xref: /titanic_50/usr/src/cmd/ssh/sshd/auth2.c (revision d7ddd43c70ebe97a1118be9f663a54d0d1d89fe6)
1 /*
2  * Copyright (c) 2000 Markus Friedl.  All rights reserved.
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  */
24 /*
25  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
26  * Use is subject to license terms.
27  */
28 
29 #include "includes.h"
30 RCSID("$OpenBSD: auth2.c,v 1.95 2002/08/22 21:33:58 markus Exp $");
31 
32 #include "ssh2.h"
33 #include "xmalloc.h"
34 #include "packet.h"
35 #include "log.h"
36 #include "servconf.h"
37 #include "compat.h"
38 #include "misc.h"
39 #include "auth.h"
40 #include "dispatch.h"
41 #include "sshlogin.h"
42 #include "pathnames.h"
43 
44 #ifdef HAVE_BSM
45 #include "bsmaudit.h"
46 extern adt_session_data_t *ah;
47 #endif /* HAVE_BSM */
48 
49 #ifdef GSSAPI
50 #include "ssh-gss.h"
51 #endif
52 
53 /* import */
54 extern ServerOptions options;
55 extern u_char *session_id2;
56 extern int session_id2_len;
57 
58 Authctxt *x_authctxt = NULL;
59 
60 /* methods */
61 
62 extern Authmethod method_none;
63 extern Authmethod method_pubkey;
64 extern Authmethod method_passwd;
65 extern Authmethod method_kbdint;
66 extern Authmethod method_hostbased;
67 extern Authmethod method_external;
68 extern Authmethod method_gssapi;
69 
70 static Authmethod *authmethods[] = {
71 	&method_none,
72 #ifdef GSSAPI
73 	&method_external,
74 	&method_gssapi,
75 #endif
76 	&method_pubkey,
77 	&method_passwd,
78 	&method_kbdint,
79 	&method_hostbased,
80 	NULL
81 };
82 
83 /* protocol */
84 
85 static void input_service_request(int, u_int32_t, void *);
86 static void input_userauth_request(int, u_int32_t, void *);
87 
88 /* helper */
89 static Authmethod *authmethod_lookup(const char *);
90 static char *authmethods_get(void);
91 static char *authmethods_check_abandonment(Authctxt *authctxt,
92 					  Authmethod *method);
93 static void  authmethod_count_attempt(Authmethod *method);
94 /*static char *authmethods_get_kbdint(void);*/
95 int user_key_allowed(struct passwd *, Key *);
96 int hostbased_key_allowed(struct passwd *, const char *, char *, Key *);
97 static int   userauth_method_can_run(Authmethod *method);
98 static void  userauth_reset_methods(void);
99 
100 /*
101  * loop until authctxt->success == TRUE
102  */
103 
104 Authctxt *
105 do_authentication2(void)
106 {
107 	Authctxt *authctxt = authctxt_new();
108 
109 	x_authctxt = authctxt;		/*XXX*/
110 
111 #ifdef HAVE_BSM
112 	fatal_add_cleanup(audit_failed_login_cleanup, authctxt);
113 #endif /* HAVE_BSM */
114 
115 	/* challenge-response is implemented via keyboard interactive */
116 	if (options.challenge_response_authentication)
117 		options.kbd_interactive_authentication = 1;
118 	if (options.pam_authentication_via_kbd_int)
119 		options.kbd_interactive_authentication = 1;
120 
121 	dispatch_init(&dispatch_protocol_error);
122 	dispatch_set(SSH2_MSG_SERVICE_REQUEST, &input_service_request);
123 	dispatch_run(DISPATCH_BLOCK, &authctxt->success, authctxt);
124 
125 	return (authctxt);
126 }
127 
128 static void
129 input_service_request(int type, u_int32_t seq, void *ctxt)
130 {
131 	Authctxt *authctxt = ctxt;
132 	u_int len;
133 	int acceptit = 0;
134 	char *service = packet_get_string(&len);
135 	packet_check_eom();
136 
137 	if (authctxt == NULL)
138 		fatal("input_service_request: no authctxt");
139 
140 	if (strcmp(service, "ssh-userauth") == 0) {
141 		if (!authctxt->success) {
142 			acceptit = 1;
