xref: /titanic_51/usr/src/cmd/cmd-inet/usr.sbin/Makefile (revision e37d48e735b8e55f327dfa35a2d0006049ea5e58)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License, Version 1.0 only
6# (the "License").  You may not use this file except in compliance
7# with the License.
8#
9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10# or http://www.opensolaris.org/os/licensing.
11# See the License for the specific language governing permissions
12# and limitations under the License.
13#
14# When distributing Covered Code, include this CDDL HEADER in each
15# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16# If applicable, add the following below this CDDL HEADER, with the
17# fields enclosed by brackets "[]" replaced with your own identifying
18# information: Portions Copyright [yyyy] [name of copyright owner]
19#
20# CDDL HEADER END
21#
22#
23# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# ident	"%Z%%M%	%I%	%E% SMI"
27#
28
29SYNCPROG=	syncinit syncloop syncstat
30DHCPPROG=	dhcpconfig dhtadm pntadm
31
32# EXPORT DELETE START
33XMODPROG=	wanbootutil
34# EXPORT DELETE END
35
36PROG=		6to4relay arp gettable if_mpadm ikeadm ikecert \
37		in.comsat in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind \
38		in.rshd in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \
39		ipsecalgs ipsecconf ipseckey ndd $(SYNCPROG) $(DHCPPROG) \
40		$(XMODPROG)
41
42MANIFEST=	rarp.xml telnet.xml comsat.xml finger.xml \
43		login.xml shell.xml rexec.xml tname.xml
44
45ROOTFS_PROG=	hostconfig route routeadm soconfig
46SBINLINKS=	hostconfig route routeadm
47
48RPCSVCPROG=	hostconfig
49AUDITPROG=	in.rexecd in.rlogind in.rshd in.telnetd
50PAMPROG=	in.rexecd in.rlogind in.rshd in.telnetd
51SOCKETPROG=	6to4relay arp gettable hostconfig if_mpadm in.comsat \
52		in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind in.rshd \
53		in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \
54		ipsecalgs ipsecconf ipseckey route routeadm
55NSLPROG=	6to4relay arp gettable hostconfig ikeadm in.comsat in.rarpd \
56		in.rdisc in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \
57		in.tftpd in.tnamed ipaddrsel ipsecalgs ipsecconf ipseckey route
58CMDPROG=	in.telnetd
59IPSECUTILPROG=	ikeadm ipsecalgs ipsecconf ipseckey
60K5PROGS=	in.telnetd in.rlogind in.rshd
61DEFAULTFILES=	telnetd.dfl
62
63PROGSRCS=	$(PROG:%=%.c)
64TFTPDOBJS=	in.tftpd.o tftpsubs.o
65OTHERSRC=	../usr.bin/tftp/tftpsubs.c
66K5RLOGINOBJS=	in.rlogind.o
67K5RSHDOBJS=	in.rshd.o
68SRCS=		$(PROGSRCS) $(OTHERSRC)
69
70SUBDIRS=	bootconfchk htable ifconfig in.ftpd in.routed \
71		in.talkd inetadm inetconv ipqosconf mipagentconfig \
72		mipagentstat ping snoop sppptun traceroute
73
74MSGSUBDIRS=	bootconfchk htable ifconfig in.ftpd in.routed in.talkd \
75		inetadm inetconv ipqosconf mipagentconfig mipagentstat \
76		sppptun snoop
77
78# As programs get lint-clean, add them here and to the 'lint' target.
79# Eventually this hack should go away, and all in PROG should be
80# lint-clean.
81LINTCLEAN=	6to4relay arp ikeadm in.rlogind in.rshd in.telnetd in.tftpd \
82		ipaddrsel ipsecalgs ipseckey ipsecconf route routeadm \
83		in.rarpd  $(SYNCPROG)
84# Likewise, as subdirs get lint-clean, add them here.  Once
85# they're all clean, replace the dependency of the lint target
86# with SUBDIRS.  Also (sigh) deal with the commented-out build lines
87# for the lint rule.
88LINTSUBDIRS=	bootconfchk in.routed in.talkd inetadm inetconv ipqosconf \
89		mipagentstat ping sppptun traceroute
90# And as programs are verified not to attempt to write into constants,
91# -xstrconst should be used to ensure they stay that way.
92CONSTCLEAN=	ikeadm
93
94include ../../Makefile.cmd
95ROOTMANIFESTDIR=	$(ROOTSVCNETWORK)
96$(ROOTMANIFEST)		:= FILEMODE= 444
97include ../Makefile.cmd-inet
98
99ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%)
100ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%)
101
102COMMONOBJS=	kcmd.o
103COMMONSRCS=	$(CMDINETCOMMONDIR)/$(COMMONOBJS:.o=.c)
104SRCS+=		$(COMMONSRCS)
105
106#
107# Message catalog
108#
109POFILES=	6to4relay.po if_mpadm.po ikeadm.po in.comsat.po ipaddrsel.po \
110		ipsecalgs.po ipsecconf.po ipseckey.po route.po routeadm.po
111POFILE=		usr.sbin.po
112
113all:=		TARGET= all
114install:=	TARGET= install
115clean:=		TARGET= clean
116clobber:=	TARGET= clobber
117lint:=		TARGET= lint
118_msg:=		TARGET= _msg
119
120CLOBBERFILES +=	$(ROOTFS_PROG) $(PROG)
121CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS)
122
123CPPFLAGS +=	-DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I.
