1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 /* 27 * PCI nexus utility routines: 28 * property and config routines for attach() 29 * reg/intr/range/assigned-address property routines for bus_map() 30 * init_child() 31 * fault handling 32 */ 33 34 #include <sys/types.h> 35 #include <sys/kmem.h> 36 #include <sys/async.h> 37 #include <sys/sysmacros.h> 38 #include <sys/sunddi.h> 39 #include <sys/sunndi.h> 40 #include <sys/ddi_impldefs.h> 41 #include "px_obj.h" 42 #include <sys/pcie_pwr.h> 43 44 /*LINTLIBRARY*/ 45 46 /* 47 * px_get_props 48 * 49 * This function is called from the attach routine to get the key 50 * properties of the pci nodes. 51 * 52 * used by: px_attach() 53 * 54 * return value: DDI_FAILURE on failure 55 */ 56 int 57 px_get_props(px_t *px_p, dev_info_t *dip) 58 { 59 int i, no_of_intrs; 60 61 /* 62 * Get the bus-ranges property. 63 */ 64 i = sizeof (px_p->px_bus_range); 65 if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 66 "bus-range", (caddr_t)&px_p->px_bus_range, &i) != DDI_SUCCESS) { 67 cmn_err(CE_WARN, "%s%d: no bus-range property\n", 68 ddi_driver_name(dip), ddi_get_instance(dip)); 69 return (DDI_FAILURE); 70 } 71 DBG(DBG_ATTACH, dip, "get_px_properties: bus-range (%x,%x)\n", 72 px_p->px_bus_range.lo, px_p->px_bus_range.hi); 73 74 /* 75 * Get the interrupts property. 76 */ 77 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 78 "interrupts", (caddr_t)&px_p->px_inos, 79 &px_p->px_inos_len) != DDI_SUCCESS) { 80 81 cmn_err(CE_WARN, "%s%d: no interrupts property\n", 82 ddi_driver_name(dip), ddi_get_instance(dip)); 83 return (DDI_FAILURE); 84 } 85 86 /* 87 * figure out number of interrupts in the "interrupts" property 88 * and convert them all into ino. 89 */ 90 i = ddi_getprop(DDI_DEV_T_ANY, dip, 0, "#interrupt-cells", 1); 91 i = CELLS_1275_TO_BYTES(i); 92 no_of_intrs = px_p->px_inos_len / i; 93 for (i = 0; i < no_of_intrs; i++) 94 px_p->px_inos[i] = px_p->px_inos[i] & 0x3F; 95 96 /* 97 * Get the ranges property. 98 */ 99 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "ranges", 100 (caddr_t)&px_p->px_ranges_p, &px_p->px_ranges_length) != 101 DDI_SUCCESS) { 102 103 cmn_err(CE_WARN, "%s%d: no ranges property\n", 104 ddi_driver_name(dip), ddi_get_instance(dip)); 105 kmem_free(px_p->px_inos, px_p->px_inos_len); 106 return (DDI_FAILURE); 107 } 108 109 return (DDI_SUCCESS); 110 } 111 112 /* 113 * px_free_props: 114 * 115 * This routine frees the memory used to cache the "interrupts" 116 * and "ranges" properties of the pci bus device node. 117 * 118 * used by: px_detach() 119 * 120 * return value: none 121 */ 122 void 123 px_free_props(px_t *px_p) 124 { 125 kmem_free(px_p->px_inos, px_p->px_inos_len); 126 kmem_free(px_p->px_ranges_p, px_p->px_ranges_length); 127 } 128 129 /* 130 * px_reloc_reg 131 * 132 * If the "reg" entry (*px_rp) is relocatable, lookup "assigned-addresses" 133 * property to fetch corresponding relocated address. 