xref: /titanic_50/usr/src/uts/common/io/nxge/nxge_virtual.c (revision 159d09a20817016f09b3ea28d1bdada4a336bb91)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/nxge/nxge_impl.h>
27 #include <sys/nxge/nxge_mac.h>
28 #include <sys/nxge/nxge_hio.h>
29 
30 static void nxge_get_niu_property(dev_info_t *, niu_type_t *);
31 static nxge_status_t nxge_get_mac_addr_properties(p_nxge_t);
32 static nxge_status_t nxge_use_cfg_n2niu_properties(p_nxge_t);
33 static void nxge_use_cfg_neptune_properties(p_nxge_t);
34 static void nxge_use_cfg_dma_config(p_nxge_t);
35 static void nxge_use_cfg_vlan_class_config(p_nxge_t);
36 static void nxge_use_cfg_mac_class_config(p_nxge_t);
37 static void nxge_use_cfg_class_config(p_nxge_t);
38 static void nxge_use_cfg_link_cfg(p_nxge_t);
39 static void nxge_set_hw_dma_config(p_nxge_t);
40 static void nxge_set_hw_vlan_class_config(p_nxge_t);
41 static void nxge_set_hw_mac_class_config(p_nxge_t);
42 static void nxge_set_hw_class_config(p_nxge_t);
43 static nxge_status_t nxge_use_default_dma_config_n2(p_nxge_t);
44 static void nxge_ldgv_setup(p_nxge_ldg_t *, p_nxge_ldv_t *, uint8_t,
45 	uint8_t, int *);
46 static void nxge_init_mmac(p_nxge_t, boolean_t);
47 static void nxge_set_rdc_intr_property(p_nxge_t);
48 
49 uint32_t nxge_use_hw_property = 1;
50 uint32_t nxge_groups_per_port = 2;
51 
52 extern uint32_t nxge_use_partition;
53 extern uint32_t nxge_dma_obp_props_only;
54 
55 extern uint16_t nxge_rcr_timeout;
56 extern uint16_t nxge_rcr_threshold;
57 
58 extern uint_t nxge_rx_intr(void *, void *);
59 extern uint_t nxge_tx_intr(void *, void *);
60 extern uint_t nxge_mif_intr(void *, void *);
61 extern uint_t nxge_mac_intr(void *, void *);
62 extern uint_t nxge_syserr_intr(void *, void *);
63 extern void *nxge_list;
64 
65 #define	NXGE_SHARED_REG_SW_SIM
66 
67 #ifdef NXGE_SHARED_REG_SW_SIM
68 uint64_t global_dev_ctrl = 0;
69 #endif
70 
71 #define	MAX_SIBLINGS	NXGE_MAX_PORTS
72 
73 extern uint32_t nxge_rbr_size;
74 extern uint32_t nxge_rcr_size;
75 extern uint32_t nxge_tx_ring_size;
76 extern uint32_t nxge_rbr_spare_size;
77 
78 extern npi_status_t npi_mac_altaddr_disable(npi_handle_t, uint8_t, uint8_t);
79 
80 static uint8_t p2_tx_fair[2] = {12, 12};
81 static uint8_t p2_tx_equal[2] = {12, 12};
82 static uint8_t p4_tx_fair[4] = {6, 6, 6, 6};
83 static uint8_t p4_tx_equal[4] = {6, 6, 6, 6};
84 static uint8_t p2_rx_fair[2] = {8, 8};
85 static uint8_t p2_rx_equal[2] = {8, 8};
86 static uint8_t p4_rx_fair[4] = {4, 4, 4, 4};
87 static uint8_t p4_rx_equal[4] = {4, 4, 4, 4};
88 
89 static uint8_t p2_rdcgrp_fair[2] = {4, 4};
90 static uint8_t p2_rdcgrp_equal[2] = {4, 4};
91 static uint8_t p4_rdcgrp_fair[4] = {2, 2, 1, 1};
92 static uint8_t p4_rdcgrp_equal[4] = {2, 2, 2, 2};
93 static uint8_t p2_rdcgrp_cls[2] = {1, 1};
94 static uint8_t p4_rdcgrp_cls[4] = {1, 1, 1, 1};
95 
96 static uint8_t rx_4_1G[4] = {4, 4, 4, 4};
97 static uint8_t rx_2_10G[2] = {8, 8};
98 static uint8_t rx_2_10G_2_1G[4] = {6, 6, 2, 2};
99 static uint8_t rx_1_10G_3_1G[4] = {10, 2, 2, 2};
100 static uint8_t rx_1_1G_1_10G_2_1G[4] = {2, 10, 2, 2};
101 
102 static uint8_t tx_4_1G[4] = {6, 6, 6, 6};
103 static uint8_t tx_2_10G[2] = {12, 12};
104 static uint8_t tx_2_10G_2_1G[4] = {10, 10, 2, 2};
105 static uint8_t tx_1_10G_3_1G[4] = {12, 4, 4, 4};
106 static uint8_t tx_1_1G_1_10G_2_1G[4] = {4, 12, 4, 4};
107 
108 typedef enum {
109 	DEFAULT = 0,
110 	EQUAL,
111 	FAIR,
112 	CUSTOM,
113 	CLASSIFY,
114 	L2_CLASSIFY,
115 	L3_DISTRIBUTE,
116 	L3_CLASSIFY,
117 	L3_TCAM,
118 	CONFIG_TOKEN_NONE
119 } config_token_t;
120 
121 static char *token_names[] = {
122 	"default",
123 	"equal",
124 	"fair",
125 	"custom",
126 	"classify",
127 	"l2_classify",
128 	"l3_distribute",
129 	"l3_classify",
130 	"l3_tcam",
131 	"none",
132 };
133 
134 void nxge_virint_regs_dump(p_nxge_t nxgep);
135 
136 void
137 nxge_virint_regs_dump(p_nxge_t nxgep)
138 {
139 	npi_handle_t handle;
140 
141 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_virint_regs_dump"));
142 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
143 	(void) npi_vir_dump_pio_fzc_regs_one(handle);
144 	(void) npi_vir_dump_ldgnum(handle);
145 	(void) npi_vir_dump_ldsv(handle);
146 	(void) npi_vir_dump_imask0(handle);
147 	(void) npi_vir_dump_sid(handle);
148 	(void) npi_mac_dump_regs(handle, nxgep->function_num);
149 	(void) npi_ipp_dump_regs(handle, nxgep->function_num);
150 	(void) npi_fflp_dump_regs(handle);
151 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_virint_regs_dump"));
152 }
153 
154 /*
155  * For now: we hard coded the DMA configurations.
156  *	    and assume for one partition only.
157  *
158  *       OBP. Then OBP will pass this partition's
159  *	 Neptune configurations to fcode to create
160  *	 properties for them.
161  *
162  *	Since Neptune(PCI-E) and NIU (Niagara-2) has
163  *	different bus interfaces, the driver needs
164  *	to know which bus it is connected to.
165  *  	Ravinder suggested: create a device property.
166  *	In partitioning environment, we cannot
167  *	use .conf file (need to check). If conf changes,
168  *	need to reboot the system.
169  *	The following function assumes that we will
170  *	retrieve its properties from a virtualized nexus driver.
171  */
172 
173 nxge_status_t
174 nxge_cntlops(dev_info_t *dip, nxge_ctl_enum_t ctlop, void *arg, void *result)
175 {
176 	nxge_status_t status = NXGE_OK;
177 	int instance;
178 	p_nxge_t nxgep;
179 
180 #ifndef NXGE_SHARED_REG_SW_SIM
181 	npi_handle_t handle;
182 	uint16_t sr16, cr16;
183 #endif
184 	instance = ddi_get_instance(dip);
185 	NXGE_DEBUG_MSG((NULL, VIR_CTL, "Instance %d ", instance));
186 
187 	if (nxge_list == NULL) {
188 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
189 		    "nxge_cntlops: nxge_list null"));
190 		return (NXGE_ERROR);
191 	}
192 	nxgep = (p_nxge_t)ddi_get_soft_state(nxge_list, instance);
193 	if (nxgep == NULL) {
194 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
195 		    "nxge_cntlops: nxgep null"));
196 		return (NXGE_ERROR);
197 	}
198 #ifndef NXGE_SHARED_REG_SW_SIM
199 	handle = nxgep->npi_reg_handle;
200 #endif
201 	switch (ctlop) {
202 	case NXGE_CTLOPS_NIUTYPE:
203 		nxge_get_niu_property(dip, (niu_type_t *)result);
204 		return (status);
205 
206 	case NXGE_CTLOPS_GET_SHARED_REG:
207 #ifdef NXGE_SHARED_REG_SW_SIM
208 		*(uint64_t *)result = global_dev_ctrl;
209 		return (0);
210 #else
211 		status = npi_dev_func_sr_sr_get(handle, &sr16);
212 		*(uint16_t *)result = sr16;
213 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
214 		    "nxge_cntlops: NXGE_CTLOPS_GET_SHARED_REG"));
215 		return (0);
216 #endif
217 
218 	case NXGE_CTLOPS_SET_SHARED_REG_LOCK:
219 #ifdef NXGE_SHARED_REG_SW_SIM
220 		global_dev_ctrl = *(uint64_t *)arg;
221 		return (0);
222 #else
223 		status = NPI_FAILURE;
224 		while (status != NPI_SUCCESS)
225 			status = npi_dev_func_sr_lock_enter(handle);
226 
227 		sr16 = *(uint16_t *)arg;
228 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
229 		status = npi_dev_func_sr_lock_free(handle);
230 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
231 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
232 		return (0);
233 #endif
234 
235 	case NXGE_CTLOPS_UPDATE_SHARED_REG:
236 #ifdef NXGE_SHARED_REG_SW_SIM
237 		global_dev_ctrl |= *(uint64_t *)arg;
238 		return (0);
239 #else
240 		status = NPI_FAILURE;
241 		while (status != NPI_SUCCESS)
242 			status = npi_dev_func_sr_lock_enter(handle);
243 		status = npi_dev_func_sr_sr_get(handle, &sr16);
244 		sr16 |= *(uint16_t *)arg;
245 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
246 		status = npi_dev_func_sr_lock_free(handle);
247 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
248 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
249 		return (0);
250 #endif
251 
252 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG_UL:
253 #ifdef NXGE_SHARED_REG_SW_SIM
254 		global_dev_ctrl |= *(uint64_t *)arg;
255 		return (0);
256 #else
257 		status = npi_dev_func_sr_sr_get(handle, &sr16);
258 		cr16 = *(uint16_t *)arg;
259 		sr16 &= ~cr16;
260 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
261 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
262 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
263 		return (0);
264 #endif
265 
266 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG:
267 #ifdef NXGE_SHARED_REG_SW_SIM
268 		global_dev_ctrl |= *(uint64_t *)arg;
269 		return (0);
270 #else
271 		status = NPI_FAILURE;
272 		while (status != NPI_SUCCESS)
273 			status = npi_dev_func_sr_lock_enter(handle);
274 		status = npi_dev_func_sr_sr_get(handle, &sr16);
275 		cr16 = *(uint16_t *)arg;
276 		sr16 &= ~cr16;
277 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
278 		status = npi_dev_func_sr_lock_free(handle);
279 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
280 		    "nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
281 		return (0);
282 #endif
283 
284 	case NXGE_CTLOPS_GET_LOCK_BLOCK:
285 #ifdef NXGE_SHARED_REG_SW_SIM
286 		global_dev_ctrl |= *(uint64_t *)arg;
287 		return (0);
288 #else
289 		status = NPI_FAILURE;
290 		while (status != NPI_SUCCESS)
291 			status = npi_dev_func_sr_lock_enter(handle);
292 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
293 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_BLOCK"));
294 		return (0);
295 #endif
296 	case NXGE_CTLOPS_GET_LOCK_TRY:
297 #ifdef NXGE_SHARED_REG_SW_SIM
298 		global_dev_ctrl |= *(uint64_t *)arg;
299 		return (0);
300 #else
301 		status = npi_dev_func_sr_lock_enter(handle);
302 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
303 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_TRY"));
304 		if (status == NPI_SUCCESS)
305 			return (NXGE_OK);
306 		else
307 			return (NXGE_ERROR);
308 #endif
309 	case NXGE_CTLOPS_FREE_LOCK:
310 #ifdef NXGE_SHARED_REG_SW_SIM
311 		global_dev_ctrl |= *(uint64_t *)arg;
312 		return (0);
313 #else
314 		status = npi_dev_func_sr_lock_free(handle);
315 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
316 		    "nxge_cntlops: NXGE_CTLOPS_GET_LOCK_FREE"));
317 		if (status == NPI_SUCCESS)
318 			return (NXGE_OK);
319 		else
320 			return (NXGE_ERROR);
321 #endif
322 
323 	default:
324 		status = NXGE_ERROR;
325 	}
326 
327 	return (status);
328 }
329 
330 void
331 nxge_common_lock_get(p_nxge_t nxgep)
332 {
333 	uint32_t status = NPI_FAILURE;
334 	npi_handle_t handle;
335 
336 #if	defined(NXGE_SHARE_REG_SW_SIM)
337 	return;
338 #endif
339 	handle = nxgep->npi_reg_handle;
340 	while (status != NPI_SUCCESS)
341 		status = npi_dev_func_sr_lock_enter(handle);
342 }
343 
344 void
345 nxge_common_lock_free(p_nxge_t nxgep)
346 {
347 	npi_handle_t handle;
348 
349 #if	defined(NXGE_SHARE_REG_SW_SIM)
350 	return;
351 #endif
352 	handle = nxgep->npi_reg_handle;
353 	(void) npi_dev_func_sr_lock_free(handle);
354 }
355 
356 
357 static void
358 nxge_get_niu_property(dev_info_t *dip, niu_type_t *niu_type)
359 {
360 	uchar_t *prop_val;
361 	uint_t prop_len;
362 
363 	*niu_type = NIU_TYPE_NONE;
364 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0,
365 	    "niu-type", (uchar_t **)&prop_val,
366 	    &prop_len) == DDI_PROP_SUCCESS) {
367 		if (strncmp("niu", (caddr_t)prop_val, (size_t)prop_len) == 0) {
368 			*niu_type = N2_NIU;
369 		}
370 		ddi_prop_free(prop_val);
371 	}
372 }
373 
374 static config_token_t
375 nxge_get_config_token(char *prop)
376 {
377 	config_token_t token = DEFAULT;
378 
379 	while (token < CONFIG_TOKEN_NONE) {
380 		if (strncmp(prop, token_names[token], 4) == 0)
381 			break;
382 		token++;
383 	}
384 	return (token);
385 }
386 
387 /* per port */
388 
389 static nxge_status_t
390 nxge_update_rxdma_grp_properties(p_nxge_t nxgep, config_token_t token,
391 	dev_info_t *s_dip[])
392 {
393 	nxge_status_t status = NXGE_OK;
394 	int ddi_status;
395 	int num_ports = nxgep->nports;
396 	int port, bits, j;
397 	uint8_t start_grp = 0, num_grps = 0;
398 	p_nxge_param_t param_arr;
399 	uint32_t grp_bitmap[MAX_SIBLINGS];
400 	int custom_start_grp[MAX_SIBLINGS];
401 	int custom_num_grp[MAX_SIBLINGS];
402 	uint8_t bad_config = B_FALSE;
403 	char *start_prop, *num_prop, *cfg_prop;
404 
405 	start_grp = 0;
406 	param_arr = nxgep->param_arr;
407 	start_prop = param_arr[param_rdc_grps_start].fcode_name;
408 	num_prop = param_arr[param_rx_rdc_grps].fcode_name;
409 
410 	switch (token) {
411 	case FAIR:
412 		cfg_prop = "fair";
413 		for (port = 0; port < num_ports; port++) {
414 			custom_num_grp[port] =
415 			    (num_ports == 4) ?
416 			    p4_rdcgrp_fair[port] :
417 			    p2_rdcgrp_fair[port];
418 			custom_start_grp[port] = start_grp;
419 			start_grp += custom_num_grp[port];
420 		}
421 		break;
422 
423 	case EQUAL:
424 		cfg_prop = "equal";
425 		for (port = 0; port < num_ports; port++) {
426 			custom_num_grp[port] =
427 			    (num_ports == 4) ?
428 			    p4_rdcgrp_equal[port] :
429 			    p2_rdcgrp_equal[port];
430 			custom_start_grp[port] = start_grp;
431 			start_grp += custom_num_grp[port];
432 		}
433 		break;
434 
435 
436 	case CLASSIFY:
437 		cfg_prop = "classify";
438 		for (port = 0; port < num_ports; port++) {
439 			custom_num_grp[port] = (num_ports == 4) ?
440 			    p4_rdcgrp_cls[port] : p2_rdcgrp_cls[port];
441 			custom_start_grp[port] = start_grp;
442 			start_grp += custom_num_grp[port];
443 		}
444 		break;
445 
446 	case CUSTOM:
447 		cfg_prop = "custom";
448 		/* See if it is good config */
449 		num_grps = 0;
450 		for (port = 0; port < num_ports; port++) {
451 			custom_start_grp[port] =
452 			    ddi_prop_get_int(DDI_DEV_T_NONE, s_dip[port],
453 			    DDI_PROP_DONTPASS, start_prop, -1);
454 			if ((custom_start_grp[port] == -1) ||
455 			    (custom_start_grp[port] >=
456 			    NXGE_MAX_RDC_GRPS)) {
457 				bad_config = B_TRUE;
458 				break;
459 			}
460 			custom_num_grp[port] = ddi_prop_get_int(
461 			    DDI_DEV_T_NONE,
462 			    s_dip[port],
463 			    DDI_PROP_DONTPASS,
464 			    num_prop, -1);
465 
466 			if ((custom_num_grp[port] == -1) ||
467 			    (custom_num_grp[port] >
468 			    NXGE_MAX_RDC_GRPS) ||
469 			    ((custom_num_grp[port] +
470 			    custom_start_grp[port]) >=
471 			    NXGE_MAX_RDC_GRPS)) {
472 				bad_config = B_TRUE;
473 				break;
474 			}
475 			num_grps += custom_num_grp[port];
476 			if (num_grps > NXGE_MAX_RDC_GRPS) {
477 				bad_config = B_TRUE;
478 				break;
479 			}
480 			grp_bitmap[port] = 0;
481 			for (bits = 0;
482 			    bits < custom_num_grp[port];
483 			    bits++) {
484 				grp_bitmap[port] |=
485 				    (1 << (bits + custom_start_grp[port]));
486 			}
487 
488 		}
489 
490 		if (bad_config == B_FALSE) {
491 			/* check for overlap */
492 			for (port = 0; port < num_ports - 1; port++) {
493 				for (j = port + 1; j < num_ports; j++) {
494 					if (grp_bitmap[port] &
495 					    grp_bitmap[j]) {
496 						bad_config = B_TRUE;
497 						break;
498 					}
499 				}
500 				if (bad_config == B_TRUE)
501 					break;
502 			}
503 		}
504 		if (bad_config == B_TRUE) {
505 			/* use default config */
506 			for (port = 0; port < num_ports; port++) {
507 				custom_num_grp[port] =
508 				    (num_ports == 4) ?
