1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 /* 32 * This file describes the interface that the DMU provides for its 33 * consumers. 34 * 35 * The DMU also interacts with the SPA. That interface is described in 36 * dmu_spa.h. 37 */ 38 39 #include <sys/inttypes.h> 40 #include <sys/types.h> 41 #include <sys/param.h> 42 43 #ifdef __cplusplus 44 extern "C" { 45 #endif 46 47 struct uio; 48 struct page; 49 struct vnode; 50 struct spa; 51 struct zilog; 52 struct zio; 53 struct blkptr; 54 struct zap_cursor; 55 struct dsl_dataset; 56 struct dsl_pool; 57 struct dnode; 58 struct drr_begin; 59 struct drr_end; 60 struct zbookmark; 61 struct spa; 62 struct nvlist; 63 64 typedef struct objset objset_t; 65 typedef struct dmu_tx dmu_tx_t; 66 typedef struct dsl_dir dsl_dir_t; 67 68 typedef enum dmu_object_type { 69 DMU_OT_NONE, 70 /* general: */ 71 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 72 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 73 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 74 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 75 DMU_OT_BPLIST, /* UINT64 */ 76 DMU_OT_BPLIST_HDR, /* UINT64 */ 77 /* spa: */ 78 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 79 DMU_OT_SPACE_MAP, /* UINT64 */ 80 /* zil: */ 81 DMU_OT_INTENT_LOG, /* UINT64 */ 82 /* dmu: */ 83 DMU_OT_DNODE, /* DNODE */ 84 DMU_OT_OBJSET, /* OBJSET */ 85 /* dsl: */ 86 DMU_OT_DSL_DIR, /* UINT64 */ 87 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 88 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 89 DMU_OT_DSL_PROPS, /* ZAP */ 90 DMU_OT_DSL_DATASET, /* UINT64 */ 91 /* zpl: */ 92 DMU_OT_ZNODE, /* ZNODE */ 93 DMU_OT_ACL, /* ACL */ 94 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 95 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 96 DMU_OT_MASTER_NODE, /* ZAP */ 97 DMU_OT_DELETE_QUEUE, /* ZAP */ 98 /* zvol: */ 99 DMU_OT_ZVOL, /* UINT8 */ 100 DMU_OT_ZVOL_PROP, /* ZAP */ 101 /* other; for testing only! */ 102 DMU_OT_PLAIN_OTHER, /* UINT8 */ 103 DMU_OT_UINT64_OTHER, /* UINT64 */ 104 DMU_OT_ZAP_OTHER, /* ZAP */ 105 /* new object types: */ 106 DMU_OT_ERROR_LOG, /* ZAP */ 107 DMU_OT_SPA_HISTORY, /* UINT8 */ 108 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 109 110 DMU_OT_NUMTYPES 111 } dmu_object_type_t; 112 113 typedef enum dmu_objset_type { 114 DMU_OST_NONE, 115 DMU_OST_META, 116 DMU_OST_ZFS, 117 DMU_OST_ZVOL, 118 DMU_OST_OTHER, /* For testing only! */ 119 DMU_OST_ANY, /* Be careful! */ 120 DMU_OST_NUMTYPES 121 } dmu_objset_type_t; 122 123 void byteswap_uint64_array(void *buf, size_t size); 124 void byteswap_uint32_array(void *buf, size_t size); 125 void byteswap_uint16_array(void *buf, size_t size); 126 void byteswap_uint8_array(void *buf, size_t size); 127 void zap_byteswap(void *buf, size_t size); 128 void zfs_acl_byteswap(void *buf, size_t size); 129 void zfs_znode_byteswap(void *buf, size_t size); 130 131 #define DS_MODE_NONE 0 /* invalid, to aid debugging */ 132 #define DS_MODE_STANDARD 1 /* normal access, no special needs */ 133 #define DS_MODE_PRIMARY 2 /* the "main" access, e.g. a mount */ 134 #define DS_MODE_EXCLUSIVE 3 /* exclusive access, e.g. to destroy */ 135 #define DS_MODE_LEVELS 4 136 #define DS_MODE_LEVEL(x) ((x) & (DS_MODE_LEVELS - 1)) 137 #define DS_MODE_READONLY 0x8 138 #define DS_MODE_IS_READONLY(x) ((x) & DS_MODE_READONLY) 139 #define DS_MODE_INCONSISTENT 0x10 140 #define DS_MODE_IS_INCONSISTENT(x) ((x) & DS_MODE_INCONSISTENT) 141 142 #define DS_FIND_SNAPSHOTS (1<<0) 143 #define DS_FIND_CHILDREN (1<<1) 144 145 /* 146 * The maximum number of bytes that can be accessed as part of one 147 * operation, including metadata. 148 */ 149 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 150 151 /* 152 * Public routines to create, destroy, open, and close objsets. 153 */ 154 int dmu_objset_open(const char *name, dmu_objset_type_t type, int mode, 155 objset_t **osp); 156 void dmu_objset_close(objset_t *os); 157 int dmu_objset_evict_dbufs(objset_t *os, int try); 158 int dmu_objset_create(const char *name, dmu_objset_type_t type, 159 objset_t *clone_parent, 160 void (*func)(objset_t *os, void *arg, dmu_tx_t *tx), void *arg); 161 int dmu_objset_destroy(const char *name); 162 int dmu_snapshots_destroy(char *fsname, char *snapname); 163 int dmu_objset_rollback(const char *name); 164 int dmu_objset_snapshot(char *fsname, char *snapname, boolean_t recursive); 165 int dmu_objset_rename(const char *name, const char *newname); 166 int dmu_objset_find(char *name, int func(char *, void *), void *arg, 167 int flags); 168 void dmu_objset_byteswap(void *buf, size_t size); 169 170 typedef struct dmu_buf { 171 uint64_t db_object; /* object that this buffer is part of */ 172 uint64_t db_offset; /* byte offset in this object */ 173 uint64_t db_size; /* size of buffer in bytes */ 174 void *db_data; /* data in buffer */ 175 } dmu_buf_t; 176 177 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 178 179 /* 180 * Callback function to perform byte swapping on a block. 