143 			/* now we can handle user-auth requests */
144 			dispatch_set(SSH2_MSG_USERAUTH_REQUEST, &input_userauth_request);
145 		}
146 	}
147 	/* XXX all other service requests are denied */
148 
149 	if (acceptit) {
150 		packet_start(SSH2_MSG_SERVICE_ACCEPT);
151 		packet_put_cstring(service);
152 		packet_send();
153 		packet_write_wait();
154 	} else {
155 		debug("bad service request %s", service);
156 		packet_disconnect("bad service request %s", service);
157 	}
158 	xfree(service);
159 }
160 
161 static void
162 input_userauth_request(int type, u_int32_t seq, void *ctxt)
163 {
164 	Authctxt *authctxt = ctxt;
165 	Authmethod *m = NULL;
166 	char *user, *service, *method, *style = NULL;
167 
168 	if (authctxt == NULL)
169 		fatal("input_userauth_request: no authctxt");
170 
171 	user = packet_get_string(NULL);
172 	service = packet_get_string(NULL);
173 	method = packet_get_string(NULL);
174 	debug("userauth-request for user %s service %s method %s", user,
175 		service, method);
176 	debug("attempt %d initial attempt %d failures %d initial failures %d",
177 		authctxt->attempt, authctxt->init_attempt,
178 		authctxt->failures, authctxt->init_failures);
179 
180 	m = authmethod_lookup(method);
181 
182 	if ((style = strchr(user, ':')) != NULL)
183 		*style++ = 0;
184 
185 	authctxt->attempt++;
186 	if (m != NULL && m->is_initial)
187 		authctxt->init_attempt++;
188 
189 	if (authctxt->attempt == 1) {
190 		/* setup auth context */
191 		authctxt->pw = getpwnamallow(user);
192 		/* May want to abstract SSHv2 services someday */
193 		if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
194 			/* enforced in userauth_finish() below */
195 			authctxt->valid = 1;
196 			debug2("input_userauth_request: setting up authctxt for %s", user);
197 		} else {
198 			log("input_userauth_request: illegal user %s", user);
199 		}
200 		setproctitle("%s", authctxt->pw ? user : "unknown");
201 		authctxt->user = xstrdup(user);
202 		authctxt->service = xstrdup(service);
203 		authctxt->style = style ? xstrdup(style) : NULL;
204 		userauth_reset_methods();
205 	} else {
206 		char *abandoned;
207 
208 		/*
209 		 * Check for abandoned [multi-round-trip] userauths
210 		 * methods (e.g., kbdint).  Userauth method abandonment
211 		 * should be treated as userauth method failure and
212 		 * counted against max_auth_tries.
213 		 */
214 		abandoned = authmethods_check_abandonment(authctxt, m);
215 
216 		if (abandoned != NULL &&
217 		    authctxt->failures > options.max_auth_tries) {
218 			/* userauth_finish() will now packet_disconnect() */
219 			userauth_finish(authctxt, abandoned);
220 			/* NOTREACHED */
221 		}
222 
223 		/* Handle user|service changes, possibly packet_disconnect() */
224 		userauth_user_svc_change(authctxt, user, service);
225 	}
226 
227 	authctxt->method = m;
228 
229 	/* run userauth method, try to authenticate user */
230 	if (m != NULL && userauth_method_can_run(m)) {
231 		debug2("input_userauth_request: try method %s", method);
232 
233 		m->postponed = 0;
234 		m->abandoned = 0;
235 		m->authenticated = 0;
236 
237 		if (!m->is_initial ||
238 		    authctxt->init_failures < options.max_init_auth_tries)
239 			m->userauth(authctxt);
240 
241 		authmethod_count_attempt(m);
242 
243 		if (authctxt->unwind_dispatch_loop) {
244 			/*
245 			 * Method ran nested dispatch loop but was
246 			 * abandoned.  Cleanup and return without doing
247 			 * anything else; we're just unwinding the stack.
