tsalarm@0:ctl

The tsalarm driver is a Multi-threaded, loadable non-STREAMS pseudo driver that manages ALOM alarms. The tsalarm driver provides an interface through which alarm relays can be controlled on SUNW,Netra-240 and SUNW,Netra-440 platforms.

The alarm hardware differs depending on platform. The Netra 240 and 440 platforms features four dry contact alarm relays which are controlled by ALOM. You can set each alarm to "on" or "off" by using ioctl interfaces provided from the host. The four alarms are labeled as "critical," "major," "minor," and "user." The user alarm is set by a user application depending on system condition. LED's in front of the box provide a visual indication of the four alarms. The number of alarms and their meanings/labels may vary across platforms.

The interface provided by the tsalarm driver comprises ioctls that enable applications to manipulate the alarm module. The alarm module is accessed via two device nodes: i) /dev/lom and /dev/tsalarm:ctl.

The following ioctls are supported by the /dev/lom and /dev/tsalarm:ctl devices: TSIOCALCTL - Turn an alarm on or off.

Alarm values:

The following old style values are defined in <lom.io.h>

 #define ALARM_NUM_0 0 /* number of zero'th alarm */

 #define ALARM_NUM_1 1 /* number of first alarm */

 #define ALARM_NUM_2 2 /* number of second alarm */

 #define ALARM_NUM_3 3 /* number of third alarm */

 Alarm values defined in <lom.io.h>

 #define ALARM_OFF 0 /* Turn off alarm */

 #define ALARM_ON 1 /* Turn on alarm */

Alarm Data Structure:

This structure is defined in <lom.io.h>

 typedef struct {

 int alarm_no; /* alarm to apply command to */

 int alarm_state; /* state of alarm (0 == off) */

 } ts_aldata_t;

Use the following LOM interfaces to get and set the alarms. These definitions are included in <lom_io.h>

 #define ALARM_CRITICAL 0 /* number of critical alarm */

 #define ALARM_MAJOR 1 /* number of major alarm */

 #define ALARM_MINOR 2 /* number of minor alarm */

 #define ALARM_USER 3 /* number of user alarm */

The following alarm data structure is provided in <lom_io.h>:

typedef struct {

 int alarm_no;

 int state;

 } lom_aldata_t;

An open() will fail if: ENXIO

An ioctl() will fail if: EFAULT

How to set an alarm:

 #include <sys/unistd.h>
 #include <fcntl.h>
 #include <stdio.h>
 #include <lom_io.h>

 #define LOM_DEVICE "/dev/lom"

 int
 main()
 {
 lom_aldata_t lld;
 int fd = open(LOM_DEVICE, O_RDWR);

 if (fd == -1) {
 printf("Error opening device: %s\en", LOM_DEVICE);
 exit (1);
 }

 lld.alarm_no = ALARM_CRITICAL; /* Set the critical alarm */
 lld.state = ALARM_ON; /* Set the alarm */

 if (ioctl(fd, LOMIOCALCTL, (char *)&lld) != 0)
 printf("Setting alarm failed");
 else
 printf("Alarm set successfully");

 close(fd);

 }

See attributes(5) for descriptions of the following attributes:

attributes(5)

Writing Device Drivers