xref: /titanic_50/usr/src/cmd/zfs/zfs_main.c (revision df4628cb18cef0a7960608d573d5a9b6cc9e29d5)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 #include <assert.h>
30 #include <ctype.h>
31 #include <errno.h>
32 #include <libgen.h>
33 #include <libintl.h>
34 #include <libuutil.h>
35 #include <libnvpair.h>
36 #include <locale.h>
37 #include <stddef.h>
38 #include <stdio.h>
39 #include <stdlib.h>
40 #include <strings.h>
41 #include <unistd.h>
42 #include <fcntl.h>
43 #include <zone.h>
44 #include <sys/mkdev.h>
45 #include <sys/mntent.h>
46 #include <sys/mnttab.h>
47 #include <sys/mount.h>
48 #include <sys/stat.h>
49 #include <sys/avl.h>
50 
51 #include <libzfs.h>
52 #include <libuutil.h>
53 
54 #include "zfs_iter.h"
55 #include "zfs_util.h"
56 
57 libzfs_handle_t *g_zfs;
58 
59 static FILE *mnttab_file;
60 static int first_argc;
61 static char **first_argv;
62 
63 static int zfs_do_clone(int argc, char **argv);
64 static int zfs_do_create(int argc, char **argv);
65 static int zfs_do_destroy(int argc, char **argv);
66 static int zfs_do_get(int argc, char **argv);
67 static int zfs_do_inherit(int argc, char **argv);
68 static int zfs_do_list(int argc, char **argv);
69 static int zfs_do_mount(int argc, char **argv);
70 static int zfs_do_rename(int argc, char **argv);
71 static int zfs_do_rollback(int argc, char **argv);
72 static int zfs_do_set(int argc, char **argv);
73 static int zfs_do_upgrade(int argc, char **argv);
74 static int zfs_do_snapshot(int argc, char **argv);
75 static int zfs_do_unmount(int argc, char **argv);
76 static int zfs_do_share(int argc, char **argv);
77 static int zfs_do_unshare(int argc, char **argv);
78 static int zfs_do_send(int argc, char **argv);
79 static int zfs_do_receive(int argc, char **argv);
80 static int zfs_do_promote(int argc, char **argv);
81 static int zfs_do_allow(int argc, char **argv);
82 static int zfs_do_unallow(int argc, char **argv);
83 
84 /*
85  * These libumem hooks provide a reasonable set of defaults for the allocator's
86  * debugging facilities.
87  */
88 const char *
89 _umem_debug_init(void)
90 {
91 	return ("default,verbose"); /* $UMEM_DEBUG setting */
92 }
93 
94 const char *
95 _umem_logging_init(void)
96 {
97 	return ("fail,contents"); /* $UMEM_LOGGING setting */
98 }
99 
100 typedef enum {
101 	HELP_CLONE,
102 	HELP_CREATE,
103 	HELP_DESTROY,
104 	HELP_GET,
105 	HELP_INHERIT,
106 	HELP_UPGRADE,
107 	HELP_LIST,
108 	HELP_MOUNT,
109 	HELP_PROMOTE,
110 	HELP_RECEIVE,
111 	HELP_RENAME,
112 	HELP_ROLLBACK,
113 	HELP_SEND,
114 	HELP_SET,
115 	HELP_SHARE,
116 	HELP_SNAPSHOT,
117 	HELP_UNMOUNT,
118 	HELP_UNSHARE,
119 	HELP_ALLOW,
120 	HELP_UNALLOW
121 } zfs_help_t;
122 
123 typedef struct zfs_command {
124 	const char	*name;
125 	int		(*func)(int argc, char **argv);
126 	zfs_help_t	usage;
127 } zfs_command_t;
128 
129 /*
130  * Master command table.  Each ZFS command has a name, associated function, and
131  * usage message.  The usage messages need to be internationalized, so we have
132  * to have a function to return the usage message based on a command index.
133  *
134  * These commands are organized according to how they are displayed in the usage
135  * message.  An empty command (one with a NULL name) indicates an empty line in
136  * the generic usage message.
137  */
138 static zfs_command_t command_table[] = {
139 	{ "create",	zfs_do_create,		HELP_CREATE		},
140 	{ "destroy",	zfs_do_destroy,		HELP_DESTROY		},
141 	{ NULL },
142 	{ "snapshot",	zfs_do_snapshot,	HELP_SNAPSHOT		},
143 	{ "rollback",	zfs_do_rollback,	HELP_ROLLBACK		},
144 	{ "clone",	zfs_do_clone,		HELP_CLONE		},
145 	{ "promote",	zfs_do_promote,		HELP_PROMOTE		},
146 	{ "rename",	zfs_do_rename,		HELP_RENAME		},
147 	{ NULL },
148 	{ "list",	zfs_do_list,		HELP_LIST		},
149 	{ NULL },
150 	{ "set",	zfs_do_set,		HELP_SET		},
151 	{ "get", 	zfs_do_get,		HELP_GET		},
152 	{ "inherit",	zfs_do_inherit,		HELP_INHERIT		},
153 	{ "upgrade",	zfs_do_upgrade,		HELP_UPGRADE		},
154 	{ NULL },
155 	{ "mount",	zfs_do_mount,		HELP_MOUNT		},
156 	{ "unmount",	zfs_do_unmount,		HELP_UNMOUNT		},
157 	{ "share",	zfs_do_share,		HELP_SHARE		},
158 	{ "unshare",	zfs_do_unshare,		HELP_UNSHARE		},
159 	{ NULL },
160 	{ "send",	zfs_do_send,		HELP_SEND		},
161 	{ "receive",	zfs_do_receive,		HELP_RECEIVE		},
162 	{ NULL },
163 	{ "allow",	zfs_do_allow,		HELP_ALLOW		},
164 	{ NULL },
165 	{ "unallow",	zfs_do_unallow,		HELP_UNALLOW		},
166 };
167 
168 #define	NCOMMAND	(sizeof (command_table) / sizeof (command_table[0]))
169 
170 zfs_command_t *current_command;
171 
172 static const char *
173 get_usage(zfs_help_t idx)
174 {
175 	switch (idx) {
176 	case HELP_CLONE:
177 		return (gettext("\tclone [-p] <snapshot> "
178 		    "<filesystem|volume>\n"));
179 	case HELP_CREATE:
180 		return (gettext("\tcreate [-p] [-o property=value] ... "
181 		    "<filesystem>\n"
182 		    "\tcreate [-ps] [-b blocksize] [-o property=value] ... "
183 		    "-V <size> <volume>\n"));
184 	case HELP_DESTROY:
185 		return (gettext("\tdestroy [-rRf] "
186 		    "<filesystem|volume|snapshot>\n"));
187 	case HELP_GET:
188 		return (gettext("\tget [-rHp] [-o field[,...]] "
189 		    "[-s source[,...]]\n"
190 		    "\t    <\"all\" | property[,...]> "
191 		    "[filesystem|volume|snapshot] ...\n"));
192 	case HELP_INHERIT:
193 		return (gettext("\tinherit [-r] <property> "
194 		    "<filesystem|volume> ...\n"));
195 	case HELP_UPGRADE:
196 		return (gettext("\tupgrade [-v]\n"
197 		    "\tupgrade [-r] [-V version] <-a | filesystem ...>\n"));
198 	case HELP_LIST:
199 		return (gettext("\tlist [-rH] [-o property[,...]] "
200 		    "[-t type[,...]] [-s property] ...\n"
201 		    "\t    [-S property] ... "
202 		    "[filesystem|volume|snapshot] ...\n"));
203 	case HELP_MOUNT:
204 		return (gettext("\tmount\n"
205 		    "\tmount [-vO] [-o opts] <-a | filesystem>\n"));
206 	case HELP_PROMOTE:
207 		return (gettext("\tpromote <clone-filesystem>\n"));
208 	case HELP_RECEIVE:
209 		return (gettext("\treceive [-vnF] <filesystem|volume|"
210 		"snapshot>\n"
211 		"\treceive [-vnF] -d <filesystem>\n"));
212 	case HELP_RENAME:
213 		return (gettext("\trename <filesystem|volume|snapshot> "
214 		    "<filesystem|volume|snapshot>\n"
215 		    "\trename -p <filesystem|volume> <filesystem|volume>\n"
216 		    "\trename -r <snapshot> <snapshot>"));
217 	case HELP_ROLLBACK:
218 		return (gettext("\trollback [-rRf] <snapshot>\n"));
219 	case HELP_SEND:
220 		return (gettext("\tsend [-i snapshot] <snapshot>\n"));
221 	case HELP_SET:
222 		return (gettext("\tset <property=value> "
223 		    "<filesystem|volume> ...\n"));
224 	case HELP_SHARE:
225 		return (gettext("\tshare <-a | filesystem>\n"));
226 	case HELP_SNAPSHOT:
227 		return (gettext("\tsnapshot [-r] "
228 		    "<filesystem@snapname|volume@snapname>\n"));
229 	case HELP_UNMOUNT:
230 		return (gettext("\tunmount [-f] "
231 		    "<-a | filesystem|mountpoint>\n"));
232 	case HELP_UNSHARE:
233 		return (gettext("\tunshare [-f] "
234 		    "<-a | filesystem|mountpoint>\n"));
235 	case HELP_ALLOW:
236 		return (gettext("\tallow [-ldug] "
237 		    "<\"everyone\"|user|group>[,...] <perm|@setname>[,...]\n"
238 		    "\t    <filesystem|volume>\n"
239 		    "\tallow [-ld] -e <perm|@setname>[,...] "
240 		    "<filesystem|volume>\n"
241 		    "\tallow -c <perm|@setname>[,...] <filesystem|volume>\n"
242 		    "\tallow -s @setname <perm|@setname>[,...] "
243 		    "<filesystem|volume>\n"));
244 	case HELP_UNALLOW:
245 		return (gettext("\tunallow [-rldug] "
246 		    "<\"everyone\"|user|group>[,...]\n"
247 		    "\t    [<perm|@setname>[,...]] <filesystem|volume>\n"
248 		    "\tunallow [-rld] -e [<perm|@setname>[,...]] "
249 		    "<filesystem|volume>\n"
250 		    "\tunallow [-r] -c [<perm|@setname>[,...]] "
251 		    "<filesystem|volume>\n"
252 		    "\tunallow [-r] -s @setname [<perm|@setname>[,...]] "
253 		    "<filesystem|volume>\n"));
254 	}
255 
256 	abort();
257 	/* NOTREACHED */
258 }
259 
260 /*
261  * Utility function to guarantee malloc() success.
262  */
263 void *
264 safe_malloc(size_t size)
265 {
266 	void *data;
267 
268 	if ((data = calloc(1, size)) == NULL) {
269 		(void) fprintf(stderr, "internal error: out of memory\n");
270 		exit(1);
271 	}
272 
273 	return (data);
274 }
275 
276 /*
277  * Callback routinue that will print out information for each of the
278  * the properties.
279  */
280 static zfs_prop_t
281 usage_prop_cb(zfs_prop_t prop, void *cb)
282 {
283 	FILE *fp = cb;
284 
285 	(void) fprintf(fp, "\t%-13s  ", zfs_prop_to_name(prop));
286 
287 	if (zfs_prop_readonly(prop))
288 		(void) fprintf(fp, "  NO    ");
289 	else
290 		(void) fprintf(fp, " YES    ");
291 
292 	if (zfs_prop_inheritable(prop))
293 		(void) fprintf(fp, "  YES   ");
294 	else
295 		(void) fprintf(fp, "   NO   ");
296 
297 	if (zfs_prop_values(prop) == NULL)
298 		(void) fprintf(fp, "-\n");
299 	else
300 		(void) fprintf(fp, "%s\n", zfs_prop_values(prop));
301 
302 	return (ZFS_PROP_CONT);
303 }
304 
305 /*
306  * Display usage message.  If we're inside a command, display only the usage for
307  * that command.  Otherwise, iterate over the entire command table and display
308  * a complete usage message.
309  */
310 static void
311 usage(boolean_t requested)
312 {
313 	int i;
314 	boolean_t show_properties = B_FALSE;
315 	FILE *fp = requested ? stdout : stderr;
316 
317 	if (current_command == NULL) {
318 
319 		(void) fprintf(fp, gettext("usage: zfs command args ...\n"));
320 		(void) fprintf(fp,
321 		    gettext("where 'command' is one of the following:\n\n"));
322 
323 		for (i = 0; i < NCOMMAND; i++) {
324 			if (command_table[i].name == NULL)
325 				(void) fprintf(fp, "\n");
326 			else
327 				(void) fprintf(fp, "%s",
328 				    get_usage(command_table[i].usage));
329 		}
330 
331 		(void) fprintf(fp, gettext("\nEach dataset is of the form: "
332 		    "pool/[dataset/]*dataset[@name]\n"));
333 	} else {
334 		(void) fprintf(fp, gettext("usage:\n"));
335 		(void) fprintf(fp, "%s", get_usage(current_command->usage));
336 	}
337 
338 	if (current_command != NULL &&
339 	    (strcmp(current_command->name, "set") == 0 ||
340 	    strcmp(current_command->name, "get") == 0 ||
341 	    strcmp(current_command->name, "inherit") == 0 ||
342 	    strcmp(current_command->name, "list") == 0))
343 		show_properties = B_TRUE;
344 
345 	if (show_properties) {
346 
347 		(void) fprintf(fp,
348 		    gettext("\nThe following properties are supported:\n"));
349 
350 		(void) fprintf(fp, "\n\t%-13s  %s  %s   %s\n\n",
351 		    "PROPERTY", "EDIT", "INHERIT", "VALUES");
352 
353 		/* Iterate over all properties */
354 		(void) zfs_prop_iter_ordered(usage_prop_cb, fp);
355 
356 		(void) fprintf(fp, gettext("\nSizes are specified in bytes "
357 		    "with standard units such as K, M, G, etc.\n"));
358 		(void) fprintf(fp, gettext("\n\nUser-defined properties can "
359 		    "be specified by using a name containing a colon (:).\n"));
360 	} else {
361 		/*
362 		 * TRANSLATION NOTE:
363 		 * "zfs set|get" must not be localised this is the
364 		 * command name and arguments.
365 		 */
366 		(void) fprintf(fp,
367 		    gettext("\nFor the property list, run: zfs set|get\n"));
368 	}
369 
370 	/*
371 	 * See comments at end of main().
372 	 */
373 	if (getenv("ZFS_ABORT") != NULL) {
374 		(void) printf("dumping core by request\n");
375 		abort();
376 	}
377 
378 	exit(requested ? 0 : 2);
379 }
380 
381 /*
382  * zfs clone [-p] <snap> <fs | vol>
383  *
384  * Given an existing dataset, create a writable copy whose initial contents
385  * are the same as the source.  The newly created dataset maintains a
386  * dependency on the original; the original cannot be destroyed so long as
387  * the clone exists.
388  *
389  * The '-p' flag creates all the non-existing ancestors of the target first.
390  */
391 static int
392 zfs_do_clone(int argc, char **argv)
393 {
394 	zfs_handle_t *zhp;
395 	boolean_t parents = B_FALSE;
396 	int ret;
397 	int c;
398 
399 	/* check options */
400 	while ((c = getopt(argc, argv, "p")) != -1) {
401 		switch (c) {
402 		case 'p':
403 			parents = B_TRUE;
404 			break;
405 		case '?':
406 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
407 			    optopt);
408 			usage(B_FALSE);
409 		}
410 	}
411 
412 	argc -= optind;
413 	argv += optind;
414 
415 	/* check number of arguments */
416 	if (argc < 1) {
417 		(void) fprintf(stderr, gettext("missing source dataset "
418 		    "argument\n"));
419 		usage(B_FALSE);
420 	}
421 	if (argc < 2) {
422 		(void) fprintf(stderr, gettext("missing target dataset "
423 		    "argument\n"));
424 		usage(B_FALSE);
425 	}
426 	if (argc > 2) {
427 		(void) fprintf(stderr, gettext("too many arguments\n"));
428 		usage(B_FALSE);
429 	}
430 
431 	/* open the source dataset */
432 	if ((zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_SNAPSHOT)) == NULL)
433 		return (1);
434 
435 	if (parents && zfs_name_valid(argv[1], ZFS_TYPE_FILESYSTEM |
436 	    ZFS_TYPE_VOLUME)) {
437 		/*
438 		 * Now create the ancestors of the target dataset.  If the
439 		 * target already exists and '-p' option was used we should not
440 		 * complain.
441 		 */
442 		if (zfs_dataset_exists(g_zfs, argv[1], ZFS_TYPE_FILESYSTEM |
443 		    ZFS_TYPE_VOLUME))
444 			return (0);
445 		if (zfs_create_ancestors(g_zfs, argv[1]) != 0)
446 			return (1);
447 	}
448 
449 	/* pass to libzfs */
450 	ret = zfs_clone(zhp, argv[1], NULL);
451 
452 	/* create the mountpoint if necessary */
453 	if (ret == 0) {
454 		zfs_handle_t *clone = zfs_open(g_zfs, argv[1], ZFS_TYPE_ANY);
455 		if (clone != NULL) {
456 			if ((ret = zfs_mount(clone, NULL, 0)) == 0)
457 				ret = zfs_share(clone);
458 			zfs_close(clone);
459 		}
460 	}
461 
462 	zfs_close(zhp);
463 
464 	return (ret == 0 ? 0 : 1);
465 }
466 
467 /*
468  * zfs create [-p] [-o prop=value] ... fs
469  * zfs create [-ps] [-b blocksize] [-o prop=value] ... -V vol size
470  *
471  * Create a new dataset.  This command can be used to create filesystems
472  * and volumes.  Snapshot creation is handled by 'zfs snapshot'.
473  * For volumes, the user must specify a size to be used.
474  *
475  * The '-s' flag applies only to volumes, and indicates that we should not try
476  * to set the reservation for this volume.  By default we set a reservation
477  * equal to the size for any volume.
478  *
479  * The '-p' flag creates all the non-existing ancestors of the target first.
