xref: /titanic_50/usr/src/uts/common/io/mac/mac_client.c (revision 7b0bedd42192a2f6bcd6fc4b637d23892303a962)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  * - General Introduction:
29  *
30  * This file contains the implementation of the MAC client kernel
31  * API and related code. The MAC client API allows a kernel module
32  * to gain access to a MAC instance (physical NIC, link aggregation, etc).
33  * It allows a MAC client to associate itself with a MAC address,
34  * VLANs, callback functions for data traffic and for promiscuous mode.
35  * The MAC client API is also used to specify the properties associated
36  * with a MAC client, such as bandwidth limits, priority, CPUS, etc.
37  * These properties are further used to determine the hardware resources
38  * to allocate to the various MAC clients.
39  *
40  * - Primary MAC clients:
41  *
42  * The MAC client API refers to "primary MAC clients". A primary MAC
43  * client is a client which "owns" the primary MAC address of
44  * the underlying MAC instance. The primary MAC address is called out
45  * since it is associated with specific semantics: the primary MAC
46  * address is the MAC address which is assigned to the IP interface
47  * when it is plumbed, and the primary MAC address is assigned
48  * to VLAN data-links. The primary address of a MAC instance can
49  * also change dynamically from under the MAC client, for example
50  * as a result of a change of state of a link aggregation. In that
51  * case the MAC layer automatically updates all data-structures which
52  * refer to the current value of the primary MAC address. Typical
53  * primary MAC clients are dls, aggr, and xnb. A typical non-primary
54  * MAC client is the vnic driver.
55  *
56  * - Virtual Switching:
57  *
58  * The MAC layer implements a virtual switch between the MAC clients
59  * (primary and non-primary) defined on top of the same underlying
60  * NIC (physical, link aggregation, etc). The virtual switch is
61  * VLAN-aware, i.e. it allows multiple MAC clients to be member
62  * of one or more VLANs, and the virtual switch will distribute
63  * multicast tagged packets only to the member of the corresponding
64  * VLANs.
65  *
66  * - Upper vs Lower MAC:
67  *
68  * Creating a VNIC on top of a MAC instance effectively causes
69  * two MAC instances to be layered on top of each other, one for
70  * the VNIC(s), one for the underlying MAC instance (physical NIC,
71  * link aggregation, etc). In the code below we refer to the
72  * underlying NIC as the "lower MAC", and we refer to VNICs as
73  * the "upper MAC".
74  *
75  * - Pass-through for VNICs:
76  *
77  * When VNICs are created on top of an underlying MAC, this causes
78  * a layering of two MAC instances. Since the lower MAC already
79  * does the switching and demultiplexing to its MAC clients, the
80  * upper MAC would simply have to pass packets to the layer below
81  * or above it, which would introduce overhead. In order to avoid
82  * this overhead, the MAC layer implements a pass-through mechanism
83  * for VNICs. When a VNIC opens the lower MAC instance, it saves
84  * the MAC client handle it optains from the MAC layer. When a MAC
85  * client opens a VNIC (upper MAC), the MAC layer detects that
86  * the MAC being opened is a VNIC, and gets the MAC client handle
87  * that the VNIC driver obtained from the lower MAC. This exchange
88  * is doing through a private capability between the MAC layer
89  * and the VNIC driver. The upper MAC then returns that handle
90  * directly to its MAC client. Any operation done by the upper
91  * MAC client is now done on the lower MAC client handle, which
92  * allows the VNIC driver to be completely bypassed for the
93  * performance sensitive data-path.
94  *
95  */
96 
97 #include <sys/types.h>
98 #include <sys/conf.h>
99 #include <sys/id_space.h>
100 #include <sys/esunddi.h>
101 #include <sys/stat.h>
102 #include <sys/mkdev.h>
103 #include <sys/stream.h>
104 #include <sys/strsun.h>
105 #include <sys/strsubr.h>
106 #include <sys/dlpi.h>
107 #include <sys/modhash.h>
108 #include <sys/mac_impl.h>
109 #include <sys/mac_client_impl.h>
110 #include <sys/mac_soft_ring.h>
111 #include <sys/dls.h>
112 #include <sys/dld.h>
113 #include <sys/modctl.h>
114 #include <sys/fs/dv_node.h>
115 #include <sys/thread.h>
116 #include <sys/proc.h>
117 #include <sys/callb.h>
118 #include <sys/cpuvar.h>
119 #include <sys/atomic.h>
120 #include <sys/sdt.h>
121 #include <sys/mac_flow.h>
122 #include <sys/ddi_intr_impl.h>
123 #include <sys/disp.h>
124 #include <sys/sdt.h>
125 #include <sys/vnic.h>
126 #include <sys/vnic_impl.h>
127 #include <sys/vlan.h>
128 #include <inet/ip.h>
129 #include <inet/ip6.h>
130 #include <sys/exacct.h>
131 #include <sys/exacct_impl.h>
132 #include <inet/nd.h>
133 #include <sys/ethernet.h>
134 
135 kmem_cache_t	*mac_client_impl_cache;
136 kmem_cache_t	*mac_promisc_impl_cache;
137 
138 static boolean_t mac_client_single_rcvr(mac_client_impl_t *);
139 static flow_entry_t *mac_client_swap_mciflent(mac_client_impl_t *);
140 static flow_entry_t *mac_client_get_flow(mac_client_impl_t *,
141     mac_unicast_impl_t *);
142 static void mac_client_remove_flow_from_list(mac_client_impl_t *,
143     flow_entry_t *);
144 static void mac_client_add_to_flow_list(mac_client_impl_t *, flow_entry_t *);
145 static void mac_rename_flow_names(mac_client_impl_t *, const char *);
146 static void mac_virtual_link_update(mac_impl_t *);
147 
148 /* ARGSUSED */
149 static int
150 i_mac_client_impl_ctor(void *buf, void *arg, int kmflag)
151 {
152 	int	i;
153 	mac_client_impl_t	*mcip = buf;
154 
155 	bzero(buf, MAC_CLIENT_IMPL_SIZE);
156 	mutex_init(&mcip->mci_tx_cb_lock, NULL, MUTEX_DRIVER, NULL);
157 	mcip->mci_tx_notify_cb_info.mcbi_lockp = &mcip->mci_tx_cb_lock;
158 
159 	ASSERT(mac_tx_percpu_cnt >= 0);
160 	for (i = 0; i <= mac_tx_percpu_cnt; i++) {
161 		mutex_init(&mcip->mci_tx_pcpu[i].pcpu_tx_lock, NULL,
162 		    MUTEX_DRIVER, NULL);
163 	}
164 	cv_init(&mcip->mci_tx_cv, NULL, CV_DRIVER, NULL);
165 
166 	return (0);
167 }
168 
169 /* ARGSUSED */
170 static void
171 i_mac_client_impl_dtor(void *buf, void *arg)
172 {
173 	int	i;
174 	mac_client_impl_t *mcip = buf;
175 
176 	ASSERT(mcip->mci_promisc_list == NULL);
177 	ASSERT(mcip->mci_unicast_list == NULL);
178 	ASSERT(mcip->mci_state_flags == 0);
179 	ASSERT(mcip->mci_tx_flag == 0);
180 
181 	mutex_destroy(&mcip->mci_tx_cb_lock);
182 
183 	ASSERT(mac_tx_percpu_cnt >= 0);
184 	for (i = 0; i <= mac_tx_percpu_cnt; i++) {
185 		ASSERT(mcip->mci_tx_pcpu[i].pcpu_tx_refcnt == 0);
186 		mutex_destroy(&mcip->mci_tx_pcpu[i].pcpu_tx_lock);
187 	}
188 	cv_destroy(&mcip->mci_tx_cv);
189 }
190 
191 /* ARGSUSED */
192 static int
193 i_mac_promisc_impl_ctor(void *buf, void *arg, int kmflag)
194 {
195 	mac_promisc_impl_t	*mpip = buf;
196 
197 	bzero(buf, sizeof (mac_promisc_impl_t));
198 	mpip->mpi_mci_link.mcb_objp = buf;
199 	mpip->mpi_mci_link.mcb_objsize = sizeof (mac_promisc_impl_t);
200 	mpip->mpi_mi_link.mcb_objp = buf;
201 	mpip->mpi_mi_link.mcb_objsize = sizeof (mac_promisc_impl_t);
202 	return (0);
203 }
204 
205 /* ARGSUSED */
206 static void
207 i_mac_promisc_impl_dtor(void *buf, void *arg)
208 {
209 	mac_promisc_impl_t	*mpip = buf;
210 
211 	ASSERT(mpip->mpi_mci_link.mcb_objp != NULL);
212 	ASSERT(mpip->mpi_mci_link.mcb_objsize == sizeof (mac_promisc_impl_t));
213 	ASSERT(mpip->mpi_mi_link.mcb_objp == mpip->mpi_mci_link.mcb_objp);
214 	ASSERT(mpip->mpi_mi_link.mcb_objsize == sizeof (mac_promisc_impl_t));
215 
216 	mpip->mpi_mci_link.mcb_objp = NULL;
217 	mpip->mpi_mci_link.mcb_objsize = 0;
218 	mpip->mpi_mi_link.mcb_objp = NULL;
219 	mpip->mpi_mi_link.mcb_objsize = 0;
220 
221 	ASSERT(mpip->mpi_mci_link.mcb_flags == 0);
222 	mpip->mpi_mci_link.mcb_objsize = 0;
223 }
224 
225 void
226 mac_client_init(void)
227 {
228 	ASSERT(mac_tx_percpu_cnt >= 0);
229 
230 	mac_client_impl_cache = kmem_cache_create("mac_client_impl_cache",
231 	    MAC_CLIENT_IMPL_SIZE, 0, i_mac_client_impl_ctor,
232 	    i_mac_client_impl_dtor, NULL, NULL, NULL, 0);
233 	ASSERT(mac_client_impl_cache != NULL);
234 
235 	mac_promisc_impl_cache = kmem_cache_create("mac_promisc_impl_cache",
236 	    sizeof (mac_promisc_impl_t), 0, i_mac_promisc_impl_ctor,
237 	    i_mac_promisc_impl_dtor, NULL, NULL, NULL, 0);
238 	ASSERT(mac_promisc_impl_cache != NULL);
239 }
240 
241 void
242 mac_client_fini(void)
243 {
244 	kmem_cache_destroy(mac_client_impl_cache);
245 	kmem_cache_destroy(mac_promisc_impl_cache);
246 }
247 
248 /*
249  * Return the lower MAC client handle from the VNIC driver for the
250  * specified VNIC MAC instance.
251  */
252 mac_client_impl_t *
253 mac_vnic_lower(mac_impl_t *mip)
254 {
255 	mac_capab_vnic_t cap;
256 	mac_client_impl_t *mcip;
257 
258 	VERIFY(i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_VNIC, &cap));
259 	mcip = cap.mcv_mac_client_handle(cap.mcv_arg);
260 
261 	return (mcip);
262 }
263 
264 /*
265  * Return the MAC client handle of the primary MAC client for the
266  * specified MAC instance, or NULL otherwise.
267  */
268 mac_client_impl_t *
269 mac_primary_client_handle(mac_impl_t *mip)
270 {
271 	mac_client_impl_t *mcip;
272 
273 	if (mip->mi_state_flags & MIS_IS_VNIC)
274 		return (mac_vnic_lower(mip));
275 
276 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
277 
278 	for (mcip = mip->mi_clients_list; mcip != NULL;
279 	    mcip = mcip->mci_client_next) {
280 		if (MCIP_DATAPATH_SETUP(mcip) && mac_is_primary_client(mcip))
281 			return (mcip);
282 	}
283 	return (NULL);
284 }
285 
286 /*
287  * Open a MAC specified by its MAC name.
288  */
289 int
290 mac_open(const char *macname, mac_handle_t *mhp)
291 {
292 	mac_impl_t	*mip;
293 	int		err;
294 
295 	/*
296 	 * Look up its entry in the global hash table.
297 	 */
298 	if ((err = mac_hold(macname, &mip)) != 0)
299 		return (err);
300 
301 	/*
302 	 * Hold the dip associated to the MAC to prevent it from being
303 	 * detached. For a softmac, its underlying dip is held by the
304 	 * mi_open() callback.
305 	 *
306 	 * This is done to be more tolerant with some defective drivers,
307 	 * which incorrectly handle mac_unregister() failure in their
308 	 * xxx_detach() routine. For example, some drivers ignore the
309 	 * failure of mac_unregister() and free all resources that
310 	 * that are needed for data transmition.
311 	 */
312 	e_ddi_hold_devi(mip->mi_dip);
313 
314 	if (!(mip->mi_callbacks->mc_callbacks & MC_OPEN)) {
315 		*mhp = (mac_handle_t)mip;
316 		return (0);
317 	}
318 
319 	/*
320 	 * The mac perimeter is used in both mac_open and mac_close by the
321 	 * framework to single thread the MC_OPEN/MC_CLOSE of drivers.
322 	 */
323 	i_mac_perim_enter(mip);
324 	mip->mi_oref++;
325 	if (mip->mi_oref != 1 || ((err = mip->mi_open(mip->mi_driver)) == 0)) {
326 		*mhp = (mac_handle_t)mip;
327 		i_mac_perim_exit(mip);
328 		return (0);
329 	}
330 	mip->mi_oref--;
331 	ddi_release_devi(mip->mi_dip);
332 	mac_rele(mip);
333 	i_mac_perim_exit(mip);
334 	return (err);
335 }
336 
337 /*
338  * Open a MAC specified by its linkid.
339  */
340 int
341 mac_open_by_linkid(datalink_id_t linkid, mac_handle_t *mhp)
342 {
343 	dls_dl_handle_t	dlh;
344 	int		err;
345 
346 	if ((err = dls_devnet_hold_tmp(linkid, &dlh)) != 0)
347 		return (err);
348 
349 	dls_devnet_prop_task_wait(dlh);
350 
351 	err = mac_open(dls_devnet_mac(dlh), mhp);
352 
353 	dls_devnet_rele_tmp(dlh);
354 	return (err);
355 }
356 
357 /*
358  * Open a MAC specified by its link name.
359  */
360 int
361 mac_open_by_linkname(const char *link, mac_handle_t *mhp)
362 {
363 	datalink_id_t	linkid;
364 	int		err;
365 
366 	if ((err = dls_mgmt_get_linkid(link, &linkid)) != 0)
367 		return (err);
368 	return (mac_open_by_linkid(linkid, mhp));
369 }
370 
371 /*
372  * Close the specified MAC.
373  */
374 void
375 mac_close(mac_handle_t mh)
376 {
377 	mac_impl_t	*mip = (mac_impl_t *)mh;
378 
379 	i_mac_perim_enter(mip);
380 	/*
381 	 * The mac perimeter is used in both mac_open and mac_close by the
382 	 * framework to single thread the MC_OPEN/MC_CLOSE of drivers.
383 	 */
384 	if (mip->mi_callbacks->mc_callbacks & MC_OPEN) {
385 		ASSERT(mip->mi_oref != 0);
386 		if (--mip->mi_oref == 0) {
387 			if ((mip->mi_callbacks->mc_callbacks & MC_CLOSE))
388 				mip->mi_close(mip->mi_driver);
389 		}
390 	}
391 	i_mac_perim_exit(mip);
392 	ddi_release_devi(mip->mi_dip);
393 	mac_rele(mip);
394 }
395 
396 /*
397  * Misc utility functions to retrieve various information about a MAC
398  * instance or a MAC client.
399  */
400 
401 const mac_info_t *
402 mac_info(mac_handle_t mh)
403 {
404 	return (&((mac_impl_t *)mh)->mi_info);
405 }
406 
407 dev_info_t *
408 mac_devinfo_get(mac_handle_t mh)
409 {
410 	return (((mac_impl_t *)mh)->mi_dip);
411 }
412 
413 void *
414 mac_driver(mac_handle_t mh)
415 {
416 	return (((mac_impl_t *)mh)->mi_driver);
417 }
418 
419 const char *
420 mac_name(mac_handle_t mh)
421 {
422 	return (((mac_impl_t *)mh)->mi_name);
423 }
424 
425 int
426 mac_type(mac_handle_t mh)
427 {
428 	return (((mac_impl_t *)mh)->mi_type->mt_type);
429 }
430 
431 char *
432 mac_client_name(mac_client_handle_t mch)
433 {
434 	return (((mac_client_impl_t *)mch)->mci_name);
435 }
436 
437 minor_t
438 mac_minor(mac_handle_t mh)
439 {
440 	return (((mac_impl_t *)mh)->mi_minor);
441 }
442 
443 /*
444  * Return the VID associated with a MAC client. This function should
445  * be called for clients which are associated with only one VID.
446  */
447 uint16_t
448 mac_client_vid(mac_client_handle_t mch)
449 {
450 	uint16_t		vid = VLAN_ID_NONE;
451 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
452 	flow_desc_t		flow_desc;
453 
454 	if (mcip->mci_nflents == 0)
455 		return (vid);
456 
457 	ASSERT(MCIP_DATAPATH_SETUP(mcip) && mac_client_single_rcvr(mcip));
458 
459 	mac_flow_get_desc(mcip->mci_flent, &flow_desc);
460 	if ((flow_desc.fd_mask & FLOW_LINK_VID) != 0)
461 		vid = flow_desc.fd_vid;
462 
463 	return (vid);
464 }
465 
466 /*
467  * Return whether the specified MAC client corresponds to a VLAN VNIC.
468  */
469 boolean_t
470 mac_client_is_vlan_vnic(mac_client_handle_t mch)
471 {
472 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
473 
474 	return (((mcip->mci_state_flags & MCIS_IS_VNIC) != 0) &&
475 	    ((mcip->mci_flent->fe_type & FLOW_PRIMARY_MAC) != 0));
476 }
477 
478 /*
479  * Return the link speed associated with the specified MAC client.
480  *
481  * The link speed of a MAC client is equal to the smallest value of
482  * 1) the current link speed of the underlying NIC, or
483  * 2) the bandwidth limit set for the MAC client.
484  *
485  * Note that the bandwidth limit can be higher than the speed
486  * of the underlying NIC. This is allowed to avoid spurious
487  * administration action failures or artifically lowering the
488  * bandwidth limit of a link that may  have temporarily lowered
489  * its link speed due to hardware problem or administrator action.
490  */
491 static uint64_t
492 mac_client_ifspeed(mac_client_impl_t *mcip)
493 {
494 	mac_impl_t *mip = mcip->mci_mip;
495 	uint64_t nic_speed;
496 
497 	nic_speed = mac_stat_get((mac_handle_t)mip, MAC_STAT_IFSPEED);
498 
499 	if (nic_speed == 0) {
500 		return (0);
501 	} else {
502 		uint64_t policy_limit = (uint64_t)-1;
503 
504 		if (MCIP_RESOURCE_PROPS_MASK(mcip) & MRP_MAXBW)
505 			policy_limit = MCIP_RESOURCE_PROPS_MAXBW(mcip);
506 
507 		return (MIN(policy_limit, nic_speed));
508 	}
509 }
510 
511 /*
512  * Return the link state of the specified client. If here are more
513  * than one clients of the underying mac_impl_t, the link state
514  * will always be UP regardless of the link state of the underlying
515  * mac_impl_t. This is needed to allow the MAC clients to continue
516  * to communicate with each other even when the physical link of
517  * their mac_impl_t is down.
518  */
519 static uint64_t
520 mac_client_link_state(mac_client_impl_t *mcip)
521 {
522 	mac_impl_t *mip = mcip->mci_mip;
523 	uint16_t vid;
524 	mac_client_impl_t *mci_list;
525 	mac_unicast_impl_t *mui_list, *oth_mui_list;
526 
527 	/*
528 	 * Returns LINK_STATE_UP if there are other MAC clients defined on
529 	 * mac_impl_t which share same VLAN ID as that of mcip. Note that
530 	 * if 'mcip' has more than one VID's then we match ANY one of the
531 	 * VID's with other MAC client's VID's and return LINK_STATE_UP.
532 	 */
533 	rw_enter(&mcip->mci_rw_lock, RW_READER);
534 	for (mui_list = mcip->mci_unicast_list; mui_list != NULL;
535 	    mui_list = mui_list->mui_next) {
536 		vid = mui_list->mui_vid;
537 		for (mci_list = mip->mi_clients_list; mci_list != NULL;
538 		    mci_list = mci_list->mci_client_next) {
539 			if (mci_list == mcip)
540 				continue;
541 			for (oth_mui_list = mci_list->mci_unicast_list;
542 			    oth_mui_list != NULL; oth_mui_list = oth_mui_list->
543 			    mui_next) {
544 				if (vid == oth_mui_list->mui_vid) {
545 					rw_exit(&mcip->mci_rw_lock);
546 					return (LINK_STATE_UP);
547 				}
548 			}
549 		}
550 	}
551 	rw_exit(&mcip->mci_rw_lock);
552 
553 	return (mac_stat_get((mac_handle_t)mip, MAC_STAT_LINK_STATE));
554 }
555 
556 /*
557  * Return the statistics of a MAC client. These statistics are different
558  * then the statistics of the underlying MAC which are returned by
559  * mac_stat_get().
560  */
561 uint64_t
562 mac_client_stat_get(mac_client_handle_t mch, uint_t stat)
563 {
564 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
565 	mac_impl_t *mip = mcip->mci_mip;
566 	uint64_t val;
567 
568 	switch (stat) {
569 	case MAC_STAT_LINK_STATE:
570 		val = mac_client_link_state(mcip);
571 		break;
572 	case MAC_STAT_LINK_UP:
573 		val = (mac_client_link_state(mcip) == LINK_STATE_UP);
574 		break;
575 	case MAC_STAT_PROMISC:
576 		val = mac_stat_get((mac_handle_t)mip, MAC_STAT_PROMISC);
577 		break;
578 	case MAC_STAT_LOWLINK_STATE:
579 		val = mac_stat_get((mac_handle_t)mip, MAC_STAT_LOWLINK_STATE);
580 		break;
581 	case MAC_STAT_IFSPEED:
582 		val = mac_client_ifspeed(mcip);
583 		break;
584 	case MAC_STAT_MULTIRCV:
585 		val = mcip->mci_stat_multircv;
586 		break;
587 	case MAC_STAT_BRDCSTRCV:
588 		val = mcip->mci_stat_brdcstrcv;
589 		break;
590 	case MAC_STAT_MULTIXMT:
591 		val = mcip->mci_stat_multixmt;
592 		break;
593 	case MAC_STAT_BRDCSTXMT:
594 		val = mcip->mci_stat_brdcstxmt;
595 		break;
596 	case MAC_STAT_OBYTES:
597 		val = mcip->mci_stat_obytes;
598 		break;
599 	case MAC_STAT_OPACKETS:
600 		val = mcip->mci_stat_opackets;
601 		break;
602 	case MAC_STAT_OERRORS:
603 		val = mcip->mci_stat_oerrors;
604 		break;
605 	case MAC_STAT_IPACKETS:
606 		val = mcip->mci_stat_ipackets;
607 		break;
608 	case MAC_STAT_RBYTES:
609 		val = mcip->mci_stat_ibytes;
610 		break;
611 	case MAC_STAT_IERRORS:
612 		val = mcip->mci_stat_ierrors;
613 		break;
614 	default:
615 		val = mac_stat_default(mip, stat);
616 		break;
617 	}
618 
619 	return (val);
620 }
621 
622 /*
623  * Return the statistics of the specified MAC instance.
