1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 /* 27 * Copyright (c) 2009, Intel Corporation. 28 * All rights reserved. 29 */ 30 /* 31 * ACPI CA OSL for Solaris x86 32 */ 33 34 #include <sys/types.h> 35 #include <sys/kmem.h> 36 #include <sys/psm.h> 37 #include <sys/pci_cfgspace.h> 38 #include <sys/apic.h> 39 #include <sys/ddi.h> 40 #include <sys/sunddi.h> 41 #include <sys/sunndi.h> 42 #include <sys/pci.h> 43 #include <sys/kobj.h> 44 #include <sys/taskq.h> 45 #include <sys/strlog.h> 46 #include <sys/note.h> 47 48 #include <sys/acpi/acpi.h> 49 #include <sys/acpica.h> 50 #include <sys/acpi/acinterp.h> 51 52 #define MAX_DAT_FILE_SIZE (64*1024) 53 54 /* local functions */ 55 static int CompressEisaID(char *np); 56 57 static void scan_d2a_map(void); 58 static void scan_d2a_subtree(dev_info_t *dip, ACPI_HANDLE acpiobj, int bus); 59 60 static int acpica_query_bbn_problem(void); 61 static int acpica_find_pcibus(int busno, ACPI_HANDLE *rh); 62 static int acpica_eval_hid(ACPI_HANDLE dev, char *method, int *rint); 63 static ACPI_STATUS acpica_set_devinfo(ACPI_HANDLE, dev_info_t *); 64 static ACPI_STATUS acpica_unset_devinfo(ACPI_HANDLE); 65 static void acpica_devinfo_handler(ACPI_HANDLE, UINT32, void *); 66 67 /* 68 * Event queue vars 69 */ 70 int acpica_eventq_init = 0; 71 ddi_taskq_t *osl_eventq[OSL_EC_BURST_HANDLER+1]; 72 73 /* 74 * Priorities relative to minclsyspri that each taskq 75 * run at; OSL_NOTIFY_HANDLER needs to run at a higher 76 * priority than OSL_GPE_HANDLER. There's an implicit 77 * assumption that no priority here results in exceeding 78 * maxclsyspri. 79 * Note: these initializations need to match the order of 80 * ACPI_EXECUTE_TYPE. 81 */ 82 int osl_eventq_pri_delta[OSL_EC_BURST_HANDLER+1] = { 83 0, /* OSL_GLOBAL_LOCK_HANDLER */ 84 2, /* OSL_NOTIFY_HANDLER */ 85 0, /* OSL_GPE_HANDLER */ 86 0, /* OSL_DEBUGGER_THREAD */ 87 0, /* OSL_EC_POLL_HANDLER */ 88 0 /* OSL_EC_BURST_HANDLER */ 89 }; 90 91 /* 92 * Note, if you change this path, you need to update 93 * /boot/grub/filelist.ramdisk and pkg SUNWckr/prototype_i386 94 */ 95 static char *acpi_table_path = "/boot/acpi/tables/"; 96 97 /* non-zero while scan_d2a_map() is working */ 98 static int scanning_d2a_map = 0; 99 static int d2a_done = 0; 100 101 /* features supported by ACPICA and ACPI device configuration. */ 102 uint64_t acpica_core_features = 0; 103 static uint64_t acpica_devcfg_features = 0; 104 105 /* set by acpi_poweroff() in PSMs and appm_ioctl() in acpippm for S3 */ 106 int acpica_use_safe_delay = 0; 107 108 /* CPU mapping data */ 109 struct cpu_map_item { 110 processorid_t cpu_id; 111 UINT32 proc_id; 112 UINT32 apic_id; 113 ACPI_HANDLE obj; 114 }; 115 116 static kmutex_t cpu_map_lock; 117 static struct cpu_map_item **cpu_map = NULL; 118 static int cpu_map_count_max = 0; 119 static int cpu_map_count = 0; 120 static int cpu_map_built = 0; 121 122 static int acpi_has_broken_bbn = -1; 123 124 /* buffer for AcpiOsVprintf() */ 125 #define ACPI_OSL_PR_BUFLEN 1024 126 static char *acpi_osl_pr_buffer = NULL; 127 static int acpi_osl_pr_buflen; 128 129 #define D2A_DEBUG 130 131 /* 132 * 133 */ 134 static void 135 discard_event_queues() 136 { 137 int i; 138 139 /* 140 * destroy event queues 141 */ 142 for (i = OSL_GLOBAL_LOCK_HANDLER; i <= OSL_EC_BURST_HANDLER; i++) { 143 if (osl_eventq[i]) 144 ddi_taskq_destroy(osl_eventq[i]); 145 } 146 } 147 148 149 /* 150 * 151 */ 152 static ACPI_STATUS 153 init_event_queues() 154 { 155 char namebuf[32]; 156 int i, error = 0; 157 158 /* 159 * Initialize event queues 160 */ 161 162 /* Always allocate only 1 thread per queue to force FIFO execution */ 163 for (i = OSL_GLOBAL_LOCK_HANDLER; i <= OSL_EC_BURST_HANDLER; i++) { 164 snprintf(namebuf, 32, "ACPI%d", i); 165 osl_eventq[i] = ddi_taskq_create(NULL, namebuf, 1, 166 osl_eventq_pri_delta[i] + minclsyspri, 0); 167 if (osl_eventq[i] == NULL) 168 error++; 169 } 170 171 if (error != 0) { 172 discard_event_queues(); 173 #ifdef DEBUG 174 cmn_err(CE_WARN, "!acpica: could not initialize event queues"); 175 #endif 176 return (AE_ERROR); 177 } 178 179 acpica_eventq_init = 1; 180 return (AE_OK); 181 } 182 183 /* 184 * One-time initialization of OSL layer 185 */ 186 ACPI_STATUS 187 AcpiOsInitialize(void) 188 { 189 /* 190 * Allocate buffer for AcpiOsVprintf() here to avoid 191 * kmem_alloc()/kmem_free() at high PIL 192 */ 193 acpi_osl_pr_buffer = kmem_alloc(ACPI_OSL_PR_BUFLEN, KM_SLEEP); 194 if (acpi_osl_pr_buffer != NULL) 195 acpi_osl_pr_buflen = ACPI_OSL_PR_BUFLEN; 196 197 return (AE_OK); 198 } 199 200 /* 201 * One-time shut-down of OSL layer 202 */ 203 ACPI_STATUS 204 AcpiOsTerminate(void) 205 { 206 207 if (acpi_osl_pr_buffer != NULL) 208 kmem_free(acpi_osl_pr_buffer, acpi_osl_pr_buflen); 209 210 discard_event_queues(); 211 return (AE_OK); 212 } 213 214 215 ACPI_PHYSICAL_ADDRESS 216 AcpiOsGetRootPointer() 217 { 218 ACPI_PHYSICAL_ADDRESS Address; 219 220 /* 221 * For EFI firmware, the root pointer is defined in EFI systab. 222 * The boot code process the table and put the physical address 223 * in the acpi-root-tab property. 224 */ 225 Address = ddi_prop_get_int(DDI_DEV_T_ANY, ddi_root_node(), 226 DDI_PROP_DONTPASS, "acpi-root-tab", NULL); 227 228 if ((Address == NULL) && ACPI_FAILURE(AcpiFindRootPointer(&Address))) 229 Address = NULL; 230 231 return (Address); 232 } 233 234 /*ARGSUSED*/ 235 ACPI_STATUS 236 AcpiOsPredefinedOverride(const ACPI_PREDEFINED_NAMES *InitVal, 237 ACPI_STRING *NewVal) 238 { 239 240 *NewVal = 0; 241 return (AE_OK); 242 } 243 244 static void 245 acpica_strncpy(char *dest, const char *src, int len) 246 { 247 248 /*LINTED*/ 249 while ((*dest++ = *src++) && (--len > 0)) 250 /* copy the string */; 251 *dest = '\0'; 252 } 253 254 ACPI_STATUS 255 AcpiOsTableOverride(ACPI_TABLE_HEADER *ExistingTable, 256 ACPI_TABLE_HEADER **NewTable) 257 { 258 char signature[5]; 259 char oemid[7]; 260 char oemtableid[9]; 261 struct _buf *file; 262 char *buf1, *buf2; 263 int count; 264 char acpi_table_loc[128]; 265 266 acpica_strncpy(signature, ExistingTable->Signature, 4); 267 acpica_strncpy(oemid, ExistingTable->OemId, 6); 268 acpica_strncpy(oemtableid, ExistingTable->OemTableId, 8); 269 270 #ifdef DEBUG 271 cmn_err(CE_NOTE, "!acpica: table [%s] v%d OEM ID [%s]" 272 " OEM TABLE ID [%s] OEM rev %x", 273 signature, ExistingTable->Revision, oemid, oemtableid, 274 ExistingTable->OemRevision); 275 #endif 276 277 /* File name format is "signature_oemid_oemtableid.dat" */ 278 (void) strcpy(acpi_table_loc, acpi_table_path); 279 (void) strcat(acpi_table_loc, signature); /* for example, DSDT */ 280 (void) strcat(acpi_table_loc, "_"); 281 (void) strcat(acpi_table_loc, oemid); /* for example, IntelR */ 282 (void) strcat(acpi_table_loc, "_"); 283 (void) strcat(acpi_table_loc, oemtableid); /* for example, AWRDACPI */ 284 (void) strcat(acpi_table_loc, ".dat"); 