
3887 
3888 	}
3889 }
3890 
3891 /*
3892  * copy_Table_to_Old_Table
3893  * Copy Table into Old_Table. The function only copies the systid,
3894  * numsect, relsect, and bootid values because they are the only
3895  * ones compared when determining if Table has changed.
3896  */
3897 static void
3898 copy_Table_to_Old_Table(void)
3899 {
3900 	int i;
3901 	for (i = 0; i < FD_NUMPART; i++)  {
3902 		(void) memcpy(&Old_Table[i], &Table[i], sizeof (Table[0]));
3903 	}
3904 }
3905 
3906 /*
3907  * nulltbl
3908  * Zero out the systid, numsect, relsect, and bootid values in the
3909  * fdisk table.
3910  */
3911 static void
3912 nulltbl(void)
3913 {
3914 	int i;
3915 
3916 	for (i = 0; i < FD_NUMPART; i++)  {
3917 		Table[i].systid = UNUSED;
3918 		Table[i].numsect = LE_32(UNUSED);
3919 		Table[i].relsect = LE_32(UNUSED);
3920 		Table[i].bootid = 0;
3921 		skip_verify[i] = 0;
3922 	}
3923 }
3924 
3925 /*
3926  * copy_Bootblk_to_Table
3927  * Copy the bytes from the boot record to an internal "Table".
3928  * All unused are padded with zeros starting at offset 446.
3929  */
3930 static void
3931 copy_Bootblk_to_Table(void)
3932 {
3933 	int i;
3934 	char *bootptr;
3935 	struct ipart iparts[FD_NUMPART];
3936 
3937 	/* Get an aligned copy of the partition tables */
3938 	(void) memcpy(iparts, Bootblk->parts, sizeof (iparts));
3939 	bootptr = (char *)iparts;	/* Points to start of partition table */
3940 	if (LE_16(Bootblk->signature) != MBB_MAGIC)  {
3941 		/* Signature is missing */
3942 		nulltbl();
3943 		(void) memcpy(Bootblk->bootinst, &BootCod, BOOTSZ);
3944 		return;
3945 	}
3946 	/*
3947 	 * When the DOS fdisk command deletes a partition, it is not
3948 	 * recognized by the old algorithm.  The algorithm that
3949 	 * follows looks at each entry in the Bootrec and copies all
3950 	 * those that are valid.
3951 	 */
3952 	for (i = 0; i < FD_NUMPART; i++) {
3953 		if (iparts[i].systid == 0) {
3954 			/* Null entry */
3955 			(void) memset(&Table[i], 0, sizeof (struct ipart));
3956 		} else {
3957 			fill_ipart(bootptr, &Table[i]);
3958 		}
3959 		bootptr += sizeof (struct ipart);
3960 	}
3961 
3962 	/* For now, always replace the bootcode with ours */
3963 	(void) memcpy(Bootblk->bootinst, &BootCod, BOOTSZ);
3964 	copy_Table_to_Bootblk();
3965 }
3966 
3967 /*
3968  * fill_ipart
3969  * Initialize ipart structure values.
3970  */
3971 static void
3972 fill_ipart(char *bootptr, struct ipart *partp)
3973 {
3974 #ifdef sparc
3975 	/* Packing struct ipart for Sparc */
3976 	partp->bootid	= getbyte(&bootptr);
3977 	partp->beghead	= getbyte(&bootptr);
3978 	partp->begsect	= getbyte(&bootptr);
3979 	partp->begcyl	= getbyte(&bootptr);
3980 	partp->systid	= getbyte(&bootptr);
3981 	partp->endhead	= getbyte(&bootptr);
3982 	partp->endsect	= getbyte(&bootptr);
3983 	partp->endcyl	= getbyte(&bootptr);
3984 	partp->relsect	= (int32_t)getlong(&bootptr);
3985 	partp->numsect	= (int32_t)getlong(&bootptr);
3986 #else
3987 	*partp = *(struct ipart *)bootptr;
3988 #endif
3989 }
3990 
3991 /*
3992  * getbyte, getlong
3993  * 	Get a byte, a short, or a long (SPARC only).
3994  */
3995 #ifdef sparc
3996 uchar_t
3997 getbyte(char **bp)
3998 {
3999 	uchar_t	b;
4000 
4001 	b = (uchar_t)**bp;
4002 	*bp = *bp + 1;
4003 	return (b);
4004 }
4005 
4006 uint32_t
4007 getlong(char **bp)
4008 {
4009 	int32_t	b, bh, bl;
4010 
4011 	bh = ((**bp) << 8) | *(*bp + 1);
4012 	*bp += 2;
4013 	bl = ((**bp) << 8) | *(*bp + 1);
4014 	*bp += 2;
4015 
4016 	b = (bh << 16) | bl;
4017 	return ((uint32_t)b);
4018 }
4019 #endif
4020 
4021 /*
4022  * copy_Table_to_Bootblk
4023  * Copy the table into the boot record. Note that the unused
4024  * entries will always be the last ones in the table and they are
4025  * marked with 100 in sysind. The the unused portion of the table
4026  * is padded with zeros in the bytes after the used entries.
4027  */
4028 static void
4029 copy_Table_to_Bootblk(void)
4030 {
4031 	struct ipart *boot_ptr, *tbl_ptr;
4032 
4033 	boot_ptr = (struct ipart *)Bootblk->parts;
4034 	tbl_ptr = (struct ipart *)&Table[0].bootid;
4035 	for (; tbl_ptr < (struct ipart *)&Table[FD_NUMPART].bootid;
4036 	    tbl_ptr++, boot_ptr++) {
4037 		if (tbl_ptr->systid == UNUSED)
4038 			(void) memset(boot_ptr, 0, sizeof (struct ipart));
4039 		else
4040 			(void) memcpy(boot_ptr, tbl_ptr, sizeof (struct ipart));
4041 	}
4042 	Bootblk->signature = LE_16(MBB_MAGIC);
4043 }
4044 
4045 /*
4046  * TableChanged
4047  * 	Check for any changes in the partition table.
4048  */
4049 static int
4050 TableChanged(void)
4051 {
4052 	int i, changed;
4053 
4054 	changed = 0;
4055 	for (i = 0; i < FD_NUMPART; i++) {
4056 		if (memcmp(&Old_Table[i], &Table[i], sizeof (Table[0])) != 0) {
4057 			/* Partition table changed, write back to disk */
4058 			changed = 1;
4059 		}
4060 	}
4061 
4062 	return (changed);
4063 }
4064 
4065 /*
4066  * ffile_write
4067  * 	Display contents of partition table to standard output or
4068  *	another file name without writing it to the disk (-W file).
4069  */
4070 static void
4071 ffile_write(char *file)
4072 {
4073 	register int	i;
4074 	FILE *fp;
4075 
4076 	/*
4077 	 * If file isn't standard output, then it's a file name.
4078 	 * Open file and write it.
