xref: /titanic_50/usr/src/uts/sun4u/sys/i2c/nexus/pcf8584.h (revision d2d5cf7c5d909b74a88d499283e24750a9a52c5d)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #ifndef _PCF8584_H
28 #define	_PCF8584_H
29 
30 #pragma ident	"%Z%%M%	%I%	%E% SMI"
31 
32 #ifdef	__cplusplus
33 extern "C" {
34 #endif
35 
36 #include <sys/promif.h>
37 
38 /*
39  * S1 control
40  */
41 #define	S1_ACK	0x01
42 #define	S1_STO	0x02
43 #define	S1_STA	0x04
44 #define	S1_ENI	0x08
45 #define	S1_ES2	0x10
46 #define	S1_ES1	0x20
47 #define	S1_ESO	0x40
48 
49 /*
50  * S1 status
51  */
52 #define	S1_BBN	0x01
53 #define	S1_LAB	0x02
54 #define	S1_AAS	0x04
55 #define	S1_AD0	0x08
56 #define	S1_LRB	0x08
57 #define	S1_BER	0x10
58 #define	S1_STS	0x20
59 
60 /*
61  * S1 control/status
62  */
63 
64 #define	S1_PIN	0x80
65 
66 /*
67  * This has to be OR'ed in with the address for
68  * I2C read transactions.
69  */
70 #define	I2C_READ	0x01
71 
72 /*
73  * S0 initialization bytes
74  */
75 
76 #define	S0_OWN 0x55
77 #define	S0_CLK 0x1C		/* System clock = 12 MHz, SCL = 90 KHz) */
78 
79 #define	PCF8584_INIT_WAIT 200000	/* 200 ms */
80 #define	DUMMY_ADDR 0x20
81 #define	DUMMY_DATA 0x00
82 
83 #define	MONITOR_ADDRESS	0x0
84 
85 #define	S1_START	(S1_PIN | S1_ESO | S1_STA | S1_ACK)
86 #define	S1_STOP		(S1_PIN | S1_ESO | S1_STO | S1_ACK)
87 #define	S1_START2	(S1_ESO | S1_STA | S1_ACK)
88 
89 /*
90  * printing levels
91  */
92 #define	PRT_SELECT	0x01
93 #define	PRT_INTR	0x02
94 #define	PRT_INIT	0x04
95 #define	PRT_TRAN	0x08
96 #define	PRT_POLL	0x10
97 #define	PRT_BUFFONLY	0x100
98 #define	PRT_PROM	0x200
99 
100 /*
101  * states for the I2C state machine.
102  */
103 enum tran_state {
104 	TRAN_STATE_NULL,
105 	TRAN_STATE_WR,
106 	TRAN_STATE_RD,
107 	TRAN_STATE_WR_RD,
108 	TRAN_STATE_START,
109 	TRAN_STATE_DUMMY_DATA,
110 	TRAN_STATE_DUMMY_RD
111 };
112 
113 /*
114  * different implementations of pcf8584
115  */
116 enum impl_type {
117 	GENERIC,
118 	BBC,
119 	PIC16F747
120 };
121 
122 typedef struct pcf8584_regs {
123 	uint8_t *pcf8584_regs_s0;
124 	uint8_t *pcf8584_regs_s1;
125 } pcf8584_regs_t;
126 
127 typedef struct pcf8584 {
128 	dev_info_t		*pcf8584_dip;
129 	int			pcf8584_attachflags;
130 	kcondvar_t		pcf8584_cv;
131 	kmutex_t		pcf8584_imutex;
132 	kcondvar_t		pcf8584_icv;
133 	ddi_iblock_cookie_t	pcf8584_icookie;
134 	int			pcf8584_mode;
135 	int			pcf8584_open;
136 	int			pcf8584_busy;
137 	int			pcf8584_bus;
138 	int			pcf8584_cur_status;
139 	dev_info_t		*pcf8584_nexus_dip;
140 	i2c_transfer_t		*pcf8584_cur_tran;
141 	dev_info_t		*pcf8584_cur_dip;
142 	pcf8584_regs_t		pcf8584_regs;
143 	ddi_acc_handle_t	pcf8584_rhandle;
144 	uint8_t			*pcf8584_b_reg;
145 	ddi_acc_handle_t	pcf8584_b_rhandle;
146 	enum tran_state		pcf8584_tran_state;
147 	char			pcf8584_name[12];
148 	enum impl_type		pcf8584_impl_type;
149 	uint32_t		pcf8584_impl_delay;
150 } pcf8584_t;
151 
152 /*
153  * i2c_parent_pvt contains info that is chip specific
154  * and is stored on the child's devinfo parent private data.
155  */
156 typedef struct pcf8584_ppvt {
157 	int pcf8584_ppvt_bus; /* xcal's bbc implmentation multiplexes */
158 			    /* multiple I2C busses on a single set of */
159 			    /* registers.  this tells it what bus to */
160 			    /* use  */
161 	int pcf8584_ppvt_addr; /* address of I2C device */
162 } pcf8584_ppvt_t;
163 
164 #define	PCF8584_PIL			4
165 #define	PCF8584_POLL_MODE		1
166 #define	PCF8584_INTR_MODE		2
167 #define	PCF8584_INITIAL_SOFT_SPACE	4
168 #define	PCF8584_GENERIC_DELAY		0
169 #define	PCF8584_PIC16F747_DELAY		10
170 
171 /*
172  * generic interrupt return values
173  */
174 #define	I2C_COMPLETE	2
175 #define	I2C_PENDING	3
176 
177 /*
178  * Transfer status values
179  */
180 #define	PCF8584_TRANSFER_NEW	1
181 #define	PCF8584_TRANSFER_ON	2
182 #define	PCF8584_TRANSFER_OVER	3
183 
184 /*
185  * Attach flags
186  */
187 #define	ADD_INTR	0x01
188 #define	ADD_PVT		0x02
189 #define	SETUP_REGS	0x04
190 #define	NEXUS_REGISTER	0x08
191 #define	PROP_CREATE	0x10
192 #define	IMUTEX		0x20
193 #define	ALLOCATE_PVT	0x40
194 #define	MINOR_NODE	0x80
195 
196 #ifdef	__cplusplus
197 }
198 #endif
199 
200 #endif /* _PCF8584_H */
201