285 286 file = kobj_open_file(acpi_table_loc); 287 if (file == (struct _buf *)-1) { 288 *NewTable = 0; 289 return (AE_OK); 290 } else { 291 buf1 = (char *)kmem_alloc(MAX_DAT_FILE_SIZE, KM_SLEEP); 292 count = kobj_read_file(file, buf1, MAX_DAT_FILE_SIZE-1, 0); 293 if (count >= MAX_DAT_FILE_SIZE) { 294 cmn_err(CE_WARN, "!acpica: table %s file size too big", 295 acpi_table_loc); 296 *NewTable = 0; 297 } else { 298 buf2 = (char *)kmem_alloc(count, KM_SLEEP); 299 (void) memcpy(buf2, buf1, count); 300 *NewTable = (ACPI_TABLE_HEADER *)buf2; 301 cmn_err(CE_NOTE, "!acpica: replacing table: %s", 302 acpi_table_loc); 303 } 304 } 305 kobj_close_file(file); 306 kmem_free(buf1, MAX_DAT_FILE_SIZE); 307 308 return (AE_OK); 309 } 310 311 312 /* 313 * ACPI semaphore implementation 314 */ 315 typedef struct { 316 kmutex_t mutex; 317 kcondvar_t cv; 318 uint32_t available; 319 uint32_t initial; 320 uint32_t maximum; 321 } acpi_sema_t; 322 323 /* 324 * 325 */ 326 void 327 acpi_sema_init(acpi_sema_t *sp, unsigned max, unsigned count) 328 { 329 mutex_init(&sp->mutex, NULL, MUTEX_DRIVER, NULL); 330 cv_init(&sp->cv, NULL, CV_DRIVER, NULL); 331 /* no need to enter mutex here at creation */ 332 sp->available = count; 333 sp->initial = count; 334 sp->maximum = max; 335 } 336 337 /* 338 * 339 */ 340 void 341 acpi_sema_destroy(acpi_sema_t *sp) 342 { 343 344 cv_destroy(&sp->cv); 345 mutex_destroy(&sp->mutex); 346 } 347 348 /* 349 * 350 */ 351 ACPI_STATUS 352 acpi_sema_p(acpi_sema_t *sp, unsigned count, uint16_t wait_time) 353 { 354 ACPI_STATUS rv = AE_OK; 355 clock_t deadline; 356 357 mutex_enter(&sp->mutex); 358 359 if (sp->available >= count) { 360 /* 361 * Enough units available, no blocking 362 */ 363 sp->available -= count; 364 mutex_exit(&sp->mutex); 365 return (rv); 366 } else if (wait_time == 0) { 367 /* 368 * Not enough units available and timeout 369 * specifies no blocking 370 */ 371 rv = AE_TIME; 372 mutex_exit(&sp->mutex); 373 return (rv); 374 } 375 376 /* 377 * Not enough units available and timeout specifies waiting 378 */ 379 if (wait_time != ACPI_WAIT_FOREVER) 380 deadline = ddi_get_lbolt() + 381 (clock_t)drv_usectohz(wait_time * 1000); 382 383 do { 384 if (wait_time == ACPI_WAIT_FOREVER) 385 cv_wait(&sp->cv, &sp->mutex); 386 else if (cv_timedwait(&sp->cv, &sp->mutex, deadline) < 0) { 387 rv = AE_TIME; 388 break; 389 } 390 } while (sp->available < count); 391 392 /* if we dropped out of the wait with AE_OK, we got the units */ 393 if (rv == AE_OK) 394 sp->available -= count; 395 396 mutex_exit(&sp->mutex); 397 return (rv); 398 } 399 400 /* 401 * 402 */ 403 void 404 acpi_sema_v(acpi_sema_t *sp, unsigned count) 405 { 406 mutex_enter(&sp->mutex); 407 sp->available += count; 408 cv_broadcast(&sp->cv); 409 mutex_exit(&sp->mutex); 410 } 411 412 413 ACPI_STATUS 414 AcpiOsCreateSemaphore(UINT32 MaxUnits, UINT32 InitialUnits, 415 ACPI_HANDLE *OutHandle) 416 { 417 acpi_sema_t *sp; 418 419 if ((OutHandle == NULL) || (InitialUnits > MaxUnits)) 420 return (AE_BAD_PARAMETER); 421 422 sp = (acpi_sema_t *)kmem_alloc(sizeof (acpi_sema_t), KM_SLEEP); 423 acpi_sema_init(sp, MaxUnits, InitialUnits); 424 *OutHandle = (ACPI_HANDLE)sp; 425 return (AE_OK); 426 } 427 428 429 ACPI_STATUS 430 AcpiOsDeleteSemaphore(ACPI_HANDLE Handle) 431 { 432 433 if (Handle == NULL) 434 return (AE_BAD_PARAMETER); 435 436 acpi_sema_destroy((acpi_sema_t *)Handle); 437 kmem_free((void *)Handle, sizeof (acpi_sema_t)); 438 return (AE_OK); 439 } 440 441 ACPI_STATUS 442 AcpiOsWaitSemaphore(ACPI_HANDLE Handle, UINT32 Units, UINT16 Timeout) 443 { 444 445 if ((Handle == NULL) || (Units < 1)) 446 return (AE_BAD_PARAMETER); 447 448 return (acpi_sema_p((acpi_sema_t *)Handle, Units, Timeout)); 449 } 450 451 ACPI_STATUS 452 AcpiOsSignalSemaphore(ACPI_HANDLE Handle, UINT32 Units) 453 { 454 455 if ((Handle == NULL) || (Units < 1)) 456 return (AE_BAD_PARAMETER); 457 458 acpi_sema_v((acpi_sema_t *)Handle, Units); 459 return (AE_OK); 460 } 461 462 ACPI_STATUS 463 AcpiOsCreateLock(ACPI_HANDLE *OutHandle) 464 { 465 kmutex_t *mp; 466 467 if (OutHandle == NULL) 468 return (AE_BAD_PARAMETER); 469 470 mp = (kmutex_t *)kmem_alloc(sizeof (kmutex_t), KM_SLEEP); 471 mutex_init(mp, NULL, MUTEX_DRIVER, NULL); 472 *OutHandle = (ACPI_HANDLE)mp; 473 return (AE_OK); 474 } 475 476 void 477 AcpiOsDeleteLock(ACPI_HANDLE Handle) 478 { 479 480 if (Handle == NULL) 481 return; 482 483 mutex_destroy((kmutex_t *)Handle); 484 kmem_free((void *)Handle, sizeof (kmutex_t)); 485 } 486 487 ACPI_CPU_FLAGS 488 AcpiOsAcquireLock(ACPI_HANDLE Handle) 489 { 490 491 492 if (Handle == NULL) 493 return (AE_BAD_PARAMETER); 494 495 if (curthread == CPU->cpu_idle_thread) { 496 while (!mutex_tryenter((kmutex_t *)Handle)) 497 /* spin */; 498 } else 499 mutex_enter((kmutex_t *)Handle); 500 return (AE_OK); 501 } 502 503 void 504 AcpiOsReleaseLock(ACPI_HANDLE Handle, ACPI_CPU_FLAGS Flags) 505 { 506 _NOTE(ARGUNUSED(Flags)) 507 508 mutex_exit((kmutex_t *)Handle); 509 } 510 511 512 void * 513 AcpiOsAllocate(ACPI_SIZE Size) 514 { 515 ACPI_SIZE *tmp_ptr; 516 517 Size += sizeof (Size); 518 tmp_ptr = (ACPI_SIZE *)kmem_zalloc(Size, KM_SLEEP); 519 *tmp_ptr++ = Size; 520 return (tmp_ptr); 521 } 522 523 void 524 AcpiOsFree(void *Memory) 525 { 526 ACPI_SIZE size, *tmp_ptr; 527 528 tmp_ptr = (ACPI_SIZE *)Memory; 529 tmp_ptr -= 1; 530 size = *tmp_ptr; 531 kmem_free(tmp_ptr, size); 532 } 533 534 static int napics_found; /* number of ioapic addresses in array */ 535 static ACPI_PHYSICAL_ADDRESS ioapic_paddr[MAX_IO_APIC]; 536 static ACPI_TABLE_MADT *acpi_mapic_dtp = NULL; 537 static void *dummy_ioapicadr; 538 539 void 540 acpica_find_ioapics(void) 541 { 542 int madt_seen, madt_size; 543 ACPI_SUBTABLE_HEADER *ap; 544 ACPI_MADT_IO_APIC *mia; 545 546 if (acpi_mapic_dtp != NULL) 547 return; /* already parsed table */ 548 if (AcpiGetTable(ACPI_SIG_MADT, 1, 549 (ACPI_TABLE_HEADER **) &acpi_mapic_dtp) != AE_OK) 550 return; 551 552 napics_found = 0; 553 554 /* 555 * Search the MADT for ioapics 556 */ 557 ap = (ACPI_SUBTABLE_HEADER *) (acpi_mapic_dtp + 1); 558 madt_size = acpi_mapic_dtp->Header.Length; 559 madt_seen = sizeof (*acpi_mapic_dtp); 560 561 while (madt_seen < madt_size) { 562 563 switch (ap->Type) { 564 case ACPI_MADT_TYPE_IO_APIC: 565 mia = (ACPI_MADT_IO_APIC *) ap; 566 if (napics_found < MAX_IO_APIC) { 567 ioapic_paddr[napics_found++] = 568 (ACPI_PHYSICAL_ADDRESS) 569 (mia->Address & PAGEMASK); 570 } 571 break; 572 573 default: 574 break; 575 } 576 577 /* advance to next entry */ 578 madt_seen += ap->Length; 579 ap = (ACPI_SUBTABLE_HEADER *)(((char *)ap) + ap->Length); 580 } 581 if (dummy_ioapicadr == NULL) 582 dummy_ioapicadr = kmem_zalloc(PAGESIZE, KM_SLEEP); 583 } 584 585 586 void * 587 AcpiOsMapMemory(ACPI_PHYSICAL_ADDRESS PhysicalAddress, ACPI_SIZE Size) 588 { 589 int i; 590 591 /* 592 * If the iopaic address table is populated, check if trying 593 * to access an ioapic. Instead, return a pointer to a dummy ioapic. 