1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 /* 27 * This file contains miscellaneous routines. 28 */ 29 #include "global.h" 30 31 #include <stdlib.h> 32 #include <signal.h> 33 #include <malloc.h> 34 #include <unistd.h> 35 #include <string.h> 36 #include <errno.h> 37 #include <fcntl.h> 38 #include <sys/ioctl.h> 39 #include <sys/fcntl.h> 40 #include <sys/time.h> 41 #include <ctype.h> 42 #include <termio.h> 43 #include "misc.h" 44 #include "analyze.h" 45 #include "label.h" 46 #include "startup.h" 47 48 #ifdef __STDC__ 49 50 /* Function prototypes for ANSI C Compilers */ 51 static void cleanup(int sig); 52 53 #else /* __STDC__ */ 54 55 /* Function prototypes for non-ANSI C Compilers */ 56 static void cleanup(); 57 58 #endif /* __STDC__ */ 59 60 struct env *current_env = NULL; /* ptr to current environment */ 61 static int stop_pending = 0; /* ctrl-Z is pending */ 62 struct ttystate ttystate; /* tty info */ 63 static int aborting = 0; /* in process of aborting */ 64 65 /* 66 * For 4.x, limit the choices of valid disk names to this set. 67 */ 68 static char *disk_4x_identifiers[] = { "sd", "id"}; 69 #define N_DISK_4X_IDS (sizeof (disk_4x_identifiers)/sizeof (char *)) 70 71 72 /* 73 * This is the list of legal inputs for all yes/no questions. 74 */ 75 char *confirm_list[] = { 76 "yes", 77 "no", 78 NULL, 79 }; 80 81 /* 82 * This routine is a wrapper for malloc. It allocates pre-zeroed space, 83 * and checks the return value so the caller doesn't have to. 84 */ 85 void * 86 zalloc(count) 87 int count; 88 { 89 void *ptr; 90 91 if ((ptr = (void *) calloc(1, (unsigned)count)) == NULL) { 92 err_print("Error: unable to calloc more space.\n"); 93 fullabort(); 94 } 95 return (ptr); 96 } 97 98 /* 99 * This routine is a wrapper for realloc. It reallocates the given 100 * space, and checks the return value so the caller doesn't have to. 101 * Note that the any space added by this call is NOT necessarily 102 * zeroed. 103 */ 104 void * 105 rezalloc(ptr, count) 106 void *ptr; 107 int count; 108 { 109 void *new_ptr; 110 111 112 if ((new_ptr = (void *) realloc((char *)ptr, 113 (unsigned)count)) == NULL) { 114 err_print("Error: unable to realloc more space.\n"); 115 fullabort(); 116 } 117 return (new_ptr); 118 } 119 120 /* 121 * This routine is a wrapper for free. 122 */ 123 void 124 destroy_data(data) 125 char *data; 126 { 127 free((char *)data); 128 } 129 130 #ifdef not 131 /* 132 * This routine takes the space number returned by an ioctl call and 133 * returns a mnemonic name for that space. 134 */ 135 char * 136 space2str(space) 137 uint_t space; 138 { 139 char *name; 140 141 switch (space&SP_BUSMASK) { 142 case SP_VIRTUAL: 143 name = "virtual"; 144 break; 145 case SP_OBMEM: 146 name = "obmem"; 147 break; 148 case SP_OBIO: 149 name = "obio"; 150 break; 151 case SP_MBMEM: 152 name = "mbmem"; 153 break; 154 case SP_MBIO: 155 name = "mbio"; 156 break; 157 default: 158 err_print("Error: unknown address space type encountered.\n"); 159 fullabort(); 160 } 161 return (name); 162 } 163 #endif /* not */ 164 165 /* 166 * This routine asks the user the given yes/no question and returns 167 * the response. 168 */ 169 int 170 check(question) 171 char *question; 172 { 173 int answer; 174 u_ioparam_t ioparam; 175 176 /* 177 * If we are running out of a command file, assume a yes answer. 