509 				    p4_rx_fair[port] : p2_rx_fair[port];
510 				custom_start_grp[port] = start_grp;
511 				start_grp += custom_num_grp[port];
512 			}
513 		}
514 		break;
515 
516 	default:
517 		/* use default config */
518 		cfg_prop = "fair";
519 		for (port = 0; port < num_ports; port++) {
520 			custom_num_grp[port] = (num_ports == 4) ?
521 			    p4_rx_fair[port] : p2_rx_fair[port];
522 			custom_start_grp[port] = start_grp;
523 			start_grp += custom_num_grp[port];
524 		}
525 		break;
526 	}
527 
528 	/* Now Update the rx properties */
529 	for (port = 0; port < num_ports; port++) {
530 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
531 		    "rxdma-grp-cfg", cfg_prop);
532 		if (ddi_status != DDI_PROP_SUCCESS) {
533 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
534 			    " property %s not updating",
535 			    cfg_prop));
536 			status |= NXGE_DDI_FAILED;
537 		}
538 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
539 		    num_prop, custom_num_grp[port]);
540 
541 		if (ddi_status != DDI_PROP_SUCCESS) {
542 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
543 			    " property %s not updating",
544 			    num_prop));
545 			status |= NXGE_DDI_FAILED;
546 		}
547 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
548 		    start_prop, custom_start_grp[port]);
549 
550 		if (ddi_status != DDI_PROP_SUCCESS) {
551 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
552 			    " property %s not updating",
553 			    start_prop));
554 			status |= NXGE_DDI_FAILED;
555 		}
556 	}
557 	if (status & NXGE_DDI_FAILED)
558 		status |= NXGE_ERROR;
559 
560 	return (status);
561 }
562 
563 static nxge_status_t
564 nxge_update_rxdma_properties(p_nxge_t nxgep, config_token_t token,
565 	dev_info_t *s_dip[])
566 {
567 	nxge_status_t status = NXGE_OK;
568 	int ddi_status;
569 	int num_ports = nxgep->nports;
570 	int port, bits, j;
571 	uint8_t start_rdc = 0, num_rdc = 0;
572 	p_nxge_param_t param_arr;
573 	uint32_t rdc_bitmap[MAX_SIBLINGS];
574 	int custom_start_rdc[MAX_SIBLINGS];
575 	int custom_num_rdc[MAX_SIBLINGS];
576 	uint8_t bad_config = B_FALSE;
577 	int *prop_val;
578 	uint_t prop_len;
579 	char *start_rdc_prop, *num_rdc_prop, *cfg_prop;
580 
581 	start_rdc = 0;
582 	param_arr = nxgep->param_arr;
583 	start_rdc_prop = param_arr[param_rxdma_channels_begin].fcode_name;
584 	num_rdc_prop = param_arr[param_rxdma_channels].fcode_name;
585 
586 	switch (token) {
587 	case FAIR:
588 		cfg_prop = "fair";
589 		for (port = 0; port < num_ports; port++) {
590 			custom_num_rdc[port] = (num_ports == 4) ?
591 			    p4_rx_fair[port] : p2_rx_fair[port];
592 			custom_start_rdc[port] = start_rdc;
593 			start_rdc += custom_num_rdc[port];
594 		}
595 		break;
596 
597 	case EQUAL:
598 		cfg_prop = "equal";
599 		for (port = 0; port < num_ports; port++) {
600 			custom_num_rdc[port] = (num_ports == 4) ?
601 			    p4_rx_equal[port] :
602 			    p2_rx_equal[port];
603 			custom_start_rdc[port] = start_rdc;
604 			start_rdc += custom_num_rdc[port];
605 		}
606 		break;
607 
608 	case CUSTOM:
609 		cfg_prop = "custom";
610 		/* See if it is good config */
611 		num_rdc = 0;
612 		for (port = 0; port < num_ports; port++) {
613 			ddi_status = ddi_prop_lookup_int_array(
614 			    DDI_DEV_T_ANY,
615 			    s_dip[port], 0,
616 			    start_rdc_prop,
617 			    &prop_val,
618 			    &prop_len);
619 			if (ddi_status == DDI_SUCCESS)
620 				custom_start_rdc[port] = *prop_val;
621 			else {
622 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
623 				    " %s custom start port %d"
624 				    " read failed ",
625 				    " rxdma-cfg", port));
626 				bad_config = B_TRUE;
627 				status |= NXGE_DDI_FAILED;
628 			}
629 			if ((custom_start_rdc[port] == -1) ||
630 			    (custom_start_rdc[port] >=
631 			    NXGE_MAX_RDCS)) {
632 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
633 				    " %s custom start %d"
634 				    " out of range %x ",
635 				    " rxdma-cfg",
636 				    port,
637 				    custom_start_rdc[port]));
638 				bad_config = B_TRUE;
639 				break;
640 			}
641 			ddi_status = ddi_prop_lookup_int_array(
642 			    DDI_DEV_T_ANY,
643 			    s_dip[port],
644 			    0,
645 			    num_rdc_prop,
646 			    &prop_val,
647 			    &prop_len);
648 
649 			if (ddi_status == DDI_SUCCESS)
650 				custom_num_rdc[port] = *prop_val;
651 			else {
652 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
653 				    " %s custom num port %d"
654 				    " read failed ",
655 				    "rxdma-cfg", port));
656 				bad_config = B_TRUE;
657 				status |= NXGE_DDI_FAILED;
658 			}
659 
660 			if ((custom_num_rdc[port] == -1) ||
661 			    (custom_num_rdc[port] >
662 			    NXGE_MAX_RDCS) ||
663 			    ((custom_num_rdc[port] +
664 			    custom_start_rdc[port]) >
665 			    NXGE_MAX_RDCS)) {
666 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
667 				    " %s custom num %d"
668 				    " out of range %x ",
669 				    " rxdma-cfg",
670 				    port, custom_num_rdc[port]));
671 				bad_config = B_TRUE;
672 				break;
673 			}
674 			num_rdc += custom_num_rdc[port];
675 			if (num_rdc > NXGE_MAX_RDCS) {
676 				bad_config = B_TRUE;
677 				break;
678 			}
679 			rdc_bitmap[port] = 0;
680 			for (bits = 0;
681 			    bits < custom_num_rdc[port]; bits++) {
682 				rdc_bitmap[port] |=
683 				    (1 << (bits + custom_start_rdc[port]));
684 			}
685 		}
686 
687 		if (bad_config == B_FALSE) {
688 			/* check for overlap */
689 			for (port = 0; port < num_ports - 1; port++) {
690 				for (j = port + 1; j < num_ports; j++) {
691 					if (rdc_bitmap[port] &
692 					    rdc_bitmap[j]) {
693 						NXGE_DEBUG_MSG((nxgep,
694 						    CFG_CTL,
695 						    " rxdma-cfg"
696 						    " property custom"
697 						    " bit overlap"
698 						    " %d %d ",
699 						    port, j));
700 						bad_config = B_TRUE;
701 						break;
702 					}
703 				}
704 				if (bad_config == B_TRUE)
705 					break;
706 			}
707 		}
708 		if (bad_config == B_TRUE) {
709 			/* use default config */
710 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
711 			    " rxdma-cfg property:"
712 			    " bad custom config:"
713 			    " use default"));
714 			for (port = 0; port < num_ports; port++) {
715 				custom_num_rdc[port] =
716 				    (num_ports == 4) ?
717 				    p4_rx_fair[port] :
718 				    p2_rx_fair[port];
719 				custom_start_rdc[port] = start_rdc;
720 				start_rdc += custom_num_rdc[port];
721 			}
722 		}
723 		break;
724 
725 	default:
726 		/* use default config */
727 		cfg_prop = "fair";
728 		for (port = 0; port < num_ports; port++) {
729 			custom_num_rdc[port] = (num_ports == 4) ?
730 			    p4_rx_fair[port] : p2_rx_fair[port];
731 			custom_start_rdc[port] = start_rdc;
732 			start_rdc += custom_num_rdc[port];
733 		}
734 		break;
735 	}
736 
737 	/* Now Update the rx properties */
738 	for (port = 0; port < num_ports; port++) {
739 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
740 		    " update property rxdma-cfg with %s ", cfg_prop));
741 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
742 		    "rxdma-cfg", cfg_prop);
743 		if (ddi_status != DDI_PROP_SUCCESS) {
744 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
745 			    " property rxdma-cfg is not updating to %s",
746 			    cfg_prop));
747 			status |= NXGE_DDI_FAILED;
748 		}
749 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
750 		    num_rdc_prop, custom_num_rdc[port]));
751 
752 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
753 		    num_rdc_prop, custom_num_rdc[port]);
754 
755 		if (ddi_status != DDI_PROP_SUCCESS) {
756 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
757 			    " property %s not updating with %d",
758 			    num_rdc_prop, custom_num_rdc[port]));
759 			status |= NXGE_DDI_FAILED;
760 		}
761 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
762 		    start_rdc_prop, custom_start_rdc[port]));
763 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
764 		    start_rdc_prop, custom_start_rdc[port]);
765 
766 		if (ddi_status != DDI_PROP_SUCCESS) {
767 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
768 			    " property %s not updating with %d ",
769 			    start_rdc_prop, custom_start_rdc[port]));
770 			status |= NXGE_DDI_FAILED;
771 		}
772 	}
773 	if (status & NXGE_DDI_FAILED)
774 		status |= NXGE_ERROR;
775 	return (status);
776 }
777 
778 static nxge_status_t
779 nxge_update_txdma_properties(p_nxge_t nxgep, config_token_t token,
780 	dev_info_t *s_dip[])
781 {
782 	nxge_status_t status = NXGE_OK;
783 	int ddi_status = DDI_SUCCESS;
784 	int num_ports = nxgep->nports;
785 	int port, bits, j;
786 	uint8_t start_tdc = 0, num_tdc = 0;
787 	p_nxge_param_t param_arr;
788 	uint32_t tdc_bitmap[MAX_SIBLINGS];
789 	int custom_start_tdc[MAX_SIBLINGS];
790 	int custom_num_tdc[MAX_SIBLINGS];
791 	uint8_t bad_config = B_FALSE;
792 	int *prop_val;
793 	uint_t prop_len;
794 	char *start_tdc_prop, *num_tdc_prop, *cfg_prop;
795 
796 	start_tdc = 0;
797 	param_arr = nxgep->param_arr;
798 	start_tdc_prop = param_arr[param_txdma_channels_begin].fcode_name;
799 	num_tdc_prop = param_arr[param_txdma_channels].fcode_name;
800 
801 	switch (token) {
802 	case FAIR:
803 		cfg_prop = "fair";
804 		for (port = 0; port < num_ports; port++) {
805 			custom_num_tdc[port] = (num_ports == 4) ?
806 			    p4_tx_fair[port] : p2_tx_fair[port];
807 			custom_start_tdc[port] = start_tdc;
808 			start_tdc += custom_num_tdc[port];
809 		}
810 		break;
811 
812 	case EQUAL:
813 		cfg_prop = "equal";
814 		for (port = 0; port < num_ports; port++) {
815 			custom_num_tdc[port] = (num_ports == 4) ?
816 			    p4_tx_equal[port] : p2_tx_equal[port];
817 			custom_start_tdc[port] = start_tdc;
818 			start_tdc += custom_num_tdc[port];
819 		}
820 		break;
821 
822 	case CUSTOM:
823 		cfg_prop = "custom";
824 		/* See if it is good config */
825 		num_tdc = 0;
826 		for (port = 0; port < num_ports; port++) {
827 			ddi_status = ddi_prop_lookup_int_array(
828 			    DDI_DEV_T_ANY, s_dip[port], 0, start_tdc_prop,
829 			    &prop_val, &prop_len);
830 			if (ddi_status == DDI_SUCCESS)
831 				custom_start_tdc[port] = *prop_val;
832 			else {
833 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
834 				    " %s custom start port %d"
835 				    " read failed ", " txdma-cfg", port));
836 				bad_config = B_TRUE;
837 				status |= NXGE_DDI_FAILED;
838 			}
839 
840 			if ((custom_start_tdc[port] == -1) ||
841 			    (custom_start_tdc[port] >=
842 			    NXGE_MAX_RDCS)) {
843 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
844 				    " %s custom start %d"
845 				    " out of range %x ", " txdma-cfg",
846 				    port, custom_start_tdc[port]));
847 				bad_config = B_TRUE;
848 				break;
849 			}
850 
851 			ddi_status = ddi_prop_lookup_int_array(
852 			    DDI_DEV_T_ANY, s_dip[port], 0, num_tdc_prop,
853 			    &prop_val, &prop_len);
854 			if (ddi_status == DDI_SUCCESS)
855 				custom_num_tdc[port] = *prop_val;
856 			else {
857 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
858 				    " %s custom num port %d"
859 				    " read failed ", " txdma-cfg", port));
860 				bad_config = B_TRUE;
861 				status |= NXGE_DDI_FAILED;
862 			}
863 
864 			if ((custom_num_tdc[port] == -1) ||
865 			    (custom_num_tdc[port] >
866 			    NXGE_MAX_TDCS) ||
867 			    ((custom_num_tdc[port] +
868 			    custom_start_tdc[port]) >
869 			    NXGE_MAX_TDCS)) {
870 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
871 				    " %s custom num %d"
872 				    " out of range %x ", " rxdma-cfg",
873 				    port, custom_num_tdc[port]));
874 				bad_config = B_TRUE;
875 				break;
876 			}
877 			num_tdc += custom_num_tdc[port];
878 			if (num_tdc > NXGE_MAX_TDCS) {
879 				bad_config = B_TRUE;
880 				break;
881 			}
882 			tdc_bitmap[port] = 0;
883 			for (bits = 0;
884 			    bits < custom_num_tdc[port]; bits++) {
885 				tdc_bitmap[port] |=
886 				    (1 <<
887 				    (bits + custom_start_tdc[port]));
888 			}
889 
890 		}
891 
892 		if (bad_config == B_FALSE) {
893 			/* check for overlap */
894 			for (port = 0; port < num_ports - 1; port++) {
895 				for (j = port + 1; j < num_ports; j++) {
896 					if (tdc_bitmap[port] &
897 					    tdc_bitmap[j]) {
898 						NXGE_DEBUG_MSG((nxgep, CFG_CTL,
899 						    " rxdma-cfg"
900 						    " property custom"
901 						    " bit overlap"
902 						    " %d %d ",
903 						    port, j));
904 						bad_config = B_TRUE;
905 						break;
906 					}
907 				}
908 				if (bad_config == B_TRUE)
909 					break;
910 			}
911 		}
912 		if (bad_config == B_TRUE) {
913 			/* use default config */
914 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
915 			    " txdma-cfg property:"
916 			    " bad custom config:" " use default"));
917 
918 			for (port = 0; port < num_ports; port++) {
919 				custom_num_tdc[port] = (num_ports == 4) ?
920 				    p4_tx_fair[port] : p2_tx_fair[port];
921 				custom_start_tdc[port] = start_tdc;
922 				start_tdc += custom_num_tdc[port];
923 			}
924 		}
925 		break;
926 
927 	default:
928 		/* use default config */
929 		cfg_prop = "fair";
930 		for (port = 0; port < num_ports; port++) {
931 			custom_num_tdc[port] = (num_ports == 4) ?
932 			    p4_tx_fair[port] : p2_tx_fair[port];
933 			custom_start_tdc[port] = start_tdc;
934 			start_tdc += custom_num_tdc[port];
935 		}
936 		break;
937 	}
938 
939 	/* Now Update the tx properties */
940 	for (port = 0; port < num_ports; port++) {
941 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
942 		    " update property txdma-cfg with %s ", cfg_prop));
943 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
944 		    "txdma-cfg", cfg_prop);
945 		if (ddi_status != DDI_PROP_SUCCESS) {
946 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
947 			    " property txdma-cfg is not updating to %s",
948 			    cfg_prop));
949 			status |= NXGE_DDI_FAILED;
950 		}
951 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
952 		    num_tdc_prop, custom_num_tdc[port]));
953 
954 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
955 		    num_tdc_prop, custom_num_tdc[port]);
956 
957 		if (ddi_status != DDI_PROP_SUCCESS) {
958 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
959 			    " property %s not updating with %d",
960 			    num_tdc_prop,
961 			    custom_num_tdc[port]));
962 			status |= NXGE_DDI_FAILED;
963 		}
964 
965 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
966 		    start_tdc_prop, custom_start_tdc[port]));
967 
968 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
969 		    start_tdc_prop, custom_start_tdc[port]);
970 		if (ddi_status != DDI_PROP_SUCCESS) {
971 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
972 			    " property %s not updating with %d ",
973 			    start_tdc_prop, custom_start_tdc[port]));
974 			status |= NXGE_DDI_FAILED;
975 		}
976 	}
977 	if (status & NXGE_DDI_FAILED)
978 		status |= NXGE_ERROR;
979 	return (status);
980 }
981 
982 static nxge_status_t
983 nxge_update_cfg_properties(p_nxge_t nxgep, uint32_t flags,
984 	config_token_t token, dev_info_t *s_dip[])
985 {
986 	nxge_status_t status = NXGE_OK;
987 
988 	switch (flags) {
989 	case COMMON_TXDMA_CFG:
990 		if (nxge_dma_obp_props_only == 0)
991 			status = nxge_update_txdma_properties(nxgep,
992 			    token, s_dip);
993 		break;
994 	case COMMON_RXDMA_CFG:
995 		if (nxge_dma_obp_props_only == 0)
996 			status = nxge_update_rxdma_properties(nxgep,
997 			    token, s_dip);
998 
999 		break;
1000 	case COMMON_RXDMA_GRP_CFG:
1001 		status = nxge_update_rxdma_grp_properties(nxgep,
1002 		    token, s_dip);
1003 		break;
1004 	default:
1005 		return (NXGE_ERROR);
1006 	}
1007 	return (status);
1008 }
1009 
1010 /*
1011  * verify consistence.
1012  * (May require publishing the properties on all the ports.
1013  *
1014  * What if properties are published on function 0 device only?
1015  *
1016  *
1017  * rxdma-cfg, txdma-cfg, rxdma-grp-cfg (required )
1018  * What about class configs?
1019  *
1020  * If consistent, update the property on all the siblings.
1021  * set  a flag on hardware shared register
1022  * The rest of the siblings will check the flag
1023  * if the flag is set, they will use the updated property
1024  * without doing any validation.