624  */
625 uint64_t
626 mac_stat_get(mac_handle_t mh, uint_t stat)
627 {
628 	mac_impl_t	*mip = (mac_impl_t *)mh;
629 	uint64_t	val;
630 	int		ret;
631 
632 	/*
633 	 * The range of stat determines where it is maintained.  Stat
634 	 * values from 0 up to (but not including) MAC_STAT_MIN are
635 	 * mainteined by the mac module itself.  Everything else is
636 	 * maintained by the driver.
637 	 *
638 	 * If the mac_impl_t being queried corresponds to a VNIC,
639 	 * the stats need to be queried from the lower MAC client
640 	 * corresponding to the VNIC. (The mac_link_update()
641 	 * invoked by the driver to the lower MAC causes the *lower
642 	 * MAC* to update its mi_linkstate, and send a notification
643 	 * to its MAC clients. Due to the VNIC passthrough,
644 	 * these notifications are sent to the upper MAC clients
645 	 * of the VNIC directly, and the upper mac_impl_t of the VNIC
646 	 * does not have a valid mi_linkstate.
647 	 */
648 	if (stat < MAC_STAT_MIN && !(mip->mi_state_flags & MIS_IS_VNIC)) {
649 		/* these stats are maintained by the mac module itself */
650 		switch (stat) {
651 		case MAC_STAT_LINK_STATE:
652 			return (mip->mi_linkstate);
653 		case MAC_STAT_LINK_UP:
654 			return (mip->mi_linkstate == LINK_STATE_UP);
655 		case MAC_STAT_PROMISC:
656 			return (mip->mi_devpromisc != 0);
657 		case MAC_STAT_LOWLINK_STATE:
658 			return (mip->mi_lowlinkstate);
659 		default:
660 			ASSERT(B_FALSE);
661 		}
662 	}
663 
664 	/*
665 	 * Call the driver to get the given statistic.
666 	 */
667 	ret = mip->mi_getstat(mip->mi_driver, stat, &val);
668 	if (ret != 0) {
669 		/*
670 		 * The driver doesn't support this statistic.  Get the
671 		 * statistic's default value.
672 		 */
673 		val = mac_stat_default(mip, stat);
674 	}
675 	return (val);
676 }
677 
678 /*
679  * Utility function which returns the VID associated with a flow entry.
680  */
681 uint16_t
682 i_mac_flow_vid(flow_entry_t *flent)
683 {
684 	flow_desc_t	flow_desc;
685 
686 	mac_flow_get_desc(flent, &flow_desc);
687 
688 	if ((flow_desc.fd_mask & FLOW_LINK_VID) != 0)
689 		return (flow_desc.fd_vid);
690 	return (VLAN_ID_NONE);
691 }
692 
693 /*
694  * Verify the validity of the specified unicast MAC address. Returns B_TRUE
695  * if the address is valid, B_FALSE otherwise (multicast address, or incorrect
696  * length.
697  */
698 boolean_t
699 mac_unicst_verify(mac_handle_t mh, const uint8_t *addr, uint_t len)
700 {
701 	mac_impl_t	*mip = (mac_impl_t *)mh;
702 
703 	/*
704 	 * Verify the address. No lock is needed since mi_type and plugin
705 	 * details don't change after mac_register().
706 	 */
707 	if ((len != mip->mi_type->mt_addr_length) ||
708 	    (mip->mi_type->mt_ops.mtops_unicst_verify(addr,
709 	    mip->mi_pdata)) != 0) {
710 		return (B_FALSE);
711 	} else {
712 		return (B_TRUE);
713 	}
714 }
715 
716 void
717 mac_sdu_get(mac_handle_t mh, uint_t *min_sdu, uint_t *max_sdu)
718 {
719 	mac_impl_t	*mip = (mac_impl_t *)mh;
720 
721 	if (min_sdu != NULL)
722 		*min_sdu = mip->mi_sdu_min;
723 	if (max_sdu != NULL)
724 		*max_sdu = mip->mi_sdu_max;
725 }
726 
727 /*
728  * Update the MAC unicast address of the specified client's flows. Currently
729  * only one unicast MAC unicast address is allowed per client.
730  */
731 static void
732 mac_unicast_update_client_flow(mac_client_impl_t *mcip)
733 {
734 	mac_impl_t *mip = mcip->mci_mip;
735 	flow_entry_t *flent = mcip->mci_flent;
736 	mac_address_t *map = mcip->mci_unicast;
737 	flow_desc_t flow_desc;
738 
739 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
740 	ASSERT(flent != NULL);
741 
742 	mac_flow_get_desc(flent, &flow_desc);
743 	ASSERT(flow_desc.fd_mask & FLOW_LINK_DST);
744 
745 	bcopy(map->ma_addr, flow_desc.fd_dst_mac, map->ma_len);
746 	mac_flow_set_desc(flent, &flow_desc);
747 
748 	/*
749 	 * A MAC client could have one MAC address but multiple
750 	 * VLANs. In that case update the flow entries corresponding
751 	 * to all VLANs of the MAC client.
752 	 */
753 	for (flent = mcip->mci_flent_list; flent != NULL;
754 	    flent = flent->fe_client_next) {
755 		mac_flow_get_desc(flent, &flow_desc);
756 		if (!(flent->fe_type & FLOW_PRIMARY_MAC ||
757 		    flent->fe_type & FLOW_VNIC_MAC))
758 			continue;
759 
760 		bcopy(map->ma_addr, flow_desc.fd_dst_mac, map->ma_len);
761 		mac_flow_set_desc(flent, &flow_desc);
762 	}
763 }
764 
765 /*
766  * Update all clients that share the same unicast address.
767  */
768 void
769 mac_unicast_update_clients(mac_impl_t *mip, mac_address_t *map)
770 {
771 	mac_client_impl_t *mcip;
772 
773 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
774 
775 	/*
776 	 * Find all clients that share the same unicast MAC address and update
777 	 * them appropriately.
778 	 */
779 	for (mcip = mip->mi_clients_list; mcip != NULL;
780 	    mcip = mcip->mci_client_next) {
781 		/*
782 		 * Ignore clients that don't share this MAC address.
783 		 */
784 		if (map != mcip->mci_unicast)
785 			continue;
786 
787 		/*
788 		 * Update those clients with same old unicast MAC address.
789 		 */
790 		mac_unicast_update_client_flow(mcip);
791 	}
792 }
793 
794 /*
795  * Update the unicast MAC address of the specified VNIC MAC client.
796  *
797  * Check whether the operation is valid. Any of following cases should fail:
798  *
799  * 1. It's a VLAN type of VNIC.
800  * 2. The new value is current "primary" MAC address.
801  * 3. The current MAC address is shared with other clients.
802  * 4. The new MAC address has been used. This case will be valid when
803  *    client migration is fully supported.
804  */
805 int
806 mac_vnic_unicast_set(mac_client_handle_t mch, const uint8_t *addr)
807 {
808 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
809 	mac_impl_t *mip = mcip->mci_mip;
810 	mac_address_t *map = mcip->mci_unicast;
811 	int err;
812 
813 	ASSERT(!(mip->mi_state_flags & MIS_IS_VNIC));
814 	ASSERT(mcip->mci_state_flags & MCIS_IS_VNIC);
815 	ASSERT(mcip->mci_flags != MAC_CLIENT_FLAGS_PRIMARY);
816 
817 	i_mac_perim_enter(mip);
818 
819 	/*
820 	 * If this is a VLAN type of VNIC, it's using "primary" MAC address
821 	 * of the underlying interface. Must fail here. Refer to case 1 above.
822 	 */
823 	if (bcmp(map->ma_addr, mip->mi_addr, map->ma_len) == 0) {
824 		i_mac_perim_exit(mip);
825 		return (ENOTSUP);
826 	}
827 
828 	/*
829 	 * If the new address is the "primary" one, must fail. Refer to
830 	 * case 2 above.
831 	 */
832 	if (bcmp(addr, mip->mi_addr, map->ma_len) == 0) {
833 		i_mac_perim_exit(mip);
834 		return (EACCES);
835 	}
836 
837 	/*
838 	 * If the address is shared by multiple clients, must fail. Refer
839 	 * to case 3 above.
840 	 */
841 	if (mac_check_macaddr_shared(map)) {
842 		i_mac_perim_exit(mip);
843 		return (EBUSY);
844 	}
845 
846 	/*
847 	 * If the new address has been used, must fail for now. Refer to
848 	 * case 4 above.
849 	 */
850 	if (mac_find_macaddr(mip, (uint8_t *)addr) != NULL) {
851 		i_mac_perim_exit(mip);
852 		return (ENOTSUP);
853 	}
854 
855 	/*
856 	 * Update the MAC address.
857 	 */
858 	err = mac_update_macaddr(map, (uint8_t *)addr);
859 
860 	if (err != 0) {
861 		i_mac_perim_exit(mip);
862 		return (err);
863 	}
864 
865 	/*
866 	 * Update all flows of this MAC client.
867 	 */
868 	mac_unicast_update_client_flow(mcip);
869 
870 	i_mac_perim_exit(mip);
871 	return (0);
872 }
873 
874 /*
875  * Program the new primary unicast address of the specified MAC.
876  *
877  * Function mac_update_macaddr() takes care different types of underlying
878  * MAC. If the underlying MAC is VNIC, the VNIC driver must have registerd
879  * mi_unicst() entry point, that indirectly calls mac_vnic_unicast_set()
880  * which will take care of updating the MAC address of the corresponding
881  * MAC client.
882  *
883  * This is the only interface that allow the client to update the "primary"
884  * MAC address of the underlying MAC. The new value must have not been
885  * used by other clients.
886  */
887 int
888 mac_unicast_primary_set(mac_handle_t mh, const uint8_t *addr)
889 {
890 	mac_impl_t *mip = (mac_impl_t *)mh;
891 	mac_address_t *map;
892 	int err;
893 
894 	/* verify the address validity */
895 	if (!mac_unicst_verify(mh, addr, mip->mi_type->mt_addr_length))
896 		return (EINVAL);
897 
898 	i_mac_perim_enter(mip);
899 
900 	/*
901 	 * If the new value is the same as the current primary address value,
902 	 * there's nothing to do.
903 	 */
904 	if (bcmp(addr, mip->mi_addr, mip->mi_type->mt_addr_length) == 0) {
905 		i_mac_perim_exit(mip);
906 		return (0);
907 	}
908 
909 	if (mac_find_macaddr(mip, (uint8_t *)addr) != 0) {
910 		i_mac_perim_exit(mip);
911 		return (EBUSY);
912 	}
913 
914 	map = mac_find_macaddr(mip, mip->mi_addr);
915 	ASSERT(map != NULL);
916 
917 	/*
918 	 * Update the MAC address.
919 	 */
920 	if (mip->mi_state_flags & MIS_IS_AGGR) {
921 		mac_capab_aggr_t aggr_cap;
922 
923 		/*
924 		 * If the mac is an aggregation, other than the unicast
925 		 * addresses programming, aggr must be informed about this
926 		 * primary unicst address change to change its mac address
927 		 * policy to be user-specified.
928 		 */
929 		ASSERT(map->ma_type == MAC_ADDRESS_TYPE_UNICAST_CLASSIFIED);
930 		VERIFY(i_mac_capab_get(mh, MAC_CAPAB_AGGR, &aggr_cap));
931 		err = aggr_cap.mca_unicst(mip->mi_driver, addr);
932 		if (err == 0)
933 			bcopy(addr, map->ma_addr, map->ma_len);
934 	} else {
935 		err = mac_update_macaddr(map, (uint8_t *)addr);
936 	}
937 
938 	if (err != 0) {
939 		i_mac_perim_exit(mip);
940 		return (err);
941 	}
942 
943 	mac_unicast_update_clients(mip, map);
944 
945 	/*
946 	 * Save the new primary MAC address in mac_impl_t.
947 	 */
948 	bcopy(addr, mip->mi_addr, mip->mi_type->mt_addr_length);
949 
950 	i_mac_perim_exit(mip);
951 
952 	if (err == 0)
953 		i_mac_notify(mip, MAC_NOTE_UNICST);
954 
955 	return (err);
956 }
957 
958 /*
959  * Return the current primary MAC address of the specified MAC.
960  */
961 void
962 mac_unicast_primary_get(mac_handle_t mh, uint8_t *addr)
963 {
964 	mac_impl_t *mip = (mac_impl_t *)mh;
965 
966 	rw_enter(&mip->mi_rw_lock, RW_READER);
967 	bcopy(mip->mi_addr, addr, mip->mi_type->mt_addr_length);
968 	rw_exit(&mip->mi_rw_lock);
969 }
970 
971 /*
972  * Return information about the use of the primary MAC address of the
973  * specified MAC instance:
974  *
975  * - if client_name is non-NULL, it must point to a string of at
976  *   least MAXNAMELEN bytes, and will be set to the name of the MAC
977  *   client which uses the primary MAC address.
978  *
979  * - if in_use is non-NULL, used to return whether the primary MAC
980  *   address is currently in use.
981  */
982 void
983 mac_unicast_primary_info(mac_handle_t mh, char *client_name, boolean_t *in_use)
984 {
985 	mac_impl_t *mip = (mac_impl_t *)mh;
986 	mac_client_impl_t *cur_client;
987 
988 	if (in_use != NULL)
989 		*in_use = B_FALSE;
990 	if (client_name != NULL)
991 		bzero(client_name, MAXNAMELEN);
992 
993 	/*
994 	 * The mi_rw_lock is used to protect threads that don't hold the
995 	 * mac perimeter to get a consistent view of the mi_clients_list.
996 	 * Threads that modify the list must hold both the mac perimeter and
997 	 * mi_rw_lock(RW_WRITER)
998 	 */
999 	rw_enter(&mip->mi_rw_lock, RW_READER);
1000 	for (cur_client = mip->mi_clients_list; cur_client != NULL;
1001 	    cur_client = cur_client->mci_client_next) {
1002 		if (mac_is_primary_client(cur_client) ||
1003 		    (mip->mi_state_flags & MIS_IS_VNIC)) {
1004 			rw_exit(&mip->mi_rw_lock);
1005 			if (in_use != NULL)
1006 				*in_use = B_TRUE;
1007 			if (client_name != NULL) {
1008 				bcopy(cur_client->mci_name, client_name,
1009 				    MAXNAMELEN);
1010 			}
1011 			return;
1012 		}
1013 	}
1014 	rw_exit(&mip->mi_rw_lock);
1015 }
1016 
1017 /*
1018  * Return the current destination MAC address of the specified MAC.
1019  */
1020 boolean_t
1021 mac_dst_get(mac_handle_t mh, uint8_t *addr)
1022 {
1023 	mac_impl_t *mip = (mac_impl_t *)mh;
1024 
1025 	rw_enter(&mip->mi_rw_lock, RW_READER);
1026 	if (mip->mi_dstaddr_set)
1027 		bcopy(mip->mi_dstaddr, addr, mip->mi_type->mt_addr_length);
1028 	rw_exit(&mip->mi_rw_lock);
1029 	return (mip->mi_dstaddr_set);
1030 }
1031 
1032 /*
1033  * Add the specified MAC client to the list of clients which opened
1034  * the specified MAC.
1035  */
1036 static void
1037 mac_client_add(mac_client_impl_t *mcip)
1038 {
1039 	mac_impl_t *mip = mcip->mci_mip;
1040 
1041 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
1042 
1043 	/* add VNIC to the front of the list */
1044 	rw_enter(&mip->mi_rw_lock, RW_WRITER);
1045 	mcip->mci_client_next = mip->mi_clients_list;
1046 	mip->mi_clients_list = mcip;
1047 	mip->mi_nclients++;
1048 	rw_exit(&mip->mi_rw_lock);
1049 }
1050 
1051 /*
1052  * Remove the specified MAC client from the list of clients which opened
1053  * the specified MAC.
1054  */
1055 static void
1056 mac_client_remove(mac_client_impl_t *mcip)
1057 {
1058 	mac_impl_t *mip = mcip->mci_mip;
1059 	mac_client_impl_t **prev, *cclient;
1060 
1061 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
1062 
1063 	rw_enter(&mip->mi_rw_lock, RW_WRITER);
1064 	prev = &mip->mi_clients_list;
1065 	cclient = *prev;
1066 	while (cclient != NULL && cclient != mcip) {
1067 		prev = &cclient->mci_client_next;
1068 		cclient = *prev;
1069 	}
1070 	ASSERT(cclient != NULL);
1071 	*prev = cclient->mci_client_next;
1072 	mip->mi_nclients--;
1073 	rw_exit(&mip->mi_rw_lock);
1074 }
1075 
1076 static mac_unicast_impl_t *
1077 mac_client_find_vid(mac_client_impl_t *mcip, uint16_t vid)
1078 {
1079 	mac_unicast_impl_t *muip = mcip->mci_unicast_list;
1080 
1081 	while ((muip != NULL) && (muip->mui_vid != vid))
1082 		muip = muip->mui_next;
1083 
1084 	return (muip);
1085 }
1086 
1087 /*
1088  * Return whether the specified (MAC address, VID) tuple is already used by
1089  * one of the MAC clients associated with the specified MAC.
1090  */
1091 static boolean_t
1092 mac_addr_in_use(mac_impl_t *mip, uint8_t *mac_addr, uint16_t vid)
1093 {
1094 	mac_client_impl_t *client;
1095 	mac_address_t *map;
1096 
1097 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
1098 
1099 	for (client = mip->mi_clients_list; client != NULL;
1100 	    client = client->mci_client_next) {
1101 
1102 		/*
1103 		 * Ignore clients that don't have unicast address.
1104 		 */
1105 		if (client->mci_unicast_list == NULL)
1106 			continue;
1107 
1108 		map = client->mci_unicast;
1109 
1110 		if ((bcmp(mac_addr, map->ma_addr, map->ma_len) == 0) &&
1111 		    (mac_client_find_vid(client, vid) != NULL)) {
1112 			return (B_TRUE);
1113 		}
1114 	}
1115 
1116 	return (B_FALSE);
1117 }
1118 
1119 /*
1120  * Generate a random MAC address. The MAC address prefix is
1121  * stored in the array pointed to by mac_addr, and its length, in bytes,
1122  * is specified by prefix_len. The least significant bits
1123  * after prefix_len bytes are generated, and stored after the prefix
1124  * in the mac_addr array.
1125  */
1126 int
1127 mac_addr_random(mac_client_handle_t mch, uint_t prefix_len,
1128     uint8_t *mac_addr, mac_diag_t *diag)
1129 {
1130 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
1131 	mac_impl_t *mip = mcip->mci_mip;
1132 	size_t addr_len = mip->mi_type->mt_addr_length;
1133 
1134 	if (prefix_len >= addr_len) {
1135 		*diag = MAC_DIAG_MACPREFIXLEN_INVALID;
1136 		return (EINVAL);
1137 	}
1138 
1139 	/* check the prefix value */
1140 	if (prefix_len > 0) {
1141 		bzero(mac_addr + prefix_len, addr_len - prefix_len);
1142 		if (!mac_unicst_verify((mac_handle_t)mip, mac_addr,
1143 		    addr_len)) {
1144 			*diag = MAC_DIAG_MACPREFIX_INVALID;
1145 			return (EINVAL);
1146 		}
1147 	}
1148 
1149 	/* generate the MAC address */
1150 	if (prefix_len < addr_len) {
1151 		(void) random_get_pseudo_bytes(mac_addr +
1152 		    prefix_len, addr_len - prefix_len);
1153 	}
1154 
1155 	*diag = 0;
1156 	return (0);
1157 }
1158 
1159 /*
1160  * Set the priority range for this MAC client. This will be used to
1161  * determine the absolute priority for the threads created for this
1162  * MAC client using the specified "low", "medium" and "high" level.
1163  * This will also be used for any subflows on this MAC client.
1164  */
1165 #define	MAC_CLIENT_SET_PRIORITY_RANGE(mcip, pri) {			\
1166 	(mcip)->mci_min_pri = FLOW_MIN_PRIORITY(MINCLSYSPRI,	\
1167 	    MAXCLSYSPRI, (pri));					\
1168 	(mcip)->mci_max_pri = FLOW_MAX_PRIORITY(MINCLSYSPRI,	\
1169 	    MAXCLSYSPRI, (mcip)->mci_min_pri);				\
1170 	}
1171 
1172 /*
1173  * MAC client open entry point. Return a new MAC client handle. Each
1174  * MAC client is associated with a name, specified through the 'name'
1175  * argument.
1176  */
1177 int
1178 mac_client_open(mac_handle_t mh, mac_client_handle_t *mchp, char *name,
1179     uint16_t flags)
1180 {
1181 	mac_impl_t *mip = (mac_impl_t *)mh;
1182 	mac_client_impl_t *mcip;
1183 	int err = 0;
1184 	boolean_t share_desired =
1185 	    ((flags & MAC_OPEN_FLAGS_SHARES_DESIRED) != 0);
1186 	boolean_t no_hwrings = ((flags & MAC_OPEN_FLAGS_NO_HWRINGS) != 0);
1187 	boolean_t req_hwrings = ((flags & MAC_OPEN_FLAGS_REQ_HWRINGS) != 0);
1188 	flow_entry_t	*flent = NULL;
1189 
1190 	*mchp = NULL;
1191 	if (share_desired && no_hwrings) {
1192 		/* can't have shares but no hardware rings */
1193 		return (EINVAL);
1194 	}
1195 
1196 	i_mac_perim_enter(mip);
1197 
1198 	if (mip->mi_state_flags & MIS_IS_VNIC) {
1199 		/*
1200 		 * The underlying MAC is a VNIC. Return the MAC client
1201 		 * handle of the lower MAC which was obtained by
1202 		 * the VNIC driver when it did its mac_client_open().
1203 		 */
1204 
1205 		mcip = mac_vnic_lower(mip);
1206 
1207 		/*
1208 		 * Note that multiple mac clients share the same mcip in
1209 		 * this case.