134 * 135 * used by: px_map() 136 * 137 * return value: 138 * 139 * DDI_SUCCESS - on success 140 * DDI_ME_INVAL - regspec is invalid 141 */ 142 int 143 px_reloc_reg(dev_info_t *dip, dev_info_t *rdip, px_t *px_p, 144 pci_regspec_t *rp) 145 { 146 int assign_len, assign_entries, i; 147 pci_regspec_t *assign_p; 148 uint32_t phys_hi = rp->pci_phys_hi; 149 uint32_t space_type = phys_hi & PCI_REG_ADDR_M; /* 28-bit */ 150 151 DBG(DBG_MAP | DBG_CONT, dip, "\tpx_reloc_reg fr: %x.%x.%x %x.%x\n", 152 rp->pci_phys_hi, rp->pci_phys_mid, rp->pci_phys_low, 153 rp->pci_size_hi, rp->pci_size_low); 154 155 if (space_type == PCI_ADDR_CONFIG || phys_hi & PCI_RELOCAT_B) 156 return (DDI_SUCCESS); 157 158 /* 159 * Hot plug will be taken care of later 160 * if (px_p->hotplug_capable == B_FALSE) 161 */ 162 { 163 uint32_t bus = PCI_REG_BUS_G(phys_hi); 164 if (bus < px_p->px_bus_range.lo || 165 bus > px_p->px_bus_range.hi) { 166 DBG(DBG_MAP | DBG_CONT, dip, "bad bus# (%x)\n", bus); 167 return (DDI_ME_INVAL); 168 } 169 } 170 171 i = ddi_getlongprop(DDI_DEV_T_ANY, rdip, DDI_PROP_DONTPASS, 172 "assigned-addresses", (caddr_t)&assign_p, &assign_len); 173 174 if (i) { 175 DBG(DBG_MAP | DBG_CONT, dip, "%s%d: assigned-addresses %d\n", 176 ddi_driver_name(rdip), ddi_get_instance(rdip), i); 177 return (DDI_ME_INVAL); 178 } 179 180 assign_entries = assign_len / sizeof (pci_regspec_t); 181 for (i = 0; i < assign_entries; i++, assign_p++) { 182 uint32_t assign_type = assign_p->pci_phys_hi & PCI_REG_ADDR_M; 183 uint32_t assign_addr = PCI_REG_BDFR_G(assign_p->pci_phys_hi); 184 185 if (PCI_REG_BDFR_G(phys_hi) != assign_addr) 186 continue; 187 if (space_type == assign_type) { /* exact match */ 188 rp->pci_phys_low += assign_p->pci_phys_low; 189 if (space_type == PCI_ADDR_MEM64) 190 rp->pci_phys_mid += assign_p->pci_phys_mid; 191 break; 192 } 193 if (space_type == PCI_ADDR_MEM64 && 194 assign_type == PCI_ADDR_MEM32) { 195 rp->pci_phys_low += assign_p->pci_phys_low; 196 rp->pci_phys_hi ^= PCI_ADDR_MEM64 ^ PCI_ADDR_MEM32; 197 break; 198 } 199 } 200 kmem_free(assign_p - i, assign_len); 201 DBG(DBG_MAP | DBG_CONT, dip, "\tpx_reloc_reg to: %x.%x.%x %x.%x <%d>\n", 202 rp->pci_phys_hi, rp->pci_phys_mid, rp->pci_phys_low, 203 rp->pci_size_hi, rp->pci_size_low, i); 204 return (i < assign_entries ? DDI_SUCCESS : DDI_ME_INVAL); 205 } 206 207 /* 208 * use "ranges" to translate relocated pci regspec into parent space 209 */ 210 int 211 px_xlate_reg(px_t *px_p, pci_regspec_t *px_rp, struct regspec *new_rp) 212 { 213 int n; 214 pci_ranges_t *rng_p = px_p->px_ranges_p; 215 int rng_n = px_p->px_ranges_length / sizeof (pci_ranges_t); 216 uint32_t space_type = PCI_REG_ADDR_G(px_rp->pci_phys_hi); 217 uint64_t reg_begin, reg_end, reg_sz; 218 uint64_t rng_begin, rng_end, rng_sz; 219 uint64_t addr; 220 221 reg_begin = (uint64_t)px_rp->pci_phys_mid << 32 | px_rp->pci_phys_low; 222 reg_sz = (uint64_t)px_rp->pci_size_hi << 32 | px_rp->pci_size_low; 223 if (space_type == PCI_REG_ADDR_G(PCI_ADDR_CONFIG)) { 224 if (reg_begin > PCI_CONF_HDR_SIZE) 225 return (DDI_ME_INVAL); 226 reg_sz = reg_sz ? MIN(reg_sz, PCI_CONF_HDR_SIZE) : 227 PCI_CONF_HDR_SIZE; 228 reg_begin += px_rp->pci_phys_hi << 4; 229 } 230 reg_end = reg_begin + reg_sz - 1; 231 232 for (n = 0; n < rng_n; n++, rng_p++) { 233 if (space_type != PCI_REG_ADDR_G(rng_p->child_high)) 234 