178 */ 179 if (option_f) 180 return (0); 181 /* 182 * Ask the user. 183 */ 184 ioparam.io_charlist = confirm_list; 185 answer = input(FIO_MSTR, question, '?', &ioparam, 186 (int *)NULL, DATA_INPUT); 187 return (answer); 188 } 189 190 /* 191 * This routine aborts the current command. It is called by a ctrl-C 192 * interrupt and also under certain error conditions. 193 */ 194 /*ARGSUSED*/ 195 void 196 cmdabort(sig) 197 int sig; 198 { 199 200 /* 201 * If there is no usable saved environment, gracefully exit. This 202 * allows the user to interrupt the program even when input is from 203 * a file, or if there is no current menu, like at the "Select disk:" 204 * prompt. 205 */ 206 if (current_env == NULL || !(current_env->flags & ENV_USE)) 207 fullabort(); 208 209 /* 210 * If we are in a critical zone, note the attempt and return. 211 */ 212 if (current_env->flags & ENV_CRITICAL) { 213 current_env->flags |= ENV_ABORT; 214 return; 215 } 216 /* 217 * All interruptions when we are running out of a command file 218 * cause the program to gracefully exit. 219 */ 220 if (option_f) 221 fullabort(); 222 fmt_print("\n"); 223 /* 224 * Clean up any state left by the interrupted command. 225 */ 226 cleanup(sig); 227 /* 228 * Jump to the saved environment. 229 */ 230 longjmp(current_env->env, 0); 231 } 232 233 /* 234 * This routine implements the ctrl-Z suspend mechanism. It is called 235 * when a suspend signal is received. 236 */ 237 /*ARGSUSED*/ 238 void 239 onsusp(sig) 240 int sig; 241 { 242 int fix_term; 243 #ifdef NOT_DEF 244 sigset_t sigmask; 245 #endif /* NOT_DEF */ 246 247 /* 248 * If we are in a critical zone, note the attempt and return. 249 */ 250 if (current_env != NULL && current_env->flags & ENV_CRITICAL) { 251 stop_pending = 1; 252 return; 253 } 254 /* 255 * If the terminal is mucked up, note that we will need to 256 * re-muck it when we start up again. 257 */ 258 fix_term = ttystate.ttyflags; 259 fmt_print("\n"); 260 /* 261 * Clean up any state left by the interrupted command. 262 */ 263 cleanup(sig); 264 #ifdef NOT_DEF 265 /* Investigate whether all this is necessary */ 266 /* 267 * Stop intercepting the suspend signal, then send ourselves one 268 * to cause us to stop. 269 */ 270 sigmask.sigbits[0] = (ulong_t)0xffffffff; 271 if (sigprocmask(SIG_SETMASK, &sigmask, (sigset_t *)NULL) == -1) 272 err_print("sigprocmask failed %d\n", errno); 273 #endif /* NOT_DEF */ 274 (void) signal(SIGTSTP, SIG_DFL); 275 (void) kill(0, SIGTSTP); 276 /* 277 * PC stops here 278 */ 279 /* 280 * We are started again. Set us up to intercept the suspend 281 * signal once again. 282 */ 283 (void) signal(SIGTSTP, onsusp); 284 /* 285 * Re-muck the terminal if necessary. 286 */ 287 if (fix_term & TTY_ECHO_OFF) 288 echo_off(); 289 if (fix_term & TTY_CBREAK_ON) 290 charmode_on(); 291 } 292 293 /* 294 * This routine implements the timing function used during long-term 295 * disk operations (e.g. formatting). It is called when an alarm signal 296 * is received. 297 */ 298 /*ARGSUSED*/ 299 void 300 onalarm(sig) 301 int sig; 302 { 303 } 304 305 306 /* 307 * This routine gracefully exits the program. 308 */ 309 void 310 fullabort() 311 { 312 313 fmt_print("\n"); 314 /* 315 * Clean up any state left by an interrupted command. 316 * Avoid infinite loops caused by a clean-up 317 * routine failing again... 318 */ 319 if (!aborting) { 320 aborting = 1; 321 cleanup(SIGKILL); 322 } 323 exit(1); 324 /*NOTREACHED*/ 325 } 326 327 /* 328 * This routine cleans up the state of the world. It is a hodge-podge 329 * of kludges to allow us to interrupt commands whenever possible. 330 * 331 * Some cleanup actions may depend on the type of signal. 