1# 2# Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. 3# 4# CDDL HEADER START 5# 6# The contents of this file are subject to the terms of the 7# Common Development and Distribution License (the "License"). 8# You may not use this file except in compliance with the License. 9# 10# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 11# or http://www.opensolaris.org/os/licensing. 12# See the License for the specific language governing permissions 13# and limitations under the License. 14# 15# When distributing Covered Code, include this CDDL HEADER in each 16# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 17# If applicable, add the following below this CDDL HEADER, with the 18# fields enclosed by brackets "[]" replaced with your own identifying 19# information: Portions Copyright [yyyy] [name of copyright owner] 20# 21# CDDL HEADER END 22# 23# DO NOT EDIT -- this file is generated by the Event Registry. 24# 25# 26# code: STORAGE-8000-1Q 27# keys: fault.config.fan-fail 28# 29msgid "STORAGE-8000-1Q.type" 30msgstr "Fault" 31msgid "STORAGE-8000-1Q.severity" 32msgstr "Critical" 33msgid "STORAGE-8000-1Q.description" 34msgstr "The minimum number of required fan trays (3) were not detected.\n" 35msgid "STORAGE-8000-1Q.response" 36msgstr "The service required LED on the enclosure will be illuminated.\n" 37msgid "STORAGE-8000-1Q.impact" 38msgstr "The SAS fabric is down, and user data storage is unavailable until the configuration problem is resolved.\n" 39msgid "STORAGE-8000-1Q.action" 40msgstr "Check that the minimum required number of components are configured.\n" 41# 42# code: STORAGE-8000-24 43# keys: fault.config.psu-fail 44# 45msgid "STORAGE-8000-24.type" 46msgstr "Fault" 47msgid "STORAGE-8000-24.severity" 48msgstr "Critical" 49msgid "STORAGE-8000-24.description" 50msgstr "The minimum number of required power supplies (3) were not detected.\n" 51msgid "STORAGE-8000-24.response" 52msgstr "The service required LED on the enclosure will be illuminated.\n" 53msgid "STORAGE-8000-24.impact" 54msgstr "The SAS fabric is down, and user data storage is unavailable until the configuration problem is resolved.\n" 55msgid "STORAGE-8000-24.action" 56msgstr "Check that the minimum required number of components are configured.\n" 57# 58# code: STORAGE-8000-3R 59# keys: fault.device.controller.fail 60# 61msgid "STORAGE-8000-3R.type" 62msgstr "Fault" 63msgid "STORAGE-8000-3R.severity" 64msgstr "Major" 65msgid "STORAGE-8000-3R.description" 66msgstr "A Controller failed.\n" 67msgid "STORAGE-8000-3R.response" 68msgstr "The service required LED on the enclosure will be illuminated.\n" 69msgid "STORAGE-8000-3R.impact" 70msgstr "The SAS fabric may be in a degraded state.\n" 71msgid "STORAGE-8000-3R.action" 72msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 73# 74# code: STORAGE-8000-42 75# keys: fault.device.ethernet.fail 76# 77msgid "STORAGE-8000-42.type" 78msgstr "Fault" 79msgid "STORAGE-8000-42.severity" 80msgstr "Major" 81msgid "STORAGE-8000-42.description" 82msgstr "An ethernet device failed.\n" 83msgid "STORAGE-8000-42.response" 84msgstr "The service required LED on the enclosure will be illuminated.\n" 85msgid "STORAGE-8000-42.impact" 86msgstr "The SAS fabric may be in a degraded state. User data storage is still available.\n" 87msgid "STORAGE-8000-42.action" 88msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 89# 90# code: STORAGE-8000-5X 91# keys: fault.device.fan.fail 92# 93msgid "STORAGE-8000-5X.type" 94msgstr "Fault" 95msgid "STORAGE-8000-5X.severity" 96msgstr "Major" 97msgid "STORAGE-8000-5X.description" 98msgstr "A fan is no longer operating correctly.\n" 99msgid "STORAGE-8000-5X.response" 100msgstr "The service required LED on the enclosure will be illuminated.\n" 101msgid "STORAGE-8000-5X.impact" 102msgstr "The enclosure may be getting inadequate cooling. If the problem persists, components may overheat and the enclosure may shutdown.\n" 103msgid "STORAGE-8000-5X.action" 104msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 105# 106# code: STORAGE-8000-6E 107# keys: fault.device.psu.fail 108# 109msgid "STORAGE-8000-6E.type" 110msgstr "Fault" 111msgid "STORAGE-8000-6E.severity" 112msgstr "Major" 113msgid "STORAGE-8000-6E.description" 114msgstr "A power supply is no longer operating correctly.