4079 	 */
4080 	if (file != (char *)stdout) {
4081 		if ((fp = fopen(file, "w")) == NULL) {
4082 			(void) fprintf(stderr,
4083 			    "fdisk: Cannot open output file %s.\n",
4084 			    file);
4085 			exit(1);
4086 		}
4087 	}
4088 	else
4089 		fp = stdout;
4090 
4091 	/*
4092 	 * Write the fdisk table information
4093 	 */
4094 	(void) fprintf(fp, "\n* %s default fdisk table\n", Dfltdev);
4095 	(void) fprintf(fp, "* Dimensions:\n");
4096 	(void) fprintf(fp, "*   %4d bytes/sector\n", sectsiz);
4097 	(void) fprintf(fp, "*   %4d sectors/track\n", sectors);
4098 	(void) fprintf(fp, "*   %4d tracks/cylinder\n", heads);
4099 	(void) fprintf(fp, "*   %4d cylinders\n", Numcyl);
4100 	(void) fprintf(fp, "*\n");
4101 	/* Write virtual (HBA) geometry, if required	*/
4102 	if (v_flag) {
4103 		(void) fprintf(fp, "* HBA Dimensions:\n");
4104 		(void) fprintf(fp, "*   %4d bytes/sector\n", sectsiz);
4105 		(void) fprintf(fp, "*   %4d sectors/track\n", hba_sectors);
4106 		(void) fprintf(fp, "*   %4d tracks/cylinder\n", hba_heads);
4107 		(void) fprintf(fp, "*   %4d cylinders\n", hba_Numcyl);
4108 		(void) fprintf(fp, "*\n");
4109 	}
4110 	(void) fprintf(fp, "* systid:\n");
4111 	(void) fprintf(fp, "*    1: DOSOS12\n");
4112 	(void) fprintf(fp, "*    2: PCIXOS\n");
4113 	(void) fprintf(fp, "*    4: DOSOS16\n");
4114 	(void) fprintf(fp, "*    5: EXTDOS\n");
4115 	(void) fprintf(fp, "*    6: DOSBIG\n");
4116 	(void) fprintf(fp, "*    7: FDISK_IFS\n");
4117 	(void) fprintf(fp, "*    8: FDISK_AIXBOOT\n");
4118 	(void) fprintf(fp, "*    9: FDISK_AIXDATA\n");
4119 	(void) fprintf(fp, "*   10: FDISK_0S2BOOT\n");
4120 	(void) fprintf(fp, "*   11: FDISK_WINDOWS\n");
4121 	(void) fprintf(fp, "*   12: FDISK_EXT_WIN\n");
4122 	(void) fprintf(fp, "*   14: FDISK_FAT95\n");
4123 	(void) fprintf(fp, "*   15: FDISK_EXTLBA\n");
4124 	(void) fprintf(fp, "*   18: DIAGPART\n");
4125 	(void) fprintf(fp, "*   65: FDISK_LINUX\n");
4126 	(void) fprintf(fp, "*   82: FDISK_CPM\n");
4127 	(void) fprintf(fp, "*   86: DOSDATA\n");
4128 	(void) fprintf(fp, "*   98: OTHEROS\n");
4129 	(void) fprintf(fp, "*   99: UNIXOS\n");
4130 	(void) fprintf(fp, "*  100: FDISK_NOVELL2\n");
4131 	(void) fprintf(fp, "*  101: FDISK_NOVELL3\n");
4132 	(void) fprintf(fp, "*  119: FDISK_QNX4\n");
4133 	(void) fprintf(fp, "*  120: FDISK_QNX42\n");
4134 	(void) fprintf(fp, "*  121: FDISK_QNX43\n");
4135 	(void) fprintf(fp, "*  130: SUNIXOS\n");
4136 	(void) fprintf(fp, "*  131: FDISK_LINUXNAT\n");
4137 	(void) fprintf(fp, "*  134: FDISK_NTFSVOL1\n");
4138 	(void) fprintf(fp, "*  135: FDISK_NTFSVOL2\n");
4139 	(void) fprintf(fp, "*  165: FDISK_BSD\n");
4140 	(void) fprintf(fp, "*  167: FDISK_NEXTSTEP\n");
4141 	(void) fprintf(fp, "*  183: FDISK_BSDIFS\n");
4142 	(void) fprintf(fp, "*  184: FDISK_BSDISWAP\n");
4143 	(void) fprintf(fp, "*  190: X86BOOT\n");
4144 	(void) fprintf(fp, "*  191: SUNIXOS2\n");
4145 	(void) fprintf(fp, "*  238: EFI_PMBR\n");
4146 	(void) fprintf(fp, "*  239: EFI_FS\n");
4147 	(void) fprintf(fp, "*\n");
4148 	(void) fprintf(fp,
4149 	    "\n* Id    Act  Bhead  Bsect  Bcyl    Ehead  Esect  Ecyl"
4150 	    "    Rsect      Numsect\n");
4151 
4152 	for (i = 0; i < FD_NUMPART; i++) {
4153 		(void) fprintf(fp,
4154 		    "  %-5d %-4d %-6d %-6d %-7d %-6d %-6d %-7d %-10u"
4155 		    " %-10u\n",
4156 		    Table[i].systid,
4157 		    Table[i].bootid,
4158 		    Table[i].beghead,
4159 		    Table[i].begsect & 0x3f,
4160 		    ((Table[i].begcyl & 0xff) | ((Table[i].begsect &
4161 		    0xc0) << 2)),
4162 		    Table[i].endhead,
4163 		    Table[i].endsect & 0x3f,
4164 		    ((Table[i].endcyl & 0xff) | ((Table[i].endsect &
4165 		    0xc0) << 2)),
4166 		    LE_32(Table[i].relsect),
4167 		    LE_32(Table[i].numsect));
4168 	}
4169 #ifdef i386
4170 	if (fdisk_ext_part_exists(epp)) {
4171 		struct ipart ext_tab;
4172 		logical_drive_t *temp;
4173 		uint32_t rsect, numsect, tempsect = 0;
4174 		for (temp = fdisk_get_ld_head(epp); temp != NULL;
4175 		    temp = temp->next) {
4176 			ext_tab = temp->parts[0];
4177 			rsect = tempsect + LE_32(ext_tab.relsect) +
4178 			    fdisk_get_ext_beg_sec(epp);
4179 			numsect = LE_32(ext_tab.numsect);
4180 			tempsect = LE_32(temp->parts[1].relsect);
4181 			(void) fprintf(fp,
4182 			    "  %-5d %-4d %-6d %-6d %-7d %-6d %-6d "
4183 			    "%-7d %-8u %-8u\n",
4184 			    ext_tab.systid,
4185 			    ext_tab.bootid,
4186 			    ext_tab.beghead,
4187 			    ext_tab.begsect & 0x3f,
4188 			    ((ext_tab.begcyl & 0xff) |
4189 			    ((ext_tab.begsect & 0xc0) << 2)),
4190 			    ext_tab.endhead,
4191 			    ext_tab.endsect & 0x3f,
4192 			    ((ext_tab.endcyl & 0xff) |
4193 			    ((ext_tab.endsect & 0xc0) << 2)),
4194 			    rsect,
4195 			    numsect);
4196 		}
4197 	}
4198 #endif
4199 
4200 	if (fp != stdout)
4201 		(void) fclose(fp);
4202 }
4203 
4204 /*
4205  * fix_slice
4206  * 	Read the VTOC table on the Solaris partition and check that no
4207  *	slices exist that extend past the end of the Solaris partition.
4208  *	If no Solaris partition exists, nothing is done.
4209  */
4210 static void
4211 fix_slice(void)
4212 {
4213 	int	i;
4214 	uint32_t	numsect;
4215 
4216 	if (io_image) {
4217 		return;
4218 	}
4219 
4220 	for (i = 0; i < FD_NUMPART; i++) {
4221 		if (Table[i].systid == SUNIXOS || Table[i].systid == SUNIXOS2) {
4222 			/*
4223 			 * Only the size matters (not starting point), since
4224 			 * VTOC entries are relative to the start of
4225 			 * the partition.