248 			 */
249 			authctxt->unwind_dispatch_loop = 0;
250 			goto done;
251 		}
252 
253 		if (m->postponed)
254 			goto done; /* multi-round trip userauth not finished */
255 
256 		if (m->abandoned) {
257 			/* multi-round trip userauth abandoned, log failure */
258 			auth_log(authctxt, 0, method, " ssh2");
259 			goto done;
260 		}
261 	}
262 
263 	userauth_finish(authctxt, method);
264 
265 done:
266 	xfree(service);
267 	xfree(user);
268 	xfree(method);
269 }
270 
271 void
272 userauth_finish(Authctxt *authctxt, char *method)
273 {
274 	int authenticated, partial;
275 
276 	if (authctxt == NULL)
277 		fatal("%s: missing context", __func__);
278 
279 	/* unknown method handling -- must elicit userauth failure msg */
280 	if (authctxt->method == NULL) {
281 		authenticated = 0;
282 		partial = 0;
283 		goto done_checking;
284 	}
285 
286 #ifndef USE_PAM
287 	/* Special handling for root (done elsewhere for PAM) */
288 	if (authctxt->method->authenticated &&
289 	    authctxt->pw != NULL && authctxt->pw->pw_uid == 0 &&
290 	    !auth_root_allowed(method))
291 		authctxt->method->authenticated = 0;
292 #endif /* USE_PAM */
293 
294 #ifdef _UNICOS
295 	if (authctxt->method->authenticated &&
296 	    cray_access_denied(authctxt->user)) {
297 		authctxt->method->authenticated = 0;
298 		fatal("Access denied for user %s.",authctxt->user);
299 	}
300 #endif /* _UNICOS */
301 
302 	partial = userauth_check_partial_failure(authctxt);
303 	authenticated = authctxt->method->authenticated;
304 
305 #ifdef USE_PAM
306 	/*
307 	 * If the userauth method failed to complete PAM work then force
308 	 * partial failure.
309 	 */
310 	if (authenticated && !AUTHPAM_DONE(authctxt))
311 		partial = 1;
312 #endif /* USE_PAM */
313 
314 	/*
315 	 * To properly support invalid userauth method names we set
316 	 * authenticated=0, partial=0 above and know that
317 	 * authctxt->method == NULL.
318 	 *
319 	 * No unguarded reference to authctxt->method allowed from here.
320 	 * Checking authenticated != 0 is a valid guard; authctxt->method
321 	 * MUST NOT be NULL if authenticated.
322 	 */
323 done_checking:
324 	if (!authctxt->valid && authenticated) {
325 		/*
326 		 * Should never happen -- if it does PAM's at fault
327 		 * but we need not panic, just treat as a failure.
328 		 */
329 		authctxt->method->authenticated = 0;
330 		authenticated = 0;
331 		log("Ignoring authenticated invalid user %s",
332 		    authctxt->user);
333 		auth_log(authctxt, 0, method, " ssh2");
334 	}
335 
336 	/* Log before sending the reply */
337 	auth_log(authctxt, authenticated, method, " ssh2");
338 
339 	if (authenticated && !partial) {
340 
341 		/* turn off userauth */
342 		dispatch_set(SSH2_MSG_USERAUTH_REQUEST, &dispatch_protocol_ignore);
343 		packet_start(SSH2_MSG_USERAUTH_SUCCESS);
344 		packet_send();
345 		packet_write_wait();
346 		/* now we can break out */
347 		authctxt->success = 1;
348 	} else {
349 		char *methods;
350 
351 		if (authctxt->method && authctxt->method->is_initial)
352 			authctxt->init_failures++;
353 
354 		authctxt->method = NULL;
355 
356 #ifdef USE_PAM
357 		/*
358 		 * Keep track of last PAM error (or PERM_DENIED) for BSM
359 		 * login failure auditing, which may run after the PAM
360 		 * state has been cleaned up.
361 		 */
362 		authctxt->pam_retval = AUTHPAM_ERROR(authctxt, PAM_PERM_DENIED);
363 #endif /* USE_PAM */
364 
365 		if (authctxt->failures++ > options.max_auth_tries) {
366 #ifdef HAVE_BSM
367 			fatal_remove_cleanup(audit_failed_login_cleanup,
368 				authctxt);
369 			audit_sshd_login_failure(&ah, PAM_MAXTRIES,
370 			    authctxt->user);
371 #endif /* HAVE_BSM */
372 			packet_disconnect(AUTH_FAIL_MSG, authctxt->user);
373 		}
374 
375 #ifdef _UNICOS
376 		if (strcmp(method, "password") == 0)
377 			cray_login_failure(authctxt->user, IA_UDBERR);
378 #endif /* _UNICOS */
379 		packet_start(SSH2_MSG_USERAUTH_FAILURE);
380 
381 		/*
382 		 * If (partial) then authmethods_get() will return only
383 		 * required methods, likely only "keyboard-interactive;"
384 		 * (methods == NULL) implies failure, even if (partial == 1)
385 		 */
386 		methods = authmethods_get();
387 		packet_put_cstring(methods);
388 		packet_put_char((authenticated && partial && methods) ? 1 : 0);
389 		if (methods)
390 			xfree(methods);
391 		packet_send();
392 		packet_write_wait();
393 	}
394 }
395 
396 /* get current user */
397 
398 struct passwd*
399 auth_get_user(void)
400 {
401 	return (x_authctxt != NULL && x_authctxt->valid) ? x_authctxt->pw : NULL;
402 }
403 
404 #define	DELIM	","
405 
406 #if 0
407 static char *
408 authmethods_get_kbdint(void)
409 {
410 	Buffer b;
411 	int i;
412 
413 	for (i = 0; authmethods[i] != NULL; i++) {
414 		if (strcmp(authmethods[i]->name, "keyboard-interactive") != 0)
415 			continue;
416 		return xstrdup(authmethods[i]->name);
417 	}
418 	return NULL;
419 }
420 #endif
421 
422 void
423 userauth_user_svc_change(Authctxt *authctxt, char *user, char *service)
424 {
425 	/*
426 	 * NOTE:
427 	 *
428 	 * SSHv2 services should be abstracted and service changes during
429 	 * userauth should be supported as per the userauth draft.  In the PAM
430 	 * case, support for multiple SSHv2 services means that we have to
431 	 * format the PAM service name according to the SSHv2 service *and* the
432 	 * SSHv2 userauth being attempted ("passwd", "kbdint" and "other").