332 */ 333 static void 334 cleanup(int sig) 335 { 336 337 /* 338 * Lock out interrupts to avoid recursion. 339 */ 340 enter_critical(); 341 /* 342 * Fix up the tty if necessary. 343 */ 344 if (ttystate.ttyflags & TTY_CBREAK_ON) { 345 charmode_off(); 346 } 347 if (ttystate.ttyflags & TTY_ECHO_OFF) { 348 echo_on(); 349 } 350 351 /* 352 * If the defect list is dirty, write it out. 353 */ 354 if (cur_list.flags & LIST_DIRTY) { 355 cur_list.flags = 0; 356 if (!EMBEDDED_SCSI) 357 write_deflist(&cur_list); 358 } 359 /* 360 * If the label is dirty, write it out. 361 */ 362 if (cur_flags & LABEL_DIRTY) { 363 cur_flags &= ~LABEL_DIRTY; 364 (void) write_label(); 365 } 366 /* 367 * If we are logging and just interrupted a scan, print out 368 * some summary info to the log file. 369 */ 370 if (log_file && scan_cur_block >= 0) { 371 pr_dblock(log_print, scan_cur_block); 372 log_print("\n"); 373 } 374 if (scan_blocks_fixed >= 0) 375 fmt_print("Total of %lld defective blocks repaired.\n", 376 scan_blocks_fixed); 377 if (sig != SIGSTOP) { /* Don't reset on suspend (converted to stop) */ 378 scan_cur_block = scan_blocks_fixed = -1; 379 } 380 exit_critical(); 381 } 382 383 /* 384 * This routine causes the program to enter a critical zone. Within the 385 * critical zone, no interrupts are allowed. Note that calls to this 386 * routine for the same environment do NOT nest, so there is not 387 * necessarily pairing between calls to enter_critical() and exit_critical(). 388 */ 389 void 390 enter_critical() 391 { 392 393 /* 394 * If there is no saved environment, interrupts will be ignored. 395 */ 396 if (current_env == NULL) 397 return; 398 /* 399 * Mark the environment to be in a critical zone. 400 */ 401 current_env->flags |= ENV_CRITICAL; 402 } 403 404 /* 405 * This routine causes the program to exit a critical zone. Note that 406 * calls to enter_critical() for the same environment do NOT nest, so 407 * one call to exit_critical() will erase any number of such calls. 408 */ 409 void 410 exit_critical() 411 { 412 413 /* 414 * If there is a saved environment, mark it to be non-critical. 415 */ 416 if (current_env != NULL) 417 current_env->flags &= ~ENV_CRITICAL; 418 /* 419 * If there is a stop pending, execute the stop. 420 */ 421 if (stop_pending) { 422 stop_pending = 0; 423 onsusp(SIGSTOP); 424 } 425 /* 426 * If there is an abort pending, execute the abort. 427 */ 428 if (current_env == NULL) 429 return; 430 if (current_env->flags & ENV_ABORT) { 431 current_env->flags &= ~ENV_ABORT; 432 cmdabort(SIGINT); 433 } 434 } 435 436 /* 437 * This routine turns off echoing on the controlling tty for the program. 438 */ 439 void 440 echo_off() 441 { 442 /* 443 * Open the tty and store the file pointer for later. 444 */ 445 if (ttystate.ttyflags == 0) { 446 if ((ttystate.ttyfile = open("/dev/tty", 447 O_RDWR | O_NDELAY)) < 0) { 448 err_print("Unable to open /dev/tty.\n"); 449 fullabort(); 450 } 451 } 452 /* 453 * Get the parameters for the tty, turn off echoing and set them. 454 */ 455 if (tcgetattr(ttystate.ttyfile, &ttystate.ttystate) < 0) { 456 err_print("Unable to get tty parameters.\n"); 457 fullabort(); 458 } 459 ttystate.ttystate.c_lflag &= ~ECHO; 460 if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { 461 err_print("Unable to set tty to echo off state.\n"); 462 fullabort(); 463 } 464 465 /* 466 * Remember that we've successfully turned 467 * ECHO mode off, so we know to fix it later. 