1025  */
1026 
1027 nxge_status_t
1028 nxge_cfg_verify_set_classify_prop(p_nxge_t nxgep, char *prop,
1029 	uint64_t known_cfg, uint32_t override, dev_info_t *c_dip[])
1030 {
1031 	nxge_status_t status = NXGE_OK;
1032 	int ddi_status = DDI_SUCCESS;
1033 	int i = 0, found = 0, update_prop = B_TRUE;
1034 	int *cfg_val;
1035 	uint_t new_value, cfg_value[MAX_SIBLINGS];
1036 	uint_t prop_len;
1037 	uint_t known_cfg_value;
1038 
1039 	known_cfg_value = (uint_t)known_cfg;
1040 
1041 	if (override == B_TRUE) {
1042 		new_value = known_cfg_value;
1043 		for (i = 0; i < nxgep->nports; i++) {
1044 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1045 			    c_dip[i], prop, new_value);
1046 #ifdef NXGE_DEBUG_ERROR
1047 			if (ddi_status != DDI_PROP_SUCCESS)
1048 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1049 				    " property %s failed update ", prop));
1050 #endif
1051 		}
1052 		if (ddi_status != DDI_PROP_SUCCESS)
1053 			return (NXGE_ERROR | NXGE_DDI_FAILED);
1054 	}
1055 	for (i = 0; i < nxgep->nports; i++) {
1056 		cfg_value[i] = known_cfg_value;
1057 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, c_dip[i], 0,
1058 		    prop, &cfg_val,
1059 		    &prop_len) == DDI_PROP_SUCCESS) {
1060 			cfg_value[i] = *cfg_val;
1061 			ddi_prop_free(cfg_val);
1062 			found++;
1063 		}
1064 	}
1065 
1066 	if (found != i) {
1067 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1068 		    " property %s not specified on all ports", prop));
1069 		if (found == 0) {
1070 			/* not specified: Use default */
1071 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1072 			    " property %s not specified on any port:"
1073 			    " Using default", prop));
1074 			new_value = known_cfg_value;
1075 		} else {
1076 			/* specified on some */
1077 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1078 			    " property %s not specified"
1079 			    " on some ports: Using default", prop));
1080 			/* ? use p0 value instead ? */
1081 			new_value = known_cfg_value;
1082 		}
1083 	} else {
1084 		/* check type and consistence */
1085 		/* found on all devices */
1086 		for (i = 1; i < found; i++) {
1087 			if (cfg_value[i] != cfg_value[i - 1]) {
1088 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1089 				    " property %s inconsistent:"
1090 				    " Using default", prop));
1091 				new_value = known_cfg_value;
1092 				break;
1093 			}
1094 			/*
1095 			 * Found on all the ports and consistent. Nothing to
1096 			 * do.
1097 			 */
1098 			update_prop = B_FALSE;
1099 		}
1100 	}
1101 
1102 	if (update_prop == B_TRUE) {
1103 		for (i = 0; i < nxgep->nports; i++) {
1104 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1105 			    c_dip[i], prop, new_value);
1106 #ifdef NXGE_DEBUG_ERROR
1107 			if (ddi_status != DDI_SUCCESS)
1108 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1109 				    " property %s not updating with %d"
1110 				    " Using default",
1111 				    prop, new_value));
1112 #endif
1113 			if (ddi_status != DDI_PROP_SUCCESS)
1114 				status |= NXGE_DDI_FAILED;
1115 		}
1116 	}
1117 	if (status & NXGE_DDI_FAILED)
1118 		status |= NXGE_ERROR;
1119 
1120 	return (status);
1121 }
1122 
1123 static uint64_t
1124 nxge_class_get_known_cfg(p_nxge_t nxgep, int class_prop, int rx_quick_cfg)
1125 {
1126 	int start_prop;
1127 	uint64_t cfg_value;
1128 	p_nxge_param_t param_arr;
1129 
1130 	param_arr = nxgep->param_arr;
1131 	cfg_value = param_arr[class_prop].value;
1132 	start_prop = param_h1_init_value;
1133 
1134 	/* update the properties per quick config */
1135 	switch (rx_quick_cfg) {
1136 	case CFG_L3_WEB:
1137 	case CFG_L3_DISTRIBUTE:
1138 		cfg_value = nxge_classify_get_cfg_value(nxgep,
1139 		    rx_quick_cfg, class_prop - start_prop);
1140 		break;
1141 	default:
1142 		cfg_value = param_arr[class_prop].value;
1143 		break;
1144 	}
1145 	return (cfg_value);
1146 }
1147 
1148 static nxge_status_t
1149 nxge_cfg_verify_set_classify(p_nxge_t nxgep, dev_info_t *c_dip[])
1150 {
1151 	nxge_status_t status = NXGE_OK;
1152 	int rx_quick_cfg, class_prop, start_prop, end_prop;
1153 	char *prop_name;
1154 	int override = B_TRUE;
1155 	uint64_t cfg_value;
1156 	p_nxge_param_t param_arr;
1157 
1158 	param_arr = nxgep->param_arr;
1159 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
1160 	start_prop = param_h1_init_value;
1161 	end_prop = param_class_opt_ipv6_sctp;
1162 
1163 	/* update the properties per quick config */
1164 	if (rx_quick_cfg == CFG_NOT_SPECIFIED)
1165 		override = B_FALSE;
1166 
1167 	/*
1168 	 * these parameter affect the classification outcome.
1169 	 * these parameters are used to configure the Flow key and
1170 	 * the TCAM key for each of the IP classes.
1171 	 * Included here are also the H1 and H2 initial values
1172 	 * which affect the distribution as well as final hash value
1173 	 * (hence the offset into RDC table and FCRAM bucket location)
1174 	 *
1175 	 */
1176 	for (class_prop = start_prop; class_prop <= end_prop; class_prop++) {
1177 		prop_name = param_arr[class_prop].fcode_name;
1178 		cfg_value = nxge_class_get_known_cfg(nxgep,
1179 		    class_prop, rx_quick_cfg);
1180 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1181 		    cfg_value, override, c_dip);
1182 	}
1183 
1184 	/*
1185 	 * these properties do not affect the actual classification outcome.
1186 	 * used to enable/disable or tune the fflp hardware
1187 	 *
1188 	 * fcram_access_ratio, tcam_access_ratio, tcam_enable, llc_snap_enable
1189 	 *
1190 	 */
1191 	override = B_FALSE;
1192 	for (class_prop = param_fcram_access_ratio;
1193 	    class_prop <= param_llc_snap_enable; class_prop++) {
1194 		prop_name = param_arr[class_prop].fcode_name;
1195 		cfg_value = param_arr[class_prop].value;
1196 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1197 		    cfg_value, override, c_dip);
1198 	}
1199 
1200 	return (status);
1201 }
1202 
1203 nxge_status_t
1204 nxge_cfg_verify_set(p_nxge_t nxgep, uint32_t flag)
1205 {
1206 	nxge_status_t status = NXGE_OK;
1207 	int i = 0, found = 0;
1208 	int num_siblings;
1209 	dev_info_t *c_dip[MAX_SIBLINGS + 1];
1210 	char *prop_val[MAX_SIBLINGS];
1211 	config_token_t c_token[MAX_SIBLINGS];
1212 	char *prop;
1213 
1214 	if (nxge_dma_obp_props_only)
1215 		return (NXGE_OK);
1216 
1217 	num_siblings = 0;
1218 	c_dip[num_siblings] = ddi_get_child(nxgep->p_dip);
1219 	while (c_dip[num_siblings]) {
1220 		c_dip[num_siblings + 1] =
1221 		    ddi_get_next_sibling(c_dip[num_siblings]);
1222 		num_siblings++;
1223 	}
1224 
1225 	switch (flag) {
1226 	case COMMON_TXDMA_CFG:
1227 		prop = "txdma-cfg";
1228 		break;
1229 	case COMMON_RXDMA_CFG:
1230 		prop = "rxdma-cfg";
1231 		break;
1232 	case COMMON_RXDMA_GRP_CFG:
1233 		prop = "rxdma-grp-cfg";
1234 		break;
1235 	case COMMON_CLASS_CFG:
1236 		status = nxge_cfg_verify_set_classify(nxgep, c_dip);
1237 		return (status);
1238 	default:
1239 		return (NXGE_ERROR);
1240 	}
1241 
1242 	i = 0;
1243 	while (i < num_siblings) {
1244 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, c_dip[i], 0, prop,
1245 		    (char **)&prop_val[i]) == DDI_PROP_SUCCESS) {
1246 			c_token[i] = nxge_get_config_token(prop_val[i]);
1247 			ddi_prop_free(prop_val[i]);
1248 			found++;
1249 		} else
1250 			c_token[i] = CONFIG_TOKEN_NONE;
1251 		i++;
1252 	}
1253 
1254 	if (found != i) {
1255 		if (found == 0) {
1256 			/* not specified: Use default */
1257 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1258 			    " property %s not specified on any port:"
1259 			    " Using default", prop));
1260 
1261 			status = nxge_update_cfg_properties(nxgep,
1262 			    flag, FAIR, c_dip);
1263 			return (status);
1264 		} else {
1265 			/*
1266 			 * if  the convention is to use function 0 device then
1267 			 * populate the other devices with this configuration.
1268 			 *
1269 			 * The other alternative is to use the default config.
1270 			 */
1271 			/* not specified: Use default */
1272 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1273 			    " property %s not specified on some ports:"
1274 			    " Using default", prop));
1275 			status = nxge_update_cfg_properties(nxgep,
1276 			    flag, FAIR, c_dip);
1277 			return (status);
1278 		}
1279 	}
1280 
1281 	/* check type and consistence */
1282 	/* found on all devices */
1283 	for (i = 1; i < found; i++) {
1284 		if (c_token[i] != c_token[i - 1]) {
1285 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1286 			    " property %s inconsistent:"
1287 			    " Using default", prop));
1288 			status = nxge_update_cfg_properties(nxgep,
1289 			    flag, FAIR, c_dip);
1290 			return (status);
1291 		}
1292 	}
1293 
1294 	/*
1295 	 * Found on all the ports check if it is custom configuration. if
1296 	 * custom, then verify consistence
1297 	 *
1298 	 * finally create soft properties
1299 	 */
1300 	status = nxge_update_cfg_properties(nxgep, flag, c_token[0], c_dip);
1301 	return (status);
1302 }
1303 
1304 nxge_status_t
1305 nxge_cfg_verify_set_quick_config(p_nxge_t nxgep)
1306 {
1307 	nxge_status_t status = NXGE_OK;
1308 	int ddi_status = DDI_SUCCESS;
1309 	char *prop_val;
1310 	char *rx_prop;
1311 	char *prop;
1312 	uint32_t cfg_value = CFG_NOT_SPECIFIED;
1313 	p_nxge_param_t param_arr;
1314 
1315 	param_arr = nxgep->param_arr;
1316 	rx_prop = param_arr[param_rx_quick_cfg].fcode_name;
1317 
1318 	prop = "rx-quick-cfg";
1319 
1320 	/*
1321 	 * good value are
1322 	 *
1323 	 * "web-server" "generic-server" "l3-classify" "flow-classify"
1324 	 */
1325 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, nxgep->dip, 0,
1326 	    prop, (char **)&prop_val) != DDI_PROP_SUCCESS) {
1327 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1328 		    " property %s not specified: using default ", prop));
1329 		cfg_value = CFG_NOT_SPECIFIED;
1330 	} else {
1331 		cfg_value = CFG_L3_DISTRIBUTE;
1332 		if (strncmp("web-server", (caddr_t)prop_val, 8) == 0) {
1333 			cfg_value = CFG_L3_WEB;
1334 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1335 			    " %s: web server ", prop));
1336 		}
1337 		if (strncmp("generic-server", (caddr_t)prop_val, 8) == 0) {
1338 			cfg_value = CFG_L3_DISTRIBUTE;
1339 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1340 			    " %s: distribute ", prop));
1341 		}
1342 		/* more */
1343 		ddi_prop_free(prop_val);
1344 	}
1345 
1346 	ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1347 	    rx_prop, cfg_value);
1348 	if (ddi_status != DDI_PROP_SUCCESS)
1349 		status |= NXGE_DDI_FAILED;
1350 
1351 	/* now handle specified cases: */
1352 	if (status & NXGE_DDI_FAILED)
1353 		status |= NXGE_ERROR;
1354 	return (status);
1355 }
1356 
1357 /*
1358  * Device properties adv-autoneg-cap etc are defined by FWARC
1359  * http://sac.sfbay/FWARC/2002/345/20020610_asif.haswarey
1360  */
1361 static void
1362 nxge_use_cfg_link_cfg(p_nxge_t nxgep)
1363 {
1364 	int *prop_val;
1365 	uint_t prop_len;
1366 	dev_info_t *dip;
1367 	int speed;
1368 	int duplex;
1369 	int adv_autoneg_cap;
1370 	int adv_10gfdx_cap;
1371 	int adv_10ghdx_cap;
1372 	int adv_1000fdx_cap;
1373 	int adv_1000hdx_cap;
1374 	int adv_100fdx_cap;
1375 	int adv_100hdx_cap;
1376 	int adv_10fdx_cap;
1377 	int adv_10hdx_cap;
1378 	int status = DDI_SUCCESS;
1379 
1380 	dip = nxgep->dip;
1381 
1382 	/*
1383 	 * first find out the card type and the supported link speeds and
1384 	 * features
1385 	 */
1386 	/* add code for card type */
1387 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-autoneg-cap",
1388 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1389 		ddi_prop_free(prop_val);
1390 		return;
1391 	}
1392 
1393 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10gfdx-cap",
1394 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1395 		ddi_prop_free(prop_val);
1396 		return;
1397 	}
1398 
1399 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000hdx-cap",
1400 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1401 		ddi_prop_free(prop_val);
1402 		return;
1403 	}
1404 
1405 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000fdx-cap",
1406 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1407 		ddi_prop_free(prop_val);
1408 		return;
1409 	}
1410 
1411 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100fdx-cap",
1412 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1413 		ddi_prop_free(prop_val);
1414 		return;
1415 	}
1416 
1417 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100hdx-cap",
1418 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1419 		ddi_prop_free(prop_val);
1420 		return;
1421 	}
1422 
1423 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10fdx-cap",
1424 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1425 		ddi_prop_free(prop_val);
1426 		return;
1427 	}
1428 
1429 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10hdx-cap",
1430 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1431 		ddi_prop_free(prop_val);
1432 		return;
1433 	}
1434 
1435 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "speed",
1436 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1437 		if (strncmp("10000", (caddr_t)prop_val,
1438 		    (size_t)prop_len) == 0) {
1439 			speed = 10000;
1440 		} else if (strncmp("1000", (caddr_t)prop_val,
1441 		    (size_t)prop_len) == 0) {
1442 			speed = 1000;
1443 		} else if (strncmp("100", (caddr_t)prop_val,
1444 		    (size_t)prop_len) == 0) {
1445 			speed = 100;
1446 		} else if (strncmp("10", (caddr_t)prop_val,
1447 		    (size_t)prop_len) == 0) {
1448 			speed = 10;
1449 		} else if (strncmp("auto", (caddr_t)prop_val,
1450 		    (size_t)prop_len) == 0) {
1451 			speed = 0;
1452 		} else {
1453 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1454 			    "speed property is invalid reverting to auto"));
1455 			speed = 0;
1456 		}
1457 		ddi_prop_free(prop_val);
1458 	} else
1459 		speed = 0;
1460 
1461 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "duplex",
1462 	    (uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1463 		if (strncmp("full", (caddr_t)prop_val,
1464 		    (size_t)prop_len) == 0) {
1465 			duplex = 2;
1466 		} else if (strncmp("half", (caddr_t)prop_val,
1467 		    (size_t)prop_len) == 0) {
1468 			duplex = 1;
1469 		} else if (strncmp("auto", (caddr_t)prop_val,
1470 		    (size_t)prop_len) == 0) {
1471 			duplex = 0;
1472 		} else {
1473 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1474 			    "duplex property is invalid"
1475 			    " reverting to auto"));
1476 			duplex = 0;
1477 		}
1478 		ddi_prop_free(prop_val);
1479 	} else
1480 		duplex = 0;
1481 
1482 	/* speed == 0 or duplex == 0 means auto negotiation. */
1483 	adv_autoneg_cap = (speed == 0) || (duplex == 0);
1484 	if (adv_autoneg_cap == 0) {
1485 		adv_10gfdx_cap = ((speed == 10000) && (duplex == 2));
1486 		adv_10ghdx_cap = adv_10gfdx_cap;
1487 		adv_10ghdx_cap |= ((speed == 10000) && (duplex == 1));
1488 		adv_1000fdx_cap = adv_10ghdx_cap;
1489 		adv_1000fdx_cap |= ((speed == 1000) && (duplex == 2));
1490 		adv_1000hdx_cap = adv_1000fdx_cap;
1491 		adv_1000hdx_cap |= ((speed == 1000) && (duplex == 1));
1492 		adv_100fdx_cap = adv_1000hdx_cap;
1493 		adv_100fdx_cap |= ((speed == 100) && (duplex == 2));
1494 		adv_100hdx_cap = adv_100fdx_cap;
1495 		adv_100hdx_cap |= ((speed == 100) && (duplex == 1));
1496 		adv_10fdx_cap = adv_100hdx_cap;
1497 		adv_10fdx_cap |= ((speed == 10) && (duplex == 2));
1498 		adv_10hdx_cap = adv_10fdx_cap;
1499 		adv_10hdx_cap |= ((speed == 10) && (duplex == 1));
1500 	} else if (speed == 0) {
1501 		adv_10gfdx_cap = (duplex == 2);
1502 		adv_10ghdx_cap = (duplex == 1);
1503 		adv_1000fdx_cap = (duplex == 2);
1504 		adv_1000hdx_cap = (duplex == 1);
1505 		adv_100fdx_cap = (duplex == 2);
1506 		adv_100hdx_cap = (duplex == 1);
1507 		adv_10fdx_cap = (duplex == 2);
1508 		adv_10hdx_cap = (duplex == 1);
1509 	}
1510 	if (duplex == 0) {
1511 		adv_10gfdx_cap = (speed == 0);
1512 		adv_10gfdx_cap |= (speed == 10000);
1513 		adv_10ghdx_cap = adv_10gfdx_cap;
1514 		adv_10ghdx_cap |= (speed == 10000);
1515 		adv_1000fdx_cap = adv_10ghdx_cap;
1516 		adv_1000fdx_cap |= (speed == 1000);
1517 		adv_1000hdx_cap = adv_1000fdx_cap;
1518 		adv_1000hdx_cap |= (speed == 1000);
1519 		adv_100fdx_cap = adv_1000hdx_cap;
1520 		adv_100fdx_cap |= (speed == 100);
1521 		adv_100hdx_cap = adv_100fdx_cap;
1522 		adv_100hdx_cap |= (speed == 100);
1523 		adv_10fdx_cap = adv_100hdx_cap;
1524 		adv_10fdx_cap |= (speed == 10);
1525 		adv_10hdx_cap = adv_10fdx_cap;
1526 		adv_10hdx_cap |= (speed == 10);
1527 	}
1528 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1529 	    "adv-autoneg-cap", &adv_autoneg_cap, 1);
1530 	if (status)
1531 		return;
1532 
1533 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1534 	    "adv-10gfdx-cap", &adv_10gfdx_cap, 1);
1535 	if (status)
1536 		goto nxge_map_myargs_to_gmii_fail1;
1537 
1538 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1539 	    "adv-10ghdx-cap", &adv_10ghdx_cap, 1);
1540 	if (status)
1541 		goto nxge_map_myargs_to_gmii_fail2;
1542 
1543 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1544 	    "adv-1000fdx-cap", &adv_1000fdx_cap, 1);
1545 	if (status)
1546 		goto nxge_map_myargs_to_gmii_fail3;
1547 
1548 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1549 	    "adv-1000hdx-cap", &adv_1000hdx_cap, 1);
1550 	if (status)
1551 		goto nxge_map_myargs_to_gmii_fail4;
1552 
1553 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1554 	    "adv-100fdx-cap", &adv_100fdx_cap, 1);
1555 	if (status)
1556 		goto nxge_map_myargs_to_gmii_fail5;
1557 
1558 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1559 	    "adv-100hdx-cap", &adv_100hdx_cap, 1);
1560 	if (status)
1561 		goto nxge_map_myargs_to_gmii_fail6;
1562 
1563 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1564 	    "adv-10fdx-cap", &adv_10fdx_cap, 1);
1565 	if (status)
1566 		goto nxge_map_myargs_to_gmii_fail7;
1567 
1568 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1569 	    "adv-10hdx-cap", &adv_10hdx_cap, 1);
1570 	if (status)
1571 		goto nxge_map_myargs_to_gmii_fail8;
1572 
1573 	return;
1574 
1575 nxge_map_myargs_to_gmii_fail9:
1576 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10hdx-cap");
1577 
1578 nxge_map_myargs_to_gmii_fail8:
1579 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10fdx-cap");
1580 
1581 nxge_map_myargs_to_gmii_fail7:
1582 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100hdx-cap");
1583 
1584 nxge_map_myargs_to_gmii_fail6:
1585 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100fdx-cap");
1586 
1587 nxge_map_myargs_to_gmii_fail5:
1588 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000hdx-cap");
1589 
1590 nxge_map_myargs_to_gmii_fail4:
1591 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000fdx-cap");
1592 
1593 nxge_map_myargs_to_gmii_fail3:
1594 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10ghdx-cap");
1595 
1596 nxge_map_myargs_to_gmii_fail2:
1597 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10gfdx-cap");
1598 
1599 nxge_map_myargs_to_gmii_fail1:
1600 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-autoneg-cap");
1601 }
1602 
1603 nxge_status_t
1604 nxge_get_config_properties(p_nxge_t nxgep)
1605 {
1606 	nxge_status_t status = NXGE_OK;
1607 	p_nxge_hw_list_t hw_p;
1608 
1609 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " ==> nxge_get_config_properties"));
1610 
1611 	if ((hw_p = nxgep->nxge_hw_p) == NULL) {
1612 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1613 		    " nxge_get_config_properties:"
1614 		    " common hardware not set", nxgep->niu_type));
1615 		return (NXGE_ERROR);
1616 	}
1617 
1618 	/*
1619 	 * Get info on how many ports Neptune card has.