1210 		 */
1211 		if (flags & MAC_OPEN_FLAGS_EXCLUSIVE)
1212 			mcip->mci_state_flags |= MCIS_EXCLUSIVE;
1213 
1214 		if (flags & MAC_OPEN_FLAGS_MULTI_PRIMARY)
1215 			mcip->mci_flags |= MAC_CLIENT_FLAGS_MULTI_PRIMARY;
1216 
1217 		mip->mi_clients_list = mcip;
1218 		i_mac_perim_exit(mip);
1219 		*mchp = (mac_client_handle_t)mcip;
1220 		return (err);
1221 	}
1222 
1223 	mcip = kmem_cache_alloc(mac_client_impl_cache, KM_SLEEP);
1224 
1225 	mcip->mci_mip = mip;
1226 	mcip->mci_upper_mip = NULL;
1227 	mcip->mci_rx_fn = mac_pkt_drop;
1228 	mcip->mci_rx_arg = NULL;
1229 	mcip->mci_rx_p_fn = NULL;
1230 	mcip->mci_rx_p_arg = NULL;
1231 	mcip->mci_p_unicast_list = NULL;
1232 	mcip->mci_direct_rx_fn = NULL;
1233 	mcip->mci_direct_rx_arg = NULL;
1234 
1235 	mcip->mci_unicast_list = NULL;
1236 
1237 	if ((flags & MAC_OPEN_FLAGS_IS_VNIC) != 0)
1238 		mcip->mci_state_flags |= MCIS_IS_VNIC;
1239 
1240 	if ((flags & MAC_OPEN_FLAGS_EXCLUSIVE) != 0)
1241 		mcip->mci_state_flags |= MCIS_EXCLUSIVE;
1242 
1243 	if ((flags & MAC_OPEN_FLAGS_IS_AGGR_PORT) != 0)
1244 		mcip->mci_state_flags |= MCIS_IS_AGGR_PORT;
1245 
1246 	if ((flags & MAC_OPEN_FLAGS_USE_DATALINK_NAME) != 0) {
1247 		datalink_id_t	linkid;
1248 
1249 		ASSERT(name == NULL);
1250 		if ((err = dls_devnet_macname2linkid(mip->mi_name,
1251 		    &linkid)) != 0) {
1252 			goto done;
1253 		}
1254 		if ((err = dls_mgmt_get_linkinfo(linkid, mcip->mci_name, NULL,
1255 		    NULL, NULL)) != 0) {
1256 			/*
1257 			 * Use mac name if dlmgmtd is not available.
1258 			 */
1259 			if (err == EBADF) {
1260 				(void) strlcpy(mcip->mci_name, mip->mi_name,
1261 				    sizeof (mcip->mci_name));
1262 				err = 0;
1263 			} else {
1264 				goto done;
1265 			}
1266 		}
1267 		mcip->mci_state_flags |= MCIS_USE_DATALINK_NAME;
1268 	} else {
1269 		ASSERT(name != NULL);
1270 		if (strlen(name) > MAXNAMELEN) {
1271 			err = EINVAL;
1272 			goto done;
1273 		}
1274 		(void) strlcpy(mcip->mci_name, name, sizeof (mcip->mci_name));
1275 	}
1276 
1277 	if (flags & MAC_OPEN_FLAGS_MULTI_PRIMARY)
1278 		mcip->mci_flags |= MAC_CLIENT_FLAGS_MULTI_PRIMARY;
1279 
1280 	/* the subflow table will be created dynamically */
1281 	mcip->mci_subflow_tab = NULL;
1282 	mcip->mci_stat_multircv = 0;
1283 	mcip->mci_stat_brdcstrcv = 0;
1284 	mcip->mci_stat_multixmt = 0;
1285 	mcip->mci_stat_brdcstxmt = 0;
1286 
1287 	mcip->mci_stat_obytes = 0;
1288 	mcip->mci_stat_opackets = 0;
1289 	mcip->mci_stat_oerrors = 0;
1290 	mcip->mci_stat_ibytes = 0;
1291 	mcip->mci_stat_ipackets = 0;
1292 	mcip->mci_stat_ierrors = 0;
1293 
1294 	/* Create an initial flow */
1295 
1296 	err = mac_flow_create(NULL, NULL, mcip->mci_name, NULL,
1297 	    mcip->mci_state_flags & MCIS_IS_VNIC ? FLOW_VNIC_MAC :
1298 	    FLOW_PRIMARY_MAC, &flent);
1299 	if (err != 0)
1300 		goto done;
1301 	mcip->mci_flent = flent;
1302 	FLOW_MARK(flent, FE_MC_NO_DATAPATH);
1303 	flent->fe_mcip = mcip;
1304 	/*
1305 	 * Place initial creation reference on the flow. This reference
1306 	 * is released in the corresponding delete action viz.
1307 	 * mac_unicast_remove after waiting for all transient refs to
1308 	 * to go away. The wait happens in mac_flow_wait.
1309 	 */
1310 	FLOW_REFHOLD(flent);
1311 
1312 	/*
1313 	 * Do this ahead of the mac_bcast_add() below so that the mi_nclients
1314 	 * will have the right value for mac_rx_srs_setup().
1315 	 */
1316 	mac_client_add(mcip);
1317 
1318 	if (no_hwrings)
1319 		mcip->mci_state_flags |= MCIS_NO_HWRINGS;
1320 	if (req_hwrings)
1321 		mcip->mci_state_flags |= MCIS_REQ_HWRINGS;
1322 	mcip->mci_share = NULL;
1323 	if (share_desired) {
1324 		ASSERT(!no_hwrings);
1325 		i_mac_share_alloc(mcip);
1326 	}
1327 
1328 	DTRACE_PROBE2(mac__client__open__allocated, mac_impl_t *,
1329 	    mcip->mci_mip, mac_client_impl_t *, mcip);
1330 	*mchp = (mac_client_handle_t)mcip;
1331 
1332 	i_mac_perim_exit(mip);
1333 	return (0);
1334 
1335 done:
1336 	i_mac_perim_exit(mip);
1337 	mcip->mci_state_flags = 0;
1338 	mcip->mci_tx_flag = 0;
1339 	kmem_cache_free(mac_client_impl_cache, mcip);
1340 	return (err);
1341 }
1342 
1343 /*
1344  * Close the specified MAC client handle.
1345  */
1346 void
1347 mac_client_close(mac_client_handle_t mch, uint16_t flags)
1348 {
1349 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
1350 	mac_impl_t		*mip = mcip->mci_mip;
1351 	flow_entry_t		*flent;
1352 
1353 	i_mac_perim_enter(mip);
1354 
1355 	if (flags & MAC_CLOSE_FLAGS_EXCLUSIVE)
1356 		mcip->mci_state_flags &= ~MCIS_EXCLUSIVE;
1357 
1358 	if ((mcip->mci_state_flags & MCIS_IS_VNIC) &&
1359 	    !(flags & MAC_CLOSE_FLAGS_IS_VNIC)) {
1360 		/*
1361 		 * This is an upper VNIC client initiated operation.
1362 		 * The lower MAC client will be closed by the VNIC driver
1363 		 * when the VNIC is deleted.
1364 		 */
1365 
1366 		i_mac_perim_exit(mip);
1367 		return;
1368 	}
1369 
1370 	/*
1371 	 * Remove the flent associated with the MAC client
1372 	 */
1373 	flent = mcip->mci_flent;
1374 	mcip->mci_flent = NULL;
1375 	FLOW_FINAL_REFRELE(flent);
1376 
1377 	/*
1378 	 * MAC clients must remove the unicast addresses and promisc callbacks
1379 	 * they added before issuing a mac_client_close().
1380 	 */
1381 	ASSERT(mcip->mci_unicast_list == NULL);
1382 	ASSERT(mcip->mci_promisc_list == NULL);
1383 	ASSERT(mcip->mci_tx_notify_cb_list == NULL);
1384 
1385 	i_mac_share_free(mcip);
1386 
1387 	mac_client_remove(mcip);
1388 
1389 	i_mac_perim_exit(mip);
1390 	mcip->mci_subflow_tab = NULL;
1391 	mcip->mci_state_flags = 0;
1392 	mcip->mci_tx_flag = 0;
1393 	kmem_cache_free(mac_client_impl_cache, mch);
1394 }
1395 
1396 /*
1397  * Set the rx bypass receive callback.
1398  */
1399 boolean_t
1400 mac_rx_bypass_set(mac_client_handle_t mch, mac_direct_rx_t rx_fn, void *arg1)
1401 {
1402 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
1403 	mac_impl_t		*mip = mcip->mci_mip;
1404 
1405 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
1406 
1407 	/*
1408 	 * If the mac_client is a VLAN, we should not do DLS bypass and
1409 	 * instead let the packets come up via mac_rx_deliver so the vlan
1410 	 * header can be stripped.
1411 	 */
1412 	if (mcip->mci_nvids > 0)
1413 		return (B_FALSE);
1414 
1415 	/*
1416 	 * These are not accessed directly in the data path, and hence
1417 	 * don't need any protection
1418 	 */
1419 	mcip->mci_direct_rx_fn = rx_fn;
1420 	mcip->mci_direct_rx_arg = arg1;
1421 	return (B_TRUE);
1422 }
1423 
1424 /*
1425  * Enable/Disable rx bypass. By default, bypass is assumed to be enabled.
1426  */
1427 void
1428 mac_rx_bypass_enable(mac_client_handle_t mch)
1429 {
1430 	((mac_client_impl_t *)mch)->mci_state_flags &= ~MCIS_RX_BYPASS_DISABLE;
1431 }
1432 
1433 void
1434 mac_rx_bypass_disable(mac_client_handle_t mch)
1435 {
1436 	((mac_client_impl_t *)mch)->mci_state_flags |= MCIS_RX_BYPASS_DISABLE;
1437 }
1438 
1439 /*
1440  * Set the receive callback for the specified MAC client. There can be
1441  * at most one such callback per MAC client.
1442  */
1443 void
1444 mac_rx_set(mac_client_handle_t mch, mac_rx_t rx_fn, void *arg)
1445 {
1446 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
1447 	mac_impl_t	*mip = mcip->mci_mip;
1448 
1449 	/*
1450 	 * Instead of adding an extra set of locks and refcnts in
1451 	 * the datapath at the mac client boundary, we temporarily quiesce
1452 	 * the SRS and related entities. We then change the receive function
1453 	 * without interference from any receive data thread and then reenable
1454 	 * the data flow subsequently.
1455 	 */
1456 	i_mac_perim_enter(mip);
1457 	mac_rx_client_quiesce(mch);
1458 
1459 	mcip->mci_rx_fn = rx_fn;
1460 	mcip->mci_rx_arg = arg;
1461 	mac_rx_client_restart(mch);
1462 	i_mac_perim_exit(mip);
1463 }
1464 
1465 /*
1466  * Reset the receive callback for the specified MAC client.
1467  */
1468 void
1469 mac_rx_clear(mac_client_handle_t mch)
1470 {
1471 	mac_rx_set(mch, mac_pkt_drop, NULL);
1472 }
1473 
1474 /*
1475  * Walk the MAC client subflow table and updates their priority values.
1476  */
1477 static int
1478 mac_update_subflow_priority_cb(flow_entry_t *flent, void *arg)
1479 {
1480 	mac_flow_update_priority(arg, flent);
1481 	return (0);
1482 }
1483 
1484 void
1485 mac_update_subflow_priority(mac_client_impl_t *mcip)
1486 {
1487 	(void) mac_flow_walk(mcip->mci_subflow_tab,
1488 	    mac_update_subflow_priority_cb, mcip);
1489 }
1490 
1491 /*
1492  * When the MAC client is being brought up (i.e. we do a unicast_add) we need
1493  * to initialize the cpu and resource control structure in the
1494  * mac_client_impl_t from the mac_impl_t (i.e if there are any cached
1495  * properties before the flow entry for the unicast address was created).
1496  */
1497 int
1498 mac_resource_ctl_set(mac_client_handle_t mch, mac_resource_props_t *mrp)
1499 {
1500 	mac_client_impl_t 	*mcip = (mac_client_impl_t *)mch;
1501 	mac_impl_t		*mip = (mac_impl_t *)mcip->mci_mip;
1502 	int			err = 0;
1503 
1504 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
1505 
1506 	err = mac_validate_props(mrp);
1507 	if (err != 0)
1508 		return (err);
1509 
1510 	mac_update_resources(mrp, MCIP_RESOURCE_PROPS(mcip), B_FALSE);
1511 	if (MCIP_DATAPATH_SETUP(mcip)) {
1512 		/*
1513 		 * We have to set this prior to calling mac_flow_modify.
1514 		 */
1515 		if (mrp->mrp_mask & MRP_PRIORITY) {
1516 			if (mrp->mrp_priority == MPL_RESET) {
1517 				MAC_CLIENT_SET_PRIORITY_RANGE(mcip,
1518 				    MPL_LINK_DEFAULT);
1519 			} else {
1520 				MAC_CLIENT_SET_PRIORITY_RANGE(mcip,
1521 				    mrp->mrp_priority);
1522 			}
1523 		}
1524 
1525 		mac_flow_modify(mip->mi_flow_tab, mcip->mci_flent, mrp);
1526 		if (mrp->mrp_mask & MRP_PRIORITY)
1527 			mac_update_subflow_priority(mcip);
1528 		return (0);
1529 	}
1530 	return (0);
1531 }
1532 
1533 void
1534 mac_resource_ctl_get(mac_client_handle_t mch, mac_resource_props_t *mrp)
1535 {
1536 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
1537 	mac_resource_props_t	*mcip_mrp = MCIP_RESOURCE_PROPS(mcip);
1538 
1539 	bcopy(mcip_mrp, mrp, sizeof (mac_resource_props_t));
1540 }
1541 
1542 static int
1543 mac_unicast_flow_create(mac_client_impl_t *mcip, uint8_t *mac_addr,
1544     uint16_t vid, boolean_t is_primary, boolean_t first_flow,
1545     flow_entry_t **flent, mac_resource_props_t *mrp)
1546 {
1547 	mac_impl_t	*mip = (mac_impl_t *)mcip->mci_mip;
1548 	flow_desc_t	flow_desc;
1549 	char		flowname[MAXFLOWNAMELEN];
1550 	int		err;
1551 	uint_t		flent_flags;
1552 
1553 	/*
1554 	 * First unicast address being added, create a new flow
1555 	 * for that MAC client.
1556 	 */
1557 	bzero(&flow_desc, sizeof (flow_desc));
1558 
1559 	flow_desc.fd_mac_len = mip->mi_type->mt_addr_length;
1560 	bcopy(mac_addr, flow_desc.fd_dst_mac, flow_desc.fd_mac_len);
1561 	flow_desc.fd_mask = FLOW_LINK_DST;
1562 	if (vid != 0) {
1563 		flow_desc.fd_vid = vid;
1564 		flow_desc.fd_mask |= FLOW_LINK_VID;
1565 	}
1566 
1567 	/*
1568 	 * XXX-nicolas. For now I'm keeping the FLOW_PRIMARY_MAC
1569 	 * and FLOW_VNIC. Even though they're a hack inherited
1570 	 * from the SRS code, we'll keep them for now. They're currently
1571 	 * consumed by mac_datapath_setup() to create the SRS.
1572 	 * That code should be eventually moved out of
1573 	 * mac_datapath_setup() and moved to a mac_srs_create()
1574 	 * function of some sort to keep things clean.
1575 	 *
1576 	 * Also, there's no reason why the SRS for the primary MAC
1577 	 * client should be different than any other MAC client. Until
1578 	 * this is cleaned-up, we support only one MAC unicast address
1579 	 * per client.
1580 	 *
1581 	 * We set FLOW_PRIMARY_MAC for the primary MAC address,
1582 	 * FLOW_VNIC for everything else.
1583 	 */
1584 	if (is_primary)
1585 		flent_flags = FLOW_PRIMARY_MAC;
1586 	else
1587 		flent_flags = FLOW_VNIC_MAC;
1588 
1589 	/*
1590 	 * For the first flow we use the mac client's name - mci_name, for
1591 	 * subsequent ones we just create a name with the vid. This is
1592 	 * so that we can add these flows to the same flow table. This is
1593 	 * fine as the flow name (except for the one with the mac client's
1594 	 * name) is not visible. When the first flow is removed, we just replace
1595 	 * its fdesc with another from the list, so we will still retain the
1596 	 * flent with the MAC client's flow name.
1597 	 */
1598 	if (first_flow) {
1599 		bcopy(mcip->mci_name, flowname, MAXFLOWNAMELEN);
1600 	} else {
1601 		(void) sprintf(flowname, "%s%u", mcip->mci_name, vid);
1602 		flent_flags = FLOW_NO_STATS;
1603 	}
1604 
1605 	if ((err = mac_flow_create(&flow_desc, mrp, flowname, NULL,
1606 	    flent_flags, flent)) != 0)
1607 		return (err);
1608 
1609 	FLOW_MARK(*flent, FE_INCIPIENT);
1610 	(*flent)->fe_mcip = mcip;
1611 
1612 	/*
1613 	 * Place initial creation reference on the flow. This reference
1614 	 * is released in the corresponding delete action viz.
1615 	 * mac_unicast_remove after waiting for all transient refs to
1616 	 * to go away. The wait happens in mac_flow_wait.
1617 	 * We have already held the reference in mac_client_open().
1618 	 */
1619 	if (!first_flow)
1620 		FLOW_REFHOLD(*flent);
1621 	return (0);
1622 }
1623 
1624 /* Refresh the multicast grouping for this VID. */
1625 int
1626 mac_client_update_mcast(void *arg, boolean_t add, const uint8_t *addrp)
1627 {
1628 	flow_entry_t		*flent = arg;
1629 	mac_client_impl_t	*mcip = flent->fe_mcip;
1630 	uint16_t		vid;
1631 	flow_desc_t		flow_desc;
1632 
1633 	mac_flow_get_desc(flent, &flow_desc);
1634 	vid = (flow_desc.fd_mask & FLOW_LINK_VID) != 0 ?
1635 	    flow_desc.fd_vid : VLAN_ID_NONE;
1636 
1637 	/*
1638 	 * We don't call mac_multicast_add()/mac_multicast_remove() as
1639 	 * we want to add/remove for this specific vid.
1640 	 */
1641 	if (add) {
1642 		return (mac_bcast_add(mcip, addrp, vid,
1643 		    MAC_ADDRTYPE_MULTICAST));
1644 	} else {
1645 		mac_bcast_delete(mcip, addrp, vid);
1646 		return (0);
1647 	}
1648 }
1649 
1650 static void
1651 mac_update_single_active_client(mac_impl_t *mip)
1652 {
1653 	mac_client_impl_t *client = NULL;
1654 
1655 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
1656 
1657 	rw_enter(&mip->mi_rw_lock, RW_WRITER);
1658 	if (mip->mi_nactiveclients == 1) {
1659 		/*
1660 		 * Find the one active MAC client from the list of MAC
1661 		 * clients. The active MAC client has at least one
1662 		 * unicast address.
1663 		 */
1664 		for (client = mip->mi_clients_list; client != NULL;
1665 		    client = client->mci_client_next) {
1666 			if (client->mci_unicast_list != NULL)
1667 				break;
1668 		}
1669 		ASSERT(client != NULL);
1670 	}
1671 
1672 	/*
1673 	 * mi_single_active_client is protected by the MAC impl's read/writer
1674 	 * lock, which allows mac_rx() to check the value of that pointer
1675 	 * as a reader.
1676 	 */
1677 	mip->mi_single_active_client = client;
1678 	rw_exit(&mip->mi_rw_lock);
1679 }
1680 
1681 /*
1682  * Set up the data path. Called from i_mac_unicast_add after having
1683  * done all the validations including making sure this is an active
1684  * client (i.e that is ready to process packets.)
1685  */
1686 static int
1687 mac_client_datapath_setup(mac_client_impl_t *mcip, uint16_t vid,
1688     uint8_t *mac_addr, mac_resource_props_t *mrp, boolean_t isprimary,
1689     mac_unicast_impl_t *muip)
1690 {
1691 	mac_impl_t	*mip = mcip->mci_mip;
1692 	boolean_t	mac_started = B_FALSE;
1693 	boolean_t	bcast_added = B_FALSE;
1694 	boolean_t	nactiveclients_added = B_FALSE;
1695 	flow_entry_t	*flent;
1696 	int		err = 0;
1697 
1698 	if ((err = mac_start((mac_handle_t)mip)) != 0)
1699 		goto bail;
1700 
1701 	mac_started = B_TRUE;
1702 
1703 	/* add the MAC client to the broadcast address group by default */
1704 	if (mip->mi_type->mt_brdcst_addr != NULL) {
1705 		err = mac_bcast_add(mcip, mip->mi_type->mt_brdcst_addr, vid,
1706 		    MAC_ADDRTYPE_BROADCAST);
1707 		if (err != 0)
1708 			goto bail;
1709 		bcast_added = B_TRUE;
1710 	}
1711 
1712 	/*
1713 	 * If this is the first unicast address addition for this
1714 	 * client, reuse the pre-allocated larval flow entry associated with
1715 	 * the MAC client.
1716 	 */
1717 	flent = (mcip->mci_nflents == 0) ? mcip->mci_flent : NULL;
1718 
1719 	/* We are configuring the unicast flow now */
1720 	if (!MCIP_DATAPATH_SETUP(mcip)) {
1721 
1722 		MAC_CLIENT_SET_PRIORITY_RANGE(mcip,
1723 		    (mrp->mrp_mask & MRP_PRIORITY) ? mrp->mrp_priority :
1724 		    MPL_LINK_DEFAULT);
1725 
1726 		if ((err = mac_unicast_flow_create(mcip, mac_addr, vid,
1727 		    isprimary, B_TRUE, &flent, mrp)) != 0)
1728 			goto bail;
1729 
1730 		mip->mi_nactiveclients++;
1731 		nactiveclients_added = B_TRUE;
1732 
1733 		/*
1734 		 * This will allocate the RX ring group if possible for the
1735 		 * flow and program the software classifier as needed.
1736 		 */
1737 		if ((err = mac_datapath_setup(mcip, flent, SRST_LINK)) != 0)
1738 			goto bail;
1739 
1740 		/*
1741 		 * The unicast MAC address must have been added successfully.
1742 		 */
1743 		ASSERT(mcip->mci_unicast != NULL);
1744 		/*
1745 		 * Push down the sub-flows that were defined on this link
1746 		 * hitherto. The flows are added to the active flow table
1747 		 * and SRS, softrings etc. are created as needed.
1748 		 */
1749 		mac_link_init_flows((mac_client_handle_t)mcip);
1750 	} else {
1751 		mac_address_t *map = mcip->mci_unicast;
1752 
1753 		/*
1754 		 * A unicast flow already exists for that MAC client,
1755 		 * this flow must be the same mac address but with
1756 		 * different VID. It has been checked by mac_addr_in_use().