480  */
481 static int
482 zfs_do_create(int argc, char **argv)
483 {
484 	zfs_type_t type = ZFS_TYPE_FILESYSTEM;
485 	zfs_handle_t *zhp = NULL;
486 	uint64_t volsize;
487 	int c;
488 	boolean_t noreserve = B_FALSE;
489 	boolean_t parents = B_FALSE;
490 	int ret = 1;
491 	nvlist_t *props = NULL;
492 	uint64_t intval;
493 	char *propname;
494 	char *propval = NULL;
495 	char *strval;
496 
497 	if (nvlist_alloc(&props, NV_UNIQUE_NAME, 0) != 0) {
498 		(void) fprintf(stderr, gettext("internal error: "
499 		    "out of memory\n"));
500 		return (1);
501 	}
502 
503 	/* check options */
504 	while ((c = getopt(argc, argv, ":V:b:so:p")) != -1) {
505 		switch (c) {
506 		case 'V':
507 			type = ZFS_TYPE_VOLUME;
508 			if (zfs_nicestrtonum(g_zfs, optarg, &intval) != 0) {
509 				(void) fprintf(stderr, gettext("bad volume "
510 				    "size '%s': %s\n"), optarg,
511 				    libzfs_error_description(g_zfs));
512 				goto error;
513 			}
514 
515 			if (nvlist_add_uint64(props,
516 			    zfs_prop_to_name(ZFS_PROP_VOLSIZE),
517 			    intval) != 0) {
518 				(void) fprintf(stderr, gettext("internal "
519 				    "error: out of memory\n"));
520 				goto error;
521 			}
522 			volsize = intval;
523 			break;
524 		case 'p':
525 			parents = B_TRUE;
526 			break;
527 		case 'b':
528 			if (zfs_nicestrtonum(g_zfs, optarg, &intval) != 0) {
529 				(void) fprintf(stderr, gettext("bad volume "
530 				    "block size '%s': %s\n"), optarg,
531 				    libzfs_error_description(g_zfs));
532 				goto error;
533 			}
534 
535 			if (nvlist_add_uint64(props,
536 			    zfs_prop_to_name(ZFS_PROP_VOLBLOCKSIZE),
537 			    intval) != 0) {
538 				(void) fprintf(stderr, gettext("internal "
539 				    "error: out of memory\n"));
540 				goto error;
541 			}
542 			break;
543 		case 'o':
544 			propname = optarg;
545 			if ((propval = strchr(propname, '=')) == NULL) {
546 				(void) fprintf(stderr, gettext("missing "
547 				    "'=' for -o option\n"));
548 				goto error;
549 			}
550 			*propval = '\0';
551 			propval++;
552 			if (nvlist_lookup_string(props, propname,
553 			    &strval) == 0) {
554 				(void) fprintf(stderr, gettext("property '%s' "
555 				    "specified multiple times\n"), propname);
556 				goto error;
557 			}
558 			if (nvlist_add_string(props, propname, propval) != 0) {
559 				(void) fprintf(stderr, gettext("internal "
560 				    "error: out of memory\n"));
561 				goto error;
562 			}
563 			break;
564 		case 's':
565 			noreserve = B_TRUE;
566 			break;
567 		case ':':
568 			(void) fprintf(stderr, gettext("missing size "
569 			    "argument\n"));
570 			goto badusage;
571 			break;
572 		case '?':
573 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
574 			    optopt);
575 			goto badusage;
576 		}
577 	}
578 
579 	if (noreserve && type != ZFS_TYPE_VOLUME) {
580 		(void) fprintf(stderr, gettext("'-s' can only be used when "
581 		    "creating a volume\n"));
582 		goto badusage;
583 	}
584 
585 	argc -= optind;
586 	argv += optind;
587 
588 	/* check number of arguments */
589 	if (argc == 0) {
590 		(void) fprintf(stderr, gettext("missing %s argument\n"),
591 		    zfs_type_to_name(type));
592 		goto badusage;
593 	}
594 	if (argc > 1) {
595 		(void) fprintf(stderr, gettext("too many arguments\n"));
596 		goto badusage;
597 	}
598 
599 	if (type == ZFS_TYPE_VOLUME && !noreserve &&
600 	    nvlist_lookup_string(props, zfs_prop_to_name(ZFS_PROP_RESERVATION),
601 	    &strval) != 0) {
602 		if (nvlist_add_uint64(props,
603 		    zfs_prop_to_name(ZFS_PROP_RESERVATION),
604 		    volsize) != 0) {
605 			(void) fprintf(stderr, gettext("internal "
606 			    "error: out of memory\n"));
607 			nvlist_free(props);
608 			return (1);
609 		}
610 	}
611 
612 	if (parents && zfs_name_valid(argv[0], type)) {
613 		/*
614 		 * Now create the ancestors of target dataset.  If the target
615 		 * already exists and '-p' option was used we should not
616 		 * complain.
617 		 */
618 		if (zfs_dataset_exists(g_zfs, argv[0], type)) {
619 			ret = 0;
620 			goto error;
621 		}
622 		if (zfs_create_ancestors(g_zfs, argv[0]) != 0)
623 			goto error;
624 	}
625 
626 	/* pass to libzfs */
627 	if (zfs_create(g_zfs, argv[0], type, props) != 0)
628 		goto error;
629 
630 	if ((zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_ANY)) == NULL)
631 		goto error;
632 
633 	/*
634 	 * Mount and/or share the new filesystem as appropriate.  We provide a
635 	 * verbose error message to let the user know that their filesystem was
636 	 * in fact created, even if we failed to mount or share it.
637 	 */
638 	if (zfs_mount(zhp, NULL, 0) != 0) {
639 		(void) fprintf(stderr, gettext("filesystem successfully "
640 		    "created, but not mounted\n"));
641 		ret = 1;
642 	} else if (zfs_share(zhp) != 0) {
643 		(void) fprintf(stderr, gettext("filesystem successfully "
644 		    "created, but not shared\n"));
645 		ret = 1;
646 	} else {
647 		ret = 0;
648 	}
649 
650 error:
651 	if (zhp)
652 		zfs_close(zhp);
653 	nvlist_free(props);
654 	return (ret);
655 badusage:
656 	nvlist_free(props);
657 	usage(B_FALSE);
658 	return (2);
659 }
660 
661 /*
662  * zfs destroy [-rf] <fs, snap, vol>
663  *
664  * 	-r	Recursively destroy all children
665  * 	-R	Recursively destroy all dependents, including clones
666  * 	-f	Force unmounting of any dependents
667  *
668  * Destroys the given dataset.  By default, it will unmount any filesystems,
669  * and refuse to destroy a dataset that has any dependents.  A dependent can
670  * either be a child, or a clone of a child.
671  */
672 typedef struct destroy_cbdata {
673 	boolean_t	cb_first;
674 	int		cb_force;
675 	int		cb_recurse;
676 	int		cb_error;
677 	int		cb_needforce;
678 	int		cb_doclones;
679 	boolean_t	cb_closezhp;
680 	zfs_handle_t	*cb_target;
681 	char		*cb_snapname;
682 } destroy_cbdata_t;
683 
684 /*
685  * Check for any dependents based on the '-r' or '-R' flags.
686  */
687 static int
688 destroy_check_dependent(zfs_handle_t *zhp, void *data)
689 {
690 	destroy_cbdata_t *cbp = data;
691 	const char *tname = zfs_get_name(cbp->cb_target);
692 	const char *name = zfs_get_name(zhp);
693 
694 	if (strncmp(tname, name, strlen(tname)) == 0 &&
695 	    (name[strlen(tname)] == '/' || name[strlen(tname)] == '@')) {
696 		/*
697 		 * This is a direct descendant, not a clone somewhere else in
698 		 * the hierarchy.
699 		 */
700 		if (cbp->cb_recurse)
701 			goto out;
702 
703 		if (cbp->cb_first) {
704 			(void) fprintf(stderr, gettext("cannot destroy '%s': "
705 			    "%s has children\n"),
706 			    zfs_get_name(cbp->cb_target),
707 			    zfs_type_to_name(zfs_get_type(cbp->cb_target)));
708 			(void) fprintf(stderr, gettext("use '-r' to destroy "
709 			    "the following datasets:\n"));
710 			cbp->cb_first = B_FALSE;
711 			cbp->cb_error = 1;
712 		}
713 
714 		(void) fprintf(stderr, "%s\n", zfs_get_name(zhp));
715 	} else {
716 		/*
717 		 * This is a clone.  We only want to report this if the '-r'
718 		 * wasn't specified, or the target is a snapshot.
719 		 */
720 		if (!cbp->cb_recurse &&
721 		    zfs_get_type(cbp->cb_target) != ZFS_TYPE_SNAPSHOT)
722 			goto out;
723 
724 		if (cbp->cb_first) {
725 			(void) fprintf(stderr, gettext("cannot destroy '%s': "
726 			    "%s has dependent clones\n"),
727 			    zfs_get_name(cbp->cb_target),
728 			    zfs_type_to_name(zfs_get_type(cbp->cb_target)));
729 			(void) fprintf(stderr, gettext("use '-R' to destroy "
730 			    "the following datasets:\n"));
731 			cbp->cb_first = B_FALSE;
732 			cbp->cb_error = 1;
733 		}
734 
735 		(void) fprintf(stderr, "%s\n", zfs_get_name(zhp));
736 	}
737 
738 out:
739 	zfs_close(zhp);
740 	return (0);
741 }
742 
743 static int
744 destroy_callback(zfs_handle_t *zhp, void *data)
745 {
746 	destroy_cbdata_t *cbp = data;
747 
748 	/*
749 	 * Ignore pools (which we've already flagged as an error before getting
750 	 * here.
751 	 */
752 	if (strchr(zfs_get_name(zhp), '/') == NULL &&
753 	    zfs_get_type(zhp) == ZFS_TYPE_FILESYSTEM) {
754 		zfs_close(zhp);
755 		return (0);
756 	}
757 
758 	/*
759 	 * Bail out on the first error.
760 	 */
761 	if (zfs_unmount(zhp, NULL, cbp->cb_force ? MS_FORCE : 0) != 0 ||
762 	    zfs_destroy(zhp) != 0) {
763 		zfs_close(zhp);
764 		return (-1);
765 	}
766 
767 	zfs_close(zhp);
768 	return (0);
769 }
770 
771 static int
772 destroy_snap_clones(zfs_handle_t *zhp, void *arg)
773 {
774 	destroy_cbdata_t *cbp = arg;
775 	char thissnap[MAXPATHLEN];
776 	zfs_handle_t *szhp;
777 	boolean_t closezhp = cbp->cb_closezhp;
778 	int rv;
779 
780 	(void) snprintf(thissnap, sizeof (thissnap),
781 	    "%s@%s", zfs_get_name(zhp), cbp->cb_snapname);
782 
783 	libzfs_print_on_error(g_zfs, B_FALSE);
784 	szhp = zfs_open(g_zfs, thissnap, ZFS_TYPE_SNAPSHOT);
785 	libzfs_print_on_error(g_zfs, B_TRUE);
786 	if (szhp) {
787 		/*
788 		 * Destroy any clones of this snapshot
789 		 */
790 		if (zfs_iter_dependents(szhp, B_FALSE, destroy_callback,
791 		    cbp) != 0) {
792 			zfs_close(szhp);
793 			if (closezhp)
794 				zfs_close(zhp);
795 			return (-1);
796 		}
797 		zfs_close(szhp);
798 	}
799 
800 	cbp->cb_closezhp = B_TRUE;
801 	rv = zfs_iter_filesystems(zhp, destroy_snap_clones, arg);
802 	if (closezhp)
803 		zfs_close(zhp);
804 	return (rv);
805 }
806 
807 static int
808 zfs_do_destroy(int argc, char **argv)
809 {
810 	destroy_cbdata_t cb = { 0 };
811 	int c;
812 	zfs_handle_t *zhp;
813 	char *cp;
814 
815 	/* check options */
816 	while ((c = getopt(argc, argv, "frR")) != -1) {
817 		switch (c) {
818 		case 'f':
819 			cb.cb_force = 1;
820 			break;
821 		case 'r':
822 			cb.cb_recurse = 1;
823 			break;
824 		case 'R':
825 			cb.cb_recurse = 1;
826 			cb.cb_doclones = 1;
827 			break;
828 		case '?':
829 		default:
830 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
831 			    optopt);
832 			usage(B_FALSE);
833 		}
834 	}
835 
836 	argc -= optind;
837 	argv += optind;
838 
839 	/* check number of arguments */
840 	if (argc == 0) {
841 		(void) fprintf(stderr, gettext("missing path argument\n"));
842 		usage(B_FALSE);
843 	}
844 	if (argc > 1) {
845 		(void) fprintf(stderr, gettext("too many arguments\n"));
846 		usage(B_FALSE);
847 	}
848 
849 	/*
850 	 * If we are doing recursive destroy of a snapshot, then the
851 	 * named snapshot may not exist.  Go straight to libzfs.
852 	 */
853 	if (cb.cb_recurse && (cp = strchr(argv[0], '@'))) {
854 		int ret;
855 
856 		*cp = '\0';
857 		if ((zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_ANY)) == NULL)
858 			return (1);
859 		*cp = '@';
860 		cp++;
861 
862 		if (cb.cb_doclones) {
863 			cb.cb_snapname = cp;
864 			if (destroy_snap_clones(zhp, &cb) != 0) {
865 				zfs_close(zhp);
866 				return (1);
867 			}
868 		}
869 
870 		ret = zfs_destroy_snaps(zhp, cp);
871 		zfs_close(zhp);
872 		if (ret) {
873 			(void) fprintf(stderr,
874 			    gettext("no snapshots destroyed\n"));
875 		}
876 		return (ret != 0);
877 	}
878 
879 
880 	/* Open the given dataset */
881 	if ((zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_ANY)) == NULL)
882 		return (1);
883 
884 	cb.cb_target = zhp;
885 
886 	/*
887 	 * Perform an explicit check for pools before going any further.
888 	 */
889 	if (!cb.cb_recurse && strchr(zfs_get_name(zhp), '/') == NULL &&
890 	    zfs_get_type(zhp) == ZFS_TYPE_FILESYSTEM) {
891 		(void) fprintf(stderr, gettext("cannot destroy '%s': "
892 		    "operation does not apply to pools\n"),
893 		    zfs_get_name(zhp));
894 		(void) fprintf(stderr, gettext("use 'zfs destroy -r "
895 		    "%s' to destroy all datasets in the pool\n"),
896 		    zfs_get_name(zhp));
897 		(void) fprintf(stderr, gettext("use 'zpool destroy %s' "
898 		    "to destroy the pool itself\n"), zfs_get_name(zhp));
899 		zfs_close(zhp);
900 		return (1);
901 	}
902 
903 	/*
904 	 * Check for any dependents and/or clones.
905 	 */
906 	cb.cb_first = B_TRUE;
907 	if (!cb.cb_doclones &&
908 	    zfs_iter_dependents(zhp, B_TRUE, destroy_check_dependent,
909 	    &cb) != 0) {
910 		zfs_close(zhp);
911 		return (1);
912 	}
913 
914 	if (cb.cb_error ||
915 	    zfs_iter_dependents(zhp, B_FALSE, destroy_callback, &cb) != 0) {
916 		zfs_close(zhp);
917 		return (1);
918 	}
919 
920 	/*
921 	 * Do the real thing.  The callback will close the handle regardless of
922 	 * whether it succeeds or not.
923 	 */
924 
925 	if (destroy_callback(zhp, &cb) != 0)
926 		return (1);
927 
928 
929 	return (0);
930 }
931 
932 /*
933  * zfs get [-rHp] [-o field[,field]...] [-s source[,source]...]
934  * 	< all | property[,property]... > < fs | snap | vol > ...
935  *
936  *	-r	recurse over any child datasets
937  *	-H	scripted mode.  Headers are stripped, and fields are separated
938  *		by tabs instead of spaces.
939  *	-o	Set of fields to display.  One of "name,property,value,source".
940  *		Default is all four.
941  *	-s	Set of sources to allow.  One of
942  *		"local,default,inherited,temporary,none".  Default is all
943  *		five.
944  *	-p	Display values in parsable (literal) format.
945  *
946  *  Prints properties for the given datasets.  The user can control which
947  *  columns to display as well as which property types to allow.
948  */
949 
950 /*
951  * Invoked to display the properties for a single dataset.
952  */
953 static int
954 get_callback(zfs_handle_t *zhp, void *data)
955 {
956 	char buf[ZFS_MAXPROPLEN];
957 	zfs_source_t sourcetype;
958 	char source[ZFS_MAXNAMELEN];
959 	libzfs_get_cbdata_t *cbp = data;
960 	nvlist_t *userprop = zfs_get_user_props(zhp);
961 	zfs_proplist_t *pl = cbp->cb_proplist;
962 	nvlist_t *propval;
963 	char *strval;
964 	char *sourceval;
965 
966 	for (; pl != NULL; pl = pl->pl_next) {
967 		/*
968 		 * Skip the special fake placeholder.  This will also skip over
969 		 * the name property when 'all' is specified.