1620 	 */
1621 	nxgep->nports = nxge_get_nports(nxgep);
1622 	if (nxgep->nports <= 0) {
1623 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1624 		    "<==nxge_get_config_properties: Invalid Neptune type 0x%x",
1625 		    nxgep->niu_type));
1626 		return (NXGE_ERROR);
1627 	}
1628 	nxgep->classifier.tcam_size = TCAM_NIU_TCAM_MAX_ENTRY;
1629 	if (NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1630 		nxgep->classifier.tcam_size = TCAM_NXGE_TCAM_MAX_ENTRY;
1631 	}
1632 	if (nxgep->function_num >= nxgep->nports) {
1633 		return (NXGE_ERROR);
1634 	}
1635 
1636 	status = nxge_get_mac_addr_properties(nxgep);
1637 	if (status != NXGE_OK)
1638 		return (NXGE_ERROR);
1639 
1640 	/*
1641 	 * read the configuration type. If none is specified, used default.
1642 	 * Config types: equal: (default) DMA channels, RDC groups, TCAM, FCRAM
1643 	 * are shared equally across all the ports.
1644 	 *
1645 	 * Fair: DMA channels, RDC groups, TCAM, FCRAM are shared proportional
1646 	 * to the port speed.
1647 	 *
1648 	 *
1649 	 * custom: DMA channels, RDC groups, TCAM, FCRAM partition is
1650 	 * specified in nxge.conf. Need to read each parameter and set
1651 	 * up the parameters in nxge structures.
1652 	 *
1653 	 */
1654 	switch (nxgep->niu_type) {
1655 	case N2_NIU:
1656 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1657 		    " ==> nxge_get_config_properties: N2"));
1658 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1659 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1660 		    COMMON_CFG_VALID) {
1661 			status = nxge_cfg_verify_set(nxgep,
1662 			    COMMON_RXDMA_GRP_CFG);
1663 			status = nxge_cfg_verify_set(nxgep,
1664 			    COMMON_CLASS_CFG);
1665 			hw_p->flags |= COMMON_CFG_VALID;
1666 		}
1667 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1668 		status = nxge_use_cfg_n2niu_properties(nxgep);
1669 		break;
1670 	default:
1671 		if (!NXGE_IS_VALID_NEPTUNE_TYPE(nxgep)) {
1672 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1673 			    " nxge_get_config_properties:"
1674 			    " unknown NIU type 0x%x", nxgep->niu_type));
1675 			return (NXGE_ERROR);
1676 		}
1677 
1678 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1679 		    " ==> nxge_get_config_properties: Neptune"));
1680 		status = nxge_cfg_verify_set_quick_config(nxgep);
1681 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1682 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1683 		    COMMON_CFG_VALID) {
1684 			status = nxge_cfg_verify_set(nxgep,
1685 			    COMMON_TXDMA_CFG);
1686 			status = nxge_cfg_verify_set(nxgep,
1687 			    COMMON_RXDMA_CFG);
1688 			status = nxge_cfg_verify_set(nxgep,
1689 			    COMMON_RXDMA_GRP_CFG);
1690 			status = nxge_cfg_verify_set(nxgep,
1691 			    COMMON_CLASS_CFG);
1692 			hw_p->flags |= COMMON_CFG_VALID;
1693 		}
1694 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1695 		nxge_use_cfg_neptune_properties(nxgep);
1696 		status = NXGE_OK;
1697 		break;
1698 	}
1699 
1700 	/*
1701 	 * Get the software LSO enable flag property from the
1702 	 * driver configuration file (nxge.conf).
1703 	 * This flag will be set to disable (0) if this property
1704 	 * does not exist.
1705 	 */
1706 	nxgep->soft_lso_enable = ddi_prop_get_int(DDI_DEV_T_ANY, nxgep->dip,
1707 	    DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, "soft-lso-enable", 0);
1708 	NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1709 	    "nxge_get_config_properties: software lso %d\n",
1710 	    nxgep->soft_lso_enable));
1711 
1712 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " <== nxge_get_config_properties"));
1713 	return (status);
1714 }
1715 
1716 static nxge_status_t
1717 nxge_use_cfg_n2niu_properties(p_nxge_t nxgep)
1718 {
1719 	nxge_status_t status = NXGE_OK;
1720 
1721 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_n2niu_properties"));
1722 
1723 	status = nxge_use_default_dma_config_n2(nxgep);
1724 	if (status != NXGE_OK) {
1725 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1726 		    " ==> nxge_use_cfg_n2niu_properties (err 0x%x)",
1727 		    status));
1728 		return (status | NXGE_ERROR);
1729 	}
1730 
1731 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1732 	(void) nxge_use_cfg_mac_class_config(nxgep);
1733 	(void) nxge_use_cfg_class_config(nxgep);
1734 	(void) nxge_use_cfg_link_cfg(nxgep);
1735 
1736 	/*
1737 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1738 	 * each property.
1739 	 */
1740 	(void) nxge_get_param_soft_properties(nxgep);
1741 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_n2niu_properties"));
1742 
1743 	return (status);
1744 }
1745 
1746 static void
1747 nxge_use_cfg_neptune_properties(p_nxge_t nxgep)
1748 {
1749 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_neptune_properties"));
1750 
1751 	(void) nxge_use_cfg_dma_config(nxgep);
1752 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1753 	(void) nxge_use_cfg_mac_class_config(nxgep);
1754 	(void) nxge_use_cfg_class_config(nxgep);
1755 	(void) nxge_use_cfg_link_cfg(nxgep);
1756 
1757 	/*
1758 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1759 	 * each property.
1760 	 */
1761 	(void) nxge_get_param_soft_properties(nxgep);
1762 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_neptune_properties"));
1763 }
1764 
1765 /*
1766  * FWARC 2006/556
1767  */
1768 
1769 static nxge_status_t
1770 nxge_use_default_dma_config_n2(p_nxge_t nxgep)
1771 {
1772 	int ndmas;
1773 	uint8_t func;
1774 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
1775 	p_nxge_hw_pt_cfg_t p_cfgp;
1776 	int *prop_val;
1777 	uint_t prop_len;
1778 	int i;
1779 	nxge_status_t status = NXGE_OK;
1780 
1781 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2"));
1782 
1783 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1784 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1785 
1786 	func = nxgep->function_num;
1787 	p_cfgp->function_number = func;
1788 	ndmas = NXGE_TDMA_PER_NIU_PORT;
1789 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1790 	    "tx-dma-channels", (int **)&prop_val,
1791 	    &prop_len) == DDI_PROP_SUCCESS) {
1792 		p_cfgp->tdc.start = prop_val[0];
1793 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1794 		    "==> nxge_use_default_dma_config_n2: tdc starts %d "
1795 		    "(#%d)", p_cfgp->tdc.start, prop_len));
1796 
1797 		ndmas = prop_val[1];
1798 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1799 		    "==> nxge_use_default_dma_config_n2: #tdc %d (#%d)",
1800 		    ndmas, prop_len));
1801 		ddi_prop_free(prop_val);
1802 	} else {
1803 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1804 		    "==> nxge_use_default_dma_config_n2: "
1805 		    "get tx-dma-channels failed"));
1806 		return (NXGE_DDI_FAILED);
1807 	}
1808 
1809 	p_cfgp->tdc.count = nxgep->max_tdcs = ndmas;
1810 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
1811 
1812 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1813 	    "p_cfgp 0x%llx max_tdcs %d nxgep->max_tdcs %d start %d",
1814 	    p_cfgp, p_cfgp->tdc.count, nxgep->max_tdcs, p_cfgp->tdc.start));
1815 
1816 	/* Receive DMA */
1817 	ndmas = NXGE_RDMA_PER_NIU_PORT;
1818 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1819 	    "rx-dma-channels", (int **)&prop_val,
1820 	    &prop_len) == DDI_PROP_SUCCESS) {
1821 		p_cfgp->start_rdc = prop_val[0];
1822 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1823 		    "==> nxge_use_default_dma_config_n2(obp): rdc start %d"
1824 		    " (#%d)", p_cfgp->start_rdc, prop_len));
1825 		ndmas = prop_val[1];
1826 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1827 		    "==> nxge_use_default_dma_config_n2(obp):#rdc %d (#%d)",
1828 		    ndmas, prop_len));
1829 		ddi_prop_free(prop_val);
1830 	} else {
1831 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1832 		    "==> nxge_use_default_dma_config_n2: "
1833 		    "get rx-dma-channel failed"));
1834 		return (NXGE_DDI_FAILED);
1835 	}
1836 
1837 	p_cfgp->max_rdcs = nxgep->max_rdcs = ndmas;
1838 	nxgep->rdc_mask = (ndmas - 1);
1839 
1840 	/* Hypervisor: rdc # and group # use the same # !! */
1841 	p_cfgp->max_grpids = p_cfgp->max_rdcs + p_cfgp->tdc.owned;
1842 	p_cfgp->start_grpid = 0;
1843 	p_cfgp->mif_ldvid = p_cfgp->mac_ldvid = p_cfgp->ser_ldvid = 0;
1844 
1845 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1846 	    "interrupts", (int **)&prop_val,
1847 	    &prop_len) == DDI_PROP_SUCCESS) {
1848 		/*
1849 		 * For each device assigned, the content of each interrupts
1850 		 * property is its logical device group.
1851 		 *
1852 		 * Assignment of interrupts property is in the the following
1853 		 * order:
1854 		 *
1855 		 * MAC MIF (if configured) SYSTEM ERROR (if configured) first
1856 		 * receive channel next channel...... last receive channel
1857 		 * first transmit channel next channel...... last transmit
1858 		 * channel
1859 		 *
1860 		 * prop_len should be at least for one mac and total # of rx and
1861 		 * tx channels. Function 0 owns MIF and ERROR
1862 		 */
1863 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1864 		    "==> nxge_use_default_dma_config_n2(obp): "
1865 		    "# interrupts %d", prop_len));
1866 
1867 		switch (func) {
1868 		case 0:
1869 			p_cfgp->ldg_chn_start = 3;
1870 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT0;
1871 			p_cfgp->mif_ldvid = NXGE_MIF_LD;
1872 			p_cfgp->ser_ldvid = NXGE_SYS_ERROR_LD;
1873 
1874 			break;
1875 		case 1:
1876 			p_cfgp->ldg_chn_start = 1;
1877 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT1;
1878 
1879 			break;
1880 		default:
1881 			status = NXGE_DDI_FAILED;
1882 			break;
1883 		}
1884 
1885 		if (status != NXGE_OK)
1886 			return (status);
1887 
1888 		for (i = 0; i < prop_len; i++) {
1889 			p_cfgp->ldg[i] = prop_val[i];
1890 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1891 			    "==> nxge_use_default_dma_config_n2(obp): "
1892 			    "F%d: interrupt #%d, ldg %d",
1893 			    nxgep->function_num, i, p_cfgp->ldg[i]));
1894 		}
1895 
1896 		p_cfgp->max_grpids = prop_len;
1897 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1898 		    "==> nxge_use_default_dma_config_n2(obp): %d "
1899 		    "(#%d) maxgrpids %d channel starts %d",
1900 		    p_cfgp->mac_ldvid, i, p_cfgp->max_grpids,
1901 		    p_cfgp->ldg_chn_start));
1902 		ddi_prop_free(prop_val);
1903 	} else {
1904 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1905 		    "==> nxge_use_default_dma_config_n2: "
1906 		    "get interrupts failed"));
1907 		return (NXGE_DDI_FAILED);
1908 	}
1909 
1910 	p_cfgp->max_ldgs = p_cfgp->max_grpids;
1911 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1912 	    "==> nxge_use_default_dma_config_n2: "
1913 	    "p_cfgp 0x%llx max_rdcs %d nxgep->max_rdcs %d max_grpids %d"
1914 	    "start_grpid %d macid %d mifid %d serrid %d",
1915 	    p_cfgp, p_cfgp->max_rdcs, nxgep->max_rdcs, p_cfgp->max_grpids,
1916 	    p_cfgp->start_grpid,
1917 	    p_cfgp->mac_ldvid, p_cfgp->mif_ldvid, p_cfgp->ser_ldvid));
1918 
1919 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1920 	    "p_cfgp p%p start_ldg %d nxgep->max_ldgs %d",
1921 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs));
1922 
1923 	/*
1924 	 * RDC groups and the beginning RDC group assigned to this function.