1757 		 *
1758 		 * We will use the SRS etc. from the mci_flent. Note that
1759 		 * We don't need to create kstat for this as except for
1760 		 * the fdesc, everything will be used from in the 1st flent.
1761 		 */
1762 
1763 		if (bcmp(mac_addr, map->ma_addr, map->ma_len) != 0) {
1764 			err = EINVAL;
1765 			goto bail;
1766 		}
1767 
1768 		if ((err = mac_unicast_flow_create(mcip, mac_addr, vid,
1769 		    isprimary, B_FALSE, &flent, NULL)) != 0) {
1770 			goto bail;
1771 		}
1772 		if ((err = mac_flow_add(mip->mi_flow_tab, flent)) != 0) {
1773 			FLOW_FINAL_REFRELE(flent);
1774 			goto bail;
1775 		}
1776 
1777 		/* update the multicast group for this vid */
1778 		mac_client_bcast_refresh(mcip, mac_client_update_mcast,
1779 		    (void *)flent, B_TRUE);
1780 
1781 	}
1782 
1783 	/* populate the shared MAC address */
1784 	muip->mui_map = mcip->mci_unicast;
1785 
1786 	rw_enter(&mcip->mci_rw_lock, RW_WRITER);
1787 	muip->mui_next = mcip->mci_unicast_list;
1788 	mcip->mci_unicast_list = muip;
1789 	rw_exit(&mcip->mci_rw_lock);
1790 
1791 
1792 	/*
1793 	 * First add the flent to the flow list of this mcip. Then set
1794 	 * the mip's mi_single_active_client if needed. The Rx path assumes
1795 	 * that mip->mi_single_active_client will always have an associated
1796 	 * flent.
1797 	 */
1798 	mac_client_add_to_flow_list(mcip, flent);
1799 
1800 	if (nactiveclients_added)
1801 		mac_update_single_active_client(mip);
1802 	/*
1803 	 * Trigger a renegotiation of the capabilities when the number of
1804 	 * active clients changes from 1 to 2, since some of the capabilities
1805 	 * might have to be disabled. Also send a MAC_NOTE_LINK notification
1806 	 * to all the MAC clients whenever physical link is DOWN.
1807 	 */
1808 	if (mip->mi_nactiveclients == 2) {
1809 		mac_capab_update((mac_handle_t)mip);
1810 		mac_virtual_link_update(mip);
1811 	}
1812 	/*
1813 	 * Now that the setup is complete, clear the INCIPIENT flag.
1814 	 * The flag was set to avoid incoming packets seeing inconsistent
1815 	 * structures while the setup was in progress. Clear the mci_tx_flag
1816 	 * by calling mac_tx_client_block. It is possible that
1817 	 * mac_unicast_remove was called prior to this mac_unicast_add which
1818 	 * could have set the MCI_TX_QUIESCE flag.
1819 	 */
1820 	if (flent->fe_rx_ring_group != NULL)
1821 		mac_rx_group_unmark(flent->fe_rx_ring_group, MR_INCIPIENT);
1822 	FLOW_UNMARK(flent, FE_INCIPIENT);
1823 	FLOW_UNMARK(flent, FE_MC_NO_DATAPATH);
1824 	mac_tx_client_unblock(mcip);
1825 	return (0);
1826 bail:
1827 	if (bcast_added)
1828 		mac_bcast_delete(mcip, mip->mi_type->mt_brdcst_addr, vid);
1829 
1830 	if (nactiveclients_added)
1831 		mip->mi_nactiveclients--;
1832 
1833 	if (mac_started)
1834 		mac_stop((mac_handle_t)mip);
1835 
1836 	return (err);
1837 }
1838 
1839 /*
1840  * Return the passive primary MAC client, if present. The passive client is
1841  * a stand-by client that has the same unicast address as another that is
1842  * currenly active. Once the active client goes away, the passive client
1843  * becomes active.
1844  */
1845 static mac_client_impl_t *
1846 mac_get_passive_primary_client(mac_impl_t *mip)
1847 {
1848 	mac_client_impl_t	*mcip;
1849 
1850 	for (mcip = mip->mi_clients_list; mcip != NULL;
1851 	    mcip = mcip->mci_client_next) {
1852 		if (mac_is_primary_client(mcip) &&
1853 		    (mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) {
1854 			return (mcip);
1855 		}
1856 	}
1857 	return (NULL);
1858 }
1859 
1860 /*
1861  * Add a new unicast address to the MAC client.
1862  *
1863  * The MAC address can be specified either by value, or the MAC client
1864  * can specify that it wants to use the primary MAC address of the
1865  * underlying MAC. See the introductory comments at the beginning
1866  * of this file for more more information on primary MAC addresses.
1867  *
1868  * Note also the tuple (MAC address, VID) must be unique
1869  * for the MAC clients defined on top of the same underlying MAC
1870  * instance, unless the MAC_UNICAST_NODUPCHECK is specified.
1871  *
1872  * In no case can a client use the PVID for the MAC, if the MAC has one set.
1873  */
1874 int
1875 i_mac_unicast_add(mac_client_handle_t mch, uint8_t *mac_addr, uint16_t flags,
1876     mac_unicast_handle_t *mah, uint16_t vid, mac_diag_t *diag)
1877 {
1878 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
1879 	mac_impl_t		*mip = mcip->mci_mip;
1880 	int			err;
1881 	uint_t			mac_len = mip->mi_type->mt_addr_length;
1882 	boolean_t		check_dups = !(flags & MAC_UNICAST_NODUPCHECK);
1883 	boolean_t		fastpath_disabled = B_FALSE;
1884 	boolean_t		is_primary = (flags & MAC_UNICAST_PRIMARY);
1885 	boolean_t		is_unicast_hw = (flags & MAC_UNICAST_HW);
1886 	mac_resource_props_t	mrp;
1887 	boolean_t		passive_client = B_FALSE;
1888 	mac_unicast_impl_t	*muip;
1889 	boolean_t		is_vnic_primary =
1890 	    (flags & MAC_UNICAST_VNIC_PRIMARY);
1891 
1892 	/* when VID is non-zero, the underlying MAC can not be VNIC */
1893 	ASSERT(!((mip->mi_state_flags & MIS_IS_VNIC) && (vid != 0)));
1894 
1895 	/*
1896 	 * Check for an attempted use of the current Port VLAN ID, if enabled.
1897 	 * No client may use it.
1898 	 */
1899 	if (mip->mi_pvid != 0 && vid == mip->mi_pvid)
1900 		return (EBUSY);
1901 
1902 	/*
1903 	 * Check whether it's the primary client and flag it.
1904 	 */
1905 	if (!(mcip->mci_state_flags & MCIS_IS_VNIC) && is_primary && vid == 0)
1906 		mcip->mci_flags |= MAC_CLIENT_FLAGS_PRIMARY;
1907 
1908 	/*
1909 	 * is_vnic_primary is true when we come here as a VLAN VNIC
1910 	 * which uses the primary mac client's address but with a non-zero
1911 	 * VID. In this case the MAC address is not specified by an upper
1912 	 * MAC client.
1913 	 */
1914 	if ((mcip->mci_state_flags & MCIS_IS_VNIC) && is_primary &&
1915 	    !is_vnic_primary) {
1916 		/*
1917 		 * The address is being set by the upper MAC client
1918 		 * of a VNIC. The MAC address was already set by the
1919 		 * VNIC driver during VNIC creation.
1920 		 *
1921 		 * Note: a VNIC has only one MAC address. We return
1922 		 * the MAC unicast address handle of the lower MAC client
1923 		 * corresponding to the VNIC. We allocate a new entry
1924 		 * which is flagged appropriately, so that mac_unicast_remove()
1925 		 * doesn't attempt to free the original entry that
1926 		 * was allocated by the VNIC driver.
1927 		 */
1928 		ASSERT(mcip->mci_unicast != NULL);
1929 
1930 		/* Check for VLAN flags, if present */
1931 		if ((flags & MAC_UNICAST_TAG_DISABLE) != 0)
1932 			mcip->mci_state_flags |= MCIS_TAG_DISABLE;
1933 
1934 		if ((flags & MAC_UNICAST_STRIP_DISABLE) != 0)
1935 			mcip->mci_state_flags |= MCIS_STRIP_DISABLE;
1936 
1937 		if ((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) != 0)
1938 			mcip->mci_state_flags |= MCIS_DISABLE_TX_VID_CHECK;
1939 
1940 		/*
1941 		 * Ensure that the primary unicast address of the VNIC
1942 		 * is added only once unless we have the
1943 		 * MAC_CLIENT_FLAGS_MULTI_PRIMARY set (and this is not
1944 		 * a passive MAC client).
1945 		 */
1946 		if ((mcip->mci_flags & MAC_CLIENT_FLAGS_VNIC_PRIMARY) != 0) {
1947 			if ((mcip->mci_flags &
1948 			    MAC_CLIENT_FLAGS_MULTI_PRIMARY) == 0 ||
1949 			    (mcip->mci_flags &
1950 			    MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) {
1951 				return (EBUSY);
1952 			}
1953 			mcip->mci_flags |= MAC_CLIENT_FLAGS_PASSIVE_PRIMARY;
1954 			passive_client = B_TRUE;
1955 		}
1956 
1957 		mcip->mci_flags |= MAC_CLIENT_FLAGS_VNIC_PRIMARY;
1958 
1959 		/*
1960 		 * Create a handle for vid 0.
1961 		 */
1962 		ASSERT(vid == 0);
1963 		muip = kmem_zalloc(sizeof (mac_unicast_impl_t), KM_SLEEP);
1964 		muip->mui_vid = vid;
1965 		*mah = (mac_unicast_handle_t)muip;
1966 		/*
1967 		 * This will be used by the caller to defer setting the
1968 		 * rx functions.
1969 		 */
1970 		if (passive_client)
1971 			return (EAGAIN);
1972 		return (0);
1973 	}
1974 
1975 	/* primary MAC clients cannot be opened on top of anchor VNICs */
1976 	if ((is_vnic_primary || is_primary) &&
1977 	    i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_ANCHOR_VNIC, NULL)) {
1978 		return (ENXIO);
1979 	}
1980 
1981 	/*
1982 	 * If this is a VNIC/VLAN, disable softmac fast-path.
1983 	 */
1984 	if (mcip->mci_state_flags & MCIS_IS_VNIC) {
1985 		err = mac_fastpath_disable((mac_handle_t)mip);
1986 		if (err != 0)
1987 			return (err);
1988 		fastpath_disabled = B_TRUE;
1989 	}
1990 
1991 	/*
1992 	 * Return EBUSY if:
1993 	 *  - there is an exclusively active mac client exists.
1994 	 *  - this is an exclusive active mac client but
1995 	 *	a. there is already active mac clients exist, or
1996 	 *	b. fastpath streams are already plumbed on this legacy device
1997 	 *  - the mac creator has disallowed active mac clients.
1998 	 */
1999 	if (mip->mi_state_flags & (MIS_EXCLUSIVE|MIS_NO_ACTIVE)) {
2000 		if (fastpath_disabled)
2001 			mac_fastpath_enable((mac_handle_t)mip);
2002 		return (EBUSY);
2003 	}
2004 
2005 	if (mcip->mci_state_flags & MCIS_EXCLUSIVE) {
2006 		ASSERT(!fastpath_disabled);
2007 		if (mip->mi_nactiveclients != 0)
2008 			return (EBUSY);
2009 
2010 		if ((mip->mi_state_flags & MIS_LEGACY) &&
2011 		    !(mip->mi_capab_legacy.ml_active_set(mip->mi_driver))) {
2012 			return (EBUSY);
2013 		}
2014 		mip->mi_state_flags |= MIS_EXCLUSIVE;
2015 	}
2016 
2017 	bzero(&mrp, sizeof (mac_resource_props_t));
2018 	if (is_primary && !(mcip->mci_state_flags & (MCIS_IS_VNIC |
2019 	    MCIS_IS_AGGR_PORT))) {
2020 		/*
2021 		 * Apply the property cached in the mac_impl_t to the primary
2022 		 * mac client. If the mac client is a VNIC or an aggregation
2023 		 * port, its property should be set in the mcip when the
2024 		 * VNIC/aggr was created.
2025 		 */
2026 		mac_get_resources((mac_handle_t)mip, &mrp);
2027 		(void) mac_client_set_resources(mch, &mrp);
2028 	} else if (mcip->mci_state_flags & MCIS_IS_VNIC) {
2029 		bcopy(MCIP_RESOURCE_PROPS(mcip), &mrp,
2030 		    sizeof (mac_resource_props_t));
2031 	}
2032 
2033 	muip = kmem_zalloc(sizeof (mac_unicast_impl_t), KM_SLEEP);
2034 	muip->mui_vid = vid;
2035 
2036 	if (is_primary || is_vnic_primary) {
2037 		mac_addr = mip->mi_addr;
2038 	} else {
2039 
2040 		/*
2041 		 * Verify the validity of the specified MAC addresses value.
2042 		 */
2043 		if (!mac_unicst_verify((mac_handle_t)mip, mac_addr, mac_len)) {
2044 			*diag = MAC_DIAG_MACADDR_INVALID;
2045 			err = EINVAL;
2046 			goto bail_out;
2047 		}
2048 
2049 		/*
2050 		 * Make sure that the specified MAC address is different
2051 		 * than the unicast MAC address of the underlying NIC.
2052 		 */
2053 		if (check_dups && bcmp(mip->mi_addr, mac_addr, mac_len) == 0) {
2054 			*diag = MAC_DIAG_MACADDR_NIC;
2055 			err = EINVAL;
2056 			goto bail_out;
2057 		}
2058 	}
2059 
2060 	/*
2061 	 * Set the flags here so that if this is a passive client, we
2062 	 * can return  and set it when we call mac_client_datapath_setup
2063 	 * when this becomes the active client. If we defer to using these
2064 	 * flags to mac_client_datapath_setup, then for a passive client,
2065 	 * we'd have to store the flags somewhere (probably fe_flags)
2066 	 * and then use it.
2067 	 */
2068 	if (!MCIP_DATAPATH_SETUP(mcip)) {
2069 		if (is_unicast_hw) {
2070 			/*
2071 			 * The client requires a hardware MAC address slot
2072 			 * for that unicast address. Since we support only
2073 			 * one unicast MAC address per client, flag the
2074 			 * MAC client itself.
2075 			 */
2076 			mcip->mci_state_flags |= MCIS_UNICAST_HW;
2077 		}
2078 
2079 		/* Check for VLAN flags, if present */
2080 		if ((flags & MAC_UNICAST_TAG_DISABLE) != 0)
2081 			mcip->mci_state_flags |= MCIS_TAG_DISABLE;
2082 
2083 		if ((flags & MAC_UNICAST_STRIP_DISABLE) != 0)
2084 			mcip->mci_state_flags |= MCIS_STRIP_DISABLE;
2085 
2086 		if ((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) != 0)
2087 			mcip->mci_state_flags |= MCIS_DISABLE_TX_VID_CHECK;
2088 	} else {
2089 		/*
2090 		 * Assert that the specified flags are consistent with the
2091 		 * flags specified by previous calls to mac_unicast_add().
2092 		 */
2093 		ASSERT(((flags & MAC_UNICAST_TAG_DISABLE) != 0 &&
2094 		    (mcip->mci_state_flags & MCIS_TAG_DISABLE) != 0) ||
2095 		    ((flags & MAC_UNICAST_TAG_DISABLE) == 0 &&
2096 		    (mcip->mci_state_flags & MCIS_TAG_DISABLE) == 0));
2097 
2098 		ASSERT(((flags & MAC_UNICAST_STRIP_DISABLE) != 0 &&
2099 		    (mcip->mci_state_flags & MCIS_STRIP_DISABLE) != 0) ||
2100 		    ((flags & MAC_UNICAST_STRIP_DISABLE) == 0 &&
2101 		    (mcip->mci_state_flags & MCIS_STRIP_DISABLE) == 0));
2102 
2103 		ASSERT(((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) != 0 &&
2104 		    (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) != 0) ||
2105 		    ((flags & MAC_UNICAST_DISABLE_TX_VID_CHECK) == 0 &&
2106 		    (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK) == 0));
2107 
2108 		/*
2109 		 * Make sure the client is consistent about its requests
2110 		 * for MAC addresses. I.e. all requests from the clients
2111 		 * must have the MAC_UNICAST_HW flag set or clear.
2112 		 */
2113 		if ((mcip->mci_state_flags & MCIS_UNICAST_HW) != 0 &&
2114 		    !is_unicast_hw ||
2115 		    (mcip->mci_state_flags & MCIS_UNICAST_HW) == 0 &&
2116 		    is_unicast_hw) {
2117 			err = EINVAL;
2118 			goto bail_out;
2119 		}
2120 	}
2121 	/*
2122 	 * Make sure the MAC address is not already used by
2123 	 * another MAC client defined on top of the same
2124 	 * underlying NIC. Unless we have MAC_CLIENT_FLAGS_MULTI_PRIMARY
2125 	 * set when we allow a passive client to be present which will
2126 	 * be activated when the currently active client goes away - this
2127 	 * works only with primary addresses.
2128 	 */
2129 	if ((check_dups || is_primary || is_vnic_primary) &&
2130 	    mac_addr_in_use(mip, mac_addr, vid)) {
2131 		/*
2132 		 * Must have set the multiple primary address flag when
2133 		 * we did a mac_client_open AND this should be a primary
2134 		 * MAC client AND there should not already be a passive
2135 		 * primary. If all is true then we let this succeed
2136 		 * even if the address is a dup.
2137 		 */
2138 		if ((mcip->mci_flags & MAC_CLIENT_FLAGS_MULTI_PRIMARY) == 0 ||
2139 		    (mcip->mci_flags & MAC_CLIENT_FLAGS_PRIMARY) == 0 ||
2140 		    mac_get_passive_primary_client(mip) != NULL) {
2141 			*diag = MAC_DIAG_MACADDR_INUSE;
2142 			err = EEXIST;
2143 			goto bail_out;
2144 		}
2145 		ASSERT((mcip->mci_flags &
2146 		    MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) == 0);
2147 		mcip->mci_flags |= MAC_CLIENT_FLAGS_PASSIVE_PRIMARY;
2148 
2149 		/*
2150 		 * Stash the unicast address handle, we will use it when
2151 		 * we set up the passive client.
2152 		 */
2153 		mcip->mci_p_unicast_list = muip;
2154 		*mah = (mac_unicast_handle_t)muip;
2155 		return (0);
2156 	}
2157 
2158 	err = mac_client_datapath_setup(mcip, vid, mac_addr, &mrp,
2159 	    is_primary || is_vnic_primary, muip);
2160 	if (err != 0)
2161 		goto bail_out;
2162 	*mah = (mac_unicast_handle_t)muip;
2163 	return (0);
2164 
2165 bail_out:
2166 	if (fastpath_disabled)
2167 		mac_fastpath_enable((mac_handle_t)mip);
2168 	if (mcip->mci_state_flags & MCIS_EXCLUSIVE) {
2169 		mip->mi_state_flags &= ~MIS_EXCLUSIVE;
2170 		if (mip->mi_state_flags & MIS_LEGACY) {
2171 			mip->mi_capab_legacy.ml_active_clear(
2172 			    mip->mi_driver);
2173 		}
2174 	}
2175 	kmem_free(muip, sizeof (mac_unicast_impl_t));
2176 	return (err);
2177 }
2178 
2179 /*
2180  * Wrapper function to mac_unicast_add when we want to have the same mac
2181  * client open for two instances, one that is currently active and another
2182  * that will become active when the current one is removed. In this case
2183  * mac_unicast_add will return EGAIN and we will save the rx function and
2184  * arg which will be used when we activate the passive client in
2185  * mac_unicast_remove.
2186  */
2187 int
2188 mac_unicast_add_set_rx(mac_client_handle_t mch, uint8_t *mac_addr,
2189     uint16_t flags, mac_unicast_handle_t *mah,  uint16_t vid, mac_diag_t *diag,
2190     mac_rx_t rx_fn, void *arg)
2191 {
2192 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
2193 	uint_t			err;
2194 
2195 	err = mac_unicast_add(mch, mac_addr, flags, mah, vid, diag);
2196 	if (err != 0 && err != EAGAIN)
2197 		return (err);
2198 	if (err == EAGAIN) {
2199 		if (rx_fn != NULL) {
2200 			mcip->mci_rx_p_fn = rx_fn;
2201 			mcip->mci_rx_p_arg = arg;
2202 		}
2203 		return (0);
2204 	}
2205 	if (rx_fn != NULL)
2206 		mac_rx_set(mch, rx_fn, arg);
2207 	return (err);
2208 }
2209 
2210 int
2211 mac_unicast_add(mac_client_handle_t mch, uint8_t *mac_addr, uint16_t flags,
2212     mac_unicast_handle_t *mah, uint16_t vid, mac_diag_t *diag)
2213 {
2214 	mac_impl_t *mip = ((mac_client_impl_t *)mch)->mci_mip;
2215 	uint_t err;
2216 
2217 	i_mac_perim_enter(mip);
2218 	err = i_mac_unicast_add(mch, mac_addr, flags, mah, vid, diag);
2219 	i_mac_perim_exit(mip);
2220 
2221 	return (err);
2222 }
2223 
2224 void
2225 mac_client_datapath_teardown(mac_client_handle_t mch, mac_unicast_impl_t *muip,
2226     flow_entry_t *flent)
2227 {
2228 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
2229 	mac_impl_t		*mip = mcip->mci_mip;
2230 
2231 	/*
2232 	 * We would have initialized subflows etc. only if we brought up
2233 	 * the primary client and set the unicast unicast address etc.
2234 	 * Deactivate the flows. The flow entry will be removed from the
2235 	 * active flow tables, and the associated SRS, softrings etc will
2236 	 * be deleted. But the flow entry itself won't be destroyed, instead
2237 	 * it will continue to be archived off the  the global flow hash
2238 	 * list, for a possible future activation when say IP is plumbed
2239 	 * again.
2240 	 */
2241 	mac_link_release_flows(mch);
2242 
2243 	mip->mi_nactiveclients--;
2244 	mac_update_single_active_client(mip);
2245 
2246 	/* Tear down the data path */
2247 	mac_datapath_teardown(mcip, mcip->mci_flent, SRST_LINK);
2248 
2249 	/*
2250 	 * Prevent any future access to the flow entry through the mci_flent
2251 	 * pointer by setting the mci_flent to NULL. Access to mci_flent in
2252 	 * mac_bcast_send is also under mi_rw_lock.
