1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 #include <sys/machsystm.h> 30 #include <sys/archsystm.h> 31 #include <sys/prom_plat.h> 32 #include <sys/promif.h> 33 #include <sys/vm.h> 34 #include <sys/cpu.h> 35 #include <sys/atomic.h> 36 #include <sys/cpupart.h> 37 #include <sys/disp.h> 38 #include <sys/hypervisor_api.h> 39 #ifdef TRAPTRACE 40 #include <sys/traptrace.h> 41 #include <sys/hypervisor_api.h> 42 #endif /* TRAPTRACE */ 43 44 caddr_t mmu_fault_status_area; 45 46 extern void sfmmu_set_tsbs(void); 47 /* 48 * CPU IDLE optimization variables/routines 49 */ 50 static int enable_halt_idle_cpus = 1; 51 52 void 53 setup_trap_table(void) 54 { 55 caddr_t mmfsa_va; 56 extern caddr_t mmu_fault_status_area; 57 mmfsa_va = 58 mmu_fault_status_area + (MMFSA_SIZE * CPU->cpu_id); 59 60 intr_init(CPU); /* init interrupt request free list */ 61 setwstate(WSTATE_KERN); 62 set_mmfsa_scratchpad(mmfsa_va); 63 prom_set_mmfsa_traptable(&trap_table, va_to_pa(mmfsa_va)); 64 sfmmu_set_tsbs(); 65 } 66 67 void 68 phys_install_has_changed(void) 69 { 70 71 } 72 73 /* 74 * Halt the present CPU until awoken via an interrupt 75 */ 76 static void 77 cpu_halt(void) 78 { 79 cpu_t *cpup = CPU; 80 processorid_t cpun = cpup->cpu_id; 81 cpupart_t *cp = cpup->cpu_part; 82 int hset_update = 1; 83 uint_t s; 84 85 /* 86 * If this CPU is online, and there's multiple CPUs 87 * in the system, then we should notate our halting 88 * by adding ourselves to the partition's halted CPU 89 * bitmap. This allows other CPUs to find/awaken us when 90 * work becomes available. 91 */ 92 if (CPU->cpu_flags & CPU_OFFLINE || ncpus == 1) 93 hset_update = 0; 94 95 /* 96 * Add ourselves to the partition's halted CPUs bitmask 97 * and set our HALTED flag, if necessary. 98 * 99 * When a thread becomes runnable, it is placed on the queue 100 * and then the halted cpuset is checked to determine who 101 * (if anyone) should be awoken. We therefore need to first 102 * add ourselves to the halted cpuset, and then check if there 103 * is any work available. 104 */ 105 if (hset_update) { 106 cpup->cpu_disp_flags |= CPU_DISP_HALTED; 107 membar_producer(); 108 CPUSET_ATOMIC_ADD(cp->cp_haltset, cpun); 109 } 110 111 /* 112 * Check to make sure there's really nothing to do. 113 * Work destined for this CPU may become available after 114 * this check. We'll be notified through the clearing of our 115 * bit in the halted CPU bitmask, and a poke. 116 */ 117 if (disp_anywork()) { 118 if (hset_update) { 119 cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; 120 CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); 121 } 122 return; 123 } 124 125 /* 126 * We're on our way to being halted. 127 * 128 * Disable interrupts now, so that we'll awaken immediately 129 * after halting if someone tries to poke us between now and 130 * the time we actually halt. 131 * 132 * We check for the presence of our bit after disabling interrupts. 133 * If it's cleared, we'll return. If the bit is cleared after 134 * we check then the poke will pop us out of the halted state. 135 * 136 * The ordering of the poke and the clearing of the bit by cpu_wakeup 137 * is important. 138 * cpu_wakeup() must clear, then poke. 139 * cpu_halt() must disable interrupts, then check for the bit. 140 */ 141 s = disable_vec_intr(); 142 143 if (hset_update && !CPU_IN_SET(cp->cp_haltset, cpun)) { 144 cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; 145 enable_vec_intr(s); 146 return; 147 } 148 149 /* 150 * The check for anything locally runnable is here for performance 151 * and isn't needed for correctness. disp_nrunnable ought to be 152 * in our cache still, so it's inexpensive to check, and if there 153 * is anything runnable we won't have to wait for the poke. 154 */ 155 if (cpup->cpu_disp->disp_nrunnable != 0) { 156 if (hset_update) { 157 cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; 158 CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); 159 } 160 enable_vec_intr(s); 161 return; 162 } 163 164 /* 165 * Halt the strand 166 */ 167 (void) hv_cpu_yield(); 168 169 /* 170 * We're no longer halted 171 */ 172 enable_vec_intr(s); 173 if (hset_update) { 174 cpup->cpu_disp_flags &= ~CPU_DISP_HALTED; 175 CPUSET_ATOMIC_DEL(cp->cp_haltset, cpun); 176 } 177 } 178 179 /* 180 * If "cpu" is halted, then wake it up clearing its halted bit in advance. 