970 		 */
971 		if (pl->pl_prop == ZFS_PROP_NAME &&
972 		    pl == cbp->cb_proplist)
973 			continue;
974 
975 		if (pl->pl_prop != ZFS_PROP_INVAL) {
976 			if (zfs_prop_get(zhp, pl->pl_prop, buf,
977 			    sizeof (buf), &sourcetype, source,
978 			    sizeof (source),
979 			    cbp->cb_literal) != 0) {
980 				if (pl->pl_all)
981 					continue;
982 				if (!zfs_prop_valid_for_type(pl->pl_prop,
983 				    ZFS_TYPE_ANY)) {
984 					(void) fprintf(stderr,
985 					    gettext("No such property '%s'\n"),
986 					    zfs_prop_to_name(pl->pl_prop));
987 					continue;
988 				}
989 				sourcetype = ZFS_SRC_NONE;
990 				(void) strlcpy(buf, "-", sizeof (buf));
991 			}
992 
993 			libzfs_print_one_property(zfs_get_name(zhp), cbp,
994 			    zfs_prop_to_name(pl->pl_prop),
995 			    buf, sourcetype, source);
996 		} else {
997 			if (nvlist_lookup_nvlist(userprop,
998 			    pl->pl_user_prop, &propval) != 0) {
999 				if (pl->pl_all)
1000 					continue;
1001 				sourcetype = ZFS_SRC_NONE;
1002 				strval = "-";
1003 			} else {
1004 				verify(nvlist_lookup_string(propval,
1005 				    ZFS_PROP_VALUE, &strval) == 0);
1006 				verify(nvlist_lookup_string(propval,
1007 				    ZFS_PROP_SOURCE, &sourceval) == 0);
1008 
1009 				if (strcmp(sourceval,
1010 				    zfs_get_name(zhp)) == 0) {
1011 					sourcetype = ZFS_SRC_LOCAL;
1012 				} else {
1013 					sourcetype = ZFS_SRC_INHERITED;
1014 					(void) strlcpy(source,
1015 					    sourceval, sizeof (source));
1016 				}
1017 			}
1018 
1019 			libzfs_print_one_property(zfs_get_name(zhp), cbp,
1020 			    pl->pl_user_prop, strval, sourcetype,
1021 			    source);
1022 		}
1023 	}
1024 
1025 	return (0);
1026 }
1027 
1028 static int
1029 zfs_do_get(int argc, char **argv)
1030 {
1031 	libzfs_get_cbdata_t cb = { 0 };
1032 	boolean_t recurse = B_FALSE;
1033 	int i, c;
1034 	char *value, *fields;
1035 	int ret;
1036 	zfs_proplist_t fake_name = { 0 };
1037 
1038 	/*
1039 	 * Set up default columns and sources.
1040 	 */
1041 	cb.cb_sources = ZFS_SRC_ALL;
1042 	cb.cb_columns[0] = GET_COL_NAME;
1043 	cb.cb_columns[1] = GET_COL_PROPERTY;
1044 	cb.cb_columns[2] = GET_COL_VALUE;
1045 	cb.cb_columns[3] = GET_COL_SOURCE;
1046 
1047 	/* check options */
1048 	while ((c = getopt(argc, argv, ":o:s:rHp")) != -1) {
1049 		switch (c) {
1050 		case 'p':
1051 			cb.cb_literal = B_TRUE;
1052 			break;
1053 		case 'r':
1054 			recurse = B_TRUE;
1055 			break;
1056 		case 'H':
1057 			cb.cb_scripted = B_TRUE;
1058 			break;
1059 		case ':':
1060 			(void) fprintf(stderr, gettext("missing argument for "
1061 			    "'%c' option\n"), optopt);
1062 			usage(B_FALSE);
1063 			break;
1064 		case 'o':
1065 			/*
1066 			 * Process the set of columns to display.  We zero out
1067 			 * the structure to give us a blank slate.
1068 			 */
1069 			bzero(&cb.cb_columns, sizeof (cb.cb_columns));
1070 			i = 0;
1071 			while (*optarg != '\0') {
1072 				static char *col_subopts[] =
1073 				    { "name", "property", "value", "source",
1074 				    NULL };
1075 
1076 				if (i == 4) {
1077 					(void) fprintf(stderr, gettext("too "
1078 					    "many fields given to -o "
1079 					    "option\n"));
1080 					usage(B_FALSE);
1081 				}
1082 
1083 				switch (getsubopt(&optarg, col_subopts,
1084 				    &value)) {
1085 				case 0:
1086 					cb.cb_columns[i++] = GET_COL_NAME;
1087 					break;
1088 				case 1:
1089 					cb.cb_columns[i++] = GET_COL_PROPERTY;
1090 					break;
1091 				case 2:
1092 					cb.cb_columns[i++] = GET_COL_VALUE;
1093 					break;
1094 				case 3:
1095 					cb.cb_columns[i++] = GET_COL_SOURCE;
1096 					break;
1097 				default:
1098 					(void) fprintf(stderr,
1099 					    gettext("invalid column name "
1100 					    "'%s'\n"), value);
1101 					usage(B_FALSE);
1102 				}
1103 			}
1104 			break;
1105 
1106 		case 's':
1107 			cb.cb_sources = 0;
1108 			while (*optarg != '\0') {
1109 				static char *source_subopts[] = {
1110 					"local", "default", "inherited",
1111 					"temporary", "none", NULL };
1112 
1113 				switch (getsubopt(&optarg, source_subopts,
1114 				    &value)) {
1115 				case 0:
1116 					cb.cb_sources |= ZFS_SRC_LOCAL;
1117 					break;
1118 				case 1:
1119 					cb.cb_sources |= ZFS_SRC_DEFAULT;
1120 					break;
1121 				case 2:
1122 					cb.cb_sources |= ZFS_SRC_INHERITED;
1123 					break;
1124 				case 3:
1125 					cb.cb_sources |= ZFS_SRC_TEMPORARY;
1126 					break;
1127 				case 4:
1128 					cb.cb_sources |= ZFS_SRC_NONE;
1129 					break;
1130 				default:
1131 					(void) fprintf(stderr,
1132 					    gettext("invalid source "
1133 					    "'%s'\n"), value);
1134 					usage(B_FALSE);
1135 				}
1136 			}
1137 			break;
1138 
1139 		case '?':
1140 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1141 			    optopt);
1142 			usage(B_FALSE);
1143 		}
1144 	}
1145 
1146 	argc -= optind;
1147 	argv += optind;
1148 
1149 	if (argc < 1) {
1150 		(void) fprintf(stderr, gettext("missing property "
1151 		    "argument\n"));
1152 		usage(B_FALSE);
1153 	}
1154 
1155 	fields = argv[0];
1156 
1157 	if (zfs_get_proplist(g_zfs, fields, &cb.cb_proplist) != 0)
1158 		usage(B_FALSE);
1159 
1160 	argc--;
1161 	argv++;
1162 
1163 	/*
1164 	 * As part of zfs_expand_proplist(), we keep track of the maximum column
1165 	 * width for each property.  For the 'NAME' (and 'SOURCE') columns, we
1166 	 * need to know the maximum name length.  However, the user likely did
1167 	 * not specify 'name' as one of the properties to fetch, so we need to
1168 	 * make sure we always include at least this property for
1169 	 * print_get_headers() to work properly.
1170 	 */
1171 	if (cb.cb_proplist != NULL) {
1172 		fake_name.pl_prop = ZFS_PROP_NAME;
1173 		fake_name.pl_width = strlen(gettext("NAME"));
1174 		fake_name.pl_next = cb.cb_proplist;
1175 		cb.cb_proplist = &fake_name;
1176 	}
1177 
1178 	cb.cb_first = B_TRUE;
1179 
1180 	/* run for each object */
1181 	ret = zfs_for_each(argc, argv, recurse, ZFS_TYPE_ANY, NULL,
1182 	    &cb.cb_proplist, get_callback, &cb, B_FALSE);
1183 
1184 	if (cb.cb_proplist == &fake_name)
1185 		zfs_free_proplist(fake_name.pl_next);
1186 	else
1187 		zfs_free_proplist(cb.cb_proplist);
1188 
1189 	return (ret);
1190 }
1191 
1192 /*
1193  * inherit [-r] <property> <fs|vol> ...
1194  *
1195  * 	-r	Recurse over all children
1196  *
1197  * For each dataset specified on the command line, inherit the given property
1198  * from its parent.  Inheriting a property at the pool level will cause it to
1199  * use the default value.  The '-r' flag will recurse over all children, and is
1200  * useful for setting a property on a hierarchy-wide basis, regardless of any
1201  * local modifications for each dataset.
1202  */
1203 
1204 static int
1205 inherit_callback(zfs_handle_t *zhp, void *data)
1206 {
1207 	char *propname = data;
1208 	int ret;
1209 
1210 	ret = zfs_prop_inherit(zhp, propname);
1211 	return (ret != 0);
1212 }
1213 
1214 static int
1215 zfs_do_inherit(int argc, char **argv)
1216 {
1217 	boolean_t recurse = B_FALSE;
1218 	int c;
1219 	zfs_prop_t prop;
1220 	char *propname;
1221 	int ret;
1222 
1223 	/* check options */
1224 	while ((c = getopt(argc, argv, "r")) != -1) {
1225 		switch (c) {
1226 		case 'r':
1227 			recurse = B_TRUE;
1228 			break;
1229 		case '?':
1230 		default:
1231 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1232 			    optopt);
1233 			usage(B_FALSE);
1234 		}
1235 	}
1236 
1237 	argc -= optind;
1238 	argv += optind;
1239 
1240 	/* check number of arguments */
1241 	if (argc < 1) {
1242 		(void) fprintf(stderr, gettext("missing property argument\n"));
1243 		usage(B_FALSE);
1244 	}
1245 	if (argc < 2) {
1246 		(void) fprintf(stderr, gettext("missing dataset argument\n"));
1247 		usage(B_FALSE);
1248 	}
1249 
1250 	propname = argv[0];
1251 	argc--;
1252 	argv++;
1253 
1254 	if ((prop = zfs_name_to_prop(propname)) != ZFS_PROP_INVAL) {
1255 		if (zfs_prop_readonly(prop)) {
1256 			(void) fprintf(stderr, gettext(
1257 			    "%s property is read-only\n"),
1258 			    propname);
1259 			return (1);
1260 		}
1261 		if (!zfs_prop_inheritable(prop)) {
1262 			(void) fprintf(stderr, gettext("'%s' property cannot "
1263 			    "be inherited\n"), propname);
1264 			if (prop == ZFS_PROP_QUOTA ||
1265 			    prop == ZFS_PROP_RESERVATION)
1266 				(void) fprintf(stderr, gettext("use 'zfs set "
1267 				    "%s=none' to clear\n"), propname);
1268 			return (1);
1269 		}
1270 	} else if (!zfs_prop_user(propname)) {
1271 		(void) fprintf(stderr, gettext("invalid property '%s'\n"),
1272 		    propname);
1273 		usage(B_FALSE);
1274 	}
1275 
1276 	ret = zfs_for_each(argc, argv, recurse,
1277 	    ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME, NULL, NULL,
1278 	    inherit_callback, propname, B_FALSE);
1279 
1280 	return (ret);
1281 }
1282 
1283 typedef struct upgrade_cbdata {
1284 	uint64_t cb_numupgraded;
1285 	uint64_t cb_numsamegraded;
1286 	uint64_t cb_numfailed;
1287 	uint64_t cb_version;
1288 	boolean_t cb_newer;
1289 	boolean_t cb_foundone;
1290 	char cb_lastfs[ZFS_MAXNAMELEN];
1291 } upgrade_cbdata_t;
1292 
1293 static int
1294 same_pool(zfs_handle_t *zhp, const char *name)
1295 {
1296 	int len1 = strcspn(name, "/@");
1297 	const char *zhname = zfs_get_name(zhp);
1298 	int len2 = strcspn(zhname, "/@");
1299 
1300 	if (len1 != len2)
1301 		return (B_FALSE);
1302 	return (strncmp(name, zhname, len1) != 0);
1303 }
1304 
1305 static int
1306 upgrade_list_callback(zfs_handle_t *zhp, void *data)
1307 {
1308 	upgrade_cbdata_t *cb = data;
1309 	int version = zfs_prop_get_int(zhp, ZFS_PROP_VERSION);
1310 
1311 	/* list if it's old/new */
1312 	if ((!cb->cb_newer && version < ZPL_VERSION) ||
1313 	    (cb->cb_newer && version > SPA_VERSION)) {
1314 		char *str;
1315 		if (cb->cb_newer) {
1316 			str = gettext("The following filesystems are "
1317 			    "formatted using a newer software version and\n"
1318 			    "cannot be accessed on the current system.\n\n");
1319 		} else {
1320 			str = gettext("The following filesystems are "
1321 			    "out of date, and can be upgraded.  After being\n"
1322 			    "upgraded, these filesystems (and any 'zfs send' "
1323 			    "streams generated from\n"
1324 			    "subsequent snapshots) will no longer be "
1325 			    "accessible by older software versions.\n\n");
1326 		}
1327 
1328 		if (!cb->cb_foundone) {
1329 			(void) puts(str);
1330 			(void) printf(gettext("VER  FILESYSTEM\n"));
1331 			(void) printf(gettext("---  ------------\n"));
1332 			cb->cb_foundone = B_TRUE;
1333 		}
1334 
1335 		(void) printf("%2u   %s\n", version, zfs_get_name(zhp));
1336 	}
1337 
1338 	return (0);
1339 }
1340 
1341 static int
1342 upgrade_set_callback(zfs_handle_t *zhp, void *data)
1343 {
1344 	upgrade_cbdata_t *cb = data;
1345 	int version = zfs_prop_get_int(zhp, ZFS_PROP_VERSION);
1346 
1347 	/* upgrade */
1348 	if (version < cb->cb_version) {
1349 		char verstr[16];
1350 		(void) snprintf(verstr, sizeof (verstr),
1351 		    "%llu", cb->cb_version);
1352 		if (cb->cb_lastfs[0] && !same_pool(zhp, cb->cb_lastfs)) {
1353 			/*
1354 			 * If they did "zfs upgrade -a", then we could
1355 			 * be doing ioctls to different pools.  We need
1356 			 * to log this history once to each pool.
1357 			 */
1358 			zpool_stage_history(g_zfs, first_argc, first_argv,
1359 			    B_TRUE);
1360 		}
1361 		if (zfs_prop_set(zhp, "version", verstr) == 0)
1362 			cb->cb_numupgraded++;
1363 		else
1364 			cb->cb_numfailed++;
1365 		(void) strcpy(cb->cb_lastfs, zfs_get_name(zhp));
1366 	} else if (version > cb->cb_version) {
1367 		/* can't downgrade */
1368 		(void) printf(gettext("%s: can not be downgraded; "
1369 		    "it is already at version %u\n"),
1370 		    zfs_get_name(zhp), version);
1371 		cb->cb_numfailed++;
1372 	} else {
1373 		cb->cb_numsamegraded++;
1374 	}
1375 	return (0);
1376 }
1377 
1378 /*
1379  * zfs upgrade
1380  * zfs upgrade -v
1381  * zfs upgrade [-r] [-V <version>] <-a | filesystem>
1382  */
1383 static int
1384 zfs_do_upgrade(int argc, char **argv)
1385 {
1386 	boolean_t recurse = B_FALSE;
1387 	boolean_t all = B_FALSE;
1388 	boolean_t showversions = B_FALSE;
1389 	int ret;
1390 	upgrade_cbdata_t cb = { 0 };
1391 	char c;
1392 
1393 	/* check options */
1394 	while ((c = getopt(argc, argv, "rvV:a")) != -1) {
1395 		switch (c) {
1396 		case 'r':
1397 			recurse = B_TRUE;
1398 			break;
1399 		case 'v':
1400 			showversions = B_TRUE;
1401 			break;
1402 		case 'V':
1403 			if (zfs_prop_string_to_index(ZFS_PROP_VERSION,
1404 			    optarg, &cb.cb_version) != 0) {
1405 				(void) fprintf(stderr,
1406 				    gettext("invalid version %s\n"), optarg);
1407 				usage(B_FALSE);
1408 			}
1409 			break;
1410 		case 'a':
1411 			all = B_TRUE;
1412 			break;
1413 		case '?':
1414 		default:
1415 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1416 			    optopt);
1417 			usage(B_FALSE);
1418 		}
1419 	}
1420 
1421 	argc -= optind;
1422 	argv += optind;
1423 
1424 	if ((!all && !argc) && (recurse | cb.cb_version))
1425 		usage(B_FALSE);
1426 	if (showversions && (recurse || all || cb.cb_version || argc))
1427 		usage(B_FALSE);
1428 	if ((all || argc) && (showversions))
1429 		usage(B_FALSE);
1430 	if (all && argc)
1431 		usage(B_FALSE);
1432 
1433 	if (showversions) {
1434 		/* Show info on available versions. */
1435 		(void) printf(gettext("The following filesystem versions are "
1436 		    "supported:\n\n"));
1437 		(void) printf(gettext("VER  DESCRIPTION\n"));
1438 		(void) printf("---  -----------------------------------------"
1439 		    "---------------\n");
1440 		(void) printf(gettext(" 1   Initial ZFS filesystem version\n"));
1441 		(void) printf(gettext(" 2   Enhanced directory entries\n"));
1442 		(void) printf(gettext("\nFor more information on a particular "
1443 		    "version, including supported releases, see:\n\n"));
1444 		(void) printf("http://www.opensolaris.org/os/community/zfs/"
1445 		    "version/zpl/N\n\n");
1446 		(void) printf(gettext("Where 'N' is the version number.\n"));
1447 		ret = 0;
1448 	} else if (argc || all) {
1449 		/* Upgrade filesystems */
1450 		if (cb.cb_version == 0)
1451 			cb.cb_version = ZPL_VERSION;
1452 		ret = zfs_for_each(argc, argv, recurse, ZFS_TYPE_FILESYSTEM,
1453 		    NULL, NULL, upgrade_set_callback, &cb, B_TRUE);
1454 		(void) printf(gettext("%llu filesystems upgraded\n"),
1455 		    cb.cb_numupgraded);
1456 		if (cb.cb_numsamegraded) {
1457 			(void) printf(gettext("%llu filesystems already at "
1458 			    "this version\n"),
1459 			    cb.cb_numsamegraded);
1460 		}
1461 		if (cb.cb_numfailed != 0)
1462 			ret = 1;
1463 	} else {
1464 		/* List old-version filesytems */
1465 		boolean_t found;
1466 		(void) printf(gettext("This system is currently running "
1467 		    "ZFS filesystem version %llu.\n\n"), ZPL_VERSION);
1468 
1469 		ret = zfs_for_each(0, NULL, B_TRUE, ZFS_TYPE_FILESYSTEM,
1470 		    NULL, NULL, upgrade_list_callback, &cb, B_TRUE);
1471 
1472 		found = cb.cb_foundone;
1473 		cb.cb_foundone = B_FALSE;
1474 		cb.cb_newer = B_TRUE;
1475 
1476 		ret = zfs_for_each(0, NULL, B_TRUE, ZFS_TYPE_FILESYSTEM,
1477 		    NULL, NULL, upgrade_list_callback, &cb, B_TRUE);
1478 
1479 		if (!cb.cb_foundone && !found) {
1480 			(void) printf(gettext("All filesystems are "
1481 			    "formatted with the current version.\n"));
1482 		}
1483 	}
1484 
1485 	return (ret);
1486 }
1487 
1488 /*
1489  * list [-rH] [-o property[,property]...] [-t type[,type]...]