468 */ 469 ttystate.ttyflags |= TTY_ECHO_OFF; 470 } 471 472 /* 473 * This routine turns on echoing on the controlling tty for the program. 474 */ 475 void 476 echo_on() 477 { 478 479 /* 480 * Using the saved parameters, turn echoing on and set them. 481 */ 482 ttystate.ttystate.c_lflag |= ECHO; 483 if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { 484 err_print("Unable to set tty to echo on state.\n"); 485 fullabort(); 486 } 487 /* 488 * Close the tty and mark it ok again. 489 */ 490 ttystate.ttyflags &= ~TTY_ECHO_OFF; 491 if (ttystate.ttyflags == 0) { 492 (void) close(ttystate.ttyfile); 493 } 494 } 495 496 /* 497 * This routine turns off single character entry mode for tty. 498 */ 499 void 500 charmode_on() 501 { 502 503 /* 504 * If tty unopened, open the tty and store the file pointer for later. 505 */ 506 if (ttystate.ttyflags == 0) { 507 if ((ttystate.ttyfile = open("/dev/tty", 508 O_RDWR | O_NDELAY)) < 0) { 509 err_print("Unable to open /dev/tty.\n"); 510 fullabort(); 511 } 512 } 513 /* 514 * Get the parameters for the tty, turn on char mode. 515 */ 516 if (tcgetattr(ttystate.ttyfile, &ttystate.ttystate) < 0) { 517 err_print("Unable to get tty parameters.\n"); 518 fullabort(); 519 } 520 ttystate.vmin = ttystate.ttystate.c_cc[VMIN]; 521 ttystate.vtime = ttystate.ttystate.c_cc[VTIME]; 522 523 ttystate.ttystate.c_lflag &= ~ICANON; 524 ttystate.ttystate.c_cc[VMIN] = 1; 525 ttystate.ttystate.c_cc[VTIME] = 0; 526 527 if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { 528 err_print("Unable to set tty to cbreak on state.\n"); 529 fullabort(); 530 } 531 532 /* 533 * Remember that we've successfully turned 534 * CBREAK mode on, so we know to fix it later. 535 */ 536 ttystate.ttyflags |= TTY_CBREAK_ON; 537 } 538 539 /* 540 * This routine turns on single character entry mode for tty. 541 * Note, this routine must be called before echo_on. 542 */ 543 void 544 charmode_off() 545 { 546 547 /* 548 * Using the saved parameters, turn char mode on. 549 */ 550 ttystate.ttystate.c_lflag |= ICANON; 551 ttystate.ttystate.c_cc[VMIN] = ttystate.vmin; 552 ttystate.ttystate.c_cc[VTIME] = ttystate.vtime; 553 if (tcsetattr(ttystate.ttyfile, TCSANOW, &ttystate.ttystate) < 0) { 554 err_print("Unable to set tty to cbreak off state.\n"); 555 fullabort(); 556 } 557 /* 558 * Close the tty and mark it ok again. 559 */ 560 ttystate.ttyflags &= ~TTY_CBREAK_ON; 561 if (ttystate.ttyflags == 0) { 562 (void) close(ttystate.ttyfile); 563 } 564 } 565 566 567 /* 568 * Allocate space for and return a pointer to a string 569 * on the stack. If the string is null, create 570 * an empty string. 571 * Use destroy_data() to free when no longer used. 572 */ 573 char * 574 alloc_string(s) 575 char *s; 576 { 577 char *ns; 578 579 if (s == (char *)NULL) { 580 ns = (char *)zalloc(1); 581 } else { 582 ns = (char *)zalloc(strlen(s) + 1); 583 (void) strcpy(ns, s); 584 } 585 return (ns); 586 } 587 588 589 590 /* 591 * This function can be used to build up an array of strings 592 * dynamically, with a trailing NULL to terminate the list. 593 * 594 * Parameters: 595 * argvlist: a pointer to the base of the current list. 596 * does not have to be initialized. 597 * size: pointer to an integer, indicating the number 598 * of string installed in the list. Must be 599 * initialized to zero. 600 * alloc: pointer to an integer, indicating the amount 601 * of space allocated. Must be initialized to 602 * zero. For efficiency, we allocate the list 603 * in chunks and use it piece-by-piece. 