1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 /* 32 * This file describes the interface that the DMU provides for its 33 * consumers. 34 * 35 * The DMU also interacts with the SPA. That interface is described in 36 * dmu_spa.h. 37 */ 38 39 #include <sys/inttypes.h> 40 #include <sys/types.h> 41 #include <sys/param.h> 42 #include <sys/cred.h> 43 44 #ifdef __cplusplus 45 extern "C" { 46 #endif 47 48 struct uio; 49 struct page; 50 struct vnode; 51 struct spa; 52 struct zilog; 53 struct zio; 54 struct blkptr; 55 struct zap_cursor; 56 struct dsl_dataset; 57 struct dsl_pool; 58 struct dnode; 59 struct drr_begin; 60 struct drr_end; 61 struct zbookmark; 62 struct spa; 63 struct nvlist; 64 struct objset_impl; 65 66 typedef struct objset objset_t; 67 typedef struct dmu_tx dmu_tx_t; 68 typedef struct dsl_dir dsl_dir_t; 69 70 typedef enum dmu_object_type { 71 DMU_OT_NONE, 72 /* general: */ 73 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 74 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 75 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 76 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 77 DMU_OT_BPLIST, /* UINT64 */ 78 DMU_OT_BPLIST_HDR, /* UINT64 */ 79 /* spa: */ 80 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 81 DMU_OT_SPACE_MAP, /* UINT64 */ 82 /* zil: */ 83 DMU_OT_INTENT_LOG, /* UINT64 */ 84 /* dmu: */ 85 DMU_OT_DNODE, /* DNODE */ 86 DMU_OT_OBJSET, /* OBJSET */ 87 /* dsl: */ 88 DMU_OT_DSL_DIR, /* UINT64 */ 89 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 90 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 91 DMU_OT_DSL_PROPS, /* ZAP */ 92 DMU_OT_DSL_DATASET, /* UINT64 */ 93 /* zpl: */ 94 DMU_OT_ZNODE, /* ZNODE */ 95 DMU_OT_OLDACL, /* Old ACL */ 96 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 97 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 98 DMU_OT_MASTER_NODE, /* ZAP */ 99 DMU_OT_UNLINKED_SET, /* ZAP */ 100 /* zvol: */ 101 DMU_OT_ZVOL, /* UINT8 */ 102 DMU_OT_ZVOL_PROP, /* ZAP */ 103 /* other; for testing only! */ 104 DMU_OT_PLAIN_OTHER, /* UINT8 */ 105 DMU_OT_UINT64_OTHER, /* UINT64 */ 106 DMU_OT_ZAP_OTHER, /* ZAP */ 107 /* new object types: */ 108 DMU_OT_ERROR_LOG, /* ZAP */ 109 DMU_OT_SPA_HISTORY, /* UINT8 */ 110 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 111 DMU_OT_POOL_PROPS, /* ZAP */ 112 DMU_OT_DSL_PERMS, /* ZAP */ 113 DMU_OT_ACL, /* ACL */ 114 DMU_OT_SYSACL, /* SYSACL */ 115 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 116 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 117 DMU_OT_NEXT_CLONES, /* ZAP */ 118 DMU_OT_SCRUB_QUEUE, /* ZAP */ 119 DMU_OT_NUMTYPES 120 } dmu_object_type_t; 121 122 typedef enum dmu_objset_type { 123 DMU_OST_NONE, 124 DMU_OST_META, 125 DMU_OST_ZFS, 126 DMU_OST_ZVOL, 127 DMU_OST_OTHER, /* For testing only! */ 128 DMU_OST_ANY, /* Be careful! */ 129 DMU_OST_NUMTYPES 130 } dmu_objset_type_t; 131 132 void byteswap_uint64_array(void *buf, size_t size); 133 void byteswap_uint32_array(void *buf, size_t size); 134 void byteswap_uint16_array(void *buf, size_t size); 135 void byteswap_uint8_array(void *buf, size_t size); 136 void zap_byteswap(void *buf, size_t size); 137 void zfs_oldacl_byteswap(void *buf, size_t size); 138 void zfs_acl_byteswap(void *buf, size_t size); 139 void zfs_znode_byteswap(void *buf, size_t size); 140 141 #define DS_MODE_NOHOLD 0 /* internal use only */ 142 #define DS_MODE_USER 1 /* simple access, no special needs */ 143 #define DS_MODE_OWNER 2 /* the "main" access, e.g. a mount */ 144 #define DS_MODE_TYPE_MASK 0x3 145 #define DS_MODE_TYPE(x) ((x) & DS_MODE_TYPE_MASK) 146 #define DS_MODE_READONLY 0x8 147 #define DS_MODE_IS_READONLY(x) ((x) & DS_MODE_READONLY) 148 #define DS_MODE_INCONSISTENT 0x10 149 #define DS_MODE_IS_INCONSISTENT(x) ((x) & DS_MODE_INCONSISTENT) 150 151 #define DS_FIND_SNAPSHOTS (1<<0) 152 #define DS_FIND_CHILDREN (1<<1) 153 154 /* 155 * The maximum number of bytes that can be accessed as part of one 156 * operation, including metadata. 157 */ 158 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 159 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 160 161 /* 162 * Public routines to create, destroy, open, and close objsets. 