594 */ 595 for (i = 0; i < napics_found; i++) { 596 if ((PhysicalAddress & PAGEMASK) == ioapic_paddr[i]) 597 return (dummy_ioapicadr); 598 } 599 /* FUTUREWORK: test PhysicalAddress for > 32 bits */ 600 return (psm_map_new((paddr_t)PhysicalAddress, 601 (size_t)Size, PSM_PROT_WRITE | PSM_PROT_READ)); 602 } 603 604 void 605 AcpiOsUnmapMemory(void *LogicalAddress, ACPI_SIZE Size) 606 { 607 /* 608 * Check if trying to unmap dummy ioapic address. 609 */ 610 if (LogicalAddress == dummy_ioapicadr) 611 return; 612 613 psm_unmap((caddr_t)LogicalAddress, (size_t)Size); 614 } 615 616 /*ARGSUSED*/ 617 ACPI_STATUS 618 AcpiOsGetPhysicalAddress(void *LogicalAddress, 619 ACPI_PHYSICAL_ADDRESS *PhysicalAddress) 620 { 621 622 /* UNIMPLEMENTED: not invoked by ACPI CA code */ 623 return (AE_NOT_IMPLEMENTED); 624 } 625 626 627 ACPI_OSD_HANDLER acpi_isr; 628 void *acpi_isr_context; 629 630 uint_t 631 acpi_wrapper_isr(char *arg) 632 { 633 _NOTE(ARGUNUSED(arg)) 634 635 int status; 636 637 status = (*acpi_isr)(acpi_isr_context); 638 639 if (status == ACPI_INTERRUPT_HANDLED) { 640 return (DDI_INTR_CLAIMED); 641 } else { 642 return (DDI_INTR_UNCLAIMED); 643 } 644 } 645 646 static int acpi_intr_hooked = 0; 647 648 ACPI_STATUS 649 AcpiOsInstallInterruptHandler(UINT32 InterruptNumber, 650 ACPI_OSD_HANDLER ServiceRoutine, 651 void *Context) 652 { 653 _NOTE(ARGUNUSED(InterruptNumber)) 654 655 int retval; 656 int sci_vect; 657 iflag_t sci_flags; 658 659 acpi_isr = ServiceRoutine; 660 acpi_isr_context = Context; 661 662 /* 663 * Get SCI (adjusted for PIC/APIC mode if necessary) 664 */ 665 if (acpica_get_sci(&sci_vect, &sci_flags) != AE_OK) { 666 return (AE_ERROR); 667 } 668 669 #ifdef DEBUG 670 cmn_err(CE_NOTE, "!acpica: attaching SCI %d", sci_vect); 671 #endif 672 673 retval = add_avintr(NULL, SCI_IPL, (avfunc)acpi_wrapper_isr, 674 "ACPI SCI", sci_vect, NULL, NULL, NULL, NULL); 675 if (retval) { 676 acpi_intr_hooked = 1; 677 return (AE_OK); 678 } else 679 return (AE_BAD_PARAMETER); 680 } 681 682 ACPI_STATUS 683 AcpiOsRemoveInterruptHandler(UINT32 InterruptNumber, 684 ACPI_OSD_HANDLER ServiceRoutine) 685 { 686 _NOTE(ARGUNUSED(ServiceRoutine)) 687 688 #ifdef DEBUG 689 cmn_err(CE_NOTE, "!acpica: detaching SCI %d", InterruptNumber); 690 #endif 691 if (acpi_intr_hooked) { 692 rem_avintr(NULL, LOCK_LEVEL - 1, (avfunc)acpi_wrapper_isr, 693 InterruptNumber); 694 acpi_intr_hooked = 0; 695 } 696 return (AE_OK); 697 } 698 699 700 ACPI_THREAD_ID 701 AcpiOsGetThreadId(void) 702 { 703 /* 704 * ACPI CA regards thread ID as an error, but it's valid 705 * on Solaris during kernel initialization. Thus, 1 is added 706 * to the kernel thread ID to avoid returning 0 707 */ 708 return (ddi_get_kt_did() + 1); 709 } 710 711 /* 712 * 713 */ 714 ACPI_STATUS 715 AcpiOsExecute(ACPI_EXECUTE_TYPE Type, ACPI_OSD_EXEC_CALLBACK Function, 716 void *Context) 717 { 718 719 if (!acpica_eventq_init) { 720 /* 721 * Create taskqs for event handling 722 */ 723 if (init_event_queues() != AE_OK) 724 return (AE_ERROR); 725 } 726 727 if (ddi_taskq_dispatch(osl_eventq[Type], Function, Context, 728 DDI_NOSLEEP) == DDI_FAILURE) { 729 #ifdef DEBUG 730 cmn_err(CE_WARN, "!acpica: unable to dispatch event"); 731 #endif 732 return (AE_ERROR); 733 } 734 return (AE_OK); 735 736 } 737 738 void 739 AcpiOsSleep(ACPI_INTEGER Milliseconds) 740 { 741 /* 742 * During kernel startup, before the first tick interrupt 743 * has taken place, we can't call delay; very late in 744 * kernel shutdown or suspend/resume, clock interrupts 745 * are blocked, so delay doesn't work then either. 746 * So we busy wait if lbolt == 0 (kernel startup) 747 * or if acpica_use_safe_delay has been set to a 748 * non-zero value. 749 */ 750 if ((ddi_get_lbolt() == 0) || acpica_use_safe_delay) 751 drv_usecwait(Milliseconds * 1000); 752 else 753 delay(drv_usectohz(Milliseconds * 1000)); 754 } 755 756 void 757 AcpiOsStall(UINT32 Microseconds) 758 { 759 drv_usecwait(Microseconds); 760 } 761 762 763 /* 764 * Implementation of "Windows 2001" compatible I/O permission map 765 * 766 */ 767 #define OSL_IO_NONE (0) 768 #define OSL_IO_READ (1<<0) 769 #define OSL_IO_WRITE (1<<1) 770 #define OSL_IO_RW (OSL_IO_READ | OSL_IO_WRITE) 771 #define OSL_IO_TERM (1<<2) 772 #define OSL_IO_DEFAULT OSL_IO_RW 773 774 static struct io_perm { 775 ACPI_IO_ADDRESS low; 776 ACPI_IO_ADDRESS high; 777 uint8_t perm; 778 } osl_io_perm[] = { 779 { 0xcf8, 0xd00, OSL_IO_NONE | OSL_IO_TERM } 780 }; 781 782 783 /* 784 * 785 */ 786 static struct io_perm * 787 osl_io_find_perm(ACPI_IO_ADDRESS addr) 788 { 789 struct io_perm *p; 790 791 p = osl_io_perm; 792 while (p != NULL) { 793 if ((p->low <= addr) && (addr <= p->high)) 794 break; 795 p = (p->perm & OSL_IO_TERM) ? NULL : p+1; 796 } 797 798 return (p); 799 } 800 801 /* 802 * 803 */ 804 ACPI_STATUS 805 AcpiOsReadPort(ACPI_IO_ADDRESS Address, UINT32 *Value, UINT32 Width) 806 { 807 struct io_perm *p; 808 809 /* verify permission */ 810 p = osl_io_find_perm(Address); 811 if (p && (p->perm & OSL_IO_READ) == 0) { 812 cmn_err(CE_WARN, "!AcpiOsReadPort: %lx %u not permitted", 813 (long)Address, Width); 814 *Value = 0xffffffff; 815 return (AE_ERROR); 816 } 817 818 switch (Width) { 819 case 8: 820 *Value = inb(Address); 821 break; 822 case 16: 823 *Value = inw(Address); 824 break; 825 case 32: 826 *Value = inl(Address); 827 break; 828 default: 829 cmn_err(CE_WARN, "!AcpiOsReadPort: %lx %u failed", 830 (long)Address, Width); 831 return (AE_BAD_PARAMETER); 832 } 833 return (AE_OK); 834 } 835 836 ACPI_STATUS 837 AcpiOsWritePort(ACPI_IO_ADDRESS Address, UINT32 Value, UINT32 Width) 838 { 839 struct io_perm *p; 840 841 /* verify permission */ 842 p = osl_io_find_perm(Address); 843 if (p && (p->perm & OSL_IO_WRITE) == 0) { 844 cmn_err(CE_WARN, "!AcpiOsWritePort: %lx %u not permitted", 845 (long)Address, Width); 846 return (AE_ERROR); 847 } 848 849 switch (Width) { 850 case 8: 851 outb(Address, Value); 852 break; 853 case 16: 854 outw(Address, Value); 855 break; 856 case 32: 857 outl(Address, Value); 858 break; 859 default: 860 cmn_err(CE_WARN, "!AcpiOsWritePort: %lx %u failed", 861 (long)Address, Width); 862 return (AE_BAD_PARAMETER); 863 } 864 return (AE_OK); 865 } 866 867 868 /* 869 * 870 */ 871 872 #define OSL_RW(ptr, val, type, rw) \ 873 { if (rw) *((type *)(ptr)) = *((type *) val); \ 874 else *((type *) val) = *((type *)(ptr)); } 875 876 877 static void 878 osl_rw_memory(ACPI_PHYSICAL_ADDRESS Address, UINT32 *Value, 879 UINT32 Width, int write) 880 { 881 size_t maplen = Width / 8; 882 caddr_t ptr; 883 884 ptr = psm_map_new((paddr_t)Address, maplen, 885 PSM_PROT_WRITE | PSM_PROT_READ); 886 887 switch (maplen) { 888 case 1: 889 OSL_RW(ptr, Value, uint8_t, write); 890 break; 891 case 2: 892 