1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 1982, 2010, Oracle and/or its affiliates. All rights reserved. 24 * 25 * Copyright 2011 Nexenta Systems, Inc. All rights reserved. 26 * Copyright 2012 DEY Storage Systems, Inc. All rights reserved. 27 */ 28 29 #ifndef _SYS_DKIO_H 30 #define _SYS_DKIO_H 31 32 #include <sys/dklabel.h> /* Needed for NDKMAP define */ 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 /* 39 * Structures and definitions for disk io control commands 40 */ 41 42 /* 43 * Structures used as data by ioctl calls. 44 */ 45 46 #define DK_DEVLEN 16 /* device name max length, including */ 47 /* unit # & NULL (ie - "xyc1") */ 48 49 /* 50 * Used for controller info 51 */ 52 struct dk_cinfo { 53 char dki_cname[DK_DEVLEN]; /* controller name (no unit #) */ 54 ushort_t dki_ctype; /* controller type */ 55 ushort_t dki_flags; /* flags */ 56 ushort_t dki_cnum; /* controller number */ 57 uint_t dki_addr; /* controller address */ 58 uint_t dki_space; /* controller bus type */ 59 uint_t dki_prio; /* interrupt priority */ 60 uint_t dki_vec; /* interrupt vector */ 61 char dki_dname[DK_DEVLEN]; /* drive name (no unit #) */ 62 uint_t dki_unit; /* unit number */ 63 uint_t dki_slave; /* slave number */ 64 ushort_t dki_partition; /* partition number */ 65 ushort_t dki_maxtransfer; /* max. transfer size in DEV_BSIZE */ 66 }; 67 68 /* 69 * Controller types 70 */ 71 #define DKC_UNKNOWN 0 72 #define DKC_CDROM 1 /* CD-ROM, SCSI or otherwise */ 73 #define DKC_WDC2880 2 74 #define DKC_XXX_0 3 /* unassigned */ 75 #define DKC_XXX_1 4 /* unassigned */ 76 #define DKC_DSD5215 5 77 #define DKC_ACB4000 7 78 #define DKC_MD21 8 79 #define DKC_XXX_2 9 /* unassigned */ 80 #define DKC_NCRFLOPPY 10 81 #define DKC_SMSFLOPPY 12 82 #define DKC_SCSI_CCS 13 /* SCSI CCS compatible */ 83 #define DKC_INTEL82072 14 /* native floppy chip */ 84 #define DKC_MD 16 /* meta-disk (virtual-disk) driver (obsolete) */ 85 #define DKC_INTEL82077 19 /* 82077 floppy disk controller */ 86 #define DKC_DIRECT 20 /* Intel direct attached device i.e. IDE */ 87 #define DKC_PCMCIA_MEM 21 /* PCMCIA memory disk-like type (Obsolete) */ 88 #define DKC_PCMCIA_ATA 22 /* PCMCIA AT Attached type */ 89 #define DKC_VBD 23 /* virtual block device */ 90 #define DKC_BLKDEV 24 /* generic block device (see blkdev(7d)) */ 91 92 /* 93 * Sun reserves up through 1023 94 */ 95 96 #define DKC_CUSTOMER_BASE 1024 97 98 /* 99 * Flags 100 */ 101 #define DKI_BAD144 0x01 /* use DEC std 144 bad sector fwding */ 102 #define DKI_MAPTRK 0x02 /* controller does track mapping */ 103 #define DKI_FMTTRK 0x04 /* formats only full track at a time */ 104 #define DKI_FMTVOL 0x08 /* formats only full volume at a time */ 105 #define DKI_FMTCYL 0x10 /* formats only full cylinders at a time */ 106 #define DKI_HEXUNIT 0x20 /* unit number is printed as 3 hex digits */ 107 #define DKI_PCMCIA_PFD 0x40 /* PCMCIA pseudo-floppy memory card */ 108 109 /* 110 * Used for all partitions 111 */ 112 struct dk_allmap { 113 struct dk_map dka_map[NDKMAP]; 114 }; 115 116 #if defined(_SYSCALL32) 117 struct dk_allmap32 { 118 struct dk_map32 dka_map[NDKMAP]; 119 }; 120 #endif /* _SYSCALL32 */ 121 122 /* 123 * Definition of a disk's geometry 124 */ 125 struct dk_geom { 126 unsigned short dkg_ncyl; /* # of data cylinders */ 127 unsigned short dkg_acyl; /* # of alternate cylinders */ 128 unsigned short dkg_bcyl; /* cyl offset (for fixed head area) */ 129 unsigned short dkg_nhead; /* # of heads */ 130 