181 * Otherwise, see if other CPUs in the cpu partition are halted and need to 182 * be woken up so that they can steal the thread we placed on this CPU. 183 * This function is only used on MP systems. 184 */ 185 static void 186 cpu_wakeup(cpu_t *cpu, int bound) 187 { 188 uint_t cpu_found; 189 int result; 190 cpupart_t *cp; 191 192 cp = cpu->cpu_part; 193 if (CPU_IN_SET(cp->cp_haltset, cpu->cpu_id)) { 194 /* 195 * Clear the halted bit for that CPU since it will be 196 * poked in a moment. 197 */ 198 CPUSET_ATOMIC_DEL(cp->cp_haltset, cpu->cpu_id); 199 /* 200 * We may find the current CPU present in the halted cpuset 201 * if we're in the context of an interrupt that occurred 202 * before we had a chance to clear our bit in cpu_halt(). 203 * Poking ourself is obviously unnecessary, since if 204 * we're here, we're not halted. 205 */ 206 if (cpu != CPU) 207 poke_cpu(cpu->cpu_id); 208 return; 209 } else { 210 /* 211 * This cpu isn't halted, but it's idle or undergoing a 212 * context switch. No need to awaken anyone else. 213 */ 214 if (cpu->cpu_thread == cpu->cpu_idle_thread || 215 cpu->cpu_disp_flags & CPU_DISP_DONTSTEAL) 216 return; 217 } 218 219 /* 220 * No need to wake up other CPUs if the thread we just enqueued 221 * is bound. 222 */ 223 if (bound) 224 return; 225 226 /* 227 * See if there's any other halted CPUs. If there are, then 228 * select one, and awaken it. 229 * It's possible that after we find a CPU, somebody else 230 * will awaken it before we get the chance. 231 * In that case, look again. 232 */ 233 do { 234 CPUSET_FIND(cp->cp_haltset, cpu_found); 235 if (cpu_found == CPUSET_NOTINSET) 236 return; 237 238 ASSERT(cpu_found >= 0 && cpu_found < NCPU); 239 CPUSET_ATOMIC_XDEL(cp->cp_haltset, cpu_found, result); 240 } while (result < 0); 241 242 if (cpu_found != CPU->cpu_id) 243 poke_cpu(cpu_found); 244 } 245 246 void 247 mach_cpu_halt_idle() 248 { 249 if (enable_halt_idle_cpus) { 250 idle_cpu = cpu_halt; 251 disp_enq_thread = cpu_wakeup; 252 } 253 } 254 255 int 256 ndata_alloc_mmfsa(struct memlist *ndata) 257 { 258 size_t size; 259 260 size = MMFSA_SIZE * max_ncpus; 261 mmu_fault_status_area = ndata_alloc(ndata, size, ecache_alignsize); 262 if (mmu_fault_status_area == NULL) 263 return (-1); 264 return (0); 265 } 266 267 void 268 mach_memscrub(void) 269 { 270 /* no memscrub support for sun4v for now */ 271 } 272 273 void 274 mach_fpras() 275 { 276 /* no fpras support for sun4v for now */ 277 } 278 279 void 280 mach_hw_copy_limit(void) 281 { 282 /* HW copy limits set by individual CPU module */ 283 } 284 285 #ifdef TRAPTRACE 286 /* 287 * This function sets up hypervisor traptrace buffer 288 */ 289 void 290 htrap_trace_setup(caddr_t buf, int cpuid) 291 { 292 TRAP_TRACE_CTL *ctlp; 293 294 ctlp = &trap_trace_ctl[cpuid]; 295 ctlp->d.hvaddr_base = buf; 296 ctlp->d.hlimit = HTRAP_TSIZE; 297 ctlp->d.hpaddr_base = va_to_pa(buf); 298 } 299 300 /* 301 * This function configures and enables the hypervisor traptrace buffer 302 */ 303 void 304 htrap_trace_register(int cpuid) 305 { 306 uint64_t ret; 307 uint64_t prev_buf, prev_bufsize; 308 uint64_t prev_enable; 309 uint64_t size; 310 TRAP_TRACE_CTL *ctlp; 311 312 ret = hv_ttrace_buf_info(&prev_buf, &prev_bufsize); 313 if ((ret == H_EOK) && (prev_bufsize != 0)) { 314 cmn_err(CE_CONT, 315 "!cpu%d: previous HV traptrace buffer of size 0x%lx " 316 "at address 0x%lx", cpuid, prev_bufsize, prev_buf); 317 } 318 319 ctlp = &trap_trace_ctl[cpuid]; 320 ret = hv_ttrace_buf_conf(ctlp->d.hpaddr_base, HTRAP_TSIZE / 321 (sizeof (struct htrap_trace_record)), &size); 322 if (ret == H_EOK) { 323 ret = hv_ttrace_enable((uint64_t)TRAP_TENABLE_ALL, 324 &prev_enable); 325 if (ret != H_EOK) { 326 cmn_err(CE_WARN, 327 "!cpu%d: HV traptracing not enabled, " 328 "ta: 0x%x returned error: %ld", 329 cpuid, TTRACE_ENABLE, ret); 330 } 331 } else { 332 cmn_err(CE_WARN, 333 "!cpu%d: HV traptrace buffer not configured, " 334 "ta: 0x%x returned error: %ld", 335 cpuid, TTRACE_BUF_CONF, ret); 336 } 337 /* set hvaddr_base to NULL when traptrace buffer registration fails */ 338 if (ret != H_EOK) { 339 ctlp->d.hvaddr_base = NULL; 340 ctlp->d.hlimit = 0; 341 ctlp->d.hpaddr_base = NULL; 342 } 343 } 344 #endif /* TRAPTRACE */ 345