OSL_RW(ptr, Value, uint16_t, write); 893 break; 894 case 4: 895 OSL_RW(ptr, Value, uint32_t, write); 896 break; 897 default: 898 cmn_err(CE_WARN, "!osl_rw_memory: invalid size %d", 899 Width); 900 break; 901 } 902 903 psm_unmap(ptr, maplen); 904 } 905 906 ACPI_STATUS 907 AcpiOsReadMemory(ACPI_PHYSICAL_ADDRESS Address, 908 UINT32 *Value, UINT32 Width) 909 { 910 osl_rw_memory(Address, Value, Width, 0); 911 return (AE_OK); 912 } 913 914 ACPI_STATUS 915 AcpiOsWriteMemory(ACPI_PHYSICAL_ADDRESS Address, 916 UINT32 Value, UINT32 Width) 917 { 918 osl_rw_memory(Address, &Value, Width, 1); 919 return (AE_OK); 920 } 921 922 923 ACPI_STATUS 924 AcpiOsReadPciConfiguration(ACPI_PCI_ID *PciId, UINT32 Register, 925 void *Value, UINT32 Width) 926 { 927 928 switch (Width) { 929 case 8: 930 *((UINT64 *)Value) = (UINT64)(*pci_getb_func) 931 (PciId->Bus, PciId->Device, PciId->Function, Register); 932 break; 933 case 16: 934 *((UINT64 *)Value) = (UINT64)(*pci_getw_func) 935 (PciId->Bus, PciId->Device, PciId->Function, Register); 936 break; 937 case 32: 938 *((UINT64 *)Value) = (UINT64)(*pci_getl_func) 939 (PciId->Bus, PciId->Device, PciId->Function, Register); 940 break; 941 case 64: 942 default: 943 cmn_err(CE_WARN, "!AcpiOsReadPciConfiguration: %x %u failed", 944 Register, Width); 945 return (AE_BAD_PARAMETER); 946 } 947 return (AE_OK); 948 } 949 950 /* 951 * 952 */ 953 int acpica_write_pci_config_ok = 1; 954 955 ACPI_STATUS 956 AcpiOsWritePciConfiguration(ACPI_PCI_ID *PciId, UINT32 Register, 957 ACPI_INTEGER Value, UINT32 Width) 958 { 959 960 if (!acpica_write_pci_config_ok) { 961 cmn_err(CE_NOTE, "!write to PCI cfg %x/%x/%x %x" 962 " %lx %d not permitted", PciId->Bus, PciId->Device, 963 PciId->Function, Register, (long)Value, Width); 964 return (AE_OK); 965 } 966 967 switch (Width) { 968 case 8: 969 (*pci_putb_func)(PciId->Bus, PciId->Device, PciId->Function, 970 Register, (uint8_t)Value); 971 break; 972 case 16: 973 (*pci_putw_func)(PciId->Bus, PciId->Device, PciId->Function, 974 Register, (uint16_t)Value); 975 break; 976 case 32: 977 (*pci_putl_func)(PciId->Bus, PciId->Device, PciId->Function, 978 Register, (uint32_t)Value); 979 break; 980 case 64: 981 default: 982 cmn_err(CE_WARN, "!AcpiOsWritePciConfiguration: %x %u failed", 983 Register, Width); 984 return (AE_BAD_PARAMETER); 985 } 986 return (AE_OK); 987 } 988 989 /* 990 * Called with ACPI_HANDLEs for both a PCI Config Space 991 * OpRegion and (what ACPI CA thinks is) the PCI device 992 * to which this ConfigSpace OpRegion belongs. Since 993 * ACPI CA depends on a valid _BBN object being present 994 * and this is not always true (one old x86 had broken _BBN), 995 * we go ahead and get the correct PCI bus number using the 996 * devinfo mapping (which compensates for broken _BBN). 997 * 998 * Default values for bus, segment, device and function are 999 * all 0 when ACPI CA can't figure them out. 1000 * 1001 * Some BIOSes implement _BBN() by reading PCI config space 1002 * on bus #0 - which means that we'll recurse when we attempt 1003 * to create the devinfo-to-ACPI map. If Derive is called during 1004 * scan_d2a_map, we don't translate the bus # and return. 1005 * 1006 * We get the parent of the OpRegion, which must be a PCI 1007 * node, fetch the associated devinfo node and snag the 1008 * b/d/f from it. 1009 */ 1010 void 1011 AcpiOsDerivePciId(ACPI_HANDLE rhandle, ACPI_HANDLE chandle, 1012 ACPI_PCI_ID **PciId) 1013 { 1014 ACPI_HANDLE handle; 1015 dev_info_t *dip; 1016 int bus, device, func, devfn; 1017 1018 1019 /* 1020 * See above - avoid recursing during scanning_d2a_map. 1021 */ 1022 if (scanning_d2a_map) 1023 return; 1024 1025 /* 1026 * Get the OpRegion's parent 1027 */ 1028 if (AcpiGetParent(chandle, &handle) != AE_OK) 1029 return; 1030 1031 /* 1032 * If we've mapped the ACPI node to the devinfo 1033 * tree, use the devinfo reg property 1034 */ 1035 if (acpica_get_devinfo(handle, &dip) == AE_OK) { 1036 (void) acpica_get_bdf(dip, &bus, &device, &func); 1037 (*PciId)->Bus = bus; 1038 (*PciId)->Device = device; 1039 (*PciId)->Function = func; 1040 } else if (acpica_eval_int(handle, "_ADR", &devfn) == AE_OK) { 1041 /* no devinfo node - just confirm the d/f */ 1042 (*PciId)->Device = (devfn >> 16) & 0xFFFF; 1043 (*PciId)->Function = devfn & 0xFFFF; 1044 } 1045 } 1046 1047 1048 /*ARGSUSED*/ 1049 BOOLEAN 1050 AcpiOsReadable(void *Pointer, ACPI_SIZE Length) 1051 { 1052 1053 /* Always says yes; all mapped memory assumed readable */ 1054 return (1); 1055 } 1056 1057 /*ARGSUSED*/ 1058 BOOLEAN 1059 AcpiOsWritable(void *Pointer, ACPI_SIZE Length) 1060 { 1061 1062 /* Always says yes; all mapped memory assumed writable */ 1063 return (1); 1064 } 1065 1066 UINT64 1067 AcpiOsGetTimer(void) 1068 { 1069 /* gethrtime() returns 1nS resolution; convert to 100nS granules */ 1070 return ((gethrtime() + 50) / 100); 1071 } 1072 1073 static struct AcpiOSIFeature_s { 1074 uint64_t control_flag; 1075 const char *feature_name; 1076 } AcpiOSIFeatures[] = { 1077 { ACPI_FEATURE_OSI_MODULE, "Module Device" }, 1078 { 0, "Processor Device" } 1079 }; 1080 1081 /*ARGSUSED*/ 1082 ACPI_STATUS 1083 AcpiOsValidateInterface(char *feature) 1084 { 1085 int i; 1086 1087 ASSERT(feature != NULL); 1088 for (i = 0; i < sizeof (AcpiOSIFeatures) / sizeof (AcpiOSIFeatures[0]); 1089 i++) { 1090 if (strcmp(feature, AcpiOSIFeatures[i].feature_name) != 0) { 1091 continue; 1092 } 1093 /* Check whether required core features are available. */ 1094 if (AcpiOSIFeatures[i].control_flag != 0 && 1095 acpica_get_core_feature(AcpiOSIFeatures[i].control_flag) != 1096 AcpiOSIFeatures[i].control_flag) { 1097 break; 1098 } 1099 /* Feature supported. */ 1100 return (AE_OK); 1101 } 1102 1103 return (AE_SUPPORT); 1104 } 1105 1106 /*ARGSUSED*/ 1107 ACPI_STATUS 1108 AcpiOsValidateAddress(UINT8 spaceid, ACPI_PHYSICAL_ADDRESS addr, 1109 ACPI_SIZE length) 1110 { 1111 return (AE_OK); 1112 } 1113 1114 ACPI_STATUS 1115 AcpiOsSignal(UINT32 Function, void *Info) 1116 { 1117 _NOTE(ARGUNUSED(Function, Info)) 1118 1119 /* FUTUREWORK: debugger support */ 1120 1121 cmn_err(CE_NOTE, "!OsSignal unimplemented"); 1122 return (AE_OK); 1123 } 1124 1125 void ACPI_INTERNAL_VAR_XFACE 1126 AcpiOsPrintf(const char *Format, ...) 1127 { 1128 va_list ap; 1129 1130 va_start(ap, Format); 1131 AcpiOsVprintf(Format, ap); 1132 va_end(ap); 1133 } 1134 1135 /* 1136 * When != 0, sends output to console 1137 * Patchable with kmdb or /etc/system. 