181 */ 182 typedef void dmu_byteswap_func_t(void *buf, size_t size); 183 184 /* 185 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 186 */ 187 #define DMU_POOL_DIRECTORY_OBJECT 1 188 #define DMU_POOL_CONFIG "config" 189 #define DMU_POOL_ROOT_DATASET "root_dataset" 190 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 191 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 192 #define DMU_POOL_ERRLOG_LAST "errlog_last" 193 #define DMU_POOL_SPARES "spares" 194 #define DMU_POOL_DEFLATE "deflate" 195 #define DMU_POOL_HISTORY "history" 196 197 /* 198 * Allocate an object from this objset. The range of object numbers 199 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 200 * 201 * The transaction must be assigned to a txg. The newly allocated 202 * object will be "held" in the transaction (ie. you can modify the 203 * newly allocated object in this transaction). 204 * 205 * dmu_object_alloc() chooses an object and returns it in *objectp. 206 * 207 * dmu_object_claim() allocates a specific object number. If that 208 * number is already allocated, it fails and returns EEXIST. 209 * 210 * Return 0 on success, or ENOSPC or EEXIST as specified above. 211 */ 212 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 213 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 214 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 215 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 216 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 217 int blocksize, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 218 219 /* 220 * Free an object from this objset. 221 * 222 * The object's data will be freed as well (ie. you don't need to call 223 * dmu_free(object, 0, -1, tx)). 224 * 225 * The object need not be held in the transaction. 226 * 227 * If there are any holds on this object's buffers (via dmu_buf_hold()), 228 * or tx holds on the object (via dmu_tx_hold_object()), you can not 229 * free it; it fails and returns EBUSY. 230 * 231 * If the object is not allocated, it fails and returns ENOENT. 232 * 233 * Return 0 on success, or EBUSY or ENOENT as specified above. 234 */ 235 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 236 237 /* 238 * Find the next allocated or free object. 239 * 240 * The objectp parameter is in-out. It will be updated to be the next 241 * object which is allocated. Ignore objects which have not been 242 * modified since txg. 243 * 244 * XXX Can only be called on a objset with no dirty data. 245 * 246 * Returns 0 on success, or ENOENT if there are no more objects. 247 */ 248 int dmu_object_next(objset_t *os, uint64_t *objectp, 249 boolean_t hole, uint64_t txg); 250 251 /* 252 * Set the data blocksize for an object. 253 * 254 * The object cannot have any blocks allcated beyond the first. If 255 * the first block is allocated already, the new size must be greater 256 * than the current block size. If these conditions are not met, 257 * ENOTSUP will be returned. 258 * 259 * Returns 0 on success, or EBUSY if there are any holds on the object 260 * contents, or ENOTSUP as described above. 261 */ 262 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 263 int ibs, dmu_tx_t *tx); 264 265 /* 266 * Set the checksum property on a dnode. The new checksum algorithm will 267 * apply to all newly written blocks; existing blocks will not be affected. 268 */ 269 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 270 dmu_tx_t *tx); 271 272 /* 273 * Set the compress property on a dnode. The new compression algorithm will 274 * apply to all newly written blocks; existing blocks will not be affected. 275 */ 276 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 277 dmu_tx_t *tx); 278 279 /* 280 * Decide how many copies of a given block we should make. Can be from 281 * 1 to SPA_DVAS_PER_BP. 282 */ 283 int dmu_get_replication_level(struct spa *spa, struct zbookmark *zb, 284 dmu_object_type_t ot); 285 /* 286 * The bonus data is accessed more or less like a regular buffer. 287 * You must dmu_bonus_hold() to get the buffer, which will give you a 288 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 289 * data. As with any normal buffer, you must call dmu_buf_read() to 290 * read db_data, dmu_buf_will_dirty() before modifying it, and the 291 * object must be held in an assigned transaction before calling 292 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 293 * buffer as well. You must release your hold with dmu_buf_rele(). 294 */ 295 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 296 int dmu_bonus_max(void); 297 298 /* 299 * Obtain the DMU buffer from the specified object which contains the 300 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 301 * that it will remain in memory. You must release the hold with 302 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 303 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 304 * 305 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 306 * on the returned buffer before reading or writing the buffer's 307 * db_data. The comments for those routines describe what particular 308 * operations are valid after calling them. 309 * 310 * The object number must be a valid, allocated object number. 