4226 			 */
4227 			numsect = LE_32(Table[i].numsect);
4228 			break;
4229 		}
4230 	}
4231 
4232 	if (i >= FD_NUMPART) {
4233 		if (!io_nifdisk) {
4234 			(void) fprintf(stderr,
4235 			    "fdisk: No Solaris partition found - VTOC not"
4236 			    " checked.\n");
4237 		}
4238 		return;
4239 	}
4240 
4241 	if (readvtoc() != VTOC_OK) {
4242 		exit(1);		/* Failed to read the VTOC */
4243 	}
4244 	for (i = 0; i < V_NUMPAR; i++) {
4245 		/* Special case for slice two (entire disk) */
4246 		if (i == 2) {
4247 			if (disk_vtoc.v_part[i].p_start != 0) {
4248 				(void) fprintf(stderr,
4249 				    "slice %d starts at %llu, is not at"
4250 				    " start of partition",
4251 				    i, disk_vtoc.v_part[i].p_start);
4252 				if (!io_nifdisk) {
4253 					(void) printf(" adjust ?:");
4254 					if (yesno())
4255 						disk_vtoc.v_part[i].p_start = 0;
4256 				} else {
4257 					disk_vtoc.v_part[i].p_start = 0;
4258 					(void) fprintf(stderr, " adjusted!\n");
4259 				}
4260 
4261 			}
4262 			if (disk_vtoc.v_part[i].p_size != numsect) {
4263 				(void) fprintf(stderr,
4264 				    "slice %d size %llu does not cover"
4265 				    " complete partition",
4266 				    i, disk_vtoc.v_part[i].p_size);
4267 				if (!io_nifdisk) {
4268 					(void) printf(" adjust ?:");
4269 					if (yesno())
4270 						disk_vtoc.v_part[i].p_size =
4271 						    numsect;
4272 				} else {
4273 					disk_vtoc.v_part[i].p_size = numsect;
4274 					(void) fprintf(stderr, " adjusted!\n");
4275 				}
4276 			}
4277 			if (disk_vtoc.v_part[i].p_tag != V_BACKUP) {
4278 				(void) fprintf(stderr,
4279 				    "slice %d tag was %d should be %d",
4280 				    i, disk_vtoc.v_part[i].p_tag,
4281 				    V_BACKUP);
4282 				if (!io_nifdisk) {
4283 					(void) printf(" fix ?:");
4284 					if (yesno())
4285 						disk_vtoc.v_part[i].p_tag =
4286 						    V_BACKUP;
4287 				} else {
4288 					disk_vtoc.v_part[i].p_tag = V_BACKUP;
4289 					(void) fprintf(stderr, " fixed!\n");
4290 				}
4291 			}
4292 			continue;
4293 		}
4294 		if (io_ADJT) {
4295 			if (disk_vtoc.v_part[i].p_start > numsect ||
4296 			    disk_vtoc.v_part[i].p_start +
4297 			    disk_vtoc.v_part[i].p_size > numsect) {
4298 				(void) fprintf(stderr,
4299 				    "slice %d (start %llu, end %llu)"
4300 				    " is larger than the partition",
4301 				    i, disk_vtoc.v_part[i].p_start,
4302 				    disk_vtoc.v_part[i].p_start +
4303 				    disk_vtoc.v_part[i].p_size);
4304 				if (!io_nifdisk) {
4305 					(void) printf(" remove ?:");
4306 					if (yesno()) {
4307 						disk_vtoc.v_part[i].p_size = 0;
4308 						disk_vtoc.v_part[i].p_start = 0;
4309 						disk_vtoc.v_part[i].p_tag = 0;
4310 						disk_vtoc.v_part[i].p_flag = 0;
4311 					}
4312 				} else {
4313 					disk_vtoc.v_part[i].p_size = 0;
4314 					disk_vtoc.v_part[i].p_start = 0;
4315 					disk_vtoc.v_part[i].p_tag = 0;
4316 					disk_vtoc.v_part[i].p_flag = 0;
4317 					(void) fprintf(stderr,
4318 					    " removed!\n");
4319 				}
4320 			}
4321 			continue;
4322 		}
4323 		if (disk_vtoc.v_part[i].p_start > numsect) {
4324 			(void) fprintf(stderr,
4325 			    "slice %d (start %llu) is larger than the "
4326 			    "partition", i, disk_vtoc.v_part[i].p_start);
4327 			if (!io_nifdisk) {
4328 				(void) printf(" remove ?:");
4329 				if (yesno()) {
4330 					disk_vtoc.v_part[i].p_size = 0;
4331 					disk_vtoc.v_part[i].p_start = 0;
4332 					disk_vtoc.v_part[i].p_tag = 0;
4333 					disk_vtoc.v_part[i].p_flag = 0;
4334 				}
4335 			} else {
4336 				disk_vtoc.v_part[i].p_size = 0;
4337 				disk_vtoc.v_part[i].p_start = 0;
4338 				disk_vtoc.v_part[i].p_tag = 0;
4339 				disk_vtoc.v_part[i].p_flag = 0;
4340 				(void) fprintf(stderr,
4341 				" removed!\n");
4342 			}
4343 		} else if (disk_vtoc.v_part[i].p_start
4344 		    + disk_vtoc.v_part[i].p_size > numsect) {
4345 			(void) fprintf(stderr,
4346 			    "slice %d (end %llu) is larger"
4347 			    " than the partition",
4348 			    i,
4349 			    disk_vtoc.v_part[i].p_start +
4350 			    disk_vtoc.v_part[i].p_size);
4351 			if (!io_nifdisk) {
4352 				(void) printf(" adjust ?:");
4353 				if (yesno()) {
4354 					disk_vtoc.v_part[i].p_size = numsect;
4355 				}
4356 			} else {
4357 				disk_vtoc.v_part[i].p_size = numsect;
4358 				(void) fprintf(stderr, " adjusted!\n");
4359 			}
4360 		}
4361 	}
4362 #if 1		/* bh for now */
4363 	/* Make the VTOC look sane - ha ha */
4364 	disk_vtoc.v_version = V_VERSION;
4365 	disk_vtoc.v_sanity = VTOC_SANE;
4366 	disk_vtoc.v_nparts = V_NUMPAR;
4367 	if (disk_vtoc.v_sectorsz == 0)
4368 		disk_vtoc.v_sectorsz = NBPSCTR;
4369 #endif
4370 
4371 	/* Write the VTOC back to the disk */
4372 	if (!io_readonly)
4373 		(void) writevtoc();
4374 }
4375 
4376 /*
4377  * yesno
4378  * Get yes or no answer. Return 1 for yes and 0 for no.
4379  */
4380 
4381 static int
4382 yesno(void)
4383 {
4384 	char	s[80];
4385 
4386 	for (;;) {
4387 		(void) fgets(s, sizeof (s), stdin);
4388 		rm_blanks(s);
4389 		if (((s[1] != '\0') && (s[1] != '\n')) ||
4390 		    ((s[0] != 'y') && (s[0] != 'n'))) {
4391 			(void) printf(E_LINE);
4392 			(void) printf("Please answer with \"y\" or \"n\": ");
4393 			continue;
4394 		}
4395 		if (s[0] == 'y')
4396 			return (1);
4397 		else
4398 			return (0);
4399 	}
4400 }
4401 
4402 /*
4403  * readvtoc
4404  * 	Read the VTOC from the Solaris partition of the device.
4405  */
4406 static int
4407 readvtoc(void)
4408 {
4409 	int	i;
4410 	int	retval = VTOC_OK;
4411 
4412 	if ((i = read_extvtoc(Dev, &disk_vtoc)) < VTOC_OK) {
4413 		if (i == VT_EINVAL) {
4414 			(void) fprintf(stderr, "fdisk: Invalid VTOC.\n");
4415 			vt_inval++;
4416 			retval = VTOC_INVAL;
4417 		} else if (i == VT_ENOTSUP) {
4418 			(void) fprintf(stderr, "fdisk: partition may have EFI "
4419 			    "GPT\n");
4420 			retval = VTOC_NOTSUP;
4421 		} else {
4422 			(void) fprintf(stderr, "fdisk: Cannot read VTOC.\n");
4423 			retval = VTOC_RWERR;
4424 		}
4425 	}
4426 	return (retval);
4427 }
4428 
4429 /*
4430  * writevtoc
4431  * 	Write the VTOC to the Solaris partition on the device.