1138 */ 1139 int acpica_console_out = 0; 1140 1141 #define ACPICA_OUTBUF_LEN 160 1142 char acpica_outbuf[ACPICA_OUTBUF_LEN]; 1143 int acpica_outbuf_offset; 1144 1145 /* 1146 * 1147 */ 1148 static void 1149 acpica_pr_buf(char *buf) 1150 { 1151 char c, *bufp, *outp; 1152 int out_remaining; 1153 1154 /* 1155 * copy the supplied buffer into the output buffer 1156 * when we hit a '\n' or overflow the output buffer, 1157 * output and reset the output buffer 1158 */ 1159 bufp = buf; 1160 outp = acpica_outbuf + acpica_outbuf_offset; 1161 out_remaining = ACPICA_OUTBUF_LEN - acpica_outbuf_offset - 1; 1162 while (c = *bufp++) { 1163 *outp++ = c; 1164 if (c == '\n' || --out_remaining == 0) { 1165 *outp = '\0'; 1166 if (acpica_console_out) 1167 printf(acpica_outbuf); 1168 else 1169 (void) strlog(0, 0, 0, 1170 SL_CONSOLE | SL_NOTE | SL_LOGONLY, 1171 acpica_outbuf); 1172 acpica_outbuf_offset = 0; 1173 outp = acpica_outbuf; 1174 out_remaining = ACPICA_OUTBUF_LEN - 1; 1175 } 1176 } 1177 1178 acpica_outbuf_offset = outp - acpica_outbuf; 1179 } 1180 1181 void 1182 AcpiOsVprintf(const char *Format, va_list Args) 1183 { 1184 1185 /* 1186 * If AcpiOsInitialize() failed to allocate a string buffer, 1187 * resort to vprintf(). 1188 */ 1189 if (acpi_osl_pr_buffer == NULL) { 1190 vprintf(Format, Args); 1191 return; 1192 } 1193 1194 /* 1195 * It is possible that a very long debug output statement will 1196 * be truncated; this is silently ignored. 1197 */ 1198 (void) vsnprintf(acpi_osl_pr_buffer, acpi_osl_pr_buflen, Format, Args); 1199 acpica_pr_buf(acpi_osl_pr_buffer); 1200 } 1201 1202 void 1203 AcpiOsRedirectOutput(void *Destination) 1204 { 1205 _NOTE(ARGUNUSED(Destination)) 1206 1207 /* FUTUREWORK: debugger support */ 1208 1209 #ifdef DEBUG 1210 cmn_err(CE_WARN, "!acpica: AcpiOsRedirectOutput called"); 1211 #endif 1212 } 1213 1214 1215 UINT32 1216 AcpiOsGetLine(char *Buffer) 1217 { 1218 _NOTE(ARGUNUSED(Buffer)) 1219 1220 /* FUTUREWORK: debugger support */ 1221 1222 return (0); 1223 } 1224 1225 /* 1226 * Device tree binding 1227 */ 1228 static ACPI_STATUS 1229 acpica_find_pcibus_walker(ACPI_HANDLE hdl, UINT32 lvl, void *ctxp, void **rvpp) 1230 { 1231 _NOTE(ARGUNUSED(lvl)); 1232 1233 int sta, hid, bbn; 1234 int busno = (intptr_t)ctxp; 1235 ACPI_HANDLE *hdlp = (ACPI_HANDLE *)rvpp; 1236 1237 /* Check whether device exists. */ 1238 if (ACPI_SUCCESS(acpica_eval_int(hdl, "_STA", &sta)) && 1239 !(sta & (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_FUNCTIONING))) { 1240 /* 1241 * Skip object if device doesn't exist. 1242 * According to ACPI Spec, 1243 * 1) setting either bit 0 or bit 3 means that device exists. 1244 * 2) Absence of _STA method means all status bits set. 1245 */ 1246 return (AE_CTRL_DEPTH); 1247 } 1248 1249 if (ACPI_FAILURE(acpica_eval_hid(hdl, "_HID", &hid)) || 1250 (hid != HID_PCI_BUS && hid != HID_PCI_EXPRESS_BUS)) { 1251 /* Non PCI/PCIe host bridge. */ 1252 return (AE_OK); 1253 } 1254 1255 if (acpi_has_broken_bbn) { 1256 ACPI_BUFFER rb; 1257 rb.Pointer = NULL; 1258 rb.Length = ACPI_ALLOCATE_BUFFER; 1259 1260 /* Decree _BBN == n from PCI<n> */ 1261 if (AcpiGetName(hdl, ACPI_SINGLE_NAME, &rb) != AE_OK) { 1262 return (AE_CTRL_TERMINATE); 1263 } 1264 bbn = ((char *)rb.Pointer)[3] - '0'; 1265 AcpiOsFree(rb.Pointer); 1266 if (bbn == busno || busno == 0) { 1267 *hdlp = hdl; 1268 return (AE_CTRL_TERMINATE); 1269 } 1270 } else if (ACPI_SUCCESS(acpica_eval_int(hdl, "_BBN", &bbn))) { 1271 if (bbn == busno) { 1272 *hdlp = hdl; 1273 return (AE_CTRL_TERMINATE); 1274 } 1275 } else if (busno == 0) { 1276 *hdlp = hdl; 1277 return (AE_CTRL_TERMINATE); 1278 } 1279 1280 return (AE_CTRL_DEPTH); 1281 } 1282 1283 static int 1284 acpica_find_pcibus(int busno, ACPI_HANDLE *rh) 1285 { 1286 ACPI_HANDLE sbobj, busobj; 1287 1288 /* initialize static flag by querying ACPI namespace for bug */ 1289 if (acpi_has_broken_bbn == -1) 1290 acpi_has_broken_bbn = acpica_query_bbn_problem(); 1291 1292 if (ACPI_SUCCESS(AcpiGetHandle(NULL, "\\_SB", &sbobj))) { 1293 busobj = NULL; 1294 (void) AcpiWalkNamespace(ACPI_TYPE_DEVICE, sbobj, UINT32_MAX, 1295 acpica_find_pcibus_walker, (void *)(intptr_t)busno, 1296 (void **)&busobj); 1297 if (busobj != NULL) { 1298 *rh = busobj; 1299 return (AE_OK); 1300 } 1301 } 1302 1303 return (AE_ERROR); 1304 } 1305 1306 static ACPI_STATUS 1307 acpica_query_bbn_walker(ACPI_HANDLE hdl, UINT32 lvl, void *ctxp, void **rvpp) 1308 { 1309 _NOTE(ARGUNUSED(lvl)); 1310 _NOTE(ARGUNUSED(rvpp)); 1311 1312 int sta, hid, bbn; 1313 int *cntp = (int *)ctxp; 1314 1315 /* Check whether device exists. */ 1316 if (ACPI_SUCCESS(acpica_eval_int(hdl, "_STA", &sta)) && 1317 !(sta & (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_FUNCTIONING))) { 1318 /* 1319 * Skip object if device doesn't exist. 1320 * According to ACPI Spec, 1321 * 1) setting either bit 0 or bit 3 means that device exists. 1322 * 2) Absence of _STA method means all status bits set. 1323 */ 1324 return (AE_CTRL_DEPTH); 1325 } 1326 1327 if (ACPI_FAILURE(acpica_eval_hid(hdl, "_HID", &hid)) || 1328 (hid != HID_PCI_BUS && hid != HID_PCI_EXPRESS_BUS)) { 1329 /* Non PCI/PCIe host bridge. */ 1330 return (AE_OK); 1331 } else if (ACPI_SUCCESS(acpica_eval_int(hdl, "_BBN", &bbn)) && 1332 bbn == 0 && ++(*cntp) > 1) { 1333 /* 1334 * If we find more than one bus with a 0 _BBN 1335 * we have the problem that BigBear's BIOS shows 1336 */ 1337 return (AE_CTRL_TERMINATE); 1338 } else { 1339 /* 1340 * Skip children of PCI/PCIe host bridge. 1341 */ 1342 return (AE_CTRL_DEPTH); 1343 } 1344 } 1345 1346 /* 1347 * Look for ACPI problem where _BBN is zero for multiple PCI buses 1348 * This is a clear ACPI bug, but we have a workaround in acpica_find_pcibus() 1349 * below if it exists. 1350 */ 1351 static int 1352 acpica_query_bbn_problem(void) 1353 { 1354 ACPI_HANDLE sbobj; 1355 int zerobbncnt; 1356 void *rv; 1357 1358 zerobbncnt = 0; 1359 if (ACPI_SUCCESS(AcpiGetHandle(NULL, "\\_SB", &sbobj))) { 1360 (void) AcpiWalkNamespace(ACPI_TYPE_DEVICE, sbobj, UINT32_MAX, 1361 acpica_query_bbn_walker, &zerobbncnt, &rv); 1362 } 1363 1364 return (zerobbncnt > 1 ? 1 : 0); 1365 } 1366 1367 static const char hextab[] = "0123456789ABCDEF"; 1368 1369 static int 1370 hexdig(int c) 1371 { 1372 /* 1373 * Get hex digit: 1374 * 1375 * Returns the 4-bit hex digit named by the input character. Returns 1376 * zero if the input character is not valid hex! 1377 */ 1378 1379 int x = ((c < 'a') || (c > 'z')) ? c : (c - ' '); 1380 int j = sizeof (hextab); 1381 1382 while (--j && (x != hextab[j])) { 1383 } 1384 return (j); 1385 } 1386 1387 static int 1388 CompressEisaID(char *np) 1389 { 1390 /* 1391 * Compress an EISA device name: 1392 * 1393 * This routine converts a 7-byte ASCII device name into the 4-byte 1394 * compressed form used by EISA (50 bytes of ROM to save 1 byte of 1395 * NV-RAM!) 1396 */ 1397 1398 union { char octets[4]; int retval; } myu; 1399 1400 myu.octets[0] = ((np[0] & 0x1F) << 2) + ((np[1] >> 3) & 0x03); 1401 myu.octets[1] = ((np[1] & 0x07) << 5) + (np[2] & 0x1F); 1402 myu.octets[2] = (hexdig(np[3]) << 4) + hexdig(np[4]); 1403 myu.octets[3] = (hexdig(np[5]) << 4) + hexdig(np[6]); 1404 1405 return (myu.retval); 1406 } 1407 1408 ACPI_STATUS 1409 acpica_eval_int(ACPI_HANDLE dev, char *method, int *rint) 1410 { 1411 ACPI_STATUS status; 1412 ACPI_BUFFER rb; 1413 ACPI_OBJECT ro; 1414 1415 rb.Pointer = &ro; 1416 rb.Length = sizeof (ro); 1417 if ((status = AcpiEvaluateObjectTyped(dev, method, NULL, &rb, 1418 ACPI_TYPE_INTEGER)) == AE_OK) 1419 *rint = ro.Integer.Value; 1420 1421 return (status); 1422 } 1423 1424 static int 1425 acpica_eval_hid(ACPI_HANDLE dev, char *method, int *rint) 1426 { 1427 ACPI_BUFFER rb; 1428 ACPI_OBJECT *rv; 1429 1430 rb.Pointer = NULL; 1431 rb.Length = ACPI_ALLOCATE_BUFFER; 1432 if (AcpiEvaluateObject(dev, method, NULL, &rb) == AE_OK && 1433 rb.Length != 0) { 1434 rv = rb.Pointer; 1435 if (rv->Type == ACPI_TYPE_INTEGER) { 1436 *rint = rv->Integer.Value; 1437 AcpiOsFree(rv); 1438 return (AE_OK); 1439 } else if (rv->Type == ACPI_TYPE_STRING) { 1440 char *stringData; 1441 1442 /* Convert the string into an EISA ID */ 1443 if (rv->String.Pointer == NULL) { 1444 AcpiOsFree(rv); 1445 return (AE_ERROR); 1446 } 1447 1448 stringData = rv->String.Pointer; 1449 1450 /* 1451 * If the string is an EisaID, it must be 7 1452 * characters; if it's an ACPI ID, it will be 8 1453 * (and we don't care about ACPI ids here). 1454 */ 1455 if (strlen(stringData) != 7) { 1456 AcpiOsFree(rv); 1457 return (AE_ERROR); 1458 } 1459 1460 *rint = CompressEisaID(stringData); 1461 AcpiOsFree(rv); 1462 return (AE_OK); 1463 } else 1464 AcpiOsFree(rv); 1465 } 1466 return (AE_ERROR); 1467 } 1468 1469 /* 1470 * Create linkage between devinfo nodes and ACPI nodes 1471 */ 1472 ACPI_STATUS 1473 acpica_tag_devinfo(dev_info_t *dip, ACPI_HANDLE acpiobj) 1474 { 1475 ACPI_STATUS status; 1476 ACPI_BUFFER rb; 1477 1478 /* 1479 * Tag the devinfo node with the ACPI name 1480 */ 1481 rb.Pointer = NULL; 1482 rb.Length = ACPI_ALLOCATE_BUFFER; 1483 status = AcpiGetName(acpiobj, ACPI_FULL_PATHNAME, &rb); 1484 if (ACPI_FAILURE(status)) { 1485 cmn_err(CE_WARN, "acpica: could not get ACPI path!"); 1486 } else { 1487 (void) ndi_prop_update_string(DDI_DEV_T_NONE, dip, 1488 "acpi-namespace", (char *)rb.Pointer); 1489 AcpiOsFree(rb.Pointer); 1490 1491 /* 1492 * Tag the ACPI node with the dip 1493 */ 1494 status = acpica_set_devinfo(acpiobj, dip); 1495 ASSERT(ACPI_SUCCESS(status)); 1496 } 1497 1498 return (status); 1499 } 1500 1501 /* 1502 * Destroy linkage between devinfo nodes and ACPI nodes 1503 */ 1504 ACPI_STATUS 1505 acpica_untag_devinfo(dev_info_t *dip, ACPI_HANDLE acpiobj) 1506 { 1507 (void) acpica_unset_devinfo(acpiobj); 1508 (void) ndi_prop_remove(DDI_DEV_T_NONE, dip, "acpi-namespace"); 1509 1510 return (AE_OK); 1511 } 1512 1513 /* 1514 * Return the ACPI device node matching the CPU dev_info node. 1515 */ 1516 ACPI_STATUS 1517 acpica_get_handle_cpu(int cpu_id, ACPI_HANDLE *rh) 1518 { 1519 int i; 1520 1521 /* 1522 * if cpu_map itself is NULL, we're a uppc system and 1523 * acpica_build_processor_map() hasn't been called yet. 1524 * So call it here 1525 */ 1526 if (cpu_map == NULL) { 1527 (void) acpica_build_processor_map(); 1528 if (cpu_map == NULL) 1529 return (AE_ERROR); 1530 } 1531 1532 if (cpu_id < 0) { 1533 return (AE_ERROR); 1534 } 1535 1536 /* 1537 * search object with cpuid in cpu_map 1538 */ 1539 mutex_enter(&cpu_map_lock); 1540 for (i = 0; i < cpu_map_count; i++) { 1541 if (cpu_map[i]->cpu_id == cpu_id) { 1542 break; 1543 } 1544 } 1545 if (i >= cpu_map_count || (cpu_map[i]->obj == NULL)) { 1546 mutex_exit(&cpu_map_lock); 1547 return (AE_ERROR); 1548 } 1549 *rh = cpu_map[cpu_id]->obj; 1550 mutex_exit(&cpu_map_lock); 1551 1552 return (AE_OK); 1553 } 1554 1555 /* 1556 * Determine if this object is a processor 1557 */ 1558 static ACPI_STATUS 1559 acpica_probe_processor(ACPI_HANDLE obj, UINT32 level, void *ctx, void **rv) 1560 { 1561 ACPI_STATUS status; 1562 ACPI_OBJECT_TYPE objtype; 1563 unsigned long acpi_id; 1564 ACPI_BUFFER rb; 1565 1566 if (AcpiGetType(obj, &objtype) != AE_OK) 1567 return (AE_OK); 1568 1569 if (objtype == ACPI_TYPE_PROCESSOR) { 1570 /* process a Processor */ 1571 rb.Pointer = NULL; 1572 rb.Length = ACPI_ALLOCATE_BUFFER; 1573 status = AcpiEvaluateObjectTyped(obj, NULL, NULL, &rb, 1574 ACPI_TYPE_PROCESSOR); 1575 if (status != AE_OK) { 1576 cmn_err(CE_WARN, "!acpica: error probing Processor"); 1577 return (status); 1578 } 1579 acpi_id = ((ACPI_OBJECT *)rb.Pointer)->Processor.ProcId; 1580 AcpiOsFree(rb.Pointer); 1581 } else if (objtype == ACPI_TYPE_DEVICE) { 1582 /* process a processor Device */ 1583 rb.Pointer = NULL; 1584 rb.Length = ACPI_ALLOCATE_BUFFER; 1585 status = AcpiGetObjectInfo(obj, &rb); 1586 if (status != AE_OK) { 1587 cmn_err(CE_WARN, 1588 "!acpica: error probing Processor Device\n"); 1589 return (status); 1590 } 1591 ASSERT(((ACPI_OBJECT *)rb.Pointer)->Type == 1592 ACPI_TYPE_DEVICE); 1593 1594 if (ddi_strtoul( 1595 ((ACPI_DEVICE_INFO *)rb.Pointer)->UniqueId.Value, 1596 NULL, 10, &acpi_id) != 0) { 1597 AcpiOsFree(rb.Pointer); 1598 cmn_err(CE_WARN, 1599 "!acpica: error probing Processor Device _UID\n"); 1600 return (AE_ERROR); 1601 } 1602 AcpiOsFree(rb.Pointer); 1603 } 1604 (void) acpica_add_processor_to_map(acpi_id, obj, UINT32_MAX); 1605 1606 return (AE_OK); 1607 } 1608 1609 static void 1610 scan_d2a_map(void) 1611 { 1612 dev_info_t *dip, *cdip; 1613 ACPI_HANDLE acpiobj; 1614 char *device_type_prop; 1615 int bus; 1616 static int map_error = 0; 1617 1618 if (map_error) 1619 return; 1620 1621 scanning_d2a_map = 1; 1622 1623 /* 1624 * Find all child-of-root PCI buses, and find their corresponding 1625 * ACPI child-of-root PCI nodes. For each one, add to the 1626 * d2a table. 1627 */ 1628 1629 for (dip = ddi_get_child(ddi_root_node()); 1630 dip != NULL; 1631 dip = ddi_get_next_sibling(dip)) { 1632 1633 /* prune non-PCI nodes */ 1634 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, 1635 DDI_PROP_DONTPASS, 1636 "device_type", &device_type_prop) != DDI_PROP_SUCCESS) 1637 continue; 1638 1639 if ((strcmp("pci", device_type_prop) != 0) && 1640 (strcmp("pciex", device_type_prop) != 0)) { 1641 ddi_prop_free(device_type_prop); 1642 continue; 1643 } 1644 1645 ddi_prop_free(device_type_prop); 1646 1647 /* 1648 * To get bus number of dip, get first child and get its 1649 * bus number. If NULL, just continue, because we don't 1650 * care about bus nodes with no children anyway. 1651 */ 1652 if ((cdip = ddi_get_child(dip)) == NULL) 1653 continue; 1654 1655 if (acpica_get_bdf(cdip, &bus, NULL, NULL) < 0) { 1656 #ifdef D2ADEBUG 1657 cmn_err(CE_WARN, "Can't get bus number of PCI child?"); 1658 #endif 1659 map_error = 1; 1660 scanning_d2a_map = 0; 1661 d2a_done = 1; 1662 return; 1663 } 1664 1665 if (acpica_find_pcibus(bus, &acpiobj) == AE_ERROR) { 1666 #ifdef D2ADEBUG 1667 cmn_err(CE_WARN, "No ACPI bus obj for bus %d?