163 */ 164 int dmu_objset_open(const char *name, dmu_objset_type_t type, int mode, 165 objset_t **osp); 166 int dmu_objset_open_ds(struct dsl_dataset *ds, dmu_objset_type_t type, 167 objset_t **osp); 168 void dmu_objset_close(objset_t *os); 169 int dmu_objset_evict_dbufs(objset_t *os); 170 int dmu_objset_create(const char *name, dmu_objset_type_t type, 171 objset_t *clone_parent, uint64_t flags, 172 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 173 int dmu_objset_destroy(const char *name); 174 int dmu_snapshots_destroy(char *fsname, char *snapname); 175 int dmu_objset_rollback(objset_t *os); 176 int dmu_objset_snapshot(char *fsname, char *snapname, boolean_t recursive); 177 int dmu_objset_rename(const char *name, const char *newname, 178 boolean_t recursive); 179 int dmu_objset_find(char *name, int func(char *, void *), void *arg, 180 int flags); 181 void dmu_objset_byteswap(void *buf, size_t size); 182 183 typedef struct dmu_buf { 184 uint64_t db_object; /* object that this buffer is part of */ 185 uint64_t db_offset; /* byte offset in this object */ 186 uint64_t db_size; /* size of buffer in bytes */ 187 void *db_data; /* data in buffer */ 188 } dmu_buf_t; 189 190 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 191 192 /* 193 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 194 */ 195 #define DMU_POOL_DIRECTORY_OBJECT 1 196 #define DMU_POOL_CONFIG "config" 197 #define DMU_POOL_ROOT_DATASET "root_dataset" 198 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 199 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 200 #define DMU_POOL_ERRLOG_LAST "errlog_last" 201 #define DMU_POOL_SPARES "spares" 202 #define DMU_POOL_DEFLATE "deflate" 203 #define DMU_POOL_HISTORY "history" 204 #define DMU_POOL_PROPS "pool_props" 205 #define DMU_POOL_L2CACHE "l2cache" 206 207 /* 4x8 zbookmark_t */ 208 #define DMU_POOL_SCRUB_BOOKMARK "scrub_bookmark" 209 /* 1x8 zap obj DMU_OT_SCRUB_QUEUE */ 210 #define DMU_POOL_SCRUB_QUEUE "scrub_queue" 211 /* 1x8 txg */ 212 #define DMU_POOL_SCRUB_MIN_TXG "scrub_min_txg" 213 /* 1x8 txg */ 214 #define DMU_POOL_SCRUB_MAX_TXG "scrub_max_txg" 215 /* 1x4 enum scrub_func */ 216 #define DMU_POOL_SCRUB_FUNC "scrub_func" 217 /* 1x8 count */ 218 #define DMU_POOL_SCRUB_ERRORS "scrub_errors" 219 220 /* 221 * Allocate an object from this objset. The range of object numbers 222 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 223 * 224 * The transaction must be assigned to a txg. The newly allocated 225 * object will be "held" in the transaction (ie. you can modify the 226 * newly allocated object in this transaction). 227 * 228 * dmu_object_alloc() chooses an object and returns it in *objectp. 229 * 230 * dmu_object_claim() allocates a specific object number. If that 231 * number is already allocated, it fails and returns EEXIST. 232 * 233 * Return 0 on success, or ENOSPC or EEXIST as specified above. 234 */ 235 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 236 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 237 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 238 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 239 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 240 int blocksize, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 241 242 /* 243 * Free an object from this objset. 244 * 245 * The object's data will be freed as well (ie. you don't need to call 246 * dmu_free(object, 0, -1, tx)). 247 * 248 * The object need not be held in the transaction. 249 * 250 * If there are any holds on this object's buffers (via dmu_buf_hold()), 251 * or tx holds on the object (via dmu_tx_hold_object()), you can not 252 * free it; it fails and returns EBUSY. 253 * 254 * If the object is not allocated, it fails and returns ENOENT. 255 * 256 * Return 0 on success, or EBUSY or ENOENT as specified above. 257 */ 258 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 259 260 /* 261 * Find the next allocated or free object. 262 * 263 * The objectp parameter is in-out. It will be updated to be the next 264 * object which is allocated. Ignore objects which have not been 265 * modified since txg. 266 * 267 * XXX Can only be called on a objset with no dirty data. 268 * 269 * Returns 0 on success, or ENOENT if there are no more objects. 270 */ 271 int dmu_object_next(objset_t *os, uint64_t *objectp, 272 boolean_t hole, uint64_t txg); 273 274 /* 275 * Set the data blocksize for an object. 276 * 277 * The object cannot have any blocks allcated beyond the first. If 278 * the first block is allocated already, the new size must be greater 279 * than the current block size. If these conditions are not met, 280 * ENOTSUP will be returned. 281 * 282 * Returns 0 on success, or EBUSY if there are any holds on the object 283 * contents, or ENOTSUP as described above. 