4432  */
4433 static int
4434 writevtoc(void)
4435 {
4436 	int	i;
4437 	int	retval = 0;
4438 
4439 	if ((i = write_extvtoc(Dev, &disk_vtoc)) != 0) {
4440 		if (i == VT_EINVAL) {
4441 			(void) fprintf(stderr,
4442 			    "fdisk: Invalid entry exists in VTOC.\n");
4443 			retval = VTOC_INVAL;
4444 		} else if (i == VT_ENOTSUP) {
4445 			(void) fprintf(stderr, "fdisk: partition may have EFI "
4446 			    "GPT\n");
4447 			retval = VTOC_NOTSUP;
4448 		} else {
4449 			(void) fprintf(stderr, "fdisk: Cannot write VTOC.\n");
4450 			retval = VTOC_RWERR;
4451 		}
4452 	}
4453 	return (retval);
4454 }
4455 
4456 /*
4457  * efi_ioctl
4458  * issues DKIOCSETEFI IOCTL
4459  * (duplicate of private efi_ioctl() in rdwr_efi.c
4460  */
4461 static int
4462 efi_ioctl(int fd, int cmd, dk_efi_t *dk_ioc)
4463 {
4464 	void *data = dk_ioc->dki_data;
4465 	int error;
4466 
4467 	dk_ioc->dki_data_64 = (uintptr_t)data;
4468 	error = ioctl(fd, cmd, (void *)dk_ioc);
4469 
4470 	return (error);
4471 }
4472 
4473 /*
4474  * clear_efi
4475  * Clear EFI labels from the EFI_PMBR partition on the device
4476  * This function is modeled on the libefi(3LIB) call efi_write()
4477  */
4478 static int
4479 clear_efi(void)
4480 {
4481 	struct dk_gpt	*efi_vtoc;
4482 	dk_efi_t	dk_ioc;
4483 
4484 	/*
4485 	 * see if we can read the EFI label
4486 	 */
4487 	if (efi_alloc_and_read(Dev, &efi_vtoc) < 0) {
4488 		return (VT_ERROR);
4489 	}
4490 
4491 	/*
4492 	 * set up the dk_ioc structure for writing
4493 	 */
4494 	dk_ioc.dki_lba = 1;
4495 	dk_ioc.dki_length = EFI_MIN_ARRAY_SIZE + efi_vtoc->efi_lbasize;
4496 
4497 	if ((dk_ioc.dki_data = calloc(dk_ioc.dki_length, 1)) == NULL) {
4498 		return (VT_ERROR);
4499 	}
4500 
4501 	/*
4502 	 * clear the primary label
4503 	 */
4504 	if (io_debug) {
4505 		(void) fprintf(stderr,
4506 		    "\tClearing primary EFI label at block %lld\n",
4507 		    dk_ioc.dki_lba);
4508 	}
4509 
4510 	if (efi_ioctl(Dev, DKIOCSETEFI, &dk_ioc) == -1) {
4511 		free(dk_ioc.dki_data);
4512 		switch (errno) {
4513 			case EIO:
4514 				return (VT_EIO);
4515 			case EINVAL:
4516 				return (VT_EINVAL);
4517 			default:
4518 				return (VT_ERROR);
4519 		}
4520 	}
4521 
4522 	/*
4523 	 * clear the backup partition table
4524 	 */
4525 	dk_ioc.dki_lba = efi_vtoc->efi_last_u_lba + 1;
4526 	dk_ioc.dki_length -= efi_vtoc->efi_lbasize;
4527 	dk_ioc.dki_data = (efi_gpt_t *)((char *)dk_ioc.dki_data +
4528 	    efi_vtoc->efi_lbasize);
4529 	if (io_debug) {
4530 		(void) fprintf(stderr,
4531 		    "\tClearing backup partition table at block %lld\n",
4532 		    dk_ioc.dki_lba);
4533 	}
4534 
4535 	if (efi_ioctl(Dev, DKIOCSETEFI, &dk_ioc) == -1) {
4536 		(void) fprintf(stderr, "\tUnable to clear backup EFI label at "
4537 		    "block %llu; errno %d\n", efi_vtoc->efi_last_u_lba + 1,
4538 		    errno);
4539 	}
4540 
4541 	/*
4542 	 * clear the backup label
4543 	 */
4544 	dk_ioc.dki_lba = efi_vtoc->efi_last_lba;
4545 	dk_ioc.dki_length = efi_vtoc->efi_lbasize;
4546 	dk_ioc.dki_data = (efi_gpt_t *)((char *)dk_ioc.dki_data -
4547 	    efi_vtoc->efi_lbasize);
4548 	if (io_debug) {
4549 		(void) fprintf(stderr, "\tClearing backup label at block "
4550 		    "%lld\n", dk_ioc.dki_lba);
4551 	}
4552 
4553 	if (efi_ioctl(Dev, DKIOCSETEFI, &dk_ioc) == -1) {
4554 		(void) fprintf(stderr,
4555 		    "\tUnable to clear backup EFI label at "
4556 		    "block %llu; errno %d\n",
4557 		    efi_vtoc->efi_last_lba,
4558 		    errno);
4559 	}
4560 
4561 	free(dk_ioc.dki_data);
4562 	efi_free(efi_vtoc);
4563 
4564 	return (0);
4565 }
4566 
4567 /*
4568  * clear_vtoc
4569  * 	Clear the VTOC from the current or previous Solaris partition on the
4570  *      device.
4571  */
4572 static void
4573 clear_vtoc(int table, int part)
4574 {
4575 	struct ipart *clr_table;
4576 	char *disk_label;
4577 	uint32_t pcyl, ncyl, count;
4578 	diskaddr_t backup_block, solaris_offset;
4579 	ssize_t bytes;
4580 	off_t seek_byte;
4581 
4582 #ifdef DEBUG
4583 	char *read_label;
4584 #endif /* DEBUG */
4585 
4586 	if (table == OLD) {
4587 		clr_table = &Old_Table[part];
4588 	} else {
4589 		clr_table = &Table[part];
4590 	}
4591 
4592 	disk_label = (char *)calloc(sectsiz, 1);
4593 	if (disk_label == NULL) {
4594 		return;
4595 	}
4596 
4597 	seek_byte = (off_t)(LE_32(clr_table->relsect) + VTOC_OFFSET) * sectsiz;
4598 
4599 	if (io_debug) {
4600 		(void) fprintf(stderr,
4601 		    "\tClearing primary VTOC at byte %llu (block %llu)\n",
4602 		    (uint64_t)seek_byte,
4603 		    (uint64_t)(LE_32(clr_table->relsect) + VTOC_OFFSET));
4604 	}
4605 
4606 	if (lseek(Dev, seek_byte, SEEK_SET) == -1) {
4607 		(void) fprintf(stderr,
4608 		    "\tError seeking to primary label at byte %llu\n",
4609 		    (uint64_t)seek_byte);
4610 		free(disk_label);
4611 		return;
4612 	}
4613 
4614 	bytes = write(Dev, disk_label, sectsiz);
4615 
4616 	if (bytes != sectsiz) {
4617 		(void) fprintf(stderr,
4618 		    "\tWarning: only %d bytes written to clear primary"
4619 		    " VTOC!\n", bytes);
4620 	}
4621 
4622 #ifdef DEBUG
4623 	if (lseek(Dev, seek_byte, SEEK_SET) == -1) {
4624 		(void) fprintf(stderr,
4625 		    "DEBUG: Error seeking to primary label at byte %llu\n",
4626 		    (uint64_t)seek_byte);
4627 		free(disk_label);
4628 		return;
4629 	} else {
4630 		(void) fprintf(stderr,
4631 		    "DEBUG: Successful lseek() to byte %llu\n",
4632 		    (uint64_t)seek_byte);
4633 	}
4634 
4635 	read_label = (char *)calloc(sectsiz, 1);
4636 	if (read_label == NULL) {
4637 		free(disk_label);
4638 		return;
4639 	}
4640 
4641 	bytes = read(Dev, read_label, sectsiz);
4642 
4643 	if (bytes != sectsiz) {
4644 		(void) fprintf(stderr,
4645 		    "DEBUG: Warning: only %d bytes read of label\n",
4646 		    bytes);
4647 	}
4648 
4649 	if (memcmp(disk_label, read_label, sectsiz) != 0) {
4650 		(void) fprintf(stderr,
4651 		    "DEBUG: Warning: disk_label and read_label differ!!!\n");
4652 	} else {
4653 		(void) fprintf(stderr, "DEBUG Good compare of disk_label and "
4654 		    "read_label\n");
4655 	}
4656 #endif /* DEBUG */
4657 
4658 	/* Clear backup label */
4659 	pcyl = LE_32(clr_table->numsect) / (heads * sectors);
4660 	solaris_offset = LE_32(clr_table->relsect);
4661 	ncyl = pcyl - acyl;
4662 
4663 	backup_block = ((ncyl + acyl - 1) *
4664 	    (heads * sectors)) + ((heads - 1) * sectors) + 1;
4665 
4666 	for (count = 1; count < 6; count++) {
4667 		seek_byte = (off_t)(solaris_offset + backup_block) * sectsiz;
4668 
4669 		if (lseek(Dev, seek_byte, SEEK_SET) == -1) {
4670 			(void) fprintf(stderr,
4671 			    "\tError seeking to backup label at byte %llu on "
4672 			    "%s.\n", (uint64_t)seek_byte, Dfltdev);
4673 			free(disk_label);
4674 #ifdef DEBUG
4675 			free(read_label);
4676 #endif /* DEBUG */
4677 			return;
4678 		}
4679 
4680 		if (io_debug) {
4681 			(void) fprintf(stderr, "\tClearing backup VTOC at"
4682 			    " byte %llu (block %llu)\n",
4683 			    (uint64_t)seek_byte,
4684 			    (uint64_t)(solaris_offset + backup_block));
4685 		}
4686 
4687 		bytes = write(Dev, disk_label, sectsiz);
4688 
4689 		if (bytes != sectsiz) {
