1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_ZIL_H 27 #define _SYS_ZIL_H 28 29 #include <sys/types.h> 30 #include <sys/spa.h> 31 #include <sys/zio.h> 32 #include <sys/dmu.h> 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 /* 39 * Intent log format: 40 * 41 * Each objset has its own intent log. The log header (zil_header_t) 42 * for objset N's intent log is kept in the Nth object of the SPA's 43 * intent_log objset. The log header points to a chain of log blocks, 44 * each of which contains log records (i.e., transactions) followed by 45 * a log block trailer (zil_trailer_t). The format of a log record 46 * depends on the record (or transaction) type, but all records begin 47 * with a common structure that defines the type, length, and txg. 48 */ 49 50 /* 51 * Intent log header - this on disk structure holds fields to manage 52 * the log. All fields are 64 bit to easily handle cross architectures. 53 */ 54 typedef struct zil_header { 55 uint64_t zh_claim_txg; /* txg in which log blocks were claimed */ 56 uint64_t zh_replay_seq; /* highest replayed sequence number */ 57 blkptr_t zh_log; /* log chain */ 58 uint64_t zh_claim_seq; /* highest claimed sequence number */ 59 uint64_t zh_flags; /* header flags */ 60 uint64_t zh_pad[4]; 61 } zil_header_t; 62 63 /* 64 * zh_flags bit settings 65 */ 66 #define ZIL_REPLAY_NEEDED 0x1 /* replay needed - internal only */ 67 68 /* 69 * Log block trailer - structure at the end of the header and each log block 70 * 71 * The zit_bt contains a zbt_cksum which for the intent log is 72 * the sequence number of this log block. A seq of 0 is invalid. 73 * The zbt_cksum is checked by the SPA against the sequence 74 * number passed in the blk_cksum field of the blkptr_t 75 */ 76 typedef struct zil_trailer { 77 uint64_t zit_pad; 78 blkptr_t zit_next_blk; /* next block in chain */ 79 uint64_t zit_nused; /* bytes in log block used */ 80 zio_block_tail_t zit_bt; /* block trailer */ 81 } zil_trailer_t; 82 83 #define ZIL_MIN_BLKSZ 4096ULL 84 #define ZIL_MAX_BLKSZ SPA_MAXBLOCKSIZE 85 #define ZIL_BLK_DATA_SZ(lwb) ((lwb)->lwb_sz - sizeof (zil_trailer_t)) 86 87 /* 88 * The words of a log block checksum. 89 */ 90 #define ZIL_ZC_GUID_0 0 91 #define ZIL_ZC_GUID_1 1 92 #define ZIL_ZC_OBJSET 2 93 #define ZIL_ZC_SEQ 3 94 95 typedef enum zil_create { 96 Z_FILE, 97 Z_DIR, 98 Z_XATTRDIR, 99 } zil_create_t; 100 101 /* 102 * size of xvattr log section. 103 * its composed of lr_attr_t + xvattr bitmap + 2 64 bit timestamps 104 * for create time and a single 64 bit integer for all of the attributes, 105 * and 4 64 bit integers (32 bytes) for the scanstamp. 106 * 107 */ 108 109 #define ZIL_XVAT_SIZE(mapsize) \ 110 sizeof (lr_attr_t) + (sizeof (uint32_t) * (mapsize - 1)) + \ 111 (sizeof (uint64_t) * 7) 112 113 /* 114 * Size of ACL in log. The ACE data is padded out to properly align 115 * on 8 byte boundary. 116 */ 117 118 #define ZIL_ACE_LENGTH(x) (roundup(x, sizeof (uint64_t))) 119 120 /* 121 * Intent log transaction types and record structures 122 */ 123 #define TX_CREATE 1 /* Create file */ 124 #define TX_MKDIR 2 /* Make directory */ 125 #define TX_MKXATTR 3 /* Make XATTR directory */ 126 #define TX_SYMLINK 4 /* Create symbolic link to a file */ 127 #define TX_REMOVE 5 /* Remove file */ 128 #define TX_RMDIR 6 /* Remove directory */ 129 #define TX_LINK 7 /* Create hard link to a file */ 130 #define TX_RENAME 8 /* Rename