284 */ 285 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 286 int ibs, dmu_tx_t *tx); 287 288 /* 289 * Set the checksum property on a dnode. The new checksum algorithm will 290 * apply to all newly written blocks; existing blocks will not be affected. 291 */ 292 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 293 dmu_tx_t *tx); 294 295 /* 296 * Set the compress property on a dnode. The new compression algorithm will 297 * apply to all newly written blocks; existing blocks will not be affected. 298 */ 299 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 300 dmu_tx_t *tx); 301 302 /* 303 * Decide how many copies of a given block we should make. Can be from 304 * 1 to SPA_DVAS_PER_BP. 305 */ 306 int dmu_get_replication_level(struct objset_impl *, struct zbookmark *zb, 307 dmu_object_type_t ot); 308 /* 309 * The bonus data is accessed more or less like a regular buffer. 310 * You must dmu_bonus_hold() to get the buffer, which will give you a 311 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 312 * data. As with any normal buffer, you must call dmu_buf_read() to 313 * read db_data, dmu_buf_will_dirty() before modifying it, and the 314 * object must be held in an assigned transaction before calling 315 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 316 * buffer as well. You must release your hold with dmu_buf_rele(). 317 */ 318 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 319 int dmu_bonus_max(void); 320 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 321 322 /* 323 * Obtain the DMU buffer from the specified object which contains the 324 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 325 * that it will remain in memory. You must release the hold with 326 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 327 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 328 * 329 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 330 * on the returned buffer before reading or writing the buffer's 331 * db_data. The comments for those routines describe what particular 332 * operations are valid after calling them. 333 * 334 * The object number must be a valid, allocated object number. 335 */ 336 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 337 void *tag, dmu_buf_t **); 338 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 339 void dmu_buf_rele(dmu_buf_t *db, void *tag); 340 uint64_t dmu_buf_refcount(dmu_buf_t *db); 341 342 /* 343 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 344 * range of an object. A pointer to an array of dmu_buf_t*'s is 345 * returned (in *dbpp). 346 * 347 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 348 * frees the array. The hold on the array of buffers MUST be released 349 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 350 * individually with dmu_buf_rele. 351 */ 352 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 353 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 354 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 355 356 /* 357 * Returns NULL on success, or the existing user ptr if it's already 358 * been set. 359 * 360 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 361 * 362 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 363 * will be set to db->db_data when you are allowed to access it. Note 364 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 365 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 366 * *user_data_ptr_ptr will be set to the new value when it changes. 367 * 368 * If non-NULL, pageout func will be called when this buffer is being 369 * excised from the cache, so that you can clean up the data structure 370 * pointed to by user_ptr. 371 * 372 * dmu_evict_user() will call the pageout func for all buffers in a 373 * objset with a given pageout func. 374 */ 375 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 376 dmu_buf_evict_func_t *pageout_func); 377 /* 378 * set_user_ie is the same as set_user, but request immediate eviction 379 * when hold count goes to zero. 380 */ 381 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 382 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 383 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 384 void *user_ptr, void *user_data_ptr_ptr, 385 dmu_buf_evict_func_t *pageout_func); 386 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 387 388 /* 389 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 390 */ 391 void *dmu_buf_get_user(dmu_buf_t *db); 392 393 /* 394 * Indicate that you are going to modify the buffer's data (db_data). 