xref: /titanic_50/usr/src/uts/i86pc/os/pci_neptune.c (revision 0bb073995ac5a95bd35f2dd790df1ea3d8c2d507)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 /*
30  * Support for Intel "Neptune" PCI chip set
31  */
32 
33 #include <sys/types.h>
34 #include <sys/pci.h>
35 #include <sys/pci_impl.h>
36 #include <sys/sunddi.h>
37 #include <sys/pci_cfgspace_impl.h>
38 
39 /*
40  * This variable is a place holder for the initial value in PCI_PMC register
41  * of neptune chipset.
42  */
43 static unsigned char neptune_BIOS_cfg_method = 0;
44 
45 /*
46  * Special hack for Intel's Neptune chipset, 82433NX and 82434NX.
47  *
48  * The motherboards I've seen still use a version of the BIOS
49  * that operates using Configuration Mechanism #2 like the older
50  * Mercury BIOS and chipset (the 82433LX and 82434LX).
51  *
52  */
53 boolean_t
54 pci_check_neptune(void)
55 {
56 	uint8_t		oldstatus;
57 	uint32_t	tmp;
58 
59 	/* enable the config address space, bus=0 function=0 */
60 	oldstatus = inb(PCI_CSE_PORT);
61 	outb(PCI_CSE_PORT, PCI_MECH2_CONFIG_ENABLE);
62 	outb(PCI_FORW_PORT, 0);
63 
64 	/*
65 	 * First check the vendor and device ids of the Host to
66 	 * PCI bridge. But it isn't sufficient just to do this check
67 	 * because the same device ID can refer to either
68 	 * the Neptune or Mercury chipset.
69 	 */
70 
71 	/* check the vendor id, the device id, and the revision id */
72 	/* the Neptune revision ID == 0x11, allow 0x1? */
73 	if ((inl(PCI_CADDR2(0, PCI_CONF_VENID)) != 0x04a38086) ||
74 		(inb(PCI_CADDR2(0, PCI_CONF_REVID)) & 0xf0) != 0x10) {
75 		/* disable mechanism #2 config address space */
76 		outb(PCI_CSE_PORT, oldstatus);
77 		return (B_FALSE);
78 	}
79 
80 	/* disable mechanism #2 config address space */
81 	outb(PCI_CSE_PORT, oldstatus);
82 
83 	/*
84 	 * Now I know that the bridge *might* be a Neptune (it could be
85 	 * a Mercury chip.) Try enabling mechanism #1 to differentiate
86 	 * between the two chipsets.
87 	 */
88 
89 	/*
90 	 * save the old value in case it's not Neptune (the Mercury
91 	 * chip has the deturbo and reset bits in the 0xcf9 register
92 	 * and the forward register at 0xcfa)
93 	 */
94 	tmp = inl(PCI_CONFADD);
95 
96 	/*
97 	 * The Intel Neptune chipset defines this extra register
98 	 * to enable Config Mechanism #1.
99 	 */
100 	neptune_BIOS_cfg_method = inb(PCI_PMC);
101 	outb(PCI_PMC, neptune_BIOS_cfg_method | 1);
102 
103 	/* make certain mechanism #1 works correctly */
104 	/* check the vendor and device id's of the Host to PCI bridge */
105 	outl(PCI_CONFADD, PCI_CADDR1(0, 0, 0, PCI_CONF_VENID));
106 	if (inl(PCI_CONFDATA) != ((0x04a3 << 16) | 0x8086)) {
107 		outb(PCI_PMC, neptune_BIOS_cfg_method);
108 		outl(PCI_CONFADD, tmp);
109 		return (B_FALSE);
110 	}
111 	outb(PCI_PMC, neptune_BIOS_cfg_method);
112 	return (B_TRUE);
113 }
114 
115 static void
116 pci_neptune_enable()
117 {
118 	/*
119 	 * Switch the chipset to use Mechanism 1.
120 	 */
121 	mutex_enter(&pcicfg_chipset_mutex);
122 	outb(PCI_PMC, neptune_BIOS_cfg_method | 1);
123 }
124 
125 static void
126 pci_neptune_disable()
127 {
128 	/*
129 	 * The Neptune chipset has a bug that if you write the PMC,
130 	 * it erroneously looks at some of the bits in the latches for
131 	 * adjacent registers... like, say, the "reset" bit.  We zero
132 	 * out the config address register to work around this bug.
133 	 */
134 	outl(PCI_CONFADD, PCI_CADDR1(0, 0, 0, 0));
135 	outb(PCI_PMC, neptune_BIOS_cfg_method);
136 	mutex_exit(&pcicfg_chipset_mutex);
137 }
138 
139 uint8_t
140 pci_neptune_getb(int bus, int device, int function, int reg)
141 {
142 	uint8_t	val;
143 
144 	pci_neptune_enable();
145 
146 	val = pci_mech1_getb(bus, device, function, reg);
147 
148 	pci_neptune_disable();
149 	return (val);
150 }
151 
152 uint16_t
153 pci_neptune_getw(int bus, int device, int function, int reg)
154 {
155 	uint16_t val;
156 
157 	pci_neptune_enable();
158 
159 	val = pci_mech1_getw(bus, device, function, reg);
160 
161 	pci_neptune_disable();
162 	return (val);
163 }
164 
165 uint32_t
166 pci_neptune_getl(int bus, int device, int function, int reg)
167 {
168 	uint32_t val;
169 
170 	pci_neptune_enable();
171 
172 	val = pci_mech1_getl(bus, device, function, reg);
173 
174 	pci_neptune_disable();
175 	return (val);
176 }
177 
178 void
179 pci_neptune_putb(int bus, int device, int function, int reg, uint8_t val)
180 {
181 	pci_neptune_enable();
182 
183 	pci_mech1_putb(bus, device, function, reg, val);
184 
185 	pci_neptune_disable();
186 }
187 
188 void
189 pci_neptune_putw(int bus, int device, int function, int reg, uint16_t val)
190 {
191 	pci_neptune_enable();
192 
193 	pci_mech1_putw(bus, device, function, reg, val);
194 
195 	pci_neptune_disable();
196 }
197 
198 void
199 pci_neptune_putl(int bus, int device, int function, int reg, uint32_t val)
200 {
201 	pci_neptune_enable();
202 
203 	pci_mech1_putl(bus, device, function, reg, val);
204 
205 	pci_neptune_disable();
206 }
207