604 * str: the string to be inserted in the list. 605 * A copy of the string is malloc'ed, and 606 * appended at the end of the list. 607 * Returns: 608 * a pointer to the possibly-moved argvlist. 609 * 610 * No attempt to made to free unused memory when the list is 611 * completed, although this would not be hard to do. For 612 * reasonably small lists, this should suffice. 613 */ 614 #define INITIAL_LISTSIZE 32 615 #define INCR_LISTSIZE 32 616 617 char ** 618 build_argvlist(argvlist, size, alloc, str) 619 char **argvlist; 620 int *size; 621 int *alloc; 622 char *str; 623 { 624 if (*size + 2 > *alloc) { 625 if (*alloc == 0) { 626 *alloc = INITIAL_LISTSIZE; 627 argvlist = (char **) 628 zalloc(sizeof (char *) * (*alloc)); 629 } else { 630 *alloc += INCR_LISTSIZE; 631 argvlist = (char **) 632 rezalloc((void *) argvlist, 633 sizeof (char *) * (*alloc)); 634 } 635 } 636 637 argvlist[*size] = alloc_string(str); 638 *size += 1; 639 argvlist[*size] = NULL; 640 641 return (argvlist); 642 } 643 644 645 /* 646 * Useful parsing macros 647 */ 648 #define must_be(s, c) if (*s++ != c) return (0) 649 #define skip_digits(s) while (isdigit(*s)) s++ 650 /* Parsing macro below is created to handle fabric devices which contains */ 651 /* upper hex digits like c2t210000203708B8CEd0s0. */ 652 /* To get the target id(tid) the digit and hex upper digit need to */ 653 /* be processed. */ 654 #define skip_digit_or_hexupper(s) while (isdigit(*s) || \ 655 (isxdigit(*s) && isupper(*s))) s++ 656 657 /* 658 * Return true if a device name matches the conventions 659 * for the particular system. 660 */ 661 int 662 conventional_name(char *name) 663 { 664 must_be(name, 'c'); 665 skip_digits(name); 666 if (*name == 't') { 667 name++; 668 skip_digit_or_hexupper(name); 669 } 670 must_be(name, 'd'); 671 skip_digits(name); 672 must_be(name, 's'); 673 skip_digits(name); 674 return (*name == 0); 675 } 676 677 /* 678 * Return true if a device name matches the intel physical name conventions 679 * for the particular system. 680 */ 681 int 682 fdisk_physical_name(char *name) 683 { 684 must_be(name, 'c'); 685 skip_digits(name); 686 if (*name == 't') { 687 name++; 688 skip_digit_or_hexupper(name); 689 } 690 must_be(name, 'd'); 691 skip_digits(name); 692 must_be(name, 'p'); 693 skip_digits(name); 694 return (*name == 0); 695 } 696 697 /* 698 * Return true if a device name matches the conventions 699 * for a "whole disk" name for the particular system. 700 * The name in this case must match exactly that which 701 * would appear in the device directory itself. 702 */ 703 int 704 whole_disk_name(name) 705 char *name; 706 { 707 must_be(name, 'c'); 708 skip_digits(name); 709 if (*name == 't') { 710 name++; 711 skip_digit_or_hexupper(name); 712 } 713 must_be(name, 'd'); 714 skip_digits(name); 715 must_be(name, 's'); 716 must_be(name, '2'); 717 return (*name == 0); 718 } 719 720 721 /* 722 * Return true if a name is in the internal canonical form 723 */ 724 int 725 canonical_name(name) 726 char *name; 727 { 728 must_be(name, 'c'); 729 skip_digits(name); 730 if (*name == 't') { 731 name++; 732 skip_digit_or_hexupper(name); 733 } 734 must_be(name, 'd'); 735 skip_digits(name); 736 return (*name == 0); 737 } 738 739 740 /* 741 * Return true if a name is in the internal canonical form for 4.x 742 * Used to support 4.x naming conventions under 5.0. 