1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2013 Garrett D'Amore <garrett@damore.org> 24 * Copyright 2016 Joyent, Inc. 25 * 26 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 27 * Use is subject to license terms. 28 */ 29 30 #ifndef _SYS_FEATURE_TESTS_H 31 #define _SYS_FEATURE_TESTS_H 32 33 #include <sys/ccompile.h> 34 #include <sys/isa_defs.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 /* 41 * Values of _POSIX_C_SOURCE 42 * 43 * undefined not a POSIX compilation 44 * 1 POSIX.1-1990 compilation 45 * 2 POSIX.2-1992 compilation 46 * 199309L POSIX.1b-1993 compilation (Real Time) 47 * 199506L POSIX.1c-1995 compilation (POSIX Threads) 48 * 200112L POSIX.1-2001 compilation (Austin Group Revision) 49 * 200809L POSIX.1-2008 compilation 50 */ 51 #if defined(_POSIX_SOURCE) && !defined(_POSIX_C_SOURCE) 52 #define _POSIX_C_SOURCE 1 53 #endif 54 55 /* 56 * The feature test macros __XOPEN_OR_POSIX, _STRICT_STDC, _STRICT_SYMBOLS, 57 * and _STDC_C99 are Sun implementation specific macros created in order to 58 * compress common standards specified feature test macros for easier reading. 59 * These macros should not be used by the application developer as 60 * unexpected results may occur. Instead, the user should reference 61 * standards(5) for correct usage of the standards feature test macros. 62 * 63 * __XOPEN_OR_POSIX Used in cases where a symbol is defined by both 64 * X/Open or POSIX or in the negative, when neither 65 * X/Open or POSIX defines a symbol. 66 * 67 * _STRICT_STDC __STDC__ is specified by the C Standards and defined 68 * by the compiler. For Sun compilers the value of 69 * __STDC__ is either 1, 0, or not defined based on the 70 * compilation mode (see cc(1)). When the value of 71 * __STDC__ is 1 and in the absence of any other feature 72 * test macros, the namespace available to the application 73 * is limited to only those symbols defined by the C 74 * Standard. _STRICT_STDC provides a more readable means 75 * of identifying symbols defined by the standard, or in 76 * the negative, symbols that are extensions to the C 77 * Standard. See additional comments for GNU C differences. 78 * 79 * _STDC_C99 __STDC_VERSION__ is specified by the C standards and 80 * defined by the compiler and indicates the version of 81 * the C standard. A value of 199901L indicates a 82 * compiler that complies with ISO/IEC 9899:1999, other- 83 * wise known as the C99 standard. 84 * 85 * _STDC_C11 Like _STDC_C99 except that the value of __STDC_VERSION__ 86 * is 201112L indicating a compiler that compiles with 87 * ISO/IEXC 9899:2011, otherwise known as the C11 standard. 88 * 89 * _STRICT_SYMBOLS Used in cases where symbol visibility is restricted 90 * by the standards, and the user has not explicitly 91 * relaxed the strictness via __EXTENSIONS__. 92 */ 93 94 #if defined(_XOPEN_SOURCE) || defined(_POSIX_C_SOURCE) 95 #define __XOPEN_OR_POSIX 96 #endif 97 98 /* 99 * ISO/IEC 9899:1990 and it's revisions, ISO/IEC 9899:1999 and ISO/IEC 100 * 99899:2011 specify the following predefined macro name: 101 * 102 * __STDC__ The integer constant 1, intended to indicate a conforming 103 * implementation. 