1490  *      [-s property [-s property]...] [-S property [-S property]...]
1491  *      <dataset> ...
1492  *
1493  * 	-r	Recurse over all children
1494  * 	-H	Scripted mode; elide headers and separate colums by tabs
1495  * 	-o	Control which fields to display.
1496  * 	-t	Control which object types to display.
1497  *	-s	Specify sort columns, descending order.
1498  *	-S	Specify sort columns, ascending order.
1499  *
1500  * When given no arguments, lists all filesystems in the system.
1501  * Otherwise, list the specified datasets, optionally recursing down them if
1502  * '-r' is specified.
1503  */
1504 typedef struct list_cbdata {
1505 	boolean_t	cb_first;
1506 	boolean_t	cb_scripted;
1507 	zfs_proplist_t	*cb_proplist;
1508 } list_cbdata_t;
1509 
1510 /*
1511  * Given a list of columns to display, output appropriate headers for each one.
1512  */
1513 static void
1514 print_header(zfs_proplist_t *pl)
1515 {
1516 	char headerbuf[ZFS_MAXPROPLEN];
1517 	const char *header;
1518 	int i;
1519 	boolean_t first = B_TRUE;
1520 	boolean_t right_justify;
1521 
1522 	for (; pl != NULL; pl = pl->pl_next) {
1523 		if (!first) {
1524 			(void) printf("  ");
1525 		} else {
1526 			first = B_FALSE;
1527 		}
1528 
1529 		right_justify = B_FALSE;
1530 		if (pl->pl_prop != ZFS_PROP_INVAL) {
1531 			header = zfs_prop_column_name(pl->pl_prop);
1532 			right_justify = zfs_prop_align_right(pl->pl_prop);
1533 		} else {
1534 			for (i = 0; pl->pl_user_prop[i] != '\0'; i++)
1535 				headerbuf[i] = toupper(pl->pl_user_prop[i]);
1536 			headerbuf[i] = '\0';
1537 			header = headerbuf;
1538 		}
1539 
1540 		if (pl->pl_next == NULL && !right_justify)
1541 			(void) printf("%s", header);
1542 		else if (right_justify)
1543 			(void) printf("%*s", pl->pl_width, header);
1544 		else
1545 			(void) printf("%-*s", pl->pl_width, header);
1546 	}
1547 
1548 	(void) printf("\n");
1549 }
1550 
1551 /*
1552  * Given a dataset and a list of fields, print out all the properties according
1553  * to the described layout.
1554  */
1555 static void
1556 print_dataset(zfs_handle_t *zhp, zfs_proplist_t *pl, int scripted)
1557 {
1558 	boolean_t first = B_TRUE;
1559 	char property[ZFS_MAXPROPLEN];
1560 	nvlist_t *userprops = zfs_get_user_props(zhp);
1561 	nvlist_t *propval;
1562 	char *propstr;
1563 	boolean_t right_justify;
1564 	int width;
1565 
1566 	for (; pl != NULL; pl = pl->pl_next) {
1567 		if (!first) {
1568 			if (scripted)
1569 				(void) printf("\t");
1570 			else
1571 				(void) printf("  ");
1572 		} else {
1573 			first = B_FALSE;
1574 		}
1575 
1576 		right_justify = B_FALSE;
1577 		if (pl->pl_prop != ZFS_PROP_INVAL) {
1578 			if (zfs_prop_get(zhp, pl->pl_prop, property,
1579 			    sizeof (property), NULL, NULL, 0, B_FALSE) != 0)
1580 				propstr = "-";
1581 			else
1582 				propstr = property;
1583 
1584 			right_justify = zfs_prop_align_right(pl->pl_prop);
1585 		} else {
1586 			if (nvlist_lookup_nvlist(userprops,
1587 			    pl->pl_user_prop, &propval) != 0)
1588 				propstr = "-";
1589 			else
1590 				verify(nvlist_lookup_string(propval,
1591 				    ZFS_PROP_VALUE, &propstr) == 0);
1592 		}
1593 
1594 		width = pl->pl_width;
1595 
1596 		/*
1597 		 * If this is being called in scripted mode, or if this is the
1598 		 * last column and it is left-justified, don't include a width
1599 		 * format specifier.
1600 		 */
1601 		if (scripted || (pl->pl_next == NULL && !right_justify))
1602 			(void) printf("%s", propstr);
1603 		else if (right_justify)
1604 			(void) printf("%*s", width, propstr);
1605 		else
1606 			(void) printf("%-*s", width, propstr);
1607 	}
1608 
1609 	(void) printf("\n");
1610 }
1611 
1612 /*
1613  * Generic callback function to list a dataset or snapshot.
1614  */
1615 static int
1616 list_callback(zfs_handle_t *zhp, void *data)
1617 {
1618 	list_cbdata_t *cbp = data;
1619 
1620 	if (cbp->cb_first) {
1621 		if (!cbp->cb_scripted)
1622 			print_header(cbp->cb_proplist);
1623 		cbp->cb_first = B_FALSE;
1624 	}
1625 
1626 	print_dataset(zhp, cbp->cb_proplist, cbp->cb_scripted);
1627 
1628 	return (0);
1629 }
1630 
1631 static int
1632 zfs_do_list(int argc, char **argv)
1633 {
1634 	int c;
1635 	boolean_t recurse = B_FALSE;
1636 	boolean_t scripted = B_FALSE;
1637 	static char default_fields[] =
1638 	    "name,used,available,referenced,mountpoint";
1639 	int types = ZFS_TYPE_ANY;
1640 	char *fields = NULL;
1641 	char *basic_fields = default_fields;
1642 	list_cbdata_t cb = { 0 };
1643 	char *value;
1644 	int ret;
1645 	char *type_subopts[] = { "filesystem", "volume", "snapshot", NULL };
1646 	zfs_sort_column_t *sortcol = NULL;
1647 
1648 	/* check options */
1649 	while ((c = getopt(argc, argv, ":o:rt:Hs:S:")) != -1) {
1650 		switch (c) {
1651 		case 'o':
1652 			fields = optarg;
1653 			break;
1654 		case 'r':
1655 			recurse = B_TRUE;
1656 			break;
1657 		case 'H':
1658 			scripted = B_TRUE;
1659 			break;
1660 		case 's':
1661 			if (zfs_add_sort_column(&sortcol, optarg,
1662 			    B_FALSE) != 0) {
1663 				(void) fprintf(stderr,
1664 				    gettext("invalid property '%s'\n"), optarg);
1665 				usage(B_FALSE);
1666 			}
1667 			break;
1668 		case 'S':
1669 			if (zfs_add_sort_column(&sortcol, optarg,
1670 			    B_TRUE) != 0) {
1671 				(void) fprintf(stderr,
1672 				    gettext("invalid property '%s'\n"), optarg);
1673 				usage(B_FALSE);
1674 			}
1675 			break;
1676 		case 't':
1677 			types = 0;
1678 			while (*optarg != '\0') {
1679 				switch (getsubopt(&optarg, type_subopts,
1680 				    &value)) {
1681 				case 0:
1682 					types |= ZFS_TYPE_FILESYSTEM;
1683 					break;
1684 				case 1:
1685 					types |= ZFS_TYPE_VOLUME;
1686 					break;
1687 				case 2:
1688 					types |= ZFS_TYPE_SNAPSHOT;
1689 					break;
1690 				default:
1691 					(void) fprintf(stderr,
1692 					    gettext("invalid type '%s'\n"),
1693 					    value);
1694 					usage(B_FALSE);
1695 				}
1696 			}
1697 			break;
1698 		case ':':
1699 			(void) fprintf(stderr, gettext("missing argument for "
1700 			    "'%c' option\n"), optopt);
1701 			usage(B_FALSE);
1702 			break;
1703 		case '?':
1704 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1705 			    optopt);
1706 			usage(B_FALSE);
1707 		}
1708 	}
1709 
1710 	argc -= optind;
1711 	argv += optind;
1712 
1713 	if (fields == NULL)
1714 		fields = basic_fields;
1715 
1716 	/*
1717 	 * If the user specifies '-o all', the zfs_get_proplist() doesn't
1718 	 * normally include the name of the dataset.  For 'zfs list', we always
1719 	 * want this property to be first.
1720 	 */
1721 	if (zfs_get_proplist(g_zfs, fields, &cb.cb_proplist) != 0)
1722 		usage(B_FALSE);
1723 
1724 	cb.cb_scripted = scripted;
1725 	cb.cb_first = B_TRUE;
1726 
1727 	ret = zfs_for_each(argc, argv, recurse, types, sortcol, &cb.cb_proplist,
1728 	    list_callback, &cb, B_TRUE);
1729 
1730 	zfs_free_proplist(cb.cb_proplist);
1731 	zfs_free_sort_columns(sortcol);
1732 
1733 	if (ret == 0 && cb.cb_first && !cb.cb_scripted)
1734 		(void) printf(gettext("no datasets available\n"));
1735 
1736 	return (ret);
1737 }
1738 
1739 /*
1740  * zfs rename <fs | snap | vol> <fs | snap | vol>
1741  * zfs rename -p <fs | vol> <fs | vol>
1742  * zfs rename -r <snap> <snap>
1743  *
1744  * Renames the given dataset to another of the same type.
1745  *
1746  * The '-p' flag creates all the non-existing ancestors of the target first.
1747  */
1748 /* ARGSUSED */
1749 static int
1750 zfs_do_rename(int argc, char **argv)
1751 {
1752 	zfs_handle_t *zhp;
1753 	int c;
1754 	int ret;
1755 	boolean_t recurse = B_FALSE;
1756 	boolean_t parents = B_FALSE;
1757 
1758 	/* check options */
1759 	while ((c = getopt(argc, argv, "pr")) != -1) {
1760 		switch (c) {
1761 		case 'p':
1762 			parents = B_TRUE;
1763 			break;
1764 		case 'r':
1765 			recurse = B_TRUE;
1766 			break;
1767 		case '?':
1768 		default:
1769 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1770 			    optopt);
1771 			usage(B_FALSE);
1772 		}
1773 	}
1774 
1775 	argc -= optind;
1776 	argv += optind;
1777 
1778 	/* check number of arguments */
1779 	if (argc < 1) {
1780 		(void) fprintf(stderr, gettext("missing source dataset "
1781 		    "argument\n"));
1782 		usage(B_FALSE);
1783 	}
1784 	if (argc < 2) {
1785 		(void) fprintf(stderr, gettext("missing target dataset "
1786 		    "argument\n"));
1787 		usage(B_FALSE);
1788 	}
1789 	if (argc > 2) {
1790 		(void) fprintf(stderr, gettext("too many arguments\n"));
1791 		usage(B_FALSE);
1792 	}
1793 
1794 	if (recurse && parents) {
1795 		(void) fprintf(stderr, gettext("-p and -r options are mutually "
1796 		    "exclusive\n"));
1797 		usage(B_FALSE);
1798 	}
1799 
1800 	if (recurse && strchr(argv[0], '@') == 0) {
1801 		(void) fprintf(stderr, gettext("source dataset for recursive "
1802 		    "rename must be a snapshot\n"));
1803 		usage(B_FALSE);
1804 	}
1805 
1806 	if ((zhp = zfs_open(g_zfs, argv[0], parents ? ZFS_TYPE_FILESYSTEM |
1807 	    ZFS_TYPE_VOLUME : ZFS_TYPE_ANY)) == NULL)
1808 		return (1);
1809 
1810 	/* If we were asked and the name looks good, try to create ancestors. */
1811 	if (parents && zfs_name_valid(argv[1], zfs_get_type(zhp)) &&
1812 	    zfs_create_ancestors(g_zfs, argv[1]) != 0) {
1813 		zfs_close(zhp);
1814 		return (1);
1815 	}
1816 
1817 	ret = (zfs_rename(zhp, argv[1], recurse) != 0);
1818 
1819 	zfs_close(zhp);
1820 	return (ret);
1821 }
1822 
1823 /*
1824  * zfs promote <fs>
1825  *
1826  * Promotes the given clone fs to be the parent
1827  */
1828 /* ARGSUSED */
1829 static int
1830 zfs_do_promote(int argc, char **argv)
1831 {
1832 	zfs_handle_t *zhp;
1833 	int ret;
1834 
1835 	/* check options */
1836 	if (argc > 1 && argv[1][0] == '-') {
1837 		(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1838 		    argv[1][1]);
1839 		usage(B_FALSE);
1840 	}
1841 
1842 	/* check number of arguments */
1843 	if (argc < 2) {
1844 		(void) fprintf(stderr, gettext("missing clone filesystem"
1845 		    " argument\n"));
1846 		usage(B_FALSE);
1847 	}
1848 	if (argc > 2) {
1849 		(void) fprintf(stderr, gettext("too many arguments\n"));
1850 		usage(B_FALSE);
1851 	}
1852 
1853 	zhp = zfs_open(g_zfs, argv[1], ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME);
1854 	if (zhp == NULL)
1855 		return (1);
1856 
1857 	ret = (zfs_promote(zhp) != 0);
1858 
1859 
1860 	zfs_close(zhp);
1861 	return (ret);
1862 }
1863 
1864 /*
1865  * zfs rollback [-rfR] <snapshot>
1866  *
1867  * 	-r	Delete any intervening snapshots before doing rollback
1868  * 	-R	Delete any snapshots and their clones
1869  * 	-f	Force unmount filesystems, even if they are in use.
1870  *
1871  * Given a filesystem, rollback to a specific snapshot, discarding any changes
1872  * since then and making it the active dataset.  If more recent snapshots exist,
1873  * the command will complain unless the '-r' flag is given.
1874  */
1875 typedef struct rollback_cbdata {
1876 	uint64_t	cb_create;
1877 	boolean_t	cb_first;
1878 	int		cb_doclones;
1879 	char		*cb_target;
1880 	int		cb_error;
1881 	boolean_t	cb_recurse;
1882 	boolean_t	cb_dependent;
1883 } rollback_cbdata_t;
1884 
1885 /*
1886  * Report any snapshots more recent than the one specified.  Used when '-r' is
1887  * not specified.  We reuse this same callback for the snapshot dependents - if
1888  * 'cb_dependent' is set, then this is a dependent and we should report it
1889  * without checking the transaction group.
1890  */
1891 static int
1892 rollback_check(zfs_handle_t *zhp, void *data)
1893 {
1894 	rollback_cbdata_t *cbp = data;
1895 
1896 	if (cbp->cb_doclones) {
1897 		zfs_close(zhp);
1898 		return (0);
1899 	}
1900 
1901 	if (!cbp->cb_dependent) {
1902 		if (strcmp(zfs_get_name(zhp), cbp->cb_target) != 0 &&
1903 		    zfs_get_type(zhp) == ZFS_TYPE_SNAPSHOT &&
1904 		    zfs_prop_get_int(zhp, ZFS_PROP_CREATETXG) >
1905 		    cbp->cb_create) {
1906 
1907 			if (cbp->cb_first && !cbp->cb_recurse) {
1908 				(void) fprintf(stderr, gettext("cannot "
1909 				    "rollback to '%s': more recent snapshots "
1910 				    "exist\n"),
1911 				    cbp->cb_target);
1912 				(void) fprintf(stderr, gettext("use '-r' to "
1913 				    "force deletion of the following "
1914 				    "snapshots:\n"));
1915 				cbp->cb_first = 0;
1916 				cbp->cb_error = 1;
1917 			}
1918 
1919 			if (cbp->cb_recurse) {
1920 				cbp->cb_dependent = B_TRUE;
1921 				if (zfs_iter_dependents(zhp, B_TRUE,
1922 				    rollback_check, cbp) != 0) {
1923 					zfs_close(zhp);
1924 					return (-1);
1925 				}
1926 				cbp->cb_dependent = B_FALSE;
1927 			} else {
1928 				(void) fprintf(stderr, "%s\n",
1929 				    zfs_get_name(zhp));
1930 			}
1931 		}
1932 	} else {
1933 		if (cbp->cb_first && cbp->cb_recurse) {
1934 			(void) fprintf(stderr, gettext("cannot rollback to "
1935 			    "'%s': clones of previous snapshots exist\n"),
1936 			    cbp->cb_target);
1937 			(void) fprintf(stderr, gettext("use '-R' to "
1938 			    "force deletion of the following clones and "
1939 			    "dependents:\n"));
1940 			cbp->cb_first = 0;
1941 			cbp->cb_error = 1;
1942 		}
1943 
1944 		(void) fprintf(stderr, "%s\n", zfs_get_name(zhp));
1945 	}
1946 
1947 	zfs_close(zhp);
1948 	return (0);
1949 }
1950 
1951 static int
1952 zfs_do_rollback(int argc, char **argv)
1953 {
1954 	int ret;
1955 	int c;
1956 	rollback_cbdata_t cb = { 0 };
1957 	zfs_handle_t *zhp, *snap;
1958 	char parentname[ZFS_MAXNAMELEN];
1959 	char *delim;
1960 	int force = 0;
1961 
1962 	/* check options */
1963 	while ((c = getopt(argc, argv, "rfR")) != -1) {
1964 		switch (c) {
1965 		case 'f':
1966 			force = 1;
1967 			break;
1968 		case 'r':
1969 			cb.cb_recurse = 1;
1970 			break;
1971 		case 'R':
1972 			cb.cb_recurse = 1;
1973 			cb.cb_doclones = 1;
1974 			break;
1975 		case '?':
1976 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
1977 			    optopt);
1978 			usage(B_FALSE);
1979 		}
1980 	}
1981 
1982 	argc -= optind;
1983 	argv += optind;
1984 
1985 	/* check number of arguments */
1986 	if (argc < 1) {
1987 		(void) fprintf(stderr, gettext("missing dataset argument\n"));
1988 		usage(B_FALSE);
1989 	}
1990 	if (argc > 1) {
1991 		(void) fprintf(stderr, gettext("too many arguments\n"));
1992 		usage(B_FALSE);
1993 	}
1994 
1995 	/* open the snapshot */
1996 	if ((snap = zfs_open(g_zfs, argv[0], ZFS_TYPE_SNAPSHOT)) == NULL)
1997 		return (1);
1998 
1999 	/* open the parent dataset */
2000 	(void) strlcpy(parentname, argv[0], sizeof (parentname));
2001 	verify((delim = strrchr(parentname, '@')) != NULL);
2002 	*delim = '\0';
2003 	if ((zhp = zfs_open(g_zfs, parentname, ZFS_TYPE_ANY)) == NULL) {
2004 		zfs_close(snap);
2005 		return (1);
2006 	}
2007 
2008 	/*
2009 	 * Check for more recent snapshots and/or clones based on the presence
2010 	 * of '-r' and '-R'.