unsigned short dkg_obs1; /* obsolete */ 131 unsigned short dkg_nsect; /* # of data sectors per track */ 132 unsigned short dkg_intrlv; /* interleave factor */ 133 unsigned short dkg_obs2; /* obsolete */ 134 unsigned short dkg_obs3; /* obsolete */ 135 unsigned short dkg_apc; /* alternates per cyl (SCSI only) */ 136 unsigned short dkg_rpm; /* revolutions per minute */ 137 unsigned short dkg_pcyl; /* # of physical cylinders */ 138 unsigned short dkg_write_reinstruct; /* # sectors to skip, writes */ 139 unsigned short dkg_read_reinstruct; /* # sectors to skip, reads */ 140 unsigned short dkg_extra[7]; /* for compatible expansion */ 141 }; 142 143 /* 144 * These defines are for historic compatibility with old drivers. 145 */ 146 #define dkg_bhead dkg_obs1 /* used to be head offset */ 147 #define dkg_gap1 dkg_obs2 /* used to be gap1 */ 148 #define dkg_gap2 dkg_obs3 /* used to be gap2 */ 149 150 /* 151 * Disk io control commands 152 * Warning: some other ioctls with the DIOC prefix exist elsewhere. 153 * The Generic DKIOC numbers are from 0 - 50. 154 * The Floppy Driver uses 51 - 100. 155 * The Hard Disk (except SCSI) 101 - 106. (these are obsolete) 156 * The CDROM Driver 151 - 200. 157 * The USCSI ioctl 201 - 250. 158 */ 159 #define DKIOC (0x04 << 8) 160 161 /* 162 * The following ioctls are generic in nature and need to be 163 * suported as appropriate by all disk drivers 164 */ 165 #define DKIOCGGEOM (DKIOC|1) /* Get geometry */ 166 #define DKIOCINFO (DKIOC|3) /* Get info */ 167 #define DKIOCEJECT (DKIOC|6) /* Generic 'eject' */ 168 #define DKIOCGVTOC (DKIOC|11) /* Get VTOC */ 169 #define DKIOCSVTOC (DKIOC|12) /* Set VTOC & Write to Disk */ 170 171 #define DKIOCGEXTVTOC (DKIOC|23) /* Get extended VTOC */ 172 #define DKIOCSEXTVTOC (DKIOC|24) /* Set extended VTOC, Write to Disk */ 173 174 /* 175 * Disk Cache Controls. These ioctls should be supported by 176 * all disk drivers. 177 * 178 * DKIOCFLUSHWRITECACHE when used from user-mode ignores the ioctl 179 * argument, but it should be passed as NULL to allow for future 180 * reinterpretation. From user-mode, this ioctl request is synchronous. 181 * 182 * When invoked from within the kernel, the arg can be NULL to indicate 183 * a synchronous request or can be the address of a struct dk_callback 184 * to request an asynchronous callback when the flush request is complete. 185 * In this case, the flag to the ioctl must include FKIOCTL and the 186 * dkc_callback field of the pointed to struct must be non-null or the 187 * request is made synchronously. 188 * 189 * In the callback case: if the ioctl returns 0, a callback WILL be performed. 190 * If the ioctl returns non-zero, a callback will NOT be performed. 191 * NOTE: In some cases, the callback may be done BEFORE the ioctl call 192 * returns. The caller's locking strategy should be prepared for this case. 193 */ 194 #define DKIOCFLUSHWRITECACHE (DKIOC|34) /* flush cache to phys medium */ 195 196 struct dk_callback { 197 void (*dkc_callback)(void *dkc_cookie, int error); 198 void *dkc_cookie; 199 int dkc_flag; 200 }; 201 202 /* bit flag definitions for dkc_flag */ 203 #define FLUSH_VOLATILE 0x1 /* Bit 0: if set, only flush */ 204 /* volatile cache; otherwise, flush */ 205 /* volatile and non-volatile cache */ 206 207 #define DKIOCGETWCE (DKIOC|36) /* Get current write cache */ 208 /* enablement status */ 209 #define DKIOCSETWCE (DKIOC|37) /* Enable/Disable write cache */ 210 211 /* 212 * The following ioctls