1925 	 */
1926 	p_cfgp->max_rdc_grpids = 1;
1927 	p_cfgp->def_mac_rxdma_grpid = (nxgep->function_num * 1);
1928 
1929 	if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind
1930 	    (nxgep, p_cfgp->def_mac_rxdma_grpid, B_TRUE))
1931 	    >= NXGE_MAX_RDC_GRPS) {
1932 		NXGE_ERROR_MSG((nxgep, CFG_CTL,
1933 		    "nxge_use_default_dma_config_n2(): "
1934 		    "nxge_fzc_rdc_tbl_bind failed"));
1935 		return (NXGE_DDI_FAILED);
1936 	}
1937 
1938 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1939 	    "rx-rdc-grps", p_cfgp->max_rdc_grpids);
1940 	if (status) {
1941 		return (NXGE_DDI_FAILED);
1942 	}
1943 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1944 	    "rx-rdc-grps-begin", p_cfgp->def_mac_rxdma_grpid);
1945 	if (status) {
1946 		(void) ddi_prop_remove(DDI_DEV_T_NONE, nxgep->dip,
1947 		    "rx-rdc-grps");
1948 		return (NXGE_DDI_FAILED);
1949 	}
1950 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1951 	    "p_cfgp $%p # rdc groups %d start rdc group id %d",
1952 	    p_cfgp, p_cfgp->max_rdc_grpids,
1953 	    p_cfgp->def_mac_rxdma_grpid));
1954 
1955 	nxge_set_hw_dma_config(nxgep);
1956 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "<== nxge_use_default_dma_config_n2"));
1957 	return (status);
1958 }
1959 
1960 static void
1961 nxge_use_cfg_dma_config(p_nxge_t nxgep)
1962 {
1963 	int tx_ndmas, rx_ndmas, nrxgp, st_txdma, st_rxdma;
1964 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
1965 	p_nxge_hw_pt_cfg_t p_cfgp;
1966 	dev_info_t *dip;
1967 	p_nxge_param_t param_arr;
1968 	char *prop;
1969 	int *prop_val;
1970 	uint_t prop_len;
1971 	int i;
1972 	uint8_t *ch_arr_p;
1973 
1974 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_dma_config"));
1975 	param_arr = nxgep->param_arr;
1976 
1977 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1978 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1979 	dip = nxgep->dip;
1980 	p_cfgp->function_number = nxgep->function_num;
1981 	prop = param_arr[param_txdma_channels_begin].fcode_name;
1982 
1983 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
1984 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1985 		p_cfgp->tdc.start = *prop_val;
1986 		ddi_prop_free(prop_val);
1987 	} else {
1988 		switch (nxgep->niu_type) {
1989 		case NEPTUNE_4_1GC:
1990 			ch_arr_p = &tx_4_1G[0];
1991 			break;
1992 		case NEPTUNE_2_10GF:
1993 			ch_arr_p = &tx_2_10G[0];
1994 			break;
1995 		case NEPTUNE_2_10GF_2_1GC:
1996 		case NEPTUNE_2_10GF_2_1GRF:
1997 			ch_arr_p = &tx_2_10G_2_1G[0];
1998 			break;
1999 		case NEPTUNE_1_10GF_3_1GC:
2000 			ch_arr_p = &tx_1_10G_3_1G[0];
2001 			break;
2002 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2003 			ch_arr_p = &tx_1_1G_1_10G_2_1G[0];
2004 			break;
2005 		default:
2006 			switch (nxgep->platform_type) {
2007 			case P_NEPTUNE_ALONSO:
2008 				ch_arr_p = &tx_2_10G_2_1G[0];
2009 				break;
2010 			default:
2011 				ch_arr_p = &p4_tx_equal[0];
2012 				break;
2013 			}
2014 			break;
2015 		}
2016 		st_txdma = 0;
2017 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2018 			st_txdma += *ch_arr_p;
2019 
2020 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2021 		    prop, st_txdma);
2022 		p_cfgp->tdc.start = st_txdma;
2023 	}
2024 
2025 	prop = param_arr[param_txdma_channels].fcode_name;
2026 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2027 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2028 		tx_ndmas = *prop_val;
2029 		ddi_prop_free(prop_val);
2030 	} else {
2031 		switch (nxgep->niu_type) {
2032 		case NEPTUNE_4_1GC:
2033 			tx_ndmas = tx_4_1G[nxgep->function_num];
2034 			break;
2035 		case NEPTUNE_2_10GF:
2036 			tx_ndmas = tx_2_10G[nxgep->function_num];
2037 			break;
2038 		case NEPTUNE_2_10GF_2_1GC:
2039 		case NEPTUNE_2_10GF_2_1GRF:
2040 			tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2041 			break;
2042 		case NEPTUNE_1_10GF_3_1GC:
2043 			tx_ndmas = tx_1_10G_3_1G[nxgep->function_num];
2044 			break;
2045 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2046 			tx_ndmas = tx_1_1G_1_10G_2_1G[nxgep->function_num];
2047 			break;
2048 		default:
2049 			switch (nxgep->platform_type) {
2050 			case P_NEPTUNE_ALONSO:
2051 				tx_ndmas = tx_2_10G_2_1G[nxgep->function_num];
2052 				break;
2053 			default:
2054 				tx_ndmas = p4_tx_equal[nxgep->function_num];
2055 				break;
2056 			}
2057 			break;
2058 		}
2059 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2060 		    prop, tx_ndmas);
2061 	}
2062 
2063 	p_cfgp->tdc.count = nxgep->max_tdcs = tx_ndmas;
2064 	p_cfgp->tdc.owned = p_cfgp->tdc.count;
2065 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2066 	    "p_cfgp 0x%llx max_tdcs %d nxgep->max_tdcs %d",
2067 	    p_cfgp, p_cfgp->tdc.count, nxgep->max_tdcs));
2068 
2069 	prop = param_arr[param_rxdma_channels_begin].fcode_name;
2070 
2071 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2072 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2073 		p_cfgp->start_rdc = *prop_val;
2074 		ddi_prop_free(prop_val);
2075 	} else {
2076 		switch (nxgep->niu_type) {
2077 		case NEPTUNE_4_1GC:
2078 			ch_arr_p = &rx_4_1G[0];
2079 			break;
2080 		case NEPTUNE_2_10GF:
2081 			ch_arr_p = &rx_2_10G[0];
2082 			break;
2083 		case NEPTUNE_2_10GF_2_1GC:
2084 		case NEPTUNE_2_10GF_2_1GRF:
2085 			ch_arr_p = &rx_2_10G_2_1G[0];
2086 			break;
2087 		case NEPTUNE_1_10GF_3_1GC:
2088 			ch_arr_p = &rx_1_10G_3_1G[0];
2089 			break;
2090 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2091 			ch_arr_p = &rx_1_1G_1_10G_2_1G[0];
2092 			break;
2093 		default:
2094 			switch (nxgep->platform_type) {
2095 			case P_NEPTUNE_ALONSO:
2096 				ch_arr_p = &rx_2_10G_2_1G[0];
2097 				break;
2098 			default:
2099 				ch_arr_p = &p4_rx_equal[0];
2100 				break;
2101 			}
2102 			break;
2103 		}
2104 		st_rxdma = 0;
2105 		for (i = 0; i < nxgep->function_num; i++, ch_arr_p++)
2106 			st_rxdma += *ch_arr_p;
2107 
2108 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2109 		    prop, st_rxdma);
2110 		p_cfgp->start_rdc = st_rxdma;
2111 	}
2112 
2113 	prop = param_arr[param_rxdma_channels].fcode_name;
2114 
2115 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2116 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2117 		rx_ndmas = *prop_val;
2118 		ddi_prop_free(prop_val);
2119 	} else {
2120 		switch (nxgep->niu_type) {
2121 		case NEPTUNE_4_1GC:
2122 			rx_ndmas = rx_4_1G[nxgep->function_num];
2123 			break;
2124 		case NEPTUNE_2_10GF:
2125 			rx_ndmas = rx_2_10G[nxgep->function_num];
2126 			break;
2127 		case NEPTUNE_2_10GF_2_1GC:
2128 		case NEPTUNE_2_10GF_2_1GRF:
2129 			rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2130 			break;
2131 		case NEPTUNE_1_10GF_3_1GC:
2132 			rx_ndmas = rx_1_10G_3_1G[nxgep->function_num];
2133 			break;
2134 		case NEPTUNE_1_1GC_1_10GF_2_1GC:
2135 			rx_ndmas = rx_1_1G_1_10G_2_1G[nxgep->function_num];
2136 			break;
2137 		default:
2138 			switch (nxgep->platform_type) {
2139 			case P_NEPTUNE_ALONSO:
2140 				rx_ndmas = rx_2_10G_2_1G[nxgep->function_num];
2141 				break;
2142 			default:
2143 				rx_ndmas = p4_rx_equal[nxgep->function_num];
2144 				break;
2145 			}
2146 			break;
2147 		}
2148 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2149 		    prop, rx_ndmas);
2150 	}
2151 
2152 	p_cfgp->max_rdcs = nxgep->max_rdcs = rx_ndmas;
2153 
2154 	prop = param_arr[param_rdc_grps_start].fcode_name;
2155 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2156 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2157 		p_cfgp->def_mac_rxdma_grpid = *prop_val;
2158 		ddi_prop_free(prop_val);
2159 		if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind
2160 		    (nxgep, p_cfgp->def_mac_rxdma_grpid, B_TRUE))
2161 		    >= NXGE_MAX_RDC_GRPS) {
2162 			NXGE_ERROR_MSG((nxgep, CFG_CTL,
2163 			    "nxge_use_cfg_dma_config(): "
2164 			    "nxge_fzc_rdc_tbl_bind failed"));
2165 			cmn_err(CE_CONT, "nxge%d: group not available!\n",
2166 			    nxgep->instance);
2167 			goto nxge_use_cfg_dma_config_exit;
2168 		}
2169 
2170 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2171 		    "==> nxge_use_default_dma_config: "
2172 		    "use property " "start_grpid %d ",
2173 		    p_cfgp->start_grpid));
2174 	} else {
2175 		p_cfgp->def_mac_rxdma_grpid = nxgep->function_num;
2176 		if ((p_cfgp->def_mac_rxdma_grpid = nxge_fzc_rdc_tbl_bind(
2177 		    nxgep, p_cfgp->def_mac_rxdma_grpid, B_TRUE)) >=
2178 		    NXGE_MAX_RDC_GRPS) {
2179 			cmn_err(CE_CONT, "nxge%d: group not available!\n",
2180 			    nxgep->instance);
2181 			goto nxge_use_cfg_dma_config_exit;
2182 		}
2183 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2184 		    prop, p_cfgp->def_mac_rxdma_grpid);
2185 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2186 		    "==> nxge_use_default_dma_config: "
2187 		    "use default "
2188 		    "start_grpid %d (same as function #)",
2189 		    p_cfgp->start_grpid));
2190 	}
2191 
2192 	prop = param_arr[param_rx_rdc_grps].fcode_name;
2193 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2194 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2195 		nrxgp = *prop_val;
2196 		ddi_prop_free(prop_val);
2197 	} else {
2198 		nrxgp = 1;
2199 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2200 		    prop, nrxgp);
2201 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2202 		    "==> nxge_use_default_dma_config: "
2203 		    "num_rdc_grpid not found: use def:# of "
2204 		    "rdc groups %d\n", nrxgp));
2205 	}
2206 
2207 	p_cfgp->max_rdc_grpids = nrxgp;
2208 
2209 	/*
2210 	 * 2/4 ports have the same hard-wired logical groups assigned.
2211 	 */
2212 	p_cfgp->start_ldg = nxgep->function_num * NXGE_LDGRP_PER_4PORTS;
2213 	p_cfgp->max_ldgs = NXGE_LDGRP_PER_4PORTS;
2214 
2215 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_default_dma_config: "
2216 	    "p_cfgp 0x%llx max_rdcs %d nxgep->max_rdcs %d max_grpids %d"
2217 	    "start_grpid %d",
2218 	    p_cfgp, p_cfgp->max_rdcs, nxgep->max_rdcs, p_cfgp->max_grpids,
2219 	    p_cfgp->start_grpid));
2220 
2221 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2222 	    "p_cfgp 0x%016llx start_ldg %d nxgep->max_ldgs %d "
2223 	    "def_mac_rxdma_grpid %d",
2224 	    p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs,
2225 	    p_cfgp->def_mac_rxdma_grpid));
2226 
2227 	prop = param_arr[param_rxdma_intr_time].fcode_name;
2228 
2229 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2230 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2231 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2232 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2233 			    nxgep->dip, prop, prop_val, prop_len);
2234 		}
2235 		ddi_prop_free(prop_val);
2236 	}
2237 	prop = param_arr[param_rxdma_intr_pkts].fcode_name;
2238 
2239 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2240 	    &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2241 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2242 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2243 			    nxgep->dip, prop, prop_val, prop_len);
2244 		}
2245 		ddi_prop_free(prop_val);
2246 	}
2247 	nxge_set_hw_dma_config(nxgep);
2248 
2249 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config: "
2250 	    "sTDC[%d] nTDC[%d] sRDC[%d] nRDC[%d]",
2251 	    p_cfgp->tdc.start, p_cfgp->tdc.count,
2252 	    p_cfgp->start_rdc, p_cfgp->max_rdcs));
2253 
2254 nxge_use_cfg_dma_config_exit:
2255 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config"));
2256 }
2257 
2258 void
2259 nxge_get_logical_props(p_nxge_t nxgep)
2260 {
2261 	nxge_dma_pt_cfg_t *port = &nxgep->pt_config;
2262 	nxge_hw_pt_cfg_t *hardware;
2263 	nxge_rdc_grp_t *group;
2264 
2265 	(void) memset(port, 0, sizeof (*port));
2266 
2267 	port->mac_port = 0;	/* := function number */
2268 
2269 	/*
2270 	 * alloc_buf_size:
2271 	 * dead variables.
2272 	 */
2273 	port->rbr_size = nxge_rbr_size;
2274 	port->rcr_size = nxge_rcr_size;
2275 
2276 	port->tx_dma_map = 0;	/* Transmit DMA channel bit map */
2277 
2278 	nxge_set_rdc_intr_property(nxgep);
2279 
2280 	port->rcr_full_header = NXGE_RCR_FULL_HEADER;
2281 	port->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2282 
2283 	/* ----------------------------------------------------- */
2284 	hardware = &port->hw_config;
2285 
2286 	(void) memset(hardware, 0, sizeof (*hardware));
2287 
2288 	/*
2289 	 * partition_id, read_write_mode:
2290 	 * dead variables.
2291 	 */
2292 
2293 	/*
2294 	 * drr_wt, rx_full_header, *_ldg?, start_mac_entry,
2295 	 * mac_pref, def_mac_rxdma_grpid, start_vlan, max_vlans,
2296 	 * start_ldgs, max_ldgs, max_ldvs,
2297 	 * vlan_pref, def_vlan_rxdma_grpid are meaningful only
2298 	 * in the service domain.
2299 	 */
2300 
2301 	group = &port->rdc_grps[0];
2302 
2303 	group->flag = 1;	/* configured */
2304 	group->config_method = RDC_TABLE_ENTRY_METHOD_REP;
2305 
2306 	/* HIO futures: this is still an open question. */
2307 	hardware->max_macs = 1;
2308 }
2309 
2310 static void
2311 nxge_use_cfg_vlan_class_config(p_nxge_t nxgep)
2312 {
2313 	uint_t vlan_cnt;
2314 	int *vlan_cfg_val;
2315 	int status;
2316 	p_nxge_param_t param_arr;
2317 	char *prop;
2318 
2319 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_vlan_config"));
2320 	param_arr = nxgep->param_arr;
2321 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2322 
2323 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2324 	    &vlan_cfg_val, &vlan_cnt);
2325 	if (status == DDI_PROP_SUCCESS) {
2326 		status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2327 		    nxgep->dip, prop, vlan_cfg_val, vlan_cnt);
2328 		ddi_prop_free(vlan_cfg_val);
2329 	}
2330 	nxge_set_hw_vlan_class_config(nxgep);
2331 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_vlan_config"));
2332 }
2333 
2334 static void
2335 nxge_use_cfg_mac_class_config(p_nxge_t nxgep)
2336 {
2337 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2338 	p_nxge_hw_pt_cfg_t p_cfgp;
2339 	uint_t mac_cnt;
2340 	int *mac_cfg_val;
2341 	int status;
2342 	p_nxge_param_t param_arr;
2343 	char *prop;
2344 
2345 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_mac_class_config"));
2346 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2347 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2348 	p_cfgp->start_mac_entry = 0;
2349 	param_arr = nxgep->param_arr;
2350 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2351 
2352 	switch (nxgep->function_num) {
2353 	case 0:
2354 	case 1:
2355 		/* 10G ports */
2356 		p_cfgp->max_macs = NXGE_MAX_MACS_XMACS;
2357 		break;
2358 	case 2:
2359 	case 3:
2360 		/* 1G ports */
2361 	default:
2362 		p_cfgp->max_macs = NXGE_MAX_MACS_BMACS;
2363 		break;
2364 	}
2365 
2366 	p_cfgp->mac_pref = 1;
2367 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2368 	    "== nxge_use_cfg_mac_class_config: "
2369 	    " mac_pref bit set def_mac_rxdma_grpid %d",
2370 	    p_cfgp->def_mac_rxdma_grpid));
2371 
2372 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2373 	    &mac_cfg_val, &mac_cnt);
2374 	if (status == DDI_PROP_SUCCESS) {
2375 		if (mac_cnt <= p_cfgp->max_macs)
2376 			status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2377 			    nxgep->dip, prop, mac_cfg_val, mac_cnt);
2378 		ddi_prop_free(mac_cfg_val);
2379 	}
2380 	nxge_set_hw_mac_class_config(nxgep);
2381 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_mac_class_config"));
2382 }
2383 
2384 static void
2385 nxge_use_cfg_class_config(p_nxge_t nxgep)
2386 {
2387 	nxge_set_hw_class_config(nxgep);
2388 }
2389 
2390 static void
2391 nxge_set_rdc_intr_property(p_nxge_t nxgep)
2392 {
2393 	int i;
2394 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2395 
2396 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_rdc_intr_property"));
2397 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2398 
2399 	for (i = 0; i < NXGE_MAX_RDCS; i++) {
2400 		p_dma_cfgp->rcr_timeout[i] = nxge_rcr_timeout;
2401 		p_dma_cfgp->rcr_threshold[i] = nxge_rcr_threshold;
2402 	}
2403 
2404 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_rdc_intr_property"));
2405 }
2406 
2407 static void
2408 nxge_set_hw_dma_config(p_nxge_t nxgep)
2409 {
2410 	int i, ndmas, ngrps, bitmap, end, st_rdc;
2411 	int32_t status;
2412 	uint8_t rdcs_per_grp;
2413 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2414 	p_nxge_hw_pt_cfg_t p_cfgp;
2415 	p_nxge_rdc_grp_t rdc_grp_p;
2416 	int rdcgrp_cfg = CFG_NOT_SPECIFIED, rx_quick_cfg;
2417 	char *prop, *prop_val;
2418 	p_nxge_param_t param_arr;
2419 	config_token_t token;
2420 	nxge_grp_t *group;
2421 
2422 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_dma_config"));
2423 
2424 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2425 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2426 	rdc_grp_p = p_dma_cfgp->rdc_grps;
2427 
2428 	bitmap = 0;
2429 	end = p_cfgp->tdc.start + p_cfgp->tdc.owned;
2430 	p_dma_cfgp->tx_dma_map = 0;
2431 	for (i = p_cfgp->tdc.start; i < end; i++) {
2432 		bitmap |= (1 << i);
2433 	}
2434 
2435 	nxgep->tx_set.owned.map |= bitmap; /* Owned, & not shared. */
2436 
2437 	group = (nxge_grp_t *)nxge_grp_add(nxgep, NXGE_TRANSMIT_GROUP);
2438 	group->map = bitmap;
2439 
2440 	p_dma_cfgp->tx_dma_map = bitmap;
2441 	param_arr = nxgep->param_arr;
2442 
2443 	/* Assume RDCs are evenly distributed */
2444 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
2445 	switch (rx_quick_cfg) {
2446 	case CFG_NOT_SPECIFIED:
2447 		prop = "rxdma-grp-cfg";
2448 		status = ddi_prop_lookup_string(DDI_DEV_T_NONE,
2449 		    nxgep->dip, 0, prop, (char **)&prop_val);
2450 		if (status != DDI_PROP_SUCCESS) {
2451 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2452 			    " property %s not found", prop));
2453 			rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2454 		} else {