433 	 *
434 	 * We'll cross that bridge when we come to it.  For now disallow service
435 	 * changes during userauth if using PAM, but allow username changes.
436 	 */
437 
438 	/* authctxt->service must == ssh-connection here */
439 	if (service != NULL && strcmp(service, authctxt->service) != 0) {
440 		packet_disconnect("Change of service not "
441 				  "allowed: %s and %s",
442 				  authctxt->service, service);
443 	}
444 	if (user != NULL && authctxt->user != NULL &&
445 	    strcmp(user, authctxt->user) == 0)
446 		return;
447 
448 	/* All good; update authctxt */
449 	xfree(authctxt->user);
450 	authctxt->user = xstrdup(user);
451 	pwfree(&authctxt->pw);
452 	authctxt->pw = getpwnamallow(user);
453 	authctxt->valid = (authctxt->pw != NULL);
454 
455 	/* Forget method state; abandon postponed userauths */
456 	userauth_reset_methods();
457 }
458 
459 int
460 userauth_check_partial_failure(Authctxt *authctxt)
461 {
462 	int i;
463 	int required = 0;
464 	int sufficient = 0;
465 
466 	/*
467 	 * v1 does not set authctxt->method
468 	 * partial userauth failure is a v2 concept
469 	 */
470 	if (authctxt->method == NULL)
471 		return 0;
472 
473 	for (i = 0; authmethods[i] != NULL; i++) {
474 		if (authmethods[i]->required)
475 			required++;
476 		if (authmethods[i]->sufficient)
477 			sufficient++;
478 	}
479 
480 	if (required == 0 && sufficient == 0)
481 		return !authctxt->method->authenticated;
482 
483 	if (required == 1 && authctxt->method->required)
484 		return !authctxt->method->authenticated;
485 
486 	if (sufficient && authctxt->method->sufficient)
487 		return !authctxt->method->authenticated;
488 
489 	return 1;
490 }
491 
492 int
493 userauth_method_can_run(Authmethod *method)
494 {
495 	if (method->not_again)
496 		return 0;
497 
498 	return 1;
499 }
500 
501 static
502 void
503 userauth_reset_methods(void)
504 {
505 	int i;
506 
507 	for (i = 0; authmethods[i] != NULL; i++) {
508 		/* note: counters not reset */
509 		authmethods[i]->required = 0;
510 		authmethods[i]->sufficient = 0;
511 		authmethods[i]->authenticated = 0;
512 		authmethods[i]->not_again = 0;
513 		authmethods[i]->postponed = 0;
514 		authmethods[i]->abandoned = 0;
515 	}
516 }
517 
518 void
519 userauth_force_kbdint(void)
520 {
521 	int i;
522 
523 	for (i = 0; authmethods[i] != NULL; i++) {
524 		authmethods[i]->required = 0;
525 		authmethods[i]->sufficient = 0;
526 	}
527 	method_kbdint.required = 1;
528 }
529 
530 /*
531  * Check to see if a previously run multi-round trip userauth method has
532  * been abandoned and call its cleanup function.
533  *
534  * Abandoned userauth method invocations are counted as userauth failures.
535  */
536 static
537 char *
538 authmethods_check_abandonment(Authctxt *authctxt, Authmethod *method)
539 {
540 	int i;
541 
542 	/* optimization: check current method first */
543 	if (method && method->postponed) {
544 		method->postponed = 0;
545 		if (method->abandon)
546 			method->abandon(authctxt, method);
547 		else
548 			method->abandons++;
549 		authctxt->failures++; /* abandonment -> failure */
550 		if (method->is_initial)
551 			authctxt->init_failures++;
552 
553 		/*
554 		 * Since we check for abandonment whenever a userauth is
555 		 * requested we know only one method could have been
556 		 * in postponed state, so we can return now.
