1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved. 23# 24# include global definitions 25include ../Makefile.master 26 27# 28# List of architectures to build as part of the standard build. 29# 30# Some of these architectures are built in parallel (see i386_PARALLEL and 31# sparc_PARALLEL). This requires building some parts first before parallel build 32# can start. Platform make files know what should be built as a prerequisite for 33# the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell 34# which platform directory to enter to start making prerequisite dependencies. 35# 36sparc_ARCHITECTURES = sun4v sun4u sparc 37 38i386_ARCHITECTURES = i86pc i86xpv intel 39 40# 41# For i386 all architectures can be compiled in parallel. 42# 43# intel/Makefile knows how to build prerequisites needed for parallel build. 44# 45i386_PREREQ = intel 46i386_PARALLEL = $(i386_ARCHITECTURES) 47 48# 49# For sparc all architectures can be compiled in parallel. 50# 51# sun4/Makefile knows how to build prerequisites needed for parallel build. 52# can start. 53# 54sparc_PREREQ = sun4 55sparc_PARALLEL = $(sparc_ARCHITECTURES) 56 57# 58# Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed 59# at the end in case $(MACH)_PARALLEL is empty to prevent everything going in 60# parallel. 61# 62.PARALLEL: $($(MACH)_PARALLEL) DUMMY 63 64# 65# For build prerequisites we use a special target which is constructed by adding 66# '.prereq' suffix to the $(MACH)_PREREQ. 67# 68PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq) 69 70 71def := TARGET= def 72all := TARGET= all 73install := TARGET= install 74install_h := TARGET= install_h 75clean := TARGET= clean 76clobber := TARGET= clobber 77lint := TARGET= lint 78clean.lint := TARGET= clean.lint 79check := TARGET= check 80modlist := TARGET= modlist 81modlist := NO_STATE= -K $$MODSTATE$$$$ 82 83.KEEP_STATE: 84 85def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 86 87install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 88 89install_dirs: 90 @cd ..; pwd; $(MAKE) rootdirs 91 @pwd 92 93# 94# Rule to build prerequisites. The left part of the pattern will match 95# PREREQ_TARGET. 96# 97# The location of the Makefile is determined by strippinng '.prereq' suffix from 98# the target name. We add '.prereq' suffix to the target passed to the child 99# Makefile so that it can distinguish prerequisite build from the regular one. 100# 101# 102%.prereq: 103 @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq 104 105# 106# Rule to build architecture files. Build all required prerequisites and then 107# build the rest (potentially in parallel). 108# 109$($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC 110 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 111 112$(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE) 113 @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \ 114 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \ 115 'in environment' >&2 ; \ 116 exit 1 ; \ 117 fi 118 RELEASE="$(RELEASE)" MACH="$(MACH)" \ 119 $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE) 120 121# 122# The following is the list of directories which contain Makefiles with 123# targets to install header file. The machine independent headers are 124# installed by invoking the Makefile in the directory containing the 125# header files. Machine and architecture dependent headers are installed 126# by invoking the main makefile for that architecture/machine which, 127# in turn, is responsible for invoking the Makefiles which install headers. 128# It is done this way so as not to assume that all of the header files in 129# the architecture/machine dependent subdirectories are in completely 130# isomorphic locations. 131# 132COMMON_HDRDIRS= common/avs \ 133 common/c2 \ 134 common/des \ 135 common/fs \ 136 common/gssapi \ 137 common/idmap \ 138 common/inet \ 139 common/inet/ipf/netinet \ 140 common/inet/kssl \ 141 common/inet/nca \ 142 common/inet/sockmods/netpacket \ 143 common/io/bpf/net \ 144 common/ipp \ 145 common/net \ 146 common/netinet \ 147 common/nfs \ 148 common/pcmcia/sys \ 149 common/rpc \ 150 common/rpcsvc \ 151 common/sharefs \ 152 common/smb \ 153 common/smbsrv \ 154 common/sys \ 155 common/vm 156 157 158# These aren't the only headers in closed. But the other directories 159# are simple enough that they can be driven from the src tree. 160$(CLOSED_BUILD)COMMON_HDRDIRS += $(CLOSED)/uts/common/sys 161 162# 163# Subset of COMMON_HDRDIRS in which at least one header is generated 164# at runtime (e.g., rpcgen). (This is a partial list; there are 165# other directories that should be included and do not yet have the 166# necessary Makefile support. See 6414855.) 167# 168DYNHDRDIRS = common/rpcsvc common/idmap common/sys 169 170sparc_HDRDIRS= sun/sys 171i386_HDRDIRS= i86pc/vm i86xpv/vm 172 173HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS) 174install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES) 175 176$(HDRDIRS): FRC 177 @cd $@; pwd; $(MAKE) $(TARGET) 178 179# ensures that headers made by rpcgen and others are available in uts source 180# for kernel builds to reference without building install_h 181# 182all_h: FRC 183 @cd common/sys; pwd; $(MAKE) $@ 184 @cd common/rpc; pwd; $(MAKE) $@ 185 @cd common/rpcsvc; pwd; $(MAKE) $@ 186 @cd common/gssapi; pwd; $(MAKE) $@ 187 @cd common/idmap; pwd; $(MAKE) $@ 188 189clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS) 190 @if [ '$(PATCH_BUILD)' != '#' ] ; then \ 191 echo $(RM) $(PMTMO_FILE) ; \ 192 $(RM) $(PMTMO_FILE) ; \ 193 fi 194 195EXTRA_CLOBBER_TARGETS= common/avs/ns/rdc 196clobber: $(EXTRA_CLOBBER_TARGETS) 197 198 199clean.lint modlist: $($(MACH)_ARCHITECTURES) 200 201ONC_FILES= common/io/timod.c \ 202 common/os/sig.c \ 203 common/os/flock.c \ 204 common/os/sysent.c \ 205 common/os/swapgeneric.c \ 206 common/syscall/fcntl.c 207 208# edit onc plus source files. 209ONC_PLUS: $(ONC_FILES:%=%_onc_plus) 210 211# 212# Cross-reference customization: build a cross-reference over all of 213# the supported architectures. Although there's no correct way to set 214# the include path (since we don't know what architecture is the one 215# the user will be interested in), it's historically been set to 216# mirror the $(XRDIRS) list, and that works kinda sorta okay. 217# 218# We need to manually prune usr/closed/uts/{i86xpv|sfmmu|i86pc} since 219# none of them exist. 220# 221SHARED_XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu \ 222 sun common 223CLOSED_XRDIRS = $(SHARED_XRDIRS:%=% ../../closed/uts/%) 224XRDIRS = $(SHARED_XRDIRS) 225CLOSED_XRDIRS_XEN = $(CLOSED_XRDIRS:../../closed/uts/i86xpv=) 226CLOSED_XRDIRS_1 = $(CLOSED_XRDIRS_XEN:../../closed/uts/i86pc=) 227$(CLOSED_BUILD)XRDIRS = $(CLOSED_XRDIRS_1:../../closed/uts/sfmmu=) 228 229XRINCDIRS = $(XRDIRS) 230 231cscope.out tags: FRC 232 $(XREF) -x $@ 233 234FRC: 235