continue; /* not the same space type */ 235 236 rng_begin = (uint64_t)rng_p->child_mid << 32 | rng_p->child_low; 237 rng_sz = (uint64_t)rng_p->size_high << 32 | rng_p->size_low; 238 if (space_type == PCI_REG_ADDR_G(PCI_ADDR_CONFIG)) 239 rng_begin += rng_p->child_high; 240 241 rng_end = rng_begin + rng_sz - 1; 242 if (reg_begin >= rng_begin && reg_end <= rng_end) 243 break; 244 } 245 if (n >= rng_n) 246 return (DDI_ME_REGSPEC_RANGE); 247 248 addr = reg_begin - rng_begin + ((uint64_t)rng_p->parent_high << 32 | 249 rng_p->parent_low); 250 new_rp->regspec_addr = (uint32_t)addr; 251 new_rp->regspec_bustype = (uint32_t)(addr >> 32); 252 new_rp->regspec_size = (uint32_t)reg_sz; 253 DBG(DBG_MAP | DBG_CONT, px_p->px_dip, 254 "\tpx_xlate_reg: entry %d new_rp %x.%x %x\n", 255 n, new_rp->regspec_bustype, new_rp->regspec_addr, reg_sz); 256 257 return (DDI_SUCCESS); 258 } 259 260 /* 261 * px_report_dev 262 * 263 * This function is called from our control ops routine on a 264 * DDI_CTLOPS_REPORTDEV request. 265 * 266 * The display format is 267 * 268 * <name><inst> at <pname><pinst> device <dev> function <func> 269 * 270 * where 271 * 272 * <name> this device's name property 273 * <inst> this device's instance number 274 * <name> parent device's name property 275 * <inst> parent device's instance number 276 * <dev> this device's device number 277 * <func> this device's function number 278 */ 279 int 280 px_report_dev(dev_info_t *dip) 281 { 282 if (dip == (dev_info_t *)0) 283 return (DDI_FAILURE); 284 cmn_err(CE_CONT, "?PCI Express-device: %s@%s, %s%d\n", 285 ddi_node_name(dip), ddi_get_name_addr(dip), 286 ddi_driver_name(dip), 287 ddi_get_instance(dip)); 288 return (DDI_SUCCESS); 289 } 290 291 292 /* 293 * reg property for pcimem nodes that covers the entire address 294 * space for the node: config, io, or memory. 295 */ 296 pci_regspec_t pci_pcimem_reg[3] = 297 { 298 {PCI_ADDR_CONFIG, 0, 0, 0, 0x800000 }, 299 {(uint_t)(PCI_ADDR_IO|PCI_RELOCAT_B), 0, 0, 0, PX_IO_SIZE }, 300 {(uint_t)(PCI_ADDR_MEM32|PCI_RELOCAT_B), 0, 0, 0, PX_MEM_SIZE } 301 }; 302 303 /* 304 * px_name_child 305 * 306 * This function is called from init_child to name a node. It is 307 * also passed as a callback for node merging functions. 308 * 309 * return value: DDI_SUCCESS, DDI_FAILURE 310 */ 311 static int 312 px_name_child(dev_info_t *child, char *name, int namelen) 313 { 314 pci_regspec_t *pci_rp; 315 int reglen; 316 uint_t func; 317 char **unit_addr; 318 uint_t n; 319 320 /* 321 * Set the address portion of the node name based on 322 * unit-address property, if it exists. 323 * The interpretation of the unit-address is DD[,F] 324 * where DD is the device id and F is the function. 325 */ 326 if (ddi_prop_lookup_string_array(DDI_DEV_T_ANY, child, 327 DDI_PROP_DONTPASS, "unit-address", &unit_addr, &n) == 328 DDI_PROP_SUCCESS) { 329 if (n != 1 || *unit_addr == NULL || **unit_addr == 0) { 330 cmn_err(CE_WARN, "unit-address property in %s.conf" 331 " not well-formed", ddi_driver_name(child)); 332 ddi_prop_free(unit_addr); 333 return (DDI_FAILURE); 334 } 335 (void) snprintf(name, namelen, "%s", *unit_addr); 336 ddi_prop_free(unit_addr); 337 return (DDI_SUCCESS); 338 } 339 340 /* 341 * The unit-address property is does not exist. Set the address 342 * portion of the node name based on the function and device number. 