xref: /titanic_50/usr/src/uts/sparc/scsa2usb/Makefile (revision 3fb517f786391b507780c78aabb8d98bfea9efe9)
1 #
2 # CDDL HEADER START
3 #
4 # The contents of this file are subject to the terms of the
5 # Common Development and Distribution License (the "License").
6 # You may not use this file except in compliance with the License.
7 #
8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 # or http://www.opensolaris.org/os/licensing.
10 # See the License for the specific language governing permissions
11 # and limitations under the License.
12 #
13 # When distributing Covered Code, include this CDDL HEADER in each
14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 # If applicable, add the following below this CDDL HEADER, with the
16 # fields enclosed by brackets "[]" replaced with your own identifying
17 # information: Portions Copyright [yyyy] [name of copyright owner]
18 #
19 # CDDL HEADER END
20 #
21 #
22 # Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23 # Use is subject to license terms.
24 #
25 # uts/sparc/scsa2usb/Makefile
26 #
27 #	This makefile drives the production of the scsa2usb driver
28 #	kernel module. sparc architecture dependent
29 #
30 
31 
32 #
33 #	Path to the base of the uts directory tree (usually /usr/src/uts).
34 #
35 UTSBASE = ../..
36 
37 #
38 #	Define the module and object file sets.
39 #
40 MODULE		= scsa2usb
41 OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
42 LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
43 ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
44 CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
45 WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
46 WARLOCK_OK	= $(MODULE).ok
47 WLCMD_DIR       = $(UTSBASE)/common/io/warlock
48 
49 #
50 #	Include common rules.
51 #
52 include $(UTSBASE)/sparc/Makefile.sparc
53 
54 #
55 # lint pass one enforcement
56 #
57 CFLAGS += $(CCVERBOSE)
58 
59 # depends on misc/usba misc/scsi
60 #
61 LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
62 
63 #
64 #	Define targets
65 #
66 ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
67 LINT_TARGET	= $(MODULE).lint
68 INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
69 
70 #
71 # For now, disable these lint checks; maintainers should endeavor
72 # to investigate and remove these for maximum lint coverage.
73 # Please do not carry these forward to new Makefiles.
74 #
75 LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
76 
77 .KEEP_STATE:
78 
79 all:		$(ALL_DEPS)
80 
81 def:		$(DEF_DEPS)
82 
83 clean:		$(CLEAN_DEPS)
84 		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
85 
86 clobber:	$(CLOBBER_DEPS)
87 		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
88 
89 lint:		$(LINT_DEPS)
90 
91 modlintlib:	$(MODLINTLIB_DEPS)
92 
93 clean.lint:	$(CLEAN_LINT_DEPS)
94 
95 install:	$(INSTALL_DEPS)
96 
97 #
98 #	Include common targets.
99 #
100 include $(UTSBASE)/sparc/Makefile.targ
101 
102 #
103 #	Defines for local commands.
104 #
105 WARLOCK		= warlock
106 WLCC		= wlcc
107 TOUCH		= touch
108 TEST		= test
109 
110 #
111 #	lock_lint rules
112 #
113 USBA_FILES = $(USBA_WITHOUT_WUSB_OBJS:%.o=../usba/%.ll)
114 UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
115 OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
116 EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
117 SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
118 ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
119 SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
120 CMLB_FILES = $(CMLB_OBJS:%.o=-l ../cmlb/%.ll)
121 
122 warlock: $(WARLOCK_OK) warlock_with_usba
123 
124 $(WARLOCK_OK): $(WARLOCK_OUT) $(WLCMD_DIR)/scsa2usb.wlcmd warlock_ddi.files \
125 	scsi.files
126 	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT)  \
127 		../warlock/scsi.ll \
128 		-l ../warlock/ddi_dki_impl.ll \
129 		$(SCSI_FILES)
130 	$(TOUCH) $@
131 
132 %.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
133 		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
134 		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
135 		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
136 	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
137 
138 warlock_with_usba: $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd  $(WARLOCK_OUT) \
139 	usba_files ohci_files ehci_files uhci_files warlock_ddi.files sd.files \
140 	st.files scsi.files cmlb.files
141 	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
142 		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
143 		$(SD_FILES) \
144 		$(ST_FILES) \
145 		$(SCSI_FILES) \
146 		$(CMLB_FILES) \
147 		$(WARLOCK_OUT) \
148 		-l ../warlock/ddi_dki_impl.ll
149 
150 usba_files:
151 	@cd ../usba;pwd; $(MAKE) warlock
152 
153 uhci_files:
154 	@cd ../uhci;pwd; $(MAKE) warlock
155 
156 ohci_files:
157 	@cd ../ohci;pwd; $(MAKE) warlock
158 
159 ehci_files:
160 	@cd ../ehci;pwd; $(MAKE) warlock
161 
162 warlock_ddi.files:
163 	@cd ../warlock; pwd; $(MAKE) warlock
164 
165 scsi.files:
166 	@cd ../scsi; pwd; $(MAKE) warlock
167 
168 sd.files:
169 	@cd ../sd; pwd; $(MAKE) warlock_alone
170 
171 cmlb.files:
172 	@cd ../cmlb; pwd; $(MAKE) warlock
173 
174 st.files:
175 	@cd ../st; pwd; $(MAKE) warlock_alone
176