2253 	 */
2254 	rw_enter(&mip->mi_rw_lock, RW_WRITER);
2255 	flent = mcip->mci_flent;
2256 	mac_client_remove_flow_from_list(mcip, flent);
2257 
2258 	if (mcip->mci_state_flags & MCIS_DESC_LOGGED)
2259 		mcip->mci_state_flags &= ~MCIS_DESC_LOGGED;
2260 
2261 	/*
2262 	 * This is the last unicast address being removed and there shouldn't
2263 	 * be any outbound data threads at this point coming down from mac
2264 	 * clients. We have waited for the data threads to finish before
2265 	 * starting dld_str_detach. Non-data threads must access TX SRS
2266 	 * under mi_rw_lock.
2267 	 */
2268 	rw_exit(&mip->mi_rw_lock);
2269 
2270 	/*
2271 	 * Don't use FLOW_MARK with FE_MC_NO_DATAPATH, as the flow might
2272 	 * contain other flags, such as FE_CONDEMNED, which we need to
2273 	 * cleared. We don't call mac_flow_cleanup() for this unicast
2274 	 * flow as we have a already cleaned up SRSs etc. (via the teadown
2275 	 * path). We just clear the stats and reset the initial callback
2276 	 * function, the rest will be set when we call mac_flow_create,
2277 	 * if at all.
2278 	 */
2279 	mutex_enter(&flent->fe_lock);
2280 	ASSERT(flent->fe_refcnt == 1 && flent->fe_mbg == NULL &&
2281 	    flent->fe_tx_srs == NULL && flent->fe_rx_srs_cnt == 0);
2282 	flent->fe_flags = FE_MC_NO_DATAPATH;
2283 	flow_stat_destroy(flent);
2284 
2285 	/* Initialize the receiver function to a safe routine */
2286 	flent->fe_cb_fn = (flow_fn_t)mac_pkt_drop;
2287 	flent->fe_cb_arg1 = NULL;
2288 	flent->fe_cb_arg2 = NULL;
2289 
2290 	flent->fe_index = -1;
2291 	mutex_exit(&flent->fe_lock);
2292 
2293 	if (mip->mi_type->mt_brdcst_addr != NULL) {
2294 		mac_bcast_delete(mcip, mip->mi_type->mt_brdcst_addr,
2295 		    muip->mui_vid);
2296 	}
2297 
2298 	if (mip->mi_nactiveclients == 1) {
2299 		mac_capab_update((mac_handle_t)mip);
2300 		mac_virtual_link_update(mip);
2301 	}
2302 
2303 	if (mcip->mci_state_flags & MCIS_EXCLUSIVE) {
2304 		mip->mi_state_flags &= ~MIS_EXCLUSIVE;
2305 
2306 		if (mip->mi_state_flags & MIS_LEGACY)
2307 			mip->mi_capab_legacy.ml_active_clear(mip->mi_driver);
2308 	}
2309 
2310 	mcip->mci_state_flags &= ~MCIS_UNICAST_HW;
2311 
2312 	if (mcip->mci_state_flags & MCIS_TAG_DISABLE)
2313 		mcip->mci_state_flags &= ~MCIS_TAG_DISABLE;
2314 
2315 	if (mcip->mci_state_flags & MCIS_STRIP_DISABLE)
2316 		mcip->mci_state_flags &= ~MCIS_STRIP_DISABLE;
2317 
2318 	if (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK)
2319 		mcip->mci_state_flags &= ~MCIS_DISABLE_TX_VID_CHECK;
2320 
2321 	kmem_free(muip, sizeof (mac_unicast_impl_t));
2322 
2323 	/*
2324 	 * Disable fastpath if this is a VNIC or a VLAN.
2325 	 */
2326 	if (mcip->mci_state_flags & MCIS_IS_VNIC)
2327 		mac_fastpath_enable((mac_handle_t)mip);
2328 	mac_stop((mac_handle_t)mip);
2329 }
2330 
2331 /*
2332  * Remove a MAC address which was previously added by mac_unicast_add().
2333  */
2334 int
2335 mac_unicast_remove(mac_client_handle_t mch, mac_unicast_handle_t mah)
2336 {
2337 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
2338 	mac_unicast_impl_t *muip = (mac_unicast_impl_t *)mah;
2339 	mac_unicast_impl_t *pre;
2340 	mac_impl_t *mip = mcip->mci_mip;
2341 	flow_entry_t		*flent;
2342 	boolean_t		isprimary = B_FALSE;
2343 
2344 	i_mac_perim_enter(mip);
2345 	if (mcip->mci_flags & MAC_CLIENT_FLAGS_VNIC_PRIMARY) {
2346 		/*
2347 		 * Called made by the upper MAC client of a VNIC.
2348 		 * There's nothing much to do, the unicast address will
2349 		 * be removed by the VNIC driver when the VNIC is deleted,
2350 		 * but let's ensure that all our transmit is done before
2351 		 * the client does a mac_client_stop lest it trigger an
2352 		 * assert in the driver.
2353 		 */
2354 		ASSERT(muip->mui_vid == 0);
2355 
2356 		mac_tx_client_flush(mcip);
2357 
2358 		if ((mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) {
2359 			mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PASSIVE_PRIMARY;
2360 			if (mcip->mci_rx_p_fn != NULL) {
2361 				mac_rx_set(mch, mcip->mci_rx_p_fn,
2362 				    mcip->mci_rx_p_arg);
2363 				mcip->mci_rx_p_fn = NULL;
2364 				mcip->mci_rx_p_arg = NULL;
2365 			}
2366 			kmem_free(muip, sizeof (mac_unicast_impl_t));
2367 			i_mac_perim_exit(mip);
2368 			return (0);
2369 		}
2370 		mcip->mci_flags &= ~MAC_CLIENT_FLAGS_VNIC_PRIMARY;
2371 
2372 		if (mcip->mci_state_flags & MCIS_TAG_DISABLE)
2373 			mcip->mci_state_flags &= ~MCIS_TAG_DISABLE;
2374 
2375 		if (mcip->mci_state_flags & MCIS_STRIP_DISABLE)
2376 			mcip->mci_state_flags &= ~MCIS_STRIP_DISABLE;
2377 
2378 		if (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK)
2379 			mcip->mci_state_flags &= ~MCIS_DISABLE_TX_VID_CHECK;
2380 
2381 		kmem_free(muip, sizeof (mac_unicast_impl_t));
2382 		i_mac_perim_exit(mip);
2383 		return (0);
2384 	}
2385 
2386 	ASSERT(muip != NULL);
2387 
2388 	/*
2389 	 * We are removing a passive client, we haven't setup the datapath
2390 	 * for this yet, so nothing much to do.
2391 	 */
2392 	if ((mcip->mci_flags & MAC_CLIENT_FLAGS_PASSIVE_PRIMARY) != 0) {
2393 
2394 		ASSERT((mcip->mci_flent->fe_flags & FE_MC_NO_DATAPATH) != 0);
2395 		ASSERT(mcip->mci_p_unicast_list == muip);
2396 
2397 		mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PASSIVE_PRIMARY;
2398 
2399 		mcip->mci_p_unicast_list = NULL;
2400 		mcip->mci_rx_p_fn = NULL;
2401 		mcip->mci_rx_p_arg = NULL;
2402 
2403 		mcip->mci_state_flags &= ~MCIS_UNICAST_HW;
2404 
2405 		if (mcip->mci_state_flags & MCIS_TAG_DISABLE)
2406 			mcip->mci_state_flags &= ~MCIS_TAG_DISABLE;
2407 
2408 		if (mcip->mci_state_flags & MCIS_STRIP_DISABLE)
2409 			mcip->mci_state_flags &= ~MCIS_STRIP_DISABLE;
2410 
2411 		if (mcip->mci_state_flags & MCIS_DISABLE_TX_VID_CHECK)
2412 			mcip->mci_state_flags &= ~MCIS_DISABLE_TX_VID_CHECK;
2413 
2414 		kmem_free(muip, sizeof (mac_unicast_impl_t));
2415 		i_mac_perim_exit(mip);
2416 		return (0);
2417 	}
2418 	/*
2419 	 * Remove the VID from the list of client's VIDs.
2420 	 */
2421 	pre = mcip->mci_unicast_list;
2422 	if (muip == pre) {
2423 		mcip->mci_unicast_list = muip->mui_next;
2424 	} else {
2425 		while ((pre->mui_next != NULL) && (pre->mui_next != muip))
2426 			pre = pre->mui_next;
2427 		ASSERT(pre->mui_next == muip);
2428 		rw_enter(&mcip->mci_rw_lock, RW_WRITER);
2429 		pre->mui_next = muip->mui_next;
2430 		rw_exit(&mcip->mci_rw_lock);
2431 	}
2432 
2433 	if ((mcip->mci_flags & MAC_CLIENT_FLAGS_PRIMARY) &&
2434 	    muip->mui_vid == 0) {
2435 		mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PRIMARY;
2436 		isprimary = B_TRUE;
2437 	}
2438 	if (!mac_client_single_rcvr(mcip)) {
2439 		/*
2440 		 * This MAC client is shared by more than one unicast
2441 		 * addresses, so we will just remove the flent
2442 		 * corresponding to the address being removed. We don't invoke
2443 		 * mac_rx_classify_flow_rem() since the additional flow is
2444 		 * not associated with its own separate set of SRS and rings,
2445 		 * and these constructs are still needed for the remaining
2446 		 * flows.
2447 		 */
2448 		flent = mac_client_get_flow(mcip, muip);
2449 		ASSERT(flent != NULL);
2450 
2451 		/*
2452 		 * The first one is disappearing, need to make sure
2453 		 * we replace it with another from the list of
2454 		 * shared clients.
2455 		 */
2456 		if (flent == mcip->mci_flent)
2457 			flent = mac_client_swap_mciflent(mcip);
2458 		mac_client_remove_flow_from_list(mcip, flent);
2459 		mac_flow_remove(mip->mi_flow_tab, flent, B_FALSE);
2460 		mac_flow_wait(flent, FLOW_DRIVER_UPCALL);
2461 
2462 		/*
2463 		 * The multicast groups that were added by the client so
2464 		 * far must be removed from the brodcast domain corresponding
2465 		 * to the VID being removed.
2466 		 */
2467 		mac_client_bcast_refresh(mcip, mac_client_update_mcast,
2468 		    (void *)flent, B_FALSE);
2469 
2470 		if (mip->mi_type->mt_brdcst_addr != NULL) {
2471 			mac_bcast_delete(mcip, mip->mi_type->mt_brdcst_addr,
2472 			    muip->mui_vid);
2473 		}
2474 
2475 		FLOW_FINAL_REFRELE(flent);
2476 		ASSERT(!(mcip->mci_state_flags & MCIS_EXCLUSIVE));
2477 		/*
2478 		 * Enable fastpath if this is a VNIC or a VLAN.
2479 		 */
2480 		if (mcip->mci_state_flags & MCIS_IS_VNIC)
2481 			mac_fastpath_enable((mac_handle_t)mip);
2482 		mac_stop((mac_handle_t)mip);
2483 		i_mac_perim_exit(mip);
2484 		return (0);
2485 	}
2486 
2487 	mac_client_datapath_teardown(mch, muip, flent);
2488 
2489 	/*
2490 	 * If we are removing the primary, check if we have a passive primary
2491 	 * client that we need to activate now.
2492 	 */
2493 	if (!isprimary) {
2494 		i_mac_perim_exit(mip);
2495 		return (0);
2496 	}
2497 	mcip = mac_get_passive_primary_client(mip);
2498 	if (mcip != NULL) {
2499 		mac_resource_props_t	mrp;
2500 		mac_unicast_impl_t	*muip;
2501 
2502 		mcip->mci_flags &= ~MAC_CLIENT_FLAGS_PASSIVE_PRIMARY;
2503 		bzero(&mrp, sizeof (mac_resource_props_t));
2504 		/*
2505 		 * Apply the property cached in the mac_impl_t to the
2506 		 * primary mac client.
2507 		 */
2508 		mac_get_resources((mac_handle_t)mip, &mrp);
2509 		(void) mac_client_set_resources(mch, &mrp);
2510 		ASSERT(mcip->mci_p_unicast_list != NULL);
2511 		muip = mcip->mci_p_unicast_list;
2512 		mcip->mci_p_unicast_list = NULL;
2513 		if (mac_client_datapath_setup(mcip, VLAN_ID_NONE,
2514 		    mip->mi_addr, &mrp, B_TRUE, muip) == 0) {
2515 			if (mcip->mci_rx_p_fn != NULL) {
2516 				mac_rx_set(mch, mcip->mci_rx_p_fn,
2517 				    mcip->mci_rx_p_arg);
2518 				mcip->mci_rx_p_fn = NULL;
2519 				mcip->mci_rx_p_arg = NULL;
2520 			}
2521 		} else {
2522 			kmem_free(muip, sizeof (mac_unicast_impl_t));
2523 		}
2524 	}
2525 	i_mac_perim_exit(mip);
2526 	return (0);
2527 }
2528 
2529 /*
2530  * Multicast add function invoked by MAC clients.
2531  */
2532 int
2533 mac_multicast_add(mac_client_handle_t mch, const uint8_t *addr)
2534 {
2535 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
2536 	mac_impl_t		*mip = mcip->mci_mip;
2537 	flow_entry_t		*flent = mcip->mci_flent_list;
2538 	flow_entry_t		*prev_fe = NULL;
2539 	uint16_t		vid;
2540 	int			err = 0;
2541 
2542 	/* Verify the address is a valid multicast address */
2543 	if ((err = mip->mi_type->mt_ops.mtops_multicst_verify(addr,
2544 	    mip->mi_pdata)) != 0)
2545 		return (err);
2546 
2547 	i_mac_perim_enter(mip);
2548 	while (flent != NULL) {
2549 		vid = i_mac_flow_vid(flent);
2550 
2551 		err = mac_bcast_add((mac_client_impl_t *)mch, addr, vid,
2552 		    MAC_ADDRTYPE_MULTICAST);
2553 		if (err != 0)
2554 			break;
2555 		prev_fe = flent;
2556 		flent = flent->fe_client_next;
2557 	}
2558 
2559 	/*
2560 	 * If we failed adding, then undo all, rather than partial
2561 	 * success.
2562 	 */
2563 	if (flent != NULL && prev_fe != NULL) {
2564 		flent = mcip->mci_flent_list;
2565 		while (flent != prev_fe->fe_client_next) {
2566 			vid = i_mac_flow_vid(flent);
2567 			mac_bcast_delete((mac_client_impl_t *)mch, addr, vid);
2568 			flent = flent->fe_client_next;
2569 		}
2570 	}
2571 	i_mac_perim_exit(mip);
2572 	return (err);
2573 }
2574 
2575 /*
2576  * Multicast delete function invoked by MAC clients.
2577  */
2578 void
2579 mac_multicast_remove(mac_client_handle_t mch, const uint8_t *addr)
2580 {
2581 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
2582 	mac_impl_t		*mip = mcip->mci_mip;
2583 	flow_entry_t		*flent;
2584 	uint16_t		vid;
2585 
2586 	i_mac_perim_enter(mip);
2587 	for (flent = mcip->mci_flent_list; flent != NULL;
2588 	    flent = flent->fe_client_next) {
2589 		vid = i_mac_flow_vid(flent);
2590 		mac_bcast_delete((mac_client_impl_t *)mch, addr, vid);
2591 	}
2592 	i_mac_perim_exit(mip);
2593 }
2594 
2595 /*
2596  * When a MAC client desires to capture packets on an interface,
2597  * it registers a promiscuous call back with mac_promisc_add().
2598  * There are three types of promiscuous callbacks:
2599  *
2600  * * MAC_CLIENT_PROMISC_ALL
2601  *   Captures all packets sent and received by the MAC client,
2602  *   the physical interface, as well as all other MAC clients
2603  *   defined on top of the same MAC.
2604  *
2605  * * MAC_CLIENT_PROMISC_FILTERED
2606  *   Captures all packets sent and received by the MAC client,
2607  *   plus all multicast traffic sent and received by the phyisical
2608  *   interface and the other MAC clients.
2609  *
2610  * * MAC_CLIENT_PROMISC_MULTI
2611  *   Captures all broadcast and multicast packets sent and
2612  *   received by the MAC clients as well as the physical interface.
2613  *
2614  * In all cases, the underlying MAC is put in promiscuous mode.
2615  */
2616 int
2617 mac_promisc_add(mac_client_handle_t mch, mac_client_promisc_type_t type,
2618     mac_rx_t fn, void *arg, mac_promisc_handle_t *mphp, uint16_t flags)
2619 {
2620 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
2621 	mac_impl_t *mip = mcip->mci_mip;
2622 	mac_promisc_impl_t *mpip;
2623 	mac_cb_info_t	*mcbi;
2624 	int rc;
2625 
2626 	i_mac_perim_enter(mip);
2627 
2628 	if ((rc = mac_start((mac_handle_t)mip)) != 0) {
2629 		i_mac_perim_exit(mip);
2630 		return (rc);
2631 	}
2632 
2633 	if ((mcip->mci_state_flags & MCIS_IS_VNIC) &&
2634 	    type == MAC_CLIENT_PROMISC_ALL) {
2635 		/*
2636 		 * The function is being invoked by the upper MAC client
2637 		 * of a VNIC. The VNIC should only see the traffic
2638 		 * it is entitled to.
2639 		 */
2640 		type = MAC_CLIENT_PROMISC_FILTERED;
2641 	}
2642 
2643 
2644 	/*
2645 	 * Turn on promiscuous mode for the underlying NIC.
2646 	 * This is needed even for filtered callbacks which
2647 	 * expect to receive all multicast traffic on the wire.
2648 	 *
2649 	 * Physical promiscuous mode should not be turned on if
2650 	 * MAC_PROMISC_FLAGS_NO_PHYS is set.
2651 	 */
2652 	if ((flags & MAC_PROMISC_FLAGS_NO_PHYS) == 0) {
2653 		if ((rc = i_mac_promisc_set(mip, B_TRUE)) != 0) {
2654 			mac_stop((mac_handle_t)mip);
2655 			i_mac_perim_exit(mip);
2656 			return (rc);
2657 		}
2658 	}
2659 
2660 	mpip = kmem_cache_alloc(mac_promisc_impl_cache, KM_SLEEP);
2661 
2662 	mpip->mpi_type = type;
2663 	mpip->mpi_fn = fn;
2664 	mpip->mpi_arg = arg;
2665 	mpip->mpi_mcip = mcip;
2666 	mpip->mpi_no_tx_loop = ((flags & MAC_PROMISC_FLAGS_NO_TX_LOOP) != 0);
2667 	mpip->mpi_no_phys = ((flags & MAC_PROMISC_FLAGS_NO_PHYS) != 0);
2668 	mpip->mpi_strip_vlan_tag =
2669 	    ((flags & MAC_PROMISC_FLAGS_VLAN_TAG_STRIP) != 0);
2670 	mpip->mpi_no_copy = ((flags & MAC_PROMISC_FLAGS_NO_COPY) != 0);
2671 
2672 	mcbi = &mip->mi_promisc_cb_info;
2673 	mutex_enter(mcbi->mcbi_lockp);
2674 
2675 	mac_callback_add(&mip->mi_promisc_cb_info, &mcip->mci_promisc_list,
2676 	    &mpip->mpi_mci_link);
2677 	mac_callback_add(&mip->mi_promisc_cb_info, &mip->mi_promisc_list,
2678 	    &mpip->mpi_mi_link);
2679 
2680 	mutex_exit(mcbi->mcbi_lockp);
2681 
2682 	*mphp = (mac_promisc_handle_t)mpip;
2683 	i_mac_perim_exit(mip);
2684 	return (0);
2685 }
2686 
2687 /*
2688  * Remove a multicast address previously aded through mac_promisc_add().
2689  */
2690 void
2691 mac_promisc_remove(mac_promisc_handle_t mph)
2692 {
2693 	mac_promisc_impl_t *mpip = (mac_promisc_impl_t *)mph;
2694 	mac_client_impl_t *mcip = mpip->mpi_mcip;
2695 	mac_impl_t *mip = mcip->mci_mip;
2696 	mac_cb_info_t *mcbi;
2697 	int rv;
2698 
2699 	i_mac_perim_enter(mip);
2700 
2701 	/*
2702 	 * Even if the device can't be reset into normal mode, we still
2703 	 * need to clear the client promisc callbacks. The client may want
2704 	 * to close the mac end point and we can't have stale callbacks.
2705 	 */
2706 	if (!(mpip->mpi_no_phys)) {
2707 		if ((rv = i_mac_promisc_set(mip, B_FALSE)) != 0) {
2708 			cmn_err(CE_WARN, "%s: failed to switch OFF promiscuous"
2709 			    " mode because of error 0x%x", mip->mi_name, rv);
2710 		}
2711 	}
2712 	mcbi = &mip->mi_promisc_cb_info;
2713 	mutex_enter(mcbi->mcbi_lockp);
2714 	if (mac_callback_remove(mcbi, &mip->mi_promisc_list,
2715 	    &mpip->mpi_mi_link)) {
2716 		VERIFY(mac_callback_remove(&mip->mi_promisc_cb_info,
2717 		    &mcip->mci_promisc_list, &mpip->mpi_mci_link));
2718 		kmem_cache_free(mac_promisc_impl_cache, mpip);
2719 	} else {
2720 		mac_callback_remove_wait(&mip->mi_promisc_cb_info);
2721 	}
2722 	mutex_exit(mcbi->mcbi_lockp);
2723 	mac_stop((mac_handle_t)mip);
2724 
2725 	i_mac_perim_exit(mip);
2726 }
2727 
2728 /*
2729  * Reference count the number of active Tx threads. MCI_TX_QUIESCE indicates
2730  * that a control operation wants to quiesce the Tx data flow in which case
2731  * we return an error. Holding any of the per cpu locks ensures that the
2732  * mci_tx_flag won't change.
2733  *
2734  * 'CPU' must be accessed just once and used to compute the index into the
2735  * percpu array, and that index must be used for the entire duration of the
2736  * packet send operation. Note that the thread may be preempted and run on
2737  * another cpu any time and so we can't use 'CPU' more than once for the
2738  * operation.