104 * 105 * Furthermore, a strictly conforming program shall use only those features 106 * of the language and library specified in these standards. A conforming 107 * implementation shall accept any strictly conforming program. 108 * 109 * Based on these requirements, Sun's C compiler defines __STDC__ to 1 for 110 * strictly conforming environments and __STDC__ to 0 for environments that 111 * use ANSI C semantics but allow extensions to the C standard. For non-ANSI 112 * C semantics, Sun's C compiler does not define __STDC__. 113 * 114 * The GNU C project interpretation is that __STDC__ should always be defined 115 * to 1 for compilation modes that accept ANSI C syntax regardless of whether 116 * or not extensions to the C standard are used. Violations of conforming 117 * behavior are conditionally flagged as warnings via the use of the 118 * -pedantic option. In addition to defining __STDC__ to 1, the GNU C 119 * compiler also defines __STRICT_ANSI__ as a means of specifying strictly 120 * conforming environments using the -ansi or -std=<standard> options. 121 * 122 * In the absence of any other compiler options, Sun and GNU set the value 123 * of __STDC__ as follows when using the following options: 124 * 125 * Value of __STDC__ __STRICT_ANSI__ 126 * 127 * cc -Xa (default) 0 undefined 128 * cc -Xt (transitional) 0 undefined 129 * cc -Xc (strictly conforming) 1 undefined 130 * cc -Xs (K&R C) undefined undefined 131 * 132 * gcc (default) 1 undefined 133 * gcc -ansi, -std={c89, c99,...) 1 defined 134 * gcc -traditional (K&R) undefined undefined 135 * 136 * The default compilation modes for Sun C compilers versus GNU C compilers 137 * results in a differing value for __STDC__ which results in a more 138 * restricted namespace when using Sun compilers. To allow both GNU and Sun 139 * interpretations to peacefully co-exist, we use the following Sun 140 * implementation _STRICT_STDC_ macro: 141 */ 142 143 #if (__STDC__ - 0 == 1 && !defined(__GNUC__)) || \ 144 (defined(__GNUC__) && defined(__STRICT_ANSI__)) 145 #define _STRICT_STDC 146 #else 147 #undef _STRICT_STDC 148 #endif 149 150 /* 151 * Compiler complies with ISO/IEC 9899:1999 or ISO/IEC 9989:2011 152 */ 153 154 #if __STDC_VERSION__ - 0 >= 201112L 155 #define _STDC_C11 156 #endif 157 158 #if __STDC_VERSION__ - 0 >= 199901L 159 #define _STDC_C99 160 #endif 161 162 /* 163 * Use strict symbol visibility. 164 */ 165 #if (defined(_STRICT_STDC) || defined(__XOPEN_OR_POSIX)) && \ 166 !defined(__EXTENSIONS__) 167 #define _STRICT_SYMBOLS 168 #endif 169 170 /* 171 * Large file interfaces: 172 * 173 * _LARGEFILE_SOURCE 174 * 1 large file-related additions to POSIX 175 * interfaces requested (fseeko, etc.) 176 * _LARGEFILE64_SOURCE 177 * 1 transitional large-file-related interfaces 178 * requested (seek64, stat64, etc.) 179 * 180 * The corresponding announcement macros are respectively: 181 * _LFS_LARGEFILE 182 * _LFS64_LARGEFILE 183 * (These are set in <unistd.h>.) 184 * 185 * Requesting _LARGEFILE64_SOURCE implies requesting _LARGEFILE_SOURCE as 186 * well. 187 * 188 * The large file interfaces are made visible regardless of the initial values 189 * of the feature test macros under certain circumstances: 190 * - If no explicit standards-conforming environment is requested (neither 191 * of _POSIX_SOURCE nor _XOPEN_SOURCE is defined and the value of 192 * __STDC__ does not imply standards conformance). 