\n" 115msgid "STORAGE-8000-6E.response" 116msgstr "The service required LED on the enclosure will be illuminated.\n" 117msgid "STORAGE-8000-6E.impact" 118msgstr "The enclosure may not be getting adequate power. Subsequent loss of power supplies may cause the enclosure to shutdown.\n" 119msgid "STORAGE-8000-6E.action" 120msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 121# 122# code: STORAGE-8000-7J 123# keys: fault.device.sas-expander.fail 124# 125msgid "STORAGE-8000-7J.type" 126msgstr "Fault" 127msgid "STORAGE-8000-7J.severity" 128msgstr "Major" 129msgid "STORAGE-8000-7J.description" 130msgstr "A SAS expander is not functioning properly.\n" 131msgid "STORAGE-8000-7J.response" 132msgstr "The service required LED on the enclosure will be illuminated.\n" 133msgid "STORAGE-8000-7J.impact" 134msgstr "The SAS fabric is in a degraded state. User data storage is still available.\n" 135msgid "STORAGE-8000-7J.action" 136msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 137# 138# code: STORAGE-8000-8S 139# keys: fault.device.unusable-chassis-id 140# 141msgid "STORAGE-8000-8S.type" 142msgstr "Fault" 143msgid "STORAGE-8000-8S.severity" 144msgstr "Critical" 145msgid "STORAGE-8000-8S.description" 146msgstr "The chassis ID was determined to be unusable.\n" 147msgid "STORAGE-8000-8S.response" 148msgstr "The service required LED on the enclosure will be illuminated.\n" 149msgid "STORAGE-8000-8S.impact" 150msgstr "The SAS fabric is down, and user data storage is unavailable.\n" 151msgid "STORAGE-8000-8S.action" 152msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 153# 154# code: STORAGE-8000-95 155# keys: fault.io.i2c.fail 156# 157msgid "STORAGE-8000-95.type" 158msgstr "Fault" 159msgid "STORAGE-8000-95.severity" 160msgstr "Critical" 161msgid "STORAGE-8000-95.description" 162msgstr "An I2C bus failure has occurred.\n" 163msgid "STORAGE-8000-95.response" 164msgstr "The service required LED on the enclosure will be illuminated.\n" 165msgid "STORAGE-8000-95.impact" 166msgstr "The system is in an unknown state.\n" 167msgid "STORAGE-8000-95.action" 168msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 169# 170# code: STORAGE-8000-AP 171# keys: fault.io.i2c.poweron-fail 172# 173msgid "STORAGE-8000-AP.type" 174msgstr "Fault" 175msgid "STORAGE-8000-AP.severity" 176msgstr "Critical" 177msgid "STORAGE-8000-AP.description" 178msgstr "An I2C bus failure has occurred during power-on.\n" 179msgid "STORAGE-8000-AP.response" 180msgstr "The service required LED on the enclosure will be illuminated.\n" 181msgid "STORAGE-8000-AP.impact" 182msgstr "The system is in an unknown state.\n" 183msgid "STORAGE-8000-AP.action" 184msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 185# 186# code: STORAGE-8000-CA 187# keys: fault.io.sas.log.non-fatal 188# 189msgid "STORAGE-8000-CA.type" 190msgstr "Fault" 191msgid "STORAGE-8000-CA.severity" 192msgstr "Major" 193msgid "STORAGE-8000-CA.description" 194msgstr "A SAS expander log failure has occurred.\n" 195msgid "STORAGE-8000-CA.response" 196msgstr "The service required LED on the enclosure will be illuminated.\n" 197msgid "STORAGE-8000-CA.impact" 198msgstr "The system is in an unknown state.\n" 199msgid "STORAGE-8000-CA.action" 200msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 201# 202# code: STORAGE-8000-DH 203# keys: fault.io.sas.log.fatal 204# 205msgid "STORAGE-8000-DH.type" 206msgstr "Fault" 207msgid "STORAGE-8000-DH.severity" 208msgstr "Critical" 209msgid "STORAGE-8000-DH.description" 210msgstr "A SAS expander log failure has occurred.\n" 211msgid "STORAGE-8000-DH.response" 212msgstr "The service required LED on the enclosure will be illuminated.\n" 213msgid "STORAGE-8000-DH.impact" 214msgstr "The system is in an unknown state.\n" 215msgid "STORAGE-8000-DH.action" 216msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 217# 218# code: STORAGE-8000-ED 219# keys: fault.power.fail 220# 221msgid "STORAGE-8000-ED.type" 222msgstr "Fault" 223msgid "STORAGE-8000-ED.severity" 224msgstr "Major" 225msgid "STORAGE-8000-ED.description" 226msgstr "A power failure has occurred.\n" 227msgid "STORAGE-8000-ED.response" 228msgstr "The service required LED on the enclosure will be illuminated.