311 */ 312 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 313 void *tag, dmu_buf_t **); 314 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 315 void dmu_buf_rele(dmu_buf_t *db, void *tag); 316 uint64_t dmu_buf_refcount(dmu_buf_t *db); 317 318 /* 319 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 320 * range of an object. A pointer to an array of dmu_buf_t*'s is 321 * returned (in *dbpp). 322 * 323 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 324 * frees the array. The hold on the array of buffers MUST be released 325 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 326 * individually with dmu_buf_rele. 327 */ 328 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 329 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 330 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 331 332 /* 333 * Returns NULL on success, or the existing user ptr if it's already 334 * been set. 335 * 336 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 337 * 338 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 339 * will be set to db->db_data when you are allowed to access it. Note 340 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 341 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 342 * *user_data_ptr_ptr will be set to the new value when it changes. 343 * 344 * If non-NULL, pageout func will be called when this buffer is being 345 * excised from the cache, so that you can clean up the data structure 346 * pointed to by user_ptr. 347 * 348 * dmu_evict_user() will call the pageout func for all buffers in a 349 * objset with a given pageout func. 350 */ 351 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 352 dmu_buf_evict_func_t *pageout_func); 353 /* 354 * set_user_ie is the same as set_user, but request immediate eviction 355 * when hold count goes to zero. 356 */ 357 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 358 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 359 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 360 void *user_ptr, void *user_data_ptr_ptr, 361 dmu_buf_evict_func_t *pageout_func); 362 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 363 364 /* 365 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 366 */ 367 void *dmu_buf_get_user(dmu_buf_t *db); 368 369 /* 370 * Indicate that you are going to modify the buffer's data (db_data). 371 * 372 * The transaction (tx) must be assigned to a txg (ie. you've called 373 * dmu_tx_assign()). The buffer's object must be held in the tx 374 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 375 */ 376 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 377 378 /* 379 * You must create a transaction, then hold the objects which you will 380 * (or might) modify as part of this transaction. Then you must assign 381 * the transaction to a transaction group. Once the transaction has 382 * been assigned, you can modify buffers which belong to held objects as 383 * part of this transaction. You can't modify buffers before the 384 * transaction has been assigned; you can't modify buffers which don't 385 * belong to objects which this transaction holds; you can't hold 386 * objects once the transaction has been assigned. You may hold an 387 * object which you are going to free (with dmu_object_free()), but you 388 * don't have to. 389 * 390 * You can abort the transaction before it has been assigned. 391 * 392 * Note that you may hold buffers (with dmu_buf_hold) at any time, 393 * regardless of transaction state. 394 */ 395 396 #define DMU_NEW_OBJECT (-1ULL) 397 #define DMU_OBJECT_END (-1ULL) 398 399 dmu_tx_t *dmu_tx_create(objset_t *os); 400 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 401 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 402 uint64_t len); 403 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, char *name); 404 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 405 void dmu_tx_abort(dmu_tx_t *tx); 406 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 407 void dmu_tx_wait(dmu_tx_t *tx); 408 void dmu_tx_commit(dmu_tx_t *tx); 409 410 /* 411 * Free up the data blocks for a defined range of a file. If size is 412 * zero, the range from offset to end-of-file is freed. 413 */ 414 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 415 uint64_t size, dmu_tx_t *tx); 416 417 /* 418 * Convenience functions. 419 * 420 * Canfail routines will return 0 on success, or an errno if there is a 421 * nonrecoverable I/O error. 