343 */ 344 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, 345 "reg", (int **)&pci_rp, (uint_t *)®len) == DDI_SUCCESS) { 346 if (((reglen * sizeof (int)) % sizeof (pci_regspec_t)) != 0) { 347 cmn_err(CE_WARN, "reg property not well-formed"); 348 return (DDI_FAILURE); 349 } 350 351 func = PCI_REG_FUNC_G(pci_rp[0].pci_phys_hi); 352 if (func != 0) 353 (void) snprintf(name, namelen, "%x,%x", 354 PCI_REG_DEV_G(pci_rp[0].pci_phys_hi), func); 355 else 356 (void) snprintf(name, namelen, "%x", 357 PCI_REG_DEV_G(pci_rp[0].pci_phys_hi)); 358 ddi_prop_free(pci_rp); 359 return (DDI_SUCCESS); 360 } 361 362 cmn_err(CE_WARN, "cannot name pci child '%s'", ddi_node_name(child)); 363 return (DDI_FAILURE); 364 } 365 366 int 367 px_uninit_child(px_t *px_p, dev_info_t *child) 368 { 369 DBG(DBG_INIT_CLD, px_p->px_dip, 370 "DDI_CTLOPS_UNINITCHILD: arg=%s%d\n", 371 ddi_driver_name(child), ddi_get_instance(child)); 372 373 ddi_set_name_addr(child, NULL); 374 ddi_remove_minor_node(child, NULL); 375 376 /* 377 * XXX Clear parent private data used as a flag to disable 378 * iommu BDF protection 379 */ 380 if ((intptr_t)ddi_get_parent_data(child) == 1) 381 ddi_set_parent_data(child, NULL); 382 383 impl_rem_dev_props(child); 384 385 DBG(DBG_PWR, ddi_get_parent(child), "\n\n"); 386 387 pcie_uninitchild(child); 388 389 return (DDI_SUCCESS); 390 } 391 392 /* 393 * px_init_child 394 * 395 * This function is called from our control ops routine on a 396 * DDI_CTLOPS_INITCHILD request. It builds and sets the device's 397 * parent private data area. 398 * 399 * used by: pci_ctlops() 400 * 401 * return value: none 402 */ 403 int 404 px_init_child(px_t *px_p, dev_info_t *child) 405 { 406 dev_info_t *parent_dip = px_p->px_dip; 407 pci_regspec_t *pci_rp; 408 char name[10]; 409 int i, no_config; 410 intptr_t ppd = NULL; 411 412 /* 413 * The following is a special case for pcimem nodes. 414 * For these nodes we create a reg property with a 415 * single entry that covers the entire address space 416 * for the node (config, io or memory). 417 */ 418 if (strcmp(ddi_driver_name(child), "pcimem") == 0) { 419 (void) ddi_prop_create(DDI_DEV_T_NONE, child, 420 DDI_PROP_CANSLEEP, "reg", (caddr_t)pci_pcimem_reg, 421 sizeof (pci_pcimem_reg)); 422 ddi_set_name_addr(child, "0"); 423 ddi_set_parent_data(child, NULL); 424 return (DDI_SUCCESS); 425 } 426 427 /* 428 * Check whether the node has config space or is a hard decode 429 * node (possibly created by a driver.conf file). 430 */ 431 no_config = ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, 432 "no-config", 0); 433 434 /* 435 * XXX set ppd to 1 to disable iommu BDF protection 436 * It relies on unused parent private data for PCI devices. 437 */ 438 if (ddi_prop_exists(DDI_DEV_T_NONE, child, DDI_PROP_DONTPASS, 439 "dvma-share")) 440 ppd = 1; 441 442 /* 443 * Pseudo nodes indicate a prototype node with per-instance 444 * properties to be merged into the real h/w device node. 445 * However, do not merge if the no-config property is set 446 * (see PSARC 2000/088). 