743 */ 744 int 745 canonical4x_name(name) 746 char *name; 747 { 748 char **p; 749 int i; 750 751 p = disk_4x_identifiers; 752 for (i = N_DISK_4X_IDS; i > 0; i--, p++) { 753 if (match_substr(name, *p)) { 754 name += strlen(*p); 755 break; 756 } 757 } 758 if (i == 0) 759 return (0); 760 skip_digits(name); 761 return (*name == 0); 762 } 763 764 765 /* 766 * Map a conventional name into the internal canonical form: 767 * 768 * /dev/rdsk/c0t0d0s0 -> c0t0d0 769 */ 770 void 771 canonicalize_name(dst, src) 772 char *dst; 773 char *src; 774 { 775 char *s; 776 777 /* 778 * Copy from the 'c' to the end to the destination string... 779 */ 780 s = strchr(src, 'c'); 781 if (s != NULL) { 782 (void) strcpy(dst, s); 783 /* 784 * Remove the trailing slice (partition) reference 785 */ 786 s = dst + strlen(dst) - 2; 787 if (*s == 's') { 788 *s = 0; 789 } 790 } else { 791 *dst = 0; /* be tolerant of garbage input */ 792 } 793 } 794 795 796 /* 797 * Return true if we find an occurance of s2 at the 798 * beginning of s1. We don't have to match all of 799 * s1, but we do have to match all of s2 800 */ 801 int 802 match_substr(s1, s2) 803 char *s1; 804 char *s2; 805 { 806 while (*s2 != 0) { 807 if (*s1++ != *s2++) 808 return (0); 809 } 810 811 return (1); 812 } 813 814 815 /* 816 * Dump a structure in hexadecimal, for diagnostic purposes 817 */ 818 #define BYTES_PER_LINE 16 819 820 void 821 dump(hdr, src, nbytes, format) 822 char *hdr; 823 caddr_t src; 824 int nbytes; 825 int format; 826 { 827 int i; 828 int n; 829 char *p; 830 char s[256]; 831 832 assert(format == HEX_ONLY || format == HEX_ASCII); 833 834 (void) strcpy(s, hdr); 835 for (p = s; *p; p++) { 836 *p = ' '; 837 } 838 839 p = hdr; 840 while (nbytes > 0) { 841 err_print("%s", p); 842 p = s; 843 n = min(nbytes, BYTES_PER_LINE); 844 for (i = 0; i < n; i++) { 845 err_print("%02x ", src[i] & 0xff); 846 } 847 if (format == HEX_ASCII) { 848 for (i = BYTES_PER_LINE-n; i > 0; i--) { 849 err_print(" "); 850 } 851 err_print(" "); 852 for (i = 0; i < n; i++) { 853 err_print("%c", 854 isprint(src[i]) ? src[i] : '.'); 855 } 856 } 857 err_print("\n"); 858 nbytes -= n; 859 src += n; 860 } 861 } 862 863 864 float 865 bn2mb(uint64_t nblks) 866 { 867 float n; 868 869 n = (float)nblks / 1024.0; 870 return ((n / 1024.0) * cur_blksz); 871 } 872 873 874 diskaddr_t 875 mb2bn(float mb) 876 { 877 diskaddr_t n; 878 879 n = (diskaddr_t)(mb * 1024.0 * (1024.0 / cur_blksz)); 880 return (n); 881 } 882 883 float 884 bn2gb(uint64_t nblks) 885 { 886 float n; 887 888 n = (float)nblks / (1024.0 * 1024.0); 889 return ((n/1024.0) * cur_blksz); 890 891 } 892 893 float 894 bn2tb(uint64_t nblks) 895 { 896 float n; 897 898 n = (float)nblks / (1024.0 * 1024.0 * 1024.0); 899 return ((n/1024.0) * cur_blksz); 900 } 901 902 diskaddr_t 903 gb2bn(float gb) 904 { 905 diskaddr_t n; 906 907 n = (diskaddr_t)(gb * 1024.0 * 1024.0 * (1024.0 / cur_blksz)); 908 return (n); 909 } 910 911 /* 912 * This routine finds out the number of lines (rows) in a terminal 913 * window. The default value of TTY_LINES is returned on error. 914 */ 915 int 916 get_tty_lines() 917 { 918 int tty_lines = TTY_LINES; 919 struct winsize winsize; 920 921 if ((option_f == (char *)NULL) && isatty(0) == 1 && isatty(1) == 1) { 922 /* 923 * We have a real terminal for std input and output 924 */ 925 winsize.ws_row = 0; 926 if (ioctl(1, TIOCGWINSZ, &winsize) == 0) { 927 if (winsize.ws_row > 2) { 928 /* 929 * Should be atleast 2 lines, for division 930 * by (tty_lines - 1, tty_lines - 2) to work. 931 */ 932 tty_lines = winsize.ws_row; 933 } 934 } 935 } 936 return (tty_lines); 937 } 938