are used by Sun drivers to communicate 213 * with their associated format routines. Support of these ioctls 214 * is not required of foreign drivers 215 */ 216 #define DKIOCSGEOM (DKIOC|2) /* Set geometry */ 217 #define DKIOCSAPART (DKIOC|4) /* Set all partitions */ 218 #define DKIOCGAPART (DKIOC|5) /* Get all partitions */ 219 #define DKIOCG_PHYGEOM (DKIOC|32) /* get physical geometry */ 220 #define DKIOCG_VIRTGEOM (DKIOC|33) /* get virtual geometry */ 221 222 /* 223 * The following ioctl's are removable media support 224 */ 225 #define DKIOCLOCK (DKIOC|7) /* Generic 'lock' */ 226 #define DKIOCUNLOCK (DKIOC|8) /* Generic 'unlock' */ 227 #define DKIOCSTATE (DKIOC|13) /* Inquire insert/eject state */ 228 #define DKIOCREMOVABLE (DKIOC|16) /* is media removable */ 229 230 231 /* 232 * ioctl for hotpluggable devices 233 */ 234 #define DKIOCHOTPLUGGABLE (DKIOC|35) /* is hotpluggable */ 235 236 #if defined(__i386) || defined(__amd64) 237 /* ioctl to write extended partition structure into the disk */ 238 #define DKIOCSETEXTPART (DKIOC|46) 239 #endif 240 241 /* ioctl to report whether the disk is solid state or not - used for ZFS */ 242 #define DKIOCSOLIDSTATE (DKIOC|38) 243 244 /* 245 * Ioctl to force driver to re-read the alternate partition and rebuild 246 * the internal defect map. 247 */ 248 #define DKIOCADDBAD (DKIOC|20) /* Re-read the alternate map (IDE) */ 249 #define DKIOCGETDEF (DKIOC|21) /* read defect list (IDE) */ 250 251 /* 252 * Used by applications to get disk defect information from IDE 253 * drives. 254 */ 255 #ifdef _SYSCALL32 256 struct defect_header32 { 257 int head; 258 caddr32_t buffer; 259 }; 260 #endif /* _SYSCALL32 */ 261 262 struct defect_header { 263 int head; 264 caddr_t buffer; 265 }; 266 267 #define DKIOCPARTINFO (DKIOC|22) /* Get partition or slice parameters */ 268 #define DKIOCEXTPARTINFO (DKIOC|19) /* Get extended partition or slice */ 269 /* parameters */ 270 271 272 /* 273 * Used by applications to get partition or slice information 274 */ 275 #ifdef _SYSCALL32 276 struct part_info32 { 277 daddr32_t p_start; 278 int p_length; 279 }; 280 #endif /* _SYSCALL32 */ 281 282 struct part_info { 283 daddr_t p_start; 284 int p_length; 285 }; 286 287 struct extpart_info { 288 diskaddr_t p_start; 289 diskaddr_t p_length; 290 }; 291 292 /* The following ioctls are for Optical Memory Device */ 293 #define DKIOC_EBP_ENABLE (DKIOC|40) /* enable by pass erase on write */ 294 #define DKIOC_EBP_DISABLE (DKIOC|41) /* disable by pass erase on write */ 295 296 /* 297 * This state enum is the argument passed to the DKIOCSTATE ioctl. 298 */ 299 enum dkio_state { DKIO_NONE, DKIO_EJECTED, DKIO_INSERTED, DKIO_DEV_GONE }; 300 301 #define DKIOCGMEDIAINFO (DKIOC|42) /* get information about the media */ 302 303 /* 304 * ioctls to read/write mboot info. 305 */ 306 #define DKIOCGMBOOT (DKIOC|43) /* get mboot info */ 307 #define DKIOCSMBOOT (DKIOC|44) /* set mboot info */ 308 309 /* 310 * ioctl to get the device temperature. 311 */ 312 #define DKIOCGTEMPERATURE (DKIOC|45) /* get temperature */ 313 314 /* 315 * ioctl to get the media info including physical block size 316 */ 317 #define DKIOCGMEDIAINFOEXT (DKIOC|48) 318 319 /* 320 * ioctl to determine whether media is write-protected 321 */ 322 #define DKIOCREADONLY (DKIOC|49) 323 324 /* 325 * Used for providing the temperature. 