193 * - Extended system interfaces are explicitly requested (__EXTENSIONS__ 194 * is defined). 195 * - Access to in-kernel interfaces is requested (_KERNEL or _KMEMUSER is 196 * defined). (Note that this dependency is an artifact of the current 197 * kernel implementation and may change in future releases.) 198 */ 199 #if (!defined(_STRICT_STDC) && !defined(__XOPEN_OR_POSIX)) || \ 200 defined(_KERNEL) || defined(_KMEMUSER) || \ 201 defined(__EXTENSIONS__) 202 #undef _LARGEFILE64_SOURCE 203 #define _LARGEFILE64_SOURCE 1 204 #endif 205 #if _LARGEFILE64_SOURCE - 0 == 1 206 #undef _LARGEFILE_SOURCE 207 #define _LARGEFILE_SOURCE 1 208 #endif 209 210 /* 211 * Large file compilation environment control: 212 * 213 * The setting of _FILE_OFFSET_BITS controls the size of various file-related 214 * types and governs the mapping between file-related source function symbol 215 * names and the corresponding binary entry points. 216 * 217 * In the 32-bit environment, the default value is 32; if not set, set it to 218 * the default here, to simplify tests in other headers. 219 * 220 * In the 64-bit compilation environment, the only value allowed is 64. 221 */ 222 #if defined(_LP64) 223 #ifndef _FILE_OFFSET_BITS 224 #define _FILE_OFFSET_BITS 64 225 #endif 226 #if _FILE_OFFSET_BITS - 0 != 64 227 #error "invalid _FILE_OFFSET_BITS value specified" 228 #endif 229 #else /* _LP64 */ 230 #ifndef _FILE_OFFSET_BITS 231 #define _FILE_OFFSET_BITS 32 232 #endif 233 #if _FILE_OFFSET_BITS - 0 != 32 && _FILE_OFFSET_BITS - 0 != 64 234 #error "invalid _FILE_OFFSET_BITS value specified" 235 #endif 236 #endif /* _LP64 */ 237 238 /* 239 * Use of _XOPEN_SOURCE 240 * 241 * The following X/Open specifications are supported: 242 * 243 * X/Open Portability Guide, Issue 3 (XPG3) 244 * X/Open CAE Specification, Issue 4 (XPG4) 245 * X/Open CAE Specification, Issue 4, Version 2 (XPG4v2) 246 * X/Open CAE Specification, Issue 5 (XPG5) 247 * Open Group Technical Standard, Issue 6 (XPG6), also referred to as 248 * IEEE Std. 1003.1-2001 and ISO/IEC 9945:2002. 249 * Open Group Technical Standard, Issue 7 (XPG7), also referred to as 250 * IEEE Std. 1003.1-2008 and ISO/IEC 9945:2009. 251 * 252 * XPG4v2 is also referred to as UNIX 95 (SUS or SUSv1). 253 * XPG5 is also referred to as UNIX 98 or the Single Unix Specification, 254 * Version 2 (SUSv2) 255 * XPG6 is the result of a merge of the X/Open and POSIX specifications 256 * and as such is also referred to as IEEE Std. 1003.1-2001 in 257 * addition to UNIX 03 and SUSv3. 258 * XPG7 is also referred to as UNIX 08 and SUSv4. 259 * 260 * When writing a conforming X/Open application, as per the specification 261 * requirements, the appropriate feature test macros must be defined at 262 * compile time. These are as follows. For more info, see standards(5). 263 * 264 * Feature Test Macro Specification 265 * ------------------------------------------------ ------------- 266 * _XOPEN_SOURCE XPG3 267 * _XOPEN_SOURCE && _XOPEN_VERSION = 4 XPG4 268 * _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED = 1 XPG4v2 269 * _XOPEN_SOURCE = 500 XPG5 270 * _XOPEN_SOURCE = 600 (or POSIX_C_SOURCE=200112L) XPG6 271 * _XOPEN_SOURCE = 700 (or POSIX_C_SOURCE=200809L) XPG7 272 * 273 * In order to simplify the guards within the headers, the following 274 * implementation private test macros have been created. Applications 275 * must NOT use these private test macros as unexpected results will 276 * occur. 