2011 	 */
2012 	cb.cb_target = argv[0];
2013 	cb.cb_create = zfs_prop_get_int(snap, ZFS_PROP_CREATETXG);
2014 	cb.cb_first = B_TRUE;
2015 	cb.cb_error = 0;
2016 	if ((ret = zfs_iter_children(zhp, rollback_check, &cb)) != 0)
2017 		goto out;
2018 
2019 	if ((ret = cb.cb_error) != 0)
2020 		goto out;
2021 
2022 	/*
2023 	 * Rollback parent to the given snapshot.
2024 	 */
2025 	ret = zfs_rollback(zhp, snap, force);
2026 
2027 out:
2028 	zfs_close(snap);
2029 	zfs_close(zhp);
2030 
2031 	if (ret == 0)
2032 		return (0);
2033 	else
2034 		return (1);
2035 }
2036 
2037 /*
2038  * zfs set property=value { fs | snap | vol } ...
2039  *
2040  * Sets the given property for all datasets specified on the command line.
2041  */
2042 typedef struct set_cbdata {
2043 	char		*cb_propname;
2044 	char		*cb_value;
2045 } set_cbdata_t;
2046 
2047 static int
2048 set_callback(zfs_handle_t *zhp, void *data)
2049 {
2050 	set_cbdata_t *cbp = data;
2051 
2052 	if (zfs_prop_set(zhp, cbp->cb_propname, cbp->cb_value) != 0) {
2053 		switch (libzfs_errno(g_zfs)) {
2054 		case EZFS_MOUNTFAILED:
2055 			(void) fprintf(stderr, gettext("property may be set "
2056 			    "but unable to remount filesystem\n"));
2057 			break;
2058 		case EZFS_SHARENFSFAILED:
2059 			(void) fprintf(stderr, gettext("property may be set "
2060 			    "but unable to reshare filesystem\n"));
2061 			break;
2062 		}
2063 		return (1);
2064 	}
2065 	return (0);
2066 }
2067 
2068 static int
2069 zfs_do_set(int argc, char **argv)
2070 {
2071 	set_cbdata_t cb;
2072 	int ret;
2073 
2074 	/* check for options */
2075 	if (argc > 1 && argv[1][0] == '-') {
2076 		(void) fprintf(stderr, gettext("invalid option '%c'\n"),
2077 		    argv[1][1]);
2078 		usage(B_FALSE);
2079 	}
2080 
2081 	/* check number of arguments */
2082 	if (argc < 2) {
2083 		(void) fprintf(stderr, gettext("missing property=value "
2084 		    "argument\n"));
2085 		usage(B_FALSE);
2086 	}
2087 	if (argc < 3) {
2088 		(void) fprintf(stderr, gettext("missing dataset name\n"));
2089 		usage(B_FALSE);
2090 	}
2091 
2092 	/* validate property=value argument */
2093 	cb.cb_propname = argv[1];
2094 	if ((cb.cb_value = strchr(cb.cb_propname, '=')) == NULL) {
2095 		(void) fprintf(stderr, gettext("missing value in "
2096 		    "property=value argument\n"));
2097 		usage(B_FALSE);
2098 	}
2099 
2100 	*cb.cb_value = '\0';
2101 	cb.cb_value++;
2102 
2103 	if (*cb.cb_propname == '\0') {
2104 		(void) fprintf(stderr,
2105 		    gettext("missing property in property=value argument\n"));
2106 		usage(B_FALSE);
2107 	}
2108 
2109 
2110 	ret = zfs_for_each(argc - 2, argv + 2, B_FALSE,
2111 	    ZFS_TYPE_ANY, NULL, NULL, set_callback, &cb, B_FALSE);
2112 
2113 	return (ret);
2114 }
2115 
2116 /*
2117  * zfs snapshot [-r] <fs@snap>
2118  *
2119  * Creates a snapshot with the given name.  While functionally equivalent to
2120  * 'zfs create', it is a separate command to diffferentiate intent.
2121  */
2122 static int
2123 zfs_do_snapshot(int argc, char **argv)
2124 {
2125 	boolean_t recursive = B_FALSE;
2126 	int ret;
2127 	char c;
2128 
2129 	/* check options */
2130 	while ((c = getopt(argc, argv, ":r")) != -1) {
2131 		switch (c) {
2132 		case 'r':
2133 			recursive = B_TRUE;
2134 			break;
2135 		case '?':
2136 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
2137 			    optopt);
2138 			usage(B_FALSE);
2139 		}
2140 	}
2141 
2142 	argc -= optind;
2143 	argv += optind;
2144 
2145 	/* check number of arguments */
2146 	if (argc < 1) {
2147 		(void) fprintf(stderr, gettext("missing snapshot argument\n"));
2148 		usage(B_FALSE);
2149 	}
2150 	if (argc > 1) {
2151 		(void) fprintf(stderr, gettext("too many arguments\n"));
2152 		usage(B_FALSE);
2153 	}
2154 
2155 	ret = zfs_snapshot(g_zfs, argv[0], recursive);
2156 	if (ret && recursive)
2157 		(void) fprintf(stderr, gettext("no snapshots were created\n"));
2158 	return (ret != 0);
2159 }
2160 
2161 /*
2162  * zfs send [-i <@snap>] <fs@snap>
2163  *
2164  * Send a backup stream to stdout.
2165  */
2166 static int
2167 zfs_do_send(int argc, char **argv)
2168 {
2169 	char *fromname = NULL;
2170 	char *cp;
2171 	zfs_handle_t *zhp;
2172 	int c, err;
2173 
2174 	/* check options */
2175 	while ((c = getopt(argc, argv, ":i:")) != -1) {
2176 		switch (c) {
2177 		case 'i':
2178 			if (fromname)
2179 				usage(B_FALSE);
2180 			fromname = optarg;
2181 			break;
2182 		case ':':
2183 			(void) fprintf(stderr, gettext("missing argument for "
2184 			    "'%c' option\n"), optopt);
2185 			usage(B_FALSE);
2186 			break;
2187 		case '?':
2188 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
2189 			    optopt);
2190 			usage(B_FALSE);
2191 		}
2192 	}
2193 
2194 	argc -= optind;
2195 	argv += optind;
2196 
2197 	/* check number of arguments */
2198 	if (argc < 1) {
2199 		(void) fprintf(stderr, gettext("missing snapshot argument\n"));
2200 		usage(B_FALSE);
2201 	}
2202 	if (argc > 1) {
2203 		(void) fprintf(stderr, gettext("too many arguments\n"));
2204 		usage(B_FALSE);
2205 	}
2206 
2207 	if (isatty(STDOUT_FILENO)) {
2208 		(void) fprintf(stderr,
2209 		    gettext("Error: Stream can not be written to a terminal.\n"
2210 		    "You must redirect standard output.\n"));
2211 		return (1);
2212 	}
2213 
2214 	if ((zhp = zfs_open(g_zfs, argv[0], ZFS_TYPE_SNAPSHOT)) == NULL)
2215 		return (1);
2216 
2217 	/*
2218 	 * If they specified the full path to the snapshot, chop off
2219 	 * everything except the short name of the snapshot.
2220 	 */
2221 	if (fromname && (cp = strchr(fromname, '@')) != NULL) {
2222 		if (cp != fromname &&
2223 		    strncmp(argv[0], fromname, cp - fromname + 1)) {
2224 			(void) fprintf(stderr,
2225 			    gettext("incremental source must be "
2226 			    "in same filesystem\n"));
2227 			usage(B_FALSE);
2228 		}
2229 		fromname = cp + 1;
2230 		if (strchr(fromname, '@') || strchr(fromname, '/')) {
2231 			(void) fprintf(stderr,
2232 			    gettext("invalid incremental source\n"));
2233 			usage(B_FALSE);
2234 		}
2235 	}
2236 
2237 	err = zfs_send(zhp, fromname, STDOUT_FILENO);
2238 	zfs_close(zhp);
2239 
2240 	return (err != 0);
2241 }
2242 
2243 /*
2244  * zfs receive <fs@snap>
2245  *
2246  * Restore a backup stream from stdin.
2247  */
2248 static int
2249 zfs_do_receive(int argc, char **argv)
2250 {
2251 	int c, err;
2252 	boolean_t isprefix = B_FALSE;
2253 	boolean_t dryrun = B_FALSE;
2254 	boolean_t verbose = B_FALSE;
2255 	boolean_t force = B_FALSE;
2256 
2257 	/* check options */
2258 	while ((c = getopt(argc, argv, ":dnvF")) != -1) {
2259 		switch (c) {
2260 		case 'd':
2261 			isprefix = B_TRUE;
2262 			break;
2263 		case 'n':
2264 			dryrun = B_TRUE;
2265 			break;
2266 		case 'v':
2267 			verbose = B_TRUE;
2268 			break;
2269 		case 'F':
2270 			force = B_TRUE;
2271 			break;
2272 		case ':':
2273 			(void) fprintf(stderr, gettext("missing argument for "
2274 			    "'%c' option\n"), optopt);
2275 			usage(B_FALSE);
2276 			break;
2277 		case '?':
2278 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
2279 			    optopt);
2280 			usage(B_FALSE);
2281 		}
2282 	}
2283 
2284 	argc -= optind;
2285 	argv += optind;
2286 
2287 	/* check number of arguments */
2288 	if (argc < 1) {
2289 		(void) fprintf(stderr, gettext("missing snapshot argument\n"));
2290 		usage(B_FALSE);
2291 	}
2292 	if (argc > 1) {
2293 		(void) fprintf(stderr, gettext("too many arguments\n"));
2294 		usage(B_FALSE);
2295 	}
2296 
2297 	if (isatty(STDIN_FILENO)) {
2298 		(void) fprintf(stderr,
2299 		    gettext("Error: Backup stream can not be read "
2300 		    "from a terminal.\n"
2301 		    "You must redirect standard input.\n"));
2302 		return (1);
2303 	}
2304 
2305 	err = zfs_receive(g_zfs, argv[0], isprefix, verbose, dryrun, force,
2306 	    STDIN_FILENO);
2307 
2308 	return (err != 0);
2309 }
2310 
2311 typedef struct allow_cb {
2312 	int  a_permcnt;
2313 	size_t a_treeoffset;
2314 } allow_cb_t;
2315 
2316 static void
2317 zfs_print_perms(avl_tree_t *tree)
2318 {
2319 	zfs_perm_node_t *permnode;
2320 
2321 	permnode = avl_first(tree);
2322 	while (permnode != NULL) {
2323 		(void) printf("%s", permnode->z_pname);
2324 		permnode = AVL_NEXT(tree, permnode);
2325 		if (permnode)
2326 			(void) printf(",");
2327 		else
2328 			(void) printf("\n");
2329 	}
2330 }
2331 
2332 /*
2333  * Iterate over user/groups/everyone/... and the call perm_iter
2334  * function to print actual permission when tree has >0 nodes.
2335  */
2336 static void
2337 zfs_iter_perms(avl_tree_t *tree, const char *banner, allow_cb_t *cb)
2338 {
2339 	zfs_allow_node_t *item;
2340 	avl_tree_t *ptree;
2341 
2342 	item = avl_first(tree);
2343 	while (item) {
2344 		ptree = (void *)((char *)item + cb->a_treeoffset);
2345 		if (avl_numnodes(ptree)) {
2346 			if (cb->a_permcnt++ == 0)
2347 				(void) printf("%s\n", banner);
2348 			(void) printf("\t%s", item->z_key);
2349 			/*
2350 			 * Avoid an extra space being printed
2351 			 * for "everyone" which is keyed with a null
2352 			 * string
2353 			 */
2354 			if (item->z_key[0] != '\0')
2355 				(void) printf(" ");
2356 			zfs_print_perms(ptree);
2357 		}
2358 		item = AVL_NEXT(tree, item);
2359 	}
2360 }
2361 
2362 #define	LINES "-------------------------------------------------------------\n"
2363 static int
2364 zfs_print_allows(char *ds)
2365 {
2366 	zfs_allow_t *curperms, *perms;
2367 	zfs_handle_t *zhp;
2368 	allow_cb_t allowcb = { 0 };
2369 	char banner[MAXPATHLEN];
2370 
2371 	if (ds[0] == '-')
2372 		usage(B_FALSE);
2373 
2374 	if (strrchr(ds, '@')) {
2375 		(void) fprintf(stderr, gettext("Snapshots don't have 'allow'"
2376 		    " permissions\n"));
2377 		return (1);
2378 	}
2379 	if ((zhp = zfs_open(g_zfs, ds, ZFS_TYPE_ANY)) == NULL)
2380 		return (1);
2381 
2382 	if (zfs_perm_get(zhp, &perms)) {
2383 		(void) fprintf(stderr,
2384 		    gettext("Failed to retrieve 'allows' on %s\n"), ds);
2385 		zfs_close(zhp);
2386 		return (1);
2387 	}
2388 
2389 	zfs_close(zhp);
2390 
2391 	if (perms != NULL)
2392 		(void) printf("%s", LINES);
2393 	for (curperms = perms; curperms; curperms = curperms->z_next) {
2394 
2395 		(void) snprintf(banner, sizeof (banner),
2396 		    "Permission sets on (%s)", curperms->z_setpoint);
2397 		allowcb.a_treeoffset =
2398 		    offsetof(zfs_allow_node_t, z_localdescend);
2399 		allowcb.a_permcnt = 0;
2400 		zfs_iter_perms(&curperms->z_sets, banner, &allowcb);
2401 
2402 		(void) snprintf(banner, sizeof (banner),
2403 		    "Create time permissions on (%s)", curperms->z_setpoint);
2404 		allowcb.a_treeoffset =
2405 		    offsetof(zfs_allow_node_t, z_localdescend);
2406 		allowcb.a_permcnt = 0;
2407 		zfs_iter_perms(&curperms->z_crperms, banner, &allowcb);
2408 
2409 
2410 		(void) snprintf(banner, sizeof (banner),
2411 		    "Local permissions on (%s)", curperms->z_setpoint);
2412 		allowcb.a_treeoffset = offsetof(zfs_allow_node_t, z_local);
2413 		allowcb.a_permcnt = 0;
2414 		zfs_iter_perms(&curperms->z_user, banner, &allowcb);
2415 		zfs_iter_perms(&curperms->z_group, banner, &allowcb);
2416 		zfs_iter_perms(&curperms->z_everyone, banner, &allowcb);
2417 
2418 		(void) snprintf(banner, sizeof (banner),
2419 		    "Descendent permissions on (%s)", curperms->z_setpoint);
2420 		allowcb.a_treeoffset = offsetof(zfs_allow_node_t, z_descend);
2421 		allowcb.a_permcnt = 0;
2422 		zfs_iter_perms(&curperms->z_user, banner, &allowcb);
2423 		zfs_iter_perms(&curperms->z_group, banner, &allowcb);
2424 		zfs_iter_perms(&curperms->z_everyone, banner, &allowcb);
2425 
2426 		(void) snprintf(banner, sizeof (banner),
2427 		    "Local+Descendent permissions on (%s)",
2428 		    curperms->z_setpoint);
2429 		allowcb.a_treeoffset =
2430 		    offsetof(zfs_allow_node_t, z_localdescend);
2431 		allowcb.a_permcnt = 0;
2432 		zfs_iter_perms(&curperms->z_user, banner, &allowcb);
2433 		zfs_iter_perms(&curperms->z_group, banner, &allowcb);
2434 		zfs_iter_perms(&curperms->z_everyone, banner, &allowcb);
2435 
2436 		(void) printf("%s", LINES);
2437 	}
2438 	zfs_free_allows(perms);
2439 	return (0);
2440 }
2441 
2442 #define	ALLOWOPTIONS "ldcsu:g:e"
2443 #define	UNALLOWOPTIONS "ldcsu:g:er"
2444 
2445 /*
2446  * Validate options, and build necessary datastructure to display/remove/add
2447  * permissions.
2448  * Returns 0 - If permissions should be added/removed
2449  * Returns 1 - If permissions should be displayed.