2455 			token = nxge_get_config_token(prop_val);
2456 			switch (token) {
2457 			case L2_CLASSIFY:
2458 				break;
2459 			case CLASSIFY:
2460 			case L3_CLASSIFY:
2461 			case L3_DISTRIBUTE:
2462 			case L3_TCAM:
2463 				rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2464 				break;
2465 			default:
2466 				rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2467 				break;
2468 			}
2469 			ddi_prop_free(prop_val);
2470 		}
2471 		break;
2472 	case CFG_L3_WEB:
2473 	case CFG_L3_DISTRIBUTE:
2474 	case CFG_L2_CLASSIFY:
2475 	case CFG_L3_TCAM:
2476 		rdcgrp_cfg = rx_quick_cfg;
2477 		break;
2478 	default:
2479 		rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2480 		break;
2481 	}
2482 
2483 	st_rdc = p_cfgp->start_rdc;
2484 
2485 	switch (rdcgrp_cfg) {
2486 	case CFG_L3_DISTRIBUTE:
2487 	case CFG_L3_WEB:
2488 	case CFG_L3_TCAM:
2489 		ndmas = p_cfgp->max_rdcs;
2490 		ngrps = 1;
2491 		rdcs_per_grp = ndmas / ngrps;
2492 		break;
2493 	case CFG_L2_CLASSIFY:
2494 		ndmas = p_cfgp->max_rdcs / 2;
2495 		if (p_cfgp->max_rdcs < 2)
2496 			ndmas = 1;
2497 		ngrps = 1;
2498 		rdcs_per_grp = ndmas / ngrps;
2499 		break;
2500 	default:
2501 		ngrps = p_cfgp->max_rdc_grpids;
2502 		ndmas = p_cfgp->max_rdcs;
2503 		rdcs_per_grp = ndmas / ngrps;
2504 		break;
2505 	}
2506 
2507 	for (i = 0; i < ngrps; i++) {
2508 		uint8_t count = rdcs_per_grp;
2509 		dc_map_t map = 0;
2510 
2511 		rdc_grp_p = &p_dma_cfgp->rdc_grps[
2512 		    p_cfgp->def_mac_rxdma_grpid + i];
2513 		rdc_grp_p->start_rdc = st_rdc + i * rdcs_per_grp;
2514 		rdc_grp_p->max_rdcs = rdcs_per_grp;
2515 		rdc_grp_p->def_rdc = rdc_grp_p->start_rdc;
2516 
2517 		/* default to: 0, 1, 2, 3, ...., 0, 1, 2, 3.... */
2518 		while (count) {
2519 			map |= (1 << count);
2520 			count--;
2521 		}
2522 		map >>= 1;	/* In case <start_rdc> is zero (0) */
2523 		map <<= rdc_grp_p->start_rdc;
2524 		rdc_grp_p->map = map;
2525 
2526 		nxgep->rx_set.owned.map |= map; /* Owned, & not shared. */
2527 
2528 		group = (nxge_grp_t *)nxge_grp_add(nxgep, NXGE_RECEIVE_GROUP);
2529 		group->map = rdc_grp_p->map;
2530 
2531 		rdc_grp_p->config_method = RDC_TABLE_ENTRY_METHOD_SEQ;
2532 		rdc_grp_p->flag = 1; /* This group has been configured. */
2533 	}
2534 
2535 
2536 	/* default RDC */
2537 	p_cfgp->def_rdc = p_cfgp->start_rdc;
2538 	nxgep->def_rdc = p_cfgp->start_rdc;
2539 
2540 	/* full 18 byte header ? */
2541 	p_dma_cfgp->rcr_full_header = NXGE_RCR_FULL_HEADER;
2542 	p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2543 	if (nxgep->function_num > 1)
2544 		p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_1G;
2545 	p_dma_cfgp->rbr_size = nxge_rbr_size;
2546 	p_dma_cfgp->rcr_size = nxge_rcr_size;
2547 
2548 	nxge_set_rdc_intr_property(nxgep);
2549 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_dma_config"));
2550 }
2551 
2552 boolean_t
2553 nxge_check_rxdma_port_member(p_nxge_t nxgep, uint8_t rdc)
2554 {
2555 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2556 	p_nxge_hw_pt_cfg_t p_cfgp;
2557 	int status = B_TRUE;
2558 
2559 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rxdma_port_member"));
2560 
2561 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2562 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2563 
2564 	/* Receive DMA Channels */
2565 	if (rdc < p_cfgp->max_rdcs)
2566 		status = B_TRUE;
2567 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rxdma_port_member"));
2568 	return (status);
2569 }
2570 
2571 boolean_t
2572 nxge_check_txdma_port_member(p_nxge_t nxgep, uint8_t tdc)
2573 {
2574 	int status = B_FALSE;
2575 
2576 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_txdma_port_member"));
2577 
2578 	if (tdc >= nxgep->pt_config.hw_config.tdc.start &&
2579 	    tdc < nxgep->pt_config.hw_config.tdc.count)
2580 		status = B_TRUE;
2581 
2582 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_txdma_port_member"));
2583 	return (status);
2584 }
2585 
2586 boolean_t
2587 nxge_check_rxdma_rdcgrp_member(p_nxge_t nxgep, uint8_t rdc_grp, uint8_t rdc)
2588 {
2589 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2590 	int status = B_TRUE;
2591 	p_nxge_rdc_grp_t rdc_grp_p;
2592 
2593 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2594 	    " ==> nxge_check_rxdma_rdcgrp_member"));
2595 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  nxge_check_rxdma_rdcgrp_member"
2596 	    " rdc  %d group %d", rdc, rdc_grp));
2597 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2598 
2599 	rdc_grp_p = &p_dma_cfgp->rdc_grps[rdc_grp];
2600 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  max  %d ", rdc_grp_p->max_rdcs));
2601 	if (rdc >= rdc_grp_p->max_rdcs) {
2602 		status = B_FALSE;
2603 	}
2604 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2605 	    " <== nxge_check_rxdma_rdcgrp_member"));
2606 	return (status);
2607 }
2608 
2609 boolean_t
2610 nxge_check_rdcgrp_port_member(p_nxge_t nxgep, uint8_t rdc_grp)
2611 {
2612 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2613 	p_nxge_hw_pt_cfg_t p_cfgp;
2614 	int status = B_TRUE;
2615 
2616 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rdcgrp_port_member"));
2617 
2618 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2619 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2620 
2621 	if (rdc_grp >= p_cfgp->max_rdc_grpids)
2622 		status = B_FALSE;
2623 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rdcgrp_port_member"));
2624 	return (status);
2625 }
2626 
2627 static void
2628 nxge_set_hw_vlan_class_config(p_nxge_t nxgep)
2629 {
2630 	int i;
2631 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2632 	p_nxge_hw_pt_cfg_t p_cfgp;
2633 	p_nxge_param_t param_arr;
2634 	uint_t vlan_cnt;
2635 	int *vlan_cfg_val;
2636 	nxge_param_map_t *vmap;
2637 	char *prop;
2638 	p_nxge_class_pt_cfg_t p_class_cfgp;
2639 	uint32_t good_cfg[32];
2640 	int good_count = 0;
2641 	nxge_mv_cfg_t *vlan_tbl;
2642 
2643 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_vlan_config"));
2644 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2645 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2646 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2647 
2648 	param_arr = nxgep->param_arr;
2649 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2650 
2651 	/*
2652 	 * By default, VLAN to RDC group mapping is disabled Need to read HW or
2653 	 * .conf properties to find out if mapping is required
2654 	 *
2655 	 * Format
2656 	 *
2657 	 * uint32_t array, each array entry specifying the VLAN id and the
2658 	 * mapping
2659 	 *
2660 	 * bit[30] = add bit[29] = remove bit[28]  = preference bits[23-16] =
2661 	 * rdcgrp bits[15-0] = VLAN ID ( )
2662 	 */
2663 
2664 	for (i = 0; i < NXGE_MAX_VLANS; i++) {
2665 		p_class_cfgp->vlan_tbl[i].flag = 0;
2666 	}
2667 
2668 	vlan_tbl = (nxge_mv_cfg_t *)&p_class_cfgp->vlan_tbl[0];
2669 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2670 	    &vlan_cfg_val, &vlan_cnt) == DDI_PROP_SUCCESS) {
2671 		for (i = 0; i < vlan_cnt; i++) {
2672 			vmap = (nxge_param_map_t *)&vlan_cfg_val[i];
2673 			if ((vmap->param_id) &&
2674 			    (vmap->param_id < NXGE_MAX_VLANS) &&
2675 			    (vmap->map_to <
2676 			    p_cfgp->max_rdc_grpids) &&
2677 			    (vmap->map_to >= (uint8_t)0)) {
2678 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2679 				    " nxge_vlan_config mapping"
2680 				    " id %d grp %d",
2681 				    vmap->param_id, vmap->map_to));
2682 				good_cfg[good_count] = vlan_cfg_val[i];
2683 				if (vlan_tbl[vmap->param_id].flag == 0)
2684 					good_count++;
2685 				vlan_tbl[vmap->param_id].flag = 1;
2686 				vlan_tbl[vmap->param_id].rdctbl =
2687 				    vmap->map_to + p_cfgp->def_mac_rxdma_grpid;
2688 				vlan_tbl[vmap->param_id].mpr_npr = vmap->pref;
2689 			}
2690 		}
2691 		ddi_prop_free(vlan_cfg_val);
2692 		if (good_count != vlan_cnt) {
2693 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2694 			    nxgep->dip, prop, (int *)good_cfg, good_count);
2695 		}
2696 	}
2697 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_vlan_config"));
2698 }
2699 
2700 static void
2701 nxge_set_hw_mac_class_config(p_nxge_t nxgep)
2702 {
2703 	int i;
2704 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2705 	p_nxge_hw_pt_cfg_t p_cfgp;
2706 	p_nxge_param_t param_arr;
2707 	uint_t mac_cnt;
2708 	int *mac_cfg_val;
2709 	nxge_param_map_t *mac_map;
2710 	char *prop;
2711 	p_nxge_class_pt_cfg_t p_class_cfgp;
2712 	int good_count = 0;
2713 	int good_cfg[NXGE_MAX_MACS];
2714 	nxge_mv_cfg_t *mac_host_info;
2715 
2716 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_mac_config"));
2717 
2718 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2719 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2720 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2721 	mac_host_info = (nxge_mv_cfg_t *)&p_class_cfgp->mac_host_info[0];
2722 
2723 	param_arr = nxgep->param_arr;
2724 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2725 
2726 	for (i = 0; i < NXGE_MAX_MACS; i++) {
2727 		p_class_cfgp->mac_host_info[i].flag = 0;
2728 		p_class_cfgp->mac_host_info[i].rdctbl =
2729 		    p_cfgp->def_mac_rxdma_grpid;
2730 	}
2731 
2732 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2733 	    &mac_cfg_val, &mac_cnt) == DDI_PROP_SUCCESS) {
2734 		for (i = 0; i < mac_cnt; i++) {
2735 			mac_map = (nxge_param_map_t *)&mac_cfg_val[i];
2736 			if ((mac_map->param_id < p_cfgp->max_macs) &&
2737 			    (mac_map->map_to <
2738 			    p_cfgp->max_rdc_grpids) &&
2739 			    (mac_map->map_to >= (uint8_t)0)) {
2740 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2741 				    " nxge_mac_config mapping"
2742 				    " id %d grp %d",
2743 				    mac_map->param_id, mac_map->map_to));
2744 				mac_host_info[mac_map->param_id].mpr_npr =
2745 				    mac_map->pref;
2746 				mac_host_info[mac_map->param_id].rdctbl =
2747 				    mac_map->map_to +
2748 				    p_cfgp->def_mac_rxdma_grpid;
2749 				good_cfg[good_count] = mac_cfg_val[i];
2750 				if (mac_host_info[mac_map->param_id].flag == 0)
2751 					good_count++;
2752 				mac_host_info[mac_map->param_id].flag = 1;
2753 			}
2754 		}
2755 		ddi_prop_free(mac_cfg_val);
2756 		if (good_count != mac_cnt) {
2757 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2758 			    nxgep->dip, prop, good_cfg, good_count);
2759 		}
2760 	}
2761 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_mac_config"));
2762 }
2763 
2764 static void
2765 nxge_set_hw_class_config(p_nxge_t nxgep)
2766 {
2767 	int i;
2768 	p_nxge_param_t param_arr;
2769 	int *int_prop_val;
2770 	uint32_t cfg_value;
2771 	char *prop;
2772 	p_nxge_class_pt_cfg_t p_class_cfgp;
2773 	int start_prop, end_prop;
2774 	uint_t prop_cnt;
2775 
2776 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_class_config"));
2777 
2778 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2779 	param_arr = nxgep->param_arr;
2780 	start_prop = param_class_opt_ip_usr4;
2781 	end_prop = param_class_opt_ipv6_sctp;
2782 
2783 	for (i = start_prop; i <= end_prop; i++) {
2784 		prop = param_arr[i].fcode_name;
2785 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip,
2786 		    0, prop, &int_prop_val,
2787 		    &prop_cnt) == DDI_PROP_SUCCESS) {
2788 			cfg_value = (uint32_t)*int_prop_val;
2789 			ddi_prop_free(int_prop_val);
2790 		} else {
2791 			cfg_value = (uint32_t)param_arr[i].value;
2792 		}
2793 		p_class_cfgp->class_cfg[i - start_prop] = cfg_value;
2794 	}
2795 
2796 	prop = param_arr[param_h1_init_value].fcode_name;
2797 
2798 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2799 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2800 		cfg_value = (uint32_t)*int_prop_val;
2801 		ddi_prop_free(int_prop_val);
2802 	} else {
2803 		cfg_value = (uint32_t)param_arr[param_h1_init_value].value;
2804 	}
2805 
2806 	p_class_cfgp->init_h1 = (uint32_t)cfg_value;
2807 	prop = param_arr[param_h2_init_value].fcode_name;
2808 
2809 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2810 	    &int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2811 		cfg_value = (uint32_t)*int_prop_val;
2812 		ddi_prop_free(int_prop_val);
2813 	} else {
2814 		cfg_value = (uint32_t)param_arr[param_h2_init_value].value;
2815 	}
2816 
2817 	p_class_cfgp->init_h2 = (uint16_t)cfg_value;
2818 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_class_config"));
2819 }
2820 
2821 nxge_status_t
2822 nxge_ldgv_init_n2(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
2823 {
2824 	int i, maxldvs, maxldgs, nldvs;
2825 	int ldv, endldg;
2826 	uint8_t func;
2827 	uint8_t channel;
2828 	uint8_t chn_start;
2829 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
2830 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2831 	p_nxge_hw_pt_cfg_t p_cfgp;
2832 	p_nxge_ldgv_t ldgvp;
2833 	p_nxge_ldg_t ldgp, ptr;
2834 	p_nxge_ldv_t ldvp, sysldvp;
2835 	nxge_status_t status = NXGE_OK;
2836 	nxge_grp_set_t *set;
2837 
2838 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2"));
2839 	if (!*navail_p) {
2840 		*nrequired_p = 0;
2841 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2842 		    "<== nxge_ldgv_init:no avail"));
2843 		return (NXGE_ERROR);
2844 	}
2845 	/*
2846 	 * N2/NIU: one logical device owns one logical group. and each
2847 	 * device/group will be assigned one vector by Hypervisor.
2848 	 */
2849 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2850 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2851 	maxldgs = p_cfgp->max_ldgs;
2852 	if (!maxldgs) {
2853 		/* No devices configured. */
2854 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init_n2: "
2855 		    "no logical groups configured."));
2856 		return (NXGE_ERROR);
2857 	} else {
2858 		maxldvs = maxldgs + 1;
2859 	}
2860 
2861 	/*
2862 	 * If function zero instance, it needs to handle the system and MIF
2863 	 * error interrupts. MIF interrupt may not be needed for N2/NIU.
2864 	 */
2865 	func = nxgep->function_num;
2866 	if (func == 0) {
2867 		own_sys_err = B_TRUE;
2868 		if (!p_cfgp->ser_ldvid) {
2869 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2870 			    "nxge_ldgv_init_n2: func 0, ERR ID not set!"));
2871 		}
2872 		/* MIF interrupt */
2873 		if (!p_cfgp->mif_ldvid) {
2874 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2875 			    "nxge_ldgv_init_n2: func 0, MIF ID not set!"));
2876 		}
2877 	}
2878 
2879 	/*
2880 	 * Assume single partition, each function owns mac.
2881 	 */
2882 	if (!nxge_use_partition)
2883 		own_fzc = B_TRUE;
2884 
2885 	ldgvp = nxgep->ldgvp;
2886 	if (ldgvp == NULL) {
2887 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
2888 		nxgep->ldgvp = ldgvp;
2889 		ldgvp->maxldgs = (uint8_t)maxldgs;
2890 		ldgvp->maxldvs = (uint8_t)maxldvs;
2891 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(
2892 		    sizeof (nxge_ldg_t) * maxldgs, KM_SLEEP);
2893 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(
2894 		    sizeof (nxge_ldv_t) * maxldvs, KM_SLEEP);
2895 	} else {
2896 		ldgp = ldgvp->ldgp;
2897 		ldvp = ldgvp->ldvp;
2898 	}
2899 
2900 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
2901 	ldgvp->tmres = NXGE_TIMER_RESO;
2902 
2903 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
2904 	    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d",
2905 	    maxldvs, maxldgs));
2906 
2907 	/* logical start_ldg is ldv */
2908 	ptr = ldgp;
2909 	for (i = 0; i < maxldgs; i++) {
2910 		ptr->func = func;
2911 		ptr->arm = B_TRUE;
2912 		ptr->vldg_index = (uint8_t)i;
2913 		ptr->ldg_timer = NXGE_TIMER_LDG;
2914 		ptr->ldg = p_cfgp->ldg[i];
2915 		ptr->sys_intr_handler = nxge_intr;
2916 		ptr->nldvs = 0;
2917 		ptr->ldvp = NULL;
2918 		ptr->nxgep = nxgep;
2919 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2920 		    "==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d "
2921 		    "ldg %d ldgptr $%p",
2922 		    maxldvs, maxldgs, ptr->ldg, ptr));
2923 		ptr++;
2924 	}
2925 
2926 	endldg = NXGE_INT_MAX_LDG;
2927 	nldvs = 0;
2928 	ldgvp->nldvs = 0;
2929 	ldgp->ldvp = NULL;
2930 	*nrequired_p = 0;
2931 
2932 	/*
2933 	 * logical device group table is organized in the following order (same
2934 	 * as what interrupt property has). function 0: owns MAC, MIF, error,
2935 	 * rx, tx. function 1: owns MAC, rx, tx.
2936 	 */
2937 
2938 	if (own_fzc && p_cfgp->mac_ldvid) {
2939 		/* Each function should own MAC interrupt */
2940 		ldv = p_cfgp->mac_ldvid;
2941 		ldvp->ldv = (uint8_t)ldv;
2942 		ldvp->is_mac = B_TRUE;
2943 		ldvp->ldv_intr_handler = nxge_mac_intr;
2944 		ldvp->ldv_ldf_masks = 0;
2945 		ldvp->nxgep = nxgep;
2946 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2947 		    "==> nxge_ldgv_init_n2(mac): maxldvs %d ldv %d "
2948 		    "ldg %d ldgptr $%p ldvptr $%p",
2949 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2950 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2951 		nldvs++;
2952 	}
2953 
2954 	if (own_fzc && p_cfgp->mif_ldvid) {
2955 		ldv = p_cfgp->mif_ldvid;
2956 		ldvp->ldv = (uint8_t)ldv;
2957 		ldvp->is_mif = B_TRUE;
2958 		ldvp->ldv_intr_handler = nxge_mif_intr;
2959 		ldvp->ldv_ldf_masks = 0;
2960 		ldvp->nxgep = nxgep;
2961 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2962 		    "==> nxge_ldgv_init_n2(mif): maxldvs %d ldv %d "
2963 		    "ldg %d ldgptr $%p ldvptr $%p",
2964 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2965 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2966 		nldvs++;
2967 	}
2968 
2969 	/*
2970 	 * Port0 uses the HW based syserr interrupt, and port1 uses the
2971 	 * SW based syserr interrupt. There is only one syserr and the
2972 	 * function zero device gets it.
2973 	 */
2974 	if (own_sys_err && p_cfgp->ser_ldvid) {
2975 		ldv = p_cfgp->ser_ldvid;
2976 		/*
2977 		 * Port0 - HW based: use an intr vector
2978 		 */
2979 		/*
2980 		 * Unmask the system interrupt states.