277 * 278 * Note that in general, the use of these private macros is cumulative. 279 * For example, the use of _XPG3 with no other restrictions on the X/Open 280 * namespace will make the symbols visible for XPG3 through XPG6 281 * compilation environments. The use of _XPG4_2 with no other X/Open 282 * namespace restrictions indicates that the symbols were introduced in 283 * XPG4v2 and are therefore visible for XPG4v2 through XPG6 compilation 284 * environments, but not for XPG3 or XPG4 compilation environments. 285 * 286 * _XPG3 X/Open Portability Guide, Issue 3 (XPG3) 287 * _XPG4 X/Open CAE Specification, Issue 4 (XPG4) 288 * _XPG4_2 X/Open CAE Specification, Issue 4, Version 2 (XPG4v2/UNIX 95/SUS) 289 * _XPG5 X/Open CAE Specification, Issue 5 (XPG5/UNIX 98/SUSv2) 290 * _XPG6 Open Group Technical Standard, Issue 6 (XPG6/UNIX 03/SUSv3) 291 * _XPG7 Open Group Technical Standard, Issue 7 (XPG7/UNIX 08/SUSv4) 292 */ 293 294 /* X/Open Portability Guide, Issue 3 */ 295 #if defined(_XOPEN_SOURCE) && (_XOPEN_SOURCE - 0 < 500) && \ 296 (_XOPEN_VERSION - 0 < 4) && !defined(_XOPEN_SOURCE_EXTENDED) 297 #define _XPG3 298 /* X/Open CAE Specification, Issue 4 */ 299 #elif (defined(_XOPEN_SOURCE) && _XOPEN_VERSION - 0 == 4) 300 #define _XPG4 301 #define _XPG3 302 /* X/Open CAE Specification, Issue 4, Version 2 */ 303 #elif (defined(_XOPEN_SOURCE) && _XOPEN_SOURCE_EXTENDED - 0 == 1) 304 #define _XPG4_2 305 #define _XPG4 306 #define _XPG3 307 /* X/Open CAE Specification, Issue 5 */ 308 #elif (_XOPEN_SOURCE - 0 == 500) 309 #define _XPG5 310 #define _XPG4_2 311 #define _XPG4 312 #define _XPG3 313 #undef _POSIX_C_SOURCE 314 #define _POSIX_C_SOURCE 199506L 315 /* Open Group Technical Standard , Issue 6 */ 316 #elif (_XOPEN_SOURCE - 0 == 600) || (_POSIX_C_SOURCE - 0 == 200112L) 317 #define _XPG6 318 #define _XPG5 319 #define _XPG4_2 320 #define _XPG4 321 #define _XPG3 322 #undef _POSIX_C_SOURCE 323 #define _POSIX_C_SOURCE 200112L 324 #undef _XOPEN_SOURCE 325 #define _XOPEN_SOURCE 600 326 327 /* Open Group Technical Standard, Issue 7 */ 328 #elif (_XOPEN_SOURCE - 0 == 700) || (_POSIX_C_SOURCE - 0 == 200809L) 329 #define _XPG7 330 #define _XPG6 331 #define _XPG5 332 #define _XPG4_2 333 #define _XPG4 334 #define _XPG3 335 #undef _POSIX_C_SOURCE 336 #define _POSIX_C_SOURCE 200809L 337 #undef _XOPEN_SOURCE 338 #define _XOPEN_SOURCE 700 339 #endif 340 341 /* 342 * _XOPEN_VERSION is defined by the X/Open specifications and is not 343 * normally defined by the application, except in the case of an XPG4 344 * application. On the implementation side, _XOPEN_VERSION defined with 345 * the value of 3 indicates an XPG3 application. _XOPEN_VERSION defined 346 * with the value of 4 indicates an XPG4 or XPG4v2 (UNIX 95) application. 347 * _XOPEN_VERSION defined with a value of 500 indicates an XPG5 (UNIX 98) 348 * application and with a value of 600 indicates an XPG6 (UNIX 03) 349 * application and with a value of 700 indicates an XPG7 (UNIX 08). 