\n" 229msgid "STORAGE-8000-ED.impact" 230msgstr "A device in the enclosure may be getting inadequate power. Subsequent loss of the device may force the enclosure to shutdown.\n" 231msgid "STORAGE-8000-ED.action" 232msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 233# 234# code: STORAGE-8000-FY 235# keys: fault.power.ext-fail 236# 237msgid "STORAGE-8000-FY.type" 238msgstr "Fault" 239msgid "STORAGE-8000-FY.severity" 240msgstr "Major" 241msgid "STORAGE-8000-FY.description" 242msgstr "A power failure external to the enclosure has occurred.\n" 243msgid "STORAGE-8000-FY.response" 244msgstr "The service required LED on the enclosure will be illuminated.\n" 245msgid "STORAGE-8000-FY.impact" 246msgstr "The enclosure may not be getting adequate power. Subsequent loss of power supplies may cause the enclosure to shutdown.\n" 247msgid "STORAGE-8000-FY.action" 248msgstr "Check that external AC power is available and that all the power cords are properly plugged into the enclosure power supplies.\n" 249# 250# code: STORAGE-8000-G3 251# keys: fault.sensor.read-fail 252# 253msgid "STORAGE-8000-G3.type" 254msgstr "Fault" 255msgid "STORAGE-8000-G3.severity" 256msgstr "Major" 257msgid "STORAGE-8000-G3.description" 258msgstr "An attempt to read a sensor failed.\n" 259msgid "STORAGE-8000-G3.response" 260msgstr "The service required LED on the enclosure will be illuminated.\n" 261msgid "STORAGE-8000-G3.impact" 262msgstr "The system is in an unknown state.\n" 263msgid "STORAGE-8000-G3.action" 264msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 265# 266# code: STORAGE-8000-HR 267# keys: fault.sp.fail 268# 269msgid "STORAGE-8000-HR.type" 270msgstr "Fault" 271msgid "STORAGE-8000-HR.severity" 272msgstr "Critical" 273msgid "STORAGE-8000-HR.description" 274msgstr "A Service Processor failed.\n" 275msgid "STORAGE-8000-HR.response" 276msgstr "The service required LED on the enclosure will be illuminated.\n" 277msgid "STORAGE-8000-HR.impact" 278msgstr "The SAS fabric may be in a degraded state.\n" 279msgid "STORAGE-8000-HR.action" 280msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 281# 282# code: STORAGE-8000-J4 283# keys: fault.sp.unavailable 284# 285msgid "STORAGE-8000-J4.type" 286msgstr "Fault" 287msgid "STORAGE-8000-J4.severity" 288msgstr "Major" 289msgid "STORAGE-8000-J4.description" 290msgstr "A Service Processor has detected that its peer is no longer available.\n" 291msgid "STORAGE-8000-J4.response" 292msgstr "The service required LED on the enclosure will be illuminated.\n" 293msgid "STORAGE-8000-J4.impact" 294msgstr "A Root Controller Card failed and redundancy has been lost. The SAS fabric is in a degraded state. User data storage is still available.\n" 295msgid "STORAGE-8000-J4.action" 296msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 297# 298# code: STORAGE-8000-KQ 299# keys: fault.sp.svc-fail 300# 301msgid "STORAGE-8000-KQ.type" 302msgstr "Fault" 303msgid "STORAGE-8000-KQ.severity" 304msgstr "Major" 305msgid "STORAGE-8000-KQ.description" 306msgstr "A Service Processor service failure has occurred.\n" 307msgid "STORAGE-8000-KQ.response" 308msgstr "The service required LED on the enclosure will be illuminated.\n" 309msgid "STORAGE-8000-KQ.impact" 310msgstr "The SAS fabric may be in a degraded state. User data storage is still available.\n" 311msgid "STORAGE-8000-KQ.action" 312msgstr "Refer to the Maintenance page in the Sun ZFS Storage UI to identify the failed component. If a repair is required, the repair instructions are located in the Help section of the Sun ZFS Storage UI.\n" 313# 314# code: STORAGE-8000-LC 315# keys: fault.temp.fail 316# 317msgid "STORAGE-8000-LC.type" 318msgstr "Fault" 319msgid "STORAGE-8000-LC.severity" 320msgstr "Major" 321msgid "STORAGE-8000-LC.description" 322msgstr "Ambient temperature is outside of normal operating range.\n" 323msgid "STORAGE-8000-LC.response" 324msgstr "The service required LED on the enclosure will be illuminated.\n" 325msgid "STORAGE-8000-LC.impact" 326msgstr "A device in the enclosure may be overheating. Subsequent loss of the device may force the enclosure to shutdown.\n" 327msgid "STORAGE-8000-LC.action" 328msgstr "Check that the ambient temperature is adequately cool, and none of the enclosure air inlets are blocked.\n" 329