2739  */
2740 #define	MAC_TX_TRY_HOLD(mcip, mytx, error)				\
2741 {									\
2742 	(error) = 0;							\
2743 	(mytx) = &(mcip)->mci_tx_pcpu[CPU->cpu_seqid & mac_tx_percpu_cnt]; \
2744 	mutex_enter(&(mytx)->pcpu_tx_lock);				\
2745 	if (!((mcip)->mci_tx_flag & MCI_TX_QUIESCE)) {			\
2746 		(mytx)->pcpu_tx_refcnt++;				\
2747 	} else {							\
2748 		(error) = -1;						\
2749 	}								\
2750 	mutex_exit(&(mytx)->pcpu_tx_lock);				\
2751 }
2752 
2753 /*
2754  * Release the reference. If needed, signal any control operation waiting
2755  * for Tx quiescence. The wait and signal are always done using the
2756  * mci_tx_pcpu[0]'s lock
2757  */
2758 #define	MAC_TX_RELE(mcip, mytx) {					\
2759 	mutex_enter(&(mytx)->pcpu_tx_lock);				\
2760 	if (--(mytx)->pcpu_tx_refcnt == 0 &&				\
2761 	    (mcip)->mci_tx_flag & MCI_TX_QUIESCE) {			\
2762 		mutex_exit(&(mytx)->pcpu_tx_lock);			\
2763 		mutex_enter(&(mcip)->mci_tx_pcpu[0].pcpu_tx_lock);	\
2764 		cv_signal(&(mcip)->mci_tx_cv);				\
2765 		mutex_exit(&(mcip)->mci_tx_pcpu[0].pcpu_tx_lock);	\
2766 	} else {							\
2767 		mutex_exit(&(mytx)->pcpu_tx_lock);			\
2768 	}								\
2769 }
2770 
2771 /*
2772  * Bump the count of the number of active Tx threads. This is maintained as
2773  * a per CPU counter. On (CMT kind of) machines with large number of CPUs,
2774  * a single mci_tx_lock may become contended. However a count of the total
2775  * number of Tx threads per client is needed in order to quiesce the Tx side
2776  * prior to reassigning a Tx ring dynamically to another client. The thread
2777  * that needs to quiesce the Tx traffic grabs all the percpu locks and checks
2778  * the sum of the individual percpu refcnts. Each Tx data thread only grabs
2779  * its own percpu lock and increments its own refcnt.
2780  */
2781 void *
2782 mac_tx_hold(mac_client_handle_t mch)
2783 {
2784 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
2785 	mac_tx_percpu_t	*mytx;
2786 	int error;
2787 
2788 	MAC_TX_TRY_HOLD(mcip, mytx, error);
2789 	return (error == 0 ? (void *)mytx : NULL);
2790 }
2791 
2792 void
2793 mac_tx_rele(mac_client_handle_t mch, void *mytx_handle)
2794 {
2795 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
2796 	mac_tx_percpu_t	*mytx = mytx_handle;
2797 
2798 	MAC_TX_RELE(mcip, mytx)
2799 }
2800 
2801 /*
2802  * Send function invoked by MAC clients.
2803  */
2804 mac_tx_cookie_t
2805 mac_tx(mac_client_handle_t mch, mblk_t *mp_chain, uintptr_t hint,
2806     uint16_t flag, mblk_t **ret_mp)
2807 {
2808 	mac_tx_cookie_t		cookie = NULL;
2809 	int			error;
2810 	mac_tx_percpu_t		*mytx;
2811 	mac_soft_ring_set_t	*srs;
2812 	flow_entry_t		*flent;
2813 	boolean_t		is_subflow = B_FALSE;
2814 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
2815 	mac_impl_t		*mip = mcip->mci_mip;
2816 	mac_srs_tx_t		*srs_tx;
2817 
2818 	/*
2819 	 * Check whether the active Tx threads count is bumped already.
2820 	 */
2821 	if (!(flag & MAC_TX_NO_HOLD)) {
2822 		MAC_TX_TRY_HOLD(mcip, mytx, error);
2823 		if (error != 0) {
2824 			freemsgchain(mp_chain);
2825 			return (NULL);
2826 		}
2827 	}
2828 
2829 	/*
2830 	 * If mac protection is enabled, only the permissible packets will be
2831 	 * returned by mac_protect_check().
2832 	 */
2833 	if ((mcip->mci_flent->
2834 	    fe_resource_props.mrp_mask & MRP_PROTECT) != 0 &&
2835 	    (mp_chain = mac_protect_check(mch, mp_chain)) == NULL)
2836 		goto done;
2837 
2838 	if (mcip->mci_subflow_tab != NULL &&
2839 	    mcip->mci_subflow_tab->ft_flow_count > 0 &&
2840 	    mac_flow_lookup(mcip->mci_subflow_tab, mp_chain,
2841 	    FLOW_OUTBOUND, &flent) == 0) {
2842 		/*
2843 		 * The main assumption here is that if in the event
2844 		 * we get a chain, all the packets will be classified
2845 		 * to the same Flow/SRS. If this changes for any
2846 		 * reason, the following logic should change as well.
2847 		 * I suppose the fanout_hint also assumes this .
2848 		 */
2849 		ASSERT(flent != NULL);
2850 		is_subflow = B_TRUE;
2851 	} else {
2852 		flent = mcip->mci_flent;
2853 	}
2854 
2855 	srs = flent->fe_tx_srs;
2856 	/*
2857 	 * This is to avoid panics with PF_PACKET that can call mac_tx()
2858 	 * against an interface that is not capable of sending. A rewrite
2859 	 * of the mac datapath is required to remove this limitation.
2860 	 */
2861 	if (srs == NULL) {
2862 		freemsgchain(mp_chain);
2863 		goto done;
2864 	}
2865 
2866 	srs_tx = &srs->srs_tx;
2867 	if (srs_tx->st_mode == SRS_TX_DEFAULT &&
2868 	    (srs->srs_state & SRS_ENQUEUED) == 0 &&
2869 	    mip->mi_nactiveclients == 1 && mip->mi_promisc_list == NULL &&
2870 	    mp_chain->b_next == NULL) {
2871 		uint64_t	obytes;
2872 
2873 		/*
2874 		 * Since dls always opens the underlying MAC, nclients equals
2875 		 * to 1 means that the only active client is dls itself acting
2876 		 * as a primary client of the MAC instance. Since dls will not
2877 		 * send tagged packets in that case, and dls is trusted to send
2878 		 * packets for its allowed VLAN(s), the VLAN tag insertion and
2879 		 * check is required only if nclients is greater than 1.
2880 		 */
2881 		if (mip->mi_nclients > 1) {
2882 			if (MAC_VID_CHECK_NEEDED(mcip)) {
2883 				int	err = 0;
2884 
2885 				MAC_VID_CHECK(mcip, mp_chain, err);
2886 				if (err != 0) {
2887 					freemsg(mp_chain);
2888 					mcip->mci_stat_oerrors++;
2889 					goto done;
2890 				}
2891 			}
2892 			if (MAC_TAG_NEEDED(mcip)) {
2893 				mp_chain = mac_add_vlan_tag(mp_chain, 0,
2894 				    mac_client_vid(mch));
2895 				if (mp_chain == NULL) {
2896 					mcip->mci_stat_oerrors++;
2897 					goto done;
2898 				}
2899 			}
2900 		}
2901 
2902 		obytes = (mp_chain->b_cont == NULL ? MBLKL(mp_chain) :
2903 		    msgdsize(mp_chain));
2904 
2905 		MAC_TX(mip, srs_tx->st_arg2, mp_chain,
2906 		    ((mcip->mci_state_flags & MCIS_SHARE_BOUND) != 0));
2907 
2908 		if (mp_chain == NULL) {
2909 			cookie = NULL;
2910 			mcip->mci_stat_obytes += obytes;
2911 			mcip->mci_stat_opackets += 1;
2912 			if ((srs->srs_type & SRST_FLOW) != 0) {
2913 				FLOW_STAT_UPDATE(flent, obytes, obytes);
2914 				FLOW_STAT_UPDATE(flent, opackets, 1);
2915 			}
2916 		} else {
2917 			mutex_enter(&srs->srs_lock);
2918 			cookie = mac_tx_srs_no_desc(srs, mp_chain,
2919 			    flag, ret_mp);
2920 			mutex_exit(&srs->srs_lock);
2921 		}
2922 	} else {
2923 		cookie = srs_tx->st_func(srs, mp_chain, hint, flag, ret_mp);
2924 	}
2925 
2926 done:
2927 	if (is_subflow)
2928 		FLOW_REFRELE(flent);
2929 
2930 	if (!(flag & MAC_TX_NO_HOLD))
2931 		MAC_TX_RELE(mcip, mytx);
2932 
2933 	return (cookie);
2934 }
2935 
2936 /*
2937  * mac_tx_is_blocked
2938  *
2939  * Given a cookie, it returns if the ring identified by the cookie is
2940  * flow-controlled or not. If NULL is passed in place of a cookie,
2941  * then it finds out if any of the underlying rings belonging to the
2942  * SRS is flow controlled or not and returns that status.
2943  */
2944 /* ARGSUSED */
2945 boolean_t
2946 mac_tx_is_flow_blocked(mac_client_handle_t mch, mac_tx_cookie_t cookie)
2947 {
2948 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
2949 	mac_soft_ring_set_t *mac_srs;
2950 	mac_soft_ring_t *sringp;
2951 	boolean_t blocked = B_FALSE;
2952 	mac_tx_percpu_t *mytx;
2953 	int err;
2954 	int i;
2955 
2956 	/*
2957 	 * Bump the reference count so that mac_srs won't be deleted.
2958 	 * If the client is currently quiesced and we failed to bump
2959 	 * the reference, return B_TRUE so that flow control stays
2960 	 * as enabled.
2961 	 *
2962 	 * Flow control will then be disabled once the client is no
2963 	 * longer quiesced.
2964 	 */
2965 	MAC_TX_TRY_HOLD(mcip, mytx, err);
2966 	if (err != 0)
2967 		return (B_TRUE);
2968 
2969 	if ((mac_srs = MCIP_TX_SRS(mcip)) == NULL) {
2970 		MAC_TX_RELE(mcip, mytx);
2971 		return (B_FALSE);
2972 	}
2973 
2974 	mutex_enter(&mac_srs->srs_lock);
2975 	if (mac_srs->srs_tx.st_mode == SRS_TX_FANOUT) {
2976 		if (cookie != NULL) {
2977 			sringp = (mac_soft_ring_t *)cookie;
2978 			mutex_enter(&sringp->s_ring_lock);
2979 			if (sringp->s_ring_state & S_RING_TX_HIWAT)
2980 				blocked = B_TRUE;
2981 			mutex_exit(&sringp->s_ring_lock);
2982 		} else {
2983 			for (i = 0; i < mac_srs->srs_oth_ring_count; i++) {
2984 				sringp = mac_srs->srs_oth_soft_rings[i];
2985 				mutex_enter(&sringp->s_ring_lock);
2986 				if (sringp->s_ring_state & S_RING_TX_HIWAT) {
2987 					blocked = B_TRUE;
2988 					mutex_exit(&sringp->s_ring_lock);
2989 					break;
2990 				}
2991 				mutex_exit(&sringp->s_ring_lock);
2992 			}
2993 		}
2994 	} else {
2995 		blocked = (mac_srs->srs_state & SRS_TX_HIWAT);
2996 	}
2997 	mutex_exit(&mac_srs->srs_lock);
2998 	MAC_TX_RELE(mcip, mytx);
2999 	return (blocked);
3000 }
3001 
3002 /*
3003  * Check if the MAC client is the primary MAC client.
3004  */
3005 boolean_t
3006 mac_is_primary_client(mac_client_impl_t *mcip)
3007 {
3008 	return (mcip->mci_flags & MAC_CLIENT_FLAGS_PRIMARY);
3009 }
3010 
3011 void
3012 mac_ioctl(mac_handle_t mh, queue_t *wq, mblk_t *bp)
3013 {
3014 	mac_impl_t	*mip = (mac_impl_t *)mh;
3015 	int cmd = ((struct iocblk *)bp->b_rptr)->ioc_cmd;
3016 
3017 	if ((cmd == ND_GET && (mip->mi_callbacks->mc_callbacks & MC_GETPROP)) ||
3018 	    (cmd == ND_SET && (mip->mi_callbacks->mc_callbacks & MC_SETPROP))) {
3019 		/*
3020 		 * If ndd props were registered, call them.
3021 		 * Note that ndd ioctls are Obsolete
3022 		 */
3023 		mac_ndd_ioctl(mip, wq, bp);
3024 		return;
3025 	}
3026 
3027 	/*
3028 	 * Call the driver to handle the ioctl.  The driver may not support
3029 	 * any ioctls, in which case we reply with a NAK on its behalf.
3030 	 */
3031 	if (mip->mi_callbacks->mc_callbacks & MC_IOCTL)
3032 		mip->mi_ioctl(mip->mi_driver, wq, bp);
3033 	else
3034 		miocnak(wq, bp, 0, EINVAL);
3035 }
3036 
3037 /*
3038  * Return the link state of the specified MAC instance.
3039  */
3040 link_state_t
3041 mac_link_get(mac_handle_t mh)
3042 {
3043 	return (((mac_impl_t *)mh)->mi_linkstate);
3044 }
3045 
3046 /*
3047  * Add a mac client specified notification callback. Please see the comments
3048  * above mac_callback_add() for general information about mac callback
3049  * addition/deletion in the presence of mac callback list walkers
3050  */
3051 mac_notify_handle_t
3052 mac_notify_add(mac_handle_t mh, mac_notify_t notify_fn, void *arg)
3053 {
3054 	mac_impl_t		*mip = (mac_impl_t *)mh;
3055 	mac_notify_cb_t		*mncb;
3056 	mac_cb_info_t		*mcbi;
3057 
3058 	/*
3059 	 * Allocate a notify callback structure, fill in the details and
3060 	 * use the mac callback list manipulation functions to chain into
3061 	 * the list of callbacks.
3062 	 */
3063 	mncb = kmem_zalloc(sizeof (mac_notify_cb_t), KM_SLEEP);
3064 	mncb->mncb_fn = notify_fn;
3065 	mncb->mncb_arg = arg;
3066 	mncb->mncb_mip = mip;
3067 	mncb->mncb_link.mcb_objp = mncb;
3068 	mncb->mncb_link.mcb_objsize = sizeof (mac_notify_cb_t);
3069 	mncb->mncb_link.mcb_flags = MCB_NOTIFY_CB_T;
3070 
3071 	mcbi = &mip->mi_notify_cb_info;
3072 
3073 	i_mac_perim_enter(mip);
3074 	mutex_enter(mcbi->mcbi_lockp);
3075 
3076 	mac_callback_add(&mip->mi_notify_cb_info, &mip->mi_notify_cb_list,
3077 	    &mncb->mncb_link);
3078 
3079 	mutex_exit(mcbi->mcbi_lockp);
3080 	i_mac_perim_exit(mip);
3081 	return ((mac_notify_handle_t)mncb);
3082 }
3083 
3084 void
3085 mac_notify_remove_wait(mac_handle_t mh)
3086 {
3087 	mac_impl_t	*mip = (mac_impl_t *)mh;
3088 	mac_cb_info_t	*mcbi = &mip->mi_notify_cb_info;
3089 
3090 	mutex_enter(mcbi->mcbi_lockp);
3091 	mac_callback_remove_wait(&mip->mi_notify_cb_info);
3092 	mutex_exit(mcbi->mcbi_lockp);
3093 }
3094 
3095 /*
3096  * Remove a mac client specified notification callback
3097  */
3098 int
3099 mac_notify_remove(mac_notify_handle_t mnh, boolean_t wait)
3100 {
3101 	mac_notify_cb_t	*mncb = (mac_notify_cb_t *)mnh;
3102 	mac_impl_t	*mip = mncb->mncb_mip;
3103 	mac_cb_info_t	*mcbi;
3104 	int		err = 0;
3105 
3106 	mcbi = &mip->mi_notify_cb_info;
3107 
3108 	i_mac_perim_enter(mip);
3109 	mutex_enter(mcbi->mcbi_lockp);
3110 
3111 	ASSERT(mncb->mncb_link.mcb_objp == mncb);
3112 	/*
3113 	 * If there aren't any list walkers, the remove would succeed
3114 	 * inline, else we wait for the deferred remove to complete
3115 	 */
3116 	if (mac_callback_remove(&mip->mi_notify_cb_info,
3117 	    &mip->mi_notify_cb_list, &mncb->mncb_link)) {
3118 		kmem_free(mncb, sizeof (mac_notify_cb_t));
3119 	} else {
3120 		err = EBUSY;
3121 	}
3122 
3123 	mutex_exit(mcbi->mcbi_lockp);
3124 	i_mac_perim_exit(mip);
3125 
3126 	/*
3127 	 * If we failed to remove the notification callback and "wait" is set
3128 	 * to be B_TRUE, wait for the callback to finish after we exit the
3129 	 * mac perimeter.
3130 	 */
3131 	if (err != 0 && wait) {
3132 		mac_notify_remove_wait((mac_handle_t)mip);
3133 		return (0);
3134 	}
3135 
3136 	return (err);
3137 }
3138 
3139 /*
3140  * Associate resource management callbacks with the specified MAC
3141  * clients.
3142  */
3143 
3144 void
3145 mac_resource_set_common(mac_client_handle_t mch, mac_resource_add_t add,
3146     mac_resource_remove_t remove, mac_resource_quiesce_t quiesce,
3147     mac_resource_restart_t restart, mac_resource_bind_t bind,
3148     void *arg)
3149 {
3150 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
3151 
3152 	mcip->mci_resource_add = add;
3153 	mcip->mci_resource_remove = remove;
3154 	mcip->mci_resource_quiesce = quiesce;
3155 	mcip->mci_resource_restart = restart;
3156 	mcip->mci_resource_bind = bind;
3157 	mcip->mci_resource_arg = arg;
3158 }
3159 
3160 void
3161 mac_resource_set(mac_client_handle_t mch, mac_resource_add_t add, void *arg)
3162 {
3163 	/* update the 'resource_add' callback */
3164 	mac_resource_set_common(mch, add, NULL, NULL, NULL, NULL, arg);
3165 }
3166 
3167 /*
3168  * Sets up the client resources and enable the polling interface over all the
3169  * SRS's and the soft rings of the client
3170  */
3171 void
3172 mac_client_poll_enable(mac_client_handle_t mch)
3173 {
3174 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
3175 	mac_soft_ring_set_t	*mac_srs;
3176 	flow_entry_t		*flent;
3177 	int			i;
3178 
3179 	flent = mcip->mci_flent;
3180 	ASSERT(flent != NULL);
3181 
3182 	mcip->mci_state_flags |= MCIS_CLIENT_POLL_CAPABLE;
3183 	for (i = 0; i < flent->fe_rx_srs_cnt; i++) {
3184 		mac_srs = (mac_soft_ring_set_t *)flent->fe_rx_srs[i];
3185 		ASSERT(mac_srs->srs_mcip == mcip);
3186 		mac_srs_client_poll_enable(mcip, mac_srs);
3187 	}
3188 }
3189 
3190 /*
3191  * Tears down the client resources and disable the polling interface over all
3192  * the SRS's and the soft rings of the client
3193  */
3194 void
3195 mac_client_poll_disable(mac_client_handle_t mch)
3196 {
3197 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
3198 	mac_soft_ring_set_t	*mac_srs;
3199 	flow_entry_t		*flent;
3200 	int			i;
3201 
3202 	flent = mcip->mci_flent;
3203 	ASSERT(flent != NULL);
3204 
3205 	mcip->mci_state_flags &= ~MCIS_CLIENT_POLL_CAPABLE;
3206 	for (i = 0; i < flent->fe_rx_srs_cnt; i++) {
3207 		mac_srs = (mac_soft_ring_set_t *)flent->fe_rx_srs[i];
3208 		ASSERT(mac_srs->srs_mcip == mcip);
3209 		mac_srs_client_poll_disable(mcip, mac_srs);
3210 	}
3211 }
3212 
3213 /*
3214  * Associate the CPUs specified by the given property with a MAC client.
3215  */
3216 int
3217 mac_cpu_set(mac_client_handle_t mch, mac_resource_props_t *mrp)
3218 {
3219 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
3220 	mac_impl_t *mip = mcip->mci_mip;
3221 	int err = 0;
3222 
3223 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
3224 
3225 	if ((err = mac_validate_props(mrp)) != 0)
3226 		return (err);
3227 
3228 	if (MCIP_DATAPATH_SETUP(mcip))
3229 		mac_flow_modify(mip->mi_flow_tab, mcip->mci_flent, mrp);
3230 
3231 	mac_update_resources(mrp, MCIP_RESOURCE_PROPS(mcip), B_FALSE);
3232 	return (0);
3233 }
3234 
3235 /*
3236  * Apply the specified properties to the specified MAC client.
3237  */
3238 int
3239 mac_client_set_resources(mac_client_handle_t mch, mac_resource_props_t *mrp)
3240 {
3241 	mac_client_impl_t *mcip = (mac_client_impl_t *)mch;
3242 	mac_impl_t *mip = mcip->mci_mip;
3243 	int err = 0;
3244 
3245 	i_mac_perim_enter(mip);
3246 
3247 	if ((mrp->mrp_mask & MRP_MAXBW) || (mrp->mrp_mask & MRP_PRIORITY)) {
3248 		err = mac_resource_ctl_set(mch, mrp);
3249 		if (err != 0)
3250 			goto done;
3251 	}
3252 
3253 	if (mrp->mrp_mask & MRP_CPUS) {
3254 		err = mac_cpu_set(mch, mrp);
3255 		if (err != 0)
3256 			goto done;
3257 	}
3258 
3259 	if (mrp->mrp_mask & MRP_PROTECT)
3260 		err = mac_protect_set(mch, mrp);
3261 
3262 done:
3263 	i_mac_perim_exit(mip);
3264 	return (err);
3265 }
3266 
3267 /*
3268  * Return the properties currently associated with the specified MAC client.
3269  */
3270 void
3271 mac_client_get_resources(mac_client_handle_t mch, mac_resource_props_t *mrp)
3272 {
3273 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
3274 	mac_resource_props_t	*mcip_mrp = MCIP_RESOURCE_PROPS(mcip);
3275 
3276 	bcopy(mcip_mrp, mrp, sizeof (mac_resource_props_t));
3277 }
3278 
3279 /*
3280  * Pass a copy of the specified packet to the promiscuous callbacks
3281  * of the specified MAC.
3282  *
3283  * If sender is NULL, the function is being invoked for a packet chain
3284  * received from the wire. If sender is non-NULL, it points to
3285  * the MAC client from which the packet is being sent.
3286  *
3287  * The packets are distributed to the promiscuous callbacks as follows:
3288  *
3289  * - all packets are sent to the MAC_CLIENT_PROMISC_ALL callbacks
3290  * - all broadcast and multicast packets are sent to the
3291  *   MAC_CLIENT_PROMISC_FILTER and MAC_CLIENT_PROMISC_MULTI.
3292  *
3293  * The unicast packets of MAC_CLIENT_PROMISC_FILTER callbacks are dispatched
3294  * after classification by mac_rx_deliver().