350 * The appropriate version is determined by the use of the 351 * feature test macros described earlier. The value of _XOPEN_VERSION 352 * defaults to 3 otherwise indicating support for XPG3 applications. 353 */ 354 #ifndef _XOPEN_VERSION 355 #if defined(_XPG7) 356 #define _XOPEN_VERSION 700 357 #elif defined(_XPG6) 358 #define _XOPEN_VERSION 600 359 #elif defined(_XPG5) 360 #define _XOPEN_VERSION 500 361 #elif defined(_XPG4_2) 362 #define _XOPEN_VERSION 4 363 #else 364 #define _XOPEN_VERSION 3 365 #endif 366 #endif 367 368 /* 369 * ANSI C and ISO 9899:1990 say the type long long doesn't exist in strictly 370 * conforming environments. ISO 9899:1999 says it does. 371 * 372 * The presence of _LONGLONG_TYPE says "long long exists" which is therefore 373 * defined in all but strictly conforming environments that disallow it. 374 */ 375 #if !defined(_STDC_C99) && defined(_STRICT_STDC) && !defined(__GNUC__) 376 /* 377 * Resist attempts to force the definition of long long in this case. 378 */ 379 #if defined(_LONGLONG_TYPE) 380 #error "No long long in strictly conforming ANSI C & 1990 ISO C environments" 381 #endif 382 #else 383 #if !defined(_LONGLONG_TYPE) 384 #define _LONGLONG_TYPE 385 #endif 386 #endif 387 388 /* 389 * The following macro defines a value for the ISO C99 restrict 390 * keyword so that _RESTRICT_KYWD resolves to "restrict" if 391 * an ISO C99 compiler is used, "__restrict" for c++ and "" (null string) 392 * if any other compiler is used. This allows for the use of single 393 * prototype declarations regardless of compiler version. 394 */ 395 #if (defined(__STDC__) && defined(_STDC_C99)) 396 #ifdef __cplusplus 397 #define _RESTRICT_KYWD __restrict 398 #else 399 /* 400 * NOTE: The whitespace between the '#' and 'define' is significant. 401 * It foils gcc's fixincludes from defining a redundant 'restrict'. 402 */ 403 /* CSTYLED */ 404 # define _RESTRICT_KYWD restrict 405 #endif 406 #else 407 #define _RESTRICT_KYWD 408 #endif 409 410 /* 411 * The following macro defines a value for the ISO C11 _Noreturn 412 * keyword so that _NORETURN_KYWD resolves to "_Noreturn" if 413 * an ISO C11 compiler is used and "" (null string) if any other 414 * compiler is used. This allows for the use of single prototype 415 * declarations regardless of compiler version. 416 */ 417 #if (defined(__STDC__) && defined(_STDC_C11)) && !defined(__cplusplus) 418 #define _NORETURN_KYWD _Noreturn 419 #else 420 #define _NORETURN_KYWD 421 #endif 422 423 424 /* 425 * The following macro indicates header support for the ANSI C++ 426 * standard. The ISO/IEC designation for this is ISO/IEC FDIS 14882. 427 */ 428 #define _ISO_CPP_14882_1998 429 430 /* 431 * The following macro indicates header support for the C99 standard, 432 * ISO/IEC 9899:1999, Programming Languages - C. 433 */ 434 #define _ISO_C_9899_1999 435 436 /* 437 * The following macro indicates header support for the C99 standard, 438 * ISO/IEC 9899:2011, Programming Languages - C. 439 */ 440 #define _ISO_C_9899_2011 441 442 /* 443 * The following macro indicates header support for DTrace. The value is an 444 * integer that corresponds to the major version number for DTrace. 445 */ 446 #define _DTRACE_VERSION 1 447 448 #ifdef __cplusplus 449 } 450 #endif 451 452 #endif /* _SYS_FEATURE_TESTS_H */ 453