326 */ 327 328 struct dk_temperature { 329 uint_t dkt_flags; /* Flags */ 330 short dkt_cur_temp; /* Current disk temperature */ 331 short dkt_ref_temp; /* reference disk temperature */ 332 }; 333 334 #define DKT_BYPASS_PM 0x1 335 #define DKT_INVALID_TEMP 0xFFFF 336 337 338 /* 339 * Used for Media info or the current profile info 340 */ 341 struct dk_minfo { 342 uint_t dki_media_type; /* Media type or profile info */ 343 uint_t dki_lbsize; /* Logical blocksize of media */ 344 diskaddr_t dki_capacity; /* Capacity as # of dki_lbsize blks */ 345 }; 346 347 /* 348 * Used for Media info or the current profile info 349 * including physical block size if supported. 350 */ 351 struct dk_minfo_ext { 352 uint_t dki_media_type; /* Media type or profile info */ 353 uint_t dki_lbsize; /* Logical blocksize of media */ 354 diskaddr_t dki_capacity; /* Capacity as # of dki_lbsize blks */ 355 uint_t dki_pbsize; /* Physical blocksize of media */ 356 }; 357 358 /* 359 * Media types or profiles known 360 */ 361 #define DK_UNKNOWN 0x00 /* Media inserted - type unknown */ 362 363 364 /* 365 * SFF 8090 Specification Version 3, media types 0x01 - 0xfffe are retained to 366 * maintain compatibility with SFF8090. The following define the 367 * optical media type. 368 */ 369 #define DK_REMOVABLE_DISK 0x02 /* Removable Disk */ 370 #define DK_MO_ERASABLE 0x03 /* MO Erasable */ 371 #define DK_MO_WRITEONCE 0x04 /* MO Write once */ 372 #define DK_AS_MO 0x05 /* AS MO */ 373 #define DK_CDROM 0x08 /* CDROM */ 374 #define DK_CDR 0x09 /* CD-R */ 375 #define DK_CDRW 0x0A /* CD-RW */ 376 #define DK_DVDROM 0x10 /* DVD-ROM */ 377 #define DK_DVDR 0x11 /* DVD-R */ 378 #define DK_DVDRAM 0x12 /* DVD_RAM or DVD-RW */ 379 380 /* 381 * Media types for other rewritable magnetic media 382 */ 383 #define DK_FIXED_DISK 0x10001 /* Fixed disk SCSI or otherwise */ 384 #define DK_FLOPPY 0x10002 /* Floppy media */ 385 #define DK_ZIP 0x10003 /* IOMEGA ZIP media */ 386 #define DK_JAZ 0x10004 /* IOMEGA JAZ media */ 387 388 #define DKIOCSETEFI (DKIOC|17) /* Set EFI info */ 389 #define DKIOCGETEFI (DKIOC|18) /* Get EFI info */ 390 391 #define DKIOCPARTITION (DKIOC|9) /* Get partition info */ 392 393 /* 394 * Ioctls to get/set volume capabilities related to Logical Volume Managers. 395 * They include the ability to get/set capabilities and to issue a read to a 396 * specific underlying device of a replicated device. 397 */ 398 399 #define DKIOCGETVOLCAP (DKIOC | 25) /* Get volume capabilities */ 400 #define DKIOCSETVOLCAP (DKIOC | 26) /* Set volume capabilities */ 401 #define DKIOCDMR (DKIOC | 27) /* Issue a directed read */ 402 403 #define DKIOCDUMPINIT (DKIOC | 28) /* Dumpify a zvol */ 404 #define DKIOCDUMPFINI (DKIOC | 29) /* Un-Dumpify a zvol */ 405 406 typedef uint_t volcapinfo_t; 407 408 typedef uint_t volcapset_t; 409 410 #define DKV_ABR_CAP 0x00000001 /* Support Appl.Based Recovery */ 411 #define DKV_DMR_CAP 0x00000002 /* Support Directed Mirror Read */ 412 413 typedef struct volcap { 414 volcapinfo_t vc_info; /* Capabilities available */ 415 volcapset_t vc_set; /* Capabilities set */ 416 } volcap_t; 417 418 #define VOL_SIDENAME 256 419 420 typedef struct vol_directed_rd { 421 int vdr_flags; 422 offset_t vdr_offset; 423 size_t vdr_nbytes; 424 size_t vdr_bytesread; 425 void *vdr_data; 426 int vdr_side; 427 char vdr_side_name[VOL_SIDENAME]; 428 } vol_directed_rd_t; 429 430 #define DKV_SIDE_INIT (-1) 431 #define DKV_DMR_NEXT_SIDE 0x00000001 432 #define DKV_DMR_DONE 0x00000002 433 #define DKV_DMR_ERROR 0x00000004 434 #define DKV_DMR_SUCCESS 0x00000008 435 #define DKV_DMR_SHORT 