\n", bus); 1668 #endif 1669 map_error = 1; 1670 continue; 1671 } 1672 1673 acpica_tag_devinfo(dip, acpiobj); 1674 1675 /* call recursively to enumerate subtrees */ 1676 scan_d2a_subtree(dip, acpiobj, bus); 1677 } 1678 1679 scanning_d2a_map = 0; 1680 d2a_done = 1; 1681 } 1682 1683 /* 1684 * For all acpi child devices of acpiobj, find their matching 1685 * dip under "dip" argument. (matching means "matches dev/fn"). 1686 * bus is assumed to already be a match from caller, and is 1687 * used here only to record in the d2a entry. Recurse if necessary. 1688 */ 1689 static void 1690 scan_d2a_subtree(dev_info_t *dip, ACPI_HANDLE acpiobj, int bus) 1691 { 1692 int acpi_devfn, hid; 1693 ACPI_HANDLE acld; 1694 dev_info_t *dcld; 1695 int dcld_b, dcld_d, dcld_f; 1696 int dev, func; 1697 char *device_type_prop; 1698 1699 acld = NULL; 1700 while (AcpiGetNextObject(ACPI_TYPE_DEVICE, acpiobj, acld, &acld) 1701 == AE_OK) { 1702 /* get the dev/func we're looking for in the devinfo tree */ 1703 if (acpica_eval_int(acld, "_ADR", &acpi_devfn) != AE_OK) 1704 continue; 1705 dev = (acpi_devfn >> 16) & 0xFFFF; 1706 func = acpi_devfn & 0xFFFF; 1707 1708 /* look through all the immediate children of dip */ 1709 for (dcld = ddi_get_child(dip); dcld != NULL; 1710 dcld = ddi_get_next_sibling(dcld)) { 1711 if (acpica_get_bdf(dcld, &dcld_b, &dcld_d, &dcld_f) < 0) 1712 continue; 1713 1714 /* dev must match; function must match or wildcard */ 1715 if (dcld_d != dev || 1716 (func != 0xFFFF && func != dcld_f)) 1717 continue; 1718 bus = dcld_b; 1719 1720 /* found a match, record it */ 1721 acpica_tag_devinfo(dcld, acld); 1722 1723 /* if we find a bridge, recurse from here */ 1724 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dcld, 1725 DDI_PROP_DONTPASS, "device_type", 1726 &device_type_prop) == DDI_PROP_SUCCESS) { 1727 if ((strcmp("pci", device_type_prop) == 0) || 1728 (strcmp("pciex", device_type_prop) == 0)) 1729 scan_d2a_subtree(dcld, acld, bus); 1730 ddi_prop_free(device_type_prop); 1731 } 1732 1733 /* done finding a match, so break now */ 1734 break; 1735 } 1736 } 1737 } 1738 1739 /* 1740 * Return bus/dev/fn for PCI dip (note: not the parent "pci" node). 1741 */ 1742 int 1743 acpica_get_bdf(dev_info_t *dip, int *bus, int *device, int *func) 1744 { 1745 pci_regspec_t *pci_rp; 1746 int len; 1747 1748 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1749 "reg", (int **)&pci_rp, (uint_t *)&len) != DDI_SUCCESS) 1750 return (-1); 1751 1752 if (len < (sizeof (pci_regspec_t) / sizeof (int))) { 1753 ddi_prop_free(pci_rp); 1754 return (-1); 1755 } 1756 if (bus != NULL) 1757 *bus = (int)PCI_REG_BUS_G(pci_rp->pci_phys_hi); 1758 if (device != NULL) 1759 *device = (int)PCI_REG_DEV_G(pci_rp->pci_phys_hi); 1760 if (func != NULL) 1761 *func = (int)PCI_REG_FUNC_G(pci_rp->pci_phys_hi); 1762 ddi_prop_free(pci_rp); 1763 return (0); 1764 } 1765 1766 /* 1767 * Return the ACPI device node matching this dev_info node, if it 1768 * exists in the ACPI tree. 1769 */ 1770 ACPI_STATUS 1771 acpica_get_handle(dev_info_t *dip, ACPI_HANDLE *rh) 1772 { 1773 ACPI_STATUS status; 1774 char *acpiname; 1775 1776 if (!d2a_done) 1777 scan_d2a_map(); 1778 1779 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 1780 "acpi-namespace", &acpiname) != DDI_PROP_SUCCESS) { 1781 return (AE_ERROR); 1782 } 1783 1784 status = AcpiGetHandle(NULL, acpiname, rh); 1785 ddi_prop_free((void *)acpiname); 1786 return (status); 1787 } 1788 1789 1790 1791 /* 1792 * Manage OS data attachment to ACPI nodes 1793 */ 1794 1795 /* 1796 * Return the (dev_info_t *) associated with the ACPI node. 1797 */ 1798 ACPI_STATUS 1799 acpica_get_devinfo(ACPI_HANDLE obj, dev_info_t **dipp) 1800 { 1801 ACPI_STATUS status; 1802 void *ptr; 1803 1804 status = AcpiGetData(obj, acpica_devinfo_handler, &ptr); 1805 if (status == AE_OK) 1806 *dipp = (dev_info_t *)ptr; 1807 1808 return (status); 1809 } 1810 1811 /* 1812 * Set the dev_info_t associated with the ACPI node. 1813 */ 1814 static ACPI_STATUS 1815 acpica_set_devinfo(ACPI_HANDLE obj, dev_info_t *dip) 1816 { 1817 ACPI_STATUS status; 1818 1819 status = AcpiAttachData(obj, acpica_devinfo_handler, (void *)dip); 1820 return (status); 1821 } 1822 1823 /* 1824 * Unset the dev_info_t associated with the ACPI node. 1825 */ 1826 static ACPI_STATUS 1827 acpica_unset_devinfo(ACPI_HANDLE obj) 1828 { 1829 return (AcpiDetachData(obj, acpica_devinfo_handler)); 1830 } 1831 1832 /* 1833 * 1834 */ 1835 void 1836 acpica_devinfo_handler(ACPI_HANDLE obj, UINT32 func, void *data) 1837 { 1838 /* noop */ 1839 } 1840 1841 ACPI_STATUS 1842 acpica_build_processor_map(void) 1843 { 1844 ACPI_STATUS status; 1845 void *rv; 1846 1847 /* 1848 * shouldn't be called more than once anyway 1849 */ 1850 if (cpu_map_built) 1851 return (AE_OK); 1852 1853 /* 1854 * ACPI device configuration driver has built mapping information 1855 * among processor id and object handle, no need to probe again. 1856 */ 1857 if (acpica_get_devcfg_feature(ACPI_DEVCFG_CPU)) { 1858 cpu_map_built = 1; 1859 return (AE_OK); 1860 } 1861 1862 /* 1863 * Look for Processor objects 1864 */ 1865 status = AcpiWalkNamespace(ACPI_TYPE_PROCESSOR, 1866 ACPI_ROOT_OBJECT, 1867 4, 1868 acpica_probe_processor, 1869 NULL, 1870 &rv); 1871 ASSERT(status == AE_OK); 1872 1873 /* 1874 * Look for processor Device objects 1875 */ 1876 status = AcpiGetDevices("ACPI0007", 1877 acpica_probe_processor, 1878 NULL, 1879 &rv); 1880 ASSERT(status == AE_OK); 1881 cpu_map_built = 1; 1882 1883 return (status); 1884 } 1885 1886 /* 1887 * Grow cpu map table on demand. 1888 */ 1889 static void 1890 acpica_grow_cpu_map(void) 1891 { 1892 if (cpu_map_count == cpu_map_count_max) { 1893 size_t sz; 1894 struct cpu_map_item **new_map; 1895 1896 ASSERT(cpu_map_count_max < INT_MAX / 2); 1897 cpu_map_count_max += max_ncpus; 1898 new_map = kmem_zalloc(sizeof (cpu_map[0]) * cpu_map_count_max, 1899 KM_SLEEP); 1900 if (cpu_map_count != 0) { 1901 ASSERT(cpu_map != NULL); 1902 sz = sizeof (cpu_map[0]) * cpu_map_count; 1903 kcopy(cpu_map, new_map, sz); 1904 kmem_free(cpu_map, sz); 1905 } 1906 cpu_map = new_map; 1907 } 1908 } 1909 1910 /* 1911 * Maintain mapping information among (cpu id, ACPI processor id, APIC id, 1912 * ACPI handle). The mapping table will be setup in two steps: 1913 * 1) acpica_add_processor_to_map() builds mapping among APIC id, ACPI 1914 * processor id and ACPI object handle. 1915 * 2) acpica_map_cpu() builds mapping among cpu id and ACPI processor id. 1916 * On system with ACPI device configuration for CPU enabled, acpica_map_cpu() 1917 * will be called before acpica_add_processor_to_map(), otherwise 1918 * acpica_map_cpu() will be called after acpica_add_processor_to_map(). 