2450  * Returns -1 - on failure
2451  */
2452 int
2453 parse_allow_args(int *argc, char **argv[], boolean_t unallow,
2454     char **ds, int *recurse, nvlist_t **zperms)
2455 {
2456 	int c;
2457 	char *options = unallow ? UNALLOWOPTIONS : ALLOWOPTIONS;
2458 	zfs_deleg_inherit_t deleg_type = ZFS_DELEG_NONE;
2459 	zfs_deleg_who_type_t who_type = ZFS_DELEG_WHO_UNKNOWN;
2460 	char *who = NULL;
2461 	char *perms = NULL;
2462 	zfs_handle_t *zhp;
2463 
2464 	while ((c = getopt(*argc, *argv, options)) != -1) {
2465 		switch (c) {
2466 		case 'l':
2467 			if (who_type == ZFS_DELEG_CREATE ||
2468 			    who_type == ZFS_DELEG_NAMED_SET)
2469 				usage(B_FALSE);
2470 
2471 			deleg_type |= ZFS_DELEG_PERM_LOCAL;
2472 			break;
2473 		case 'd':
2474 			if (who_type == ZFS_DELEG_CREATE ||
2475 			    who_type == ZFS_DELEG_NAMED_SET)
2476 				usage(B_FALSE);
2477 
2478 			deleg_type |= ZFS_DELEG_PERM_DESCENDENT;
2479 			break;
2480 		case 'r':
2481 			*recurse = B_TRUE;
2482 			break;
2483 		case 'c':
2484 			if (who_type != ZFS_DELEG_WHO_UNKNOWN)
2485 				usage(B_FALSE);
2486 			if (deleg_type)
2487 				usage(B_FALSE);
2488 			who_type = ZFS_DELEG_CREATE;
2489 			break;
2490 		case 's':
2491 			if (who_type != ZFS_DELEG_WHO_UNKNOWN)
2492 				usage(B_FALSE);
2493 			if (deleg_type)
2494 				usage(B_FALSE);
2495 			who_type = ZFS_DELEG_NAMED_SET;
2496 			break;
2497 		case 'u':
2498 			if (who_type != ZFS_DELEG_WHO_UNKNOWN)
2499 				usage(B_FALSE);
2500 			who_type = ZFS_DELEG_USER;
2501 			who = optarg;
2502 			break;
2503 		case 'g':
2504 			if (who_type != ZFS_DELEG_WHO_UNKNOWN)
2505 				usage(B_FALSE);
2506 			who_type = ZFS_DELEG_GROUP;
2507 			who = optarg;
2508 			break;
2509 		case 'e':
2510 			if (who_type != ZFS_DELEG_WHO_UNKNOWN)
2511 				usage(B_FALSE);
2512 			who_type = ZFS_DELEG_EVERYONE;
2513 			break;
2514 		default:
2515 			usage(B_FALSE);
2516 			break;
2517 		}
2518 	}
2519 
2520 	if (deleg_type == 0)
2521 		deleg_type = ZFS_DELEG_PERM_LOCALDESCENDENT;
2522 
2523 	*argc -= optind;
2524 	*argv += optind;
2525 
2526 	if (unallow == B_FALSE && *argc == 1) {
2527 		/*
2528 		 * Only print permissions if no options were processed
2529 		 */
2530 		if (optind == 1)
2531 			return (1);
2532 		else
2533 			usage(B_FALSE);
2534 	}
2535 
2536 	/*
2537 	 * initialize variables for zfs_build_perms based on number
2538 	 * of arguments.
2539 	 * 3 arguments ==>	zfs [un]allow joe perm,perm,perm <dataset> or
2540 	 *			zfs [un]allow -s @set1 perm,perm <dataset>
2541 	 * 2 arguments ==>	zfs [un]allow -c perm,perm <dataset> or
2542 	 *			zfs [un]allow -u|-g <name> perm <dataset> or
2543 	 *			zfs [un]allow -e perm,perm <dataset>
2544 	 *			zfs unallow joe <dataset>
2545 	 *			zfs unallow -s @set1 <dataset>
2546 	 * 1 argument  ==>	zfs [un]allow -e <dataset> or
2547 	 *			zfs [un]allow -c <dataset>
2548 	 */
2549 
2550 	switch (*argc) {
2551 	case 3:
2552 		perms = (*argv)[1];
2553 		who = (*argv)[0];
2554 		*ds = (*argv)[2];
2555 
2556 		/*
2557 		 * advance argc/argv for do_allow cases.
2558 		 * for do_allow case make sure who have a know who type
2559 		 * and its not a permission set.
2560 		 */
2561 		if (unallow == B_TRUE) {
2562 			*argc -= 2;
2563 			*argv += 2;
2564 		} else if (who_type != ZFS_DELEG_WHO_UNKNOWN &&
2565 		    who_type != ZFS_DELEG_NAMED_SET)
2566 			usage(B_FALSE);
2567 		break;
2568 
2569 	case 2:
2570 		if (unallow == B_TRUE && (who_type == ZFS_DELEG_EVERYONE ||
2571 		    who_type == ZFS_DELEG_CREATE || who != NULL)) {
2572 			perms = (*argv)[0];
2573 			*ds = (*argv)[1];
2574 		} else {
2575 			if (unallow == B_FALSE &&
2576 			    (who_type == ZFS_DELEG_WHO_UNKNOWN ||
2577 			    who_type == ZFS_DELEG_NAMED_SET))
2578 				usage(B_FALSE);
2579 			else if (who_type == ZFS_DELEG_WHO_UNKNOWN ||
2580 			    who_type == ZFS_DELEG_NAMED_SET)
2581 				who = (*argv)[0];
2582 			else if (who_type != ZFS_DELEG_NAMED_SET)
2583 				perms = (*argv)[0];
2584 			*ds = (*argv)[1];
2585 		}
2586 		if (unallow == B_TRUE) {
2587 			(*argc)--;
2588 			(*argv)++;
2589 		}
2590 		break;
2591 
2592 	case 1:
2593 		if (unallow == B_FALSE)
2594 			usage(B_FALSE);
2595 		if (who == NULL && who_type != ZFS_DELEG_CREATE &&
2596 		    who_type != ZFS_DELEG_EVERYONE)
2597 			usage(B_FALSE);
2598 		*ds = (*argv)[0];
2599 		break;
2600 
2601 	default:
2602 		usage(B_FALSE);
2603 	}
2604 
2605 	if (strrchr(*ds, '@')) {
2606 		(void) fprintf(stderr,
2607 		    gettext("Can't set or remove 'allow' permissions "
2608 		    "on snapshots.\n"));
2609 			return (-1);
2610 	}
2611 
2612 	if ((zhp = zfs_open(g_zfs, *ds, ZFS_TYPE_ANY)) == NULL)
2613 		return (-1);
2614 
2615 	if ((zfs_build_perms(zhp, who, perms,
2616 	    who_type, deleg_type, zperms)) != 0) {
2617 		zfs_close(zhp);
2618 		return (-1);
2619 	}
2620 	zfs_close(zhp);
2621 	return (0);
2622 }
2623 
2624 static int
2625 zfs_do_allow(int argc, char **argv)
2626 {
2627 	char *ds;
2628 	nvlist_t *zperms = NULL;
2629 	zfs_handle_t *zhp;
2630 	int unused;
2631 	int ret;
2632 
2633 	if ((ret = parse_allow_args(&argc, &argv, B_FALSE, &ds,
2634 	    &unused, &zperms)) == -1)
2635 		return (1);
2636 
2637 	if (ret == 1)
2638 		return (zfs_print_allows(argv[0]));
2639 
2640 	if ((zhp = zfs_open(g_zfs, ds, ZFS_TYPE_ANY)) == NULL)
2641 		return (1);
2642 
2643 	if (zfs_perm_set(zhp, zperms)) {
2644 		zfs_close(zhp);
2645 		nvlist_free(zperms);
2646 		return (1);
2647 	}
2648 	nvlist_free(zperms);
2649 	zfs_close(zhp);
2650 
2651 	return (0);
2652 }
2653 
2654 static int
2655 unallow_callback(zfs_handle_t *zhp, void *data)
2656 {
2657 	nvlist_t *nvp = (nvlist_t *)data;
2658 	int error;
2659 
2660 	error = zfs_perm_remove(zhp, nvp);
2661 	if (error) {
2662 		(void) fprintf(stderr, gettext("Failed to remove permissions "
2663 		    "on %s\n"), zfs_get_name(zhp));
2664 	}
2665 	return (error);
2666 }
2667 
2668 static int
2669 zfs_do_unallow(int argc, char **argv)
2670 {
2671 	int recurse = B_FALSE;
2672 	char *ds;
2673 	int error;
2674 	nvlist_t *zperms = NULL;
2675 
2676 	if (parse_allow_args(&argc, &argv, B_TRUE,
2677 	    &ds, &recurse, &zperms) == -1)
2678 		return (1);
2679 
2680 	error = zfs_for_each(argc, argv, recurse,
2681 	    ZFS_TYPE_FILESYSTEM|ZFS_TYPE_VOLUME, NULL,
2682 	    NULL, unallow_callback, (void *)zperms, B_FALSE);
2683 
2684 	if (zperms)
2685 		nvlist_free(zperms);
2686 
2687 	return (error);
2688 }
2689 
2690 typedef struct get_all_cbdata {
2691 	zfs_handle_t	**cb_handles;
2692 	size_t		cb_alloc;
2693 	size_t		cb_used;
2694 	uint_t		cb_types;
2695 	boolean_t	cb_verbose;
2696 } get_all_cbdata_t;
2697 
2698 #define	CHECK_SPINNER 30
2699 #define	SPINNER_TIME 3		/* seconds */
2700 #define	MOUNT_TIME 5		/* seconds */
2701 
2702 static int
2703 get_one_dataset(zfs_handle_t *zhp, void *data)
2704 {
2705 	static char spin[] = { '-', '\\', '|', '/' };
2706 	static int spinval = 0;
2707 	static int spincheck = 0;
2708 	static time_t last_spin_time = (time_t)0;
2709 	get_all_cbdata_t *cbp = data;
2710 	zfs_type_t type = zfs_get_type(zhp);
2711 
2712 	if (cbp->cb_verbose) {
2713 		if (--spincheck < 0) {
2714 			time_t now = time(NULL);
2715 			if (last_spin_time + SPINNER_TIME < now) {
2716 				(void) printf("\b%c", spin[spinval++ % 4]);
2717 				(void) fflush(stdout);
2718 				last_spin_time = now;
2719 			}
2720 			spincheck = CHECK_SPINNER;
2721 		}
2722 	}
2723 
2724 	/*
2725 	 * Interate over any nested datasets.
2726 	 */
2727 	if (type == ZFS_TYPE_FILESYSTEM &&
2728 	    zfs_iter_filesystems(zhp, get_one_dataset, data) != 0) {
2729 		zfs_close(zhp);
2730 		return (1);
2731 	}
2732 
2733 	/*
2734 	 * Skip any datasets whose type does not match.
2735 	 */
2736 	if ((type & cbp->cb_types) == 0) {
2737 		zfs_close(zhp);
2738 		return (0);
2739 	}
2740 
2741 	if (cbp->cb_alloc == cbp->cb_used) {
2742 		zfs_handle_t **handles;
2743 
2744 		if (cbp->cb_alloc == 0)
2745 			cbp->cb_alloc = 64;
2746 		else
2747 			cbp->cb_alloc *= 2;
2748 
2749 		handles = safe_malloc(cbp->cb_alloc * sizeof (void *));
2750 
2751 		if (cbp->cb_handles) {
2752 			bcopy(cbp->cb_handles, handles,
2753 			    cbp->cb_used * sizeof (void *));
2754 			free(cbp->cb_handles);
2755 		}
2756 
2757 		cbp->cb_handles = handles;
2758 	}
2759 
2760 	cbp->cb_handles[cbp->cb_used++] = zhp;
2761 
2762 	return (0);
2763 }
2764 
2765 static void
2766 get_all_datasets(uint_t types, zfs_handle_t ***dslist, size_t *count,
2767     boolean_t verbose)
2768 {
2769 	get_all_cbdata_t cb = { 0 };
2770 	cb.cb_types = types;
2771 	cb.cb_verbose = verbose;
2772 
2773 	if (verbose) {
2774 		(void) printf("%s: *", gettext("Reading ZFS config"));
2775 		(void) fflush(stdout);
2776 	}
2777 
2778 	(void) zfs_iter_root(g_zfs, get_one_dataset, &cb);
2779 
2780 	*dslist = cb.cb_handles;
2781 	*count = cb.cb_used;
2782 
2783 	if (verbose) {
2784 		(void) printf("\b%s\n", gettext("done."));
2785 	}
2786 }
2787 
2788 static int
2789 dataset_cmp(const void *a, const void *b)
2790 {
2791 	zfs_handle_t **za = (zfs_handle_t **)a;
2792 	zfs_handle_t **zb = (zfs_handle_t **)b;
2793 	char mounta[MAXPATHLEN];
2794 	char mountb[MAXPATHLEN];
2795 	boolean_t gota, gotb;
2796 
2797 	if ((gota = (zfs_get_type(*za) == ZFS_TYPE_FILESYSTEM)) != 0)
2798 		verify(zfs_prop_get(*za, ZFS_PROP_MOUNTPOINT, mounta,
2799 		    sizeof (mounta), NULL, NULL, 0, B_FALSE) == 0);
2800 	if ((gotb = (zfs_get_type(*zb) == ZFS_TYPE_FILESYSTEM)) != 0)
2801 		verify(zfs_prop_get(*zb, ZFS_PROP_MOUNTPOINT, mountb,
2802 		    sizeof (mountb), NULL, NULL, 0, B_FALSE) == 0);
2803 
2804 	if (gota && gotb)
2805 		return (strcmp(mounta, mountb));
2806 
2807 	if (gota)
2808 		return (-1);
2809 	if (gotb)
2810 		return (1);
2811 
2812 	return (strcmp(zfs_get_name(a), zfs_get_name(b)));
2813 }
2814 
2815 /*
2816  * Generic callback for sharing or mounting filesystems.  Because the code is so
2817  * similar, we have a common function with an extra parameter to determine which
2818  * mode we are using.
2819  */
2820 #define	OP_SHARE	0x1
2821 #define	OP_MOUNT	0x2
2822 
2823 /*
2824  * Share or mount a dataset.
2825  */
2826 static int
2827 share_mount_one(zfs_handle_t *zhp, int op, int flags, boolean_t explicit,
2828     const char *options)
2829 {
2830 	char mountpoint[ZFS_MAXPROPLEN];
2831 	char shareopts[ZFS_MAXPROPLEN];
2832 	const char *cmdname = op == OP_SHARE ? "share" : "mount";
2833 	struct mnttab mnt;
2834 	uint64_t zoned, canmount;
2835 	zfs_type_t type = zfs_get_type(zhp);
2836 
2837 	assert(type & (ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME));
2838 
2839 	if (type == ZFS_TYPE_FILESYSTEM) {
2840 		/*
2841 		 * Check to make sure we can mount/share this dataset.  If we
2842 		 * are in the global zone and the filesystem is exported to a
2843 		 * local zone, or if we are in a local zone and the
2844 		 * filesystem is not exported, then it is an error.
2845 		 */
2846 		zoned = zfs_prop_get_int(zhp, ZFS_PROP_ZONED);
2847 
2848 		if (zoned && getzoneid() == GLOBAL_ZONEID) {
2849 			if (!explicit)
2850 				return (0);
2851 
2852 			(void) fprintf(stderr, gettext("cannot %s '%s': "
2853 			    "dataset is exported to a local zone\n"), cmdname,
2854 			    zfs_get_name(zhp));
2855 			return (1);
2856 
2857 		} else if (!zoned && getzoneid() != GLOBAL_ZONEID) {
2858 			if (!explicit)
2859 				return (0);
2860 
2861 			(void) fprintf(stderr, gettext("cannot %s '%s': "
2862 			    "permission denied\n"), cmdname,
2863 			    zfs_get_name(zhp));
2864 			return (1);
2865 		}
2866 
2867 		/*
2868 		 * Ignore any filesystems which don't apply to us. This
2869 		 * includes those with a legacy mountpoint, or those with
2870 		 * legacy share options.
2871 		 */
2872 		verify(zfs_prop_get(zhp, ZFS_PROP_MOUNTPOINT, mountpoint,
2873 		    sizeof (mountpoint), NULL, NULL, 0, B_FALSE) == 0);
2874 		verify(zfs_prop_get(zhp, ZFS_PROP_SHARENFS, shareopts,
2875 		    sizeof (shareopts), NULL, NULL, 0, B_FALSE) == 0);
2876 		canmount = zfs_prop_get_int(zhp, ZFS_PROP_CANMOUNT);
2877 
2878 		if (op == OP_SHARE && strcmp(shareopts, "off") == 0) {
2879 			if (!explicit)
2880 				return (0);
2881 
2882 			(void) fprintf(stderr, gettext("cannot share '%s': "
2883 			    "legacy share\n"), zfs_get_name(zhp));
2884 			(void) fprintf(stderr, gettext("use share(1M) to "
2885 			    "share this filesystem\n"));
2886 			return (1);
2887 		}
2888 
2889 		/*
2890 		 * We cannot share or mount legacy filesystems. If the
2891 		 * shareopts is non-legacy but the mountpoint is legacy, we
2892 		 * treat it as a legacy share.
2893 		 */
2894 		if (strcmp(mountpoint, "legacy") == 0) {
2895 			if (!explicit)
2896 				return (0);
2897 
2898 			(void) fprintf(stderr, gettext("cannot %s '%s': "
2899 			    "legacy mountpoint\n"), cmdname, zfs_get_name(zhp));
2900 			(void) fprintf(stderr, gettext("use %s to "
2901 			    "%s this filesystem\n"), op == OP_SHARE ?
2902 			    "share(1M)" : "mount(1M)", cmdname);
2903 			return (1);
2904 		}
2905 
2906 		if (strcmp(mountpoint, "none") == 0) {
2907 			if (!explicit)
2908 				return (0);
2909 
2910 			(void) fprintf(stderr, gettext("cannot %s '%s': no "
2911 			    "mountpoint set\n"), cmdname, zfs_get_name(zhp));
2912 			return (1);
2913 		}
2914 
2915 		if (!canmount) {
2916 			if (!explicit)
2917 				return (0);
2918 
2919 			(void) fprintf(stderr, gettext("cannot %s '%s': "
2920 			    "'canmount' property is set to 'off'\n"), cmdname,
2921 			    zfs_get_name(zhp));
2922 			return (1);
2923 		}
2924 
2925 		/*
2926 		 * At this point, we have verified that the mountpoint and/or
2927 		 * shareopts are appropriate for auto management. If the
2928 		 * filesystem is already mounted or shared, return (failing
2929 		 * for explicit requests); otherwise mount or share the
2930 		 * filesystem.