a file */ 131 #define TX_WRITE 9 /* File write */ 132 #define TX_TRUNCATE 10 /* Truncate a file */ 133 #define TX_SETATTR 11 /* Set file attributes */ 134 #define TX_ACL_V0 12 /* Set old formatted ACL */ 135 #define TX_ACL 13 /* Set ACL */ 136 #define TX_CREATE_ACL 14 /* create with ACL */ 137 #define TX_CREATE_ATTR 15 /* create + attrs */ 138 #define TX_CREATE_ACL_ATTR 16 /* create with ACL + attrs */ 139 #define TX_MKDIR_ACL 17 /* mkdir with ACL */ 140 #define TX_MKDIR_ATTR 18 /* mkdir with attr */ 141 #define TX_MKDIR_ACL_ATTR 19 /* mkdir with ACL + attrs */ 142 #define TX_MAX_TYPE 20 /* Max transaction type */ 143 144 /* 145 * The transactions for mkdir, symlink, remove, rmdir, link, and rename 146 * may have the following bit set, indicating the original request 147 * specified case-insensitive handling of names. 148 */ 149 #define TX_CI ((uint64_t)0x1 << 63) /* case-insensitive behavior requested */ 150 151 /* 152 * Format of log records. 153 * The fields are carefully defined to allow them to be aligned 154 * and sized the same on sparc & intel architectures. 155 * Each log record has a common structure at the beginning. 156 * 157 * Note, lrc_seq holds two different sequence numbers. Whilst in memory 158 * it contains the transaction sequence number. The log record on 159 * disk holds the sequence number of all log records which is used to 160 * ensure we don't replay the same record. The two sequence numbers are 161 * different because the transactions can now be pushed out of order. 162 */ 163 typedef struct { /* common log record header */ 164 uint64_t lrc_txtype; /* intent log transaction type */ 165 uint64_t lrc_reclen; /* transaction record length */ 166 uint64_t lrc_txg; /* dmu transaction group number */ 167 uint64_t lrc_seq; /* see comment above */ 168 } lr_t; 169 170 /* 171 * Handle option extended vattr attributes. 172 * 173 * Whenever new attributes are added the version number 174 * will need to be updated as will code in 175 * zfs_log.c and zfs_replay.c 176 */ 177 typedef struct { 178 uint32_t lr_attr_masksize; /* number of elements in array */ 179 uint32_t lr_attr_bitmap; /* First entry of array */ 180 /* remainder of array and any additional fields */ 181 } lr_attr_t; 182 183 /* 184 * log record for creates without optional ACL. 185 * This log record does support optional xvattr_t attributes. 186 */ 187 typedef struct { 188 lr_t lr_common; /* common portion of log record */ 189 uint64_t lr_doid; /* object id of directory */ 190 uint64_t lr_foid; /* object id of created file object */ 191 uint64_t lr_mode; /* mode of object */ 192 uint64_t lr_uid; /* uid of object */ 193 uint64_t lr_gid; /* gid of object */ 194 uint64_t lr_gen; /* generation (txg of creation) */ 195 uint64_t lr_crtime[2]; /* creation time */ 196 uint64_t lr_rdev; /* rdev of object to create */ 197 /* name of object to create follows this */ 198 /* for symlinks, link content follows name */ 199 /* for creates with xvattr data, the name follows the xvattr info */ 200 } lr_create_t; 201 202 /* 203 * FUID ACL record will be an array of ACEs from the original ACL. 204 * If this array includes ephemeral IDs, the record will also include 205 * an array of log-specific FUIDs to replace the ephemeral IDs. 206 * Only one copy of each unique domain will be present, so the log-specific 207 * FUIDs will use an index into a compressed domain table. On replay this 208 * information will be used to construct real FUIDs (and bypass idmap, 209 * since it may not be available). 