3295  */
3296 
3297 static void
3298 mac_promisc_dispatch_one(mac_promisc_impl_t *mpip, mblk_t *mp,
3299     boolean_t loopback)
3300 {
3301 	mblk_t *mp_copy, *mp_next;
3302 
3303 	if (!mpip->mpi_no_copy || mpip->mpi_strip_vlan_tag) {
3304 		mp_copy = copymsg(mp);
3305 		if (mp_copy == NULL)
3306 			return;
3307 
3308 		if (mpip->mpi_strip_vlan_tag) {
3309 			mp_copy = mac_strip_vlan_tag_chain(mp_copy);
3310 			if (mp_copy == NULL)
3311 				return;
3312 		}
3313 		mp_next = NULL;
3314 	} else {
3315 		mp_copy = mp;
3316 		mp_next = mp->b_next;
3317 	}
3318 	mp_copy->b_next = NULL;
3319 
3320 	mpip->mpi_fn(mpip->mpi_arg, NULL, mp_copy, loopback);
3321 	if (mp_copy == mp)
3322 		mp->b_next = mp_next;
3323 }
3324 
3325 /*
3326  * Return the VID of a packet. Zero if the packet is not tagged.
3327  */
3328 static uint16_t
3329 mac_ether_vid(mblk_t *mp)
3330 {
3331 	struct ether_header *eth = (struct ether_header *)mp->b_rptr;
3332 
3333 	if (ntohs(eth->ether_type) == ETHERTYPE_VLAN) {
3334 		struct ether_vlan_header *t_evhp =
3335 		    (struct ether_vlan_header *)mp->b_rptr;
3336 		return (VLAN_ID(ntohs(t_evhp->ether_tci)));
3337 	}
3338 
3339 	return (0);
3340 }
3341 
3342 /*
3343  * Return whether the specified packet contains a multicast or broadcast
3344  * destination MAC address.
3345  */
3346 static boolean_t
3347 mac_is_mcast(mac_impl_t *mip, mblk_t *mp)
3348 {
3349 	mac_header_info_t hdr_info;
3350 
3351 	if (mac_header_info((mac_handle_t)mip, mp, &hdr_info) != 0)
3352 		return (B_FALSE);
3353 	return ((hdr_info.mhi_dsttype == MAC_ADDRTYPE_BROADCAST) ||
3354 	    (hdr_info.mhi_dsttype == MAC_ADDRTYPE_MULTICAST));
3355 }
3356 
3357 /*
3358  * Send a copy of an mblk chain to the MAC clients of the specified MAC.
3359  * "sender" points to the sender MAC client for outbound packets, and
3360  * is set to NULL for inbound packets.
3361  */
3362 void
3363 mac_promisc_dispatch(mac_impl_t *mip, mblk_t *mp_chain,
3364     mac_client_impl_t *sender)
3365 {
3366 	mac_promisc_impl_t *mpip;
3367 	mac_cb_t *mcb;
3368 	mblk_t *mp;
3369 	boolean_t is_mcast, is_sender;
3370 
3371 	MAC_PROMISC_WALKER_INC(mip);
3372 	for (mp = mp_chain; mp != NULL; mp = mp->b_next) {
3373 		is_mcast = mac_is_mcast(mip, mp);
3374 		/* send packet to interested callbacks */
3375 		for (mcb = mip->mi_promisc_list; mcb != NULL;
3376 		    mcb = mcb->mcb_nextp) {
3377 			mpip = (mac_promisc_impl_t *)mcb->mcb_objp;
3378 			is_sender = (mpip->mpi_mcip == sender);
3379 
3380 			if (is_sender && mpip->mpi_no_tx_loop)
3381 				/*
3382 				 * The sender doesn't want to receive
3383 				 * copies of the packets it sends.
3384 				 */
3385 				continue;
3386 
3387 			/* this client doesn't need any packets (bridge) */
3388 			if (mpip->mpi_fn == NULL)
3389 				continue;
3390 
3391 			/*
3392 			 * For an ethernet MAC, don't displatch a multicast
3393 			 * packet to a non-PROMISC_ALL callbacks unless the VID
3394 			 * of the packet matches the VID of the client.
3395 			 */
3396 			if (is_mcast &&
3397 			    mpip->mpi_type != MAC_CLIENT_PROMISC_ALL &&
3398 			    !mac_client_check_flow_vid(mpip->mpi_mcip,
3399 			    mac_ether_vid(mp)))
3400 				continue;
3401 
3402 			if (is_sender ||
3403 			    mpip->mpi_type == MAC_CLIENT_PROMISC_ALL ||
3404 			    is_mcast)
3405 				mac_promisc_dispatch_one(mpip, mp, is_sender);
3406 		}
3407 	}
3408 	MAC_PROMISC_WALKER_DCR(mip);
3409 }
3410 
3411 void
3412 mac_promisc_client_dispatch(mac_client_impl_t *mcip, mblk_t *mp_chain)
3413 {
3414 	mac_impl_t		*mip = mcip->mci_mip;
3415 	mac_promisc_impl_t	*mpip;
3416 	boolean_t		is_mcast;
3417 	mblk_t			*mp;
3418 	mac_cb_t		*mcb;
3419 
3420 	/*
3421 	 * The unicast packets for the MAC client still
3422 	 * need to be delivered to the MAC_CLIENT_PROMISC_FILTERED
3423 	 * promiscuous callbacks. The broadcast and multicast
3424 	 * packets were delivered from mac_rx().
3425 	 */
3426 	MAC_PROMISC_WALKER_INC(mip);
3427 	for (mp = mp_chain; mp != NULL; mp = mp->b_next) {
3428 		is_mcast = mac_is_mcast(mip, mp);
3429 		for (mcb = mcip->mci_promisc_list; mcb != NULL;
3430 		    mcb = mcb->mcb_nextp) {
3431 			mpip = (mac_promisc_impl_t *)mcb->mcb_objp;
3432 			if (mpip->mpi_type == MAC_CLIENT_PROMISC_FILTERED &&
3433 			    !is_mcast) {
3434 				mac_promisc_dispatch_one(mpip, mp, B_FALSE);
3435 			}
3436 		}
3437 	}
3438 	MAC_PROMISC_WALKER_DCR(mip);
3439 }
3440 
3441 /*
3442  * Return the margin value currently assigned to the specified MAC instance.
3443  */
3444 void
3445 mac_margin_get(mac_handle_t mh, uint32_t *marginp)
3446 {
3447 	mac_impl_t *mip = (mac_impl_t *)mh;
3448 
3449 	rw_enter(&(mip->mi_rw_lock), RW_READER);
3450 	*marginp = mip->mi_margin;
3451 	rw_exit(&(mip->mi_rw_lock));
3452 }
3453 
3454 /*
3455  * mac_info_get() is used for retrieving the mac_info when a DL_INFO_REQ is
3456  * issued before a DL_ATTACH_REQ. we walk the i_mac_impl_hash table and find
3457  * the first mac_impl_t with a matching driver name; then we copy its mac_info_t
3458  * to the caller. we do all this with i_mac_impl_lock held so the mac_impl_t
3459  * cannot disappear while we are accessing it.
3460  */
3461 typedef struct i_mac_info_state_s {
3462 	const char	*mi_name;
3463 	mac_info_t	*mi_infop;
3464 } i_mac_info_state_t;
3465 
3466 /*ARGSUSED*/
3467 static uint_t
3468 i_mac_info_walker(mod_hash_key_t key, mod_hash_val_t *val, void *arg)
3469 {
3470 	i_mac_info_state_t *statep = arg;
3471 	mac_impl_t *mip = (mac_impl_t *)val;
3472 
3473 	if (mip->mi_state_flags & MIS_DISABLED)
3474 		return (MH_WALK_CONTINUE);
3475 
3476 	if (strcmp(statep->mi_name,
3477 	    ddi_driver_name(mip->mi_dip)) != 0)
3478 		return (MH_WALK_CONTINUE);
3479 
3480 	statep->mi_infop = &mip->mi_info;
3481 	return (MH_WALK_TERMINATE);
3482 }
3483 
3484 boolean_t
3485 mac_info_get(const char *name, mac_info_t *minfop)
3486 {
3487 	i_mac_info_state_t state;
3488 
3489 	rw_enter(&i_mac_impl_lock, RW_READER);
3490 	state.mi_name = name;
3491 	state.mi_infop = NULL;
3492 	mod_hash_walk(i_mac_impl_hash, i_mac_info_walker, &state);
3493 	if (state.mi_infop == NULL) {
3494 		rw_exit(&i_mac_impl_lock);
3495 		return (B_FALSE);
3496 	}
3497 	*minfop = *state.mi_infop;
3498 	rw_exit(&i_mac_impl_lock);
3499 	return (B_TRUE);
3500 }
3501 
3502 /*
3503  * To get the capabilities that MAC layer cares about, such as rings, factory
3504  * mac address, vnic or not, it should directly invoke this function.  If the
3505  * link is part of a bridge, then the only "capability" it has is the inability
3506  * to do zero copy.
3507  */
3508 boolean_t
3509 i_mac_capab_get(mac_handle_t mh, mac_capab_t cap, void *cap_data)
3510 {
3511 	mac_impl_t *mip = (mac_impl_t *)mh;
3512 
3513 	if (mip->mi_bridge_link != NULL)
3514 		return (cap == MAC_CAPAB_NO_ZCOPY);
3515 	else if (mip->mi_callbacks->mc_callbacks & MC_GETCAPAB)
3516 		return (mip->mi_getcapab(mip->mi_driver, cap, cap_data));
3517 	else
3518 		return (B_FALSE);
3519 }
3520 
3521 /*
3522  * Capability query function. If number of active mac clients is greater than
3523  * 1, only limited capabilities can be advertised to the caller no matter the
3524  * driver has certain capability or not. Else, we query the driver to get the
3525  * capability.
3526  */
3527 boolean_t
3528 mac_capab_get(mac_handle_t mh, mac_capab_t cap, void *cap_data)
3529 {
3530 	mac_impl_t *mip = (mac_impl_t *)mh;
3531 
3532 	/*
3533 	 * if mi_nactiveclients > 1, only MAC_CAPAB_LEGACY, MAC_CAPAB_HCKSUM,
3534 	 * MAC_CAPAB_NO_NATIVEVLAN and MAC_CAPAB_NO_ZCOPY can be advertised.
3535 	 */
3536 	if (mip->mi_nactiveclients > 1) {
3537 		switch (cap) {
3538 		case MAC_CAPAB_NO_NATIVEVLAN:
3539 		case MAC_CAPAB_NO_ZCOPY:
3540 			return (B_TRUE);
3541 		case MAC_CAPAB_LEGACY:
3542 		case MAC_CAPAB_HCKSUM:
3543 			break;
3544 		default:
3545 			return (B_FALSE);
3546 		}
3547 	}
3548 
3549 	/* else get capab from driver */
3550 	return (i_mac_capab_get(mh, cap, cap_data));
3551 }
3552 
3553 boolean_t
3554 mac_sap_verify(mac_handle_t mh, uint32_t sap, uint32_t *bind_sap)
3555 {
3556 	mac_impl_t *mip = (mac_impl_t *)mh;
3557 
3558 	return (mip->mi_type->mt_ops.mtops_sap_verify(sap, bind_sap,
3559 	    mip->mi_pdata));
3560 }
3561 
3562 mblk_t *
3563 mac_header(mac_handle_t mh, const uint8_t *daddr, uint32_t sap, mblk_t *payload,
3564     size_t extra_len)
3565 {
3566 	mac_impl_t	*mip = (mac_impl_t *)mh;
3567 	const uint8_t	*hdr_daddr;
3568 
3569 	/*
3570 	 * If the MAC is point-to-point with a fixed destination address, then
3571 	 * we must always use that destination in the MAC header.
3572 	 */
3573 	hdr_daddr = (mip->mi_dstaddr_set ? mip->mi_dstaddr : daddr);
3574 	return (mip->mi_type->mt_ops.mtops_header(mip->mi_addr, hdr_daddr, sap,
3575 	    mip->mi_pdata, payload, extra_len));
3576 }
3577 
3578 int
3579 mac_header_info(mac_handle_t mh, mblk_t *mp, mac_header_info_t *mhip)
3580 {
3581 	mac_impl_t *mip = (mac_impl_t *)mh;
3582 
3583 	return (mip->mi_type->mt_ops.mtops_header_info(mp, mip->mi_pdata,
3584 	    mhip));
3585 }
3586 
3587 int
3588 mac_vlan_header_info(mac_handle_t mh, mblk_t *mp, mac_header_info_t *mhip)
3589 {
3590 	mac_impl_t	*mip = (mac_impl_t *)mh;
3591 	boolean_t	is_ethernet = (mip->mi_info.mi_media == DL_ETHER);
3592 	int		err = 0;
3593 
3594 	/*
3595 	 * Packets should always be at least 16 bit aligned.
3596 	 */
3597 	ASSERT(IS_P2ALIGNED(mp->b_rptr, sizeof (uint16_t)));
3598 
3599 	if ((err = mac_header_info(mh, mp, mhip)) != 0)
3600 		return (err);
3601 
3602 	/*
3603 	 * If this is a VLAN-tagged Ethernet packet, then the SAP in the
3604 	 * mac_header_info_t as returned by mac_header_info() is
3605 	 * ETHERTYPE_VLAN. We need to grab the ethertype from the VLAN header.
3606 	 */
3607 	if (is_ethernet && (mhip->mhi_bindsap == ETHERTYPE_VLAN)) {
3608 		struct ether_vlan_header *evhp;
3609 		uint16_t sap;
3610 		mblk_t *tmp = NULL;
3611 		size_t size;
3612 
3613 		size = sizeof (struct ether_vlan_header);
3614 		if (MBLKL(mp) < size) {
3615 			/*
3616 			 * Pullup the message in order to get the MAC header
3617 			 * infomation. Note that this is a read-only function,
3618 			 * we keep the input packet intact.
3619 			 */
3620 			if ((tmp = msgpullup(mp, size)) == NULL)
3621 				return (EINVAL);
3622 
3623 			mp = tmp;
3624 		}
3625 		evhp = (struct ether_vlan_header *)mp->b_rptr;
3626 		sap = ntohs(evhp->ether_type);
3627 		(void) mac_sap_verify(mh, sap, &mhip->mhi_bindsap);
3628 		mhip->mhi_hdrsize = sizeof (struct ether_vlan_header);
3629 		mhip->mhi_tci = ntohs(evhp->ether_tci);
3630 		mhip->mhi_istagged = B_TRUE;
3631 		freemsg(tmp);
3632 
3633 		if (VLAN_CFI(mhip->mhi_tci) != ETHER_CFI)
3634 			return (EINVAL);
3635 	} else {
3636 		mhip->mhi_istagged = B_FALSE;
3637 		mhip->mhi_tci = 0;
3638 	}
3639 
3640 	return (0);
3641 }
3642 
3643 mblk_t *
3644 mac_header_cook(mac_handle_t mh, mblk_t *mp)
3645 {
3646 	mac_impl_t *mip = (mac_impl_t *)mh;
3647 
3648 	if (mip->mi_type->mt_ops.mtops_ops & MTOPS_HEADER_COOK) {
3649 		if (DB_REF(mp) > 1) {
3650 			mblk_t *newmp = copymsg(mp);
3651 			if (newmp == NULL)
3652 				return (NULL);
3653 			freemsg(mp);
3654 			mp = newmp;
3655 		}
3656 		return (mip->mi_type->mt_ops.mtops_header_cook(mp,
3657 		    mip->mi_pdata));
3658 	}
3659 	return (mp);
3660 }
3661 
3662 mblk_t *
3663 mac_header_uncook(mac_handle_t mh, mblk_t *mp)
3664 {
3665 	mac_impl_t *mip = (mac_impl_t *)mh;
3666 
3667 	if (mip->mi_type->mt_ops.mtops_ops & MTOPS_HEADER_UNCOOK) {
3668 		if (DB_REF(mp) > 1) {
3669 			mblk_t *newmp = copymsg(mp);
3670 			if (newmp == NULL)
3671 				return (NULL);
3672 			freemsg(mp);
3673 			mp = newmp;
3674 		}
3675 		return (mip->mi_type->mt_ops.mtops_header_uncook(mp,
3676 		    mip->mi_pdata));
3677 	}
3678 	return (mp);
3679 }
3680 
3681 uint_t
3682 mac_addr_len(mac_handle_t mh)
3683 {
3684 	mac_impl_t *mip = (mac_impl_t *)mh;
3685 
3686 	return (mip->mi_type->mt_addr_length);
3687 }
3688 
3689 /* True if a MAC is a VNIC */
3690 boolean_t
3691 mac_is_vnic(mac_handle_t mh)
3692 {
3693 	return (((mac_impl_t *)mh)->mi_state_flags & MIS_IS_VNIC);
3694 }
3695 
3696 mac_handle_t
3697 mac_get_lower_mac_handle(mac_handle_t mh)
3698 {
3699 	mac_impl_t *mip = (mac_impl_t *)mh;
3700 
3701 	ASSERT(mac_is_vnic(mh));
3702 	return (((vnic_t *)mip->mi_driver)->vn_lower_mh);
3703 }
3704 
3705 void
3706 mac_update_resources(mac_resource_props_t *nmrp, mac_resource_props_t *cmrp,
3707     boolean_t is_user_flow)
3708 {
3709 	if (nmrp != NULL && cmrp != NULL) {
3710 		if (nmrp->mrp_mask & MRP_PRIORITY) {
3711 			if (nmrp->mrp_priority == MPL_RESET) {
3712 				cmrp->mrp_mask &= ~MRP_PRIORITY;
3713 				if (is_user_flow) {
3714 					cmrp->mrp_priority =
3715 					    MPL_SUBFLOW_DEFAULT;
3716 				} else {
3717 					cmrp->mrp_priority = MPL_LINK_DEFAULT;
3718 				}
3719 			} else {
3720 				cmrp->mrp_mask |= MRP_PRIORITY;
3721 				cmrp->mrp_priority = nmrp->mrp_priority;
3722 			}
3723 		}
3724 		if (nmrp->mrp_mask & MRP_MAXBW) {
3725 			cmrp->mrp_maxbw = nmrp->mrp_maxbw;
3726 			if (nmrp->mrp_maxbw == MRP_MAXBW_RESETVAL)
3727 				cmrp->mrp_mask &= ~MRP_MAXBW;
3728 			else
3729 				cmrp->mrp_mask |= MRP_MAXBW;
3730 		}
3731 		if (nmrp->mrp_mask & MRP_CPUS)
3732 			MAC_COPY_CPUS(nmrp, cmrp);
3733 
3734 		if (nmrp->mrp_mask & MRP_PROTECT)
3735 			mac_protect_update(nmrp, cmrp);
3736 	}
3737 }
3738 
3739 /*
3740  * i_mac_set_resources:
3741  *
3742  * This routine associates properties with the primary MAC client of
3743  * the specified MAC instance.
3744  * - Cache the properties in mac_impl_t
3745  * - Apply the properties to the primary MAC client if exists
3746  */
3747 int
3748 i_mac_set_resources(mac_handle_t mh, mac_resource_props_t *mrp)
3749 {
3750 	mac_impl_t		*mip = (mac_impl_t *)mh;
3751 	mac_client_impl_t	*mcip;
3752 	int			err = 0;
3753 	uint32_t		resmask, newresmask;
3754 	mac_resource_props_t	tmrp, umrp;
3755 
3756 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
3757 
3758 	err = mac_validate_props(mrp);
3759 	if (err != 0)
3760 		return (err);
3761 
3762 	bcopy(&mip->mi_resource_props, &umrp, sizeof (mac_resource_props_t));
3763 	resmask = umrp.mrp_mask;
3764 	mac_update_resources(mrp, &umrp, B_FALSE);
3765 	newresmask = umrp.mrp_mask;
3766 
3767 	if (resmask == 0 && newresmask != 0) {
3768 		/*
3769 		 * Bandwidth, priority or cpu link properties configured,
3770 		 * must disable fastpath.
3771 		 */
3772 		if ((err = mac_fastpath_disable((mac_handle_t)mip)) != 0)
3773 			return (err);
3774 	}
3775 
3776 	/*
3777 	 * Since bind_cpu may be modified by mac_client_set_resources()
3778 	 * we use a copy of bind_cpu and finally cache bind_cpu in mip.
3779 	 * This allows us to cache only user edits in mip.
3780 	 */
3781 	bcopy(mrp, &tmrp, sizeof (mac_resource_props_t));
3782 	mcip = mac_primary_client_handle(mip);
3783 	if (mcip != NULL && (mcip->mci_state_flags & MCIS_IS_AGGR_PORT) == 0) {
3784 		err =
3785 		    mac_client_set_resources((mac_client_handle_t)mcip, &tmrp);
3786 	}
3787 
3788 	/* Only update the values if mac_client_set_resources succeeded */
3789 	if (err == 0) {
3790 		bcopy(&umrp, &mip->mi_resource_props,
3791 		    sizeof (mac_resource_props_t));
3792 		/*
3793 		 * If bankwidth, priority or cpu link properties cleared,
3794 		 * renable fastpath.
3795 		 */
3796 		if (resmask != 0 && newresmask == 0)
3797 			mac_fastpath_enable((mac_handle_t)mip);
3798 	} else if (resmask == 0 && newresmask != 0) {
3799 		mac_fastpath_enable((mac_handle_t)mip);
3800 	}
3801 	return (err);
3802 }
3803 
3804 int
3805 mac_set_resources(mac_handle_t mh, mac_resource_props_t *mrp)
3806 {
3807 	int err;
3808 
3809 	i_mac_perim_enter((mac_impl_t *)mh);
3810 	err = i_mac_set_resources(mh, mrp);
3811 	i_mac_perim_exit((mac_impl_t *)mh);
3812 	return (err);
3813 }
3814 
3815 /*
3816  * Get the properties cached for the specified MAC instance.
3817  */
3818 void
3819 mac_get_resources(mac_handle_t mh, mac_resource_props_t *mrp)
3820 {
3821 	mac_impl_t 		*mip = (mac_impl_t *)mh;
3822 	mac_client_impl_t	*mcip;
3823 
3824 	if (mip->mi_state_flags & MIS_IS_VNIC) {
3825 		mcip = mac_primary_client_handle(mip);
3826 		if (mcip != NULL) {
3827 			mac_client_get_resources((mac_client_handle_t)mcip,
3828 			    mrp);
3829 			return;
3830 		}
3831 	}
3832 	bcopy(&mip->mi_resource_props, mrp, sizeof (mac_resource_props_t));
3833 }
3834 
3835 int
3836 mac_set_pvid(mac_handle_t mh, uint16_t pvid)
3837 {
3838 	mac_impl_t *mip = (mac_impl_t *)mh;
3839 	mac_client_impl_t *mcip;
3840 	mac_unicast_impl_t *muip;
3841 
3842 	i_mac_perim_enter(mip);
3843 	if (pvid != 0) {
3844 		for (mcip = mip->mi_clients_list; mcip != NULL;
3845 		    mcip = mcip->mci_client_next) {
3846 			for (muip = mcip->mci_unicast_list; muip != NULL;
3847 			    muip = muip->mui_next) {
3848 				if (muip->mui_vid == pvid) {
3849 					i_mac_perim_exit(mip);
3850 					return (EBUSY);
3851 				}
3852 			}
3853 		}
3854 	}
3855 	mip->mi_pvid = pvid;
3856 	i_mac_perim_exit(mip);
3857 	return (0);
3858 }
3859 
3860 uint16_t
3861 mac_get_pvid(mac_handle_t mh)
3862 {
3863 	mac_impl_t *mip = (mac_impl_t *)mh;
3864 
3865 	return (mip->mi_pvid);
3866 }
3867 
3868 uint32_t
3869 mac_get_llimit(mac_handle_t mh)
3870 {
3871 	mac_impl_t *mip = (mac_impl_t *)mh;
3872 
3873 	return (mip->mi_llimit);
3874 }
3875 
3876 uint32_t
3877 mac_get_ldecay(mac_handle_t mh)
3878 {
3879 	mac_impl_t *mip = (mac_impl_t *)mh;
3880 
3881 	return (mip->mi_ldecay);
3882 }
3883 
3884 /*
3885  * Rename a mac client, its flow, and the kstat.