2931 		 */
2932 		switch (op) {
2933 		case OP_SHARE:
2934 			if (zfs_is_shared_nfs(zhp, NULL)) {
2935 				if (!explicit)
2936 					return (0);
2937 
2938 				(void) fprintf(stderr, gettext("cannot share "
2939 				    "'%s': filesystem already shared\n"),
2940 				    zfs_get_name(zhp));
2941 				return (1);
2942 			}
2943 
2944 			if (!zfs_is_mounted(zhp, NULL) &&
2945 			    zfs_mount(zhp, NULL, 0) != 0)
2946 				return (1);
2947 
2948 			if (zfs_share_nfs(zhp) != 0)
2949 				return (1);
2950 			break;
2951 
2952 		case OP_MOUNT:
2953 			if (options == NULL)
2954 				mnt.mnt_mntopts = "";
2955 			else
2956 				mnt.mnt_mntopts = (char *)options;
2957 
2958 			if (!hasmntopt(&mnt, MNTOPT_REMOUNT) &&
2959 			    zfs_is_mounted(zhp, NULL)) {
2960 				if (!explicit)
2961 					return (0);
2962 
2963 				(void) fprintf(stderr, gettext("cannot mount "
2964 				    "'%s': filesystem already mounted\n"),
2965 				    zfs_get_name(zhp));
2966 				return (1);
2967 			}
2968 
2969 			if (zfs_mount(zhp, options, flags) != 0)
2970 				return (1);
2971 			break;
2972 		}
2973 	} else {
2974 		assert(op == OP_SHARE);
2975 
2976 		/*
2977 		 * Ignore any volumes that aren't shared.
2978 		 */
2979 		verify(zfs_prop_get(zhp, ZFS_PROP_SHAREISCSI, shareopts,
2980 		    sizeof (shareopts), NULL, NULL, 0, B_FALSE) == 0);
2981 
2982 		if (strcmp(shareopts, "off") == 0) {
2983 			if (!explicit)
2984 				return (0);
2985 
2986 			(void) fprintf(stderr, gettext("cannot share '%s': "
2987 			    "'shareiscsi' property not set\n"),
2988 			    zfs_get_name(zhp));
2989 			(void) fprintf(stderr, gettext("set 'shareiscsi' "
2990 			    "property or use iscsitadm(1M) to share this "
2991 			    "volume\n"));
2992 			return (1);
2993 		}
2994 
2995 		if (zfs_is_shared_iscsi(zhp)) {
2996 			if (!explicit)
2997 				return (0);
2998 
2999 			(void) fprintf(stderr, gettext("cannot share "
3000 			    "'%s': volume already shared\n"),
3001 			    zfs_get_name(zhp));
3002 			return (1);
3003 		}
3004 
3005 		if (zfs_share_iscsi(zhp) != 0)
3006 			return (1);
3007 	}
3008 
3009 	return (0);
3010 }
3011 
3012 /*
3013  * Reports progress in the form "(current/total)".  Not thread-safe.
3014  */
3015 static void
3016 report_mount_progress(int current, int total)
3017 {
3018 	static int len;
3019 	static char *reverse = "\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"
3020 	    "\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
3021 	static time_t last_progress_time;
3022 	time_t now = time(NULL);
3023 
3024 	/* report 1..n instead of 0..n-1 */
3025 	++current;
3026 
3027 	/* display header if we're here for the first time */
3028 	if (current == 1) {
3029 		(void) printf(gettext("Mounting ZFS filesystems: "));
3030 		len = 0;
3031 	} else if (current != total && last_progress_time + MOUNT_TIME >= now)
3032 		return;		/* too soon to report again */
3033 
3034 	last_progress_time = now;
3035 
3036 	/* back up to prepare for overwriting */
3037 	if (len)
3038 		(void) printf("%*.*s", len, len, reverse);
3039 
3040 	/* We put a newline at the end if this is the last one.  */
3041 	len = printf("(%d/%d)%s", current, total, current == total ? "\n" : "");
3042 	(void) fflush(stdout);
3043 }
3044 
3045 static int
3046 share_mount(int op, int argc, char **argv)
3047 {
3048 	int do_all = 0;
3049 	boolean_t verbose = B_FALSE;
3050 	int c, ret = 0;
3051 	const char *options = NULL;
3052 	int types, flags = 0;
3053 
3054 	/* check options */
3055 	while ((c = getopt(argc, argv, op == OP_MOUNT ? ":avo:O" : "a"))
3056 	    != -1) {
3057 		switch (c) {
3058 		case 'a':
3059 			do_all = 1;
3060 			break;
3061 		case 'v':
3062 			verbose = B_TRUE;
3063 			break;
3064 		case 'o':
3065 			if (strlen(optarg) <= MNT_LINE_MAX) {
3066 				options = optarg;
3067 				break;
3068 			}
3069 			(void) fprintf(stderr, gettext("the opts argument for "
3070 			    "'%c' option is too long (more than %d chars)\n"),
3071 			    optopt, MNT_LINE_MAX);
3072 			usage(B_FALSE);
3073 			break;
3074 
3075 		case 'O':
3076 			flags |= MS_OVERLAY;
3077 			break;
3078 		case ':':
3079 			(void) fprintf(stderr, gettext("missing argument for "
3080 			    "'%c' option\n"), optopt);
3081 			usage(B_FALSE);
3082 			break;
3083 		case '?':
3084 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
3085 			    optopt);
3086 			usage(B_FALSE);
3087 		}
3088 	}
3089 
3090 	argc -= optind;
3091 	argv += optind;
3092 
3093 	/* check number of arguments */
3094 	if (do_all) {
3095 		zfs_handle_t **dslist = NULL;
3096 		size_t i, count = 0;
3097 
3098 		if (op == OP_MOUNT) {
3099 			types = ZFS_TYPE_FILESYSTEM;
3100 		} else if (argc > 0) {
3101 			if (strcmp(argv[0], "nfs") == 0) {
3102 				types = ZFS_TYPE_FILESYSTEM;
3103 			} else if (strcmp(argv[0], "iscsi") == 0) {
3104 				types = ZFS_TYPE_VOLUME;
3105 			} else {
3106 				(void) fprintf(stderr, gettext("share type "
3107 				    "must be 'nfs' or 'iscsi'\n"));
3108 				usage(B_FALSE);
3109 			}
3110 
3111 			argc--;
3112 			argv++;
3113 		} else {
3114 			types = ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME;
3115 		}
3116 
3117 		if (argc != 0) {
3118 			(void) fprintf(stderr, gettext("too many arguments\n"));
3119 			usage(B_FALSE);
3120 		}
3121 
3122 		get_all_datasets(types, &dslist, &count, verbose);
3123 
3124 		if (count == 0)
3125 			return (0);
3126 
3127 		qsort(dslist, count, sizeof (void *), dataset_cmp);
3128 
3129 		for (i = 0; i < count; i++) {
3130 			if (verbose)
3131 				report_mount_progress(i, count);
3132 
3133 			if (share_mount_one(dslist[i], op, flags, B_FALSE,
3134 			    options) != 0)
3135 				ret = 1;
3136 			zfs_close(dslist[i]);
3137 		}
3138 
3139 		free(dslist);
3140 	} else if (argc == 0) {
3141 		struct mnttab entry;
3142 
3143 		if ((op == OP_SHARE) || (options != NULL)) {
3144 			(void) fprintf(stderr, gettext("missing filesystem "
3145 			    "argument (specify -a for all)\n"));
3146 			usage(B_FALSE);
3147 		}
3148 
3149 		/*
3150 		 * When mount is given no arguments, go through /etc/mnttab and
3151 		 * display any active ZFS mounts.  We hide any snapshots, since
3152 		 * they are controlled automatically.
3153 		 */
3154 		rewind(mnttab_file);
3155 		while (getmntent(mnttab_file, &entry) == 0) {
3156 			if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0 ||
3157 			    strchr(entry.mnt_special, '@') != NULL)
3158 				continue;
3159 
3160 			(void) printf("%-30s  %s\n", entry.mnt_special,
3161 			    entry.mnt_mountp);
3162 		}
3163 
3164 	} else {
3165 		zfs_handle_t *zhp;
3166 
3167 		types = ZFS_TYPE_FILESYSTEM;
3168 		if (op == OP_SHARE)
3169 			types |= ZFS_TYPE_VOLUME;
3170 
3171 		if (argc > 1) {
3172 			(void) fprintf(stderr,
3173 			    gettext("too many arguments\n"));
3174 			usage(B_FALSE);
3175 		}
3176 
3177 		if ((zhp = zfs_open(g_zfs, argv[0], types)) == NULL) {
3178 			ret = 1;
3179 		} else {
3180 			ret = share_mount_one(zhp, op, flags, B_TRUE,
3181 			    options);
3182 			zfs_close(zhp);
3183 		}
3184 	}
3185 
3186 	return (ret);
3187 }
3188 
3189 /*
3190  * zfs mount -a [nfs | iscsi]
3191  * zfs mount filesystem
3192  *
3193  * Mount all filesystems, or mount the given filesystem.
3194  */
3195 static int
3196 zfs_do_mount(int argc, char **argv)
3197 {
3198 	return (share_mount(OP_MOUNT, argc, argv));
3199 }
3200 
3201 /*
3202  * zfs share -a [nfs | iscsi]
3203  * zfs share filesystem
3204  *
3205  * Share all filesystems, or share the given filesystem.
3206  */
3207 static int
3208 zfs_do_share(int argc, char **argv)
3209 {
3210 	return (share_mount(OP_SHARE, argc, argv));
3211 }
3212 
3213 typedef struct unshare_unmount_node {
3214 	zfs_handle_t	*un_zhp;
3215 	char		*un_mountp;
3216 	uu_avl_node_t	un_avlnode;
3217 } unshare_unmount_node_t;
3218 
3219 /* ARGSUSED */
3220 static int
3221 unshare_unmount_compare(const void *larg, const void *rarg, void *unused)
3222 {
3223 	const unshare_unmount_node_t *l = larg;
3224 	const unshare_unmount_node_t *r = rarg;
3225 
3226 	return (strcmp(l->un_mountp, r->un_mountp));
3227 }
3228 
3229 /*
3230  * Convenience routine used by zfs_do_umount() and manual_unmount().  Given an
3231  * absolute path, find the entry /etc/mnttab, verify that its a ZFS filesystem,
3232  * and unmount it appropriately.
3233  */
3234 static int
3235 unshare_unmount_path(int op, char *path, int flags, boolean_t is_manual)
3236 {
3237 	zfs_handle_t *zhp;
3238 	int ret;
3239 	struct stat64 statbuf;
3240 	struct extmnttab entry;
3241 	const char *cmdname = (op == OP_SHARE) ? "unshare" : "unmount";
3242 	char property[ZFS_MAXPROPLEN];
3243 
3244 	/*
3245 	 * Search for the path in /etc/mnttab.  Rather than looking for the
3246 	 * specific path, which can be fooled by non-standard paths (i.e. ".."
3247 	 * or "//"), we stat() the path and search for the corresponding
3248 	 * (major,minor) device pair.
3249 	 */
3250 	if (stat64(path, &statbuf) != 0) {
3251 		(void) fprintf(stderr, gettext("cannot %s '%s': %s\n"),
3252 		    cmdname, path, strerror(errno));
3253 		return (1);
3254 	}
3255 
3256 	/*
3257 	 * Search for the given (major,minor) pair in the mount table.
3258 	 */
3259 	rewind(mnttab_file);
3260 	while ((ret = getextmntent(mnttab_file, &entry, 0)) == 0) {
3261 		if (entry.mnt_major == major(statbuf.st_dev) &&
3262 		    entry.mnt_minor == minor(statbuf.st_dev))
3263 			break;
3264 	}
3265 	if (ret != 0) {
3266 		(void) fprintf(stderr, gettext("cannot %s '%s': not "
3267 		    "currently mounted\n"), cmdname, path);
3268 		return (1);
3269 	}
3270 
3271 	if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0) {
3272 		(void) fprintf(stderr, gettext("cannot %s '%s': not a ZFS "
3273 		    "filesystem\n"), cmdname, path);
3274 		return (1);
3275 	}
3276 
3277 	if ((zhp = zfs_open(g_zfs, entry.mnt_special,
3278 	    ZFS_TYPE_FILESYSTEM)) == NULL)
3279 		return (1);
3280 
3281 	verify(zfs_prop_get(zhp, op == OP_SHARE ?
3282 	    ZFS_PROP_SHARENFS : ZFS_PROP_MOUNTPOINT, property,
3283 	    sizeof (property), NULL, NULL, 0, B_FALSE) == 0);
3284 
3285 	if (op == OP_SHARE) {
3286 		if (strcmp(property, "off") == 0) {
3287 			(void) fprintf(stderr, gettext("cannot unshare "
3288 			    "'%s': legacy share\n"), path);
3289 			(void) fprintf(stderr, gettext("use "
3290 			    "unshare(1M) to unshare this filesystem\n"));
3291 			ret = 1;
3292 		} else if (!zfs_is_shared_nfs(zhp, NULL)) {
3293 			(void) fprintf(stderr, gettext("cannot unshare '%s': "
3294 			    "not currently shared\n"), path);
3295 			ret = 1;
3296 		} else {
3297 			ret = zfs_unshareall_nfs(zhp);
3298 		}
3299 	} else {
3300 		if (is_manual) {
3301 			ret = zfs_unmount(zhp, NULL, flags);
3302 		} else if (strcmp(property, "legacy") == 0) {
3303 			(void) fprintf(stderr, gettext("cannot unmount "
3304 			    "'%s': legacy mountpoint\n"),
3305 			    zfs_get_name(zhp));
3306 			(void) fprintf(stderr, gettext("use umount(1M) "
3307 			    "to unmount this filesystem\n"));
3308 			ret = 1;
3309 		} else {
3310 			ret = zfs_unmountall(zhp, flags);
3311 		}
3312 	}
3313 
3314 	zfs_close(zhp);
3315 
3316 	return (ret != 0);
3317 }
3318 
3319 /*
3320  * Generic callback for unsharing or unmounting a filesystem.
3321  */
3322 static int
3323 unshare_unmount(int op, int argc, char **argv)
3324 {
3325 	int do_all = 0;
3326 	int flags = 0;
3327 	int ret = 0;
3328 	int types, c;
3329 	zfs_handle_t *zhp;
3330 	char property[ZFS_MAXPROPLEN];
3331 
3332 	/* check options */
3333 	while ((c = getopt(argc, argv, op == OP_SHARE ? "a" : "af")) != -1) {
3334 		switch (c) {
3335 		case 'a':
3336 			do_all = 1;
3337 			break;
3338 		case 'f':
3339 			flags = MS_FORCE;
3340 			break;
3341 		case '?':
3342 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
3343 			    optopt);
3344 			usage(B_FALSE);
3345 		}
3346 	}
3347 
3348 	argc -= optind;
3349 	argv += optind;
3350 
3351 	if (do_all) {
3352 		/*
3353 		 * We could make use of zfs_for_each() to walk all datasets in
3354 		 * the system, but this would be very inefficient, especially
3355 		 * since we would have to linearly search /etc/mnttab for each
3356 		 * one.  Instead, do one pass through /etc/mnttab looking for
3357 		 * zfs entries and call zfs_unmount() for each one.
3358 		 *
3359 		 * Things get a little tricky if the administrator has created
3360 		 * mountpoints beneath other ZFS filesystems.  In this case, we
3361 		 * have to unmount the deepest filesystems first.  To accomplish
3362 		 * this, we place all the mountpoints in an AVL tree sorted by
3363 		 * the special type (dataset name), and walk the result in
3364 		 * reverse to make sure to get any snapshots first.
3365 		 */
3366 		struct mnttab entry;
3367 		uu_avl_pool_t *pool;
3368 		uu_avl_t *tree;
3369 		unshare_unmount_node_t *node;
3370 		uu_avl_index_t idx;
3371 		uu_avl_walk_t *walk;
3372 
3373 		if (argc != 0) {
3374 			(void) fprintf(stderr, gettext("too many arguments\n"));
3375 			usage(B_FALSE);
3376 		}
3377 
3378 		if ((pool = uu_avl_pool_create("unmount_pool",
3379 		    sizeof (unshare_unmount_node_t),
3380 		    offsetof(unshare_unmount_node_t, un_avlnode),
3381 		    unshare_unmount_compare,
3382 		    UU_DEFAULT)) == NULL) {
3383 			(void) fprintf(stderr, gettext("internal error: "
3384 			    "out of memory\n"));
3385 			exit(1);
3386 		}
3387 
3388 		if ((tree = uu_avl_create(pool, NULL, UU_DEFAULT)) == NULL) {
3389 			(void) fprintf(stderr, gettext("internal error: "
3390 			    "out of memory\n"));
3391 			exit(1);
3392 		}
3393 
3394 		rewind(mnttab_file);
3395 		while (getmntent(mnttab_file, &entry) == 0) {
3396 
3397 			/* ignore non-ZFS entries */
3398 			if (strcmp(entry.mnt_fstype, MNTTYPE_ZFS) != 0)
3399 				continue;
3400 
3401 			/* ignore snapshots */
3402 			if (strchr(entry.mnt_special, '@') != NULL)
3403 				continue;
3404 
3405 			if ((zhp = zfs_open(g_zfs, entry.mnt_special,
3406 			    ZFS_TYPE_FILESYSTEM)) == NULL) {
3407 				ret = 1;
3408 				continue;
3409 			}
3410 
3411 			verify(zfs_prop_get(zhp, op == OP_SHARE ?
3412 			    ZFS_PROP_SHARENFS : ZFS_PROP_MOUNTPOINT,
3413 			    property, sizeof (property), NULL, NULL,
3414 			    0, B_FALSE) == 0);
3415 
3416 			/* Ignore legacy mounts and shares */
3417 			if ((op == OP_SHARE &&
3418 			    strcmp(property, "off") == 0) ||
3419 			    (op == OP_MOUNT &&
3420 			    strcmp(property, "legacy") == 0)) {
3421 				zfs_close(zhp);
3422 				continue;
3423 			}
3424 
3425 			node = safe_malloc(sizeof (unshare_unmount_node_t));
3426 			node->un_zhp = zhp;
3427 
3428 			if ((node->un_mountp = strdup(entry.mnt_mountp)) ==
3429 			    NULL) {
3430 				(void) fprintf(stderr, gettext("internal error:"
3431 				    " out of memory\n"));
3432 				exit(1);
3433 			}
3434 
3435 			uu_avl_node_init(node, &node->un_avlnode, pool);
3436 
3437 			if (uu_avl_find(tree, node, NULL, &idx) == NULL) {
3438 				uu_avl_insert(tree, node, idx);
3439 			} else {
3440 				zfs_close(node->un_zhp);
3441 				free(node->un_mountp);
3442 				free(node);
3443 			}
3444 		}
3445 
3446 		/*
3447 		 * Walk the AVL tree in reverse, unmounting each filesystem and
3448 		 * removing it from the AVL tree in the process.