4690 			(void) fprintf(stderr,
4691 			    "\t\tWarning: only %d bytes written to "
4692 			    "clear backup VTOC at block %llu!\n", bytes,
4693 			    (uint64_t)(solaris_offset + backup_block));
4694 		}
4695 
4696 #ifdef DEBUG
4697 	if (lseek(Dev, seek_byte, SEEK_SET) == -1) {
4698 		(void) fprintf(stderr,
4699 		    "DEBUG: Error seeking to backup label at byte %llu\n",
4700 		    (uint64_t)seek_byte);
4701 		free(disk_label);
4702 		free(read_label);
4703 		return;
4704 	} else {
4705 		(void) fprintf(stderr,
4706 		    "DEBUG: Successful lseek() to byte %llu\n",
4707 		    (uint64_t)seek_byte);
4708 	}
4709 
4710 	bytes = read(Dev, read_label, sectsiz);
4711 
4712 	if (bytes != sectsiz) {
4713 		(void) fprintf(stderr,
4714 		    "DEBUG: Warning: only %d bytes read of backup label\n",
4715 		    bytes);
4716 	}
4717 
4718 	if (memcmp(disk_label, read_label, sectsiz) != 0) {
4719 		(void) fprintf(stderr,
4720 		    "DEBUG: Warning: disk_label and read_label differ!!!\n");
4721 	} else {
4722 		(void) fprintf(stderr,
4723 		    "DEBUG: Good compare of disk_label and backup "
4724 		    "read_label\n");
4725 	}
4726 
4727 #endif /* DEBUG */
4728 
4729 		backup_block += 2;
4730 	}
4731 
4732 #ifdef DEBUG
4733 	free(read_label);
4734 #endif /* DEBUG */
4735 	free(disk_label);
4736 }
4737 
4738 #define	FDISK_STANDARD_LECTURE \
4739 	"Fdisk is normally used with the device that " \
4740 	"represents the entire fixed disk.\n" \
4741 	"(For example, /dev/rdsk/c0d0p0 on x86 or " \
4742 	"/dev/rdsk/c0t5d0s2 on sparc).\n"
4743 
4744 #define	FDISK_LECTURE_NOT_SECTOR_ZERO \
4745 	"The device does not appear to include absolute\n" \
4746 	"sector 0 of the PHYSICAL disk " \
4747 	"(the normal location for an fdisk table).\n"
4748 
4749 #define	FDISK_LECTURE_NOT_FULL \
4750 	"The device does not appear to encompass the entire PHYSICAL disk.\n"
4751 
4752 #define	FDISK_LECTURE_NO_VTOC \
4753 	"Unable to find a volume table of contents.\n" \
4754 	"Cannot verify the device encompasses the full PHYSICAL disk.\n"
4755 
4756 #define	FDISK_LECTURE_NO_GEOM \
4757 	"Unable to get geometry from device.\n" \
4758 	"Cannot verify the device encompasses the full PHYSICAL disk.\n"
4759 
4760 #define	FDISK_SHALL_I_CONTINUE \
4761 	"Are you sure you want to continue? (y/n) "
4762 
4763 /*
4764  *  lecture_and_query
4765  *	Called when a sanity check fails.  This routine gives a warning
4766  *	specific to the check that fails, followed by a generic lecture
4767  *	about the "right" device to supply as input.  Then, if appropriate,
4768  *	it will prompt the user on whether or not they want to continue.
4769  *	Inappropriate times for prompting are when the user has selected
4770  *	non-interactive mode or read-only mode.
4771  */
4772 static int
4773 lecture_and_query(char *warning, char *devname)
4774 {
4775 	if (io_nifdisk)
4776 		return (0);
4777 
4778 	(void) fprintf(stderr, "WARNING: Device %s: \n", devname);
4779 	(void) fprintf(stderr, "%s", warning);
4780 	(void) fprintf(stderr, FDISK_STANDARD_LECTURE);
4781 	(void) fprintf(stderr, FDISK_SHALL_I_CONTINUE);
4782 
4783 	return (yesno());
4784 }
4785 
4786 static void
4787 sanity_check_provided_device(char *devname, int fd)
4788 {
4789 	struct extvtoc v;
4790 	struct dk_geom d;
4791 	struct part_info pi;
4792 	struct extpart_info extpi;
4793 	diskaddr_t totsize;
4794 	int idx = -1;
4795 
4796 	/*
4797 	 *  First try the PARTINFO ioctl.  If it works, we will be able
4798 	 *  to tell if they've specified the full disk partition by checking
4799 	 *  to see if they've specified a partition that starts at sector 0.
4800 	 */
4801 	if (ioctl(fd, DKIOCEXTPARTINFO, &extpi) != -1) {
4802 		if (extpi.p_start != 0) {
4803 			if (!lecture_and_query(FDISK_LECTURE_NOT_SECTOR_ZERO,
4804 			    devname)) {
4805 				(void) close(fd);
4806 				exit(1);
4807 			}
4808 		}
4809 	} else if (ioctl(fd, DKIOCPARTINFO, &pi) != -1) {
4810 		if (pi.p_start != 0) {
4811 			if (!lecture_and_query(FDISK_LECTURE_NOT_SECTOR_ZERO,
4812 			    devname)) {
4813 				(void) close(fd);
4814 				exit(1);
4815 			}
4816 		}
4817 	} else {
4818 		if ((idx = read_extvtoc(fd, &v)) < 0) {
4819 			if (!lecture_and_query(FDISK_LECTURE_NO_VTOC,
4820 			    devname)) {
4821 				(void) close(fd);
4822 				exit(1);
4823 			}
4824 			return;
4825 		}
4826 		if (ioctl(fd, DKIOCGGEOM, &d) == -1) {
4827 			perror(devname);
4828 			if (!lecture_and_query(FDISK_LECTURE_NO_GEOM,
4829 			    devname)) {
4830 				(void) close(fd);
4831 				exit(1);
4832 			}
4833 			return;
4834 		}
4835 		totsize = (diskaddr_t)d.dkg_ncyl * d.dkg_nhead * d.dkg_nsect;
4836 		if (v.v_part[idx].p_size != totsize) {
4837 			if (!lecture_and_query(FDISK_LECTURE_NOT_FULL,
4838 			    devname)) {
4839 				(void) close(fd);
4840 				exit(1);
4841 			}
4842 		}
4843 	}
4844 }
4845 
4846 
4847 /*
4848  * get_node
4849  * Called from main to construct the name of the device node to open.
4850  * Initially tries to stat the node exactly as provided, if that fails
4851  * we prepend the default path (/dev/rdsk/).
4852  */
4853 static char *
4854 get_node(char *devname)
4855 {
4856 	char *node;
4857 	struct stat statbuf;
4858 	size_t space;
4859 
4860 	/* Don't do anything if we are skipping device checks */
4861 	if (io_image)
4862 		return (devname);
4863 
4864 	node = devname;
4865 
4866 	/* Try the node as provided first */
4867 	if (stat(node, (struct stat *)&statbuf) == -1) {
4868 		/*
4869 		 * Copy the passed in string to a new buffer, prepend the
4870 		 * default path and try again.
4871 		 */
4872 		space = strlen(DEFAULT_PATH) + strlen(devname) + 1;
4873 
4874 		if ((node = malloc(space)) == NULL) {
4875 			(void) fprintf(stderr, "fdisk: Unable to obtain memory "
4876 			    "for device node.\n");
4877 			exit(1);
4878 		}
4879 
4880 		/* Copy over the default path and the provided node */
4881 		(void) strncpy(node, DEFAULT_PATH, strlen(DEFAULT_PATH));
4882 		space -= strlen(DEFAULT_PATH);
4883 		(void) strlcpy(node + strlen(DEFAULT_PATH), devname, space);
4884 
4885 		/* Try to stat it again */
4886 		if (stat(node, (struct stat *)&statbuf) == -1) {
4887 			/* Failed all options, give up */
4888 			(void) fprintf(stderr,
4889 			    "fdisk: Cannot stat device %s.\n",
4890 			    devname);
4891 			exit(1);
4892 		}
4893 	}
4894 
4895 	/* Make sure the device specified is the raw device */
4896 	if ((statbuf.st_mode & S_IFMT) != S_IFCHR) {
4897 		(void) fprintf(stderr,
4898 		    "fdisk: %s must be a raw device.\n", node);
4899 		exit(1);
4900 	}
4901 
4902 	return (node);
4903 }
4904 
4905 #ifdef i386
4906 static void
4907 preach_and_continue()
4908 {
4909 	(void) fprintf(stderr, "There are mounted logical drives. Committing "
4910 	    "changes now can lead to inconsistancy in internal system state "
4911 	    "which can eventually cause data loss or corruption. Unmount all "
4912 	    "logical drives and try committing the changes again.\n");
4913 	ext_read_input(s);
4914 }
4915 
4916 /*
4917  * Convert a given partition ID to an descriptive string.
4918  * Just an index into the partition types table.