2981 		 */
2982 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
2983 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
2984 		    SYS_ERR_ZCP_MASK);
2985 
2986 		ldvp->use_timer = B_TRUE;
2987 		ldvp->ldv = (uint8_t)ldv;
2988 		ldvp->is_syserr = B_TRUE;
2989 		ldvp->ldv_intr_handler = nxge_syserr_intr;
2990 		ldvp->ldv_ldf_masks = 0;
2991 		ldvp->nxgep = nxgep;
2992 		ldgvp->ldvp_syserr = ldvp;
2993 
2994 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2995 		    "==> nxge_ldgv_init_n2(syserr): maxldvs %d ldv %d "
2996 		    "ldg %d ldgptr $%p ldvptr p%p",
2997 		    maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2998 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2999 		nldvs++;
3000 	} else {
3001 		/*
3002 		 * Port1 - SW based: allocate the ldv for the syserr since
3003 		 * the vector should not be consumed for port1
3004 		 */
3005 		sysldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t), KM_SLEEP);
3006 		sysldvp->use_timer = B_TRUE;
3007 		sysldvp->ldv = NXGE_SYS_ERROR_LD;
3008 		sysldvp->is_syserr = B_TRUE;
3009 		sysldvp->ldv_intr_handler = nxge_syserr_intr;
3010 		sysldvp->ldv_ldf_masks = 0;
3011 		sysldvp->nxgep = nxgep;
3012 		ldgvp->ldvp_syserr = sysldvp;
3013 		ldgvp->ldvp_syserr_allocated = B_TRUE;
3014 	}
3015 
3016 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3017 	    "(before rx) func %d nldvs %d navail %d nrequired %d",
3018 	    func, nldvs, *navail_p, *nrequired_p));
3019 
3020 	/*
3021 	 * Start with RDC to configure logical devices for each group.
3022 	 */
3023 	chn_start = p_cfgp->ldg_chn_start;
3024 	set = &nxgep->rx_set;
3025 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3026 		if ((1 << channel) & set->owned.map) {
3027 			ldvp->is_rxdma = B_TRUE;
3028 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3029 			ldvp->channel = channel;
3030 			ldvp->vdma_index = (uint8_t)channel;
3031 			ldvp->ldv_intr_handler = nxge_rx_intr;
3032 			ldvp->ldv_ldf_masks = 0;
3033 			ldvp->nxgep = nxgep;
3034 			ldgp->ldg = p_cfgp->ldg[chn_start];
3035 
3036 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3037 			    "==> nxge_ldgv_init_n2(rx%d): maxldvs %d ldv %d "
3038 			    "ldg %d ldgptr 0x%016llx ldvptr 0x%016llx",
3039 			    i, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3040 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3041 			    endldg, nrequired_p);
3042 			nldvs++;
3043 			chn_start++;
3044 		}
3045 	}
3046 
3047 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3048 	    "func %d nldvs %d navail %d nrequired %d",
3049 	    func, nldvs, *navail_p, *nrequired_p));
3050 
3051 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3052 	    "func %d nldvs %d navail %d nrequired %d ldgp 0x%llx "
3053 	    "ldvp 0x%llx",
3054 	    func, nldvs, *navail_p, *nrequired_p, ldgp, ldvp));
3055 	/*
3056 	 * Transmit DMA channels.
3057 	 */
3058 	chn_start = p_cfgp->ldg_chn_start + 8;
3059 	set = &nxgep->tx_set;
3060 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3061 		if ((1 << channel) & set->owned.map) {
3062 			ldvp->is_txdma = B_TRUE;
3063 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3064 			ldvp->channel = channel;
3065 			ldvp->vdma_index = (uint8_t)channel;
3066 			ldvp->ldv_intr_handler = nxge_tx_intr;
3067 			ldvp->ldv_ldf_masks = 0;
3068 			ldgp->ldg = p_cfgp->ldg[chn_start];
3069 			ldvp->nxgep = nxgep;
3070 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3071 			    "==> nxge_ldgv_init_n2(tx%d): maxldvs %d ldv %d "
3072 			    "ldg %d ldgptr %p ldvptr %p",
3073 			    channel, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
3074 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3075 			    endldg, nrequired_p);
3076 			nldvs++;
3077 			chn_start++;
3078 		}
3079 	}
3080 
3081 	ldgvp->ldg_intrs = *nrequired_p;
3082 	ldgvp->nldvs = (uint8_t)nldvs;
3083 
3084 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
3085 	    "func %d nldvs %d maxgrps %d navail %d nrequired %d",
3086 	    func, nldvs, maxldgs, *navail_p, *nrequired_p));
3087 
3088 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init_n2"));
3089 	return (status);
3090 }
3091 
3092 /*
3093  * Interrupts related interface functions.
3094  */
3095 
3096 nxge_status_t
3097 nxge_ldgv_init(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
3098 {
3099 	int i, maxldvs, maxldgs, nldvs;
3100 	int ldv, ldg, endldg, ngrps;
3101 	uint8_t func;
3102 	uint8_t channel;
3103 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
3104 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
3105 	p_nxge_hw_pt_cfg_t p_cfgp;
3106 	p_nxge_ldgv_t ldgvp;
3107 	p_nxge_ldg_t ldgp, ptr;
3108 	p_nxge_ldv_t ldvp;
3109 	nxge_grp_set_t *set;
3110 
3111 	nxge_status_t status = NXGE_OK;
3112 
3113 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init"));
3114 	if (!*navail_p) {
3115 		*nrequired_p = 0;
3116 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3117 		    "<== nxge_ldgv_init:no avail"));
3118 		return (NXGE_ERROR);
3119 	}
3120 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
3121 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
3122 
3123 	nldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3124 
3125 	/*
3126 	 * If function zero instance, it needs to handle the system error
3127 	 * interrupts.
3128 	 */
3129 	func = nxgep->function_num;
3130 	if (func == 0) {
3131 		nldvs++;
3132 		own_sys_err = B_TRUE;
3133 	} else {
3134 		/* use timer */
3135 		nldvs++;
3136 	}
3137 
3138 	/*
3139 	 * Assume single partition, each function owns mac.
3140 	 */
3141 	if (!nxge_use_partition) {
3142 		/* mac */
3143 		nldvs++;
3144 		/* MIF */
3145 		nldvs++;
3146 		own_fzc = B_TRUE;
3147 	}
3148 	maxldvs = nldvs;
3149 	maxldgs = p_cfgp->max_ldgs;
3150 	if (!maxldvs || !maxldgs) {
3151 		/* No devices configured. */
3152 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init: "
3153 		    "no logical devices or groups configured."));
3154 		return (NXGE_ERROR);
3155 	}
3156 	ldgvp = nxgep->ldgvp;
3157 	if (ldgvp == NULL) {
3158 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
3159 		nxgep->ldgvp = ldgvp;
3160 		ldgvp->maxldgs = (uint8_t)maxldgs;
3161 		ldgvp->maxldvs = (uint8_t)maxldvs;
3162 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(sizeof (nxge_ldg_t) * maxldgs,
3163 		    KM_SLEEP);
3164 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t) * maxldvs,
3165 		    KM_SLEEP);
3166 	}
3167 	ldgvp->ndma_ldvs = p_cfgp->tdc.owned + p_cfgp->max_rdcs;
3168 	ldgvp->tmres = NXGE_TIMER_RESO;
3169 
3170 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3171 	    "==> nxge_ldgv_init: maxldvs %d maxldgs %d nldvs %d",
3172 	    maxldvs, maxldgs, nldvs));
3173 	ldg = p_cfgp->start_ldg;
3174 	ptr = ldgp;
3175 	for (i = 0; i < maxldgs; i++) {
3176 		ptr->func = func;
3177 		ptr->arm = B_TRUE;
3178 		ptr->vldg_index = (uint8_t)i;
3179 		ptr->ldg_timer = NXGE_TIMER_LDG;
3180 		ptr->ldg = ldg++;
3181 		ptr->sys_intr_handler = nxge_intr;
3182 		ptr->nldvs = 0;
3183 		ptr->nxgep = nxgep;
3184 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3185 		    "==> nxge_ldgv_init: maxldvs %d maxldgs %d ldg %d",
3186 		    maxldvs, maxldgs, ptr->ldg));
3187 		ptr++;
3188 	}
3189 
3190 	ldg = p_cfgp->start_ldg;
3191 	if (maxldgs > *navail_p) {
3192 		ngrps = *navail_p;
3193 	} else {
3194 		ngrps = maxldgs;
3195 	}
3196 	endldg = ldg + ngrps;
3197 
3198 	/*
3199 	 * Receive DMA channels.
3200 	 */
3201 	nldvs = 0;
3202 	ldgvp->nldvs = 0;
3203 	ldgp->ldvp = NULL;
3204 	*nrequired_p = 0;
3205 
3206 	/*
3207 	 * Start with RDC to configure logical devices for each group.
3208 	 */
3209 	set = &nxgep->rx_set;
3210 	for (channel = 0; channel < NXGE_MAX_RDCS; channel++) {
3211 		if ((1 << channel) & set->owned.map) {
3212 			/* For now, <channel & <vdma_index> are the same. */
3213 			ldvp->is_rxdma = B_TRUE;
3214 			ldvp->ldv = (uint8_t)channel + NXGE_RDMA_LD_START;
3215 			ldvp->channel = channel;
3216 			ldvp->vdma_index = (uint8_t)channel;
3217 			ldvp->ldv_intr_handler = nxge_rx_intr;
3218 			ldvp->ldv_ldf_masks = 0;
3219 			ldvp->use_timer = B_FALSE;
3220 			ldvp->nxgep = nxgep;
3221 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3222 			    endldg, nrequired_p);
3223 			nldvs++;
3224 		}
3225 	}
3226 
3227 	/*
3228 	 * Transmit DMA channels.
3229 	 */
3230 	set = &nxgep->tx_set;
3231 	for (channel = 0; channel < NXGE_MAX_TDCS; channel++) {
3232 		if ((1 << channel) & set->owned.map) {
3233 			/* For now, <channel & <vdma_index> are the same. */
3234 			ldvp->is_txdma = B_TRUE;
3235 			ldvp->ldv = (uint8_t)channel + NXGE_TDMA_LD_START;
3236 			ldvp->channel = channel;
3237 			ldvp->vdma_index = (uint8_t)channel;
3238 			ldvp->ldv_intr_handler = nxge_tx_intr;
3239 			ldvp->ldv_ldf_masks = 0;
3240 			ldvp->use_timer = B_FALSE;
3241 			ldvp->nxgep = nxgep;
3242 			nxge_ldgv_setup(&ldgp, &ldvp, ldvp->ldv,
3243 			    endldg, nrequired_p);
3244 			nldvs++;
3245 		}
3246 	}
3247 
3248 	if (own_fzc) {
3249 		ldv = NXGE_MIF_LD;
3250 		ldvp->ldv = (uint8_t)ldv;
3251 		ldvp->is_mif = B_TRUE;
3252 		ldvp->ldv_intr_handler = nxge_mif_intr;
3253 		ldvp->ldv_ldf_masks = 0;
3254 		ldvp->use_timer = B_FALSE;
3255 		ldvp->nxgep = nxgep;
3256 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3257 		nldvs++;
3258 	}
3259 	/*
3260 	 * MAC port (function zero control)
3261 	 */
3262 	if (own_fzc) {
3263 		ldvp->is_mac = B_TRUE;
3264 		ldvp->ldv_intr_handler = nxge_mac_intr;
3265 		ldvp->ldv_ldf_masks = 0;
3266 		ldv = func + NXGE_MAC_LD_START;
3267 		ldvp->ldv = (uint8_t)ldv;
3268 		ldvp->use_timer = B_FALSE;
3269 		ldvp->nxgep = nxgep;
3270 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3271 		nldvs++;
3272 	}
3273 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3274 	    "func %d nldvs %d navail %d nrequired %d",
3275 	    func, nldvs, *navail_p, *nrequired_p));
3276 	/*
3277 	 * Function 0 owns system error interrupts.
3278 	 */
3279 	ldvp->use_timer = B_TRUE;
3280 	if (own_sys_err) {
3281 		ldv = NXGE_SYS_ERROR_LD;
3282 		ldvp->ldv = (uint8_t)ldv;
3283 		ldvp->is_syserr = B_TRUE;
3284 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3285 		ldvp->ldv_ldf_masks = 0;
3286 		ldvp->nxgep = nxgep;
3287 		ldgvp->ldvp_syserr = ldvp;
3288 		/*
3289 		 * Unmask the system interrupt states.
3290 		 */
3291 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3292 		    SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3293 		    SYS_ERR_ZCP_MASK);
3294 
3295 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3296 		nldvs++;
3297 	} else {
3298 		ldv = NXGE_SYS_ERROR_LD;
3299 		ldvp->ldv = (uint8_t)ldv;
3300 		ldvp->is_syserr = B_TRUE;
3301 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3302 		ldvp->nxgep = nxgep;
3303 		ldvp->ldv_ldf_masks = 0;
3304 		ldgvp->ldvp_syserr = ldvp;
3305 	}
3306 
3307 	ldgvp->ldg_intrs = *nrequired_p;
3308 
3309 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3310 	    "func %d nldvs %d navail %d nrequired %d",
3311 	    func, nldvs, *navail_p, *nrequired_p));
3312 
3313 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init"));
3314 	return (status);
3315 }
3316 
3317 nxge_status_t
3318 nxge_ldgv_uninit(p_nxge_t nxgep)
3319 {
3320 	p_nxge_ldgv_t ldgvp;
3321 
3322 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_uninit"));
3323 	ldgvp = nxgep->ldgvp;
3324 	if (ldgvp == NULL) {
3325 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_uninit: "
3326 		    "no logical group configured."));
3327 		return (NXGE_OK);
3328 	}
3329 	if (ldgvp->ldvp_syserr_allocated == B_TRUE) {
3330 		KMEM_FREE(ldgvp->ldvp_syserr, sizeof (nxge_ldv_t));
3331 	}
3332 	if (ldgvp->ldgp) {
3333 		KMEM_FREE(ldgvp->ldgp, sizeof (nxge_ldg_t) * ldgvp->maxldgs);
3334 	}
3335 	if (ldgvp->ldvp) {
3336 		KMEM_FREE(ldgvp->ldvp, sizeof (nxge_ldv_t) * ldgvp->maxldvs);
3337 	}
3338 	KMEM_FREE(ldgvp, sizeof (nxge_ldgv_t));
3339 	nxgep->ldgvp = NULL;
3340 
3341 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_uninit"));
3342 	return (NXGE_OK);
3343 }
3344 
3345 nxge_status_t
3346 nxge_intr_ldgv_init(p_nxge_t nxgep)
3347 {
3348 	nxge_status_t status = NXGE_OK;
3349 
3350 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_ldgv_init"));
3351 	/*
3352 	 * Configure the logical device group numbers, state vectors and
3353 	 * interrupt masks for each logical device.
3354 	 */
3355 	status = nxge_fzc_intr_init(nxgep);
3356 
3357 	/*
3358 	 * Configure logical device masks and timers.
3359 	 */
3360 	status = nxge_intr_mask_mgmt(nxgep);
3361 
3362 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_ldgv_init"));
3363 	return (status);
3364 }
3365 
3366 nxge_status_t
3367 nxge_intr_mask_mgmt(p_nxge_t nxgep)
3368 {
3369 	p_nxge_ldgv_t ldgvp;
3370 	p_nxge_ldg_t ldgp;
3371 	p_nxge_ldv_t ldvp;
3372 	npi_handle_t handle;
3373 	int i, j;
3374 	npi_status_t rs = NPI_SUCCESS;
3375 
3376 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_mask_mgmt"));
3377 
3378 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3379 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3380 		    "<== nxge_intr_mask_mgmt: Null ldgvp"));
3381 		return (NXGE_ERROR);
3382 	}
3383 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3384 	ldgp = ldgvp->ldgp;
3385 	ldvp = ldgvp->ldvp;
3386 	if (ldgp == NULL || ldvp == NULL) {
3387 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3388 		    "<== nxge_intr_mask_mgmt: Null ldgp or ldvp"));
3389 		return (NXGE_ERROR);
3390 	}
3391 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3392 	    "==> nxge_intr_mask_mgmt: # of intrs %d ", ldgvp->ldg_intrs));
3393 	/* Initialize masks. */
3394 	if (nxgep->niu_type != N2_NIU) {
3395 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3396 		    "==> nxge_intr_mask_mgmt(Neptune): # intrs %d ",
3397 		    ldgvp->ldg_intrs));
3398 		for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3399 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3400 			    "==> nxge_intr_mask_mgmt(Neptune): # ldv %d "
3401 			    "in group %d", ldgp->nldvs, ldgp->ldg));
3402 			for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3403 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3404 				    "==> nxge_intr_mask_mgmt: set ldv # %d "
3405 				    "for ldg %d", ldvp->ldv, ldgp->ldg));
3406 				rs = npi_intr_mask_set(handle, ldvp->ldv,
3407 				    ldvp->ldv_ldf_masks);
3408 				if (rs != NPI_SUCCESS) {
3409 					NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3410 					    "<== nxge_intr_mask_mgmt: "
3411 					    "set mask failed "
3412 					    " rs 0x%x ldv %d mask 0x%x",
3413 					    rs, ldvp->ldv,
3414 					    ldvp->ldv_ldf_masks));
3415 					return (NXGE_ERROR | rs);
3416 				}
3417 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3418 				    "==> nxge_intr_mask_mgmt: "
3419 				    "set mask OK "
3420 				    " rs 0x%x ldv %d mask 0x%x",
3421 				    rs, ldvp->ldv,
3422 				    ldvp->ldv_ldf_masks));
3423 			}
3424 		}
3425 	}
3426 	ldgp = ldgvp->ldgp;
3427 	/* Configure timer and arm bit */
3428 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3429 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3430 		    ldgp->arm, ldgp->ldg_timer);
3431 		if (rs != NPI_SUCCESS) {
3432 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3433 			    "<== nxge_intr_mask_mgmt: "
3434 			    "set timer failed "
3435 			    " rs 0x%x dg %d timer 0x%x",
3436 			    rs, ldgp->ldg, ldgp->ldg_timer));
3437 			return (NXGE_ERROR | rs);
3438 		}
3439 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3440 		    "==> nxge_intr_mask_mgmt: "
3441 		    "set timer OK "
3442 		    " rs 0x%x ldg %d timer 0x%x",
3443 		    rs, ldgp->ldg, ldgp->ldg_timer));
3444 	}
3445 
3446 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_fzc_intr_mask_mgmt"));
3447 	return (NXGE_OK);
3448 }
3449 
3450 nxge_status_t
3451 nxge_intr_mask_mgmt_set(p_nxge_t nxgep, boolean_t on)
3452 {
3453 	p_nxge_ldgv_t ldgvp;
3454 	p_nxge_ldg_t ldgp;
3455 	p_nxge_ldv_t ldvp;
3456 	npi_handle_t handle;
3457 	int i, j;
3458 	npi_status_t rs = NPI_SUCCESS;
3459 
3460 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3461 	    "==> nxge_intr_mask_mgmt_set (%d)", on));
3462 
3463 	if (nxgep->niu_type == N2_NIU) {
3464 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3465 		    "<== nxge_intr_mask_mgmt_set (%d) not set (N2/NIU)",
3466 		    on));
3467 		return (NXGE_ERROR);
3468 	}
3469 
3470 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3471 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3472 		    "==> nxge_intr_mask_mgmt_set: Null ldgvp"));
3473 		return (NXGE_ERROR);
3474 	}
3475 
3476 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3477 	ldgp = ldgvp->ldgp;
3478 	ldvp = ldgvp->ldvp;
3479 	if (ldgp == NULL || ldvp == NULL) {
3480 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3481 		    "<== nxge_intr_mask_mgmt_set: Null ldgp or ldvp"));
3482 		return (NXGE_ERROR);
3483 	}
3484 	/* set masks. */
3485 	for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3486 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3487 		    "==> nxge_intr_mask_mgmt_set: flag %d ldg %d"
3488 		    "set mask nldvs %d", on, ldgp->ldg, ldgp->nldvs));
3489 		for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3490 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3491 			    "==> nxge_intr_mask_mgmt_set: "
3492 			    "for %d %d flag %d", i, j, on));
3493 			if (on) {
3494 				ldvp->ldv_ldf_masks = 0;
3495 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3496 				    "==> nxge_intr_mask_mgmt_set: "
3497 				    "ON mask off"));
3498 			} else if (!on) {
3499 				ldvp->ldv_ldf_masks = (uint8_t)LD_IM1_MASK;
3500 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3501 				    "==> nxge_intr_mask_mgmt_set:mask on"));
3502 			}
3503 			rs = npi_intr_mask_set(handle, ldvp->ldv,
3504 			    ldvp->ldv_ldf_masks);
3505 			if (rs != NPI_SUCCESS) {
3506 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3507 				    "==> nxge_intr_mask_mgmt_set: "
3508 				    "set mask failed "
3509 				    " rs 0x%x ldv %d mask 0x%x",
3510 				    rs, ldvp->ldv, ldvp->ldv_ldf_masks));
3511 				return (NXGE_ERROR | rs);
3512 			}
3513 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3514 			    "==> nxge_intr_mask_mgmt_set: flag %d"
3515 			    "set mask OK "
3516 			    " ldv %d mask 0x%x",
3517 			    on, ldvp->ldv, ldvp->ldv_ldf_masks));
3518 		}
3519 	}
3520 
3521 	ldgp = ldgvp->ldgp;
3522 	/* set the arm bit */
3523 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3524 		if (on && !ldgp->arm) {
3525 			ldgp->arm = B_TRUE;
3526 		} else if (!on && ldgp->arm) {
3527 			ldgp->arm = B_FALSE;
3528 		}
3529 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3530 		    ldgp->arm, ldgp->ldg_timer);
3531 		if (rs != NPI_SUCCESS) {
3532 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3533 			    "<== nxge_intr_mask_mgmt_set: "
3534 			    "set timer failed "
3535 			    " rs 0x%x ldg %d timer 0x%x",
3536 			    rs, ldgp->ldg, ldgp->ldg_timer));
3537 			return (NXGE_ERROR | rs);
3538 		}
3539 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3540 		    "==> nxge_intr_mask_mgmt_set: OK (flag %d) "
3541 		    "set timer "
3542 		    " ldg %d timer 0x%x",
3543 		    on, ldgp->ldg, ldgp->ldg_timer));
3544 	}
3545 
3546 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_mask_mgmt_set"));
3547 	return (NXGE_OK);
3548 }
3549 
3550 static nxge_status_t
3551 nxge_get_mac_addr_properties(p_nxge_t nxgep)
3552 {
3553 #if defined(_BIG_ENDIAN)
3554 	uchar_t *prop_val;
3555 	uint_t prop_len;
3556 	uint_t j;
3557 #endif
3558 	uint_t i;
3559 	uint8_t func_num;
3560 	boolean_t compute_macs = B_TRUE;
3561 
3562 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_mac_addr_properties "));
3563 
3564 #if defined(_BIG_ENDIAN)
3565 	/*
3566 	 * Get the ethernet address.