3449 		 */
3450 		if ((walk = uu_avl_walk_start(tree,
3451 		    UU_WALK_REVERSE | UU_WALK_ROBUST)) == NULL) {
3452 			(void) fprintf(stderr,
3453 			    gettext("internal error: out of memory"));
3454 			exit(1);
3455 		}
3456 
3457 		while ((node = uu_avl_walk_next(walk)) != NULL) {
3458 			uu_avl_remove(tree, node);
3459 
3460 			switch (op) {
3461 			case OP_SHARE:
3462 				if (zfs_unshare_nfs(node->un_zhp,
3463 				    node->un_mountp) != 0)
3464 					ret = 1;
3465 				break;
3466 
3467 			case OP_MOUNT:
3468 				if (zfs_unmount(node->un_zhp,
3469 				    node->un_mountp, flags) != 0)
3470 					ret = 1;
3471 				break;
3472 			}
3473 
3474 			zfs_close(node->un_zhp);
3475 			free(node->un_mountp);
3476 			free(node);
3477 		}
3478 
3479 		uu_avl_walk_end(walk);
3480 		uu_avl_destroy(tree);
3481 		uu_avl_pool_destroy(pool);
3482 
3483 		if (op == OP_SHARE) {
3484 			/*
3485 			 * Finally, unshare any volumes shared via iSCSI.
3486 			 */
3487 			zfs_handle_t **dslist = NULL;
3488 			size_t i, count = 0;
3489 
3490 			get_all_datasets(ZFS_TYPE_VOLUME, &dslist, &count,
3491 			    B_FALSE);
3492 
3493 			if (count != 0) {
3494 				qsort(dslist, count, sizeof (void *),
3495 				    dataset_cmp);
3496 
3497 				for (i = 0; i < count; i++) {
3498 					if (zfs_unshare_iscsi(dslist[i]) != 0)
3499 						ret = 1;
3500 					zfs_close(dslist[i]);
3501 				}
3502 
3503 				free(dslist);
3504 			}
3505 		}
3506 	} else {
3507 		if (argc != 1) {
3508 			if (argc == 0)
3509 				(void) fprintf(stderr,
3510 				    gettext("missing filesystem argument\n"));
3511 			else
3512 				(void) fprintf(stderr,
3513 				    gettext("too many arguments\n"));
3514 			usage(B_FALSE);
3515 		}
3516 
3517 		/*
3518 		 * We have an argument, but it may be a full path or a ZFS
3519 		 * filesystem.  Pass full paths off to unmount_path() (shared by
3520 		 * manual_unmount), otherwise open the filesystem and pass to
3521 		 * zfs_unmount().
3522 		 */
3523 		if (argv[0][0] == '/')
3524 			return (unshare_unmount_path(op, argv[0],
3525 			    flags, B_FALSE));
3526 
3527 		types = ZFS_TYPE_FILESYSTEM;
3528 		if (op == OP_SHARE)
3529 			types |= ZFS_TYPE_VOLUME;
3530 
3531 		if ((zhp = zfs_open(g_zfs, argv[0], types)) == NULL)
3532 			return (1);
3533 
3534 		if (zfs_get_type(zhp) == ZFS_TYPE_FILESYSTEM) {
3535 			verify(zfs_prop_get(zhp, op == OP_SHARE ?
3536 			    ZFS_PROP_SHARENFS : ZFS_PROP_MOUNTPOINT, property,
3537 			    sizeof (property), NULL, NULL, 0, B_FALSE) == 0);
3538 
3539 			switch (op) {
3540 			case OP_SHARE:
3541 				if (strcmp(property, "off") == 0) {
3542 					(void) fprintf(stderr, gettext("cannot "
3543 					    "unshare '%s': legacy share\n"),
3544 					    zfs_get_name(zhp));
3545 					(void) fprintf(stderr, gettext("use "
3546 					    "unshare(1M) to unshare this "
3547 					    "filesystem\n"));
3548 					ret = 1;
3549 				} else if (!zfs_is_shared_nfs(zhp, NULL)) {
3550 					(void) fprintf(stderr, gettext("cannot "
3551 					    "unshare '%s': not currently "
3552 					    "shared\n"), zfs_get_name(zhp));
3553 					ret = 1;
3554 				} else if (zfs_unshareall_nfs(zhp) != 0) {
3555 					ret = 1;
3556 				}
3557 				break;
3558 
3559 			case OP_MOUNT:
3560 				if (strcmp(property, "legacy") == 0) {
3561 					(void) fprintf(stderr, gettext("cannot "
3562 					    "unmount '%s': legacy "
3563 					    "mountpoint\n"), zfs_get_name(zhp));
3564 					(void) fprintf(stderr, gettext("use "
3565 					    "umount(1M) to unmount this "
3566 					    "filesystem\n"));
3567 					ret = 1;
3568 				} else if (!zfs_is_mounted(zhp, NULL)) {
3569 					(void) fprintf(stderr, gettext("cannot "
3570 					    "unmount '%s': not currently "
3571 					    "mounted\n"),
3572 					    zfs_get_name(zhp));
3573 					ret = 1;
3574 				} else if (zfs_unmountall(zhp, flags) != 0) {
3575 					ret = 1;
3576 				}
3577 				break;
3578 			}
3579 		} else {
3580 			assert(op == OP_SHARE);
3581 
3582 			verify(zfs_prop_get(zhp, ZFS_PROP_SHAREISCSI, property,
3583 			    sizeof (property), NULL, NULL, 0, B_FALSE) == 0);
3584 
3585 			if (strcmp(property, "off") == 0) {
3586 				(void) fprintf(stderr, gettext("cannot unshare "
3587 				    "'%s': 'shareiscsi' property not set\n"),
3588 				    zfs_get_name(zhp));
3589 				(void) fprintf(stderr, gettext("set "
3590 				    "'shareiscsi' property or use "
3591 				    "iscsitadm(1M) to share this volume\n"));
3592 				ret = 1;
3593 			} else if (!zfs_is_shared_iscsi(zhp)) {
3594 				(void) fprintf(stderr, gettext("cannot "
3595 				    "unshare '%s': not currently shared\n"),
3596 				    zfs_get_name(zhp));
3597 				ret = 1;
3598 			} else if (zfs_unshare_iscsi(zhp) != 0) {
3599 				ret = 1;
3600 			}
3601 		}
3602 
3603 		zfs_close(zhp);
3604 	}
3605 
3606 	return (ret);
3607 }
3608 
3609 /*
3610  * zfs unmount -a
3611  * zfs unmount filesystem
3612  *
3613  * Unmount all filesystems, or a specific ZFS filesystem.
3614  */
3615 static int
3616 zfs_do_unmount(int argc, char **argv)
3617 {
3618 	return (unshare_unmount(OP_MOUNT, argc, argv));
3619 }
3620 
3621 /*
3622  * zfs unshare -a
3623  * zfs unshare filesystem
3624  *
3625  * Unshare all filesystems, or a specific ZFS filesystem.
3626  */
3627 static int
3628 zfs_do_unshare(int argc, char **argv)
3629 {
3630 	return (unshare_unmount(OP_SHARE, argc, argv));
3631 }
3632 
3633 /*
3634  * Called when invoked as /etc/fs/zfs/mount.  Do the mount if the mountpoint is
3635  * 'legacy'.  Otherwise, complain that use should be using 'zfs mount'.
3636  */
3637 static int
3638 manual_mount(int argc, char **argv)
3639 {
3640 	zfs_handle_t *zhp;
3641 	char mountpoint[ZFS_MAXPROPLEN];
3642 	char mntopts[MNT_LINE_MAX] = { '\0' };
3643 	int ret;
3644 	int c;
3645 	int flags = 0;
3646 	char *dataset, *path;
3647 
3648 	/* check options */
3649 	while ((c = getopt(argc, argv, ":mo:O")) != -1) {
3650 		switch (c) {
3651 		case 'o':
3652 			(void) strlcpy(mntopts, optarg, sizeof (mntopts));
3653 			break;
3654 		case 'O':
3655 			flags |= MS_OVERLAY;
3656 			break;
3657 		case 'm':
3658 			flags |= MS_NOMNTTAB;
3659 			break;
3660 		case ':':
3661 			(void) fprintf(stderr, gettext("missing argument for "
3662 			    "'%c' option\n"), optopt);
3663 			usage(B_FALSE);
3664 			break;
3665 		case '?':
3666 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
3667 			    optopt);
3668 			(void) fprintf(stderr, gettext("usage: mount [-o opts] "
3669 			    "<path>\n"));
3670 			return (2);
3671 		}
3672 	}
3673 
3674 	argc -= optind;
3675 	argv += optind;
3676 
3677 	/* check that we only have two arguments */
3678 	if (argc != 2) {
3679 		if (argc == 0)
3680 			(void) fprintf(stderr, gettext("missing dataset "
3681 			    "argument\n"));
3682 		else if (argc == 1)
3683 			(void) fprintf(stderr,
3684 			    gettext("missing mountpoint argument\n"));
3685 		else
3686 			(void) fprintf(stderr, gettext("too many arguments\n"));
3687 		(void) fprintf(stderr, "usage: mount <dataset> <mountpoint>\n");
3688 		return (2);
3689 	}
3690 
3691 	dataset = argv[0];
3692 	path = argv[1];
3693 
3694 	/* try to open the dataset */
3695 	if ((zhp = zfs_open(g_zfs, dataset, ZFS_TYPE_FILESYSTEM)) == NULL)
3696 		return (1);
3697 
3698 	(void) zfs_prop_get(zhp, ZFS_PROP_MOUNTPOINT, mountpoint,
3699 	    sizeof (mountpoint), NULL, NULL, 0, B_FALSE);
3700 
3701 	/* check for legacy mountpoint and complain appropriately */
3702 	ret = 0;
3703 	if (strcmp(mountpoint, ZFS_MOUNTPOINT_LEGACY) == 0) {
3704 		if (mount(dataset, path, MS_OPTIONSTR | flags, MNTTYPE_ZFS,
3705 		    NULL, 0, mntopts, sizeof (mntopts)) != 0) {
3706 			(void) fprintf(stderr, gettext("mount failed: %s\n"),
3707 			    strerror(errno));
3708 			ret = 1;
3709 		}
3710 	} else {
3711 		(void) fprintf(stderr, gettext("filesystem '%s' cannot be "
3712 		    "mounted using 'mount -F zfs'\n"), dataset);
3713 		(void) fprintf(stderr, gettext("Use 'zfs set mountpoint=%s' "
3714 		    "instead.\n"), path);
3715 		(void) fprintf(stderr, gettext("If you must use 'mount -F zfs' "
3716 		    "or /etc/vfstab, use 'zfs set mountpoint=legacy'.\n"));
3717 		(void) fprintf(stderr, gettext("See zfs(1M) for more "
3718 		    "information.\n"));
3719 		ret = 1;
3720 	}
3721 
3722 	return (ret);
3723 }
3724 
3725 /*
3726  * Called when invoked as /etc/fs/zfs/umount.  Unlike a manual mount, we allow
3727  * unmounts of non-legacy filesystems, as this is the dominant administrative
3728  * interface.
3729  */
3730 static int
3731 manual_unmount(int argc, char **argv)
3732 {
3733 	int flags = 0;
3734 	int c;
3735 
3736 	/* check options */
3737 	while ((c = getopt(argc, argv, "f")) != -1) {
3738 		switch (c) {
3739 		case 'f':
3740 			flags = MS_FORCE;
3741 			break;
3742 		case '?':
3743 			(void) fprintf(stderr, gettext("invalid option '%c'\n"),
3744 			    optopt);
3745 			(void) fprintf(stderr, gettext("usage: unmount [-f] "
3746 			    "<path>\n"));
3747 			return (2);
3748 		}
3749 	}
3750 
3751 	argc -= optind;
3752 	argv += optind;
3753 
3754 	/* check arguments */
3755 	if (argc != 1) {
3756 		if (argc == 0)
3757 			(void) fprintf(stderr, gettext("missing path "
3758 			    "argument\n"));
3759 		else
3760 			(void) fprintf(stderr, gettext("too many arguments\n"));
3761 		(void) fprintf(stderr, gettext("usage: unmount [-f] <path>\n"));
3762 		return (2);
3763 	}
3764 
3765 	return (unshare_unmount_path(OP_MOUNT, argv[0], flags, B_TRUE));
3766 }
3767 
3768 static int
3769 volcheck(zpool_handle_t *zhp, void *data)
3770 {
3771 	boolean_t isinit = *((boolean_t *)data);
3772 
3773 	if (isinit)
3774 		return (zpool_create_zvol_links(zhp));
3775 	else
3776 		return (zpool_remove_zvol_links(zhp));
3777 }
3778 
3779 /*
3780  * Iterate over all pools in the system and either create or destroy /dev/zvol
3781  * links, depending on the value of 'isinit'.
3782  */
3783 static int
3784 do_volcheck(boolean_t isinit)
3785 {
3786 	return (zpool_iter(g_zfs, volcheck, &isinit) ? 1 : 0);
3787 }
3788 
3789 static int
3790 find_command_idx(char *command, int *idx)
3791 {
3792 	int i;
3793 
3794 	for (i = 0; i < NCOMMAND; i++) {
3795 		if (command_table[i].name == NULL)
3796 			continue;
3797 
3798 		if (strcmp(command, command_table[i].name) == 0) {
3799 			*idx = i;
3800 			return (0);
3801 		}
3802 	}
3803 	return (1);
3804 }
3805 
3806 int
3807 main(int argc, char **argv)
3808 {
3809 	int ret;
3810 	int i;
3811 	char *progname;
3812 	char *cmdname;
3813 
3814 	(void) setlocale(LC_ALL, "");
3815 	(void) textdomain(TEXT_DOMAIN);
3816 
3817 	opterr = 0;
3818 
3819 	first_argc = argc;
3820 	first_argv = argv;
3821 
3822 	if ((g_zfs = libzfs_init()) == NULL) {
3823 		(void) fprintf(stderr, gettext("internal error: failed to "
3824 		    "initialize ZFS library\n"));
3825 		return (1);
3826 	}
3827 
3828 	zpool_stage_history(g_zfs, argc, argv, B_TRUE);
3829 
3830 	libzfs_print_on_error(g_zfs, B_TRUE);
3831 
3832 	if ((mnttab_file = fopen(MNTTAB, "r")) == NULL) {
3833 		(void) fprintf(stderr, gettext("internal error: unable to "
3834 		    "open %s\n"), MNTTAB);
3835 		return (1);
3836 	}
3837 
3838 	/*
3839 	 * This command also doubles as the /etc/fs mount and unmount program.
3840 	 * Determine if we should take this behavior based on argv[0].
3841 	 */
3842 	progname = basename(argv[0]);
3843 	if (strcmp(progname, "mount") == 0) {
3844 		ret = manual_mount(argc, argv);
3845 	} else if (strcmp(progname, "umount") == 0) {
3846 		ret = manual_unmount(argc, argv);
3847 	} else {
3848 		/*
3849 		 * Make sure the user has specified some command.
3850 		 */
3851 		if (argc < 2) {
3852 			(void) fprintf(stderr, gettext("missing command\n"));
3853 			usage(B_FALSE);
3854 		}
3855 
3856 		cmdname = argv[1];
3857 
3858 		/*
3859 		 * The 'umount' command is an alias for 'unmount'
3860 		 */
3861 		if (strcmp(cmdname, "umount") == 0)
3862 			cmdname = "unmount";
3863 
3864 		/*
3865 		 * The 'recv' command is an alias for 'receive'
3866 		 */
3867 		if (strcmp(cmdname, "recv") == 0)
3868 			cmdname = "receive";
3869 
3870 		/*
3871 		 * Special case '-?'
3872 		 */
3873 		if (strcmp(cmdname, "-?") == 0)
3874 			usage(B_TRUE);
3875 
3876 		/*
3877 		 * 'volinit' and 'volfini' do not appear in the usage message,
3878 		 * so we have to special case them here.
3879 		 */
3880 		if (strcmp(cmdname, "volinit") == 0)
3881 			return (do_volcheck(B_TRUE));
3882 		else if (strcmp(cmdname, "volfini") == 0)
3883 			return (do_volcheck(B_FALSE));
3884 
3885 		/*
3886 		 * Run the appropriate command.
3887 		 */
3888 		if (find_command_idx(cmdname, &i) == 0) {
3889 			current_command = &command_table[i];
3890 			ret = command_table[i].func(argc - 1, argv + 1);
3891 		} else if (strchr(cmdname, '=') != NULL) {
3892 			verify(find_command_idx("set", &i) == 0);
3893 			current_command = &command_table[i];
3894 			ret = command_table[i].func(argc, argv);
3895 		} else {
3896 			(void) fprintf(stderr, gettext("unrecognized "
3897 			    "command '%s'\n"), cmdname);
3898 			usage(B_FALSE);
3899 		}
3900 	}
3901 
3902 	(void) fclose(mnttab_file);
3903 
3904 	libzfs_fini(g_zfs);
3905 
3906 	/*
3907 	 * The 'ZFS_ABORT' environment variable causes us to dump core on exit
3908 	 * for the purposes of running ::findleaks.
3909 	 */
3910 	if (getenv("ZFS_ABORT") != NULL) {
3911 		(void) printf("dumping core by request\n");
3912 		abort();
3913 	}
3914 
3915 	return (ret);
3916 }
3917