4919  */
4920 void
4921 id_to_name(uchar_t sysid, char *buffer)
4922 {
4923 	(void) strcpy(buffer, fdisk_part_types[sysid]);
4924 }
4925 
4926 /*
4927  * Procedure to check the validity of the extended partition menu option
4928  * entered by the user
4929  */
4930 static int
4931 ext_invalid_option(char ch)
4932 {
4933 	char *p;
4934 
4935 	p = strchr(ext_part_menu_opts, tolower(ch));
4936 
4937 	if (p == NULL) {
4938 		return (1);
4939 	}
4940 	return (0);
4941 }
4942 
4943 /*
4944  * Read 16 bytes of the input (assuming that no valid user input spans more
4945  * than that). Flush the input stream, so that the next read does not reap
4946  * stale data from the previous input that was not processed.
4947  * Note that fgets also reads the trailing '\n'
4948  */
4949 static void
4950 ext_read_input(char *buf)
4951 {
4952 	(void) fgets(buf, 16, stdin);
4953 	(void) fflush(stdin);
4954 }
4955 
4956 /*
4957  * Procedure to read and validate the user option at the extended partition menu
4958  */
4959 static int
4960 ext_read_options(char *buf)
4961 {
4962 	ext_read_input(buf);
4963 	if ((strlen(buf) != 2) || (ext_invalid_option(buf[0]))) {
4964 		(void) printf("\nUnknown Command\n");
4965 		return (-1);
4966 	}
4967 	return (0);
4968 }
4969 
4970 /*
4971  * Procedure to print the list of known partition types and their IDs
4972  */
4973 static void
4974 ext_print_part_types()
4975 {
4976 	int i, rowmax, rowcount = 1;
4977 	struct winsize ws;
4978 	char buf[80];
4979 
4980 	/* Get the current window dimensions */
4981 	if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) < 0) {
4982 		perror("ioctl");
4983 		rowmax = 20;
4984 	} else {
4985 		/*
4986 		 * Accommodate the initial headings by reducing the number of
4987 		 * partition IDs being printed.
4988 		 */
4989 		rowmax = ws.ws_row - 5;
4990 	}
4991 
4992 	if (rowmax < 3) {
4993 		(void) fprintf(stderr, "Window size too small."
4994 		    " Try resizing the window\n");
4995 		return;
4996 	}
4997 
4998 	(void) printf("List of known partition types : \n");
4999 	(void) printf("PartID          Partition Type\n");
5000 	(void) printf("======          ==============\n");
5001 	for (i = 0; i <= FDISK_MAX_VALID_PART_ID; i++) {
5002 		(void) printf("%-3d          %s\n", i, fdisk_part_types[i]);
5003 		rowcount++;
5004 		if (rowcount == rowmax) {
5005 			/*
5006 			 * After the initial screen, use all the rows for
5007 			 * printing the partition IDs, but one.
5008 			 */
5009 			rowmax = ws.ws_row - 1;
5010 			(void) fprintf(stderr, "\nPress enter to see next "
5011 			    "page or 'q' to quit : ");
5012 			ext_read_input(buf);
5013 			if ((strlen(buf) == 2) && (tolower(buf[0]) == 'q')) {
5014 				return;
5015 			}
5016 			rowcount = 1;
5017 		}
5018 	}
5019 }
5020 
5021 static void
5022 ext_read_valid_part_num(int *pno)
5023 {
5024 	char buf[80];
5025 	int len, i;
5026 
5027 	for (;;) {
5028 		(void) printf("Enter the partition number : ");
5029 		ext_read_input(buf);
5030 
5031 		len = strlen(buf);
5032 
5033 		/* Check length of the input */
5034 		if ((len < 2) || (len > (FDISK_MAX_VALID_PART_NUM_DIGITS+1))) {
5035 			goto print_error_and_continue;
5036 		}
5037 
5038 		/* Check if there is a non-digit in the input */
5039 		for (i = 0; i < len-1; i++) {
5040 			if (!isdigit(buf[i])) {
5041 				goto print_error_and_continue;
5042 			}
5043 		}
5044 
5045 		*pno = atoi(buf);
5046 
5047 		if ((*pno <= FD_NUMPART) ||
5048 		    *pno > (fdisk_get_logical_drive_count(epp) + FD_NUMPART)) {
5049 			goto print_error_and_continue;
5050 		}
5051 
5052 		break;
5053 print_error_and_continue:
5054 		(void) printf("Invalid partition number\n");
5055 		continue;
5056 	}
5057 }
5058 
5059 static void
5060 ext_read_valid_part_id(uchar_t *partid)
5061 {
5062 	char buf[80];
5063 	int len, i, id;
5064 
5065 	for (;;) {
5066 		(void) printf("Enter the ID ( Type I for list of "
5067 		    "partition IDs ) : ");
5068 		ext_read_input(buf);
5069 		len = strlen(buf);
5070 
5071 		if ((len < 2) || (len > (FDISK_MAX_VALID_PART_ID_DIGITS + 1))) {
5072 			(void) printf("Invalid partition ID\n");
5073 			continue;
5074 		}
5075 
5076 		if ((len == 2) && (toupper(buf[0]) == 'I')) {
5077 			ext_print_part_types();
5078 			continue;
5079 		}
5080 
5081 		/* Check if there is a non-digit in the input */
5082 		for (i = 0; i < len-1; i++) {
5083 			if (!isdigit(buf[i])) {
5084 				(void) printf("Invalid partition ID\n");
5085 				break;
5086 			}
5087 		}
5088 
5089 		if (i < len - 1) {
5090 			continue;
5091 		}
5092 
5093 		/* Check if the (now) valid number is greater than the limit */
5094 		if ((id = atoi(buf)) > FDISK_MAX_VALID_PART_ID) {
5095 			(void) printf("Invalid partition ID\n");
5096 			continue;
5097 		}
5098 
5099 		*partid = (uchar_t)id;
5100 
5101 		/* Disallow multiple extended partitions */
5102 		if (fdisk_is_dos_extended(*partid)) {
5103 			(void) printf("Multiple extended partitions not "
5104 			    "allowed\n");
5105 			continue;
5106 		}
5107 
5108 		/* Disallow EFI partitions within extended partition */
5109 		if (*partid == EFI_PMBR) {
5110 			(void) printf("EFI partitions within an extended "
5111 			    "partition is not allowed\n");
5112 			continue;
5113 		}
5114 
5115 		return; /* Valid partition ID is in partid */
5116 	}
5117 }
5118 
5119 static void
5120 delete_logical_drive()
5121 {
5122 	int pno;
5123 
5124 	if (!fdisk_get_logical_drive_count(epp)) {
5125 		(void) printf("\nNo logical drives defined.\n");
5126 		return;
5127 	}
5128 
5129 	(void) printf("\n");
5130 	ext_read_valid_part_num(&pno);
5131 	fdisk_delete_logical_drive(epp, pno);
5132 	(void) printf("Partition %d deleted\n", pno);
5133 }
5134 
5135 static int
5136 ext_read_valid_partition_start(uint32_t *begsec)
5137 {
5138 	char buf[80];
5139 	int ret, len, i;
5140 	uint32_t begcyl;
5141 	uint32_t first_free_cyl;
5142 	uint32_t first_free_sec;
5143 
5144 	ret = fdisk_ext_find_first_free_sec(epp, &first_free_sec);
5145 	if (ret != FDISK_SUCCESS) {
5146 		return (ret);
5147 	}
5148 
5149 	first_free_cyl = FDISK_SECT_TO_CYL(epp, first_free_sec);
5150 	for (;;) {
5151 		(void) printf("Enter the beginning cylinder (Default - %d) : ",
5152 		    first_free_cyl);
5153 		ext_read_input(buf);
5154 		len = strlen(buf);
5155 		if (len == 1) { /* User accepted the default value */
5156 			*begsec = first_free_sec;
5157 			return (FDISK_SUCCESS);
5158 		}
5159 
5160 		if (len > (FDISK_MAX_VALID_CYL_NUM_DIGITS + 1)) {
5161 			(void) printf("Input too long\n");
5162 			(void) printf("Invalid beginning cylinder number\n");
5163 			continue;
5164 		}
5165 		/* Check if there is a non-digit in the input */
5166 		for (i = 0; i < len - 1; i++) {
5167 			if (!isdigit(buf[i])) {
5168 				(void) printf("Invalid beginning cylinder "
5169 				    "number\n");
5170 				break;
5171 			}
5172 		}
5173 		if (i < len - 1) {
5174 			continue;
5175 		}
5176 
5177 		begcyl = atoi(buf);
5178 		ret = fdisk_ext_validate_part_start(epp, begcyl, begsec);
5179 		switch (ret) {
5180 			case FDISK_SUCCESS:
5181 				/*
5182 				 * Success.