3567 	 */
3568 	(void) localetheraddr((struct ether_addr *)NULL, &nxgep->ouraddr);
3569 
3570 	/*
3571 	 * Check if it is an adapter with its own local mac address If it is
3572 	 * present, override the system mac address.
3573 	 */
3574 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3575 	    "local-mac-address", &prop_val,
3576 	    &prop_len) == DDI_PROP_SUCCESS) {
3577 		if (prop_len == ETHERADDRL) {
3578 			nxgep->factaddr = *(p_ether_addr_t)prop_val;
3579 			NXGE_DEBUG_MSG((nxgep, DDI_CTL, "Local mac address = "
3580 			    "%02x:%02x:%02x:%02x:%02x:%02x",
3581 			    prop_val[0], prop_val[1], prop_val[2],
3582 			    prop_val[3], prop_val[4], prop_val[5]));
3583 		}
3584 		ddi_prop_free(prop_val);
3585 	}
3586 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3587 	    "local-mac-address?", &prop_val,
3588 	    &prop_len) == DDI_PROP_SUCCESS) {
3589 		if (strncmp("true", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3590 			nxgep->ouraddr = nxgep->factaddr;
3591 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3592 			    "Using local MAC address"));
3593 		}
3594 		ddi_prop_free(prop_val);
3595 	} else {
3596 		nxgep->ouraddr = nxgep->factaddr;
3597 	}
3598 
3599 	if ((!nxgep->vpd_info.present) ||
3600 	    (nxge_is_valid_local_mac(nxgep->factaddr)))
3601 		goto got_mac_addr;
3602 
3603 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "nxge_get_mac_addr_properties: "
3604 	    "MAC address from properties is not valid...reading from PROM"));
3605 
3606 #endif
3607 	if (!nxgep->vpd_info.ver_valid) {
3608 		(void) nxge_espc_mac_addrs_get(nxgep);
3609 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3610 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3611 			    "MAC address"));
3612 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3613 			    "[%s] invalid...please update",
3614 			    nxgep->vpd_info.ver));
3615 			return (NXGE_ERROR);
3616 		}
3617 		nxgep->ouraddr = nxgep->factaddr;
3618 		goto got_mac_addr;
3619 	}
3620 	/*
3621 	 * First get the MAC address from the info in the VPD data read
3622 	 * from the EEPROM.
3623 	 */
3624 	nxge_espc_get_next_mac_addr(nxgep->vpd_info.mac_addr,
3625 	    nxgep->function_num, &nxgep->factaddr);
3626 
3627 	if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3628 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3629 		    "nxge_get_mac_addr_properties: "
3630 		    "MAC address in EEPROM VPD data not valid"
3631 		    "...reading from NCR registers"));
3632 		(void) nxge_espc_mac_addrs_get(nxgep);
3633 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3634 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "Failed to get "
3635 			    "MAC address"));
3636 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3637 			    "[%s] invalid...please update",
3638 			    nxgep->vpd_info.ver));
3639 			return (NXGE_ERROR);
3640 		}
3641 	}
3642 
3643 	nxgep->ouraddr = nxgep->factaddr;
3644 
3645 got_mac_addr:
3646 	func_num = nxgep->function_num;
3647 
3648 	/*
3649 	 * Note: mac-addresses property is the list of mac addresses for a
3650 	 * port. NXGE_MAX_MMAC_ADDRS is the total number of MAC addresses
3651 	 * allocated for a board.
3652 	 */
3653 	nxgep->nxge_mmac_info.total_factory_macs = NXGE_MAX_MMAC_ADDRS;
3654 
3655 #if defined(_BIG_ENDIAN)
3656 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3657 	    "mac-addresses", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3658 		/*
3659 		 * XAUI may have up to 18 MACs, more than the XMAC can
3660 		 * use (1 unique MAC plus 16 alternate MACs)
3661 		 */
3662 		nxgep->nxge_mmac_info.num_factory_mmac =
3663 		    prop_len / ETHERADDRL - 1;
3664 		if (nxgep->nxge_mmac_info.num_factory_mmac >
3665 		    XMAC_MAX_ALT_ADDR_ENTRY) {
3666 			nxgep->nxge_mmac_info.num_factory_mmac =
3667 			    XMAC_MAX_ALT_ADDR_ENTRY;
3668 		}
3669 
3670 		for (i = 1; i <= nxgep->nxge_mmac_info.num_factory_mmac; i++) {
3671 			for (j = 0; j < ETHERADDRL; j++) {
3672 				nxgep->nxge_mmac_info.factory_mac_pool[i][j] =
3673 				    *(prop_val + (i * ETHERADDRL) + j);
3674 			}
3675 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3676 			    "nxge_get_mac_addr_properties: Alt mac[%d] from "
3677 			    "mac-addresses property[%2x:%2x:%2x:%2x:%2x:%2x]",
3678 			    i, nxgep->nxge_mmac_info.factory_mac_pool[i][0],
3679 			    nxgep->nxge_mmac_info.factory_mac_pool[i][1],
3680 			    nxgep->nxge_mmac_info.factory_mac_pool[i][2],
3681 			    nxgep->nxge_mmac_info.factory_mac_pool[i][3],
3682 			    nxgep->nxge_mmac_info.factory_mac_pool[i][4],
3683 			    nxgep->nxge_mmac_info.factory_mac_pool[i][5]));
3684 		}
3685 
3686 		compute_macs = B_FALSE;
3687 		ddi_prop_free(prop_val);
3688 		goto got_mmac_info;
3689 	}
3690 #endif
3691 	/*
3692 	 * total_factory_macs = 32
3693 	 * num_factory_mmac = (32 >> (nports/2)) - 1
3694 	 * So if nports = 4, then num_factory_mmac =  7
3695 	 *    if nports = 2, then num_factory_mmac = 15
3696 	 */
3697 	nxgep->nxge_mmac_info.num_factory_mmac =
3698 	    ((nxgep->nxge_mmac_info.total_factory_macs >>
3699 	    (nxgep->nports >> 1))) - 1;
3700 
3701 got_mmac_info:
3702 
3703 	if ((nxgep->function_num < 2) &&
3704 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3705 	    XMAC_MAX_ALT_ADDR_ENTRY)) {
3706 		nxgep->nxge_mmac_info.num_factory_mmac =
3707 		    XMAC_MAX_ALT_ADDR_ENTRY;
3708 	} else if ((nxgep->function_num > 1) &&
3709 	    (nxgep->nxge_mmac_info.num_factory_mmac >
3710 	    BMAC_MAX_ALT_ADDR_ENTRY)) {
3711 		nxgep->nxge_mmac_info.num_factory_mmac =
3712 		    BMAC_MAX_ALT_ADDR_ENTRY;
3713 	}
3714 
3715 	for (i = 0; i <= nxgep->nxge_mmac_info.num_mmac; i++) {
3716 		(void) npi_mac_altaddr_disable(nxgep->npi_handle,
3717 		    NXGE_GET_PORT_NUM(func_num), i);
3718 	}
3719 
3720 	(void) nxge_init_mmac(nxgep, compute_macs);
3721 	return (NXGE_OK);
3722 }
3723 
3724 void
3725 nxge_get_xcvr_properties(p_nxge_t nxgep)
3726 {
3727 	uchar_t *prop_val;
3728 	uint_t prop_len;
3729 
3730 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_xcvr_properties"));
3731 
3732 	/*
3733 	 * Read the type of physical layer interface being used.
3734 	 */
3735 	nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3736 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3737 	    "phy-type", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3738 		if (strncmp("pcs", (caddr_t)prop_val,
3739 		    (size_t)prop_len) == 0) {
3740 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3741 		} else {
3742 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3743 		}
3744 		ddi_prop_free(prop_val);
3745 	} else if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3746 	    "phy-interface", &prop_val,
3747 	    &prop_len) == DDI_PROP_SUCCESS) {
3748 		if (strncmp("pcs", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3749 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3750 		} else {
3751 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3752 		}
3753 		ddi_prop_free(prop_val);
3754 	}
3755 }
3756 
3757 /*
3758  * Static functions start here.
3759  */
3760 
3761 static void
3762 nxge_ldgv_setup(p_nxge_ldg_t *ldgp, p_nxge_ldv_t *ldvp, uint8_t ldv,
3763 	uint8_t endldg, int *ngrps)
3764 {
3765 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup"));
3766 	/* Assign the group number for each device. */
3767 	(*ldvp)->ldg_assigned = (*ldgp)->ldg;
3768 	(*ldvp)->ldgp = *ldgp;
3769 	(*ldvp)->ldv = ldv;
3770 
3771 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3772 	    "ldv %d endldg %d ldg %d, ldvp $%p",
3773 	    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3774 
3775 	(*ldgp)->nldvs++;
3776 	if ((*ldgp)->ldg == (endldg - 1)) {
3777 		if ((*ldgp)->ldvp == NULL) {
3778 			(*ldgp)->ldvp = *ldvp;
3779 			*ngrps += 1;
3780 			NXGE_DEBUG_MSG((NULL, INT_CTL,
3781 			    "==> nxge_ldgv_setup: ngrps %d", *ngrps));
3782 		}
3783 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3784 		    "==> nxge_ldgv_setup: ldvp $%p ngrps %d",
3785 		    *ldvp, *ngrps));
3786 		++*ldvp;
3787 	} else {
3788 		(*ldgp)->ldvp = *ldvp;
3789 		*ngrps += 1;
3790 		NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup(done): "
3791 		    "ldv %d endldg %d ldg %d, ldvp $%p",
3792 		    ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3793 		(*ldvp) = ++*ldvp;
3794 		(*ldgp) = ++*ldgp;
3795 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3796 		    "==> nxge_ldgv_setup: new ngrps %d", *ngrps));
3797 	}
3798 
3799 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3800 	    "ldv %d ldvp $%p endldg %d ngrps %d",
3801 	    ldv, ldvp, endldg, *ngrps));
3802 
3803 	NXGE_DEBUG_MSG((NULL, INT_CTL, "<== nxge_ldgv_setup"));
3804 }
3805 
3806 /*
3807  * Note: This function assumes the following distribution of mac
3808  * addresses among 4 ports in neptune:
3809  *
3810  *      -------------
3811  *    0|            |0 - local-mac-address for fn 0
3812  *      -------------
3813  *    1|            |1 - local-mac-address for fn 1
3814  *      -------------
3815  *    2|            |2 - local-mac-address for fn 2
3816  *      -------------
3817  *    3|            |3 - local-mac-address for fn 3
3818  *      -------------
3819  *     |            |4 - Start of alt. mac addr. for fn 0
3820  *     |            |
3821  *     |            |
3822  *     |            |10
3823  *     --------------
3824  *     |            |11 - Start of alt. mac addr. for fn 1
3825  *     |            |
3826  *     |            |
3827  *     |            |17
3828  *     --------------
3829  *     |            |18 - Start of alt. mac addr. for fn 2
3830  *     |            |
3831  *     |            |
3832  *     |            |24
3833  *     --------------
3834  *     |            |25 - Start of alt. mac addr. for fn 3
3835  *     |            |
3836  *     |            |
3837  *     |            |31
3838  *     --------------
3839  *
3840  * For N2/NIU the mac addresses is from XAUI card.
3841  *
3842  * When 'compute_addrs' is true, the alternate mac addresses are computed
3843  * using the unique mac address as base. Otherwise the alternate addresses
3844  * are assigned from the list read off the 'mac-addresses' property.
3845  */
3846 
3847 static void
3848 nxge_init_mmac(p_nxge_t nxgep, boolean_t compute_addrs)
3849 {
3850 	int slot;
3851 	uint8_t func_num;
3852 	uint16_t *base_mmac_addr;
3853 	uint32_t alt_mac_ls4b;
3854 	uint16_t *mmac_addr;
3855 	uint32_t base_mac_ls4b; /* least significant 4 bytes */
3856 	nxge_mmac_t *mmac_info;
3857 	npi_mac_addr_t mac_addr;
3858 
3859 	func_num = nxgep->function_num;
3860 	base_mmac_addr = (uint16_t *)&nxgep->factaddr;
3861 	mmac_info = (nxge_mmac_t *)&nxgep->nxge_mmac_info;
3862 
3863 	if (compute_addrs) {
3864 		base_mac_ls4b = ((uint32_t)base_mmac_addr[1]) << 16 |
3865 		    base_mmac_addr[2];
3866 
3867 		if (nxgep->niu_type == N2_NIU) {
3868 			/* ls4b of 1st altmac */
3869 			alt_mac_ls4b = base_mac_ls4b + 1;
3870 		} else {			/* Neptune */
3871 			alt_mac_ls4b = base_mac_ls4b +
3872 			    (nxgep->nports - func_num) +
3873 			    (func_num * (mmac_info->num_factory_mmac));
3874 		}
3875 	}
3876 
3877 	/* Set flags for unique MAC */
3878 	mmac_info->mac_pool[0].flags |= MMAC_SLOT_USED | MMAC_VENDOR_ADDR;
3879 
3880 	/* Clear flags of all alternate MAC slots */
3881 	for (slot = 1; slot <= mmac_info->num_mmac; slot++) {
3882 		if (slot <= mmac_info->num_factory_mmac)
3883 			mmac_info->mac_pool[slot].flags = MMAC_VENDOR_ADDR;
3884 		else
3885 			mmac_info->mac_pool[slot].flags = 0;
3886 	}
3887 
3888 	/* Generate and store factory alternate MACs */
3889 	for (slot = 1; slot <= mmac_info->num_factory_mmac; slot++) {
3890 		mmac_addr = (uint16_t *)&mmac_info->factory_mac_pool[slot];
3891 		if (compute_addrs) {
3892 			mmac_addr[0] = base_mmac_addr[0];
3893 			mac_addr.w2 = mmac_addr[0];
3894 
3895 			mmac_addr[1] = (alt_mac_ls4b >> 16) & 0x0FFFF;
3896 			mac_addr.w1 = mmac_addr[1];
3897 
3898 			mmac_addr[2] = alt_mac_ls4b & 0x0FFFF;
3899 			mac_addr.w0 = mmac_addr[2];
3900 
3901 			alt_mac_ls4b++;
3902 		} else {
3903 			mac_addr.w2 = mmac_addr[0];
3904 			mac_addr.w1 = mmac_addr[1];
3905 			mac_addr.w0 = mmac_addr[2];
3906 		}
3907 
3908 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3909 		    "mac_pool_addr[%2x:%2x:%2x:%2x:%2x:%2x] npi_addr[%x%x%x]",
3910 		    mmac_info->factory_mac_pool[slot][0],
3911 		    mmac_info->factory_mac_pool[slot][1],
3912 		    mmac_info->factory_mac_pool[slot][2],
3913 		    mmac_info->factory_mac_pool[slot][3],
3914 		    mmac_info->factory_mac_pool[slot][4],
3915 		    mmac_info->factory_mac_pool[slot][5],
3916 		    mac_addr.w0, mac_addr.w1, mac_addr.w2));
3917 		/*
3918 		 * slot minus 1 because npi_mac_altaddr_entry expects 0
3919 		 * for the first alternate mac address.
3920 		 */
3921 		(void) npi_mac_altaddr_entry(nxgep->npi_handle, OP_SET,
3922 		    NXGE_GET_PORT_NUM(func_num), slot - 1, &mac_addr);
3923 	}
3924 	/* Initialize the first two parameters for mmac kstat */
3925 	nxgep->statsp->mmac_stats.mmac_max_cnt = mmac_info->num_mmac;
3926 	nxgep->statsp->mmac_stats.mmac_avail_cnt = mmac_info->num_mmac;
3927 }
3928