1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 /* 27 * Defines for user SCSI commands * 28 */ 29 30 #ifndef _SYS_SCSI_IMPL_USCSI_H 31 #define _SYS_SCSI_IMPL_USCSI_H 32 33 #pragma ident "%Z%%M% %I% %E% SMI" 34 35 #ifdef __cplusplus 36 extern "C" { 37 #endif 38 39 /* 40 * definition for user-scsi command structure 41 */ 42 struct uscsi_cmd { 43 int uscsi_flags; /* read, write, etc. see below */ 44 short uscsi_status; /* resulting status */ 45 short uscsi_timeout; /* Command Timeout */ 46 caddr_t uscsi_cdb; /* cdb to send to target */ 47 caddr_t uscsi_bufaddr; /* i/o source/destination */ 48 size_t uscsi_buflen; /* size of i/o to take place */ 49 size_t uscsi_resid; /* resid from i/o operation */ 50 uchar_t uscsi_cdblen; /* # of valid cdb bytes */ 51 uchar_t uscsi_rqlen; /* size of uscsi_rqbuf */ 52 uchar_t uscsi_rqstatus; /* status of request sense cmd */ 53 uchar_t uscsi_rqresid; /* resid of request sense cmd */ 54 caddr_t uscsi_rqbuf; /* request sense buffer */ 55 void *uscsi_reserved_5; /* Reserved for Future Use */ 56 }; 57 58 #if defined(_SYSCALL32) 59 struct uscsi_cmd32 { 60 int uscsi_flags; /* read, write, etc. see below */ 61 short uscsi_status; /* resulting status */ 62 short uscsi_timeout; /* Command Timeout */ 63 caddr32_t uscsi_cdb; /* cdb to send to target */ 64 caddr32_t uscsi_bufaddr; /* i/o source/destination */ 65 size32_t uscsi_buflen; /* size of i/o to take place */ 66 size32_t uscsi_resid; /* resid from i/o operation */ 67 uchar_t uscsi_cdblen; /* # of valid cdb bytes */ 68 uchar_t uscsi_rqlen; /* size of uscsi_rqbuf */ 69 uchar_t uscsi_rqstatus; /* status of request sense cmd */ 70 uchar_t uscsi_rqresid; /* resid of request sense cmd */ 71 caddr32_t uscsi_rqbuf; /* request sense buffer */ 72 caddr32_t uscsi_reserved_5; /* Reserved for Future Use */ 73 }; 74 75 #define uscsi_cmd32touscsi_cmd(u32, ucmd) \ 76 ucmd->uscsi_flags = u32->uscsi_flags; \ 77 ucmd->uscsi_status = u32->uscsi_status; \ 78 ucmd->uscsi_timeout = u32->uscsi_timeout; \ 79 ucmd->uscsi_cdb = (caddr_t)(uintptr_t)u32->uscsi_cdb; \ 80 ucmd->uscsi_bufaddr = (caddr_t)(uintptr_t)u32->uscsi_bufaddr; \ 81 ucmd->uscsi_buflen = (size_t)u32->uscsi_buflen; \ 82 ucmd->uscsi_resid = (size_t)u32->uscsi_resid; \ 83 ucmd->uscsi_cdblen = u32->uscsi_cdblen; \ 84 ucmd->uscsi_rqlen = u32->uscsi_rqlen; \ 85 ucmd->uscsi_rqstatus = u32->uscsi_rqstatus; \ 86 ucmd->uscsi_rqresid = u32->uscsi_rqresid; \ 87 ucmd->uscsi_rqbuf = (caddr_t)(uintptr_t)u32->uscsi_rqbuf; \ 88 ucmd->uscsi_reserved_5 = (void *)(uintptr_t)u32->uscsi_reserved_5; 89 90 91 #define uscsi_cmdtouscsi_cmd32(ucmd, u32) \ 92 u32->uscsi_flags = ucmd->uscsi_flags; \ 93 u32->uscsi_status = ucmd->uscsi_status; \ 94 u32->uscsi_timeout = ucmd->uscsi_timeout; \ 95 u32->uscsi_cdb = (caddr32_t)(uintptr_t)ucmd->uscsi_cdb; \ 96 u32->uscsi_bufaddr = (caddr32_t)(uintptr_t)ucmd->uscsi_bufaddr; \ 97 u32->uscsi_buflen = (size32_t)ucmd->uscsi_buflen; \ 98 u32->uscsi_resid = (size32_t)ucmd->uscsi_resid; \ 99 u32->uscsi_cdblen = ucmd->uscsi_cdblen; \ 100 u32->uscsi_rqlen = ucmd->uscsi_rqlen; \ 101 u32->uscsi_rqstatus = ucmd->uscsi_rqstatus; \ 102 u32->uscsi_rqresid = ucmd->uscsi_rqresid; \ 103 u32->uscsi_rqbuf = (caddr32_t)(uintptr_t)ucmd->uscsi_rqbuf; \ 104 u32->uscsi_reserved_5 = (caddr32_t)(uintptr_t)ucmd->uscsi_reserved_5; 105 106 #endif /* _SYSCALL32 */ 107 108 109 /* 110 * flags for uscsi_flags field 111 */ 112 /* 113 * generic flags 114 */ 115 #define USCSI_WRITE 0x00000 /* send data to device */ 116 #define USCSI_SILENT 0x00001 /* no error messages */ 117 #define USCSI_DIAGNOSE 0x00002 /* fail if any error occurs */ 118 #define USCSI_ISOLATE 0x00004 /* isolate from normal commands */ 119 #define USCSI_READ 0x00008 /* get data from device */ 120 #define USCSI_RESET_LUN 0x40000 /* Reset logical unit */ 121 #define USCSI_RESET 0x04000 /* Reset target */ 122 #define USCSI_RESET_TARGET USCSI_RESET /* Reset target */ 123 #define USCSI_RESET_ALL 0x08000 /* Reset all targets */ 124 #define USCSI_RQENABLE 0x10000 /* Enable Request Sense extensions */ 125 #define USCSI_RENEGOT 0x20000 /* renegotiate wide/sync on next I/O */ 126 127 /* 128 * suitable for parallel SCSI bus only 129 */ 130 #define USCSI_ASYNC 0x01000 /* Set bus to asynchronous mode */ 131 #define USCSI_SYNC 0x02000 /* Return bus to sync mode if possible */ 132 133 /* 134 * the following flags should not be used at user level but may 135 * be used by a scsi target driver for internal commands 136 */ 137 /* 138 * generic flags 139 */ 140 #define USCSI_NOINTR 0x00040 /* No interrupts, NEVER to use this flag */ 141 #define USCSI_NOTAG 0x00100 /* Disable tagged queueing */ 142 #define USCSI_OTAG 0x00200 /* ORDERED QUEUE tagged cmd */ 143 #define USCSI_HTAG 0x00400 /* HEAD OF QUEUE tagged cmd */ 144 #define USCSI_HEAD 0x00800 /* Head of HA queue */ 145 146 /* 147 * suitable for parallel SCSI bus only 148 */ 149 #define USCSI_NOPARITY 0x00010 /* run command without parity */ 150 #define USCSI_NODISCON 0x00020 /* run command without disconnects */ 151 152 153 #define USCSI_RESERVED 0xfffc0000 /* Reserved Bits, must be zero */ 154 155 struct uscsi_rqs { 156 int rqs_flags; /* see below */ 157 ushort_t rqs_buflen; /* maximum number or bytes to return */ 158 ushort_t rqs_resid; /* untransferred length of RQS data */ 159 caddr_t rqs_bufaddr; /* request sense buffer */ 160 }; 161 162 #if defined(_SYSCALL32) 163 struct uscsi_rqs32 { 164 int rqs_flags; /* see below */ 165 ushort_t rqs_buflen; /* maximum number or bytes to return */ 166 ushort_t rqs_resid; /* untransferred length of RQS data */ 167 caddr32_t rqs_bufaddr; /* request sense buffer */ 168 }; 169 #endif /* _SYSCALL32 */ 170 171 172 /* 173 * uscsi_rqs flags 174 */ 175 176 #define RQS_OVR 0x01 /* RQS data has been overwritten */ 177 #define RQS_VALID 0x02 /* RQS data is valid */ 178 179 /* 180 * User SCSI io control command 181 */ 182 #define USCSIIOC (0x04 << 8) 183 #define USCSICMD (USCSIIOC|201) /* user scsi command */ 184 #define USCSIGETRQS (USCSIIOC|202) /* retrieve SCSI sense data */ 185 186 #ifdef _KERNEL 187 188 #include <sys/scsi/scsi_types.h> 189 190 int scsi_uscsi_alloc_and_copyin(intptr_t, int, 191 struct scsi_address *, struct uscsi_cmd **); 192 int scsi_uscsi_handle_cmd(dev_t, enum uio_seg, 193 struct uscsi_cmd *, int (*)(struct buf *), 194 struct buf *, void *); 195 int scsi_uscsi_copyout_and_free(intptr_t, struct uscsi_cmd *); 196 197 #endif /* _KERNEL */ 198 199 #ifdef __cplusplus 200 } 201 #endif 202 203 #endif /* _SYS_SCSI_IMPL_USCSI_H */ 204