5183 				 * Valid beginning sector is in begsec
5184 				 */
5185 				break;
5186 
5187 			case FDISK_EOVERLAP:
5188 				(void) printf("Partition boundary overlaps "
5189 				    "with ");
5190 				(void) printf("existing partitions\n");
5191 				(void) printf("Invalid beginning cylinder "
5192 				    "number\n");
5193 				continue;
5194 
5195 			case FDISK_EOOBOUND:
5196 				(void) printf("Cylinder boundary beyond the "
5197 				    "limits\n");
5198 				(void) printf("Invalid beginning cylinder "
5199 				    "number\n");
5200 				continue;
5201 		}
5202 		return (FDISK_SUCCESS);
5203 	}
5204 }
5205 
5206 /*
5207  * Algorithm :
5208  * 1. Check if the first character is a +
5209  *	a) If yes, check if the last character is 'k', 'm' or 'g'
5210  * 2. If not, check if there are any non-digits
5211  * 3. Check for the length of the numeral string
5212  * 4. atoi the numeral string
5213  * 5. In case of data entered in KB, MB or GB, convert it to number of cylinders
5214  *	a) Adjust size to be cylinder boundary aligned
5215  * 6. If size specifies is zero, flag error
5216  * 7. Check if the size is less than 1 cylinder
5217  *	a) If yes, default the size FDISK_MIN_PART_SIZE
5218  * 	b) If no, Check if the size is within endcyl - begcyl
5219  */
5220 static void
5221 ext_read_valid_partition_size(uint32_t begsec, uint32_t *endsec)
5222 {
5223 	char buf[80];
5224 	uint32_t last_free_sec;
5225 	uint32_t last_free_cyl;
5226 	int i, len, ch, mbgb = 0, scale = FDISK_SECTS_PER_CYL(epp);
5227 	uint64_t size = 0;
5228 	int copy_len;
5229 	char numbuf[FDISK_MAX_VALID_CYL_NUM_DIGITS + 1];
5230 	int sectsize = fdisk_get_disk_geom(epp, PHYSGEOM, SSIZE);
5231 	uint32_t remdr, spc, poss_end;
5232 
5233 	if (sectsize == EINVAL) {
5234 		(void) fprintf(stderr, "Unsupported geometry statistics.\n");
5235 		exit(1);
5236 	}
5237 
5238 	last_free_sec = fdisk_ext_find_last_free_sec(epp, begsec);
5239 	last_free_cyl = FDISK_SECT_TO_CYL(epp, last_free_sec);
5240 
5241 	for (;;) {
5242 		(void) printf("Enter the size in cylinders (Default End "
5243 		    "Cylinder -");
5244 		(void) printf(" %u)\n", last_free_cyl);
5245 		(void) printf("Type +<size>K, +<size>M or +<size>G to enter "
5246 		    "size in");
5247 		(void) printf("KB, MB or GB : ");
5248 		ext_read_input(buf);
5249 		len = strlen(buf);
5250 		mbgb = 0;
5251 		scale = FDISK_SECTS_PER_CYL(epp);
5252 
5253 		if (len == 1) { /* User accepted the default value */
5254 			*endsec = last_free_sec;
5255 			return;
5256 		}
5257 
5258 		copy_len = len - 1;
5259 
5260 		if ((buf[0] == '+') && (isdigit(buf[1]))) {
5261 			copy_len--;
5262 			if ((ch = toupper(buf[len - 2])) == 'B') {
5263 				ch = toupper(buf[len - 3]);
5264 				copy_len--;
5265 			}
5266 
5267 			if (!((ch == 'K') || (ch == 'M') || (ch == 'G'))) {
5268 				(void) printf("Invalid partition size\n");
5269 				continue;
5270 			}
5271 
5272 			copy_len--;
5273 			mbgb = 1;
5274 			scale = ((ch == 'K') ? FDISK_KB :
5275 			    ((ch == 'M') ? FDISK_MB : FDISK_GB));
5276 		}
5277 
5278 		if (copy_len > FDISK_MAX_VALID_CYL_NUM_DIGITS) {
5279 			(void) printf("Input too long\n");
5280 			(void) printf("Invalid partition size\n");
5281 			continue;
5282 		}
5283 
5284 		(void) strncpy(numbuf, &buf[mbgb], copy_len);
5285 		numbuf[copy_len] = '\0';
5286 
5287 		for (i = mbgb; i < copy_len + mbgb; i++) {
5288 			if (!isdigit(buf[i])) {
5289 				break;
5290 			}
5291 		}
5292 
5293 		if (i < copy_len + mbgb) {
5294 			(void) printf("Invalid partition size\n");
5295 			continue;
5296 		}
5297 
5298 		size = (atoll(numbuf) * (scale));
5299 
5300 		if (size == 0) {
5301 			(void) printf("Zero size is invalid\n");
5302 			(void) printf("Invalid partition size\n");
5303 			continue;
5304 		}
5305 
5306 		if (mbgb) {
5307 			size /= sectsize;
5308 		}
5309 
5310 		if (size > (last_free_sec - begsec + 1)) {
5311 			(void) printf("Cylinder boundary beyond the limits");
5312 			(void) printf(" or overlaps with existing");
5313 			(void) printf(" partitions\n");
5314 			(void) printf("Invalid partition size\n");
5315 			continue;
5316 		}
5317 
5318 		/*
5319 		 * Adjust the ending sector such that there are no partial
5320 		 * cylinders allocated. But at the same time, make sure it
5321 		 * doesn't over shoot boundaries.
5322 		 */
5323 		spc = FDISK_SECTS_PER_CYL(epp);
5324 		poss_end = begsec + size - 1;
5325 		if ((remdr = (poss_end % spc)) != 0) {
5326 			poss_end += spc - remdr - 1;
5327 		}
5328 		*endsec = (poss_end > last_free_sec) ? last_free_sec :
5329 		    poss_end;
5330 
5331 		return;
5332 	}
5333 }
5334 
5335 /*
5336  * ALGORITHM:
5337  * 1. Get the starting and ending sectors/cylinder of the extended partition.
5338  * 2. Keep track of the first free sector/cylinder
5339  * 3. Allow the user to specify the beginning cylinder of the new partition
5340  * 4. Check for the validity of the entered data
5341  *	a) If it is non-numeric
5342  *	b) If it is beyond the extended partition limits
5343  *	c) If it overlaps with the current logical drives
5344  * 5. Allow the user to specify the size in cylinders/ human readable form
5345  * 6. Check for the validity of the entered data
5346  *	a) If it is non-numeric
5347  *	b) If it is beyond the extended partition limits
5348  *	c) If it overlaps with the current logical drives
5349  *	d) If it is a number lesser than the starting cylinder
5350  * 7. Request partition ID for the new partition.
5351  * 8. Update the first free cylinder available
5352  * 9. Display Success message
5353  */
5354 
5355 static void
5356 add_logical_drive()
5357 {
5358 	uint32_t begsec, endsec;
5359 	uchar_t partid;
5360 	char buf[80];
5361 	int rval;
5362 
5363 	if (fdisk_get_logical_drive_count(epp) >= MAX_EXT_PARTS) {
5364 		(void) printf("\nNumber of logical drives exceeds limit of "
5365 		    "%d.\n", MAX_EXT_PARTS);
5366 		(void) printf("Command did not succeed. Press enter to "
5367 		    "continue\n");
5368 		ext_read_input(buf);
5369 		return;
5370 	}
5371 
5372 	(void) printf("\n");
5373 	rval = ext_read_valid_partition_start(&begsec);
5374 	switch (rval) {
5375 		case FDISK_SUCCESS:
5376 			break;
5377 
5378 		case FDISK_EOOBOUND:
5379 			(void) printf("\nNo space left in the extended "
5380 			    "partition\n");
5381 			(void) printf("Press enter to continue\n");
5382 			ext_read_input(buf);
5383 			return;
5384 	}
5385 
5386 	ext_read_valid_partition_size(begsec, &endsec);
5387 	ext_read_valid_part_id(&partid);
5388 	fdisk_add_logical_drive(epp, begsec, endsec, partid);
5389 
5390 	(void) printf("New partition with ID %d added\n", partid);
5391 }
5392 
5393 static void
5394 ext_change_logical_drive_id()
5395 {
5396 	int pno;
5397 	uchar_t partid;
5398 
5399 	if (!fdisk_get_logical_drive_count(epp)) {
5400 		(void) printf("\nNo logical drives defined.\n");
5401 		return;
5402 	}
5403 
5404 	(void) printf("\n");
5405 	ext_read_valid_part_num(&pno);
5406 	ext_read_valid_part_id(&partid);
5407 	fdisk_change_logical_drive_id(epp, pno, partid);
5408 
5409 	(void) printf("Partition ID of partition %d changed to %d\n", pno,
5410 	    partid);
5411 }
5412 
5413 #ifdef DEBUG
5414 static void
5415 ext_print_logdrive_layout_debug()
5416 {
5417 	int pno;
5418 	char namebuff[255];
5419 	logical_drive_t *head = fdisk_get_ld_head(epp);
5420 	logical_drive_t *temp;
5421 
5422 	if (!fdisk_get_logical_drive_count(epp)) {
5423 		(void) printf("\nNo logical drives defined.\n");
5424 		return;
5425 	}
5426 
5427 	(void) printf("\n\n");
5428 	puts("#  start block  end block    abs start    abs end      OSType");
5429 	for (temp = head, pno = 5; temp != NULL; temp = temp->next, pno++) {
5430 		/* Print the logical drive details */
5431 		id_to_name(temp->parts[0].systid, namebuff);
5432 		(void) printf("%d: %.10u   %.10u   %.10u   %.10u",
5433 		    pno,
5434 		    LE_32(temp->parts[0].relsect),
5435 		    LE_32(temp->parts[0].numsect),
5436 		    temp->abs_secnum,
5437 		    temp->abs_secnum + temp->numsect - 1 +
5438 		    MAX_LOGDRIVE_OFFSET);
5439 		(void) printf("   %s\n", namebuff);
5440 		/*
5441 		 * Print the second entry in the EBR which is information
5442 		 * about the location and the size of the next extended
5443 		 * partition.