447 */ 448 if ((ndi_dev_is_persistent_node(child) == 0) && (no_config == 0)) { 449 extern int pci_allow_pseudo_children; 450 451 if (ddi_getlongprop(DDI_DEV_T_ANY, child, 452 DDI_PROP_DONTPASS, "reg", (caddr_t)&pci_rp, &i) == 453 DDI_SUCCESS) { 454 cmn_err(CE_WARN, "cannot merge prototype from %s.conf", 455 ddi_driver_name(child)); 456 kmem_free(pci_rp, i); 457 return (DDI_NOT_WELL_FORMED); 458 } 459 /* 460 * Name the child 461 */ 462 if (px_name_child(child, name, 10) != DDI_SUCCESS) 463 return (DDI_FAILURE); 464 465 ddi_set_name_addr(child, name); 466 ddi_set_parent_data(child, (void *)ppd); 467 468 /* 469 * Try to merge the properties from this prototype 470 * node into real h/w nodes. 471 */ 472 if (ndi_merge_node(child, px_name_child) == DDI_SUCCESS) { 473 /* 474 * Merged ok - return failure to remove the node. 475 */ 476 ddi_set_name_addr(child, NULL); 477 return (DDI_FAILURE); 478 } 479 480 /* workaround for ddivs to run under PCI */ 481 if (pci_allow_pseudo_children) 482 return (DDI_SUCCESS); 483 484 cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged", 485 ddi_driver_name(child), ddi_get_name_addr(child), 486 ddi_driver_name(child)); 487 ddi_set_name_addr(child, NULL); 488 return (DDI_NOT_WELL_FORMED); 489 } 490 491 if (px_name_child(child, name, 10) != DDI_SUCCESS) 492 return (DDI_FAILURE); 493 ddi_set_name_addr(child, name); 494 495 if (no_config != 0) { 496 /* 497 * There is no config space so there's nothing more to do. 498 */ 499 return (DDI_SUCCESS); 500 } 501 502 if (pcie_pm_hold(parent_dip) != DDI_SUCCESS) { 503 DBG(DBG_PWR, parent_dip, 504 "INITCHILD: px_pm_hold failed\n"); 505 return (DDI_FAILURE); 506 } 507 /* Any return of DDI_FAILURE after this must call px_pm_release */ 508 509 /* 510 * If configuration registers were previously saved by 511 * child (before it went to D3), then let the child do the 512 * restore to set up the config regs as it'll first need to 513 * power the device out of D3. 514 */ 515 if (ddi_prop_exists(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, 516 "config-regs-saved-by-child") == 1) { 517 DBG(DBG_PWR, child, 518 "INITCHILD: config regs to be restored by child\n"); 519 520 return (DDI_SUCCESS); 521 } 522 523 DBG(DBG_PWR, parent_dip, 524 "INITCHILD: config regs setup for %s@%s\n", 525 ddi_node_name(child), ddi_get_name_addr(child)); 526 527 ddi_set_parent_data(child, (void *)ppd); 528 if (pcie_init_bus(child)) 529 (void) pcie_initchild(child); 530 531 /* 532 * Handle chip specific init-child tasks. 533 */ 534 pcie_pm_release(parent_dip); 535 536 return (DDI_SUCCESS); 537 } 538 539 /* 540 * px_get_reg_set_size 541 * 542 * Given a dev info pointer to a pci child and a register number, this 543 * routine returns the size element of that reg set property. 544 * 545 * used by: pci_ctlops() - DDI_CTLOPS_REGSIZE 546 * 547 * return value: size of reg set on success, 0 on error 548 */ 549 off_t 550 px_get_reg_set_size(dev_info_t *child, int rnumber) 551 { 552 pci_regspec_t *pci_rp; 553 off_t size = 0; 554 int i; 555 556 if (rnumber < 0) 557 return (0); 558 559 /* 560 * Get the reg property for the device. 