0x00000010 436 437 #ifdef _MULTI_DATAMODEL 438 #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 439 #pragma pack(4) 440 #endif 441 typedef struct vol_directed_rd32 { 442 int32_t vdr_flags; 443 offset_t vdr_offset; /* 64-bit element on 32-bit alignment */ 444 size32_t vdr_nbytes; 445 size32_t vdr_bytesread; 446 caddr32_t vdr_data; 447 int32_t vdr_side; 448 char vdr_side_name[VOL_SIDENAME]; 449 } vol_directed_rd32_t; 450 #if _LONG_LONG_ALIGNMENT == 8 && _LONG_LONG_ALIGNMENT_32 == 4 451 #pragma pack() 452 #endif 453 #endif /* _MULTI_DATAMODEL */ 454 455 /* 456 * The ioctl is used to fetch disk's device type, vendor ID, 457 * model number/product ID, firmware revision and serial number together. 458 * 459 * Currently there are two device types - DKD_ATA_TYPE which means the 460 * disk is driven by cmdk/ata or dad/uata driver, and DKD_SCSI_TYPE 461 * which means the disk is driven by sd/scsi hba driver. 462 */ 463 #define DKIOC_GETDISKID (DKIOC|46) 464 465 /* These two labels are for dkd_dtype of dk_disk_id_t */ 466 #define DKD_ATA_TYPE 0x01 /* ATA disk or legacy mode SATA disk */ 467 #define DKD_SCSI_TYPE 0x02 /* SCSI disk or native mode SATA disk */ 468 469 #define DKD_ATA_MODEL 40 /* model number length */ 470 #define DKD_ATA_FWVER 8 /* firmware revision length */ 471 #define DKD_ATA_SERIAL 20 /* serial number length */ 472 473 #define DKD_SCSI_VENDOR 8 /* vendor ID length */ 474 #define DKD_SCSI_PRODUCT 16 /* product ID length */ 475 #define DKD_SCSI_REVLEVEL 4 /* revision level length */ 476 #define DKD_SCSI_SERIAL 12 /* serial number length */ 477 478 /* 479 * The argument type for DKIOC_GETDISKID ioctl. 480 */ 481 typedef struct dk_disk_id { 482 uint_t dkd_dtype; 483 union { 484 struct { 485 char dkd_amodel[DKD_ATA_MODEL]; /* 40 bytes */ 486 char dkd_afwver[DKD_ATA_FWVER]; /* 8 bytes */ 487 char dkd_aserial[DKD_ATA_SERIAL]; /* 20 bytes */ 488 } ata_disk_id; 489 struct { 490 char dkd_svendor[DKD_SCSI_VENDOR]; /* 8 bytes */ 491 char dkd_sproduct[DKD_SCSI_PRODUCT]; /* 16 bytes */ 492 char dkd_sfwver[DKD_SCSI_REVLEVEL]; /* 4 bytes */ 493 char dkd_sserial[DKD_SCSI_SERIAL]; /* 12 bytes */ 494 } scsi_disk_id; 495 } disk_id; 496 } dk_disk_id_t; 497 498 /* 499 * The ioctl is used to update the firmware of device. 500 */ 501 #define DKIOC_UPDATEFW (DKIOC|47) 502 503 /* The argument type for DKIOC_UPDATEFW ioctl */ 504 typedef struct dk_updatefw { 505 caddr_t dku_ptrbuf; /* pointer to firmware buf */ 506 uint_t dku_size; /* firmware buf length */ 507 uint8_t dku_type; /* firmware update type */ 508 } dk_updatefw_t; 509 510 #ifdef _SYSCALL32 511 typedef struct dk_updatefw_32 { 512 caddr32_t dku_ptrbuf; /* pointer to firmware buf */ 513 uint_t dku_size; /* firmware buf length */ 514 uint8_t dku_type; /* firmware update type */ 515 } dk_updatefw_32_t; 516 #endif /* _SYSCALL32 */ 517 518 /* 519 * firmware update type - temporary or permanent use 520 */ 521 #define FW_TYPE_TEMP 0x0 /* temporary use */ 522 #define FW_TYPE_PERM 0x1 /* permanent use */ 523 524 /* 525 * ioctl to free space (e.g. SCSI UNMAP) off a disk. 526 */ 527 #define DKIOCFREE (DKIOC|50) 528 529 typedef struct dkioc_free_s { 530 uint32_t df_flags; 531 uint32_t df_reserved; /* For easy 64-bit alignment below... */ 532 diskaddr_t df_start; 533 diskaddr_t df_length; 534 } dkioc_free_t; 535 536 #define DF_WAIT_SYNC 0x00000001 /* Wait for full write-out of free. */ 537 538 #ifdef __cplusplus 539 } 540 #endif 541 542 #endif /* _SYS_DKIO_H */ 543