210 */ 211 212 /* 213 * Log record for creates with optional ACL 214 * This log record is also used for recording any FUID 215 * information needed for replaying the create. If the 216 * file doesn't have any actual ACEs then the lr_aclcnt 217 * would be zero. 218 */ 219 typedef struct { 220 lr_create_t lr_create; /* common create portion */ 221 uint64_t lr_aclcnt; /* number of ACEs in ACL */ 222 uint64_t lr_domcnt; /* number of unique domains */ 223 uint64_t lr_fuidcnt; /* number of real fuids */ 224 uint64_t lr_acl_bytes; /* number of bytes in ACL */ 225 uint64_t lr_acl_flags; /* ACL flags */ 226 /* lr_acl_bytes number of variable sized ace's follows */ 227 /* if create is also setting xvattr's, then acl data follows xvattr */ 228 /* if ACE FUIDs are needed then they will follow the xvattr_t */ 229 /* Following the FUIDs will be the domain table information. */ 230 /* The FUIDs for the owner and group will be in the lr_create */ 231 /* portion of the record. */ 232 /* name follows ACL data */ 233 } lr_acl_create_t; 234 235 typedef struct { 236 lr_t lr_common; /* common portion of log record */ 237 uint64_t lr_doid; /* obj id of directory */ 238 /* name of object to remove follows this */ 239 } lr_remove_t; 240 241 typedef struct { 242 lr_t lr_common; /* common portion of log record */ 243 uint64_t lr_doid; /* obj id of directory */ 244 uint64_t lr_link_obj; /* obj id of link */ 245 /* name of object to link follows this */ 246 } lr_link_t; 247 248 typedef struct { 249 lr_t lr_common; /* common portion of log record */ 250 uint64_t lr_sdoid; /* obj id of source directory */ 251 uint64_t lr_tdoid; /* obj id of target directory */ 252 /* 2 strings: names of source and destination follow this */ 253 } lr_rename_t; 254 255 typedef struct { 256 lr_t lr_common; /* common portion of log record */ 257 uint64_t lr_foid; /* file object to write */ 258 uint64_t lr_offset; /* offset to write to */ 259 uint64_t lr_length; /* user data length to write */ 260 uint64_t lr_blkoff; /* offset represented by lr_blkptr */ 261 blkptr_t lr_blkptr; /* spa block pointer for replay */ 262 /* write data will follow for small writes */ 263 } lr_write_t; 264 265 typedef struct { 266 lr_t lr_common; /* common portion of log record */ 267 uint64_t lr_foid; /* object id of file to truncate */ 268 uint64_t lr_offset; /* offset to truncate from */ 269 uint64_t lr_length; /* length to truncate */ 270 } lr_truncate_t; 271 272 typedef struct { 273 lr_t lr_common; /* common portion of log record */ 274 uint64_t lr_foid; /* file object to change attributes */ 275 uint64_t lr_mask; /* mask of attributes to set */ 276 uint64_t lr_mode; /* mode to set */ 277 uint64_t lr_uid; /* uid to set */ 278 uint64_t lr_gid; /* gid to set */ 279 uint64_t lr_size; /* size to set */ 280 uint64_t lr_atime[2]; /* access time */ 281 uint64_t lr_mtime[2]; /* modification time */ 282 /* optional attribute lr_attr_t may be here */ 283 } lr_setattr_t; 284 285 typedef struct { 286 lr_t lr_common; /* common portion of log record */ 287 uint64_t lr_foid; /* obj id of file */ 288 uint64_t lr_aclcnt; /* number of acl entries */ 289 /* lr_aclcnt number of ace_t entries follow this */ 290 } lr_acl_v0_t; 291 292 typedef struct { 293 lr_t lr_common; /* common portion of log record */ 294 uint64_t lr_foid; /* obj id of file */ 295 uint64_t lr_aclcnt; /* number of ACEs in ACL */ 296 uint64_t lr_domcnt; /* number of unique domains */ 297 uint64_t lr_fuidcnt; /* number of real fuids */ 298 uint64_t lr_acl_bytes; /* number of bytes in ACL */ 299 uint64_t lr_acl_flags; /* ACL flags */ 300 /* lr_acl_bytes number of variable sized ace's follows */ 301 } lr_acl_t; 302 303 /* 304 * ZIL structure definitions, interface function prototype and globals. 