395 * 396 * The transaction (tx) must be assigned to a txg (ie. you've called 397 * dmu_tx_assign()). The buffer's object must be held in the tx 398 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 399 */ 400 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 401 402 /* 403 * You must create a transaction, then hold the objects which you will 404 * (or might) modify as part of this transaction. Then you must assign 405 * the transaction to a transaction group. Once the transaction has 406 * been assigned, you can modify buffers which belong to held objects as 407 * part of this transaction. You can't modify buffers before the 408 * transaction has been assigned; you can't modify buffers which don't 409 * belong to objects which this transaction holds; you can't hold 410 * objects once the transaction has been assigned. You may hold an 411 * object which you are going to free (with dmu_object_free()), but you 412 * don't have to. 413 * 414 * You can abort the transaction before it has been assigned. 415 * 416 * Note that you may hold buffers (with dmu_buf_hold) at any time, 417 * regardless of transaction state. 418 */ 419 420 #define DMU_NEW_OBJECT (-1ULL) 421 #define DMU_OBJECT_END (-1ULL) 422 423 dmu_tx_t *dmu_tx_create(objset_t *os); 424 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 425 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 426 uint64_t len); 427 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, char *name); 428 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 429 void dmu_tx_abort(dmu_tx_t *tx); 430 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 431 void dmu_tx_wait(dmu_tx_t *tx); 432 void dmu_tx_commit(dmu_tx_t *tx); 433 434 /* 435 * Free up the data blocks for a defined range of a file. If size is 436 * zero, the range from offset to end-of-file is freed. 437 */ 438 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 439 uint64_t size, dmu_tx_t *tx); 440 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 441 uint64_t size); 442 int dmu_free_object(objset_t *os, uint64_t object); 443 444 /* 445 * Convenience functions. 446 * 447 * Canfail routines will return 0 on success, or an errno if there is a 448 * nonrecoverable I/O error. 449 */ 450 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 451 void *buf); 452 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 453 const void *buf, dmu_tx_t *tx); 454 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 455 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 456 dmu_tx_t *tx); 457 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 458 uint64_t size, struct page *pp, dmu_tx_t *tx); 459 460 extern int zfs_prefetch_disable; 461 462 /* 463 * Asynchronously try to read in the data. 464 */ 465 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 466 uint64_t len); 467 468 typedef struct dmu_object_info { 469 /* All sizes are in bytes. */ 470 uint32_t doi_data_block_size; 471 uint32_t doi_metadata_block_size; 472 uint64_t doi_bonus_size; 473 dmu_object_type_t doi_type; 474 dmu_object_type_t doi_bonus_type; 475 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 476 uint8_t doi_checksum; 477 uint8_t doi_compress; 478 uint8_t doi_pad[5]; 479 /* Values below are number of 512-byte blocks. */ 480 uint64_t doi_physical_blks; /* data + metadata */ 481 uint64_t doi_max_block_offset; 482 } dmu_object_info_t; 483 484 typedef void arc_byteswap_func_t(void *buf, size_t size); 485 486 typedef struct dmu_object_type_info { 487 arc_byteswap_func_t *ot_byteswap; 488 boolean_t ot_metadata; 489 char *ot_name; 490 } dmu_object_type_info_t; 491 492 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 493 494 /* 495 * Get information on a DMU object. 496 * 497 * Return 0 on success or ENOENT if object is not allocated. 498 * 499 * If doi is NULL, just indicates whether the object exists. 500 */ 501 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 502 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 503 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 504 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 505 u_longlong_t *nblk512); 506 507 typedef struct dmu_objset_stats { 508 uint64_t dds_num_clones; /* number of clones of this */ 509 uint64_t dds_creation_txg; 510 uint64_t dds_guid; 511 dmu_objset_type_t dds_type; 512 uint8_t dds_is_snapshot; 513 uint8_t dds_inconsistent; 514 char dds_origin[MAXNAMELEN]; 515 } dmu_objset_stats_t; 516 517 /* 518 * Get stats on a dataset. 