1 /* 2 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 3 * Use is subject to license terms. 4 */ 5 6 /* 7 * Copyright 2005-06 Adaptec, Inc. 8 * Copyright (c) 2005-06 Adaptec Inc., Achim Leubner 9 * Copyright (c) 2000 Michael Smith 10 * Copyright (c) 2001 Scott Long 11 * Copyright (c) 2000 BSDi 12 * All rights reserved. 13 * 14 * Redistribution and use in source and binary forms, with or without 15 * modification, are permitted provided that the following conditions 16 * are met: 17 * 1. Redistributions of source code must retain the above copyright 18 * notice, this list of conditions and the following disclaimer. 19 * 2. Redistributions in binary form must reproduce the above copyright 20 * notice, this list of conditions and the following disclaimer in the 21 * documentation and/or other materials provided with the distribution. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * $FreeBSD: src/sys/dev/aac/aacvar.h,v 1.47 2005/10/08 15:55:09 scottl Exp $ 36 */ 37 38 #ifndef _AAC_H_ 39 #define _AAC_H_ 40 41 #ifdef __cplusplus 42 extern "C" { 43 #endif 44 45 #define AAC_ROUNDUP(x, y) (((x) + (y) - 1) / (y) * (y)) 46 47 #define AAC_TYPE_DEVO 1 48 #define AAC_TYPE_ALPHA 2 49 #define AAC_TYPE_BETA 3 50 #define AAC_TYPE_RELEASE 4 51 52 #ifndef AAC_DRIVER_BUILD 53 #define AAC_DRIVER_BUILD 1 54 #endif 55 56 #define AAC_DRIVER_MAJOR_VERSION 2 57 #define AAC_DRIVER_MINOR_VERSION 2 58 #define AAC_DRIVER_BUGFIX_LEVEL 10 59 #define AAC_DRIVER_TYPE AAC_TYPE_RELEASE 60 61 #define STR(s) # s 62 #define AAC_VERSION(a, b, c) STR(a.b.c) 63 #define AAC_DRIVER_VERSION AAC_VERSION(AAC_DRIVER_MAJOR_VERSION, \ 64 AAC_DRIVER_MINOR_VERSION, \ 65 AAC_DRIVER_BUGFIX_LEVEL) 66 67 #define AACOK 0 68 #define AACERR -1 69 70 #define AAC_MAX_ADAPTERS 64 71 72 /* Definitions for mode sense */ 73 #ifndef SD_MODE_SENSE_PAGE3_CODE 74 #define SD_MODE_SENSE_PAGE3_CODE 0x03 75 #endif 76 77 #ifndef SD_MODE_SENSE_PAGE4_CODE 78 #define SD_MODE_SENSE_PAGE4_CODE 0x04 79 #endif 80 81 #ifndef SCMD_SYNCHRONIZE_CACHE 82 #define SCMD_SYNCHRONIZE_CACHE 0x35 83 #endif 84 85 /* 86 * The controller reports status events in AIFs. We hang on to a number of 87 * these in order to pass them out to user-space management tools. 88 */ 89 #define AAC_AIFQ_LENGTH 64 90 91 #ifdef __x86 92 #define AAC_IMMEDIATE_TIMEOUT 30 /* seconds */ 93 #else 94 #define AAC_IMMEDIATE_TIMEOUT 60 /* seconds */ 95 #endif 96 #define AAC_FWUP_TIMEOUT 180 /* wait up to 3 minutes */ 97 #define AAC_IOCTL_TIMEOUT 900 /* wait up to 15 minutes */ 98 #define AAC_SYNC_TIMEOUT 900 /* wait up to 15 minutes */ 99 100 /* Adapter hardware interface types */ 101 #define AAC_HWIF_UNKNOWN 0 102 #define AAC_HWIF_I960RX 1 103 #define AAC_HWIF_RKT 2 104 105 #define AAC_TYPE_UNKNOWN 0 106 #define AAC_TYPE_SCSI 1 107 #define AAC_TYPE_SATA 2 108 #define AAC_TYPE_SAS 3 109 110 #define AAC_LS32(d) ((uint32_t)((d) & 0xffffffffull)) 111 #define AAC_MS32(d) ((uint32_t)((d) >> 32)) 112 #define AAC_LO32(p64) ((uint32_t *)(p64)) 113 #define AAC_HI32(p64) ((uint32_t *)(p64) + 1) 114 115 /* 116 * Internal events that will be handled serially by aac_event_thread() 117 */ 118 #define AAC_EVENT_AIF (1 << 0) 119 #define AAC_EVENT_TIMEOUT (1 << 1) 120 #define AAC_EVENT_SYNCTICK (1 << 2) 121 122 /* 123 * AAC_CMDQ_SYNC should be 0 and AAC_CMDQ_ASYNC be 1 for Sync FIB io 124 * to be served before async FIB io, see aac_start_waiting_io(). 