124
125include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
126K5LIBS=
127
128# Eventually just plain CFLAGS should be += -v, but not until all in
129# PROGS are lint clean.
130$(LINTCLEAN)		:=	CFLAGS += $(CCVERBOSE)
131$(CONSTCLEAN)		:=	CFLAGS += $(XSTRCONST)
132
133$(SYNCPROG)		:=	LDLIBS += -ldlpi
134$(SOCKETPROG)		:=	LDLIBS += -lsocket
135$(NSLPROG)		:=	LDLIBS += -lnsl
136$(AUDITPROG)		:=	LDLIBS += -lbsm
137$(PAMPROG)		:=	LDLIBS += -lpam
138$(RPCSVCPROG)		:=	LDLIBS += -lrpcsvc
139$(CMDPROG)		:=	LDLIBS += -lcmd
140$(K5PROGS)		:=	LDFLAGS += $(ZLAZYLOAD) $(KRUNPATH) \
141				-L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL)
142$(K5PROGS)		:=	K5LIBS=  -lmech_krb5
143$(K5PROGS)		:=	CPPFLAGS += -I$(SRC)/head \
144				-I$(SRC)/uts/common/ \
145				-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
146				-I$(SRC)/lib/gss_mechs/mech_krb5/include \
147				-I$(SRC)/lib/pam_modules/krb5
148LDLIBS +=	$(K5LIBS)
149$(IPSECUTILPROG)	:=	LDLIBS += -lipsecutil
150
151in.rarpd		:=	LDLIBS += -linetutil
152route			:=	CPPFLAGS += -DNDEBUG
153
154.KEEP_STATE:
155
156.PARALLEL:
157
158all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS)
159
160#
161# message catalog
162#
163_msg: $(MSGSUBDIRS) $(POFILE)
164
165syncutil: $(SYNCPROG)
166
167$(POFILE): $(POFILES)
168	$(RM) $@
169	cat $(POFILES) > $@
170
171$(COMMONOBJS): $(COMMONSRCS)
172	$(COMPILE.c) $(COMMONSRCS)
173
174in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS)
175	$(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
176	$(POST_PROCESS)
177
178in.rshd: $(K5RSHDOBJS) $(COMMONOBJS)
179	$(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
180	$(POST_PROCESS)
181
182in.tftpd: $(TFTPDOBJS)
183	$(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS)
184	$(POST_PROCESS)
185
186tftpsubs.o: $(OTHERSRC)
187	$(COMPILE.c) $(OTHERSRC) -o $@
188	$(POST_PROCESS_O)
189
190$(ROOTUSRSBINLINKS):
191	-$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@
192
193install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \
194	$(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \
195	$(ROOTMANIFEST)
196
197#
198# The reason this rule checks for the existence of the
199# Makefile is that some of the directories do not exist
200# in our exportable source builds.
201#
202$(SUBDIRS): FRC
203	@if [ -f $@/Makefile  ]; then \
204		cd $@; pwd; $(MAKE) $(TARGET); \
205	else \
206		true; \
207	fi
208
209FRC:
210
211check:	$(CHKMANIFEST)
212
213clean:	$(SUBDIRS)
214	-$(RM) $(CLEANFILES)
215
216clobber: $(SUBDIRS)
217	-$(RM) $(CLEANFILES) $(CLOBBERFILES)
218
219lint: $(LINTSUBDIRS)
220	$(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl
221	$(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl
222	@# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam
223	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
224		-I$(SRC)/head -I$(SRC)/uts/common/ \
225		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
226		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
227		-I$(SRC)/lib/pam_modules/krb5 \
228		in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
229	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
230		-I$(SRC)/head -I$(SRC)/uts/common/ \
231		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
232		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
233		-I$(SRC)/lib/pam_modules/krb5 \
234		in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
235	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \
236		-erroff=E_GLOBAL_COULD_BE_STATIC2 \
237		-I$(SRC)/head -I$(SRC)/uts/common/ \
238		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
239		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
240		-I$(SRC)/lib/pam_modules/krb5 \
241		in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl
242	$(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl
243	$(LINT.c) ipsecalgs.c $(LDLIBS) -lsocket -lnsl -lipsecutil
244	$(LINT.c) ipsecconf.c $(LDLIBS) -lsocket -lnsl -lipsecutil
245	$(LINT.c) ipseckey.c $(LDLIBS) -lsocket -lnsl -lipsecutil
246	$(LINT.c) ikeadm.c $(LDLIBS) -lnsl -lipsecutil
247	$(LINT.c) route.c $(LDLIBS) -lsocket -lnsl
248	$(LINT.c) routeadm.c $(LDLIBS) -lsocket
249	$(LINT.c) syncinit.c $(LDLIBS) -ldlpi
250	$(LINT.c) syncloop.c $(LDLIBS) -ldlpi
251	$(LINT.c) syncstat.c $(LDLIBS) -ldlpi
252	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \
253	    -lsocket -lnsl
254	$(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \
255	    -lsocket -lnsl
256
257# EXPORT DELETE START
258EXPORT_SRC:
259	$(RM) Makefile+
260	sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
261		< Makefile > Makefile+
262	$(RM) Makefile
263	$(MV) Makefile+ Makefile
264	$(CHMOD) 444 Makefile
265# EXPORT DELETE END
266