519 */ 520 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 521 522 /* 523 * Add entries to the nvlist for all the objset's properties. See 524 * zfs_prop_table[] and zfs(1m) for details on the properties. 525 */ 526 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 527 528 /* 529 * Get the space usage statistics for statvfs(). 530 * 531 * refdbytes is the amount of space "referenced" by this objset. 532 * availbytes is the amount of space available to this objset, taking 533 * into account quotas & reservations, assuming that no other objsets 534 * use the space first. These values correspond to the 'referenced' and 535 * 'available' properties, described in the zfs(1m) manpage. 536 * 537 * usedobjs and availobjs are the number of objects currently allocated, 538 * and available. 539 */ 540 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 541 uint64_t *usedobjsp, uint64_t *availobjsp); 542 543 /* 544 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 545 * (Contrast with the ds_guid which is a 64-bit ID that will never 546 * change, so there is a small probability that it will collide.) 547 */ 548 uint64_t dmu_objset_fsid_guid(objset_t *os); 549 550 int dmu_objset_is_snapshot(objset_t *os); 551 552 extern struct spa *dmu_objset_spa(objset_t *os); 553 extern struct zilog *dmu_objset_zil(objset_t *os); 554 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 555 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 556 extern void dmu_objset_name(objset_t *os, char *buf); 557 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 558 extern uint64_t dmu_objset_id(objset_t *os); 559 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 560 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 561 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 562 int maxlen, boolean_t *conflict); 563 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 564 uint64_t *idp, uint64_t *offp); 565 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 566 extern void *dmu_objset_get_user(objset_t *os); 567 568 /* 569 * Return the txg number for the given assigned transaction. 570 */ 571 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 572 573 /* 574 * Synchronous write. 575 * If a parent zio is provided this function initiates a write on the 576 * provided buffer as a child of the parent zio. 577 * In the absence of a parent zio, the write is completed synchronously. 578 * At write completion, blk is filled with the bp of the written block. 579 * Note that while the data covered by this function will be on stable 580 * storage when the write completes this new data does not become a 581 * permanent part of the file until the associated transaction commits. 582 */ 583 typedef void dmu_sync_cb_t(dmu_buf_t *db, void *arg); 584 int dmu_sync(struct zio *zio, dmu_buf_t *db, 585 struct blkptr *bp, uint64_t txg, dmu_sync_cb_t *done, void *arg); 586 587 /* 588 * Find the next hole or data block in file starting at *off 589 * Return found offset in *off. Return ESRCH for end of file. 590 */ 591 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 592 uint64_t *off); 593 594 /* 595 * Initial setup and final teardown. 596 */ 597 extern void dmu_init(void); 598 extern void dmu_fini(void); 599 600 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 601 uint64_t object, uint64_t offset, int len); 602 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 603 dmu_traverse_cb_t cb, void *arg); 604 605 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin, 606 struct vnode *vp, offset_t *off); 607 608 typedef struct dmu_recv_cookie { 609 /* 610 * This structure is opaque! 611 * 612 * If logical and real are different, we are recving the stream 613 * into the "real" temporary clone, and then switching it with 614 * the "logical" target. 615 */ 616 struct dsl_dataset *drc_logical_ds; 617 struct dsl_dataset *drc_real_ds; 618 struct drr_begin *drc_drrb; 619 char *drc_tosnap; 620 boolean_t drc_newfs; 621 boolean_t drc_force; 622 } dmu_recv_cookie_t; 623 624 int dmu_recv_begin(char *tofs, char *tosnap, struct drr_begin *, 625 boolean_t force, objset_t *origin, boolean_t online, dmu_recv_cookie_t *); 626 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp); 627 int dmu_recv_end(dmu_recv_cookie_t *drc); 628 void dmu_recv_abort_cleanup(dmu_recv_cookie_t *drc); 629 630 /* CRC64 table */ 631 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 632 extern uint64_t zfs_crc64_table[256]; 633 634 #ifdef __cplusplus 635 } 636 #endif 637 638 #endif /* _SYS_DMU_H */ 639