125 * So that io requests sent by interactive userland commands get 126 * responded asap. 127 */ 128 enum aac_cmdq { 129 AAC_CMDQ_SYNC, /* sync FIB queue */ 130 AAC_CMDQ_ASYNC, /* async FIB queue */ 131 AAC_CMDQ_NUM 132 }; 133 134 /* 135 * IO command flags 136 */ 137 #define AAC_IOCMD_SYNC (1 << AAC_CMDQ_SYNC) 138 #define AAC_IOCMD_ASYNC (1 << AAC_CMDQ_ASYNC) 139 #define AAC_IOCMD_OUTSTANDING (1 << AAC_CMDQ_NUM) 140 #define AAC_IOCMD_ALL (AAC_IOCMD_SYNC | AAC_IOCMD_ASYNC | \ 141 AAC_IOCMD_OUTSTANDING) 142 143 struct aac_cmd_queue { 144 struct aac_cmd *q_head; /* also as the header of aac_cmd */ 145 struct aac_cmd *q_tail; 146 }; 147 148 struct aac_card_type { 149 uint16_t vendor; /* PCI Vendor ID */ 150 uint16_t device; /* PCI Device ID */ 151 uint16_t subvendor; /* PCI Subsystem Vendor ID */ 152 uint16_t subsys; /* PCI Subsystem ID */ 153 uint16_t hwif; /* card chip type: i960 or Rocket */ 154 uint16_t quirks; /* card odd limits */ 155 uint16_t type; /* hard drive type */ 156 char *vid; /* ASCII data for INQUIRY command vendor id */ 157 char *desc; /* ASCII data for INQUIRY command product id */ 158 }; 159 160 /* Device types */ 161 #define AAC_DEV_LD 0 /* logical device */ 162 #define AAC_DEV_PD 1 /* physical device */ 163 164 /* Device flags */ 165 #define AAC_DFLAG_VALID (1 << 0) 166 #define AAC_DFLAG_CONFIGURING (1 << 1) 167 168 #define AAC_DEV_IS_VALID(dvp) ((dvp)->flags & AAC_DFLAG_VALID) 169 170 /* 171 * Device config change events 172 */ 173 enum aac_cfg_event { 174 AAC_CFG_NULL_NOEXIST = 0, /* No change with no device */ 175 AAC_CFG_NULL_EXIST, /* No change but have device */ 176 AAC_CFG_ADD, /* Device added */ 177 AAC_CFG_DELETE, /* Device deleted */ 178 AAC_CFG_CHANGE /* Device changed */ 179 }; 180 181 struct aac_device { 182 int flags; 183 184 uint8_t type; 185 dev_info_t *dip; 186 int ncmds[AAC_CMDQ_NUM]; /* outstanding cmds of the device */ 187 int throttle[AAC_CMDQ_NUM]; /* hold IO cmds for the device */ 188 }; 189 190 /* Array description */ 191 struct aac_container { 192 struct aac_device dev; 193 194 uint32_t cid; /* container id */ 195 uint32_t uid; /* container uid */ 196 uint64_t size; /* in block */ 197 uint8_t locked; 198 uint8_t deleted; 199 uint8_t reset; /* container is being reseted */ 200 }; 201 202 /* Non-DASD phys. device descrption, eg. CDROM or tape */ 203 struct aac_nondasd { 204 struct aac_device dev; 205 206 uint32_t bus; 207 uint32_t tid; 208 }; 209 210 /* 211 * The firmware can support a lot of outstanding commands. Each aac_slot 212 * is corresponding to one of such commands. It records the command and 213 * associated DMA resource for FIB command. 