422 */ 423 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 424 void *buf); 425 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 426 const void *buf, dmu_tx_t *tx); 427 int dmu_write_uio(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 428 struct uio *uio, dmu_tx_t *tx); 429 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 430 uint64_t size, struct page *pp, dmu_tx_t *tx); 431 432 extern int zfs_prefetch_disable; 433 434 /* 435 * Asynchronously try to read in the data. 436 */ 437 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 438 uint64_t len); 439 440 typedef struct dmu_object_info { 441 /* All sizes are in bytes. */ 442 uint32_t doi_data_block_size; 443 uint32_t doi_metadata_block_size; 444 uint64_t doi_bonus_size; 445 dmu_object_type_t doi_type; 446 dmu_object_type_t doi_bonus_type; 447 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 448 uint8_t doi_checksum; 449 uint8_t doi_compress; 450 uint8_t doi_pad[5]; 451 /* Values below are number of 512-byte blocks. */ 452 uint64_t doi_physical_blks; /* data + metadata */ 453 uint64_t doi_max_block_offset; 454 } dmu_object_info_t; 455 456 typedef struct dmu_object_type_info { 457 dmu_byteswap_func_t *ot_byteswap; 458 boolean_t ot_metadata; 459 char *ot_name; 460 } dmu_object_type_info_t; 461 462 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 463 464 /* 465 * Get information on a DMU object. 466 * 467 * Return 0 on success or ENOENT if object is not allocated. 468 * 469 * If doi is NULL, just indicates whether the object exists. 470 */ 471 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 472 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 473 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 474 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 475 u_longlong_t *nblk512); 476 477 typedef struct dmu_objset_stats { 478 uint64_t dds_num_clones; /* number of clones of this */ 479 uint64_t dds_creation_txg; 480 dmu_objset_type_t dds_type; 481 uint8_t dds_is_snapshot; 482 uint8_t dds_inconsistent; 483 char dds_clone_of[MAXNAMELEN]; 484 } dmu_objset_stats_t; 485 486 /* 487 * Get stats on a dataset. 488 */ 489 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 490 491 /* 492 * Add entries to the nvlist for all the objset's properties. See 493 * zfs_prop_table[] and zfs(1m) for details on the properties. 494 */ 495 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 496 497 /* 498 * Get the space usage statistics for statvfs(). 499 * 500 * refdbytes is the amount of space "referenced" by this objset. 501 * availbytes is the amount of space available to this objset, taking 502 * into account quotas & reservations, assuming that no other objsets 503 * use the space first. These values correspond to the 'referenced' and 504 * 'available' properties, described in the zfs(1m) manpage. 505 * 506 * usedobjs and availobjs are the number of objects currently allocated, 507 * and available. 508 */ 509 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 510 uint64_t *usedobjsp, uint64_t *availobjsp); 511 512 /* 513 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 514 * (Contrast with the ds_guid which is a 64-bit ID that will never 515 * change, so there is a small probability that it will collide.) 516 */ 517 uint64_t dmu_objset_fsid_guid(objset_t *os); 518 519 int dmu_objset_is_snapshot(objset_t *os); 520 521 extern struct spa *dmu_objset_spa(objset_t *os); 522 extern struct zilog *dmu_objset_zil(objset_t *os); 523 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 524 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 525 extern void dmu_objset_name(objset_t *os, char *buf); 526 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 527 extern uint64_t dmu_objset_id(objset_t *os); 528 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 529 uint64_t *id, uint64_t *offp); 530 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 531 uint64_t *idp, uint64_t *offp); 532 533 /* 534 * Return the txg number for the given assigned transaction. 535 */ 536 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 537 538 /* 539 * Synchronous write. 540 * If a parent zio is provided this function initiates a write on the 541 * provided buffer as a child of the parent zio. 542 * In the absense of a parent zio, the write is completed synchronously. 543 * At write completion, blk is filled with the bp of the written block. 544 * Note that while the data covered by this function will be on stable 545 * storage when the write completes this new data does not become a 546 * permanent part of the file until the associated transaction commits. 547 */ 548 typedef void dmu_sync_cb_t(dmu_buf_t *db, void *arg); 549 int dmu_sync(struct zio *zio, dmu_buf_t *db, 550 struct blkptr *bp, uint64_t txg, dmu_sync_cb_t *done, void *arg); 551 552 /* 553 * Find the next hole or data block in file starting at *off 554 * Return found offset in *off. Return ESRCH for end of file. 555 */ 556 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 557 uint64_t *off); 558 559 /* 560 * Initial setup and final teardown. 561 */ 562 extern void dmu_init(void); 563 extern void dmu_fini(void); 564 565 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 566 uint64_t object, uint64_t offset, int len); 567 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 568 dmu_traverse_cb_t cb, void *arg); 569 570 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, struct vnode *vp); 571 int dmu_recvbackup(char *tosnap, struct drr_begin *drrb, uint64_t *sizep, 572 boolean_t force, struct vnode *vp, uint64_t voffset); 573 574 /* CRC64 table */ 575 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 576 extern uint64_t zfs_crc64_table[256]; 577 578 #ifdef __cplusplus 579 } 580 #endif 581 582 #endif /* _SYS_DMU_H */ 583