561 */ 562 if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "reg", 563 (caddr_t)&pci_rp, &i) != DDI_SUCCESS) 564 return (0); 565 566 if (rnumber >= (i / (int)sizeof (pci_regspec_t))) 567 goto done; 568 569 size = pci_rp[rnumber].pci_size_low | 570 ((uint64_t)pci_rp[rnumber].pci_size_hi << 32); 571 done: 572 kmem_free(pci_rp, i); 573 return (size); 574 } 575 576 577 /* 578 * px_get_nreg_set 579 * 580 * Given a dev info pointer to a pci child, this routine returns the 581 * number of sets in its "reg" property. 582 * 583 * used by: pci_ctlops() - DDI_CTLOPS_NREGS 584 * 585 * return value: # of reg sets on success, zero on error 586 */ 587 uint_t 588 px_get_nreg_set(dev_info_t *child) 589 { 590 pci_regspec_t *pci_rp; 591 int i, n; 592 593 /* 594 * Get the reg property for the device. 595 */ 596 if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "reg", 597 (caddr_t)&pci_rp, &i) != DDI_SUCCESS) 598 return (0); 599 600 n = i / (int)sizeof (pci_regspec_t); 601 kmem_free(pci_rp, i); 602 return (n); 603 } 604 605 606 /* 607 * px_get_nintr 608 * 609 * Given a dev info pointer to a pci child, this routine returns the 610 * number of items in its "interrupts" property. 611 * 612 * used by: pci_ctlops() - DDI_CTLOPS_NREGS 613 * 614 * return value: # of interrupts on success, zero on error 615 */ 616 uint_t 617 px_get_nintr(dev_info_t *child) 618 { 619 int *pci_ip; 620 int i, n; 621 622 if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, 623 "interrupts", (caddr_t)&pci_ip, &i) != DDI_SUCCESS) 624 return (0); 625 626 n = i / (int)sizeof (uint_t); 627 kmem_free(pci_ip, i); 628 return (n); 629 } 630 631 uint64_t 632 px_get_cfg_pabase(px_t *px_p) 633 { 634 int i; 635 pci_ranges_t *rangep = px_p->px_ranges_p; 636 int nrange = px_p->px_ranges_length / sizeof (pci_ranges_t); 637 uint32_t cfg_space_type = PCI_REG_ADDR_G(PCI_ADDR_CONFIG); 638 639 ASSERT(cfg_space_type == 0); 640 641 for (i = 0; i < nrange; i++, rangep++) { 642 if (PCI_REG_ADDR_G(rangep->child_high) == cfg_space_type) 643 break; 644 } 645 646 if (i >= nrange) 647 cmn_err(CE_PANIC, "no cfg space in px(%p) ranges prop.\n", 648 px_p); 649 650 return (((uint64_t)rangep->parent_high << 32) | rangep->parent_low); 651 } 652 653 /* 654 * decodes standard PCI config space 16bit error status reg 655 */ 656 int 657 px_log_cfg_err(dev_info_t *dip, ushort_t status_reg, char *err_msg) 658 { 659 int nerr = ddi_get_instance(dip); /* temp for instance */ 660 uint64_t perr_fatal = px_perr_fatal & (1 << nerr); 661 uint64_t serr_fatal = px_serr_fatal & (1 << nerr); 662 nerr = 0; 663 664 if ((status_reg & PCI_STAT_PERROR) && perr_fatal) 665 nerr++; 666 if ((status_reg & PCI_STAT_S_SYSERR) && serr_fatal) 667 nerr++; 668 if (status_reg & PCI_STAT_R_MAST_AB) 669 nerr++; 670 if ((status_reg & PCI_STAT_S_PERROR) && perr_fatal) 671 nerr++; 672 673 cmn_err(CE_WARN, "%s%d: %sPCI Express config space CSR=0x%b", 674 ddi_driver_name(dip), ddi_get_instance(dip), err_msg, 675 (uint32_t)status_reg, PX_STATUS_BITS); 676 677 return (nerr); 678 } 679