214 */ 215 struct aac_slot { 216 struct aac_slot *next; /* next slot in the free slot list */ 217 int index; /* index of this slot */ 218 ddi_acc_handle_t fib_acc_handle; 219 ddi_dma_handle_t fib_dma_handle; 220 uint64_t fib_phyaddr; /* physical address of FIB memory */ 221 struct aac_cmd *acp; /* command using this slot */ 222 struct aac_fib *fibp; /* virtual address of FIB memory */ 223 }; 224 225 /* 226 * Scatter-gather list structure defined by HBA hardware 227 */ 228 struct aac_sge { 229 uint32_t bcount; /* byte count */ 230 union { 231 uint32_t ad32; /* 32 bit address */ 232 struct { 233 uint32_t lo; 234 uint32_t hi; 235 } ad64; /* 64 bit address */ 236 } addr; 237 }; 238 239 /* aac_cmd flags */ 240 #define AAC_CMD_CONSISTENT (1 << 0) 241 #define AAC_CMD_DMA_PARTIAL (1 << 1) 242 #define AAC_CMD_DMA_VALID (1 << 2) 243 #define AAC_CMD_BUF_READ (1 << 3) 244 #define AAC_CMD_BUF_WRITE (1 << 4) 245 #define AAC_CMD_SYNC (1 << 5) /* use sync FIB */ 246 #define AAC_CMD_NO_INTR (1 << 6) /* poll IO, no intr */ 247 #define AAC_CMD_NO_CB (1 << 7) /* sync IO, no callback */ 248 #define AAC_CMD_NTAG (1 << 8) 249 #define AAC_CMD_CMPLT (1 << 9) /* cmd exec'ed by driver/fw */ 250 #define AAC_CMD_ABORT (1 << 10) 251 #define AAC_CMD_TIMEOUT (1 << 11) 252 #define AAC_CMD_ERR (1 << 12) 253 #define AAC_CMD_IN_SYNC_SLOT (1 << 13) 254 255 struct aac_softstate; 256 typedef void (*aac_cmd_fib_t)(struct aac_softstate *, struct aac_cmd *); 257 258 struct aac_cmd { 259 /* 260 * Note: should be the first member for aac_cmd_queue to work 261 * correctly. 262 */ 263 struct aac_cmd *next; 264 struct aac_cmd *prev; 265 266 struct scsi_pkt *pkt; 267 int cmdlen; 268 int flags; 269 uint32_t timeout; /* time when the cmd should have completed */ 270 struct buf *bp; 271 ddi_dma_handle_t buf_dma_handle; 272 273 /* For non-aligned buffer and SRB */ 274 caddr_t abp; 275 ddi_acc_handle_t abh; 276 277 /* Data transfer state */ 278 ddi_dma_cookie_t cookie; 279 uint_t left_cookien; 280 uint_t cur_win; 281 uint_t total_nwin; 282 size_t total_xfer; 283 uint64_t blkno; 284 uint32_t bcount; /* buffer size in byte */ 285 struct aac_sge *sgt; /* sg table */ 286 287 /* FIB construct function */ 288 aac_cmd_fib_t aac_cmd_fib; 289 /* Call back function for completed command */ 290 void (*ac_comp)(struct aac_softstate *, struct aac_cmd *); 291 292 struct aac_slot *slotp; /* slot used by this command */ 293 struct aac_device *dvp; /* target device */ 294 295 /* FIB for this IO command */ 296 int fib_size; /* size of the FIB xferred to/from the card */ 297 struct aac_fib *fibp; 298 299 #ifdef DEBUG 300 uint32_t fib_flags; 301 #endif 302 }; 303 304 /* Flags for attach tracking */ 305 #define AAC_ATTACH_SOFTSTATE_ALLOCED (1 << 0) 306 #define AAC_ATTACH_CARD_DETECTED (1 << 1) 307 #define AAC_ATTACH_PCI_MEM_MAPPED (1 << 2) 308 #define AAC_ATTACH_KMUTEX_INITED (1 << 3) 309 #define AAC_ATTACH_SCSI_TRAN_SETUP (1 << 4) 310 #define AAC_ATTACH_COMM_SPACE_SETUP (1 << 5) 311 #define AAC_ATTACH_CREATE_DEVCTL (1 << 6) 312 #define AAC_ATTACH_CREATE_SCSI (1 << 7) 313 314 /* Driver running states */ 315 #define AAC_STATE_STOPPED 0 316 #define AAC_STATE_RUN (1 << 0) 317 #define AAC_STATE_RESET (1 << 1) 318 #define AAC_STATE_QUIESCED (1 << 2) 319 #define AAC_STATE_DEAD (1 << 3) 320 #define AAC_STATE_INTR (1 << 4) 321 322 /* 323 * Flags for aac firmware 324 * Note: Quirks are only valid for the older cards. These cards only supported 325 * old comm. Thus they are not valid for any cards that support new comm. 326 */ 327 #define AAC_FLAGS_SG_64BIT (1 << 0) /* Use 64-bit S/G addresses */ 328 #define AAC_FLAGS_4GB_WINDOW (1 << 1) /* Can access host mem 2-4GB range */ 329 #define AAC_FLAGS_NO4GB (1 << 2) /* quirk: FIB addresses must reside */ 330 /* between 0x2000 & 0x7FFFFFFF */ 331 #define AAC_FLAGS_256FIBS (1 << 3) /* quirk: Can only do 256 commands */ 332 #define AAC_FLAGS_NEW_COMM (1 << 4) /* New comm. interface supported */ 333 #define AAC_FLAGS_RAW_IO (1 << 5) /* Raw I/O interface */ 334 #define AAC_FLAGS_ARRAY_64BIT (1 << 6) /* 64-bit array size */ 335 #define AAC_FLAGS_LBA_64BIT (1 << 7) /* 64-bit LBA supported */ 336 #define AAC_FLAGS_17SG (1 << 8) /* quirk: 17 scatter gather maximum */ 337 #define AAC_FLAGS_34SG (1 << 9) /* quirk: 34 scatter gather maximum */ 338 #define AAC_FLAGS_NONDASD (1 << 10) /* non-DASD device supported */ 339 #define AAC_FLAGS_BRKUP (1 << 11) /* pkt breakup support */ 340 341 struct aac_softstate; 342 struct aac_interface { 343 int (*aif_get_fwstatus)(struct aac_softstate *); 344 int (*aif_get_mailbox)(struct aac_softstate *, int); 345 void (*aif_set_mailbox)(struct aac_softstate *, uint32_t, 346 uint32_t, uint32_t, uint32_t, uint32_t); 347 }; 348 349 #define AAC_CTXFLAG_FILLED 0x01 /* aifq's full for this ctx */ 350 #define AAC_CTXFLAG_RESETED 0x02 351 352 struct aac_fib_context { 353 uint32_t unique; 354 int ctx_idx; 355 int ctx_filled; /* aifq is full for this fib context */ 356 int ctx_flags; 357 int ctx_overrun; 358 struct aac_fib_context *next, *prev; 359 }; 360 361 #define AAC_VENDOR_LEN 8 362 #define AAC_PRODUCT_LEN 16 363 364 struct aac_softstate { 365 int card; /* index to aac_cards */ 366 uint16_t hwif; /* card chip type: i960 or Rocket */ 367 uint16_t vendid; /* vendor id */ 368 uint16_t subvendid; /* sub vendor id */ 369 uint16_t devid; /* device id */ 370 uint16_t subsysid; /* sub system id */ 371 char vendor_name[AAC_VENDOR_LEN + 1]; 372 char product_name[AAC_PRODUCT_LEN + 1]; 373 uint32_t support_opt; /* firmware features */ 374 uint32_t support_opt2; 375 uint32_t feature_bits; 376 uint32_t atu_size; /* actual size of PCI mem space */ 377 uint32_t map_size; /* mapped PCI mem space size */ 378 uint32_t map_size_min; /* minimum size of PCI mem that must be */ 379 /* mapped to address the card */ 380 int flags; /* firmware features enabled */ 381 int instance; 382 dev_info_t *devinfo_p; 383 scsi_hba_tran_t *hba_tran; 384 int slen; 385 int legacy; /* legacy device naming */ 386 uint32_t dma_max; /* for buf breakup */ 387 388 /* DMA attributes */ 389 ddi_dma_attr_t buf_dma_attr; 390 ddi_dma_attr_t addr_dma_attr; 391 392 /* PCI spaces */ 393 ddi_device_acc_attr_t acc_attr; 394 ddi_device_acc_attr_t reg_attr; 395 ddi_acc_handle_t pci_mem_handle; 396 uint8_t *pci_mem_base_vaddr; 397 uint32_t pci_mem_base_paddr; 398 399 struct aac_interface aac_if; /* adapter hardware interface */ 400 401 struct aac_cmd sync_ac; /* sync FIB */ 402 403 /* Communication space */ 404 struct aac_comm_space *comm_space; 405 ddi_acc_handle_t comm_space_acc_handle; 406 ddi_dma_handle_t comm_space_dma_handle; 407 uint32_t comm_space_phyaddr; 408 409 /* Old Comm. interface: message queues */ 410 struct aac_queue_table *qtablep; 411 struct aac_queue_entry *qentries[AAC_QUEUE_COUNT]; 412 413 /* New Comm. interface */ 414 uint32_t aac_max_fibs; /* max. FIB count */ 415 uint32_t aac_max_fib_size; /* max. FIB size */ 416 uint32_t aac_sg_tablesize; /* max. sg count from host */ 417 uint32_t aac_max_sectors; /* max. I/O size from host (blocks) */ 418 419 aac_cmd_fib_t aac_cmd_fib; /* IO cmd FIB construct function */ 420 aac_cmd_fib_t aac_cmd_fib_scsi; /* SRB construct function */ 421 422 ddi_softintr_t softint_id; /* soft intr */ 423 424 kmutex_t io_lock; 425 int state; /* driver state */ 426 427 struct aac_container containers[AAC_MAX_LD]; 428 int container_count; /* max container id + 1 */ 429 struct aac_nondasd *nondasds; 430 uint32_t bus_max; /* max FW buses exposed */ 431 uint32_t tgt_max; /* max FW target per bus */ 432 433 /* 434 * Command queues 435 * Each aac command flows through wait(or wait_sync) queue, 436 * busy queue, and complete queue sequentially. 437 */ 438 struct aac_cmd_queue q_wait[AAC_CMDQ_NUM]; 439 struct aac_cmd_queue q_busy; /* outstanding cmd queue */ 440 kmutex_t q_comp_mutex; 441 struct aac_cmd_queue q_comp; /* completed io requests */ 442 443 /* I/O slots and FIBs */ 444 int total_slots; /* total slots allocated */ 445 int total_fibs; /* total FIBs allocated */ 446 struct aac_slot *io_slot; /* static list for allocated slots */ 447 struct aac_slot *free_io_slot_head; 448 449 kcondvar_t event; /* for ioctl_send_fib() and sync IO */ 450 kcondvar_t sync_fib_cv; /* for sync_fib_slot_bind/release */ 451 452 int bus_ncmds[AAC_CMDQ_NUM]; /* total outstanding async cmds */ 453 int bus_throttle[AAC_CMDQ_NUM]; /* hold IO cmds for the bus */ 454 int ndrains; /* number of draining threads */ 455 timeout_id_t drain_timeid; /* for outstanding cmd drain */ 456 kcondvar_t drain_cv; /* for quiesce drain */ 457 458 /* Internal timer */ 459 kmutex_t time_mutex; 460 timeout_id_t timeout_id; /* for timeout daemon */ 461 uint32_t timebase; /* internal timer in seconds */ 462 uint32_t time_sync; /* next time to sync with firmware */ 463 uint32_t time_out; /* next time to check timeout */ 464 uint32_t time_throttle; /* next time to restore throttle */ 465 466 /* Internal events handling */ 467 kmutex_t ev_lock; 468 int events; 469 kthread_t *event_thread; /* for AIF & timeout */ 470 kcondvar_t event_wait_cv; 471 kcondvar_t event_disp_cv; 472 473 /* AIF */ 474 kmutex_t aifq_mutex; /* for AIF queue aifq */ 475 kcondvar_t aifq_cv; 476 union aac_fib_align aifq[AAC_AIFQ_LENGTH]; 477 int aifq_idx; /* slot for next new AIF */ 478 int aifq_wrap; /* AIF queue has ever been wrapped */ 479 struct aac_fib_context aifctx; /* sys aif ctx */ 480 struct aac_fib_context *fibctx_p; 481 int devcfg_wait_on; /* AIF event waited for rescan */ 482 483 int fm_capabilities; 484 485 /* MSI specific fields */ 486 ddi_intr_handle_t *htable; /* For array of interrupts */ 487 int intr_type; /* What type of interrupt */ 488 int intr_cnt; /* # of intrs count returned */ 489 int intr_size; 490 uint_t intr_pri; /* Interrupt priority */ 491 int intr_cap; /* Interrupt capabilities */ 492 493 #ifdef DEBUG 494 /* UART trace printf variables */ 495 uint32_t debug_flags; /* debug print flags bitmap */ 496 uint32_t