1919 */ 1920 ACPI_STATUS 1921 acpica_add_processor_to_map(UINT32 acpi_id, ACPI_HANDLE obj, UINT32 apic_id) 1922 { 1923 int i; 1924 ACPI_STATUS rc = AE_OK; 1925 struct cpu_map_item *item = NULL; 1926 1927 ASSERT(obj != NULL); 1928 if (obj == NULL) { 1929 return (AE_ERROR); 1930 } 1931 1932 mutex_enter(&cpu_map_lock); 1933 1934 /* 1935 * Special case for uppc 1936 * If we're a uppc system and ACPI device configuration for CPU has 1937 * been disabled, there won't be a CPU map yet because uppc psm doesn't 1938 * call acpica_map_cpu(). So create one and use the passed-in processor 1939 * as CPU 0 1940 */ 1941 if (cpu_map == NULL && 1942 !acpica_get_devcfg_feature(ACPI_DEVCFG_CPU)) { 1943 acpica_grow_cpu_map(); 1944 ASSERT(cpu_map != NULL); 1945 item = kmem_zalloc(sizeof (*item), KM_SLEEP); 1946 item->cpu_id = 0; 1947 item->proc_id = acpi_id; 1948 item->apic_id = apic_id; 1949 item->obj = obj; 1950 cpu_map[0] = item; 1951 cpu_map_count = 1; 1952 mutex_exit(&cpu_map_lock); 1953 return (AE_OK); 1954 } 1955 1956 for (i = 0; i < cpu_map_count; i++) { 1957 if (cpu_map[i]->obj == obj) { 1958 rc = AE_ALREADY_EXISTS; 1959 break; 1960 } else if (cpu_map[i]->proc_id == acpi_id) { 1961 ASSERT(item == NULL); 1962 item = cpu_map[i]; 1963 } 1964 } 1965 1966 if (rc == AE_OK) { 1967 if (item != NULL) { 1968 /* 1969 * ACPI alias objects may cause more than one objects 1970 * with the same ACPI processor id, only remember the 1971 * the first object encountered. 1972 */ 1973 if (item->obj == NULL) { 1974 item->obj = obj; 1975 item->apic_id = apic_id; 1976 } else { 1977 rc = AE_ALREADY_EXISTS; 1978 } 1979 } else if (cpu_map_count >= INT_MAX / 2) { 1980 rc = AE_NO_MEMORY; 1981 } else { 1982 acpica_grow_cpu_map(); 1983 ASSERT(cpu_map != NULL); 1984 ASSERT(cpu_map_count < cpu_map_count_max); 1985 item = kmem_zalloc(sizeof (*item), KM_SLEEP); 1986 item->cpu_id = -1; 1987 item->proc_id = acpi_id; 1988 item->apic_id = apic_id; 1989 item->obj = obj; 1990 cpu_map[cpu_map_count] = item; 1991 cpu_map_count++; 1992 } 1993 } 1994 1995 mutex_exit(&cpu_map_lock); 1996 1997 return (rc); 1998 } 1999 2000 ACPI_STATUS 2001 acpica_remove_processor_from_map(UINT32 acpi_id) 2002 { 2003 int i; 2004 ACPI_STATUS rc = AE_NOT_EXIST; 2005 2006 mutex_enter(&cpu_map_lock); 2007 for (i = 0; i < cpu_map_count; i++) { 2008 if (cpu_map[i]->proc_id != acpi_id) { 2009 continue; 2010 } 2011 cpu_map[i]->obj = NULL; 2012 /* Free item if no more reference to it. */ 2013 if (cpu_map[i]->cpu_id == -1) { 2014 kmem_free(cpu_map[i], sizeof (struct cpu_map_item)); 2015 cpu_map[i] = NULL; 2016 cpu_map_count--; 2017 if (i != cpu_map_count) { 2018 cpu_map[i] = cpu_map[cpu_map_count]; 2019 cpu_map[cpu_map_count] = NULL; 2020 } 2021 } 2022 rc = AE_OK; 2023 break; 2024 } 2025 mutex_exit(&cpu_map_lock); 2026 2027 return (rc); 2028 } 2029 2030 ACPI_STATUS 2031 acpica_map_cpu(processorid_t cpuid, UINT32 acpi_id) 2032 { 2033 int i; 2034 ACPI_STATUS rc = AE_OK; 2035 struct cpu_map_item *item = NULL; 2036 2037 ASSERT(cpuid != -1); 2038 if (cpuid == -1) { 2039 return (AE_ERROR); 2040 } 2041 2042 mutex_enter(&cpu_map_lock); 2043 for (i = 0; i < cpu_map_count; i++) { 2044 if (cpu_map[i]->cpu_id == cpuid) { 2045 rc = AE_ALREADY_EXISTS; 2046 break; 2047 } else if (cpu_map[i]->proc_id == acpi_id) { 2048 ASSERT(item == NULL); 2049 item = cpu_map[i]; 2050 } 2051 } 2052 if (rc == AE_OK) { 2053 if (item != NULL) { 2054 if (item->cpu_id == -1) { 2055 item->cpu_id = cpuid; 2056 } else { 2057 rc = AE_ALREADY_EXISTS; 2058 } 2059 } else if (cpu_map_count >= INT_MAX / 2) { 2060 rc = AE_NO_MEMORY; 2061 } else { 2062 acpica_grow_cpu_map(); 2063 ASSERT(cpu_map != NULL); 2064 ASSERT(cpu_map_count < cpu_map_count_max); 2065 item = kmem_zalloc(sizeof (*item), KM_SLEEP); 2066 item->cpu_id = cpuid; 2067 item->proc_id = acpi_id; 2068 item->apic_id = UINT32_MAX; 2069 item->obj = NULL; 2070 cpu_map[cpu_map_count] = item; 2071 cpu_map_count++; 2072 } 2073 } 2074 mutex_exit(&cpu_map_lock); 2075 2076 return (rc); 2077 } 2078 2079 ACPI_STATUS 2080 acpica_unmap_cpu(processorid_t cpuid) 2081 { 2082 int i; 2083 ACPI_STATUS rc = AE_NOT_EXIST; 2084 2085 ASSERT(cpuid != -1); 2086 if (cpuid == -1) { 2087 return (rc); 2088 } 2089 2090 mutex_enter(&cpu_map_lock); 2091 for (i = 0; i < cpu_map_count; i++) { 2092 if (cpu_map[i]->cpu_id != cpuid) { 2093 continue; 2094 } 2095 cpu_map[i]->cpu_id = -1; 2096 /* Free item if no more reference. */ 2097 if (cpu_map[i]->obj == NULL) { 2098 kmem_free(cpu_map[i], sizeof (struct cpu_map_item)); 2099 cpu_map[i] = NULL; 2100 cpu_map_count--; 2101 if (i != cpu_map_count) { 2102 cpu_map[i] = cpu_map[cpu_map_count]; 2103 cpu_map[cpu_map_count] = NULL; 2104 } 2105 } 2106 rc = AE_OK; 2107 break; 2108 } 2109 mutex_exit(&cpu_map_lock); 2110 2111 return (rc); 2112 } 2113 2114 ACPI_STATUS 2115 acpica_get_cpu_object_by_cpuid(processorid_t cpuid, ACPI_HANDLE *hdlp) 2116 { 2117 int i; 2118 ACPI_STATUS rc = AE_NOT_EXIST; 2119 2120 ASSERT(cpuid != -1); 2121 if (cpuid == -1) { 2122 return (rc); 2123 } 2124 2125 mutex_enter(&cpu_map_lock); 2126 for (i = 0; i < cpu_map_count; i++) { 2127 if (cpu_map[i]->cpu_id == cpuid && cpu_map[i]->obj != NULL) { 2128 *hdlp = cpu_map[i]->obj; 2129 rc = AE_OK; 2130 break; 2131 } 2132 } 2133 mutex_exit(&cpu_map_lock); 2134 2135 return (rc); 2136 } 2137 2138 ACPI_STATUS 2139 acpica_get_cpu_object_by_procid(UINT32 procid, ACPI_HANDLE *hdlp) 2140 { 2141 int i; 2142 ACPI_STATUS rc = AE_NOT_EXIST; 2143 2144 mutex_enter(&cpu_map_lock); 2145 for (i = 0; i < cpu_map_count; i++) { 2146 if (cpu_map[i]->proc_id == procid && cpu_map[i]->obj != NULL) { 2147 *hdlp = cpu_map[i]->obj; 2148 rc = AE_OK; 2149 break; 2150 } 2151 } 2152 mutex_exit(&cpu_map_lock); 2153 2154 return (rc); 2155 } 2156 2157 ACPI_STATUS 2158 acpica_get_cpu_object_by_apicid(UINT32 apicid, ACPI_HANDLE *hdlp) 2159 { 2160 int i; 2161 ACPI_STATUS rc = AE_NOT_EXIST; 2162 2163 ASSERT(apicid != UINT32_MAX); 2164 if (apicid == UINT32_MAX) { 2165 return (rc); 2166 } 2167 2168 mutex_enter(&cpu_map_lock); 2169 for (i = 0; i < cpu_map_count; i++) { 2170 if (cpu_map[i]->apic_id == apicid && cpu_map[i]->obj != NULL) { 2171 *hdlp = cpu_map[i]->obj; 2172 rc = AE_OK; 2173 break; 2174 } 2175 } 2176 mutex_exit(&cpu_map_lock); 2177 2178 return (rc); 2179 } 2180 2181 void 2182 acpica_set_core_feature(uint64_t features) 2183 { 2184 atomic_or_64(&acpica_core_features, features); 2185 } 2186 2187 void 2188 acpica_clear_core_feature(uint64_t features) 2189 { 2190 atomic_and_64(&acpica_core_features, ~features); 2191 } 2192 2193 uint64_t 2194 acpica_get_core_feature(uint64_t features) 2195 { 2196 return (acpica_core_features & features); 2197 } 2198 2199 void 2200 acpica_set_devcfg_feature(uint64_t features) 2201 { 2202 atomic_or_64(&acpica_devcfg_features, features); 2203 } 2204 2205 void 2206 acpica_clear_devcfg_feature(uint64_t features) 2207 { 2208 atomic_and_64(&acpica_devcfg_features, ~features); 2209 } 2210 2211 uint64_t 2212 acpica_get_devcfg_feature(uint64_t features) 2213 { 2214 return (acpica_devcfg_features & features); 2215 } 2216 2217 void 2218 acpica_get_global_FADT(ACPI_TABLE_FADT **gbl_FADT) 2219 { 2220 *gbl_FADT = &AcpiGbl_FADT; 2221 } 2222