xref: /titanic_50/usr/src/uts/sparc/scsa2usb/Makefile (revision 9584cebb1c69707f4c67306b661c2ed47d8676f1)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23# Use is subject to license terms.
24#
25# uts/sparc/scsa2usb/Makefile
26#
27#	This makefile drives the production of the scsa2usb driver
28#	kernel module. sparc architecture dependent
29#
30
31
32#
33#	Path to the base of the uts directory tree (usually /usr/src/uts).
34#
35UTSBASE = ../..
36
37#
38#	Define the module and object file sets.
39#
40MODULE		= scsa2usb
41OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
42LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
43ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
44CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
45WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
46WARLOCK_OK	= $(MODULE).ok
47WLCMD_DIR       = $(UTSBASE)/common/io/warlock
48
49#
50#	Include common rules.
51#
52include $(UTSBASE)/sparc/Makefile.sparc
53
54#
55# lint pass one enforcement
56#
57CFLAGS += $(CCVERBOSE)
58
59# depends on misc/usba misc/scsi
60#
61LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
62
63#
64#	Define targets
65#
66ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
67LINT_TARGET	= $(MODULE).lint
68INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
69
70CERRWARN	+= -_gcc=-Wno-unused-label
71CERRWARN	+= -_gcc=-Wno-uninitialized
72
73#
74# For now, disable these lint checks; maintainers should endeavor
75# to investigate and remove these for maximum lint coverage.
76# Please do not carry these forward to new Makefiles.
77#
78LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
79
80.KEEP_STATE:
81
82all:		$(ALL_DEPS)
83
84def:		$(DEF_DEPS)
85
86clean:		$(CLEAN_DEPS)
87		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
88
89clobber:	$(CLOBBER_DEPS)
90		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
91
92lint:		$(LINT_DEPS)
93
94modlintlib:	$(MODLINTLIB_DEPS)
95
96clean.lint:	$(CLEAN_LINT_DEPS)
97
98install:	$(INSTALL_DEPS)
99
100#
101#	Include common targets.
102#
103include $(UTSBASE)/sparc/Makefile.targ
104
105#
106#	Defines for local commands.
107#
108WARLOCK		= warlock
109WLCC		= wlcc
110TOUCH		= touch
111TEST		= test
112
113#
114#	lock_lint rules
115#
116USBA_FILES = $(USBA_WITHOUT_WUSB_OBJS:%.o=../usba/%.ll)
117UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
118OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
119EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
120SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
121ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
122SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
123CMLB_FILES = $(CMLB_OBJS:%.o=-l ../cmlb/%.ll)
124
125warlock: $(WARLOCK_OK) warlock_with_usba
126
127$(WARLOCK_OK): $(WARLOCK_OUT) $(WLCMD_DIR)/scsa2usb.wlcmd warlock_ddi.files \
128	scsi.files
129	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT)  \
130		../warlock/scsi.ll \
131		-l ../warlock/ddi_dki_impl.ll \
132		$(SCSI_FILES)
133	$(TOUCH) $@
134
135%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
136		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
137		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
138		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
139	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
140
141warlock_with_usba: $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd  $(WARLOCK_OUT) \
142	usba_files ohci_files ehci_files uhci_files warlock_ddi.files sd.files \
143	st.files scsi.files cmlb.files
144	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
145		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
146		$(SD_FILES) \
147		$(ST_FILES) \
148		$(SCSI_FILES) \
149		$(CMLB_FILES) \
150		$(WARLOCK_OUT) \
151		-l ../warlock/ddi_dki_impl.ll
152
153usba_files:
154	@cd ../usba;pwd; $(MAKE) warlock
155
156uhci_files:
157	@cd ../uhci;pwd; $(MAKE) warlock
158
159ohci_files:
160	@cd ../ohci;pwd; $(MAKE) warlock
161
162ehci_files:
163	@cd ../ehci;pwd; $(MAKE) warlock
164
165warlock_ddi.files:
166	@cd ../warlock; pwd; $(MAKE) warlock
167
168scsi.files:
169	@cd ../scsi; pwd; $(MAKE) warlock
170
171sd.files:
172	@cd ../sd; pwd; $(MAKE) warlock_alone
173
174cmlb.files:
175	@cd ../cmlb; pwd; $(MAKE) warlock
176
177st.files:
178	@cd ../st; pwd; $(MAKE) warlock_alone
179