debug_fib_flags; /* debug FIB print flags bitmap */ 497 uint32_t debug_fw_flags; /* FW debug flags */ 498 uint32_t debug_buf_offset; /* offset from DPMEM start */ 499 uint32_t debug_buf_size; /* FW debug buffer size in bytes */ 500 uint32_t debug_header_size; /* size of debug header */ 501 #endif 502 }; 503 504 /* 505 * The following data are kept stable because they are only written at driver 506 * initialization, and we do not allow them changed otherwise even at driver 507 * re-initialization. 508 */ 509 _NOTE(SCHEME_PROTECTS_DATA("stable data", aac_softstate::{flags slen \ 510 buf_dma_attr pci_mem_handle pci_mem_base_vaddr \ 511 comm_space_acc_handle comm_space_dma_handle aac_max_fib_size \ 512 aac_sg_tablesize aac_cmd_fib aac_cmd_fib_scsi debug_flags bus_max tgt_max})) 513 514 #ifdef DEBUG 515 516 #define AACDB_FLAGS_MASK 0x0000ffff 517 #define AACDB_FLAGS_KERNEL_PRINT 0x00000001 518 #define AACDB_FLAGS_FW_PRINT 0x00000002 519 #define AACDB_FLAGS_NO_HEADERS 0x00000004 520 521 #define AACDB_FLAGS_MISC 0x00000010 522 #define AACDB_FLAGS_FUNC1 0x00000020 523 #define AACDB_FLAGS_FUNC2 0x00000040 524 #define AACDB_FLAGS_SCMD 0x00000080 525 #define AACDB_FLAGS_AIF 0x00000100 526 #define AACDB_FLAGS_FIB 0x00000200 527 #define AACDB_FLAGS_IOCTL 0x00000400 528 529 /* 530 * Flags for FIB print 531 */ 532 /* FIB sources */ 533 #define AACDB_FLAGS_FIB_SCMD 0x00000001 534 #define AACDB_FLAGS_FIB_IOCTL 0x00000002 535 #define AACDB_FLAGS_FIB_SRB 0x00000004 536 #define AACDB_FLAGS_FIB_SYNC 0x00000008 537 /* FIB components */ 538 #define AACDB_FLAGS_FIB_HEADER 0x00000010 539 /* FIB states */ 540 #define AACDB_FLAGS_FIB_TIMEOUT 0x00000100 541 542 extern uint32_t aac_debug_flags; 543 extern int aac_dbflag_on(struct aac_softstate *, int); 544 extern void aac_printf(struct aac_softstate *, uint_t, const char *, ...); 545 extern void aac_print_fib(struct aac_softstate *, struct aac_slot *); 546 547 #define AACDB_PRINT(s, lev, ...) { \ 548 if (aac_dbflag_on((s), AACDB_FLAGS_MISC)) \ 549 aac_printf((s), (lev), __VA_ARGS__); } 550 551 #define AACDB_PRINT_IOCTL(s, ...) { \ 552 if (aac_dbflag_on((s), AACDB_FLAGS_IOCTL)) \ 553 aac_printf((s), CE_NOTE, __VA_ARGS__); } 554 555 #define AACDB_PRINT_TRAN(s, ...) { \ 556 if (aac_dbflag_on((s), AACDB_FLAGS_SCMD)) \ 557 aac_printf((s), CE_NOTE, __VA_ARGS__); } 558 559 #define DBCALLED(s, n) { \ 560 if (aac_dbflag_on((s), AACDB_FLAGS_FUNC ## n)) \ 561 aac_printf((s), CE_NOTE, "--- %s() called ---", __func__); } 562 563 #define AACDB_PRINT_SCMD(s, x) { \ 564 if (aac_dbflag_on((s), AACDB_FLAGS_SCMD)) aac_print_scmd((s), (x)); } 565 566 #define AACDB_PRINT_AIF(s, x) { \ 567 if (aac_dbflag_on((s), AACDB_FLAGS_AIF)) aac_print_aif((s), (x)); } 568 569 #define AACDB_PRINT_FIB(s, x) { \ 570 if (aac_dbflag_on((s), AACDB_FLAGS_FIB)) aac_print_fib((s), (x)); } 571 572 #else /* DEBUG */ 573 574 #define AACDB_PRINT(s, lev, ...) 575 #define AACDB_PRINT_IOCTL(s, ...) 576 #define AACDB_PRINT_TRAN(s, ...) 577 #define AACDB_PRINT_FIB(s, x) 578 #define AACDB_PRINT_SCMD(s, x) 579 #define AACDB_PRINT_AIF(s, x) 580 #define DBCALLED(s, n) 581 582 #endif /* DEBUG */ 583 584 #ifdef __cplusplus 585 } 586 #endif 587 588 #endif /* _AAC_H_ */ 589