305 */ 306 307 /* 308 * ZFS intent log transaction structure 309 */ 310 typedef enum { 311 WR_INDIRECT, /* indirect - a large write (dmu_sync() data */ 312 /* and put blkptr in log, rather than actual data) */ 313 WR_COPIED, /* immediate - data is copied into lr_write_t */ 314 WR_NEED_COPY, /* immediate - data needs to be copied if pushed */ 315 } itx_wr_state_t; 316 317 typedef struct itx { 318 list_node_t itx_node; /* linkage on zl_itx_list */ 319 void *itx_private; /* type-specific opaque data */ 320 itx_wr_state_t itx_wr_state; /* write state */ 321 uint8_t itx_sync; /* synchronous transaction */ 322 uint64_t itx_sod; /* record size on disk */ 323 lr_t itx_lr; /* common part of log record */ 324 /* followed by type-specific part of lr_xx_t and its immediate data */ 325 } itx_t; 326 327 328 /* 329 * zgd_t is passed through dmu_sync() to the callback routine zfs_get_done() 330 * to handle the cleanup of the dmu_sync() buffer write 331 */ 332 typedef struct { 333 zilog_t *zgd_zilog; /* zilog */ 334 blkptr_t *zgd_bp; /* block pointer */ 335 struct rl *zgd_rl; /* range lock */ 336 } zgd_t; 337 338 339 typedef void zil_parse_blk_func_t(zilog_t *zilog, blkptr_t *bp, void *arg, 340 uint64_t txg); 341 typedef void zil_parse_lr_func_t(zilog_t *zilog, lr_t *lr, void *arg, 342 uint64_t txg); 343 typedef int zil_replay_func_t(); 344 typedef int zil_get_data_t(void *arg, lr_write_t *lr, char *dbuf, zio_t *zio); 345 346 extern uint64_t zil_parse(zilog_t *zilog, zil_parse_blk_func_t *parse_blk_func, 347 zil_parse_lr_func_t *parse_lr_func, void *arg, uint64_t txg); 348 349 extern void zil_init(void); 350 extern void zil_fini(void); 351 352 extern zilog_t *zil_alloc(objset_t *os, zil_header_t *zh_phys); 353 extern void zil_free(zilog_t *zilog); 354 355 extern zilog_t *zil_open(objset_t *os, zil_get_data_t *get_data); 356 extern void zil_close(zilog_t *zilog); 357 358 extern void zil_replay(objset_t *os, void *arg, 359 zil_replay_func_t *replay_func[TX_MAX_TYPE]); 360 extern void zil_destroy(zilog_t *zilog, boolean_t keep_first); 361 extern void zil_rollback_destroy(zilog_t *zilog, dmu_tx_t *tx); 362 363 extern itx_t *zil_itx_create(uint64_t txtype, size_t lrsize); 364 extern uint64_t zil_itx_assign(zilog_t *zilog, itx_t *itx, dmu_tx_t *tx); 365 366 extern void zil_commit(zilog_t *zilog, uint64_t seq, uint64_t oid); 367 368 extern int zil_claim(char *osname, void *txarg); 369 extern int zil_check_log_chain(char *osname, void *txarg); 370 extern int zil_clear_log_chain(char *osname, void *txarg); 371 extern void zil_sync(zilog_t *zilog, dmu_tx_t *tx); 372 extern void zil_clean(zilog_t *zilog); 373 extern int zil_is_committed(zilog_t *zilog); 374 375 extern int zil_suspend(zilog_t *zilog); 376 extern void zil_resume(zilog_t *zilog); 377 378 extern void zil_add_block(zilog_t *zilog, blkptr_t *bp); 379 380 extern int zil_disable; 381 382 #ifdef __cplusplus 383 } 384 #endif 385 386 #endif /* _SYS_ZIL_H */ 387