5444 		 */
5445 		id_to_name(temp->parts[1].systid, namebuff);
5446 		(void) printf("%d: %.10u   %.10u   %.10s   %.10s",
5447 		    pno,
5448 		    LE_32(temp->parts[1].relsect),
5449 		    LE_32(temp->parts[1].numsect),
5450 		    "          ", "          ");
5451 		(void) printf("   %s\n", namebuff);
5452 	}
5453 }
5454 #endif
5455 
5456 static void
5457 ext_print_logical_drive_layout()
5458 {
5459 	int sysid;
5460 	unsigned int startcyl, endcyl, length, percent, remainder;
5461 	logical_drive_t *temp;
5462 	uint32_t part_start;
5463 	struct ipart *fpart;
5464 	char namebuff[255];
5465 	int numcyl = fdisk_get_disk_geom(epp, PHYSGEOM, NCYL);
5466 	int pno;
5467 
5468 	if (numcyl == EINVAL) {
5469 		(void) fprintf(stderr, "Unsupported geometry statistics.\n");
5470 		exit(1);
5471 	}
5472 
5473 	if (!fdisk_get_logical_drive_count(epp)) {
5474 		(void) printf("\nNo logical drives defined.\n");
5475 		return;
5476 	}
5477 
5478 	(void) printf("\n");
5479 	(void) printf("Number of cylinders in disk              : %u\n",
5480 	    numcyl);
5481 	(void) printf("Beginning cylinder of extended partition : %u\n",
5482 	    fdisk_get_ext_beg_cyl(epp));
5483 	(void) printf("Ending cylinder of extended partition    : %u\n",
5484 	    fdisk_get_ext_end_cyl(epp));
5485 	(void) printf("\n");
5486 	(void) printf("Part#   StartCyl   EndCyl     Length    %%     "
5487 	"Part ID (Type)\n");
5488 	(void) printf("=====   ========   ========   =======   ==="
5489 	"   ==============\n");
5490 	for (temp = fdisk_get_ld_head(epp), pno = 5; temp != NULL;
5491 	    temp = temp->next, pno++) {
5492 		/* Print the logical drive details */
5493 		fpart = &temp->parts[0];
5494 		sysid = fpart->systid;
5495 		/*
5496 		 * Check if partition id 0x82 is Solaris
5497 		 * or a Linux swap. Print the string
5498 		 * accordingly.
5499 		 */
5500 		if (sysid == SUNIXOS) {
5501 			part_start = temp->abs_secnum +
5502 			    temp->logdrive_offset;
5503 			if (fdisk_is_linux_swap(epp, part_start,
5504 			    NULL) == 0)
5505 				(void) strcpy(namebuff, LINSWAPstr);
5506 			else
5507 				(void) strcpy(namebuff, SUstr);
5508 		} else {
5509 			id_to_name(sysid, namebuff);
5510 		}
5511 		startcyl = temp->begcyl;
5512 		endcyl = temp->endcyl;
5513 		if (startcyl == endcyl) {
5514 			length = 1;
5515 		} else {
5516 			length = endcyl - startcyl + 1;
5517 		}
5518 		percent = length * 100 / numcyl;
5519 		if ((remainder = (length * 100 % numcyl)) != 0) {
5520 			if ((remainder * 100 / numcyl) > 50) {
5521 				/* round up */
5522 				percent++;
5523 			}
5524 			/* Else leave the percent as is since it's already */
5525 			/* rounded down */
5526 		}
5527 		if (percent > 100) {
5528 			percent = 100;
5529 		}
5530 		(void) printf("%-5d   %-8u   %-8u   %-7u   %-3d   "
5531 		    "%-3d (%-.28s)\n",
5532 		    pno, startcyl, endcyl, length, percent, sysid, namebuff);
5533 	}
5534 #ifdef DEBUG
5535 	ext_print_logdrive_layout_debug();
5536 #endif
5537 	(void) printf("\n");
5538 }
5539 
5540 static void
5541 ext_print_help_menu()
5542 {
5543 	(void) printf("\n");
5544 	(void) printf("a	Add a logical drive\n");
5545 	(void) printf("d	Delete a logical drive\n");
5546 	(void) printf("h	Print this help menu\n");
5547 	(void) printf("i	Change the id of the logical drive\n");
5548 	(void) printf("p	Print the logical drive layout\n");
5549 	(void) printf("r	Return to the main fdisk menu\n");
5550 	(void) printf("        (To commit or cancel the changes)\n");
5551 	(void) printf("\n");
5552 }
5553 
5554 static void
5555 ext_part_menu()
5556 {
5557 	char buf[80];
5558 	uchar_t *bbsigp;
5559 	static int bbsig_disp_flag = 1;
5560 
5561 	int i;
5562 
5563 	(void) printf(CLR_SCR);
5564 
5565 	if (fdisk_corrupt_logical_drives(epp)) {
5566 		(void) printf("One or more logical drives seem to be "
5567 		    "corrupt.\n");
5568 		(void) printf("Displaying only sane logical drives.\n");
5569 	}
5570 
5571 	if (bbsig_disp_flag && fdisk_invalid_bb_sig(epp, &bbsigp)) {
5572 		(void) printf("The following logical drives have a wrong "
5573 		    "boot block signature :\n\n");
5574 		for (i = 0; bbsigp[i]; i++) {
5575 			(void) printf("%d ", bbsigp[i]);
5576 		}
5577 		(void) printf("\n\n");
5578 		(void) printf("They will be corrected when you choose to "
5579 		    "commit\n");
5580 		bbsig_disp_flag = 0;
5581 	}
5582 
5583 	(void) printf("Extended partition menu\n");
5584 
5585 	for (;;) {
5586 		(void) printf("\nEnter Command (Type h for help) : ");
5587 		if ((ext_read_options(buf)) < 0) {
5588 			(void) printf("\nCommand Options : \n");
5589 			ext_print_help_menu();
5590 			continue;
5591 		}
5592 		switch (buf[0]) {
5593 			case 'a':
5594 				add_logical_drive();
5595 				break;
5596 			case 'd':
5597 				delete_logical_drive();
5598 				break;
5599 			case 'h':
5600 				ext_print_help_menu();
5601 				break;
5602 			case 'i':
5603 				ext_change_logical_drive_id();
5604 				break;
5605 			case 'p':
5606 				ext_print_logical_drive_layout();
5607 				break;
5608 			case 'r':
5609 				(void) printf(CLR_SCR);
5610 				return;
5611 			default : /* NOTREACHED */
5612 				break;
5613 		}
5614 	}
5615 }
5616 #endif /* i386 */
5617 
5618 static int
5619 nopartdefined()
5620 {
5621 	int i;
5622 
5623 	for (i = 0; i < FD_NUMPART; i++)
5624 		if (Table[i].systid != UNUSED)
5625 			return (0);
5626 	return (1);
5627 }
5628