557 		 */
558 		return (method->name);
559 	}
560 	for (i = 0; authmethods[i] != NULL; i++) {
561 		if (!authmethods[i]->postponed)
562 			continue;
563 
564 		/* some method was postponed and a diff one is being started */
565 		if (method != authmethods[i]) {
566 			authmethods[i]->postponed = 0;
567 			if (authmethods[i]->abandon)
568 				authmethods[i]->abandon(authctxt,
569 							authmethods[i]);
570 			else
571 				authmethods[i]->abandons++;
572 			authctxt->failures++;
573 			if (authmethods[i]->is_initial)
574 				authctxt->init_failures++;
575 			return (authmethods[i]->name); /* see above */
576 		}
577 	}
578 
579 	return NULL;
580 }
581 
582 static char *
583 authmethods_get(void)
584 {
585 	Buffer b;
586 	char *list;
587 	int i;
588 	int sufficient = 0;
589 	int required = 0;
590 	int authenticated = 0;
591 	int partial = 0;
592 
593 	/*
594 	 * If at least one method succeeded partially then at least one
595 	 * authmethod will be required and only required methods should
596 	 * continue.
597 	 */
598 	for (i = 0; authmethods[i] != NULL; i++) {
599 		if (authmethods[i]->authenticated)
600 			authenticated++;
601 		if (authmethods[i]->required)
602 			required++;
603 		if (authmethods[i]->sufficient)
604 			sufficient++;
605 	}
606 
607 	partial = (required + sufficient) > 0;
608 
609 	buffer_init(&b);
610 	for (i = 0; authmethods[i] != NULL; i++) {
611 		if (strcmp(authmethods[i]->name, "none") == 0)
612 			continue;
613 		if (required && !authmethods[i]->required)
614 			continue;
615 		if (sufficient && !required && !authmethods[i]->sufficient)
616 			continue;
617 		if (authmethods[i]->not_again)
618 			continue;
619 
620 		if (authmethods[i]->required) {
621 			if (buffer_len(&b) > 0)
622 				buffer_append(&b, ",", 1);
623 			buffer_append(&b, authmethods[i]->name,
624 			    strlen(authmethods[i]->name));
625 			continue;
626 		}
627 
628 		/*
629 		 * A method can be enabled (marked sufficient)
630 		 * dynamically provided that at least one other method
631 		 * has succeeded partially.
632 		 */
633 		if ((partial && authmethods[i]->sufficient) ||
634 		    (authmethods[i]->enabled != NULL &&
635 		    *(authmethods[i]->enabled) != 0)) {
636 			if (buffer_len(&b) > 0)
637 				buffer_append(&b, ",", 1);
638 			buffer_append(&b, authmethods[i]->name,
639 			    strlen(authmethods[i]->name));
640 		}
641 	}
642 	buffer_append(&b, "\0", 1);
643 	list = xstrdup(buffer_ptr(&b));
644 	buffer_free(&b);
645 	return list;
646 }
647 
648 static Authmethod *
649 authmethod_lookup(const char *name)
650 {
651 	int i;
652 
653 	/*
654 	 * Method must be sufficient, required or enabled and must not
655 	 * be marked as not able to run again
656 	 */
657 	if (name != NULL)
658 		for (i = 0; authmethods[i] != NULL; i++)
659 			if (((authmethods[i]->sufficient ||
660 			      authmethods[i]->required) ||
661 			     (authmethods[i]->enabled != NULL &&
662 			      *(authmethods[i]->enabled) != 0)) &&
663 			    !authmethods[i]->not_again &&
664 			    strcmp(name, authmethods[i]->name) == 0)
665 				return authmethods[i];
666 	debug2("Unrecognized authentication method name: %s",
667 	    name ? name : "NULL");
668 	return NULL;
669 }
670 
671 static void
672 authmethod_count_attempt(Authmethod *method)
673 {
674 	if (!method)
675 		fatal("Internal error in authmethod_count_attempt()");
676 
677 	if (method->postponed)
678 		return;
679 
680 	method->attempts++;
681 
682 	if (method->abandoned)
683 		method->abandons++;
684 	else if (method->authenticated)
685 		method->successes++;
686 	else
687 		method->failures++;
688 
689 	return;
690 }
691