3886  */
3887 int
3888 mac_rename_primary(mac_handle_t mh, const char *new_name)
3889 {
3890 	mac_impl_t		*mip = (mac_impl_t *)mh;
3891 	mac_client_impl_t	*cur_clnt = NULL;
3892 	flow_entry_t		*fep;
3893 
3894 	i_mac_perim_enter(mip);
3895 
3896 	/*
3897 	 * VNICs: we need to change the sys flow name and
3898 	 * the associated flow kstat.
3899 	 */
3900 	if (mip->mi_state_flags & MIS_IS_VNIC) {
3901 		ASSERT(new_name != NULL);
3902 		mac_rename_flow_names(mac_vnic_lower(mip), new_name);
3903 		goto done;
3904 	}
3905 	/*
3906 	 * This mac may itself be an aggr link, or it may have some client
3907 	 * which is an aggr port. For both cases, we need to change the
3908 	 * aggr port's mac client name, its flow name and the associated flow
3909 	 * kstat.
3910 	 */
3911 	if (mip->mi_state_flags & MIS_IS_AGGR) {
3912 		mac_capab_aggr_t aggr_cap;
3913 		mac_rename_fn_t rename_fn;
3914 		boolean_t ret;
3915 
3916 		ASSERT(new_name != NULL);
3917 		ret = i_mac_capab_get((mac_handle_t)mip, MAC_CAPAB_AGGR,
3918 		    (void *)(&aggr_cap));
3919 		ASSERT(ret == B_TRUE);
3920 		rename_fn = aggr_cap.mca_rename_fn;
3921 		rename_fn(new_name, mip->mi_driver);
3922 		/*
3923 		 * The aggr's client name and kstat flow name will be
3924 		 * updated below, i.e. via mac_rename_flow_names.
3925 		 */
3926 	}
3927 
3928 	for (cur_clnt = mip->mi_clients_list; cur_clnt != NULL;
3929 	    cur_clnt = cur_clnt->mci_client_next) {
3930 		if (cur_clnt->mci_state_flags & MCIS_IS_AGGR_PORT) {
3931 			if (new_name != NULL) {
3932 				char *str_st = cur_clnt->mci_name;
3933 				char *str_del = strchr(str_st, '-');
3934 
3935 				ASSERT(str_del != NULL);
3936 				bzero(str_del + 1, MAXNAMELEN -
3937 				    (str_del - str_st + 1));
3938 				bcopy(new_name, str_del + 1,
3939 				    strlen(new_name));
3940 			}
3941 			fep = cur_clnt->mci_flent;
3942 			mac_rename_flow(fep, cur_clnt->mci_name);
3943 			break;
3944 		} else if (new_name != NULL &&
3945 		    cur_clnt->mci_state_flags & MCIS_USE_DATALINK_NAME) {
3946 			mac_rename_flow_names(cur_clnt, new_name);
3947 			break;
3948 		}
3949 	}
3950 
3951 done:
3952 	i_mac_perim_exit(mip);
3953 	return (0);
3954 }
3955 
3956 /*
3957  * Rename the MAC client's flow names
3958  */
3959 static void
3960 mac_rename_flow_names(mac_client_impl_t *mcip, const char *new_name)
3961 {
3962 	flow_entry_t	*flent;
3963 	uint16_t	vid;
3964 	char		flowname[MAXFLOWNAMELEN];
3965 	mac_impl_t	*mip = mcip->mci_mip;
3966 
3967 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mip));
3968 
3969 	/*
3970 	 * Use mi_rw_lock to ensure that threads not in the mac perimeter
3971 	 * see a self-consistent value for mci_name
3972 	 */
3973 	rw_enter(&mip->mi_rw_lock, RW_WRITER);
3974 	(void) strlcpy(mcip->mci_name, new_name, sizeof (mcip->mci_name));
3975 	rw_exit(&mip->mi_rw_lock);
3976 
3977 	mac_rename_flow(mcip->mci_flent, new_name);
3978 
3979 	if (mcip->mci_nflents == 1)
3980 		return;
3981 
3982 	/*
3983 	 * We have to rename all the others too, no stats to destroy for
3984 	 * these.
3985 	 */
3986 	for (flent = mcip->mci_flent_list; flent != NULL;
3987 	    flent = flent->fe_client_next) {
3988 		if (flent != mcip->mci_flent) {
3989 			vid = i_mac_flow_vid(flent);
3990 			(void) sprintf(flowname, "%s%u", new_name, vid);
3991 			mac_flow_set_name(flent, flowname);
3992 		}
3993 	}
3994 }
3995 
3996 
3997 /*
3998  * Add a flow to the MAC client's flow list - i.e list of MAC/VID tuples
3999  * defined for the specified MAC client.
4000  */
4001 static void
4002 mac_client_add_to_flow_list(mac_client_impl_t *mcip, flow_entry_t *flent)
4003 {
4004 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip));
4005 	/*
4006 	 * The promisc Rx data path walks the mci_flent_list. Protect by
4007 	 * using mi_rw_lock
4008 	 */
4009 	rw_enter(&mcip->mci_rw_lock, RW_WRITER);
4010 
4011 	/* Add it to the head */
4012 	flent->fe_client_next = mcip->mci_flent_list;
4013 	mcip->mci_flent_list = flent;
4014 	mcip->mci_nflents++;
4015 
4016 	/*
4017 	 * Keep track of the number of non-zero VIDs addresses per MAC
4018 	 * client to avoid figuring it out in the data-path.
4019 	 */
4020 	if (i_mac_flow_vid(flent) != VLAN_ID_NONE)
4021 		mcip->mci_nvids++;
4022 
4023 	rw_exit(&mcip->mci_rw_lock);
4024 }
4025 
4026 /*
4027  * Remove a flow entry from the MAC client's list.
4028  */
4029 static void
4030 mac_client_remove_flow_from_list(mac_client_impl_t *mcip, flow_entry_t *flent)
4031 {
4032 	flow_entry_t	*fe = mcip->mci_flent_list;
4033 	flow_entry_t	*prev_fe = NULL;
4034 
4035 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip));
4036 	/*
4037 	 * The promisc Rx data path walks the mci_flent_list. Protect by
4038 	 * using mci_rw_lock
4039 	 */
4040 	rw_enter(&mcip->mci_rw_lock, RW_WRITER);
4041 	while ((fe != NULL) && (fe != flent)) {
4042 		prev_fe = fe;
4043 		fe = fe->fe_client_next;
4044 	}
4045 
4046 	ASSERT(fe != NULL);
4047 	if (prev_fe == NULL) {
4048 		/* Deleting the first node */
4049 		mcip->mci_flent_list = fe->fe_client_next;
4050 	} else {
4051 		prev_fe->fe_client_next = fe->fe_client_next;
4052 	}
4053 	mcip->mci_nflents--;
4054 
4055 	if (i_mac_flow_vid(flent) != VLAN_ID_NONE)
4056 		mcip->mci_nvids--;
4057 
4058 	rw_exit(&mcip->mci_rw_lock);
4059 }
4060 
4061 /*
4062  * Check if the given VID belongs to this MAC client.
4063  */
4064 boolean_t
4065 mac_client_check_flow_vid(mac_client_impl_t *mcip, uint16_t vid)
4066 {
4067 	flow_entry_t	*flent;
4068 	uint16_t	mci_vid;
4069 
4070 	/* The mci_flent_list is protected by mci_rw_lock */
4071 	rw_enter(&mcip->mci_rw_lock, RW_WRITER);
4072 	for (flent = mcip->mci_flent_list; flent != NULL;
4073 	    flent = flent->fe_client_next) {
4074 		mci_vid = i_mac_flow_vid(flent);
4075 		if (vid == mci_vid) {
4076 			rw_exit(&mcip->mci_rw_lock);
4077 			return (B_TRUE);
4078 		}
4079 	}
4080 	rw_exit(&mcip->mci_rw_lock);
4081 	return (B_FALSE);
4082 }
4083 
4084 /*
4085  * Get the flow entry for the specified <MAC addr, VID> tuple.
4086  */
4087 static flow_entry_t *
4088 mac_client_get_flow(mac_client_impl_t *mcip, mac_unicast_impl_t *muip)
4089 {
4090 	mac_address_t *map = mcip->mci_unicast;
4091 	flow_entry_t *flent;
4092 	uint16_t vid;
4093 	flow_desc_t flow_desc;
4094 
4095 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip));
4096 
4097 	mac_flow_get_desc(mcip->mci_flent, &flow_desc);
4098 	if (bcmp(flow_desc.fd_dst_mac, map->ma_addr, map->ma_len) != 0)
4099 		return (NULL);
4100 
4101 	for (flent = mcip->mci_flent_list; flent != NULL;
4102 	    flent = flent->fe_client_next) {
4103 		vid = i_mac_flow_vid(flent);
4104 		if (vid == muip->mui_vid) {
4105 			return (flent);
4106 		}
4107 	}
4108 
4109 	return (NULL);
4110 }
4111 
4112 /*
4113  * Since mci_flent has the SRSs, when we want to remove it, we replace
4114  * the flow_desc_t in mci_flent with that of an existing flent and then
4115  * remove that flent instead of mci_flent.
4116  */
4117 static flow_entry_t *
4118 mac_client_swap_mciflent(mac_client_impl_t *mcip)
4119 {
4120 	flow_entry_t	*flent = mcip->mci_flent;
4121 	flow_tab_t	*ft = flent->fe_flow_tab;
4122 	flow_entry_t	*flent1;
4123 	flow_desc_t	fl_desc;
4124 	char		fl_name[MAXFLOWNAMELEN];
4125 	int		err;
4126 
4127 	ASSERT(MAC_PERIM_HELD((mac_handle_t)mcip->mci_mip));
4128 	ASSERT(mcip->mci_nflents > 1);
4129 
4130 	/* get the next flent following the primary flent  */
4131 	flent1 = mcip->mci_flent_list->fe_client_next;
4132 	ASSERT(flent1 != NULL && flent1->fe_flow_tab == ft);
4133 
4134 	/*
4135 	 * Remove the flent from the flow table before updating the
4136 	 * flow descriptor as the hash depends on the flow descriptor.
4137 	 * This also helps incoming packet classification avoid having
4138 	 * to grab fe_lock. Access to fe_flow_desc of a flent not in the
4139 	 * flow table is done under the fe_lock so that log or stat functions
4140 	 * see a self-consistent fe_flow_desc. The name and desc are specific
4141 	 * to a flow, the rest are shared by all the clients, including
4142 	 * resource control etc.
4143 	 */
4144 	mac_flow_remove(ft, flent, B_TRUE);
4145 	mac_flow_remove(ft, flent1, B_TRUE);
4146 
4147 	bcopy(&flent->fe_flow_desc, &fl_desc, sizeof (flow_desc_t));
4148 	bcopy(flent->fe_flow_name, fl_name, MAXFLOWNAMELEN);
4149 
4150 	/* update the primary flow entry */
4151 	mutex_enter(&flent->fe_lock);
4152 	bcopy(&flent1->fe_flow_desc, &flent->fe_flow_desc,
4153 	    sizeof (flow_desc_t));
4154 	bcopy(&flent1->fe_flow_name, &flent->fe_flow_name, MAXFLOWNAMELEN);
4155 	mutex_exit(&flent->fe_lock);
4156 
4157 	/* update the flow entry that is to be freed */
4158 	mutex_enter(&flent1->fe_lock);
4159 	bcopy(&fl_desc, &flent1->fe_flow_desc, sizeof (flow_desc_t));
4160 	bcopy(fl_name, &flent1->fe_flow_name, MAXFLOWNAMELEN);
4161 	mutex_exit(&flent1->fe_lock);
4162 
4163 	/* now reinsert the flow entries in the table */
4164 	err = mac_flow_add(ft, flent);
4165 	ASSERT(err == 0);
4166 
4167 	err = mac_flow_add(ft, flent1);
4168 	ASSERT(err == 0);
4169 
4170 	return (flent1);
4171 }
4172 
4173 /*
4174  * Return whether there is only one flow entry associated with this
4175  * MAC client.
4176  */
4177 static boolean_t
4178 mac_client_single_rcvr(mac_client_impl_t *mcip)
4179 {
4180 	return (mcip->mci_nflents == 1);
4181 }
4182 
4183 int
4184 mac_validate_props(mac_resource_props_t *mrp)
4185 {
4186 	if (mrp == NULL)
4187 		return (0);
4188 
4189 	if (mrp->mrp_mask & MRP_PRIORITY) {
4190 		mac_priority_level_t	pri = mrp->mrp_priority;
4191 
4192 		if (pri < MPL_LOW || pri > MPL_RESET)
4193 			return (EINVAL);
4194 	}
4195 
4196 	if (mrp->mrp_mask & MRP_MAXBW) {
4197 		uint64_t maxbw = mrp->mrp_maxbw;
4198 
4199 		if (maxbw < MRP_MAXBW_MINVAL && maxbw != 0)
4200 			return (EINVAL);
4201 	}
4202 	if (mrp->mrp_mask & MRP_CPUS) {
4203 		int i, j;
4204 		mac_cpu_mode_t	fanout;
4205 
4206 		if (mrp->mrp_ncpus > ncpus || mrp->mrp_ncpus > MAX_SR_FANOUT)
4207 			return (EINVAL);
4208 
4209 		for (i = 0; i < mrp->mrp_ncpus; i++) {
4210 			for (j = 0; j < mrp->mrp_ncpus; j++) {
4211 				if (i != j &&
4212 				    mrp->mrp_cpu[i] == mrp->mrp_cpu[j]) {
4213 					return (EINVAL);
4214 				}
4215 			}
4216 		}
4217 
4218 		for (i = 0; i < mrp->mrp_ncpus; i++) {
4219 			cpu_t *cp;
4220 			int rv;
4221 
4222 			mutex_enter(&cpu_lock);
4223 			cp = cpu_get(mrp->mrp_cpu[i]);
4224 			if (cp != NULL)
4225 				rv = cpu_is_online(cp);
4226 			else
4227 				rv = 0;
4228 			mutex_exit(&cpu_lock);
4229 			if (rv == 0)
4230 				return (EINVAL);
4231 		}
4232 
4233 		fanout = mrp->mrp_fanout_mode;
4234 		if (fanout < 0 || fanout > MCM_CPUS)
4235 			return (EINVAL);
4236 	}
4237 
4238 	if (mrp->mrp_mask & MRP_PROTECT) {
4239 		int err = mac_protect_validate(mrp);
4240 		if (err != 0)
4241 			return (err);
4242 	}
4243 	return (0);
4244 }
4245 
4246 /*
4247  * Send a MAC_NOTE_LINK notification to all the MAC clients whenever the
4248  * underlying physical link is down. This is to allow MAC clients to
4249  * communicate with other clients.
4250  */
4251 void
4252 mac_virtual_link_update(mac_impl_t *mip)
4253 {
4254 	if (mip->mi_linkstate != LINK_STATE_UP)
4255 		i_mac_notify(mip, MAC_NOTE_LINK);
4256 }
4257 
4258 /*
4259  * For clients that have a pass-thru MAC, e.g. VNIC, we set the VNIC's
4260  * mac handle in the client.
4261  */
4262 void
4263 mac_set_upper_mac(mac_client_handle_t mch, mac_handle_t mh)
4264 {
4265 	mac_client_impl_t	*mcip = (mac_client_impl_t *)mch;
4266 
4267 	mcip->mci_upper_mip = (mac_impl_t *)mh;
4268 }
4269 
4270 /*
4271  * Mark the mac as being used exclusively by the single mac client that is
4272  * doing some control operation on this mac. No further opens of this mac
4273  * will be allowed until this client calls mac_unmark_exclusive. The mac
4274  * client calling this function must already be in the mac perimeter
4275  */
4276 int
4277 mac_mark_exclusive(mac_handle_t mh)
4278 {
4279 	mac_impl_t	*mip = (mac_impl_t *)mh;
4280 
4281 	ASSERT(MAC_PERIM_HELD(mh));
4282 	/*
4283 	 * Look up its entry in the global hash table.
4284 	 */
4285 	rw_enter(&i_mac_impl_lock, RW_WRITER);
4286 	if (mip->mi_state_flags & MIS_DISABLED) {
4287 		rw_exit(&i_mac_impl_lock);
4288 		return (ENOENT);
4289 	}
4290 
4291 	/*
4292 	 * A reference to mac is held even if the link is not plumbed.
4293 	 * In i_dls_link_create() we open the MAC interface and hold the
4294 	 * reference. There is an additional reference for the mac_open
4295 	 * done in acquiring the mac perimeter
4296 	 */
4297 	if (mip->mi_ref != 2) {
4298 		rw_exit(&i_mac_impl_lock);
4299 		return (EBUSY);
4300 	}
4301 
4302 	ASSERT(!(mip->mi_state_flags & MIS_EXCLUSIVE_HELD));
4303 	mip->mi_state_flags |= MIS_EXCLUSIVE_HELD;
4304 	rw_exit(&i_mac_impl_lock);
4305 	return (0);
4306 }
4307 
4308 void
4309 mac_unmark_exclusive(mac_handle_t mh)
4310 {
4311 	mac_impl_t	*mip = (mac_impl_t *)mh;
4312 
4313 	ASSERT(MAC_PERIM_HELD(mh));
4314 
4315 	rw_enter(&i_mac_impl_lock, RW_WRITER);
4316 	/* 1 for the creation and another for the perimeter */
4317 	ASSERT(mip->mi_ref == 2 && (mip->mi_state_flags & MIS_EXCLUSIVE_HELD));
4318 	mip->mi_state_flags &= ~MIS_EXCLUSIVE_HELD;
4319 	rw_exit(&i_mac_impl_lock);
4320 }
4321 
4322 /*
4323  * Set the MTU for the specified MAC.  Note that this mechanism depends on
4324  * the driver calling mac_maxsdu_update() to update the link MTU if it was
4325  * successful in setting its MTU.
4326  *
4327  * Note that there is potential for improvement here.  A better model might be
4328  * to not require drivers to call mac_maxsdu_update(), but rather have this
4329  * function update mi_sdu_max and send notifications if the driver setprop
4330  * callback succeeds.  This would remove the burden and complexity from
4331  * drivers.
4332  */
4333 int
4334 mac_set_mtu(mac_handle_t mh, uint_t new_mtu, uint_t *old_mtu_arg)
4335 {
4336 	mac_impl_t *mip = (mac_impl_t *)mh;
4337 	uint_t old_mtu;
4338 	int rv = 0;
4339 
4340 	i_mac_perim_enter(mip);
4341 
4342 	if (!(mip->mi_callbacks->mc_callbacks & (MC_SETPROP|MC_GETPROP))) {
4343 		rv = ENOTSUP;
4344 		goto bail;
4345 	}
4346 
4347 	old_mtu = mip->mi_sdu_max;
4348 
4349 	if (old_mtu != new_mtu) {
4350 		rv = mip->mi_callbacks->mc_setprop(mip->mi_driver,
4351 		    "mtu", MAC_PROP_MTU, sizeof (uint_t), &new_mtu);
4352 	}
4353 
4354 bail:
4355 	i_mac_perim_exit(mip);
4356 
4357 	if (rv == 0 && old_mtu_arg != NULL)
4358 		*old_mtu_arg = old_mtu;
4359 	return (rv);
4360 }
4361 
4362 void
4363 mac_get_hwgrp_info(mac_handle_t mh, int grp_index, uint_t *grp_num,
4364     uint_t *n_rings, uint_t *type, uint_t *n_clnts, char *clnts_name)
4365 {
4366 	mac_impl_t *mip = (mac_impl_t *)mh;
4367 	mac_grp_client_t *mcip;
4368 	uint_t i = 0, index = 0;
4369 
4370 	/* Revisit when we implement fully dynamic group allocation */
4371 	ASSERT(grp_index >= 0 && grp_index < mip->mi_rx_group_count);
4372 
4373 	rw_enter(&mip->mi_rw_lock, RW_READER);
4374 	*grp_num = mip->mi_rx_groups[grp_index].mrg_index;
4375 	*type = mip->mi_rx_groups[grp_index].mrg_type;
4376 	*n_rings = mip->mi_rx_groups[grp_index].mrg_cur_count;
4377 	for (mcip = mip->mi_rx_groups[grp_index].mrg_clients; mcip != NULL;
4378 	    mcip = mcip->mgc_next) {
4379 		int name_len = strlen(mcip->mgc_client->mci_name);
4380 
4381 		/*
4382 		 * MAXCLIENTNAMELEN is the buffer size reserved for client
4383 		 * names.
4384 		 * XXXX Formating the client name string needs to be moved
4385 		 * to user land when fixing the size of dhi_clnts in
4386 		 * dld_hwgrpinfo_t. We should use n_clients * client_name for
4387 		 * dhi_clntsin instead of MAXCLIENTNAMELEN
4388 		 */
4389 		if (index + name_len >= MAXCLIENTNAMELEN) {
4390 			index = MAXCLIENTNAMELEN;
4391 			break;
4392 		}
4393 		bcopy(mcip->mgc_client->mci_name, &(clnts_name[index]),
4394 		    name_len);
4395 		index += name_len;
4396 		clnts_name[index++] = ',';
4397 		i++;
4398 	}
4399 
4400 	/* Get rid of the last , */
4401 	if (index > 0)
4402 		clnts_name[index - 1] = '\0';
4403 	*n_clnts = i;
4404 	rw_exit(&mip->mi_rw_lock);
4405 }
4406 
4407 uint_t
4408 mac_hwgrp_num(mac_handle_t mh)
4409 {
4410 	mac_impl_t *mip = (mac_impl_t *)mh;
4411 
4412 	return (mip->mi_rx_group_count);
4413 }
4414